NetBSD/sys/arch/sun3/dev/si.c

457 lines
12 KiB
C

/* $NetBSD: si.c,v 1.46 1999/11/22 18:34:00 jdolecek Exp $ */
/*-
* Copyright (c) 1996 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Adam Glass, David Jones, and Gordon W. Ross.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* This file contains only the machine-dependent parts of the
* Sun3 SCSI driver. (Autoconfig stuff and DMA functions.)
* The machine-independent parts are in ncr5380sbc.c
*
* Supported hardware includes:
* Sun SCSI-3 on OBIO (Sun3/50,Sun3/60)
* Sun SCSI-3 on VME (Sun3/160,Sun3/260)
*
* Could be made to support the Sun3/E if someone wanted to.
*
* Note: Both supported variants of the Sun SCSI-3 adapter have
* some really unusual "features" for this driver to deal with,
* generally related to the DMA engine. The OBIO variant will
* ignore any attempt to write the FIFO count register while the
* SCSI bus is in DATA_IN or DATA_OUT phase. This is dealt with
* by setting the FIFO count early in COMMAND or MSG_IN phase.
*
* The VME variant has a bit to enable or disable the DMA engine,
* but that bit also gates the interrupt line from the NCR5380!
* Therefore, in order to get any interrupt from the 5380, (i.e.
* for reselect) one must clear the DMA engine transfer count and
* then enable DMA. This has the further complication that you
* CAN NOT touch the NCR5380 while the DMA enable bit is set, so
* we have to turn DMA back off before we even look at the 5380.
*
* What wonderfully whacky hardware this is!
*
* Credits, history:
*
* David Jones wrote the initial version of this module, which
* included support for the VME adapter only. (no reselection).
*
* Gordon Ross added support for the OBIO adapter, and re-worked
* both the VME and OBIO code to support disconnect/reselect.
* (Required figuring out the hardware "features" noted above.)
*
* The autoconfiguration boilerplate came from Adam Glass.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/errno.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/device.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsipi_debug.h>
#include <dev/scsipi/scsiconf.h>
#include <machine/autoconf.h>
#include <machine/dvma.h>
/* #define DEBUG XXX */
#include <dev/ic/ncr5380reg.h>
#include <dev/ic/ncr5380var.h>
#include "sireg.h"
#include "sivar.h"
/*
* Transfers smaller than this are done using PIO
* (on assumption they're not worth DMA overhead)
*/
#define MIN_DMA_LEN 128
int si_debug = 0;
#ifdef DEBUG
static int si_link_flags = 0 /* | SDEV_DB2 */ ;
#endif
/* How long to wait for DMA before declaring an error. */
int si_dma_intr_timo = 500; /* ticks (sec. X 100) */
static void si_minphys __P((struct buf *));
/* This is copied from julian's bt driver */
/* "so we have a default dev struct for our link struct." */
static struct scsipi_device si_dev = {
NULL, /* Use default error handler. */
NULL, /* Use default start handler. */
NULL, /* Use default async handler. */
NULL, /* Use default "done" routine. */
};
/*
* New-style autoconfig attachment. The cfattach
* structures are in si_obio.c and si_vme.c
*/
void
si_attach(sc)
struct si_softc *sc;
{
struct ncr5380_softc *ncr_sc = (void *)sc;
volatile struct si_regs *regs = sc->sc_regs;
int i;
/*
* Support the "options" (config file flags).
* Disconnect/reselect is a per-target mask.
* Interrupts and DMA are per-controller.
*/
ncr_sc->sc_no_disconnect =
(sc->sc_options & SI_NO_DISCONNECT);
ncr_sc->sc_parity_disable =
(sc->sc_options & SI_NO_PARITY_CHK) >> 8;
if (sc->sc_options & SI_FORCE_POLLING)
ncr_sc->sc_flags |= NCR5380_FORCE_POLLING;
#if 1 /* XXX - Temporary */
/* XXX - In case we think DMA is completely broken... */
if (sc->sc_options & SI_DISABLE_DMA) {
/* Override this function pointer. */
ncr_sc->sc_dma_alloc = NULL;
}
#endif
ncr_sc->sc_min_dma_len = MIN_DMA_LEN;
/*
* Fill in the adapter.
*/
ncr_sc->sc_adapter.scsipi_cmd = ncr5380_scsi_cmd;
ncr_sc->sc_adapter.scsipi_minphys = si_minphys;
/*
* Fill in the prototype scsi_link.
