NetBSD/sys/netinet6/in6_pcb.h

208 lines
8.9 KiB
C

/* $NetBSD: in6_pcb.h,v 1.52 2020/09/08 14:12:57 christos Exp $ */
/* $KAME: in6_pcb.h,v 1.45 2001/02/09 05:59:46 itojun Exp $ */
/*
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Copyright (c) 1982, 1986, 1990, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)in_pcb.h 8.1 (Berkeley) 6/10/93
*/
#ifndef _NETINET6_IN6_PCB_H_
#define _NETINET6_IN6_PCB_H_
#include <sys/queue.h>
#include <netinet/in_pcb_hdr.h>
#include <netinet/ip6.h>
/*
* Common structure pcb for internet protocol implementation.
* Here are stored pointers to local and foreign host table
* entries, local and foreign socket numbers, and pointers
* up (to a socket structure) and down (to a protocol-specific)
* control block.
*/
struct icmp6_filter;
struct in6pcb {
struct inpcb_hdr in6p_head;
#define in6p_hash in6p_head.inph_hash
#define in6p_queue in6p_head.inph_queue
#define in6p_af in6p_head.inph_af
#define in6p_ppcb in6p_head.inph_ppcb
#define in6p_state in6p_head.inph_state
#define in6p_portalgo in6p_head.inph_portalgo
#define in6p_socket in6p_head.inph_socket
#define in6p_table in6p_head.inph_table
#define in6p_sp in6p_head.inph_sp
struct route in6p_route; /* placeholder for routing entry */
u_int16_t in6p_fport; /* foreign port */
u_int16_t in6p_lport; /* local port */
u_int32_t in6p_flowinfo; /* priority and flowlabel */
int in6p_flags; /* generic IP6/datagram flags */
int in6p_hops; /* default hop limit */
struct ip6_hdr in6p_ip6; /* header prototype */
struct mbuf *in6p_options; /* IP6 options */
struct ip6_pktopts *in6p_outputopts; /* IP6 options for outgoing packets */
struct ip6_moptions *in6p_moptions; /* IP6 multicast options */
struct icmp6_filter *in6p_icmp6filt;
int in6p_cksum; /* IPV6_CHECKSUM setsockopt */
bool in6p_bindportonsend;
struct ip_moptions *in6p_v4moptions;/* IP4 multicast options */
pcb_overudp_cb_t in6p_overudp_cb;
void *in6p_overudp_arg;
};
#define in6p_faddr in6p_ip6.ip6_dst
#define in6p_laddr in6p_ip6.ip6_src
#define in6p_lock(in6p) solock((in6p)->in6p_socket)
#define in6p_unlock(in6p) sounlock((in6p)->in6p_socket)
#define in6p_locked(in6p) solocked((in6p)->in6p_socket)
/* states in inp_state: */
#define IN6P_ATTACHED INP_ATTACHED
#define IN6P_BOUND INP_BOUND
#define IN6P_CONNECTED INP_CONNECTED
/*
* Flags in in6p_flags
* We define KAME's original flags in higher 16 bits as much as possible
* for compatibility with *bsd*s.
