1039 lines
36 KiB
C
1039 lines
36 KiB
C
/* $NetBSD: cpuregs.h,v 1.88 2011/10/29 18:56:49 jakllsch Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 2009 Miodrag Vallat.
|
|
*
|
|
* Permission to use, copy, modify, and distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
/*
|
|
* Copyright (c) 1992, 1993
|
|
* The Regents of the University of California. All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* Ralph Campbell and Rick Macklem.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)machConst.h 8.1 (Berkeley) 6/10/93
|
|
*
|
|
* machConst.h --
|
|
*
|
|
* Machine dependent constants.
|
|
*
|
|
* Copyright (C) 1989 Digital Equipment Corporation.
|
|
* Permission to use, copy, modify, and distribute this software and
|
|
* its documentation for any purpose and without fee is hereby granted,
|
|
* provided that the above copyright notice appears in all copies.
|
|
* Digital Equipment Corporation makes no representations about the
|
|
* suitability of this software for any purpose. It is provided "as is"
|
|
* without express or implied warranty.
|
|
*
|
|
* from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machConst.h,
|
|
* v 9.2 89/10/21 15:55:22 jhh Exp SPRITE (DECWRL)
|
|
* from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machAddrs.h,
|
|
* v 1.2 89/08/15 18:28:21 rab Exp SPRITE (DECWRL)
|
|
* from: Header: /sprite/src/kernel/vm/ds3100.md/RCS/vmPmaxConst.h,
|
|
* v 9.1 89/09/18 17:33:00 shirriff Exp SPRITE (DECWRL)
|
|
*/
|
|
|
|
#ifndef _MIPS_CPUREGS_H_
|
|
#define _MIPS_CPUREGS_H_
|
|
|
|
#include <sys/cdefs.h> /* For __CONCAT() */
|
|
|
|
#if defined(_KERNEL_OPT)
|
|
#include "opt_cputype.h"
|
|
#endif
|
|
|
|
/*
|
|
* Address space.
|
|
* 32-bit mips CPUS partition their 32-bit address space into four segments:
|
|
*
|
|
* kuseg 0x00000000 - 0x7fffffff User virtual mem, mapped
|
|
* kseg0 0x80000000 - 0x9fffffff Physical memory, cached, unmapped
|
|
* kseg1 0xa0000000 - 0xbfffffff Physical memory, uncached, unmapped
|
|
* kseg2 0xc0000000 - 0xffffffff kernel-virtual, mapped
|
|
*
|
|
* mips1 physical memory is limited to 512Mbytes, which is
|
|
* doubly mapped in kseg0 (cached) and kseg1 (uncached.)
|
|
* Caching of mapped addresses is controlled by bits in the TLB entry.
|
|
*/
|
|
|
|
#ifdef _LP64
|
|
#define MIPS_XUSEG_START (0L << 62)
|
|
#define MIPS_XUSEG_P(x) (((uint64_t)(x) >> 62) == 0)
|
|
#define MIPS_USEG_P(x) ((uintptr_t)(x) < 0x80000000L)
|
|
#define MIPS_XSSEG_START (1L << 62)
|
|
#define MIPS_XSSEG_P(x) (((uint64_t)(x) >> 62) == 1)
|
|
#endif
|
|
|
|
/*
|
|
* MIPS addresses are signed and we defining as negative so that
|
|
* in LP64 kern they get sign-extended correctly.
|
|
*/
|
|
#ifndef _LOCORE
|
|
#define MIPS_KSEG0_START (-0x7fffffffL-1) /* 0x80000000 */
|
|
#define MIPS_KSEG1_START -0x60000000L /* 0xa0000000 */
|
|
#define MIPS_KSEG2_START -0x40000000L /* 0xc0000000 */
|
|
#define MIPS_MAX_MEM_ADDR -0x42000000L /* 0xbe000000 */
|
|
#define MIPS_RESERVED_ADDR -0x40380000L /* 0xbfc80000 */
|
|
#endif
|
|
|
|
#define MIPS_PHYS_MASK 0x1fffffff
|
|
|
|
#define MIPS_KSEG0_TO_PHYS(x) ((uintptr_t)(x) & MIPS_PHYS_MASK)
|
|
#define MIPS_PHYS_TO_KSEG0(x) ((uintptr_t)(x) | (intptr_t)MIPS_KSEG0_START)
|
|
#define MIPS_KSEG1_TO_PHYS(x) ((uintptr_t)(x) & MIPS_PHYS_MASK)
|
|
#define MIPS_PHYS_TO_KSEG1(x) ((uintptr_t)(x) | (intptr_t)MIPS_KSEG1_START)
|
|
|
|
#define MIPS_KSEG0_P(x) (((intptr_t)(x) & ~MIPS_PHYS_MASK) == MIPS_KSEG0_START)
|
|
#define MIPS_KSEG1_P(x) (((intptr_t)(x) & ~MIPS_PHYS_MASK) == MIPS_KSEG1_START)
|
|
#define MIPS_KSEG2_P(x) ((uintptr_t)MIPS_KSEG2_START <= (uintptr_t)(x))
|
|
|
|
/* Map virtual address to index in mips3 r4k virtually-indexed cache */
|
|
#define MIPS3_VA_TO_CINDEX(x) \
|
|
(((intptr_t)(x) & 0xffffff) | MIPS_KSEG0_START)
|
|
|
|
#ifndef _LOCORE
|
|
#define MIPS_XSEG_MASK (0x3fffffffffffffffLL)
|
|
#define MIPS_XKSEG_START (0x3ULL << 62)
|
|
#define MIPS_XKSEG_P(x) (((uint64_t)(x) >> 62) == 3)
|
|
|
|
#define MIPS_XKPHYS_START (0x2ULL << 62)
|
|
#define MIPS_PHYS_TO_XKPHYS_UNCACHED(x) \
|
|
(MIPS_XKPHYS_START | ((uint64_t)(CCA_UNCACHED) << 59) | (x))
|
|
#define MIPS_PHYS_TO_XKPHYS_ACC(x) \
|
|
(MIPS_XKPHYS_START | ((uint64_t)(mips_options.mips3_cca_devmem) << 59) | (x))
|
|
#define MIPS_PHYS_TO_XKPHYS_CACHED(x) \
|
|
(mips_options.mips3_xkphys_cached | (x))
|
|
#define MIPS_PHYS_TO_XKPHYS(cca,x) \
|
|
(MIPS_XKPHYS_START | ((uint64_t)(cca) << 59) | (x))
|
|
#define MIPS_XKPHYS_TO_PHYS(x) ((uint64_t)(x) & 0x07ffffffffffffffLL)
|
|
#define MIPS_XKPHYS_TO_CCA(x) (((uint64_t)(x) >> 59) & 7)
|
|
#define MIPS_XKPHYS_P(x) (((uint64_t)(x) >> 62) == 2)
|
|
#endif /* _LOCORE */
|
|
|
|
#define CCA_UNCACHED 2
|
|
#define CCA_CACHEABLE 3 /* cacheable non-coherent */
|
|
#define CCA_ACCEL 7 /* non-cached, write combining */
|
|
|
|
/* CPU dependent mtc0 hazard hook */
|
|
#if (MIPS32R2 + MIPS64R2) > 0
|
|
# if (MIPS1 + MIPS3 + MIPS32 + MIPS64) == 0
|
|
# define COP0_SYNC sll $0,$0,3 /* EHB */
|
|
# define JR_HB_RA .set push; .set mips32r2; jr.hb ra; nop; .set pop
|
|
# else
|
|
# define COP0_SYNC sll $0,$0,1; sll $0,$0,1; sll $0,$0,3
|
|
# define JR_HB_RA sll $0,$0,1; sll $0,$0,1; jr ra; sll $0,$0,3
|
|
# endif
|
|
#elif (MIPS32 + MIPS64) > 0
|
|
# define COP0_SYNC sll $0,$0,1; sll $0,$0,1; sll $0,$0,1
|
|
# define JR_HB_RA sll $0,$0,1; sll $0,$0,1; jr ra; sll $0,$0,1
|
|
#elif MIPS3 > 0
|
|
# define COP0_SYNC nop; nop; nop
|
|
# define JR_HB_RA nop; nop; jr ra; nop
|
|
#else
|
|
# define COP0_SYNC nop
|
|
# define JR_HB_RA jr ra; nop
|
|
#endif
|
|
#define COP0_HAZARD_FPUENABLE nop; nop; nop; nop;
|
|
|
|
/*
|
|
* The bits in the cause register.