*/
ncr_sc->sc_link.scsipi_scsi.channel = SCSI_CHANNEL_ONLY_ONE;
ncr_sc->sc_link.adapter_softc = sc;
ncr_sc->sc_link.scsipi_scsi.adapter_target = 7;
ncr_sc->sc_link.adapter = &ncr_sc->sc_adapter;
ncr_sc->sc_link.device = &si_dev;
ncr_sc->sc_link.type = BUS_SCSI;
#ifdef DEBUG
if (si_debug)
printf("si: Set TheSoftC=%p TheRegs=%p\n", sc, regs);
ncr_sc->sc_link.flags |= si_link_flags;
#endif
/*
* Initialize fields used by the MI code
*/
ncr_sc->sci_r0 = &regs->sci.sci_r0;
ncr_sc->sci_r1 = &regs->sci.sci_r1;
ncr_sc->sci_r2 = &regs->sci.sci_r2;
ncr_sc->sci_r3 = &regs->sci.sci_r3;
ncr_sc->sci_r4 = &regs->sci.sci_r4;
ncr_sc->sci_r5 = &regs->sci.sci_r5;
ncr_sc->sci_r6 = &regs->sci.sci_r6;
ncr_sc->sci_r7 = &regs->sci.sci_r7;
/*
* Allocate DMA handles.
*/
i = SCI_OPENINGS * sizeof(struct si_dma_handle);
sc->sc_dma = (struct si_dma_handle *)
malloc(i, M_DEVBUF, M_WAITOK);
if (sc->sc_dma == NULL)
panic("si: dvma_malloc failed\n");
for (i = 0; i < SCI_OPENINGS; i++)
sc->sc_dma[i].dh_flags = 0;
/*
* Initialize si board itself.
*/
ncr5380_init(ncr_sc);
ncr5380_reset_scsibus(ncr_sc);
config_found(&(ncr_sc->sc_dev), &(ncr_sc->sc_link), scsiprint);
}
static void
si_minphys(struct buf *bp)
{
if (bp->b_bcount > MAX_DMA_LEN) {
#ifdef DEBUG
if (si_debug) {
printf("si_minphys len = 0x%lx.\n", bp->b_bcount);
Debugger();
}
#endif
bp->b_bcount = MAX_DMA_LEN;
}
return (minphys(bp));
}
#define CSR_WANT (SI_CSR_SBC_IP | SI_CSR_DMA_IP | \
SI_CSR_DMA_CONFLICT | SI_CSR_DMA_BUS_ERR )
int
si_intr(void *arg)
{
struct si_softc *sc = arg;
volatile struct si_regs *si = sc->sc_regs;
int dma_error, claimed;
u_short csr;
claimed = 0;
dma_error = 0;
/* SBC interrupt? DMA interrupt? */
csr = si->si_csr;
NCR_TRACE("si_intr: csr=0x%x\n", csr);
if (csr & SI_CSR_DMA_CONFLICT) {
dma_error |= SI_CSR_DMA_CONFLICT;
printf("si_intr: DMA conflict\n");
}
if (csr & SI_CSR_DMA_BUS_ERR) {
dma_error |= SI_CSR_DMA_BUS_ERR;
printf("si_intr: DMA bus error\n");
}
if (dma_error) {
if (sc->ncr_sc.sc_state & NCR_DOINGDMA)
sc->ncr_sc.sc_state |= NCR_ABORTING;
/* Make sure we will call the main isr. */
csr |= SI_CSR_DMA_IP;
}
if (csr & (SI_CSR_SBC_IP | SI_CSR_DMA_IP)) {
claimed = ncr5380_intr(&sc->ncr_sc);
#ifdef DEBUG
if (!claimed) {
printf("si_intr: spurious from SBC\n");
if (si_debug & 4)
Debugger(); /* XXX */
}
#endif
/* Yes, we DID cause this interrupt. */
claimed = 1;
}
return (claimed);
}
/*****************************************************************
* Common functions for DMA
****************************************************************/
/*
* Allocate a DMA handle and put it in sc->sc_dma. Prepare
* for DMA transfer. On the Sun3, this means mapping the buffer
* into DVMA space. dvma_mapin() flushes the cache for us.
*/
void
si_dma_alloc(ncr_sc)
struct ncr5380_softc *ncr_sc;
{
struct si_softc *sc = (struct si_softc *)ncr_sc;
struct sci_req *sr = ncr_sc->sc_current;
struct scsipi_xfer *xs = sr->sr_xs;
struct si_dma_handle *dh;
int i, xlen;
u_long addr;
#ifdef DIAGNOSTIC
if (sr->sr_dma_hand != NULL)
panic("si_dma_alloc: already have DMA handle");
#endif
addr = (u_long) ncr_sc->sc_dataptr;
xlen = ncr_sc->sc_datalen;
/* If the DMA start addr is misaligned then do PIO */
if ((addr & 1) || (xlen & 1)) {
printf("si_dma_alloc: misaligned.\n");
return;
}
/* Make sure our caller checked sc_min_dma_len. */
if (xlen < MIN_DMA_LEN)
panic("si_dma_alloc: xlen=0x%x\n", xlen);
/*
* Never attempt single transfers of more than 63k, because
* our count register may be only 16 bits (an OBIO adapter).
