457 lines
15 KiB
Plaintext
457 lines
15 KiB
Plaintext
# $NetBSD: AMIGA,v 1.55 2002/09/18 02:16:01 lukem Exp $
|
|
#
|
|
# This file was automatically created.
|
|
# Changes will be lost when make is run in this directory.
|
|
#
|
|
# Created from: # NetBSD: GENERIC.in,v 1.3 2002/09/18 02:15:09 lukem Exp $
|
|
#
|
|
# GENERIC machine description file
|
|
#
|
|
# This machine description file is used to generate the default NetBSD
|
|
# kernel. The generic kernel does not include all options, subsystems
|
|
# and device drivers, but should be useful for most applications.
|
|
#
|
|
# The machine description file can be customised for your specific
|
|
# machine to reduce the kernel size and improve its performance.
|
|
#
|
|
# For further information on compiling NetBSD kernels, see the config(8)
|
|
# man page.
|
|
#
|
|
# For further information on hardware support for this architecture, see
|
|
# the intro(4) man page. For further information about kernel options
|
|
# for this architecture, see the options(4) man page. For an explanation
|
|
# of each device driver in this file see the section 4 man page for the
|
|
# device.
|
|
|
|
|
|
include "arch/amiga/conf/std.amiga"
|
|
|
|
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
|
|
#ident "GENERIC-$Revision: 1.55 $"
|
|
|
|
|
|
maxusers 8
|
|
options RTC_OFFSET=0
|
|
|
|
#
|
|
# mainboards to support (in addition to Amiga)
|
|
#
|
|
options BB060STUPIDROM # You need this, if you have a non-DraCo
|
|
# MC68060 with an OS ROM up to (at least)
|
|
# V40 (OS3.1) and want to boot with the
|
|
# bootblock.
|
|
# You do not need this if you have a DraCo,
|
|
# have no 68060 or NEVER use the bootblock
|
|
options P5PPC68KBOARD # Phase5 PPC/68K board support
|
|
#
|
|
# processors this kernel should support
|
|
#
|
|
options M68060 # support for 060
|
|
options M060SP # MC68060 software support (Required for 060)
|
|
options M68040 # support for 040
|
|
options FPSP # MC68040 floating point support
|
|
options M68030 # support for 030
|
|
options M68020 # support for 020/851
|
|
options FPU_EMULATE # FPU emulation
|
|
|
|
#
|
|
# Networking options
|
|
#
|
|
options INET # IP networking support (Required)
|
|
options INET6 # IPV6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
#options GATEWAY # Packet forwarding
|
|
#options DIRECTED_BROADCAST # Broadcast across subnets
|
|
|
|
#options MROUTING # Multicast routing
|
|
options NS # XNS
|
|
#options NSIP # XNS tunneling over IP
|
|
options ISO,TPIP # OSI
|
|
#options EON # OSI tunneling over IP
|
|
options CCITT,LLC,HDLC # X.25
|
|
options NETATALK # AppleTalk networking protocols
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
|
options PPP_DEFLATE # Deflate compression support for PPP
|
|
options PPP_FILTER # Active filter support for PPP (requires bpf)
|
|
options PFIL_HOOKS # pfil(9) packet filter hooks
|
|
options IPFILTER_LOG # ipmon(8) log support
|
|
|
|
# Filesystems
|
|
file-system FFS # Berkeley fast file system
|
|
file-system EXT2FS # second extended file system (linux)
|
|
#file-system LFS # log-structured filesystem (experimental)
|
|
|
|
file-system MFS # Memory based filesystem
|
|
|
|
file-system NFS # Network File System client side code
|
|
file-system ADOSFS # AmigaDOS file system
|
|
file-system CD9660 # ISO 9660 + Rock Ridge filesystem
|
|
file-system MSDOSFS # MS-DOS filesystem
|
|
|
|
file-system KERNFS # kernel data-structure filesystem
|
|
|
|
file-system FDESC # user file descriptor filesystem
|
|
file-system NULLFS # loopback filesystem
|
|
file-system OVERLAY # overlay filesystem
|
|
#file-system PORTAL # Portal filesystem
|
|
file-system PROCFS # /proc filesystem
|
|
file-system UMAPFS # NULLFS + uid and gid remapping
|
|
file-system UNION # union filesystem
|
|
|
|
# Filesystem options
|
|
|
|
#options FFS_EI # FFS Endian Independant support
|
|
|
|
options QUOTA # User and group quotas in FFS
|
|
options SOFTDEP # FFS soft updates support.