|
|
*
|
|
* Bits common to r3000 and r4000:
|
|
*
|
|
* MIPS_CR_BR_DELAY Exception happened in branch delay slot.
|
|
* MIPS_CR_COP_ERR Coprocessor error.
|
|
* MIPS_CR_IP Interrupt pending bits defined below.
|
|
* (same meaning as in CAUSE register).
|
|
* MIPS_CR_EXC_CODE The exception type (see exception codes below).
|
|
*
|
|
* Differences:
|
|
* r3k has 4 bits of exception type, r4k has 5 bits.
|
|
*/
|
|
#define MIPS_CR_BR_DELAY 0x80000000
|
|
#define MIPS_CR_COP_ERR 0x30000000
|
|
#define MIPS1_CR_EXC_CODE 0x0000003C /* four bits */
|
|
#define MIPS3_CR_EXC_CODE 0x0000007C /* five bits */
|
|
#define MIPS_CR_IP 0x0000FF00
|
|
#define MIPS_CR_EXC_CODE_SHIFT 2
|
|
|
|
/*
|
|
* The bits in the status register. All bits are active when set to 1.
|
|
*
|
|
* R3000 status register fields:
|
|
* MIPS_SR_COP_USABILITY Control the usability of the four coprocessors.
|
|
* MIPS_SR_TS TLB shutdown.
|
|
*
|
|
* MIPS_SR_INT_IE Master (current) interrupt enable bit.
|
|
*
|
|
* Differences:
|
|
* r3k has cache control is via frobbing SR register bits, whereas the
|
|
* r4k cache control is via explicit instructions.
|
|
* r3k has a 3-entry stack of kernel/user bits, whereas the
|
|
* r4k has kernel/supervisor/user.
|
|
*/
|
|
#define MIPS_SR_COP_USABILITY 0xf0000000
|
|
#define MIPS_SR_COP_0_BIT 0x10000000
|
|
#define MIPS_SR_COP_1_BIT 0x20000000
|
|
#define MIPS_SR_COP_2_BIT 0x40000000
|
|
|
|
/* r4k and r3k differences, see below */
|
|
|
|
#define MIPS_SR_MX 0x01000000 /* MIPS64 */
|
|
#define MIPS_SR_PX 0x00800000 /* MIPS64 */
|
|
#define MIPS_SR_BEV 0x00400000 /* Use boot exception vector */
|
|
#define MIPS_SR_TS 0x00200000
|
|
|
|
/* r4k and r3k differences, see below */
|
|
|
|
#define MIPS_SR_INT_IE 0x00000001
|
|
/*#define MIPS_SR_MBZ 0x0f8000c0*/ /* Never used, true for r3k */
|
|
/*#define MIPS_SR_INT_MASK 0x0000ff00*/
|
|
|
|
|
|
/*
|
|
* The R2000/R3000-specific status register bit definitions.
|
|
* all bits are active when set to 1.
|
|
*
|
|
* MIPS_SR_PARITY_ERR Parity error.
|
|
* MIPS_SR_CACHE_MISS Most recent D-cache load resulted in a miss.
|
|
* MIPS_SR_PARITY_ZERO Zero replaces outgoing parity bits.
|
|
* MIPS_SR_SWAP_CACHES Swap I-cache and D-cache.
|
|
* MIPS_SR_ISOL_CACHES Isolate D-cache from main memory.
|
|
* Interrupt enable bits defined below.
|
|
* MIPS_SR_KU_OLD Old kernel/user mode bit. 1 => user mode.
|
|
* MIPS_SR_INT_ENA_OLD Old interrupt enable bit.
|
|
* MIPS_SR_KU_PREV Previous kernel/user mode bit. 1 => user mode.
|
|
* MIPS_SR_INT_ENA_PREV Previous interrupt enable bit.
|
|
* MIPS_SR_KU_CUR Current kernel/user mode bit. 1 => user mode.
|
|
*/
|
|
|
|
#define MIPS1_PARITY_ERR 0x00100000
|
|
#define MIPS1_CACHE_MISS 0x00080000
|
|
#define MIPS1_PARITY_ZERO 0x00040000
|
|
#define MIPS1_SWAP_CACHES 0x00020000
|
|
#define MIPS1_ISOL_CACHES 0x00010000
|
|
|
|
#define MIPS1_SR_KU_OLD 0x00000020 /* 2nd stacked KU/IE*/
|
|
#define MIPS1_SR_INT_ENA_OLD 0x00000010 /* 2nd stacked KU/IE*/
|
|
#define MIPS1_SR_KU_PREV 0x00000008 /* 1st stacked KU/IE*/
|
|
#define MIPS1_SR_INT_ENA_PREV 0x00000004 /* 1st stacked KU/IE*/
|
|
#define MIPS1_SR_KU_CUR 0x00000002 /* current KU */
|
|
|
|
/* backwards compatibility */
|
|
#define MIPS_SR_PARITY_ERR MIPS1_PARITY_ERR
|
|
#define MIPS_SR_CACHE_MISS MIPS1_CACHE_MISS
|
|
#define MIPS_SR_PARITY_ZERO MIPS1_PARITY_ZERO
|
|
#define MIPS_SR_SWAP_CACHES MIPS1_SWAP_CACHES
|
|
#define MIPS_SR_ISOL_CACHES MIPS1_ISOL_CACHES
|
|
|
|
#define MIPS_SR_KU_OLD MIPS1_SR_KU_OLD
|
|
#define MIPS_SR_INT_ENA_OLD MIPS1_SR_INT_ENA_OLD
|
|
#define MIPS_SR_KU_PREV MIPS1_SR_KU_PREV
|
|
#define MIPS_SR_KU_CUR MIPS1_SR_KU_CUR
|
|
#define MIPS_SR_INT_ENA_PREV MIPS1_SR_INT_ENA_PREV
|
|
|
|
/*
|
|
* R4000 status register bit definitons,
|
|
* where different from r2000/r3000.
