1257 lines
35 KiB
C
1257 lines
35 KiB
C
/* $NetBSD: pci_subr.c,v 1.59 2004/08/02 18:43:38 mycroft Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1997 Zubin D. Dittia. All rights reserved.
|
|
* Copyright (c) 1995, 1996, 1998, 2000
|
|
* Christopher G. Demetriou. All rights reserved.
|
|
* Copyright (c) 1994 Charles M. Hannum. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Charles M. Hannum.
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* PCI autoconfiguration support functions.
|
|
*
|
|
* Note: This file is also built into a userland library (libpci).
|
|
* Pay attention to this when you make modifications.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: pci_subr.c,v 1.59 2004/08/02 18:43:38 mycroft Exp $");
|
|
|
|
#ifdef _KERNEL_OPT
|
|
#include "opt_pci.h"
|
|
#endif
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
|
|
#ifdef _KERNEL
|
|
#include <machine/intr.h>
|
|
#else
|
|
#include <pci.h>
|
|
#include <stdio.h>
|
|
#endif
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#ifdef _KERNEL
|
|
#include <dev/pci/pcivar.h>
|
|
#endif
|
|
#ifdef PCIVERBOSE
|
|
#include <dev/pci/pcidevs.h>
|
|
#endif
|
|
|
|
/*
|
|
* Descriptions of known PCI classes and subclasses.
|
|
*
|
|
* Subclasses are described in the same way as classes, but have a
|
|
* NULL subclass pointer.
|
|
*/
|
|
struct pci_class {
|
|
const char *name;
|
|
int val; /* as wide as pci_{,sub}class_t */
|
|
const struct pci_class *subclasses;
|
|
};
|
|
|
|
const struct pci_class pci_subclass_prehistoric[] = {
|
|
{ "miscellaneous", PCI_SUBCLASS_PREHISTORIC_MISC, },
|
|
{ "VGA", PCI_SUBCLASS_PREHISTORIC_VGA, },
|
|
{ 0 }
|
|
};
|
|
|
|
const struct pci_class pci_subclass_mass_storage[] = {
|
|
{ "SCSI", PCI_SUBCLASS_MASS_STORAGE_SCSI, },
|
|
{ "IDE", PCI_SUBCLASS_MASS_STORAGE_IDE, },
|
|
{ "floppy", PCI_SUBCLASS_MASS_STORAGE_FLOPPY, },
|
|
{ "IPI", PCI_SUBCLASS_MASS_STORAGE_IPI, },
|
|
{ "RAID", PCI_SUBCLASS_MASS_STORAGE_RAID, },
|
|
{ "ATA", PCI_SUBCLASS_MASS_STORAGE_ATA, },
|
|
{ "SATA", PCI_SUBCLASS_MASS_STORAGE_SATA, },
|
|
{ "miscellaneous", PCI_SUBCLASS_MASS_STORAGE_MISC, },
|
|
{ 0 },
|
|
};
|
|
|
|
const struct pci_class pci_subclass_network[] = {
|
|
{ "ethernet", PCI_SUBCLASS_NETWORK_ETHERNET, },
|
|
{ "token ring", PCI_SUBCLASS_NETWORK_TOKENRING, },
|
|
{ "FDDI", PCI_SUBCLASS_NETWORK_FDDI, },
|
|
{ "ATM", PCI_SUBCLASS_NETWORK_ATM, },
|
|
{ "ISDN", PCI_SUBCLASS_NETWORK_ISDN, },
|
|
{ "WorldFip", PCI_SUBCLASS_NETWORK_WORLDFIP, },
|
|
{ "PCMIG Multi Computing", PCI_SUBCLASS_NETWORK_PCIMGMULTICOMP, },
|
|
{ "miscellaneous", PCI_SUBCLASS_NETWORK_MISC, },
|
|
{ 0 },
|
|
};
|
|
|
|
const struct pci_class pci_subclass_display[] = {
|
|
{ "VGA", PCI_SUBCLASS_DISPLAY_VGA, },
|
|
{ "XGA", PCI_SUBCLASS_DISPLAY_XGA, },
|
|
{ "3D", PCI_SUBCLASS_DISPLAY_3D, },
|
|
{ "miscellaneous", PCI_SUBCLASS_DISPLAY_MISC, },
|
|
{ 0 },
|
|
};
|
|
|
|
const struct pci_class pci_subclass_multimedia[] = {
|
|
{ "video", PCI_SUBCLASS_MULTIMEDIA_VIDEO, },
|
|
{ "audio", PCI_SUBCLASS_MULTIMEDIA_AUDIO, },
|
|
{ "telephony", PCI_SUBCLASS_MULTIMEDIA_TELEPHONY, },
|
|
{ "miscellaneous", PCI_SUBCLASS_MULTIMEDIA_MISC, },
|
|
{ 0 },
|
|
};
|
|
|
|
const struct pci_class pci_subclass_memory[] = {
|
|
{ "RAM", PCI_SUBCLASS_MEMORY_RAM, },
|
|
{ "flash", PCI_SUBCLASS_MEMORY_FLASH, },
|
|
{ "miscellaneous", PCI_SUBCLASS_MEMORY_MISC, },
|
|
{ 0 },
|
|
};
|
|
|
|
const struct pci_class pci_subclass_bridge[] = {
|
|
{ "host", PCI_SUBCLASS_BRIDGE_HOST, },
|
|
{ "ISA", PCI_SUBCLASS_BRIDGE_ISA, },
|
|
{ "EISA", PCI_SUBCLASS_BRIDGE_EISA, },
|
|
{ "MicroChannel", PCI_SUBCLASS_BRIDGE_MC, },
|
|
{ "PCI", PCI_SUBCLASS_BRIDGE_PCI, },
|
|
{ "PCMCIA", PCI_SUBCLASS_BRIDGE_PCMCIA, },
|
|
{ "NuBus", PCI_SUBCLASS_BRIDGE_NUBUS, },
|
|
{ "CardBus", PCI_SUBCLASS_BRIDGE_CARDBUS, },
|
|
{ "RACEway", PCI_SUBCLASS_BRIDGE_RACEWAY, },
|
|
{ "Semi-transparent PCI", PCI_SUBCLASS_BRIDGE_STPCI, },
|
|
{ "InfiniBand", PCI_SUBCLASS_BRIDGE_INFINIBAND, },
|
|
{ "miscellaneous", PCI_SUBCLASS_BRIDGE_MISC, },
|
|
{ 0 },
|
|
};
|
|
|
|
const struct pci_class pci_subclass_communications[] = {
|
|
{ "serial", PCI_SUBCLASS_COMMUNICATIONS_SERIAL, },
|
|
{ "parallel", PCI_SUBCLASS_COMMUNICATIONS_PARALLEL, },
|
|
{ "multi-port serial", PCI_SUBCLASS_COMMUNICATIONS_MPSERIAL, },
|
|
{ "modem", PCI_SUBCLASS_COMMUNICATIONS_MODEM, },
|
|
{ "GPIB", PCI_SUBCLASS_COMMUNICATIONS_GPIB, },
|
|
{ "smartcard", PCI_SUBCLASS_COMMUNICATIONS_SMARTCARD, },
|
|
{ "miscellaneous", PCI_SUBCLASS_COMMUNICATIONS_MISC, },
|
|
{ 0 },
|
|
};
|
|
|
|
const struct pci_class pci_subclass_system[] = {
|
|
{ "interrupt", PCI_SUBCLASS_SYSTEM_PIC, },
|
|
{ "8237 DMA", PCI_SUBCLASS_SYSTEM_DMA, },
