440 lines
12 KiB
C
440 lines
12 KiB
C
/* $NetBSD: malta_intr.c,v 1.9 2003/07/15 01:37:33 lukem Exp $ */
|
|
|
|
/*
|
|
* Copyright 2001, 2002 Wasabi Systems, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* Written by Jason R. Thorpe and Simon Burge for Wasabi Systems, Inc.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed for the NetBSD Project by
|
|
* Wasabi Systems, Inc.
|
|
* 4. The name of Wasabi Systems, Inc. may not be used to endorse
|
|
* or promote products derived from this software without specific prior
|
|
* written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Platform-specific interrupt support for the MIPS Malta.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: malta_intr.c,v 1.9 2003/07/15 01:37:33 lukem Exp $");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/device.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
|
|
#include <mips/locore.h>
|
|
|
|
#include <evbmips/evbmips/clockvar.h>
|
|
|
|
#include <evbmips/malta/maltavar.h>
|
|
#include <evbmips/malta/pci/pcibvar.h>
|
|
|
|
#include <dev/ic/mc146818reg.h> /* for malta_cal_timer() */
|
|
|
|
#include <dev/isa/isavar.h>
|
|
#include <dev/pci/pciidereg.h>
|
|
|
|
/*
|
|
* This is a mask of bits to clear in the SR when we go to a
|
|
* given hardware interrupt priority level.
|
|
*/
|
|
const u_int32_t ipl_sr_bits[_IPL_N] = {
|
|
0, /* 0: IPL_NONE */
|
|
|
|
MIPS_SOFT_INT_MASK_0, /* 1: IPL_SOFT */
|
|
|
|
MIPS_SOFT_INT_MASK_0, /* 2: IPL_SOFTCLOCK */
|
|
|
|
MIPS_SOFT_INT_MASK_0|
|
|
MIPS_SOFT_INT_MASK_1, /* 3: IPL_SOFTNET */
|
|
|
|
MIPS_SOFT_INT_MASK_0|
|
|
MIPS_SOFT_INT_MASK_1, /* 4: IPL_SOFTSERIAL */
|
|
|
|
MIPS_SOFT_INT_MASK_0|
|
|
MIPS_SOFT_INT_MASK_1|
|
|
MIPS_INT_MASK_0, /* 5: IPL_BIO */
|
|
|
|
MIPS_SOFT_INT_MASK_0|
|
|
MIPS_SOFT_INT_MASK_1|
|
|
MIPS_INT_MASK_0, /* 6: IPL_NET */
|
|
|
|
MIPS_SOFT_INT_MASK_0|
|
|
MIPS_SOFT_INT_MASK_1|
|
|
MIPS_INT_MASK_0, /* 7: IPL_{TTY,SERIAL} */
|
|
|
|
MIPS_SOFT_INT_MASK_0|
|
|
MIPS_SOFT_INT_MASK_1|
|
|
MIPS_INT_MASK_0|
|
|
MIPS_INT_MASK_1|
|
|
MIPS_INT_MASK_2|
|
|
MIPS_INT_MASK_3|
|
|
MIPS_INT_MASK_4|
|
|
MIPS_INT_MASK_5, /* 8: IPL_{CLOCK,HIGH} */
|
|
};
|
|
|
|
/*
|
|
* This is a mask of bits to clear in the SR when we go to a
|
|
* given software interrupt priority level.
|
|
* Hardware ipls are port/board specific.