|
|
*/
|
|
#define MIPS3_SR_XX 0x80000000
|
|
#define MIPS3_SR_RP 0x08000000
|
|
#define MIPS3_SR_FR 0x04000000
|
|
#define MIPS3_SR_RE 0x02000000
|
|
|
|
#define MIPS3_SR_DIAG_DL 0x01000000 /* QED 52xx */
|
|
#define MIPS3_SR_DIAG_IL 0x00800000 /* QED 52xx */
|
|
#define MIPS3_SR_PX 0x00800000 /* MIPS64 */
|
|
#define MIPS3_SR_SR 0x00100000
|
|
#define MIPS3_SR_NMI 0x00080000 /* MIPS32/64 */
|
|
#define MIPS3_SR_DIAG_CH 0x00040000
|
|
#define MIPS3_SR_DIAG_CE 0x00020000
|
|
#define MIPS3_SR_DIAG_PE 0x00010000
|
|
#define MIPS3_SR_KX 0x00000080
|
|
#define MIPS3_SR_SX 0x00000040
|
|
#define MIPS3_SR_UX 0x00000020
|
|
#define MIPS3_SR_KSU_MASK 0x00000018
|
|
#define MIPS3_SR_KSU_USER 0x00000010
|
|
#define MIPS3_SR_KSU_SUPER 0x00000008
|
|
#define MIPS3_SR_KSU_KERNEL 0x00000000
|
|
#define MIPS3_SR_ERL 0x00000004
|
|
#define MIPS3_SR_EXL 0x00000002
|
|
|
|
#define MIPS_SR_SOFT_RESET MIPS3_SR_SOFT_RESET
|
|
#define MIPS_SR_DIAG_CH MIPS3_SR_DIAG_CH
|
|
#define MIPS_SR_DIAG_CE MIPS3_SR_DIAG_CE
|
|
#define MIPS_SR_DIAG_PE MIPS3_SR_DIAG_PE
|
|
#define MIPS_SR_KX MIPS3_SR_KX
|
|
#define MIPS_SR_SX MIPS3_SR_SX
|
|
#define MIPS_SR_UX MIPS3_SR_UX
|
|
|
|
#define MIPS_SR_KSU_MASK MIPS3_SR_KSU_MASK
|
|
#define MIPS_SR_KSU_USER MIPS3_SR_KSU_USER
|
|
#define MIPS_SR_KSU_SUPER MIPS3_SR_KSU_SUPER
|
|
#define MIPS_SR_KSU_KERNEL MIPS3_SR_KSU_KERNEL
|
|
#define MIPS_SR_ERL MIPS3_SR_ERL
|
|
#define MIPS_SR_EXL MIPS3_SR_EXL
|
|
|
|
|
|
/*
|
|
* The interrupt masks.
|
|
* If a bit in the mask is 1 then the interrupt is enabled (or pending).
|
|
*/
|
|
#define MIPS_INT_MASK 0xff00
|
|
#define MIPS_INT_MASK_5 0x8000
|
|
#define MIPS_INT_MASK_4 0x4000
|
|
#define MIPS_INT_MASK_3 0x2000
|
|
#define MIPS_INT_MASK_2 0x1000
|
|
#define MIPS_INT_MASK_1 0x0800
|
|
#define MIPS_INT_MASK_0 0x0400
|
|
#define MIPS_HARD_INT_MASK 0xfc00
|
|
#define MIPS_SOFT_INT_MASK_1 0x0200
|
|
#define MIPS_SOFT_INT_MASK_0 0x0100
|
|
#define MIPS_SOFT_INT_MASK 0x0300
|
|
#define MIPS_INT_MASK_SHIFT 8
|
|
|
|
/*
|
|
* mips3 CPUs have on-chip timer at INT_MASK_5. Each platform can
|
|
* choose to enable this interrupt.
|
|
*/
|
|
#if defined(MIPS3_ENABLE_CLOCK_INTR)
|
|
#define MIPS3_INT_MASK MIPS_INT_MASK
|
|
#define MIPS3_HARD_INT_MASK MIPS_HARD_INT_MASK
|
|
#else
|
|
#define MIPS3_INT_MASK (MIPS_INT_MASK & ~MIPS_INT_MASK_5)
|
|
#define MIPS3_HARD_INT_MASK (MIPS_HARD_INT_MASK & ~MIPS_INT_MASK_5)
|
|
#endif
|
|
|
|
/*
|
|
* The bits in the context register.
|
|
*/
|
|
#define MIPS1_CNTXT_PTE_BASE 0xFFE00000
|
|
#define MIPS1_CNTXT_BAD_VPN 0x001FFFFC
|
|
|
|
#define MIPS3_CNTXT_PTE_BASE 0xFF800000
|
|
#define MIPS3_CNTXT_BAD_VPN2 0x007FFFF0
|
|
|
|
/*
|
|
* The bits in the MIPS3 config register.
|
|
*
|
|
* bit 0..5: R/W, Bit 6..31: R/O
|
|
*/
|
|
|
|
/* kseg0 coherency algorithm - see MIPS3_TLB_ATTR values */
|
|
#define MIPS3_CONFIG_K0_MASK 0x00000007
|
|
|
|
/*
|
|
* R/W Update on Store Conditional
|
|
* 0: Store Conditional uses coherency algorithm specified by TLB
|
|
* 1: Store Conditional uses cacheable coherent update on write
|
|
*/
|
|
#define MIPS3_CONFIG_CU 0x00000008
|
|
|
|
#define MIPS3_CONFIG_DB 0x00000010 /* Primary D-cache line size */
|
|
#define MIPS3_CONFIG_IB 0x00000020 /* Primary I-cache line size */
|
|
#define MIPS3_CONFIG_CACHE_L1_LSIZE(config, bit) \
|
|
(((config) & (bit)) ? 32 : 16)
|
|
|
|
#define MIPS3_CONFIG_DC_MASK 0x000001c0 /* Primary D-cache size */
|
|
#define MIPS3_CONFIG_DC_SHIFT 6
|
|
#define MIPS3_CONFIG_IC_MASK 0x00000e00 /* Primary I-cache size */
|
|
#define MIPS3_CONFIG_IC_SHIFT 9
|
|
#define MIPS3_CONFIG_C_DEFBASE 0x1000 /* default base 2^12 */
|
|
|
|
/* Cache size mode indication: available only on Vr41xx CPUs */
|
|
#define MIPS3_CONFIG_CS 0x00001000
|
|
#define MIPS3_CONFIG_C_4100BASE 0x0400 /* base is 2^10 if CS=1 */
|
|
#define MIPS3_CONFIG_CACHE_SIZE(config, mask, base, shift) \
|
|
((base) << (((config) & (mask)) >> (shift)))
|
|
|
|
/* External cache enable: Controls L2 for R5000/Rm527x and L3 for Rm7000 */
|
|
#define MIPS3_CONFIG_SE 0x00001000
|
|
|
|
/* Block ordering: 0: sequential, 1: sub-block */
|
|
#define MIPS3_CONFIG_EB 0x00002000
|
|
|
|
/* ECC mode - 0: ECC mode, 1: parity mode */
|
|
#define MIPS3_CONFIG_EM 0x00004000
|
|
|
|
/* BigEndianMem - 0: kernel and memory are little endian, 1: big endian */
|
|
#define MIPS3_CONFIG_BE 0x00008000
|
|
|
|
/* Dirty Shared coherency state - 0: enabled, 1: disabled */
|
|
#define MIPS3_CONFIG_SM 0x00010000
|
|
|
|
/* Secondary Cache - 0: present, 1: not present */
|
|
#define MIPS3_CONFIG_SC 0x00020000
|
|
|
|
/* System Port width - 0: 64-bit, 1: 32-bit (QED RM523x), 2,3: reserved */
|
|
#define MIPS3_CONFIG_EW_MASK 0x000c0000
|
|
#define MIPS3_CONFIG_EW_SHIFT 18
|
|
|
|
/* Secondary Cache port width - 0: 128-bit data path to S-cache, 1: reserved */
|
|
#define MIPS3_CONFIG_SW 0x00100000
|
|
|
|
/* Split Secondary Cache Mode - 0: I/D mixed, 1: I/D separated by SCAddr(17) */
|
|
#define MIPS3_CONFIG_SS 0x00200000
|
|
|
|
/* Secondary Cache line size */
|
|
#define MIPS3_CONFIG_SB_MASK 0x00c00000
|
|
#define MIPS3_CONFIG_SB_SHIFT 22
|
|
#define MIPS3_CONFIG_CACHE_L2_LSIZE(config) \
|
|
(0x10 << (((config) & MIPS3_CONFIG_SB_MASK) >> MIPS3_CONFIG_SB_SHIFT))
|
|
|
|
/* Write back data rate */
|
|
#define MIPS3_CONFIG_EP_MASK 0x0f000000
|
|
#define MIPS3_CONFIG_EP_SHIFT 24
|
|
|
|
/* System clock ratio - this value is CPU dependent */
|
|
#define MIPS3_CONFIG_EC_MASK 0x70000000
|
|
#define MIPS3_CONFIG_EC_SHIFT 28
|
|
|
|
/* Master-Checker Mode - 1: enabled */
|
|
#define MIPS3_CONFIG_CM 0x80000000
|
|
|
|
/*
|
|
* The bits in the MIPS4 config register.