|
|
{ "8254 timer", PCI_SUBCLASS_SYSTEM_TIMER, },
|
|
{ "RTC", PCI_SUBCLASS_SYSTEM_RTC, },
|
|
{ "PCI Hot-Plug", PCI_SUBCLASS_SYSTEM_RTC, },
|
|
{ "miscellaneous", PCI_SUBCLASS_SYSTEM_MISC, },
|
|
{ 0 },
|
|
};
|
|
|
|
const struct pci_class pci_subclass_input[] = {
|
|
{ "keyboard", PCI_SUBCLASS_INPUT_KEYBOARD, },
|
|
{ "digitizer", PCI_SUBCLASS_INPUT_DIGITIZER, },
|
|
{ "mouse", PCI_SUBCLASS_INPUT_MOUSE, },
|
|
{ "scanner", PCI_SUBCLASS_INPUT_SCANNER, },
|
|
{ "game port", PCI_SUBCLASS_INPUT_GAMEPORT, },
|
|
{ "miscellaneous", PCI_SUBCLASS_INPUT_MISC, },
|
|
{ 0 },
|
|
};
|
|
|
|
const struct pci_class pci_subclass_dock[] = {
|
|
{ "generic", PCI_SUBCLASS_DOCK_GENERIC, },
|
|
{ "miscellaneous", PCI_SUBCLASS_DOCK_MISC, },
|
|
{ 0 },
|
|
};
|
|
|
|
const struct pci_class pci_subclass_processor[] = {
|
|
{ "386", PCI_SUBCLASS_PROCESSOR_386, },
|
|
{ "486", PCI_SUBCLASS_PROCESSOR_486, },
|
|
{ "Pentium", PCI_SUBCLASS_PROCESSOR_PENTIUM, },
|
|
{ "Alpha", PCI_SUBCLASS_PROCESSOR_ALPHA, },
|
|
{ "PowerPC", PCI_SUBCLASS_PROCESSOR_POWERPC, },
|
|
{ "MIPS", PCI_SUBCLASS_PROCESSOR_MIPS, },
|
|
{ "Co-processor", PCI_SUBCLASS_PROCESSOR_COPROC, },
|
|
{ 0 },
|
|
};
|
|
|
|
const struct pci_class pci_subclass_serialbus[] = {
|
|
{ "Firewire", PCI_SUBCLASS_SERIALBUS_FIREWIRE, },
|
|
{ "ACCESS.bus", PCI_SUBCLASS_SERIALBUS_ACCESS, },
|
|
{ "SSA", PCI_SUBCLASS_SERIALBUS_SSA, },
|
|
{ "USB", PCI_SUBCLASS_SERIALBUS_USB, },
|
|
/* XXX Fiber Channel/_FIBRECHANNEL */
|
|
{ "Fiber Channel", PCI_SUBCLASS_SERIALBUS_FIBER, },
|
|
{ "SMBus", PCI_SUBCLASS_SERIALBUS_SMBUS, },
|
|
{ "InfiniBand", PCI_SUBCLASS_SERIALBUS_INFINIBAND, },
|
|
{ "IPMI", PCI_SUBCLASS_SERIALBUS_IPMI, },
|
|
{ "SERCOS", PCI_SUBCLASS_SERIALBUS_SERCOS, },
|
|
{ "CANbus", PCI_SUBCLASS_SERIALBUS_CANBUS, },
|
|
{ 0 },
|
|
};
|
|
|
|
const struct pci_class pci_subclass_wireless[] = {
|
|
{ "IrDA", PCI_SUBCLASS_WIRELESS_IRDA, },
|
|
{ "Consumer IR", PCI_SUBCLASS_WIRELESS_CONSUMERIR, },
|
|
{ "RF", PCI_SUBCLASS_WIRELESS_RF, },
|
|
{ "bluetooth", PCI_SUBCLASS_WIRELESS_BLUETOOTH, },
|
|
{ "broadband", PCI_SUBCLASS_WIRELESS_BROADBAND, },
|
|
{ "802.11a (5 GHz)", PCI_SUBCLASS_WIRELESS_802_11A, },
|
|
{ "802.11b (2.4 GHz)", PCI_SUBCLASS_WIRELESS_802_11B, },
|
|
{ "miscellaneous", PCI_SUBCLASS_WIRELESS_MISC, },
|
|
{ 0 },
|
|
};
|
|
|
|
const struct pci_class pci_subclass_i2o[] = {
|
|
{ "standard", PCI_SUBCLASS_I2O_STANDARD, },
|
|
{ 0 },
|
|
};
|
|
|
|
const struct pci_class pci_subclass_satcom[] = {
|
|
{ "TV", PCI_SUBCLASS_SATCOM_TV, },
|
|
{ "audio", PCI_SUBCLASS_SATCOM_AUDIO, },
|
|
{ "voice", PCI_SUBCLASS_SATCOM_VOICE, },
|
|
{ "data", PCI_SUBCLASS_SATCOM_DATA, },
|
|
{ 0 },
|
|
};
|
|
|
|
const struct pci_class pci_subclass_crypto[] = {
|
|
{ "network/computing", PCI_SUBCLASS_CRYPTO_NETCOMP, },
|
|
{ "entertainment", PCI_SUBCLASS_CRYPTO_ENTERTAINMENT, },
|
|
{ "miscellaneous", PCI_SUBCLASS_CRYPTO_MISC, },
|
|
{ 0 },
|
|
};
|
|
|
|
const struct pci_class pci_subclass_dasp[] = {
|
|
{ "DPIO", PCI_SUBCLASS_DASP_DPIO, },
|
|
{ "Time and Frequency", PCI_SUBCLASS_DASP_TIMEFREQ, },
|
|
{ "synchronization", PCI_SUBCLASS_DASP_SYNC, },
|
|
{ "management", PCI_SUBCLASS_DASP_MGMT, },
|
|
{ "miscellaneous", PCI_SUBCLASS_DASP_MISC, },
|
|
{ 0 },
|
|
};
|
|
|
|
const struct pci_class pci_class[] = {
|
|
{ "prehistoric", PCI_CLASS_PREHISTORIC,
|
|
pci_subclass_prehistoric, },
|
|
{ "mass storage", PCI_CLASS_MASS_STORAGE,
|
|
pci_subclass_mass_storage, },
|
|
{ "network", PCI_CLASS_NETWORK,
|
|
pci_subclass_network, },
|
|
{ "display", PCI_CLASS_DISPLAY,
|
|
pci_subclass_display, },
|
|
{ "multimedia", PCI_CLASS_MULTIMEDIA,
|
|
pci_subclass_multimedia, },
|
|
{ "memory", PCI_CLASS_MEMORY,
|
|
pci_subclass_memory, },
|
|
{ "bridge", PCI_CLASS_BRIDGE,
|
|
pci_subclass_bridge, },
|
|
{ "communications", PCI_CLASS_COMMUNICATIONS,
|
|
pci_subclass_communications, },
|
|
{ "system", PCI_CLASS_SYSTEM,
|
|
pci_subclass_system, },
|
|
{ "input", PCI_CLASS_INPUT,
|
|
pci_subclass_input, },
|
|
{ "dock", PCI_CLASS_DOCK,
|
|
pci_subclass_dock, },
|
|
{ "processor", PCI_CLASS_PROCESSOR,
|
|
pci_subclass_processor, },
|
|
{ "serial bus", PCI_CLASS_SERIALBUS,
|
|
pci_subclass_serialbus, },
|
|
{ "wireless", PCI_CLASS_WIRELESS,
|
|
pci_subclass_wireless, },
|
|
{ "I2O", PCI_CLASS_I2O,
|
|
pci_subclass_i2o, },
|
|
{ "satellite comm", PCI_CLASS_SATCOM,
|
|
pci_subclass_satcom, },
|
|
{ "crypto", PCI_CLASS_CRYPTO,
|
|
pci_subclass_crypto, },
|
|
{ "DASP", PCI_CLASS_DASP,
|
|
pci_subclass_dasp, },
|
|
{ "undefined", PCI_CLASS_UNDEFINED,
|
|
0, },
|
|
{ 0 },
|
|
};
|
|
|
|
#ifdef PCIVERBOSE
|
|
/*
|
|
* Descriptions of of known vendors and devices ("products").