|
|
options NFSSERVER # Network File System server side code
|
|
|
|
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
|
|
# immutable) behave as system flags.
|
|
|
|
#
|
|
# Compatibility options for various existing systems
|
|
#
|
|
|
|
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
|
options COMPAT_43 # compatibility with 4.3BSD interfaces
|
|
options COMPAT_09 # compatibility with NetBSD 0.9
|
|
options COMPAT_10 # compatibility with NetBSD 1.0
|
|
options COMPAT_12 # compatibility with NetBSD 1.2
|
|
options COMPAT_13 # compatibility with NetBSD 1.3
|
|
options COMPAT_14 # compatibility with NetBSD 1.4
|
|
options COMPAT_SUNOS # Support to run Sun (m68k) executables
|
|
options COMPAT_SVR4 # Support to run SVR4 (m68k) executables
|
|
options COMPAT_NOMID # allow nonvalid machine id executables
|
|
#options COMPAT_LINUX # Support to run Linux/m68k executables
|
|
|
|
options EXEC_AOUT # 32-bit aout executables (NetBSD-1.5.x)
|
|
options COMPAT_AOUT_M68K # actually make some system calls work.
|
|
|
|
#
|
|
# Support for System V IPC facilities.
|
|
#
|
|
options SYSVSHM # System V-like shared memory
|
|
options SYSVMSG # System V-like messages
|
|
options SYSVSEM # System V-like semaphores
|
|
#options SEMMNI=10 # number of semaphore identifiers
|
|
#options SEMMNS=60 # number of semaphores in system
|
|
#options SEMUME=10 # max number of undo entries per process
|
|
#options SEMMNU=30 # number of undo structures in system
|
|
|
|
#
|
|
# Support for various kernel options
|
|
#
|
|
|
|
options KTRACE # system call tracing support
|
|
options LKM # Loadable kernel modules
|
|
options UCONSOLE # anyone can redirect a virtual console
|
|
#options INSECURE # disable kernel security levels
|
|
options SCSIVERBOSE # human readable SCSI error messages
|
|
options USERCONF # userconf(4) support
|
|
options NTP # NTP phase/frequency locked loop
|
|
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
|
|
#
|
|
# Misc. debugging options
|
|
#
|
|
options DDB # Kernel debugger
|
|
#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
|
|
options DIAGNOSTIC # Extra kernel sanity checks
|
|
#options DEBUG # Enable misc. kernel debugging code
|
|
#options SYSCALL_DEBUG # debug all syscalls.
|
|
#options SCSIDEBUG # Add SCSI debugging statements
|
|
#options PANICBUTTON # Forced crash via keypress (?)
