Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/pci/if_tlp_pci.c

1714 lines
42 KiB
C
Raw Blame History

/* $NetBSD: if_tlp_pci.c,v 1.127 2019/11/10 21:16:36 chs Exp $ */
/*-
* Copyright (c) 1998, 1999, 2000, 2002 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center; and Charles M. Hannum.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* PCI bus front-end for the Digital Semiconductor ``Tulip'' (21x4x)
* Ethernet controller family driver.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_tlp_pci.c,v 1.127 2019/11/10 21:16:36 chs Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <sys/errno.h>
#include <sys/device.h>
#include <machine/endian.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_ether.h>
#include <sys/bus.h>
#include <sys/intr.h>
#include <dev/mii/miivar.h>
#include <dev/mii/mii_bitbang.h>
#include <dev/ic/tulipreg.h>
#include <dev/ic/tulipvar.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcidevs.h>
/*
* PCI configuration space registers used by the Tulip.
*/
#define TULIP_PCI_IOBA PCI_BAR(0) /* i/o mapped base */
#define TULIP_PCI_MMBA PCI_BAR(1) /* memory mapped base */
#define TULIP_PCI_CFDA 0x40 /* configuration driver area */
#define CFDA_SLEEP 0x80000000 /* sleep mode */
#define CFDA_SNOOZE 0x40000000 /* snooze mode */
struct tulip_pci_softc {
struct tulip_softc sc_tulip; /* real Tulip softc */
/* PCI-specific goo. */
void *sc_ih; /* interrupt handle */
bus_size_t sc_mapsize;
pci_chipset_tag_t sc_pc; /* our PCI chipset */
pcitag_t sc_pcitag; /* our PCI tag */
int sc_flags; /* flags; see below */
LIST_HEAD(, tulip_pci_softc) sc_intrslaves;
LIST_ENTRY(tulip_pci_softc) sc_intrq;
/* Our {ROM,interrupt} master. */
struct tulip_pci_softc *sc_master;
};
/* sc_flags */
#define TULIP_PCI_SHAREDINTR 0x01 /* interrupt is shared */
#define TULIP_PCI_SLAVEINTR 0x02 /* interrupt is slave */
#define TULIP_PCI_SHAREDROM 0x04 /* ROM is shared */
#define TULIP_PCI_SLAVEROM 0x08 /* slave of shared ROM */
static int tlp_pci_match(device_t, cfdata_t, void *);
static void tlp_pci_attach(device_t, device_t, void *);
static int tlp_pci_detach(device_t, int);
CFATTACH_DECL3_NEW(tlp_pci, sizeof(struct tulip_pci_softc),
tlp_pci_match, tlp_pci_attach, tlp_pci_detach, NULL, NULL, NULL,
DVF_DETACH_SHUTDOWN);
static const struct tulip_pci_product {
uint32_t tpp_vendor; /* PCI vendor ID */
uint32_t tpp_product; /* PCI product ID */
tulip_chip_t tpp_chip; /* base Tulip chip type */
} tlp_pci_products[] = {
{ PCI_VENDOR_DEC, PCI_PRODUCT_DEC_21040,
TULIP_CHIP_21040 },
{ PCI_VENDOR_DEC, PCI_PRODUCT_DEC_21041,
TULIP_CHIP_21041 },
{ PCI_VENDOR_DEC, PCI_PRODUCT_DEC_21140,
TULIP_CHIP_21140 },
{ PCI_VENDOR_DEC, PCI_PRODUCT_DEC_21142,
TULIP_CHIP_21142 },
{ PCI_VENDOR_LITEON, PCI_PRODUCT_LITEON_82C168,
TULIP_CHIP_82C168 },
/*
* Note: This is like a MX98725 with Wake-On-LAN and a
* 128-bit multicast hash table.