* This should never happen since already bounded by minphys().
* XXX - Should just segment these...
*/
if (xlen > MAX_DMA_LEN) {
printf("si_dma_alloc: excessive xlen=0x%x\n", xlen);
Debugger();
ncr_sc->sc_datalen = xlen = MAX_DMA_LEN;
}
/* Find free DMA handle. Guaranteed to find one since we have
as many DMA handles as the driver has processes. */
for (i = 0; i < SCI_OPENINGS; i++) {
if ((sc->sc_dma[i].dh_flags & SIDH_BUSY) == 0)
goto found;
}
panic("si: no free DMA handles.");
found:
dh = &sc->sc_dma[i];
dh->dh_flags = SIDH_BUSY;
dh->dh_addr = (u_char*) addr;
dh->dh_maplen = xlen;
dh->dh_dvma = 0;
/* Copy the "write" flag for convenience. */
if (xs->xs_control & XS_CTL_DATA_OUT)
dh->dh_flags |= SIDH_OUT;
#if 0
/*
* Some machines might not need to remap B_PHYS buffers.
* The sun3 does not map B_PHYS buffers into DVMA space,
* (they are mapped into normal KV space) so on the sun3
* we must always remap to a DVMA address here. Re-map is
* cheap anyway, because it's done by segments, not pages.
*/
if (xs->bp && (xs->bp->b_flags & B_PHYS))
dh->dh_flags |= SIDH_PHYS;
#endif
dh->dh_dvma = dvma_mapin((char *)addr, xlen, 0);
if (!dh->dh_dvma) {
/* Can't remap segment */
printf("si_dma_alloc: can't remap %p/0x%x\n",
dh->dh_addr, dh->dh_maplen);
dh->dh_flags = 0;
return;
}
/* success */
sr->sr_dma_hand = dh;
return;
}
void
si_dma_free(ncr_sc)
struct ncr5380_softc *ncr_sc;
{
struct sci_req *sr = ncr_sc->sc_current;
struct si_dma_handle *dh = sr->sr_dma_hand;
#ifdef DIAGNOSTIC
if (dh == NULL)
panic("si_dma_free: no DMA handle");
#endif
if (ncr_sc->sc_state & NCR_DOINGDMA)
panic("si_dma_free: free while in progress");
if (dh->dh_flags & SIDH_BUSY) {
/* XXX - Should separate allocation and mapping. */
/* Give back the DVMA space. */
dvma_mapout(dh->dh_dvma, dh->dh_maplen);
dh->dh_dvma = 0;
dh->dh_flags = 0;
}
sr->sr_dma_hand = NULL;
}
#define CSR_MASK (SI_CSR_SBC_IP | SI_CSR_DMA_IP | \
SI_CSR_DMA_CONFLICT | SI_CSR_DMA_BUS_ERR)
#define POLL_TIMO 50000 /* X100 = 5 sec. */
/*
* Poll (spin-wait) for DMA completion.
* Called right after xx_dma_start(), and
* xx_dma_stop() will be called next.
* Same for either VME or OBIO.
*/
void
si_dma_poll(ncr_sc)
struct ncr5380_softc *ncr_sc;
{
struct si_softc *sc = (struct si_softc *)ncr_sc;
struct sci_req *sr = ncr_sc->sc_current;
volatile struct si_regs *si = sc->sc_regs;
int tmo;
/* Make sure DMA started successfully. */
if (ncr_sc->sc_state & NCR_ABORTING)
return;
/*
* XXX: The Sun driver waits for ~SI_CSR_DMA_ACTIVE here
* XXX: (on obio) or even worse (on vme) a 10mS. delay!
* XXX: I really doubt that is necessary...
*/
/* Wait for any "dma complete" or error bits. */
tmo = POLL_TIMO;
for (;;) {
if (si->si_csr & CSR_MASK)
break;
if (--tmo <= 0) {
printf("si: DMA timeout (while polling)\n");
/* Indicate timeout as MI code would. */
sr->sr_flags |= SR_OVERDUE;
break;
}
delay(100);
}
NCR_TRACE("si_dma_poll: waited %d\n",
POLL_TIMO - tmo);
#ifdef DEBUG
if (si_debug & 2) {
printf("si_dma_poll: done, csr=0x%x\n", si->si_csr);
}
#endif
}