|
|
|
|
#
|
|
# Amiga specific options
|
|
#
|
|
#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the
|
|
# first bank of RAM. (default: unlimited)
|
|
#options NKPTADD=4 # set this for 4 additional KPT pages
|
|
#options NKPTADDSHIFT=24 # set this for 1 additional KPT page
|
|
# per 16 MB (1<<24 bytes) of RAM
|
|
# uncomment and decrease this, or uncomment and
|
|
# increase NKPTADD if you get "out of PT pages"
|
|
# panics.
|
|
|
|
# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
|
|
# before the 10 secondinterval ends, or that KBDRESET does work at all.
|
|
#options KBDRESET # sync on Ctrl-Amiga-Amiga
|
|
|
|
# These options improve performance with the built-in serial port
|
|
# on slower Amigas. Try the larger buffers first then lev6_defer.
|
|
#options SERIBUF_SIZE=4096
|
|
#options SEROBUF_SIZE=32
|
|
#options LEV6_DEFER # defers l6 to l4 (below serial l5)
|
|
|
|
options RETINACONSOLE # enable code to allow retina to be console
|
|
options ULOWELLCONSOLE # enable code to allow a2410 to be console
|
|
options CL5426CONSOLE # Cirrus console
|
|
options CV64CONSOLE # CyberVision console
|
|
options TSENGCONSOLE # Tseng console
|
|
options CV3DCONSOLE # CyberVision 64/3D console
|
|
|
|
options GRF_ECS # Enhanced Chip Set
|
|
options GRF_NTSC # NTSC
|
|
options GRF_PAL # PAL
|
|
options GRF_A2024 # Support for the A2024
|
|
options GRF_AGA # AGA Chip Set
|
|
options GRF_AGA_VGA # AGA VGAONLY timing
|
|
options GRF_SUPER72 # AGA Super-72
|
|
#options KFONT_8X11 # 8x11 font
|
|
|
|
# select a font for the console according to the character set and keymap
|
|
# you want to use
|
|
options KFONT_CONS_ISO8859_1
|
|
#options KFONT_CONS_ISO8859_2
|
|
|
|
# This is how you would tell the kernel the A2410 oscillator frequencies:
|
|
# The used frequencies are the defaults, and do not need option setting
|
|
#options ULOWELL_OSC1=36000000
|
|
#options ULOWELL_OSC2=66667000
|
|
|
|
# This is how you specify the blitting speed, higher values may speed up blits
|
|
# a littel bit. If you raise this value too much some trash may appear.
|
|
# the commented version is the default.
|
|
#options RH_MEMCLK=61000000
|
|
# this option enables the 64 bit sprite which does not work
|
|
# for quite a few people. E.g. The cursor sprite will turn to a block
|
|
# when moved to the top of the screen in X.
|
|
#options RH_64BIT_SPRITE
|
|
# enables fast scroll code appears to now work on 040 systems.
|
|
#options RETINA_SPEED_HACK
|
|
# enables the Hardwarecursor which does not work on some systems.
|
|
#options RH_HARDWARECURSOR
|
|
|
|
# wscons aware interface to amiga custom chips.
|
|
# If you enable it enable also wskbd.
|
|
#
|
|
|
|
#amidisplaycc0 at mainbus0 # wscons interface to custom chips
|
|
#wsdisplay0 at amidisplaycc0 console ?
|
|
#options WSEMUL_VT100
|
|
#options FONT_BOLD8x16
|
|
#options FONT_VT220L8x10
|
|
|
|
grfcc0 at mainbus0 # custom chips
|
|
grfrt0 at zbus0 # retina II
|
|
grfrh0 at zbus0 # retina III
|
|
grfcl* at zbus0 # Picasso II/Piccolo/Spectrum
|
|
grful0 at zbus0 # A2410
|
|
grfcv0 at zbus0 # CyberVision 64
|
|
grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin)
|
|
grfcv3d0 at zbus0 # CyberVision 64/3D
|
|
|
|
grf0 at grfcc0
|
|
grf1 at grfrt0
|
|
grf2 at grfrh0
|
|
grf3 at grfcl?
|
|
grf4 at grful0
|
|
grf5 at grfcv0
|
|
grf6 at grfet?
|
|
grf7 at grfcv3d0
|
|
ite0 at grf0 # terminal emulators for grfs
|
|
ite1 at grf1 # terminal emulators for grfs
|
|
ite2 at grf2 # terminal emulators for grfs
|
|
ite3 at grf3 # terminal emulators for grfs
|
|
ite4 at grf4 # terminal emulators for grfs
|
|
ite5 at grf5 # terminal emulators for grfs
|
|
ite6 at grf6 # terminal emulators for grfs
|
|
ite7 at grf7 # terminal emulators for grfs
|
|
|
|
msc0 at zbus0 # A2232 MSC multiport serial.
|
|
mfc0 at zbus0 # MultiFaceCard I/O board
|
|
mfcs0 at mfc0 unit 0 # MFC serial
|
|
mfcs1 at mfc0 unit 1 # MFC serial
|
|
#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet]
|
|
#mfc1 at zbus0 # MultiFaceCard 2nd I/O board
|
|
#mfcs2 at mfc1 unit 0
|
|
#mfcs3 at mfc1 unit 1
|
|
#mfcp1 at mfc1 unit 0
|
|
|
|
hyper* at zbus? # zbus HyperCom3/3+/4/4+
|
|
#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3
|
|
com* at hyper? port ? # Hypercom3/4 serial ports
|
|
lpt* at hyper? port ? # Hypercom3+/4+ parallel port
|
|
|
|
#options IOBZCLOCK=22118400 # default, uncomment the next line
|
|
#options IOBZCLOCK=24000000 # if needed.