|
|
*/
|
|
const u_int32_t mips_ipl_si_to_sr[_IPL_NSOFT] = {
|
|
MIPS_SOFT_INT_MASK_0, /* IPL_SOFT */
|
|
MIPS_SOFT_INT_MASK_0, /* IPL_SOFTCLOCK */
|
|
MIPS_SOFT_INT_MASK_1, /* IPL_SOFTNET */
|
|
MIPS_SOFT_INT_MASK_1, /* IPL_SOFTSERIAL */
|
|
};
|
|
|
|
struct malta_cpuintr {
|
|
LIST_HEAD(, evbmips_intrhand) cintr_list;
|
|
struct evcnt cintr_count;
|
|
};
|
|
#define NINTRS 5 /* MIPS INT0 - INT4 */
|
|
|
|
struct malta_cpuintr malta_cpuintrs[NINTRS];
|
|
const char *malta_cpuintrnames[NINTRS] = {
|
|
"int 0 (piix4)",
|
|
"int 1 (smi)",
|
|
"int 2 (uart)",
|
|
"int 3 (core hi/gt64120)",
|
|
"int 4 (core lo)",
|
|
};
|
|
|
|
static int malta_pci_intr_map(struct pci_attach_args *, pci_intr_handle_t *);
|
|
static const char
|
|
*malta_pci_intr_string(void *, pci_intr_handle_t);
|
|
static const struct evcnt
|
|
*malta_pci_intr_evcnt(void *, pci_intr_handle_t);
|
|
static void *malta_pci_intr_establish(void *, pci_intr_handle_t, int,
|
|
int (*)(void *), void *);
|
|
static void malta_pci_intr_disestablish(void *, void *);
|
|
static void malta_pci_conf_interrupt(void *, int, int, int, int, int *);
|
|
static void *malta_pciide_compat_intr_establish(void *, struct device *,
|
|
struct pci_attach_args *, int, int (*)(void *), void *);
|
|
|
|
void
|
|
evbmips_intr_init(void)
|
|
{
|
|
struct malta_config *mcp = &malta_configuration;
|
|
int i;
|
|
|
|
for (i = 0; i < NINTRS; i++) {
|
|
LIST_INIT(&malta_cpuintrs[i].cintr_list);
|
|
evcnt_attach_dynamic(&malta_cpuintrs[i].cintr_count,
|
|
EVCNT_TYPE_INTR, NULL, "mips", malta_cpuintrnames[i]);
|
|
}
|
|
|
|
mcp->mc_pc.pc_intr_v = NULL;
|
|
mcp->mc_pc.pc_intr_map = malta_pci_intr_map;
|
|
mcp->mc_pc.pc_intr_string = malta_pci_intr_string;
|
|
mcp->mc_pc.pc_intr_evcnt = malta_pci_intr_evcnt;
|
|
mcp->mc_pc.pc_intr_establish = malta_pci_intr_establish;
|
|
mcp->mc_pc.pc_intr_disestablish = malta_pci_intr_disestablish;
|
|
mcp->mc_pc.pc_conf_interrupt = malta_pci_conf_interrupt;
|
|
mcp->mc_pc.pc_pciide_compat_intr_establish =
|
|
malta_pciide_compat_intr_establish;
|
|
}
|
|
|
|
void
|
|
malta_cal_timer(bus_space_tag_t st, bus_space_handle_t sh)
|
|
{
|
|
uint32_t ctrdiff[4], startctr, endctr;
|
|
u_int8_t regc;
|
|
int i;
|
|
|
|
/* Disable interrupts first. */
|
|
bus_space_write_1(st, sh, 0, MC_REGB);
|
|
bus_space_write_1(st, sh, 1, MC_REGB_SQWE | MC_REGB_BINARY |
|
|
MC_REGB_24HR);
|
|
|
|
/* Initialize for 16Hz. */
|
|
bus_space_write_1(st, sh, 0, MC_REGA);
|
|
bus_space_write_1(st, sh, 1, MC_BASE_32_KHz | MC_RATE_16_Hz);
|
|
|
|
/* Run the loop an extra time to prime the cache. */
|
|
for (i = 0; i < 4; i++) {
|
|
// led_display('h', 'z', '0' + i, ' ');
|
|
|
|
/* Enable the interrupt. */
|
|
bus_space_write_1(st, sh, 0, MC_REGB);
|
|
bus_space_write_1(st, sh, 1, MC_REGB_PIE | MC_REGB_SQWE |
|
|
MC_REGB_BINARY | MC_REGB_24HR);
|
|
|
|
/* Go to REGC. */
|
|
bus_space_write_1(st, sh, 0, MC_REGC);
|
|
|
|
/* Wait for it to happen. */
|
|
startctr = mips3_cp0_count_read();
|
|
do {
|
|
regc = bus_space_read_1(st, sh, 1);
|
|
endctr = mips3_cp0_count_read();
|
|
} while ((regc & MC_REGC_IRQF) == 0);
|
|
|
|
/* Already ACK'd. */
|
|
|
|
/* Disable. */
|
|
bus_space_write_1(st, sh, 0, MC_REGB);
|
|
bus_space_write_1(st, sh, 1, MC_REGB_SQWE | MC_REGB_BINARY |
|
|
MC_REGB_24HR);
|
|
|
|
ctrdiff[i] = endctr - startctr;
|
|
}
|
|
|
|
/* Compute the number of cycles per second. */
|
|
curcpu()->ci_cpu_freq = ((ctrdiff[2] + ctrdiff[3]) / 2) * 16/*Hz*/;
|
|
|
|
/* Compute the number of ticks for hz. */
|
|
curcpu()->ci_cycles_per_hz = (curcpu()->ci_cpu_freq + hz / 2) / hz;
|
|
|
|
/* Compute the delay divisor and reciprical. */
|
|
curcpu()->ci_divisor_delay =
|
|
((curcpu()->ci_cpu_freq + 500000) / 1000000);
|
|
MIPS_SET_CI_RECIPRICAL(curcpu());
|
|
|
|
/*
|
|
* Get correct cpu frequency if the CPU runs at twice the
|
|
* external/cp0-count frequency.