|
|
*/
|
|
|
|
/* kseg0 coherency algorithm - see MIPS3_TLB_ATTR values */
|
|
#define MIPS4_CONFIG_K0_MASK MIPS3_CONFIG_K0_MASK
|
|
#define MIPS4_CONFIG_DN_MASK 0x00000018 /* Device number */
|
|
#define MIPS4_CONFIG_CT 0x00000020 /* CohPrcReqTar */
|
|
#define MIPS4_CONFIG_PE 0x00000040 /* PreElmReq */
|
|
#define MIPS4_CONFIG_PM_MASK 0x00000180 /* PreReqMax */
|
|
#define MIPS4_CONFIG_EC_MASK 0x00001e00 /* SysClkDiv */
|
|
#define MIPS4_CONFIG_SB 0x00002000 /* SCBlkSize */
|
|
#define MIPS4_CONFIG_SK 0x00004000 /* SCColEn */
|
|
#define MIPS4_CONFIG_BE 0x00008000 /* MemEnd */
|
|
#define MIPS4_CONFIG_SS_MASK 0x00070000 /* SCSize */
|
|
#define MIPS4_CONFIG_SC_MASK 0x00380000 /* SCClkDiv */
|
|
#define MIPS4_CONFIG_RESERVED 0x03c00000 /* Reserved wired 0 */
|
|
#define MIPS4_CONFIG_DC_MASK 0x1c000000 /* Primary D-Cache size */
|
|
#define MIPS4_CONFIG_IC_MASK 0xe0000000 /* Primary I-Cache size */
|
|
|
|
#define MIPS4_CONFIG_DC_SHIFT 26
|
|
#define MIPS4_CONFIG_IC_SHIFT 29
|
|
|
|
#define MIPS4_CONFIG_CACHE_SIZE(config, mask, base, shift) \
|
|
((base) << (((config) & (mask)) >> (shift)))
|
|
|
|
#define MIPS4_CONFIG_CACHE_L2_LSIZE(config) \
|
|
(((config) & MIPS4_CONFIG_SB) ? 128 : 64)
|
|
|
|
/*
|
|
* Location of exception vectors.
|
|
*
|
|
* Common vectors: reset and UTLB miss.
|
|
*/
|
|
#define MIPS_RESET_EXC_VEC MIPS_PHYS_TO_KSEG1(0x1FC00000)
|
|
#define MIPS_UTLB_MISS_EXC_VEC MIPS_PHYS_TO_KSEG0(0)
|
|
|
|
/*
|
|
* MIPS-1 general exception vector (everything else)
|
|
*/
|
|
#define MIPS1_GEN_EXC_VEC MIPS_PHYS_TO_KSEG0(0x0080)
|
|
|
|
/*
|
|
* MIPS-III exception vectors
|
|
*/
|
|
#define MIPS3_XTLB_MISS_EXC_VEC MIPS_PHYS_TO_KSEG0(0x0080)
|
|
#define MIPS3_CACHE_ERR_EXC_VEC MIPS_PHYS_TO_KSEG0(0x0100)
|
|
#define MIPS3_GEN_EXC_VEC MIPS_PHYS_TO_KSEG0(0x0180)
|
|
|
|
/*
|
|
* MIPS32/MIPS64 (and some MIPS3) dedicated interrupt vector.
|
|
*/
|
|
#define MIPS3_INTR_EXC_VEC MIPS_PHYS_TO_KSEG0(0x0200)
|
|
|
|
/*
|
|
* Coprocessor 0 registers:
|
|
*
|
|
* v--- width for mips I,III,32,64
|
|
* (3=32bit, 6=64bit, i=impl dep)
|
|
* 0 MIPS_COP_0_TLB_INDEX 3333 TLB Index.
|
|
* 1 MIPS_COP_0_TLB_RANDOM 3333 TLB Random.
|
|
* 2 MIPS_COP_0_TLB_LOW 3... r3k TLB entry low.
|
|
* 2 MIPS_COP_0_TLB_LO0 .636 r4k TLB entry low.
|
|
* 3 MIPS_COP_0_TLB_LO1 .636 r4k TLB entry low, extended.
|
|
* 4 MIPS_COP_0_TLB_CONTEXT 3636 TLB Context.
|
|
* 4/2 MIPS_COP_0_USERLOCAL ..36 UserLocal.
|
|
* 5 MIPS_COP_0_TLB_PG_MASK .333 TLB Page Mask register.
|
|
* 6 MIPS_COP_0_TLB_WIRED .333 Wired TLB number.
|
|
* 7 MIPS_COP_0_HWRENA ..33 rdHWR Enable.
|
|
* 8 MIPS_COP_0_BAD_VADDR 3636 Bad virtual address.
|
|
* 9 MIPS_COP_0_COUNT .333 Count register.
|
|
* 10 MIPS_COP_0_TLB_HI 3636 TLB entry high.
|
|
* 11 MIPS_COP_0_COMPARE .333 Compare (against Count).
|
|
* 12 MIPS_COP_0_STATUS 3333 Status register.
|
|
* 12/1 MIPS_COP_0_INTCTL ..33 Interrupt Control.
|
|
* 12/2 MIPS_COP_0_SRSCTL ..33 Shadow Register Set Selectors.
|
|
* 12/3 MIPS_COP_0_SRSMAP ..33 Shadow Set Map.
|
|
* 13 MIPS_COP_0_CAUSE 3333 Exception cause register.
|
|
* 14 MIPS_COP_0_EXC_PC 3636 Exception PC.
|
|
* 15 MIPS_COP_0_PRID 3333 Processor revision identifier.
|
|
* 15/1 MIPS_COP_0_EBASE ..33 Exception Base.
|
|
* 16 MIPS_COP_0_CONFIG 3333 Configuration register.
|
|
* 16/1 MIPS_COP_0_CONFIG1 ..33 Configuration register 1.
|
|
* 16/2 MIPS_COP_0_CONFIG2 ..33 Configuration register 2.
|
|
* 16/3 MIPS_COP_0_CONFIG3 ..33 Configuration register 3.
|
|
* 16/6 MIPS_COP_0_CONFIG6 ..33 Configuration register 6.
|
|
* 16/7 MIPS_COP_0_CONFIG7 ..33 Configuration register 7.
|
|
* 17 MIPS_COP_0_LLADDR .336 Load Linked Address.
|
|
* 18 MIPS_COP_0_WATCH_LO .336 WatchLo register.
|
|
* 19 MIPS_COP_0_WATCH_HI .333 WatchHi register.
|
|
* 20 MIPS_COP_0_TLB_XCONTEXT .6.6 TLB XContext register.
|
|
* 22 MIPS_COP_0_OSSCRATCH ...6 [RMI] OS Scratch register. (select 0..7)
|
|
* 22 MIPS_COP_0_DIAG ...6 [LOONGSON2] Diagnostic register.
|
|
* 23 MIPS_COP_0_DEBUG .... Debug JTAG register.
|
|
* 24 MIPS_COP_0_DEPC .... DEPC JTAG register.
|
|
* 25 MIPS_COP_0_PERFCNT ..36 Performance Counter register.
|
|
* 26 MIPS_COP_0_ECC .3ii ECC / Error Control register.
|
|
* 27 MIPS_COP_0_CACHE_ERR .3ii Cache Error register.
|
|
* 28/0 MIPS_COP_0_TAG_LO .3ii Cache TagLo register (instr).
|
|
* 28/1 MIPS_COP_0_DATA_LO ..ii Cache DataLo register (instr).
|
|
* 28/2 MIPS_COP_0_TAG_LO ..ii Cache TagLo register (data).