|
|
*/
|
|
struct pci_vendor {
|
|
pci_vendor_id_t vendor;
|
|
const char *vendorname;
|
|
};
|
|
struct pci_product {
|
|
pci_vendor_id_t vendor;
|
|
pci_product_id_t product;
|
|
const char *productname;
|
|
};
|
|
|
|
#include <dev/pci/pcidevs_data.h>
|
|
#endif /* PCIVERBOSE */
|
|
|
|
const char *
|
|
pci_findvendor(pcireg_t id_reg)
|
|
{
|
|
#ifdef PCIVERBOSE
|
|
pci_vendor_id_t vendor = PCI_VENDOR(id_reg);
|
|
int n;
|
|
|
|
for (n = 0; n < pci_nvendors; n++)
|
|
if (pci_vendors[n].vendor == vendor)
|
|
return (pci_vendors[n].vendorname);
|
|
#endif
|
|
return (NULL);
|
|
}
|
|
|
|
const char *
|
|
pci_findproduct(pcireg_t id_reg)
|
|
{
|
|
#ifdef PCIVERBOSE
|
|
pci_vendor_id_t vendor = PCI_VENDOR(id_reg);
|
|
pci_product_id_t product = PCI_PRODUCT(id_reg);
|
|
int n;
|
|
|
|
for (n = 0; n < pci_nproducts; n++)
|
|
if (pci_products[n].vendor == vendor &&
|
|
pci_products[n].product == product)
|
|
return (pci_products[n].productname);
|
|
#endif
|
|
return (NULL);
|
|
}
|
|
|
|
void
|
|
pci_devinfo(pcireg_t id_reg, pcireg_t class_reg, int showclass, char *cp,
|
|
size_t l)
|
|
{
|
|
pci_vendor_id_t vendor;
|
|
pci_product_id_t product;
|
|
pci_class_t class;
|
|
pci_subclass_t subclass;
|
|
pci_interface_t interface;
|
|
pci_revision_t revision;
|
|
const char *vendor_namep, *product_namep;
|
|
const struct pci_class *classp, *subclassp;
|
|
#ifdef PCIVERBOSE
|
|
const char *unmatched = "unknown ";
|
|
#else
|
|
const char *unmatched = "";
|
|
#endif
|
|
char *ep;
|
|
|
|
ep = cp + l;
|
|
|
|
vendor = PCI_VENDOR(id_reg);
|
|
product = PCI_PRODUCT(id_reg);
|
|
|
|
class = PCI_CLASS(class_reg);
|
|
subclass = PCI_SUBCLASS(class_reg);
|
|
interface = PCI_INTERFACE(class_reg);
|
|
revision = PCI_REVISION(class_reg);
|
|
|
|
vendor_namep = pci_findvendor(id_reg);
|
|
product_namep = pci_findproduct(id_reg);
|
|
|
|
classp = pci_class;
|
|
while (classp->name != NULL) {
|
|
if (class == classp->val)
|
|
break;
|
|
classp++;
|
|
}
|
|
|
|
subclassp = (classp->name != NULL) ? classp->subclasses : NULL;
|
|
while (subclassp && subclassp->name != NULL) {
|
|
if (subclass == subclassp->val)
|
|
break;
|
|
subclassp++;
|
|
}
|
|
|
|
if (vendor_namep == NULL)
|
|
cp += snprintf(cp, ep - cp, "%svendor 0x%04x product 0x%04x",
|
|
unmatched, vendor, product);
|
|
else if (product_namep != NULL)
|
|
cp += snprintf(cp, ep - cp, "%s %s", vendor_namep,
|
|
product_namep);
|
|
else
|
|
cp += snprintf(cp, ep - cp, "%s product 0x%04x",
|
|
vendor_namep, product);
|
|
if (showclass) {
|
|
cp += snprintf(cp, ep - cp, " (");
|
|
if (classp->name == NULL)
|
|
cp += snprintf(cp, ep - cp,
|
|
"class 0x%02x, subclass 0x%02x", class, subclass);
|
|
else {
|
|
if (subclassp == NULL || subclassp->name == NULL)
|
|
cp += snprintf(cp, ep - cp,
|
|
"%s subclass 0x%02x",
|
|
classp->name, subclass);
|
|
else
|
|
cp += snprintf(cp, ep - cp, "%s %s",
|
|
subclassp->name, classp->name);
|
|
}
|
|
if (interface != 0)
|
|
cp += snprintf(cp, ep - cp, ", interface 0x%02x",
|
|
interface);
|
|
if (revision != 0)
|
|
cp += snprintf(cp, ep - cp, ", revision 0x%02x",
|
|
revision);
|
|
cp += snprintf(cp, ep - cp, ")");
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Print out most of the PCI configuration registers. Typically used
|
|
* in a device attach routine like this:
|
|
*
|
|
* #ifdef MYDEV_DEBUG
|
|
* printf("%s: ", sc->sc_dev.dv_xname);
|
|
* pci_conf_print(pa->pa_pc, pa->pa_tag, NULL);
|
|
* #endif
|
|
*/
|
|
|
|
#define i2o(i) ((i) * 4)
|
|
#define o2i(o) ((o) / 4)
|
|
#define onoff(str, bit) \
|
|
printf(" %s: %s\n", (str), (rval & (bit)) ? "on" : "off");
|
|
|
|
static void
|
|
pci_conf_print_common(
|
|
#ifdef _KERNEL
|
|
pci_chipset_tag_t pc, pcitag_t tag,
|
|
#endif
|
|
const pcireg_t *regs)
|
|
{
|
|
const char *name;
|
|
const struct pci_class *classp, *subclassp;
|
|
pcireg_t rval;
|
|
|
|
rval = regs[o2i(PCI_ID_REG)];
|
|
name = pci_findvendor(rval);
|
|
if (name)
|
|
printf(" Vendor Name: %s (0x%04x)\n", name,
|
|
PCI_VENDOR(rval));
|
|
else
|
|
printf(" Vendor ID: 0x%04x\n", PCI_VENDOR(rval));
|
|
name = pci_findproduct(rval);
|
|
if (name)
|
|
printf(" Device Name: %s (0x%04x)\n", name,
|
|
PCI_PRODUCT(rval));
|
|
else
|
|
printf(" Device ID: 0x%04x\n", PCI_PRODUCT(rval));
|
|
|
|
rval = regs[o2i(PCI_COMMAND_STATUS_REG)];
|
|
|
|
printf(" Command register: 0x%04x\n", rval & 0xffff);
|
|
