thorpej 3319ad7b61 XXX TEMPORARY STOP-GAP MEASURE! A 12-bit command modifier was being ... squished into an 8-bit position in a command stream! Which one is wrong? Changed the constant from 0x140 to 0x40, which is what ended up happening anyhow. This exists in the old Utah sources, too! How long has this bug existed?!		1995-12-31 04:11:42 +00:00
..
ac.c	Use a "match/attach" rather than "init" scheme for probing devices.	1995-12-02 18:21:49 +00:00
acioctl.h	new RCS ID format.	1994-10-26 07:22:45 +00:00
acvar.h	new RCS ID format.	1994-10-26 07:22:45 +00:00
ct.c	Use a "match/attach" rather than "init" scheme for probing devices.	1995-12-02 18:21:49 +00:00
ctreg.h	XXX TEMPORARY STOP-GAP MEASURE! A 12-bit command modifier was being	1995-12-31 04:11:42 +00:00
dca.c	Re-work the serial console support a bit; it doesn't depend on statically	1995-12-31 00:27:16 +00:00
dcareg.h	Re-work the serial console support a bit; it doesn't depend on statically	1995-12-31 00:27:16 +00:00
dcm.c	Re-work the serial console support a bit; it doesn't depend on statically	1995-12-31 00:27:16 +00:00
dcmreg.h	new RCS ID format.	1994-10-26 07:22:45 +00:00
device.h	Use a "match/attach" rather than "init" scheme for probing devices.	1995-12-02 18:21:49 +00:00
dma.c	Make the DMA controller driver a little more new config-friendly. Still	1995-12-02 02:46:45 +00:00
dmareg.h	Make the DMA controller driver a little more new config-friendly. Still	1995-12-02 02:46:45 +00:00
dmavar.h	KERNEL -> _KERNEL	1995-03-28 18:13:48 +00:00
fhpib.c	Use a "match/attach" rather than "init" scheme for probing devices.	1995-12-02 18:21:49 +00:00
fhpibreg.h	new RCS ID format.	1994-10-26 07:22:45 +00:00
grf_conf.c	new RCS ID format.	1994-10-26 07:22:45 +00:00
grf_dv.c	new RCS ID format.	1994-10-26 07:22:45 +00:00
grf_dvreg.h	new RCS ID format.	1994-10-26 07:22:45 +00:00
grf_gb.c	new RCS ID format.	1994-10-26 07:22:45 +00:00
grf_gbreg.h	new RCS ID format.	1994-10-26 07:22:45 +00:00
grf_hy.c	new RCS ID format.	1994-10-26 07:22:45 +00:00
grf_hyreg.h	new RCS ID format.	1994-10-26 07:22:45 +00:00
grf_machdep.c	Use a "match/attach" rather than "init" scheme for probing devices.	1995-12-02 18:21:49 +00:00
grf_rb.c	new RCS ID format.	1994-10-26 07:22:45 +00:00
grf_rbreg.h	new RCS ID format.	1994-10-26 07:22:45 +00:00
grf_tc.c	new RCS ID format.	1994-10-26 07:22:45 +00:00
grf_tcreg.h	new RCS ID format.	1994-10-26 07:22:45 +00:00
grf.c	Update a #include for the "new" location of HP-UX emulation code.	1995-11-28 08:12:37 +00:00
grfioctl.h	new RCS ID format.	1994-10-26 07:22:45 +00:00
grfreg.h	new RCS ID format.	1994-10-26 07:22:45 +00:00
grfvar.h	KERNEL -> _KERNEL	1995-03-28 18:13:48 +00:00
hil_keymaps.c	Keymap for the Swedish HIL keyboard, from Tomas Tengling <ltt@cd.chalmers.se>.	1995-12-06 22:13:23 +00:00
hil.c	Change "hilloop" to "hilsoftc" and make slightly more new config-friendly.	1995-12-02 02:48:47 +00:00
hilioctl.h	new RCS ID format.	1994-10-26 07:22:45 +00:00
hilreg.h	new RCS ID format.	1994-10-26 07:22:45 +00:00