|
|
* 28/3 MIPS_COP_0_DATA_LO ..ii Cache DataLo register (data).
|
|
* 29/0 MIPS_COP_0_TAG_HI .3ii Cache TagHi register (instr).
|
|
* 29/1 MIPS_COP_0_DATA_HI ..ii Cache DataHi register (instr).
|
|
* 29/2 MIPS_COP_0_TAG_HI ..ii Cache TagHi register (data).
|
|
* 29/3 MIPS_COP_0_DATA_HI ..ii Cache DataHi register (data).
|
|
* 30 MIPS_COP_0_ERROR_PC .636 Error EPC register.
|
|
* 31 MIPS_COP_0_DESAVE .... DESAVE JTAG register.
|
|
*/
|
|
#ifdef _LOCORE
|
|
#define _(n) __CONCAT($,n)
|
|
#else
|
|
#define _(n) n
|
|
#endif
|
|
#define MIPS_COP_0_TLB_INDEX _(0)
|
|
#define MIPS_COP_0_TLB_RANDOM _(1)
|
|
/* Name and meaning of TLB bits for $2 differ on r3k and r4k. */
|
|
|
|
#define MIPS_COP_0_TLB_CONTEXT _(4)
|
|
/* $5 and $6 new with MIPS-III */
|
|
#define MIPS_COP_0_BAD_VADDR _(8)
|
|
#define MIPS_COP_0_TLB_HI _(10)
|
|
#define MIPS_COP_0_STATUS _(12)
|
|
#define MIPS_COP_0_CAUSE _(13)
|
|
#define MIPS_COP_0_EXC_PC _(14)
|
|
#define MIPS_COP_0_PRID _(15)
|
|
|
|
|
|
/* MIPS-I */
|
|
#define MIPS_COP_0_TLB_LOW _(2)
|
|
|
|
/* MIPS-III */
|
|
#define MIPS_COP_0_TLB_LO0 _(2)
|
|
#define MIPS_COP_0_TLB_LO1 _(3)
|
|
|
|
#define MIPS_COP_0_TLB_PG_MASK _(5)
|
|
#define MIPS_COP_0_TLB_WIRED _(6)
|
|
|
|
#define MIPS_COP_0_COUNT _(9)
|
|
#define MIPS_COP_0_COMPARE _(11)
|
|
|
|
#define MIPS_COP_0_CONFIG _(16)
|
|
#define MIPS_COP_0_LLADDR _(17)
|
|
#define MIPS_COP_0_WATCH_LO _(18)
|
|
#define MIPS_COP_0_WATCH_HI _(19)
|
|
#define MIPS_COP_0_TLB_XCONTEXT _(20)
|
|
#define MIPS_COP_0_ECC _(26)
|
|
#define MIPS_COP_0_CACHE_ERR _(27)
|
|
#define MIPS_COP_0_TAG_LO _(28)
|
|
#define MIPS_COP_0_TAG_HI _(29)
|
|
#define MIPS_COP_0_ERROR_PC _(30)
|
|
|
|
/* MIPS32/64 */
|
|
#define MIPS_COP_0_HWRENA _(7)
|
|
#define MIPS_COP_0_OSSCRATCH _(22)
|
|
#define MIPS_COP_0_DIAG _(22)
|
|
#define MIPS_COP_0_DEBUG _(23)
|
|
#define MIPS_COP_0_DEPC _(24)
|
|
#define MIPS_COP_0_PERFCNT _(25)
|
|
#define MIPS_COP_0_DATA_LO _(28)
|
|
#define MIPS_COP_0_DATA_HI _(29)
|
|
#define MIPS_COP_0_DESAVE _(31)
|
|
|
|
#define MIPS_DIAG_RAS_DISABLE 0x00000001 /* Loongson2 */
|
|
#define MIPS_DIAG_BTB_CLEAR 0x00000002 /* Loongson2 */
|
|
#define MIPS_DIAG_ITLB_CLEAR 0x00000004 /* Loongson2 */
|
|
|
|
/*
|
|
* Values for the code field in a break instruction.
|
|
*/
|
|
#define MIPS_BREAK_INSTR 0x0000000d
|
|
#define MIPS_BREAK_VAL_MASK 0x03ff0000
|
|
#define MIPS_BREAK_VAL_SHIFT 16
|
|
#define MIPS_BREAK_KDB_VAL 512
|
|
#define MIPS_BREAK_SSTEP_VAL 513
|
|
#define MIPS_BREAK_BRKPT_VAL 514
|
|
#define MIPS_BREAK_SOVER_VAL 515
|
|
#define MIPS_BREAK_KDB (MIPS_BREAK_INSTR | \
|
|
(MIPS_BREAK_KDB_VAL << MIPS_BREAK_VAL_SHIFT))
|
|
#define MIPS_BREAK_SSTEP (MIPS_BREAK_INSTR | \
|
|
(MIPS_BREAK_SSTEP_VAL << MIPS_BREAK_VAL_SHIFT))
|
|
#define MIPS_BREAK_BRKPT (MIPS_BREAK_INSTR | \
|
|
(MIPS_BREAK_BRKPT_VAL << MIPS_BREAK_VAL_SHIFT))
|
|
#define MIPS_BREAK_SOVER (MIPS_BREAK_INSTR | \
|
|
(MIPS_BREAK_SOVER_VAL << MIPS_BREAK_VAL_SHIFT))
|
|
|
|
/*
|
|
* Mininum and maximum cache sizes.
|
|
*/
|
|
#define MIPS_MIN_CACHE_SIZE (16 * 1024)
|
|
#define MIPS_MAX_CACHE_SIZE (256 * 1024)
|
|
#define MIPS3_MAX_PCACHE_SIZE (32 * 1024) /* max. primary cache size */
|
|
|
|
/*
|
|
* The floating point version and status registers.
|
|
*/
|
|
#define MIPS_FPU_ID $0
|
|
#define MIPS_FPU_CSR $31
|
|
|
|
/*
|
|
* The floating point coprocessor status register bits.
|
|
*/
|
|
#define MIPS_FPU_ROUNDING_BITS 0x00000003
|
|
#define MIPS_FPU_ROUND_RN 0x00000000
|
|
#define MIPS_FPU_ROUND_RZ 0x00000001
|
|
#define MIPS_FPU_ROUND_RP 0x00000002
|
|
#define MIPS_FPU_ROUND_RM 0x00000003
|
|
#define MIPS_FPU_STICKY_BITS 0x0000007c
|
|
#define MIPS_FPU_STICKY_INEXACT 0x00000004
|
|
#define MIPS_FPU_STICKY_UNDERFLOW 0x00000008
|
|
#define MIPS_FPU_STICKY_OVERFLOW 0x00000010
|
|
#define MIPS_FPU_STICKY_DIV0 0x00000020
|
|
#define MIPS_FPU_STICKY_INVALID 0x00000040
|
|
#define MIPS_FPU_ENABLE_BITS 0x00000f80
|
|
#define MIPS_FPU_ENABLE_INEXACT 0x00000080
|
|
#define MIPS_FPU_ENABLE_UNDERFLOW 0x00000100
|
|
#define MIPS_FPU_ENABLE_OVERFLOW 0x00000200
|
|
#define MIPS_FPU_ENABLE_DIV0 0x00000400
|
|
#define MIPS_FPU_ENABLE_INVALID 0x00000800
|
|
#define MIPS_FPU_EXCEPTION_BITS 0x0003f000
|
|
#define MIPS_FPU_EXCEPTION_INEXACT 0x00001000
|
|
#define MIPS_FPU_EXCEPTION_UNDERFLOW 0x00002000
|
|
#define MIPS_FPU_EXCEPTION_OVERFLOW 0x00004000
|
|
#define MIPS_FPU_EXCEPTION_DIV0 0x00008000
|
|
#define MIPS_FPU_EXCEPTION_INVALID 0x00010000
|
|
#define MIPS_FPU_EXCEPTION_UNIMPL 0x00020000
|
|
#define MIPS_FPU_COND_BIT 0x00800000
|
|
#define MIPS_FPU_FLUSH_BIT 0x01000000 /* r4k, MBZ on r3k */
|
|
#define MIPS1_FPC_MBZ_BITS 0xff7c0000
|
|
#define MIPS3_FPC_MBZ_BITS 0xfe7c0000
|
|
|
|
|
|
/*
|
|
* Constants to determine if have a floating point instruction.