onoff("I/O space accesses", PCI_COMMAND_IO_ENABLE);
|
|
onoff("Memory space accesses", PCI_COMMAND_MEM_ENABLE);
|
|
onoff("Bus mastering", PCI_COMMAND_MASTER_ENABLE);
|
|
onoff("Special cycles", PCI_COMMAND_SPECIAL_ENABLE);
|
|
onoff("MWI transactions", PCI_COMMAND_INVALIDATE_ENABLE);
|
|
onoff("Palette snooping", PCI_COMMAND_PALETTE_ENABLE);
|
|
onoff("Parity error checking", PCI_COMMAND_PARITY_ENABLE);
|
|
onoff("Address/data stepping", PCI_COMMAND_STEPPING_ENABLE);
|
|
onoff("System error (SERR)", PCI_COMMAND_SERR_ENABLE);
|
|
onoff("Fast back-to-back transactions", PCI_COMMAND_BACKTOBACK_ENABLE);
|
|
|
|
printf(" Status register: 0x%04x\n", (rval >> 16) & 0xffff);
|
|
onoff("Capability List support", PCI_STATUS_CAPLIST_SUPPORT);
|
|
onoff("66 MHz capable", PCI_STATUS_66MHZ_SUPPORT);
|
|
onoff("User Definable Features (UDF) support", PCI_STATUS_UDF_SUPPORT);
|
|
onoff("Fast back-to-back capable", PCI_STATUS_BACKTOBACK_SUPPORT);
|
|
onoff("Data parity error detected", PCI_STATUS_PARITY_ERROR);
|
|
|
|
printf(" DEVSEL timing: ");
|
|
switch (rval & PCI_STATUS_DEVSEL_MASK) {
|
|
case PCI_STATUS_DEVSEL_FAST:
|
|
printf("fast");
|
|
break;
|
|
case PCI_STATUS_DEVSEL_MEDIUM:
|
|
printf("medium");
|
|
break;
|
|
case PCI_STATUS_DEVSEL_SLOW:
|
|
printf("slow");
|
|
break;
|
|
default:
|
|
printf("unknown/reserved"); /* XXX */
|
|
break;
|
|
}
|
|
printf(" (0x%x)\n", (rval & PCI_STATUS_DEVSEL_MASK) >> 25);
|
|
|
|
onoff("Slave signaled Target Abort", PCI_STATUS_TARGET_TARGET_ABORT);
|
|
onoff("Master received Target Abort", PCI_STATUS_MASTER_TARGET_ABORT);
|
|
onoff("Master received Master Abort", PCI_STATUS_MASTER_ABORT);
|
|
onoff("Asserted System Error (SERR)", PCI_STATUS_SPECIAL_ERROR);
|
|
onoff("Parity error detected", PCI_STATUS_PARITY_DETECT);
|
|
|
|
rval = regs[o2i(PCI_CLASS_REG)];
|
|
for (classp = pci_class; classp->name != NULL; classp++) {
|
|
if (PCI_CLASS(rval) == classp->val)
|
|
break;
|
|
}
|
|
subclassp = (classp->name != NULL) ? classp->subclasses : NULL;
|
|
while (subclassp && subclassp->name != NULL) {
|
|
if (PCI_SUBCLASS(rval) == subclassp->val)
|
|
break;
|
|
subclassp++;
|
|
}
|
|
if (classp->name != NULL) {
|
|
printf(" Class Name: %s (0x%02x)\n", classp->name,
|
|
PCI_CLASS(rval));
|
|
if (subclassp != NULL && subclassp->name != NULL)
|
|
printf(" Subclass Name: %s (0x%02x)\n",
|
|
subclassp->name, PCI_SUBCLASS(rval));
|
|
else
|
|
printf(" Subclass ID: 0x%02x\n", PCI_SUBCLASS(rval));
|
|
} else {
|
|
printf(" Class ID: 0x%02x\n", PCI_CLASS(rval));
|
|
printf(" Subclass ID: 0x%02x\n", PCI_SUBCLASS(rval));
|
|
}
|
|
printf(" Interface: 0x%02x\n", PCI_INTERFACE(rval));
|
|
printf(" Revision ID: 0x%02x\n", PCI_REVISION(rval));
|
|
|
|
rval = regs[o2i(PCI_BHLC_REG)];
|
|
printf(" BIST: 0x%02x\n", PCI_BIST(rval));
|
|
printf(" Header Type: 0x%02x%s (0x%02x)\n", PCI_HDRTYPE_TYPE(rval),
|
|
PCI_HDRTYPE_MULTIFN(rval) ? "+multifunction" : "",
|
|
PCI_HDRTYPE(rval));
|
|
printf(" Latency Timer: 0x%02x\n", PCI_LATTIMER(rval));
|
|
printf(" Cache Line Size: 0x%02x\n", PCI_CACHELINE(rval));
|
|
}
|
|
|
|
static int
|
|
pci_conf_print_bar(
|
|
#ifdef _KERNEL
|
|
pci_chipset_tag_t pc, pcitag_t tag,
|
|
#endif
|
|
const pcireg_t *regs, int reg, const char *name
|
|
#ifdef _KERNEL
|
|
, int sizebar
|
|
#endif
|
|
)
|
|
{
|
|
int width;
|
|
pcireg_t rval, rval64h;
|
|
#ifdef _KERNEL
|
|
int s;
|
|
pcireg_t mask, mask64h;
|
|
#endif
|
|
|
|
width = 4;
|
|
|
|
/*
|
|
* Section 6.2.5.1, `Address Maps', tells us that:
|
|
*
|
|
* 1) The builtin software should have already mapped the
|
|
* device in a reasonable way.
|
|
*
|
|
* 2) A device which wants 2^n bytes of memory will hardwire
|
|
* the bottom n bits of the address to 0. As recommended,
|
|
* we write all 1s and see what we get back.
|
|
*/
|
|
|
|
rval = regs[o2i(reg)];
|
|
if (PCI_MAPREG_TYPE(rval) == PCI_MAPREG_TYPE_MEM &&
|
|
PCI_MAPREG_MEM_TYPE(rval) == PCI_MAPREG_MEM_TYPE_64BIT) {
|
|
rval64h = regs[o2i(reg + 4)];
|
|
width = 8;
|
|
} else
|
|
rval64h = 0;
|
|
|
|
#ifdef _KERNEL
|
|
/* XXX don't size unknown memory type? */
|
|
if (rval != 0 && sizebar) {
|
|
/*
|
|
* The following sequence seems to make some devices
|
|
* (e.g. host bus bridges, which don't normally
|
|
* have their space mapped) very unhappy, to
|
|
* the point of crashing the system.
|
|
*
|
|
* Therefore, if the mapping register is zero to
|
|
* start out with, don't bother trying.
