NetBSD/sys/arch/arm26/include/memcreg.h

242 lines
7.5 KiB
C

/* $NetBSD: memcreg.h,v 1.3 2001/03/28 13:04:57 bjh21 Exp $ */
/*-
* Copyright (c) 1997, 1998 Ben Harris
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* This file is part of NetBSD/arm26 -- a port of NetBSD to ARM2/3 machines. */
/*
* memcreg.h - Acorn/ARM MEMC (Anna/VC2304/VL2304/MEMC1A/VL2304A/VL86C110/VY86C110)
* registers
*/
#ifndef _ARM26_MEMCREG_H
#define _ARM26_MEMCREG_H
/*
* Accessing the MEMC is a little odd. It's not connected to the data
* bus, so the register and the new value are coded into an address.
* Thus, to set a register, OR together the register specifier and the
* new value, and write any word to the resultant address.
*/
#define MEMC_WRITE(value) *(volatile u_int32_t *)value = 0
/*
* This information is mostly derived from:
* MEMC Datasheet
* Published by Acorn Computers Limited.
* Part no 0460,019
* Issue No 1.0
* 30 September 1986
* ISBN 1 85250 025 6
*
* Thanks must go to Jeanette Draper at ARM Ltd
* <jeanette.draper@arm.com> for finding it for me.
*
* Information on master/slave MEMCs came from Tony Duell
* <ard@p850ug1.demon.co.uk>, who has a copy of the MEMC1A data
* sheet and might photocopy it for me one day.
*/
/* General memory-map layout provided by MEMC */
#define MEMC_PHYS_BASE ((caddr_t)0x02000000)
#define MEMC_IO_BASE ((caddr_t)0x03000000)
#define MEMC_VIDC_BASE ((caddr_t)0x03400000)
#define MEMC_ROM_LOW_BASE ((caddr_t)0x03400000)
#define MEMC_ROM_HIGH_BASE ((caddr_t)0x03800000)
/*
* Each MEMC can manage 4Mb in 128 pages. The memory map only has
* space for 16Mb of physical RAM.
*/
#define MEMC_MAX_PHYSPAGES 512
/*
* DMA address generator control registers. Addresses (>>4) go in
* bits 2-16, and must thus be in the bottom 512k of physical RAM.
*/
#define MEMC_DMA_MAX 0x00080000
/* Video */
#define MEMC_VINIT 0x03600000
#define MEMC_VSTART 0x03620000
#define MEMC_VEND 0x03640000
/* Cursor */
#define MEMC_CINIT 0x03660000
/* Sound */
#define MEMC_SSTARTN 0x03680000
#define MEMC_SENDN 0x036A0000
#define MEMC_SPTR 0x036C0000
#define MEMC_SET_PTR(reg,addr) (reg | (addr >> 2))
/* MEMC control register (sec 6.5) */
#define MEMC_CONTROL 0x036E0000
/* Page size */
#define MEMC_CTL_PGSZ_MASK 0x0000000C
#define MEMC_CTL_PGSZ_4K 0x00000000
#define MEMC_CTL_PGSZ_8K 0x00000004
#define MEMC_CTL_PGSZ_16K 0x00000008
#define MEMC_CTL_PGSZ_32K 0x0000000C
/* ROM speeds; low and high banks, relative to RAM speed */
#define MEMC_CTL_LROMSPD_MASK 0x00000030
#define MEMC_CTL_LROMSPD_4N 0x00000000
#define MEMC_CTL_LROMSPD_3N 0x00000010
#define MEMC_CTL_LROMSPD_2N 0x00000020
#define MEMC_CTL_LROMSPD_PAGED 0x00000030
#define MEMC_CTL_HROMSPD_MASK 0x000000C0
#define MEMC_CTL_HROMSPD_4N 0x00000000
#define MEMC_CTL_HROMSPD_3N 0x00000040
#define MEMC_CTL_HROMSPD_2N 0x00000080
#define MEMC_CTL_HROMSPD_PAGED 0x000000C0
/* DRAM refresh control */
#define MEMC_CTL_RFRSH_MASK 0x00000300
#define MEMC_CTL_RFRSH_NONE 0x00000000
#define MEMC_CTL_RFRSH_FLYBACK 0x00000100
#define MEMC_CTL_RFRSH_CONTIN 0x00000300
/* Enable video DMA */
#define MEMC_CTL_VIDEODMA 0x00000400
/* Enable sound DMA */
#define MEMC_CTL_SOUNDDMA 0x00000800
/* Operating System Mode Select */
#define MEMC_CTL_OSMODE 0x00001000
/* Test mode */
/* This should never be set in a running system */
#define MEMC_CTL_TESTMODE 0x00002000
/*
* Address translation control
*/
/* Absolute address of translation table */
#define MEMC_TRANS_BASE 0x03800000
/*
* MEMC translation entries are painful, and vary with the page size
* in use. Here, ppn is the physical page number, lpn is the logical
* page number and ppl is the page protection level.