hilvar.h	Oops ... missed this file in the last round of device changes.	1995-12-11 19:41:47 +00:00
hpib.c	Use a "match/attach" rather than "init" scheme for probing devices.	1995-12-02 18:21:49 +00:00
hpibvar.h	Do an indirect driver a little more like an indirect driver would like to	1995-11-19 17:57:15 +00:00
if_le.c	Fix something the switch to the MI LANCE code broke: use LE_TINT_HOOK	1995-12-30 21:03:02 +00:00
if_lereg.h	Use the MI LANCE code.	1995-12-10 00:49:33 +00:00
if_levar.h	Fix something the switch to the MI LANCE code broke: use LE_TINT_HOOK	1995-12-30 21:03:02 +00:00
iotypes.h	new RCS ID format.	1994-10-26 07:22:45 +00:00
ite_dv.c	new RCS ID format.	1994-10-26 07:22:45 +00:00
ite_gb.c	new RCS ID format.	1994-10-26 07:22:45 +00:00
ite_hy.c	new RCS ID format.	1994-10-26 07:22:45 +00:00
ite_rb.c	new RCS ID format.	1994-10-26 07:22:45 +00:00
ite_subr.c	new RCS ID format.	1994-10-26 07:22:45 +00:00
ite_tc.c	new RCS ID format.	1994-10-26 07:22:45 +00:00
ite.c	Prevent the ITE_ACTIVE bit from being cleared in iteoff() if the ITE_ISCONS	1995-11-19 23:14:22 +00:00
itereg.h	new RCS ID format.	1994-10-26 07:22:45 +00:00
itevar.h	Prevent the ITE_ACTIVE bit from being cleared in iteoff() if the ITE_ISCONS	1995-11-19 23:14:22 +00:00
kbdmap.h	Keymap for the Swedish HIL keyboard, from Tomas Tengling <ltt@cd.chalmers.se>.	1995-12-06 22:13:23 +00:00
maskbits.h	new RCS ID format.	1994-10-26 07:22:45 +00:00
mt.c	Use a "match/attach" rather than "init" scheme for probing devices.	1995-12-02 18:21:49 +00:00
mtreg.h	Driver for HP 7974a, 7978a/b, 7979a, 7980a, and 7980xc 9-track HP-IB tapes.	1995-10-02 00:28:20 +00:00
nhpib.c	Use a "match/attach" rather than "init" scheme for probing devices.	1995-12-02 18:21:49 +00:00
nhpibreg.h	Various diffs from Mike Hibler; necessary for mt driver.	1995-01-07 10:30:10 +00:00
ppi.c	Use a "match/attach" rather than "init" scheme for probing devices.	1995-12-02 18:21:49 +00:00
ppiioctl.h	new RCS ID format.	1994-10-26 07:22:45 +00:00
rd_compat.c	Re-arrange things such that we can print out disk geometry regardless of	1995-11-19 19:07:18 +00:00
rd.c	Pass the correct number of arguments to readdisklabel().	1995-12-09 07:31:03 +00:00
rdreg.h	XXX TEMPORARY STOP-GAP MEASURE! A 12-bit command modifier was being	1995-12-31 04:11:42 +00:00
rdvar.h	Re-arrange things such that we can print out disk geometry regardless of	1995-11-19 19:07:18 +00:00
scsi.c	Use a "match/attach" rather than "init" scheme for probing devices.	1995-12-02 18:21:49 +00:00
scsireg.h	new RCS ID format.	1994-10-26 07:22:45 +00:00
scsivar.h	Use a "match/attach" rather than "init" scheme for probing devices.	1995-12-02 18:21:49 +00:00
sd_compat.c	new RCS ID format.	1994-10-26 07:22:45 +00:00
sd.c	Pass the correct number of arguments to readdisklabel().	1995-12-09 07:31:03 +00:00
sdvar.h	Be a tad bit more informative when the drive is attached. Print geometry	1995-10-15 10:03:18 +00:00
st.c	Use a "match/attach" rather than "init" scheme for probing devices.	1995-12-02 18:21:49 +00:00
stvar.h	new RCS ID format.	1994-10-26 07:22:45 +00:00