*/
{ PCI_VENDOR_LITEON, PCI_PRODUCT_LITEON_82C115,
TULIP_CHIP_82C115 },
{ PCI_VENDOR_MACRONIX, PCI_PRODUCT_MACRONIX_MX98713,
TULIP_CHIP_MX98713 },
{ PCI_VENDOR_MACRONIX, PCI_PRODUCT_MACRONIX_MX987x5,
TULIP_CHIP_MX98715 },
{ PCI_VENDOR_COMPEX, PCI_PRODUCT_COMPEX_RL100TX,
TULIP_CHIP_MX98713 },
{ PCI_VENDOR_WINBOND, PCI_PRODUCT_WINBOND_W89C840F,
TULIP_CHIP_WB89C840F },
{ PCI_VENDOR_COMPEX, PCI_PRODUCT_COMPEX_RL100ATX,
TULIP_CHIP_WB89C840F },
{ PCI_VENDOR_DAVICOM, PCI_PRODUCT_DAVICOM_DM9102,
TULIP_CHIP_DM9102 },
{ PCI_VENDOR_ADMTEK, PCI_PRODUCT_ADMTEK_AL981,
TULIP_CHIP_AL981 },
{ PCI_VENDOR_ADMTEK, PCI_PRODUCT_ADMTEK_AN983,
TULIP_CHIP_AN985 },
{ PCI_VENDOR_ADMTEK, PCI_PRODUCT_ADMTEK_ADM9511,
TULIP_CHIP_AN985 },
{ PCI_VENDOR_ADMTEK, PCI_PRODUCT_ADMTEK_ADM9513,
TULIP_CHIP_AN985 },
{ PCI_VENDOR_ACCTON, PCI_PRODUCT_ACCTON_EN2242,
TULIP_CHIP_AN985 },
{ PCI_VENDOR_3COM, PCI_PRODUCT_3COM_3C910SOHOB,
TULIP_CHIP_AN985 },
{ PCI_VENDOR_ASIX, PCI_PRODUCT_ASIX_AX88140A,
TULIP_CHIP_AX88140 },
{ PCI_VENDOR_CONEXANT, PCI_PRODUCT_CONEXANT_LANFINITY,
TULIP_CHIP_RS7112 },
{ 0, 0,
TULIP_CHIP_INVALID },
};
struct tlp_pci_quirks {
void (*tpq_func)(struct tulip_pci_softc *,
const uint8_t *);
uint8_t tpq_oui[3];
};
static void tlp_pci_dec_quirks(struct tulip_pci_softc *,
const uint8_t *);
static void tlp_pci_znyx_21040_quirks(struct tulip_pci_softc *,
const uint8_t *);
static void tlp_pci_smc_21040_quirks(struct tulip_pci_softc *,
const uint8_t *);
static void tlp_pci_cogent_21040_quirks(struct tulip_pci_softc *,
const uint8_t *);
static void tlp_pci_accton_21040_quirks(struct tulip_pci_softc *,
const uint8_t *);
static void tlp_pci_cobalt_21142_quirks(struct tulip_pci_softc *,
const uint8_t *);
static void tlp_pci_algor_21142_quirks(struct tulip_pci_softc *,
const uint8_t *);
static void tlp_pci_netwinder_21142_quirks(struct tulip_pci_softc *,
const uint8_t *);
static void tlp_pci_phobos_21142_quirks(struct tulip_pci_softc *,
const uint8_t *);
static void tlp_pci_znyx_21142_quirks(struct tulip_pci_softc *,
const uint8_t *);
static void tlp_pci_adaptec_quirks(struct tulip_pci_softc *,
const uint8_t *);
static const struct tlp_pci_quirks tlp_pci_21040_quirks[] = {
{ tlp_pci_znyx_21040_quirks, { 0x00, 0xc0, 0x95 } },
{ tlp_pci_smc_21040_quirks, { 0x00, 0x00, 0xc0 } },
{ tlp_pci_cogent_21040_quirks, { 0x00, 0x00, 0x92 } },
{ tlp_pci_accton_21040_quirks, { 0x00, 0x00, 0xe8 } },
{ NULL, { 0, 0, 0 } }
};
static const struct tlp_pci_quirks tlp_pci_21041_quirks[] = {
{ tlp_pci_dec_quirks, { 0x08, 0x00, 0x2b } },
{ tlp_pci_dec_quirks, { 0x00, 0x00, 0xf8 } },
{ NULL, { 0, 0, 0 } }
};
static void tlp_pci_asante_21140_quirks(struct tulip_pci_softc *,
const uint8_t *);
static void tlp_pci_e100_quirks(struct tulip_pci_softc *,
const uint8_t *);
static void tlp_pci_phobos_21140_quirks(struct tulip_pci_softc *,
const uint8_t *);
static void tlp_pci_smc_21140_quirks(struct tulip_pci_softc *,
const uint8_t *);
static void tlp_pci_vpc_21140_quirks(struct tulip_pci_softc *,
const uint8_t *);
static const struct tlp_pci_quirks tlp_pci_21140_quirks[] = {
{ tlp_pci_dec_quirks, { 0x08, 0x00, 0x2b } },