|
|
*/
|
|
s = splhigh();
|
|
pci_conf_write(pc, tag, reg, 0xffffffff);
|
|
mask = pci_conf_read(pc, tag, reg);
|
|
pci_conf_write(pc, tag, reg, rval);
|
|
if (PCI_MAPREG_TYPE(rval) == PCI_MAPREG_TYPE_MEM &&
|
|
PCI_MAPREG_MEM_TYPE(rval) == PCI_MAPREG_MEM_TYPE_64BIT) {
|
|
pci_conf_write(pc, tag, reg + 4, 0xffffffff);
|
|
mask64h = pci_conf_read(pc, tag, reg + 4);
|
|
pci_conf_write(pc, tag, reg + 4, rval64h);
|
|
} else
|
|
mask64h = 0;
|
|
splx(s);
|
|
} else
|
|
mask = mask64h = 0;
|
|
#endif /* _KERNEL */
|
|
|
|
printf(" Base address register at 0x%02x", reg);
|
|
if (name)
|
|
printf(" (%s)", name);
|
|
printf("\n ");
|
|
if (rval == 0) {
|
|
printf("not implemented(?)\n");
|
|
return width;
|
|
}
|
|
printf("type: ");
|
|
if (PCI_MAPREG_TYPE(rval) == PCI_MAPREG_TYPE_MEM) {
|
|
const char *type, *prefetch;
|
|
|
|
switch (PCI_MAPREG_MEM_TYPE(rval)) {
|
|
case PCI_MAPREG_MEM_TYPE_32BIT:
|
|
type = "32-bit";
|
|
break;
|
|
case PCI_MAPREG_MEM_TYPE_32BIT_1M:
|
|
type = "32-bit-1M";
|
|
break;
|
|
case PCI_MAPREG_MEM_TYPE_64BIT:
|
|
type = "64-bit";
|
|
break;
|
|
default:
|
|
type = "unknown (XXX)";
|
|
break;
|
|
}
|
|
if (PCI_MAPREG_MEM_PREFETCHABLE(rval))
|
|
prefetch = "";
|
|
else
|
|
prefetch = "non";
|
|
printf("%s %sprefetchable memory\n", type, prefetch);
|
|
switch (PCI_MAPREG_MEM_TYPE(rval)) {
|
|
case PCI_MAPREG_MEM_TYPE_64BIT:
|
|
printf(" base: 0x%016llx, ",
|
|
PCI_MAPREG_MEM64_ADDR(
|
|
((((long long) rval64h) << 32) | rval)));
|
|
#ifdef _KERNEL
|
|
if (sizebar)
|
|
printf("size: 0x%016llx",
|
|
PCI_MAPREG_MEM64_SIZE(
|
|
((((long long) mask64h) << 32) | mask)));
|
|
else
|
|
#endif /* _KERNEL */
|
|
printf("not sized");
|
|
printf("\n");
|
|
break;
|
|
case PCI_MAPREG_MEM_TYPE_32BIT:
|
|
case PCI_MAPREG_MEM_TYPE_32BIT_1M:
|
|
default:
|
|
printf(" base: 0x%08x, ",
|
|
PCI_MAPREG_MEM_ADDR(rval));
|
|
#ifdef _KERNEL
|
|
if (sizebar)
|
|
printf("size: 0x%08x",
|
|
PCI_MAPREG_MEM_SIZE(mask));
|
|
else
|
|
#endif /* _KERNEL */
|
|
printf("not sized");
|
|
printf("\n");
|
|
break;
|
|
}
|
|
} else {
|
|
#ifdef _KERNEL
|
|
if (sizebar)
|
|
printf("%d-bit ", mask & ~0x0000ffff ? 32 : 16);
|
|
#endif /* _KERNEL */
|
|
printf("i/o\n");
|
|
printf(" base: 0x%08x, ", PCI_MAPREG_IO_ADDR(rval));
|
|
#ifdef _KERNEL
|
|
if (sizebar)
|
|
printf("size: 0x%08x", PCI_MAPREG_IO_SIZE(mask));
|
|
else
|
|
#endif /* _KERNEL */
|
|
printf("not sized");
|
|
printf("\n");
|
|
}
|
|
|
|
return width;
|
|
}
|
|
|
|
static void
|
|
pci_conf_print_regs(const pcireg_t *regs, int first, int pastlast)
|
|
{
|
|
int off, needaddr, neednl;
|
|
|
|
needaddr = 1;
|
|
neednl = 0;
|
|
for (off = first; off < pastlast; off += 4) {
|
|
if ((off % 16) == 0 || needaddr) {
|
|
printf(" 0x%02x:", off);
|
|
needaddr = 0;
|
|
}
|
|
printf(" 0x%08x", regs[o2i(off)]);
|
|
neednl = 1;
|
|
if ((off % 16) == 12) {
|
|
printf("\n");
|
|
neednl = 0;
|
|
}
|
|
}
|
|
if (neednl)
|
|
printf("\n");
|
|
}
|
|
|
|
static void
|
|
pci_conf_print_type0(
|
|
#ifdef _KERNEL
|
|
pci_chipset_tag_t pc, pcitag_t tag,
|
|
#endif
|
|
const pcireg_t *regs
|
|
#ifdef _KERNEL
|
|
, int sizebars
|
|
#endif
|
|
)
|
|
{
|
|
int off, width;
|
|
pcireg_t rval;
|
|
|
|
for (off = PCI_MAPREG_START; off < PCI_MAPREG_END; off += width) {
|
|
#ifdef _KERNEL
|
|
width = pci_conf_print_bar(pc, tag, regs, off, NULL, sizebars);
|
|
#else
|
|
width = pci_conf_print_bar(regs, off, NULL);
|
|
#endif
|
|
}
|
|
|
|
printf(" Cardbus CIS Pointer: 0x%08x\n", regs[o2i(0x28)]);
|
|
|
|
rval = regs[o2i(PCI_SUBSYS_ID_REG)];
|
|
printf(" Subsystem vendor ID: 0x%04x\n", PCI_VENDOR(rval));
|
|
printf(" Subsystem ID: 0x%04x\n", PCI_PRODUCT(rval));
|
|
|
|
/* XXX */
|
|
printf(" Expansion ROM Base Address: 0x%08x\n", regs[o2i(0x30)]);
|
|
|
|
if (regs[o2i(PCI_COMMAND_STATUS_REG)] & PCI_STATUS_CAPLIST_SUPPORT)
|
|
printf(" Capability list pointer: 0x%02x\n",
|
|
PCI_CAPLIST_PTR(regs[o2i(PCI_CAPLISTPTR_REG)]));
|
|
else
|
|
printf(" Reserved @ 0x34: 0x%08x\n", regs[o2i(0x34)]);
|
|
|
|
printf(" Reserved @ 0x38: 0x%08x\n", regs[o2i(0x38)]);
|
|
|
|
rval = regs[o2i(PCI_INTERRUPT_REG)];
|
|
printf(" Maximum Latency: 0x%02x\n", (rval >> 24) & 0xff);
|
|
printf(" Minimum Grant: 0x%02x\n", (rval >> 16) & 0xff);
|
|
printf(" Interrupt pin: 0x%02x ", PCI_INTERRUPT_PIN(rval));
|
|
switch (PCI_INTERRUPT_PIN(rval)) {
|
|
case PCI_INTERRUPT_PIN_NONE:
|
|
printf("(none)");
|
|
break;
|
|
case PCI_INTERRUPT_PIN_A:
|
|
printf("(pin A)");
|
|
break;
|
|
case PCI_INTERRUPT_PIN_B:
|
|
printf("(pin B)");
|
|
break;
|
|
case PCI_INTERRUPT_PIN_C:
|
|
printf("(pin C)");
|
|
break;
|
|
case PCI_INTERRUPT_PIN_D:
|
|