|
|
*/
|
|
#define MIPS_OPCODE_SHIFT 26
|
|
#define MIPS_OPCODE_C1 0x11
|
|
|
|
|
|
/*
|
|
* The low part of the TLB entry.
|
|
*/
|
|
#define MIPS1_TLB_PFN 0xfffff000
|
|
#define MIPS1_TLB_NON_CACHEABLE_BIT 0x00000800
|
|
#define MIPS1_TLB_DIRTY_BIT 0x00000400
|
|
#define MIPS1_TLB_VALID_BIT 0x00000200
|
|
#define MIPS1_TLB_GLOBAL_BIT 0x00000100
|
|
|
|
#define MIPS3_TLB_PFN 0x3fffffc0
|
|
#define MIPS3_TLB_ATTR_MASK 0x00000038
|
|
#define MIPS3_TLB_ATTR_SHIFT 3
|
|
#define MIPS3_TLB_DIRTY_BIT 0x00000004
|
|
#define MIPS3_TLB_VALID_BIT 0x00000002
|
|
#define MIPS3_TLB_GLOBAL_BIT 0x00000001
|
|
|
|
#define MIPS1_TLB_PHYS_PAGE_SHIFT 12
|
|
#define MIPS3_TLB_PHYS_PAGE_SHIFT 6
|
|
#define MIPS1_TLB_PF_NUM MIPS1_TLB_PFN
|
|
#define MIPS3_TLB_PF_NUM MIPS3_TLB_PFN
|
|
#define MIPS1_TLB_MOD_BIT MIPS1_TLB_DIRTY_BIT
|
|
#define MIPS3_TLB_MOD_BIT MIPS3_TLB_DIRTY_BIT
|
|
|
|
/*
|
|
* MIPS3_TLB_ATTR (CCA) values - coherency algorithm:
|
|
* 0: cacheable, noncoherent, write-through, no write allocate
|
|
* 1: cacheable, noncoherent, write-through, write allocate
|
|
* 2: uncached
|
|
* 3: cacheable, noncoherent, write-back (noncoherent)
|
|
* 4: cacheable, coherent, write-back, exclusive (exclusive)
|
|
* 5: cacheable, coherent, write-back, exclusive on write (sharable)
|
|
* 6: cacheable, coherent, write-back, update on write (update)
|
|
* 7: uncached, accelerated (gather STORE operations)
|
|
*/
|
|
#define MIPS3_TLB_ATTR_WT 0 /* IDT */
|
|
#define MIPS3_TLB_ATTR_WT_WRITEALLOCATE 1 /* IDT */
|
|
#define MIPS3_TLB_ATTR_UNCACHED 2 /* R4000/R4400, IDT */
|
|
#define MIPS3_TLB_ATTR_WB_NONCOHERENT 3 /* R4000/R4400, IDT */
|
|
#define MIPS3_TLB_ATTR_WB_EXCLUSIVE 4 /* R4000/R4400 */
|
|
#define MIPS3_TLB_ATTR_WB_SHARABLE 5 /* R4000/R4400 */
|
|
#define MIPS3_TLB_ATTR_WB_UPDATE 6 /* R4000/R4400 */
|
|
#define MIPS4_TLB_ATTR_UNCACHED_ACCELERATED 7 /* R10000 */
|
|
|
|
|
|
/*
|
|
* The high part of the TLB entry.
|
|
*/
|
|
#define MIPS1_TLB_VPN 0xfffff000
|
|
#define MIPS1_TLB_PID 0x00000fc0
|
|
#define MIPS1_TLB_PID_SHIFT 6
|
|
|
|
#define MIPS3_TLB_VPN2 0xffffe000
|
|
#define MIPS3_TLB_ASID 0x000000ff
|
|
|
|
#define MIPS1_TLB_VIRT_PAGE_NUM MIPS1_TLB_VPN
|
|
#define MIPS3_TLB_VIRT_PAGE_NUM MIPS3_TLB_VPN2
|
|
#define MIPS3_TLB_PID MIPS3_TLB_ASID
|
|
#define MIPS_TLB_VIRT_PAGE_SHIFT 12
|
|
|
|
/*
|
|
* r3000: shift count to put the index in the right spot.
|
|
*/
|
|
#define MIPS1_TLB_INDEX_SHIFT 8
|
|
|
|
/*
|
|
* The first TLB that write random hits.
|
|
*/
|
|
#define MIPS1_TLB_FIRST_RAND_ENTRY 8
|
|
#define MIPS3_TLB_WIRED_UPAGES 1
|
|
|
|
/*
|
|
* The number of process id entries.
|
|
*/
|
|
#define MIPS1_TLB_NUM_PIDS 64
|
|
#define MIPS3_TLB_NUM_ASIDS 256
|
|
|
|
/*
|
|
* Patch codes to hide CPU design differences between MIPS1 and MIPS3.
|
|
*/
|
|
|
|
/* XXX simonb: this is before MIPS3_PLUS is defined (and is ugly!) */
|
|
|
|
#if (MIPS3 + MIPS4 + MIPS32 + MIPS32R2 + MIPS64 + MIPS64R2) == 0 && MIPS1 != 0
|
|
#define MIPS_TLB_PID_SHIFT MIPS1_TLB_PID_SHIFT
|
|
#define MIPS_TLB_PID MIPS1_TLB_PID
|
|
#define MIPS_TLB_NUM_PIDS MIPS1_TLB_NUM_PIDS
|
|
#endif
|
|
|
|
#if (MIPS3 + MIPS4 + MIPS32 + MIPS32R2 + MIPS64 + MIPS64R2) != 0 && MIPS1 == 0
|
|
#define MIPS_TLB_PID_SHIFT 0
|
|
#define MIPS_TLB_PID MIPS3_TLB_PID
|
|
#define MIPS_TLB_NUM_PIDS MIPS3_TLB_NUM_ASIDS
|
|
#endif
|
|
|
|
|
|
#if !defined(MIPS_TLB_PID_SHIFT)
|
|
#define MIPS_TLB_PID_SHIFT \
|
|
((MIPS_HAS_R4K_MMU) ? 0 : MIPS1_TLB_PID_SHIFT)
|
|
|
|
#define MIPS_TLB_PID \
|
|
((MIPS_HAS_R4K_MMU) ? MIPS3_TLB_PID : MIPS1_TLB_PID)
|
|
|
|
#define MIPS_TLB_NUM_PIDS \
|
|
((MIPS_HAS_R4K_MMU) ? MIPS3_TLB_NUM_ASIDS : MIPS1_TLB_NUM_PIDS)
|
|
#endif
|
|
|
|
/*
|
|
* Bits defined for for the HWREna (CP0 register 7, select 0).
