NetBSD/sys/dev/scsipi/stvar.h

181 lines
7.7 KiB
C

/* $NetBSD: stvar.h,v 1.25 2015/04/13 16:33:25 riastradh Exp $ */
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Charles M. Hannum.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Originally written by Julian Elischer (julian@tfs.com)
* for TRW Financial Systems for use under the MACH(2.5) operating system.
*
* TRW Financial Systems, in accordance with their agreement with Carnegie
* Mellon University, makes this software available to CMU to distribute
* or use in any manner that they see fit as long as this message is kept with
* the software. For this reason TFS also grants any other persons or
* organisations permission to use or modify this software.
*
* TFS supplies this software to be publicly redistributed
* on the understanding that TFS is not responsible for the correct
* functioning of this software in any circumstances.
*
* Ported to run under 386BSD by Julian Elischer (julian@tfs.com) Sept 1992
* major changes by Julian Elischer (julian@jules.dialix.oz.au) May 1993
*
* A lot of rewhacking done by mjacob (mjacob@nas.nasa.gov).
*/
#include <sys/rndsource.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#define ST_IO_TIME (3 * 60 * 1000) /* 3 minutes */
#define ST_CTL_TIME (30 * 1000) /* 30 seconds */
#define ST_SPC_TIME (4 * 60 * 60 * 1000) /* 4 hours */
#define ST_RETRIES 4 /* only on non IO commands */
struct modes {
u_int quirks; /* same definitions as in quirkdata */
int blksize;
uint8_t density;
};
struct quirkdata {
u_int quirks;
#define ST_Q_FORCE_BLKSIZE 0x0001
#define ST_Q_SENSE_HELP 0x0002 /* must do READ for good MODE SENSE */
#define ST_Q_IGNORE_LOADS 0x0004
#define ST_Q_BLKSIZE 0x0008 /* variable-block media_blksize > 0 */
#define ST_Q_UNIMODAL 0x0010 /* unimode drive rejects mode select */
#define ST_Q_NOPREVENT 0x0020 /* does not support PREVENT */
#define ST_Q_ERASE_NOIMM 0x0040 /* drive rejects ERASE/w Immed bit */
#define ST_Q_NOFILEMARKS 0x0080 /* can only write 0 filemarks */
u_int page_0_size;
#define MAX_PAGE_0_SIZE 64
struct modes modes[4];
};
struct st_quirk_inquiry_pattern {
struct scsipi_inquiry_pattern pattern;
struct quirkdata quirkdata;
};
struct st_softc {
device_t sc_dev;
/*--------------------callback to bus-specific code--------------------------*/
int (*ops)(struct st_softc *, int, int);
#define ST_OPS_RBL 0x00 /* read block limit */
#define ST_OPS_MODESENSE 0x01 /* mode sense */
#define ST_OPS_MODESELECT 0x02 /* mode select */
#define ST_OPS_CMPRSS_ON 0x03 /* turn on compression */
#define ST_OPS_CMPRSS_OFF 0x04 /* turn off compression */
/*--------------------present operating parameters, flags etc.---------------*/
int flags; /* see below */
u_int quirks; /* quirks for the open mode */
int blksize; /* blksize we are using */
uint8_t density; /* present density */
u_int page_0_size; /* size of page 0 data */
u_int last_dsty; /* last density opened */
short mt_resid; /* last (short) resid */
short mt_erreg; /* last error (sense key) seen */
/* relative to BOT location */
daddr_t fileno;
daddr_t blkno;
int32_t last_io_resid;
int32_t last_ctl_resid;
#define mt_key mt_erreg
uint8_t asc; /* last asc code seen */
uint8_t ascq; /* last asc code seen */
/*--------------------device/scsi parameters---------------------------------*/
struct scsipi_periph *sc_periph;/* our link to the adpter etc. */
/*--------------------parameters reported by the device ---------------------*/
int blkmin; /* min blk size */
int blkmax; /* max blk size */
const struct quirkdata *quirkdata; /* if we have a rogue entry */
/*--------------------parameters reported by the device for this media-------*/
u_long numblks; /* nominal blocks capacity */
int media_blksize; /* 0 if not ST_FIXEDBLOCKS */
uint8_t media_density; /* this is what it said when asked */
/*--------------------quirks for the whole drive-----------------------------*/
u_int drive_quirks; /* quirks of this drive */
/*--------------------How we should set up when opening each minor device----*/
struct modes modes[4]; /* plus more for each mode */
uint8_t modeflags[4]; /* flags for the modes */
#define DENSITY_SET_BY_USER 0x01
#define DENSITY_SET_BY_QUIRK 0x02
#define BLKSIZE_SET_BY_USER 0x04
#define BLKSIZE_SET_BY_QUIRK 0x08
/*--------------------storage for sense data returned by the drive-----------*/
u_char sense_data[MAX_PAGE_0_SIZE]; /*
* additional sense data needed
* for mode sense/select.
*/
struct bufq_state *buf_queue; /* the queue of pending IO */
/* operations */
struct callout sc_callout; /* restarting the queue after */
/* transient error */
struct io_stats *stats; /* statistics for the drive */
krndsource_t rnd_source;
};
#define ST_INFO_VALID 0x0001
#define ST_BLOCK_SET 0x0002 /* block size, mode set by ioctl */
#define ST_WRITTEN 0x0004 /* data has been written, EOD needed */
#define ST_FIXEDBLOCKS 0x0008
#define ST_AT_FILEMARK 0x0010
#define ST_EIO_PENDING 0x0020 /* error reporting deferred until next op */
#define ST_NEW_MOUNT 0x0040 /* still need to decide mode */
#define ST_READONLY 0x0080 /* st_mode_sense says write protected */
#define ST_FM_WRITTEN 0x0100 /*
* EOF file mark written -- used with
* ~ST_WRITTEN to indicate that multiple file
* marks have been written
*/
#define ST_BLANK_READ 0x0200 /* BLANK CHECK encountered already */
#define ST_2FM_AT_EOD 0x0400 /* write 2 file marks at EOD */
#define ST_MOUNTED 0x0800 /* Device is presently mounted */
#define ST_DONTBUFFER 0x1000 /* Disable buffering/caching */
#define ST_EARLYWARN 0x2000 /* Do (deferred) EOM for variable mode */
#define ST_EOM_PENDING 0x4000 /* EOM reporting deferred until next op */
#define ST_POSUPDATED 0x8000 /* tape position already updated */
#define ST_PER_ACTION (ST_AT_FILEMARK | ST_EIO_PENDING | ST_EOM_PENDING | \
ST_BLANK_READ)
#define ST_PER_MOUNT (ST_INFO_VALID | ST_BLOCK_SET | ST_WRITTEN | \
ST_FIXEDBLOCKS | ST_READONLY | ST_FM_WRITTEN | \
ST_2FM_AT_EOD | ST_PER_ACTION | ST_POSUPDATED)
void stattach(device_t, device_t, void *);
int stdetach(device_t, int);
int st_mode_select(struct st_softc *, int);
extern struct cfdriver st_cd;