printf("(pin D)");
|
|
break;
|
|
default:
|
|
printf("(? ? ?)");
|
|
break;
|
|
}
|
|
printf("\n");
|
|
printf(" Interrupt line: 0x%02x\n", PCI_INTERRUPT_LINE(rval));
|
|
}
|
|
|
|
static void
|
|
pci_conf_print_caplist(
|
|
#ifdef _KERNEL
|
|
pci_chipset_tag_t pc, pcitag_t tag,
|
|
#endif
|
|
const pcireg_t *regs, int capoff)
|
|
{
|
|
int off;
|
|
pcireg_t rval;
|
|
|
|
for (off = PCI_CAPLIST_PTR(regs[o2i(capoff)]);
|
|
off != 0;
|
|
off = PCI_CAPLIST_NEXT(regs[o2i(off)])) {
|
|
rval = regs[o2i(off)];
|
|
printf(" Capability register at 0x%02x\n", off);
|
|
|
|
printf(" type: 0x%02x (", PCI_CAPLIST_CAP(rval));
|
|
switch (PCI_CAPLIST_CAP(rval)) {
|
|
case PCI_CAP_RESERVED0:
|
|
printf("reserved");
|
|
break;
|
|
case PCI_CAP_PWRMGMT:
|
|
printf("Power Management, rev. %d.0",
|
|
(rval >> 0) & 0x07); /* XXX not clear */
|
|
break;
|
|
case PCI_CAP_AGP:
|
|
printf("AGP, rev. %d.%d",
|
|
PCI_CAP_AGP_MAJOR(rval),
|
|
PCI_CAP_AGP_MINOR(rval));
|
|
break;
|
|
case PCI_CAP_VPD:
|
|
printf("VPD");
|
|
break;
|
|
case PCI_CAP_SLOTID:
|
|
printf("SlotID");
|
|
break;
|
|
case PCI_CAP_MSI:
|
|
printf("MSI");
|
|
break;
|
|
case PCI_CAP_CPCI_HOTSWAP:
|
|
printf("CompactPCI Hot-swapping");
|
|
break;
|
|
case PCI_CAP_PCIX:
|
|
printf("PCI-X");
|
|
break;
|
|
case PCI_CAP_LDT:
|
|
printf("LDT");
|
|
break;
|
|
case PCI_CAP_VENDSPEC:
|
|
printf("Vendor-specific");
|
|
break;
|
|
case PCI_CAP_DEBUGPORT:
|
|
printf("Debug Port");
|
|
break;
|
|
case PCI_CAP_CPCI_RSRCCTL:
|
|
printf("CompactPCI Resource Control");
|
|
break;
|
|
case PCI_CAP_HOTPLUG:
|
|
printf("Hot-Plug");
|
|
break;
|
|
case PCI_CAP_AGP8:
|
|
printf("AGP 8x");
|
|
break;
|
|
case PCI_CAP_SECURE:
|
|
printf("Secure Device");
|
|
break;
|
|
case PCI_CAP_PCIEXPRESS:
|
|
printf("PCI Express");
|
|
break;
|
|
case PCI_CAP_MSIX:
|
|
printf("MSI-X");
|
|
break;
|
|
default:
|
|
printf("unknown");
|
|
}
|
|
printf(")\n");
|
|
}
|
|
}
|
|
|
|
static void
|
|
pci_conf_print_type1(
|
|
#ifdef _KERNEL
|
|
pci_chipset_tag_t pc, pcitag_t tag,
|
|
#endif
|
|
const pcireg_t *regs
|
|
#ifdef _KERNEL
|
|
, int sizebars
|
|
#endif
|
|
)
|
|
{
|
|
int off, width;
|
|
pcireg_t rval;
|
|
|
|
/*
|
|
* XXX these need to be printed in more detail, need to be
|
|
* XXX checked against specs/docs, etc.
|
|
*
|
|
* This layout was cribbed from the TI PCI2030 PCI-to-PCI
|
|
* Bridge chip documentation, and may not be correct with
|
|
* respect to various standards. (XXX)
|
|
*/
|
|
|
|
for (off = 0x10; off < 0x18; off += width) {
|
|
#ifdef _KERNEL
|
|
width = pci_conf_print_bar(pc, tag, regs, off, NULL, sizebars);
|
|
#else
|
|
width = pci_conf_print_bar(regs, off, NULL);
|
|
#endif
|
|
}
|
|
|
|
printf(" Primary bus number: 0x%02x\n",
|
|
(regs[o2i(0x18)] >> 0) & 0xff);
|
|
printf(" Secondary bus number: 0x%02x\n",
|
|
(regs[o2i(0x18)] >> 8) & 0xff);
|
|
printf(" Subordinate bus number: 0x%02x\n",
|
|
(regs[o2i(0x18)] >> 16) & 0xff);
|
|
printf(" Secondary bus latency timer: 0x%02x\n",
|
|
(regs[o2i(0x18)] >> 24) & 0xff);
|
|
|
|
rval = (regs[o2i(0x1c)] >> 16) & 0xffff;
|
|
printf(" Secondary status register: 0x%04x\n", rval); /* XXX bits */
|
|
onoff("66 MHz capable", 0x0020);
|
|
onoff("User Definable Features (UDF) support", 0x0040);
|
|
onoff("Fast back-to-back capable", 0x0080);
|
|
onoff("Data parity error detected", 0x0100);
|
|
|
|
printf(" DEVSEL timing: ");
|
|
switch (rval & 0x0600) {
|
|
case 0x0000:
|
|
printf("fast");
|
|
break;
|
|
case 0x0200:
|
|
printf("medium");
|
|
break;
|
|
case 0x0400:
|
|
printf("slow");
|
|
break;
|
|
default:
|
|
printf("unknown/reserved"); /* XXX */
|
|
break;
|
|
}
|
|
printf(" (0x%x)\n", (rval & 0x0600) >> 9);
|
|
|
|
onoff("Signaled Target Abort", 0x0800);
|
|
onoff("Received Target Abort", 0x1000);
|
|
onoff("Received Master Abort", 0x2000);
|
|
onoff("System Error", 0x4000);
|
|
onoff("Parity Error", 0x8000);
|
|
|
|
/* XXX Print more prettily */
|
|
printf(" I/O region:\n");
|
|
printf(" base register: 0x%02x\n", (regs[o2i(0x1c)] >> 0) & 0xff);
|
|
printf(" limit register: 0x%02x\n", (regs[o2i(0x1c)] >> 8) & 0xff);
|
|
printf(" base upper 16 bits register: 0x%04x\n",
|
|
(regs[o2i(0x30)] >> 0) & 0xffff);
|
|
printf(" limit upper 16 bits register: 0x%04x\n",
|
|
(regs[o2i(0x30)] >> 16) & 0xffff);
|
|
|
|
/* XXX Print more prettily */
|
|
printf(" Memory region:\n");
|
|
printf(" base register: 0x%04x\n",
|
|
(regs[o2i(0x20)] >> 0) & 0xffff);
|
|
printf(" limit register: 0x%04x\n",
|
|
(regs[o2i(0x20)] >> 16) & 0xffff);
|
|
|
|
/* XXX Print more prettily */
|
|
printf(" Prefetchable memory region:\n");
|
|
printf(" base register: 0x%04x\n",