*
* The list of transformations at the start of each macro is copied
* verbatim from the MEMC datasheet (Figure 5) with the exception of
* the entries for PPN[7] and PPN[8]. In dual-MEMC situations, PPN[7]
* selects between master and slave MEMCs, and is mapped to A[7] whatever
* the page size (though Acorn machines always use 32k pages with dual
* MEMCs). The Archimedes 540 can have up to 16Mb of RAM, and arranges
* this by having several address lines go through PALs on their way to the
* MEMCs. The upshot of this is that for the purposes of setting the
* translation tables, PPN[8] maps to A[12]. The A540 always has 32kb pages.
*/
/* Page protection levels (data sheet section 6.6) */
/*-
* PPL
* Mode 00 01 10 11
* SVC R/W R/W R/W R/W
* OS R/W R/W R R
* User R/W R - -
*/
#define MEMC_PPL_RDWR 0
#define MEMC_PPL_RDONLY 1
#define MEMC_PPL_NOACCESS 2
/*-
* 4k pages:
* PPN[7] -> A[7] (MEMC1a)
* PPN[6:0] -> A[6:0]
* PPL[1:0] -> A[9:8]
* LPN[12:11] -> A[11:10]
* LPN[10:0] -> A[22:12]
*/
#define MEMC_TRANS_ENTRY_4K(ppn, lpn, ppl) \
(MEMC_TRANS_BASE | \
((ppn) & 0xff) | \
((ppl) & 0x3) << 8 | \
((lpn) & 0x7ff) << 12 | \
((lpn) & 0x1800) >> 1)
/*-
* 8k pages:
* PPN[7] -> A[7] (MEMC1a)
* PPN[6] -> A[0]
* PPN[5:0] -> A[6:1]
* PPL[1:0] -> A[9:8]
* LPN[11:10] -> A[11:10]
* LPN[9:0] -> A[22:13]
*/
#define MEMC_TRANS_ENTRY_8K(ppn, lpn, ppl) \
(MEMC_TRANS_BASE | \
((ppn) & 0x80) | \
((ppn) & 0x40) >> 6 | \
((ppn) & 0x3f) << 1 | \
((ppl) & 0x3) << 8 | \
((lpn) & 0xc00)) | \
((lpn) & 0x3ff) << 13)
/*-
* 16k pages:
* PPN[7] -> A[7] (MEMC1a)
* PPN[6:5] -> A[1:0]
* PPN[4:0] -> A[6:2]
* PPL[1:0] -> A[9:8]
* LPN[10:9] -> A[11:10]
* LPN[9:0] -> A[22:14]
*/
#define MEMC_TRANS_ENTRY_16K(ppn, lpn, ppl) \
(MEMC_TRANS_BASE | \
((ppn) & 0x80) | \
((ppn) & 0x60) >> 5 | \
((ppn) & 0x1f) << 2 | \
((ppl) & 0x3) << 8 | \
((lpn) & 0x600) << 1 | \
((lpn) & 0x1ff) << 14)
/*-
* 32k pages (here, the MEMC descends into madness...):
* PPN[8] -> A[12] (A540)
* PPN[7] -> A[7] (MEMC1a)
* PPN[6] -> A[1]
* PPN[5] -> A[2]
* PPN[4] -> A[0]
* PPN[3:0] -> A[6:3]
* PPL[1:0] -> A[9:8]
* LPN[9:8] -> A[11:10]
* LPN[7:0] -> A[22:15]
*/
#define MEMC_TRANS_ENTRY_32K(ppn, lpn, ppl) \
(MEMC_TRANS_BASE | \
((ppn) & 0x100) << 4 | \
((ppn) & 0x80) | \
((ppn) & 0x40) >> 5 | \
((ppn) & 0x20) >> 3 | \
((ppn) & 0x10) >> 4 | \
((ppn) & 0x0f) << 3 | \
((ppl) & 0x3) << 8 | \
((lpn) & 0x300) << 2 | \
((lpn) & 0x0ff) << 15)
#endif