|
|
*/
|
|
#define MIPS_HWRENA_IMPL31 __BIT(31)
|
|
#define MIPS_HWRENA_IMPL30 __BIT(30)
|
|
#define MIPS_HWRENA_UL __BIT(29) /* Userlocal */
|
|
#define MIPS_HWRENA_CCRES __BIT(3)
|
|
#define MIPS_HWRENA_CC __BIT(2)
|
|
#define MIPS_HWRENA_SYNCI_STEP __BIT(1)
|
|
#define MIPS_HWRENA_CPUNUM __BIT(0)
|
|
|
|
/*
|
|
* Hints for the prefetch instruction
|
|
*/
|
|
|
|
/*
|
|
* Prefetched data is expected to be read (not modified)
|
|
*/
|
|
#define PREF_LOAD 0
|
|
#define PREF_LOAD_STREAMED 4 /* but not reused extensively; it */
|
|
/* "streams" through cache. */
|
|
#define PREF_LOAD_RETAINED 6 /* and reused extensively; it should */
|
|
/* be "retained" in the cache. */
|
|
|
|
/*
|
|
* Prefetched data is expected to be stored or modified
|
|
*/
|
|
#define PREF_STORE 1
|
|
#define PREF_STORE_STREAMED 5 /* but not reused extensively; it */
|
|
/* "streams" through cache. */
|
|
#define PREF_STORE_RETAINED 7 /* and reused extensively; it should */
|
|
/* be "retained" in the cache. */
|
|
|
|
/*
|
|
* data is no longer expected to be used. For a WB cache, schedule a
|
|
* writeback of any dirty data and afterwards free the cache lines.
|
|
*/
|
|
#define PREF_WB_INV 25
|
|
#define PREF_NUDGE PREF_WB_INV
|
|
|
|
/*
|
|
* Prepare for writing an entire cache line without the overhead
|
|
* involved in filling the line from memory.
|
|
*/
|
|
#define PREF_PREPAREFORSTORE 30
|
|
|
|
/*
|
|
* CPU processor revision IDs for company ID == 0 (non mips32/64 chips)
|
|
*/
|
|
#define MIPS_R2000 0x01 /* MIPS R2000 ISA I */
|
|
#define MIPS_R3000 0x02 /* MIPS R3000 ISA I */
|
|
#define MIPS_R6000 0x03 /* MIPS R6000 ISA II */
|
|
#define MIPS_R4000 0x04 /* MIPS R4000/R4400 ISA III */
|
|
#define MIPS_R3LSI 0x05 /* LSI Logic R3000 derivative ISA I */
|
|
#define MIPS_R6000A 0x06 /* MIPS R6000A ISA II */
|
|
#define MIPS_R3IDT 0x07 /* IDT R3041 or RC36100 ISA I */
|
|
#define MIPS_R10000 0x09 /* MIPS R10000 ISA IV */
|
|
#define MIPS_R4200 0x0a /* NEC VR4200 ISA III */
|
|
#define MIPS_R4300 0x0b /* NEC VR4300 ISA III */
|
|
#define MIPS_R4100 0x0c /* NEC VR4100 ISA III */
|
|
#define MIPS_R12000 0x0e /* MIPS R12000 ISA IV */
|
|
#define MIPS_R14000 0x0f /* MIPS R14000 ISA IV */
|
|
#define MIPS_R8000 0x10 /* MIPS R8000 Blackbird/TFP ISA IV */
|
|
#define MIPS_RC32300 0x18 /* IDT RC32334,332,355 ISA 32 */
|
|
#define MIPS_R4600 0x20 /* QED R4600 Orion ISA III */
|
|
#define MIPS_R4700 0x21 /* QED R4700 Orion ISA III */
|
|
#define MIPS_R3SONY 0x21 /* Sony R3000 based ISA I */
|
|
#define MIPS_R4650 0x22 /* QED R4650 ISA III */
|
|
#define MIPS_TX3900 0x22 /* Toshiba TX39 family ISA I */
|
|
#define MIPS_R5000 0x23 /* MIPS R5000 ISA IV */
|
|
#define MIPS_R3NKK 0x23 /* NKK R3000 based ISA I */
|
|
#define MIPS_RC32364 0x26 /* IDT RC32364 ISA 32 */
|
|
#define MIPS_RM7000 0x27 /* QED RM7000 ISA IV */
|
|
#define MIPS_RM5200 0x28 /* QED RM5200s ISA IV */
|
|
#define MIPS_TX4900 0x2d /* Toshiba TX49 family ISA III */
|
|
#define MIPS_R5900 0x2e /* Toshiba R5900 (EECore) ISA --- */
|
|
#define MIPS_RC64470 0x30 /* IDT RC64474/RC64475 ISA III */
|
|
#define MIPS_TX7900 0x38 /* Toshiba TX79 ISA III+*/
|
|
#define MIPS_R5400 0x54 /* NEC VR5400 ISA IV */
|
|
#define MIPS_R5500 0x55 /* NEC VR5500 ISA IV */
|
|
#define MIPS_LOONGSON2 0x63 /* ICT Loongson-2 ISA III */
|
|
|
|
/*
|
|
* CPU revision IDs for some prehistoric processors.
|
|
*/
|
|
|
|
/* For MIPS_R3000 */
|
|
#define MIPS_REV_R2000A 0x16 /* R2000A uses R3000 proc revision */
|
|
#define MIPS_REV_R3000 0x20
|
|
#define MIPS_REV_R3000A 0x30
|
|
|
|
/* For MIPS_TX3900 */
|
|
#define MIPS_REV_TX3912 0x10
|
|
#define MIPS_REV_TX3922 0x30
|
|
#define MIPS_REV_TX3927 0x40
|
|
|
|
/* For MIPS_R4000 */
|
|
#define MIPS_REV_R4000_A 0x00
|
|
#define MIPS_REV_R4000_B 0x22
|
|
#define MIPS_REV_R4000_C 0x30
|
|
#define MIPS_REV_R4400_A 0x40
|
|
#define MIPS_REV_R4400_B 0x50
|
|
#define MIPS_REV_R4400_C 0x60
|
|
|
|
/* For MIPS_TX4900 */
|
|
#define MIPS_REV_TX4927 0x22
|
|
|
|
/* For MIPS_LOONGSON2 */
|
|
#define MIPS_REV_LOONGSON2E 0x02
|
|
#define MIPS_REV_LOONGSON2F 0x03
|
|
|
|
/*
|
|
* CPU processor revision IDs for company ID == 1 (MIPS)
|
|
*/
|
|
#define MIPS_4Kc 0x80 /* MIPS 4Kc ISA 32 */
|
|
#define MIPS_5Kc 0x81 /* MIPS 5Kc ISA 64 */
|
|
#define MIPS_20Kc 0x82 /* MIPS 20Kc ISA 64 */
|
|
#define MIPS_4Kmp 0x83 /* MIPS 4Km/4Kp ISA 32 */
|
|
#define MIPS_4KEc 0x84 /* MIPS 4KEc ISA 32 */
|
|
#define MIPS_4KEmp 0x85 /* MIPS 4KEm/4KEp ISA 32 */
|
|
#define MIPS_4KSc 0x86 /* MIPS 4KSc ISA 32 */
|
|
#define MIPS_M4K 0x87 /* MIPS M4K ISA 32 Rel 2 */
|
|
#define MIPS_25Kf 0x88 /* MIPS 25Kf ISA 64 */
|
|
#define MIPS_5KE 0x89 /* MIPS 5KE ISA 64 Rel 2 */
|
|
#define MIPS_4KEc_R2 0x90 /* MIPS 4KEc_R2 ISA 32 Rel 2 */
|
|
#define MIPS_4KEmp_R2 0x91 /* MIPS 4KEm/4KEp_R2 ISA 32 Rel 2 */
|
|
#define MIPS_4KSd 0x92 /* MIPS 4KSd ISA 32 Rel 2 */
|
|
#define MIPS_24K 0x93 /* MIPS 24Kc/24Kf ISA 32 Rel 2 */
|
|
#define MIPS_34K 0x95 /* MIPS 34K ISA 32 R2 MT */
|
|
#define MIPS_24KE 0x96 /* MIPS 24KEc ISA 32 Rel 2 */
|
|
#define MIPS_74K 0x97 /* MIPS 74Kc/74Kf ISA 32 Rel 2 */
|
|
#define MIPS_1004K 0x99 /* MIPS 1004Kc/1004Kf ISA 32 Rel 2 */
|
|
|
|
/*
|
|
* CPU processor revision IDs for company ID == 2 (Broadcom)
|
|
*/
|
|
#define MIPS_BCM3302 0x90 /* MIPS 4KEc_R2-like? ISA 32 Rel 2 */
|
|
|
|
/*
|
|
* Alchemy (company ID 3) use the processor ID field to donote the CPU core
|
|
* revision and the company options field do donate the SOC chip type.