|
|
(regs[o2i(0x24)] >> 0) & 0xffff);
|
|
printf(" limit register: 0x%04x\n",
|
|
(regs[o2i(0x24)] >> 16) & 0xffff);
|
|
printf(" base upper 32 bits register: 0x%08x\n", regs[o2i(0x28)]);
|
|
printf(" limit upper 32 bits register: 0x%08x\n", regs[o2i(0x2c)]);
|
|
|
|
if (regs[o2i(PCI_COMMAND_STATUS_REG)] & PCI_STATUS_CAPLIST_SUPPORT)
|
|
printf(" Capability list pointer: 0x%02x\n",
|
|
PCI_CAPLIST_PTR(regs[o2i(PCI_CAPLISTPTR_REG)]));
|
|
else
|
|
printf(" Reserved @ 0x34: 0x%08x\n", regs[o2i(0x34)]);
|
|
|
|
/* XXX */
|
|
printf(" Expansion ROM Base Address: 0x%08x\n", regs[o2i(0x38)]);
|
|
|
|
printf(" Interrupt line: 0x%02x\n",
|
|
(regs[o2i(0x3c)] >> 0) & 0xff);
|
|
printf(" Interrupt pin: 0x%02x ",
|
|
(regs[o2i(0x3c)] >> 8) & 0xff);
|
|
switch ((regs[o2i(0x3c)] >> 8) & 0xff) {
|
|
case PCI_INTERRUPT_PIN_NONE:
|
|
printf("(none)");
|
|
break;
|
|
case PCI_INTERRUPT_PIN_A:
|
|
printf("(pin A)");
|
|
break;
|
|
case PCI_INTERRUPT_PIN_B:
|
|
printf("(pin B)");
|
|
break;
|
|
case PCI_INTERRUPT_PIN_C:
|
|
printf("(pin C)");
|
|
break;
|
|
case PCI_INTERRUPT_PIN_D:
|
|
printf("(pin D)");
|
|
break;
|
|
default:
|
|
printf("(? ? ?)");
|
|
break;
|
|
}
|
|
printf("\n");
|
|
rval = (regs[o2i(0x3c)] >> 16) & 0xffff;
|
|
printf(" Bridge control register: 0x%04x\n", rval); /* XXX bits */
|
|
onoff("Parity error response", 0x0001);
|
|
onoff("Secondary SERR forwarding", 0x0002);
|
|
onoff("ISA enable", 0x0004);
|
|
onoff("VGA enable", 0x0008);
|
|
onoff("Master abort reporting", 0x0020);
|
|
onoff("Secondary bus reset", 0x0040);
|
|
onoff("Fast back-to-back capable", 0x0080);
|
|
}
|
|
|
|
static void
|
|
pci_conf_print_type2(
|
|
#ifdef _KERNEL
|
|
pci_chipset_tag_t pc, pcitag_t tag,
|
|
#endif
|
|
const pcireg_t *regs
|
|
#ifdef _KERNEL
|
|
, int sizebars
|
|
#endif
|
|
)
|
|
{
|
|
pcireg_t rval;
|
|
|
|
/*
|
|
* XXX these need to be printed in more detail, need to be
|
|
* XXX checked against specs/docs, etc.
|
|
*
|
|
* This layout was cribbed from the TI PCI1130 PCI-to-CardBus
|
|
* controller chip documentation, and may not be correct with
|
|
* respect to various standards. (XXX)
|
|
*/
|
|
|
|
#ifdef _KERNEL
|
|
pci_conf_print_bar(pc, tag, regs, 0x10,
|
|
"CardBus socket/ExCA registers", sizebars);
|
|
#else
|
|
pci_conf_print_bar(regs, 0x10, "CardBus socket/ExCA registers");
|
|
#endif
|
|
|
|
if (regs[o2i(PCI_COMMAND_STATUS_REG)] & PCI_STATUS_CAPLIST_SUPPORT)
|
|
printf(" Capability list pointer: 0x%02x\n",
|
|
PCI_CAPLIST_PTR(regs[o2i(PCI_CARDBUS_CAPLISTPTR_REG)]));
|
|
else
|
|
printf(" Reserved @ 0x14: 0x%04x\n",
|
|
(regs[o2i(0x14)] >> 0) & 0xffff);
|
|
rval = (regs[o2i(0x14)] >> 16) & 0xffff;
|
|
printf(" Secondary status register: 0x%04x\n", rval);
|
|
onoff("66 MHz capable", 0x0020);
|
|
onoff("User Definable Features (UDF) support", 0x0040);
|
|
onoff("Fast back-to-back capable", 0x0080);
|
|
onoff("Data parity error detection", 0x0100);
|
|
|
|
printf(" DEVSEL timing: ");
|
|
switch (rval & 0x0600) {
|
|
case 0x0000:
|
|
printf("fast");
|
|
break;
|
|
case 0x0200:
|
|
printf("medium");
|
|
break;
|
|
case 0x0400:
|
|
printf("slow");
|
|
break;
|
|
default:
|
|
printf("unknown/reserved"); /* XXX */
|
|
break;
|
|
}
|
|
printf(" (0x%x)\n", (rval & 0x0600) >> 9);
|
|
onoff("PCI target aborts terminate CardBus bus master transactions",
|
|
0x0800);
|
|
onoff("CardBus target aborts terminate PCI bus master transactions",
|
|
0x1000);
|
|
onoff("Bus initiator aborts terminate initiator transactions",
|
|
0x2000);
|
|
onoff("System error", 0x4000);
|
|
onoff("Parity error", 0x8000);
|
|
|
|
printf(" PCI bus number: 0x%02x\n",
|
|
(regs[o2i(0x18)] >> 0) & 0xff);
|
|
printf(" CardBus bus number: 0x%02x\n",
|
|
(regs[o2i(0x18)] >> 8) & 0xff);
|
|
printf(" Subordinate bus number: 0x%02x\n",
|
|
(regs[o2i(0x18)] >> 16) & 0xff);
|
|
printf(" CardBus latency timer: 0x%02x\n",
|
|
(regs[o2i(0x18)] >> 24) & 0xff);
|
|
|
|
/* XXX Print more prettily */
|
|
printf(" CardBus memory region 0:\n");
|
|
printf(" base register: 0x%08x\n", regs[o2i(0x1c)]);
|
|
printf(" limit register: 0x%08x\n", regs[o2i(0x20)]);
|
|
printf(" CardBus memory region 1:\n");
|
|
printf(" base register: 0x%08x\n", regs[o2i(0x24)]);
|
|
printf(" limit register: 0x%08x\n", regs[o2i(0x28)]);
|
|
printf(" CardBus I/O region 0:\n");
|
|
printf(" base register: 0x%08x\n", regs[o2i(0x2c)]);
|
|
printf(" limit register: 0x%08x\n", regs[o2i(0x30)]);
|
|
printf(" CardBus I/O region 1:\n");
|
|
printf(" base register: 0x%08x\n", regs[o2i(0x34)]);
|
|
printf(" limit register: 0x%08x\n", regs[o2i(0x38)]);
|
|
|
|
printf(" Interrupt line: 0x%02x\n",