*/
#define IN6P_RECVOPTS 0x00001000 /* receive incoming IP6 options */
#define IN6P_RECVRETOPTS 0x00002000 /* receive IP6 options for reply */
#define IN6P_RECVDSTADDR 0x00004000 /* receive IP6 dst address */
#define IN6P_IPV6_V6ONLY 0x00008000 /* restrict AF_INET6 socket for v6 */
#define IN6P_PKTINFO 0x00010000 /* receive IP6 dst and I/F */
#define IN6P_HOPLIMIT 0x00020000 /* receive hoplimit */
#define IN6P_HOPOPTS 0x00040000 /* receive hop-by-hop options */
#define IN6P_DSTOPTS 0x00080000 /* receive dst options after rthdr */
#define IN6P_RTHDR 0x00100000 /* receive routing header */
#define IN6P_RTHDRDSTOPTS 0x00200000 /* receive dstoptions before rthdr */
#define IN6P_TCLASS 0x00400000 /* traffic class */
#define IN6P_BINDANY 0x00800000 /* allow bind to any address */
#define IN6P_HIGHPORT 0x01000000 /* user wants "high" port binding */
#define IN6P_LOWPORT 0x02000000 /* user wants "low" port binding */
#define IN6P_ANONPORT 0x04000000 /* port chosen for user */
#define IN6P_FAITH 0x08000000 /* accept FAITH'ed connections */
/* XXX should move to an UDP control block */
#define IN6P_ESPINUDP INP_ESPINUDP /* ESP over UDP for NAT-T */
#define IN6P_RFC2292 0x40000000 /* RFC2292 */
#define IN6P_MTU 0x80000000 /* use minimum MTU */
#define IN6P_CONTROLOPTS (IN6P_PKTINFO|IN6P_HOPLIMIT|IN6P_HOPOPTS|\
IN6P_DSTOPTS|IN6P_RTHDR|IN6P_RTHDRDSTOPTS|\
IN6P_TCLASS|IN6P_RFC2292|\
IN6P_MTU)
#ifdef _KERNEL
/* compute hash value for foreign and local in6_addr and port */
#define IN6_HASH(faddr, fport, laddr, lport) \
(((faddr)->s6_addr32[0] ^ (faddr)->s6_addr32[1] ^ \
(faddr)->s6_addr32[2] ^ (faddr)->s6_addr32[3] ^ \
(laddr)->s6_addr32[0] ^ (laddr)->s6_addr32[1] ^ \
(laddr)->s6_addr32[2] ^ (laddr)->s6_addr32[3]) \
+ (fport) + (lport))
#define sotoin6pcb(so) ((struct in6pcb *)(so)->so_pcb)
void in6_losing(struct in6pcb *);
void in6_pcbinit(struct inpcbtable *, int, int);
int in6_pcballoc(struct socket *, void *);
int in6_pcbbind(void *, struct sockaddr_in6 *, struct lwp *);
int in6_pcbconnect(void *, struct sockaddr_in6 *, struct lwp *);
void in6_pcbdetach(struct in6pcb *);
void in6_pcbdisconnect(struct in6pcb *);
struct in6pcb *in6_pcblookup_port(struct inpcbtable *, struct in6_addr *,
u_int, int, struct vestigial_inpcb *);
int in6_pcbnotify(struct inpcbtable *, const struct sockaddr *,
u_int, const struct sockaddr *, u_int, int, void *,
void (*)(struct in6pcb *, int));
void in6_pcbpurgeif0(struct inpcbtable *, struct ifnet *);
void in6_pcbpurgeif(struct inpcbtable *, struct ifnet *);
void in6_pcbstate(struct in6pcb *, int);
void in6_rtchange(struct in6pcb *, int);
void in6_setpeeraddr(struct in6pcb *, struct sockaddr_in6 *);
void in6_setsockaddr(struct in6pcb *, struct sockaddr_in6 *);
/* in in6_src.c */
int in6_selecthlim(struct in6pcb *, struct ifnet *);
int in6_selecthlim_rt(struct in6pcb *);
int in6_pcbsetport(struct sockaddr_in6 *, struct in6pcb *, struct lwp *);
extern struct rtentry *
in6_pcbrtentry(struct in6pcb *);
extern void
in6_pcbrtentry_unref(struct rtentry *, struct in6pcb *);
extern struct in6pcb *in6_pcblookup_connect(struct inpcbtable *,
const struct in6_addr *, u_int, const struct in6_addr *, u_int, int,
struct vestigial_inpcb *);
extern struct in6pcb *in6_pcblookup_bind(struct inpcbtable *,
const struct in6_addr *, u_int, int);
static inline void
in6_pcb_register_overudp_cb(struct in6pcb *in6p, pcb_overudp_cb_t cb, void *arg)
{
in6p->in6p_overudp_cb = cb;
in6p->in6p_overudp_arg = arg;
}
#endif /* _KERNEL */
#endif /* !_NETINET6_IN6_PCB_H_ */