|
|
|
|
iobl* at zbus? # zbus IOBlix
|
|
com* at iobl? port ? # IOBlix serial ports
|
|
lpt* at iobl? port ? # IOBlix parallel ports
|
|
|
|
|
|
#
|
|
# Keyboard device. Optionally can attach a wskbd.
|
|
# wskbd works together with a wsdisplay so enable them both if you will.
|
|
# Don't enable wskbd if you use ite.
|
|
#
|
|
# XXX in std.amiga: kbd0 at mainbus0
|
|
|
|
#wskbd0 at kbd0 console ?
|
|
|
|
|
|
#
|
|
# Amiga Mainboard devices (sans graphics and keyboard)
|
|
#
|
|
|
|
ser0 at mainbus0 # Amiga onboard serial
|
|
par0 at mainbus0 # Amiga onboard parallel
|
|
ms* at mainbus0 # Amiga mice
|
|
fdc0 at mainbus0 # Amiga FDC
|
|
fd* at fdc0 unit ? # floppy disks on the later
|
|
a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock
|
|
a2kbbc0 at mainbus0 # A2000 battery backed clock
|
|
aucc* at mainbus0 # Amiga CC audio
|
|
audio* at aucc?
|
|
|
|
|
|
#
|
|
# Zorro-II, Zorro-III, DraCo Direct-Bus devices (sans graphics)
|
|
#
|
|
|
|
# Alas, Melody-Z2 dont configure in the DraCo bus.
|
|
melody* at zbus0 # Melody MPEG audio decoder
|
|
audio* at melody?
|
|
|
|
repulse* at zbus0 # ALiENDESiGN Repulse
|
|
audio* at repulse?
|
|
|
|
toccata* at zbus0 # MacroSystem GmbH Toccata
|
|
audio* at toccata?
|
|
|
|
# Ethernet cards:
|
|
le* at zbus0 # A2065, Ameristar, Ariadne
|
|
ne* at zbus0 # AriadneII, X-surf
|
|
ed* at zbus0 # Hydra, ASDG LanRover
|
|
es* at zbus0 # CEI A4066 EthernetPLUS
|
|
qn* at zbus0 # Quicknet
|
|
|
|
# Arcnet
|
|
bah* at zbus0 # C=/Ameristar A2060 / 560
|
|
|
|
# Greater Valley Product Bus
|
|
gvpbus* at zbus0
|
|
|
|
# scsi stuff, all possible
|
|
gtsc0 at gvpbus? # GVP series II scsi
|
|
scsibus* at gtsc0
|
|
ahsc0 at mainbus0 # A3000 scsi
|
|
scsibus* at ahsc0
|
|
atzsc0 at zbus0 # A2091 scsi
|
|
scsibus* at atzsc0
|
|
wstsc0 at zbus0 # Wordsync II scsi
|
|
scsibus* at wstsc0
|
|
ivsc0 at zbus0 # IVS scsi
|
|
scsibus* at ivsc0
|
|
mlhsc0 at zbus0 # Hacker scsi
|
|
scsibus* at mlhsc0
|
|
otgsc0 at zbus0 # 12 gauge scsi
|
|
scsibus* at otgsc0
|
|
zssc0 at zbus0 # Zeus scsi
|
|
scsibus* at zssc0
|
|
mgnsc0 at zbus0 # Magnum scsi
|
|
scsibus* at mgnsc0
|
|
wesc0 at zbus0 # Warp Engine scsi
|
|
scsibus* at wesc0
|
|
afsc0 at zbus0 # A4091 scsi
|
|
scsibus* at afsc0
|
|
aftsc0 at mainbus0 # A4000T scsi
|
|
scsibus* at aftsc0
|
|
flsc0 at zbus0 # FastlaneZ3 scsi
|
|
scsibus* at flsc0
|
|
bzsc0 at zbus0 # Blizzard 1230 I,II scsi
|
|
scsibus* at bzsc0
|
|
bzivsc0 at zbus0 # Blizzard 12x0 IV scsi
|
|
scsibus* at bzivsc0
|
|
bztzsc0 at zbus0 # Blizzard 2060 scsi
|
|
scsibus* at bztzsc0
|
|
cbsc0 at zbus0 # CyberSCSI I
|
|
scsibus* at cbsc0
|
|
cbiisc0 at zbus0 # CyberSCSI II
|
|
scsibus* at cbiisc0
|
|
cbiiisc0 at zbus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI
|
|
scsibus* at cbiiisc0
|
|
empsc0 at zbus0 # Emplant scsi
|
|
scsibus* at empsc0
|
|
#idesc0 at mainbus0 # A4000 & A1200 IDE
|
|
#scsibus* at idesc0
|
|
|
|
# <<< comment out the wdc/atapibus entries below if the idesc lines above >>>
|