|
|
*/
|
|
if (mips_cpu_flags & CPU_MIPS_DOUBLE_COUNT)
|
|
curcpu()->ci_cpu_freq *= 2;
|
|
|
|
#ifdef DEBUG
|
|
printf("Timer calibration: %lu cycles/sec [(%u, %u) * 16]\n",
|
|
curcpu()->ci_cpu_freq, ctrdiff[2], ctrdiff[3]);
|
|
#endif
|
|
}
|
|
|
|
void *
|
|
evbmips_intr_establish(int irq, int (*func)(void *), void *arg)
|
|
{
|
|
struct evbmips_intrhand *ih;
|
|
int s;
|
|
|
|
ih = malloc(sizeof(*ih), M_DEVBUF, M_NOWAIT);
|
|
if (ih == NULL)
|
|
return (NULL);
|
|
|
|
ih->ih_func = func;
|
|
ih->ih_arg = arg;
|
|
|
|
s = splhigh();
|
|
|
|
/*
|
|
* Link it into the tables.
|
|
*/
|
|
LIST_INSERT_HEAD(&malta_cpuintrs[0].cintr_list, ih, ih_q);
|
|
|
|
/* XXX - should check that MIPS_INT_MASK_0 is set... */
|
|
|
|
splx(s);
|
|
|
|
return (ih);
|
|
}
|
|
|
|
void
|
|
evbmips_intr_disestablish(void *arg)
|
|
{
|
|
struct evbmips_intrhand *ih = arg;
|
|
int s;
|
|
|
|
s = splhigh();
|
|
|
|
/*
|
|
* First, remove it from the table.
|
|
*/
|
|
LIST_REMOVE(ih, ih_q);
|
|
|
|
/* XXX - disable MIPS_INT_MASK_0 if list is empty? */
|
|
|
|
splx(s);
|
|
|
|
free(ih, M_DEVBUF);
|
|
}
|
|
|
|
void
|
|
evbmips_iointr(uint32_t status, uint32_t cause, uint32_t pc, uint32_t ipending)
|
|
{
|
|
struct evbmips_intrhand *ih;
|
|
|
|
/* Check for error interrupts (SMI, GT64120) */
|
|
if (ipending & (MIPS_INT_MASK_1 | MIPS_INT_MASK_3)) {
|
|
if (ipending & MIPS_INT_MASK_1)
|
|
panic("piix4 SMI interrupt");
|
|
if (ipending & MIPS_INT_MASK_3)
|
|
panic("gt64120 error interrupt");
|
|
}
|
|
|
|
/*
|
|
* Read the interrupt pending registers, mask them with the
|
|
* ones we have enabled, and service them in order of decreasing
|
|
* priority.
|
|
*/
|
|
if (ipending & MIPS_INT_MASK_0) {
|
|
/* All interrupts are gated through MIPS HW interrupt 0 */
|
|
malta_cpuintrs[0].cintr_count.ev_count++;
|
|
LIST_FOREACH(ih, &malta_cpuintrs[0].cintr_list, ih_q)
|
|
(*ih->ih_func)(ih->ih_arg);
|
|
cause &= ~MIPS_INT_MASK_0;
|
|
}
|
|
|
|
/* Re-enable anything that we have processed. */
|
|
_splset(MIPS_SR_INT_IE | ((status & ~cause) & MIPS_HARD_INT_MASK));
|
|
}
|
|
|
|
/*
|
|
* YAMON configures pa_intrline correctly (so far), so we trust it to DTRT
|
|
* in the future...