|
|
*/
|
|
/* CPU processor revision IDs */
|
|
#define MIPS_AU_REV1 0x01 /* Alchemy Au1000 (Rev 1) ISA 32 */
|
|
#define MIPS_AU_REV2 0x02 /* Alchemy Au1000 (Rev 2) ISA 32 */
|
|
/* CPU company options IDs */
|
|
#define MIPS_AU1000 0x00
|
|
#define MIPS_AU1500 0x01
|
|
#define MIPS_AU1100 0x02
|
|
#define MIPS_AU1550 0x03
|
|
|
|
/*
|
|
* CPU processor revision IDs for company ID == 4 (SiByte)
|
|
*/
|
|
#define MIPS_SB1 0x01 /* SiByte SB1 ISA 64 */
|
|
|
|
/*
|
|
* CPU processor revision IDs for company ID == 5 (SandCraft)
|
|
*/
|
|
#define MIPS_SR7100 0x04 /* SandCraft SR7100 ISA 64 */
|
|
|
|
/*
|
|
* CPU revision IDs for company ID == 12 (RMI)
|
|
* note: unlisted Rev values may indicate pre-production silicon
|
|
*/
|
|
#define MIPS_XLR_B2 0x04 /* RMI XLR Production Rev B2 */
|
|
#define MIPS_XLR_C4 0x91 /* RMI XLR Production Rev C4 */
|
|
|
|
/*
|
|
* CPU processor IDs for company ID == 12 (RMI)
|
|
*/
|
|
#define MIPS_XLR308B 0x06 /* RMI XLR308-B ISA 64 */
|
|
#define MIPS_XLR508B 0x07 /* RMI XLR508-B ISA 64 */
|
|
#define MIPS_XLR516B 0x08 /* RMI XLR516-B ISA 64 */
|
|
#define MIPS_XLR532B 0x09 /* RMI XLR532-B ISA 64 */
|
|
#define MIPS_XLR716B 0x0a /* RMI XLR716-B ISA 64 */
|
|
#define MIPS_XLR732B 0x0b /* RMI XLR732-B ISA 64 */
|
|
#define MIPS_XLR732C 0x00 /* RMI XLR732-C ISA 64 */
|
|
#define MIPS_XLR716C 0x02 /* RMI XLR716-C ISA 64 */
|
|
#define MIPS_XLR532C 0x08 /* RMI XLR532-C ISA 64 */
|
|
#define MIPS_XLR516C 0x0a /* RMI XLR516-C ISA 64 */
|
|
#define MIPS_XLR508C 0x0b /* RMI XLR508-C ISA 64 */
|
|
#define MIPS_XLR308C 0x0f /* RMI XLR308-C ISA 64 */
|
|
#define MIPS_XLS616 0x40 /* RMI XLS616 ISA 64 */
|
|
#define MIPS_XLS416 0x44 /* RMI XLS416 ISA 64 */
|
|
#define MIPS_XLS608 0x4A /* RMI XLS608 ISA 64 */
|
|
#define MIPS_XLS408 0x4E /* RMI XLS406 ISA 64 */
|
|
#define MIPS_XLS404 0x4F /* RMI XLS404 ISA 64 */
|
|
#define MIPS_XLS408LITE 0x88 /* RMI XLS408-Lite ISA 64 */
|
|
#define MIPS_XLS404LITE 0x8C /* RMI XLS404-Lite ISA 64 */
|
|
#define MIPS_XLS208 0x8E /* RMI XLS208 ISA 64 */
|
|
#define MIPS_XLS204 0x8F /* RMI XLS204 ISA 64 */
|
|
#define MIPS_XLS108 0xCE /* RMI XLS108 ISA 64 */
|
|
#define MIPS_XLS104 0xCF /* RMI XLS104 ISA 64 */
|
|
|
|
/*
|
|
* CPU processor revision IDs for company ID == 7 (Microsoft)
|
|
*/
|
|
#define MIPS_eMIPS 0x04 /* MSR's eMIPS */
|
|
|
|
/*
|
|
* FPU processor revision ID
|
|
*/
|
|
#define MIPS_SOFT 0x00 /* Software emulation ISA I */
|
|
#define MIPS_R2360 0x01 /* MIPS R2360 FPC ISA I */
|
|
#define MIPS_R2010 0x02 /* MIPS R2010 FPC ISA I */
|
|
#define MIPS_R3010 0x03 /* MIPS R3010 FPC ISA I */
|
|
#define MIPS_R6010 0x04 /* MIPS R6010 FPC ISA II */
|
|
#define MIPS_R4010 0x05 /* MIPS R4010 FPC ISA II */
|
|
#define MIPS_R31LSI 0x06 /* LSI Logic derivate ISA I */
|
|
#define MIPS_R3TOSH 0x22 /* Toshiba R3000 based FPU ISA I */
|
|
|
|
#ifdef ENABLE_MIPS_TX3900
|
|
#include <mips/r3900regs.h>
|
|
#endif
|
|
#ifdef MIPS64_SB1
|
|
#include <mips/sb1regs.h>
|
|
#endif
|
|
#if defined(MIPS64_XLP) || defined(MIPS64_XLR) || defined(MIPS64_XLS)
|
|
#include <mips/rmi/rmixlreg.h>
|
|
#endif
|
|
|
|
#ifdef MIPS3_LOONGSON2
|
|
/*
|
|
* Loongson 2E/2F specific defines
|
|
*/
|
|
|
|
/*
|
|
* Address Window registers physical addresses
|
|
*
|
|
* The Loongson 2F processor has an AXI crossbar with four possible bus
|
|
* masters, each one having four programmable address windows.
|
|
*
|
|
* Each window is defined with three 64-bit registers:
|
|
* - a base address register, defining the address in the master address
|
|
* space (base register).
|
|
* - an address mask register, defining which address bits are valid in this
|
|
* window. A given address matches a window if (addr & mask) == base.
|
|
* - the location of the window base in the target, as well at the target
|
|
* number itself (mmap register). The lower 20 bits of the address are
|
|
* forced as zeroes regardless of their value in this register.
|
|
* The translated address is thus (addr & ~mask) | (mmap & ~0xfffff).
|
|
*/
|
|
|
|
#define LOONGSON_AWR_BASE_ADDRESS 0x3ff00000ULL
|
|
|
|
#define LOONGSON_AWR_BASE(master, window) \
|
|
(LOONGSON_AWR_BASE_ADDRESS + (window) * 0x08 + (master) * 0x60 + 0x00)
|
|
#define LOONGSON_AWR_SIZE(master, window) \
|
|
(LOONGSON_AWR_BASE_ADDRESS + (window) * 0x08 + (master) * 0x60 + 0x20)
|
|
#define LOONGSON_AWR_MMAP(master, window) \
|
|
(LOONGSON_AWR_BASE_ADDRESS + (window) * 0x08 + (master) * 0x60 + 0x40)
|
|
|
|
/*
|
|
* Bits in the diagnostic register
|
|
*/
|
|
|
|
#define COP_0_DIAG_ITLB_CLEAR 0x04
|
|
#define COP_0_DIAG_BTB_CLEAR 0x02
|
|
#define COP_0_DIAG_RAS_DISABLE 0x01
|
|
|
|
#endif /* MIPS3_LOONGSON2 */
|
|
|
|
#endif /* _MIPS_CPUREGS_H_ */
|