|
# <<< are uncommented >>>
|
|
wdc0 at mainbus0 # A4000 & A1200 IDE bus
|
|
wd* at wdc? drive ? # + drives
|
|
atapibus* at wdc? channel ? # ATAPI bus
|
|
cd* at atapibus? drive ? # ATAPI CD-ROM drives
|
|
sd* at atapibus? drive ? # ATAPI disk drives
|
|
|
|
pccard0 at mainbus0
|
|
pcmcia* at pccard0
|
|
com* at pcmcia? function ? # Modems and serial cards
|
|
pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards
|
|
aic* at pcmcia? function ? # Adaptec APA-1460 SCSI
|
|
wdc* at pcmcia? function ?
|
|
awi* at pcmcia? function ? # BayStack 650 (802.11FH)
|
|
ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
|
|
mbe* at pcmcia? function ? # MB8696x based Ethernet
|
|
ne* at pcmcia? function ? # NE2000-compatible Ethernet
|
|
sm* at pcmcia? function ? # Megahertz Ethernet
|
|
mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards
|
|
com* at mhzc?
|
|
sm* at mhzc?
|
|
|
|
|
|
|
|
|
|
# each hard drive from low target to high
|
|
# will configure to the next available sd unit number
|
|
sd* at scsibus? target ? lun ? # scsi disks
|
|
st* at scsibus? target ? lun ? # scsi tapes
|
|
cd* at scsibus? target ? lun ? # scsi cds
|
|
ch* at scsibus? target ? lun ? # scsi autochangers
|
|
ss* at scsibus? target ? lun ? # scsi scanner
|
|
uk* at scsibus? target ? lun ? # scsi unknown
|
|
|
|
pseudo-device loop # loopback network interface
|
|
pseudo-device sl 1 # SLIP network interfaces
|
|
pseudo-device ppp 1 # PPP network interfaces
|
|
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
|
pseudo-device tun 1 # network tunnel line discipline
|
|
#pseudo-device gre 2 # generic L3 over IP tunnel
|
|
pseudo-device bpfilter 16 # Berkeley packet filter
|
|
pseudo-device ipfilter # IP Filter package
|
|
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
|
|
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
|
|
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
|
|
pseudo-device vlan # IEEE 802.1q encapsulation
|
|
pseudo-device bridge # simple inter-network bridging
|
|
|
|
pseudo-device view 4 # views (needed for grfcc)
|
|
pseudo-device pty # pseudo-terminals
|
|
pseudo-device clockctl # user control of clock subsystem
|
|
|
|
pseudo-device vnd 4 # vnode pseudo-disks
|
|
pseudo-device ccd 4 # concatenated disk devices
|
|
pseudo-device raid 8 # RAIDframe disk driver
|
|
options RAID_AUTOCONFIG # auto-configuration of RAID components
|
|
# Options to enable various other RAIDframe RAID types.
|
|
# options RF_INCLUDE_EVENODD=1
|
|
# options RF_INCLUDE_RAID5_RS=1
|
|
# options RF_INCLUDE_PARITYLOGGING=1
|
|
# options RF_INCLUDE_CHAINDECLUSTER=1
|
|
# options RF_INCLUDE_INTERDECLUSTER=1
|
|
# options RF_INCLUDE_PARITY_DECLUSTERING=1
|
|
# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
|
|
|
|
pseudo-device rnd # /dev/random and in-kernel generator
|
|
#options RND_COM # use "com" randomness as well (BROKEN)
|
|
|
|
config netbsd root on ? type ?
|