|
|
*/
|
|
#undef YAMON_IRQ_MAP_BAD
|
|
|
|
/*
|
|
* PCI interrupt support
|
|
*/
|
|
static int
|
|
malta_pci_intr_map(struct pci_attach_args *pa, pci_intr_handle_t *ihp)
|
|
{
|
|
#ifdef YAMON_IRQ_MAP_BAD
|
|
static const int pciirqmap[12/*device*/][4/*pin*/] = {
|
|
{ -1, -1, -1, 11 }, /* 10: USB */
|
|
{ 10, -1, -1, -1 }, /* 11: Ethernet */
|
|
{ 11, -1, -1, -1 }, /* 12: Audio */
|
|
{ -1, -1, -1, -1 }, /* 13: not used */
|
|
{ -1, -1, -1, -1 }, /* 14: not used */
|
|
{ -1, -1, -1, -1 }, /* 15: not used */
|
|
{ -1, -1, -1, -1 }, /* 16: not used */
|
|
{ -1, -1, -1, -1 }, /* 17: Core card(?) */
|
|
{ 10, 10, 11, 11 }, /* 18: PCI Slot 1 */
|
|
{ 10, 11, 11, 10 }, /* 19: PCI Slot 2 */
|
|
{ 11, 11, 10, 10 }, /* 20: PCI Slot 3 */
|
|
{ 11, 10, 10, 11 }, /* 21: PCI Slot 4 */
|
|
};
|
|
int buspin, device, irq;
|
|
#else /* !YAMON_IRQ_MAP_BAD */
|
|
int buspin;
|
|
#endif /* !YAMON_IRQ_MAP_BAD */
|
|
|
|
buspin = pa->pa_intrpin;
|
|
|
|
if (buspin == 0) {
|
|
/* No IRQ used. */
|
|
return (1);
|
|
}
|
|
|
|
if (buspin > 4) {
|
|
printf("malta_pci_intr_map: bad interrupt pin %d\n", buspin);
|
|
return (1);
|
|
}
|
|
|
|
#ifdef YAMON_IRQ_MAP_BAD
|
|
pci_decompose_tag(pa->pa_pc, pa->pa_intrtag, NULL, &device, NULL);
|
|
|
|
if (device < 10 || device > 21) {
|
|
printf("malta_pci_intr_map: bad device %d\n", device);
|
|
return (1);
|
|
}
|
|
|
|
irq = pciirqmap[device - 10][buspin - 1];
|
|
if (irq == -1) {
|
|
printf("malta_pci_intr_map: no mapping for device %d pin %d\n",
|
|
device, buspin);
|
|
return (1);
|
|
}
|
|
|
|
*ihp = irq;
|
|
#else /* !YAMON_IRQ_MAP_BAD */
|
|
*ihp = pa->pa_intrline;
|
|
#endif /* !YAMON_IRQ_MAP_BAD */
|
|
return (0);
|
|
}
|
|
|
|
static const char *
|
|
malta_pci_intr_string(void *v, pci_intr_handle_t irq)
|
|
{
|
|
|
|
return (isa_intr_string(pcib_ic, irq));
|
|
}
|
|
|
|
static const struct evcnt *
|
|
malta_pci_intr_evcnt(void *v, pci_intr_handle_t irq)
|
|
{
|
|
|
|
return (isa_intr_evcnt(pcib_ic, irq));
|
|
}
|
|
|
|
static void *
|
|
malta_pci_intr_establish(void *v, pci_intr_handle_t irq, int level,
|
|
int (*func)(void *), void *arg)
|
|
{
|
|
|
|
return (isa_intr_establish(pcib_ic, irq, IST_LEVEL, level, func, arg));
|
|
}
|
|
|
|
static void
|
|
malta_pci_intr_disestablish(void *v, void *arg)
|
|
{
|
|
|
|
return (isa_intr_disestablish(pcib_ic, arg));
|
|
}
|
|
|
|
static void
|
|
malta_pci_conf_interrupt(void *v, int bus, int dev, int func, int swiz,
|
|
int *iline)
|
|
{
|
|
|
|
/*
|
|
* We actually don't need to do anything; everything is handled
|
|
* in pci_intr_map().
|
|
*/
|
|
*iline = 0;
|
|
}
|
|
|
|
void *
|
|
malta_pciide_compat_intr_establish(void *v, struct device *dev,
|
|
struct pci_attach_args *pa, int chan, int (*func)(void *), void *arg)
|
|
{
|
|
pci_chipset_tag_t pc = pa->pa_pc;
|
|
void *cookie;
|
|
int bus, irq;
|
|
|
|
pci_decompose_tag(pc, pa->pa_tag, &bus, NULL, NULL);
|
|
|
|
/*
|
|
* If this isn't PCI bus #0, all bets are off.
|
|
*/
|
|
if (bus != 0)
|
|
return (NULL);
|
|
|
|
irq = PCIIDE_COMPAT_IRQ(chan);
|
|
cookie = isa_intr_establish(pcib_ic, irq, IST_EDGE, IPL_BIO, func, arg);
|
|
if (cookie == NULL)
|
|
return (NULL);
|
|
printf("%s: %s channel interrupting at %s\n", dev->dv_xname,
|
|
PCIIDE_CHANNEL_NAME(chan), malta_pci_intr_string(v, irq));
|
|
return (cookie);
|
|
}
|