|
|
(regs[o2i(0x3c)] >> 0) & 0xff);
|
|
printf(" Interrupt pin: 0x%02x ",
|
|
(regs[o2i(0x3c)] >> 8) & 0xff);
|
|
switch ((regs[o2i(0x3c)] >> 8) & 0xff) {
|
|
case PCI_INTERRUPT_PIN_NONE:
|
|
printf("(none)");
|
|
break;
|
|
case PCI_INTERRUPT_PIN_A:
|
|
printf("(pin A)");
|
|
break;
|
|
case PCI_INTERRUPT_PIN_B:
|
|
printf("(pin B)");
|
|
break;
|
|
case PCI_INTERRUPT_PIN_C:
|
|
printf("(pin C)");
|
|
break;
|
|
case PCI_INTERRUPT_PIN_D:
|
|
printf("(pin D)");
|
|
break;
|
|
default:
|
|
printf("(? ? ?)");
|
|
break;
|
|
}
|
|
printf("\n");
|
|
rval = (regs[o2i(0x3c)] >> 16) & 0xffff;
|
|
printf(" Bridge control register: 0x%04x\n", rval);
|
|
onoff("Parity error response", 0x0001);
|
|
onoff("CardBus SERR forwarding", 0x0002);
|
|
onoff("ISA enable", 0x0004);
|
|
onoff("VGA enable", 0x0008);
|
|
onoff("CardBus master abort reporting", 0x0020);
|
|
onoff("CardBus reset", 0x0040);
|
|
onoff("Functional interrupts routed by ExCA registers", 0x0080);
|
|
onoff("Memory window 0 prefetchable", 0x0100);
|
|
onoff("Memory window 1 prefetchable", 0x0200);
|
|
onoff("Write posting enable", 0x0400);
|
|
|
|
rval = regs[o2i(0x40)];
|
|
printf(" Subsystem vendor ID: 0x%04x\n", PCI_VENDOR(rval));
|
|
printf(" Subsystem ID: 0x%04x\n", PCI_PRODUCT(rval));
|
|
|
|
#ifdef _KERNEL
|
|
pci_conf_print_bar(pc, tag, regs, 0x44, "legacy-mode registers",
|
|
sizebars);
|
|
#else
|
|
pci_conf_print_bar(regs, 0x44, "legacy-mode registers");
|
|
#endif
|
|
}
|
|
|
|
void
|
|
pci_conf_print(
|
|
#ifdef _KERNEL
|
|
pci_chipset_tag_t pc, pcitag_t tag,
|
|
void (*printfn)(pci_chipset_tag_t, pcitag_t, const pcireg_t *)
|
|
#else
|
|
int pcifd, u_int bus, u_int dev, u_int func
|
|
#endif
|
|
)
|
|
{
|
|
pcireg_t regs[o2i(256)];
|
|
int off, capoff, endoff, hdrtype;
|
|
const char *typename;
|
|
#ifdef _KERNEL
|
|
void (*typeprintfn)(pci_chipset_tag_t, pcitag_t, const pcireg_t *, int);
|
|
int sizebars;
|
|
#else
|
|
void (*typeprintfn)(const pcireg_t *);
|
|
#endif
|
|
|
|
printf("PCI configuration registers:\n");
|
|
|
|
for (off = 0; off < 256; off += 4) {
|
|
#ifdef _KERNEL
|
|
regs[o2i(off)] = pci_conf_read(pc, tag, off);
|
|
#else
|
|
if (pcibus_conf_read(pcifd, bus, dev, func, off,
|
|
®s[o2i(off)]) == -1)
|
|
regs[o2i(off)] = 0;
|
|
#endif
|
|
}
|
|
|
|
#ifdef _KERNEL
|
|
sizebars = 1;
|
|
if (PCI_CLASS(regs[o2i(PCI_CLASS_REG)]) == PCI_CLASS_BRIDGE &&
|
|
PCI_SUBCLASS(regs[o2i(PCI_CLASS_REG)]) == PCI_SUBCLASS_BRIDGE_HOST)
|
|
sizebars = 0;
|
|
#endif
|
|
|
|
/* common header */
|
|
printf(" Common header:\n");
|
|
pci_conf_print_regs(regs, 0, 16);
|
|
|
|
printf("\n");
|
|
#ifdef _KERNEL
|
|
pci_conf_print_common(pc, tag, regs);
|
|
#else
|
|
pci_conf_print_common(regs);
|
|
#endif
|
|
printf("\n");
|
|
|
|
/* type-dependent header */
|
|
hdrtype = PCI_HDRTYPE_TYPE(regs[o2i(PCI_BHLC_REG)]);
|
|
switch (hdrtype) { /* XXX make a table, eventually */
|
|
case 0:
|
|
/* Standard device header */
|
|
typename = "\"normal\" device";
|
|
typeprintfn = &pci_conf_print_type0;
|
|
capoff = PCI_CAPLISTPTR_REG;
|
|
endoff = 64;
|
|
break;
|
|
case 1:
|
|
/* PCI-PCI bridge header */
|
|
typename = "PCI-PCI bridge";
|
|
typeprintfn = &pci_conf_print_type1;
|
|
capoff = PCI_CAPLISTPTR_REG;
|
|
endoff = 64;
|
|
break;
|
|
case 2:
|
|
/* PCI-CardBus bridge header */
|
|
typename = "PCI-CardBus bridge";
|
|
typeprintfn = &pci_conf_print_type2;
|
|
capoff = PCI_CARDBUS_CAPLISTPTR_REG;
|
|
endoff = 72;
|
|
break;
|
|
default:
|
|
typename = NULL;
|
|
typeprintfn = 0;
|
|
capoff = -1;
|
|
endoff = 64;
|
|
break;
|
|
}
|
|
printf(" Type %d ", hdrtype);
|
|
if (typename != NULL)
|
|
printf("(%s) ", typename);
|
|
printf("header:\n");
|
|
pci_conf_print_regs(regs, 16, endoff);
|
|
printf("\n");
|
|
if (typeprintfn) {
|
|
#ifdef _KERNEL
|
|
(*typeprintfn)(pc, tag, regs, sizebars);
|
|
#else
|
|
(*typeprintfn)(regs);
|
|
#endif
|
|
} else
|
|
printf(" Don't know how to pretty-print type %d header.\n",
|
|
hdrtype);
|
|
printf("\n");
|
|
|
|
/* capability list, if present */
|
|
if ((regs[o2i(PCI_COMMAND_STATUS_REG)] & PCI_STATUS_CAPLIST_SUPPORT)
|
|
&& (capoff > 0)) {
|
|
#ifdef _KERNEL
|
|
pci_conf_print_caplist(pc, tag, regs, capoff);
|
|
#else
|
|
pci_conf_print_caplist(regs, capoff);
|
|
#endif
|
|
printf("\n");
|
|
}
|
|
|
|
/* device-dependent header */
|
|
printf(" Device-dependent header:\n");
|
|
pci_conf_print_regs(regs, endoff, 256);
|
|
printf("\n");
|
|
#ifdef _KERNEL
|
|
if (printfn)
|
|
(*printfn)(pc, tag, regs);
|
|
else
|
|
printf(" Don't know how to pretty-print device-dependent header.\n");
|
|
printf("\n");
|
|
#endif /* _KERNEL */
|
|
}
|