{ tlp_pci_dec_quirks, { 0x00, 0x00, 0xf8 } },
{ tlp_pci_e100_quirks, { 0x00, 0xa0, 0x59 } },
{ tlp_pci_asante_21140_quirks, { 0x00, 0x00, 0x94 } },
{ tlp_pci_adaptec_quirks, { 0x00, 0x00, 0x92 } },
{ tlp_pci_adaptec_quirks, { 0x00, 0x00, 0xd1 } },
{ tlp_pci_phobos_21140_quirks, { 0x00, 0x60, 0xf5 } },
{ tlp_pci_smc_21140_quirks, { 0x00, 0x00, 0xc0 } },
{ tlp_pci_vpc_21140_quirks, { 0x00, 0x03, 0xff } },
{ NULL, { 0, 0, 0 } }
};
static const struct tlp_pci_quirks tlp_pci_21142_quirks[] = {
{ tlp_pci_dec_quirks, { 0x08, 0x00, 0x2b } },
{ tlp_pci_dec_quirks, { 0x00, 0x00, 0xf8 } },
{ tlp_pci_cobalt_21142_quirks, { 0x00, 0x10, 0xe0 } },
{ tlp_pci_algor_21142_quirks, { 0x00, 0x40, 0xbc } },
{ tlp_pci_adaptec_quirks, { 0x00, 0x00, 0xd1 } },
{ tlp_pci_netwinder_21142_quirks,{ 0x00, 0x10, 0x57 } },
{ tlp_pci_phobos_21142_quirks, { 0x00, 0x60, 0xf5 } },
{ tlp_pci_znyx_21142_quirks, { 0x00, 0xc0, 0x95 } },
{ NULL, { 0, 0, 0 } }
};
static int tlp_pci_shared_intr(void *);
static const struct tulip_pci_product *
tlp_pci_lookup(const struct pci_attach_args *pa)
{
const struct tulip_pci_product *tpp;
/* Don't match lmc cards */
if (PCI_VENDOR(pci_conf_read(pa->pa_pc, pa->pa_tag,
PCI_SUBSYS_ID_REG)) == PCI_VENDOR_LMC)
return NULL;
for (tpp = tlp_pci_products; tpp->tpp_chip != TULIP_CHIP_INVALID;
tpp++) {
if (PCI_VENDOR(pa->pa_id) == tpp->tpp_vendor &&
PCI_PRODUCT(pa->pa_id) == tpp->tpp_product)
return tpp;
}
return NULL;
}
static void
tlp_pci_get_quirks(struct tulip_pci_softc *psc, const uint8_t *enaddr,
const struct tlp_pci_quirks *tpq)
{
for (; tpq->tpq_func != NULL; tpq++) {
if (tpq->tpq_oui[0] == enaddr[0] &&
tpq->tpq_oui[1] == enaddr[1] &&
tpq->tpq_oui[2] == enaddr[2]) {
(*tpq->tpq_func)(psc, enaddr);
return;
}
}
}
static void
tlp_pci_check_slaved(struct tulip_pci_softc *psc, int shared, int slaved)
{
extern struct cfdriver tlp_cd;
struct tulip_pci_softc *cur, *best = NULL;
struct tulip_softc *sc = &psc->sc_tulip;
int i;
/*
* First of all, find the lowest pcidev numbered device on our
* bus marked as shared. That should be our master.
*/
for (i = 0; i < tlp_cd.cd_ndevs; i++) {
if ((cur = device_lookup_private(&tlp_cd, i)) == NULL)
continue;
if (device_parent(cur->sc_tulip.sc_dev) !=
device_parent(sc->sc_dev))
continue;
if ((cur->sc_flags & shared) == 0)
continue;
if (cur == psc)
continue;
if (best == NULL ||
best->sc_tulip.sc_devno > cur->sc_tulip.sc_devno)
best = cur;
}
if (best != NULL) {
psc->sc_master = best;
psc->sc_flags |= (shared | slaved);
}
}
static int
tlp_pci_match(device_t parent, cfdata_t match, void *aux)
{
struct pci_attach_args *pa = aux;
if (tlp_pci_lookup(pa) != NULL)
return 10; /* beat if_de.c */
return 0;
}
static void
tlp_pci_attach(device_t parent, device_t self, void *aux)
{
struct tulip_pci_softc *psc = device_private(self);
struct tulip_softc *sc = &psc->sc_tulip;
struct pci_attach_args *pa = aux;
pci_chipset_tag_t pc = pa->pa_pc;
pci_intr_handle_t ih;
const char *intrstr = NULL;
bus_space_tag_t iot, memt;
bus_space_handle_t ioh, memh;
int ioh_valid, memh_valid, i, j;
const struct tulip_pci_product *tpp;
prop_data_t ea;
uint8_t enaddr[ETHER_ADDR_LEN];
uint32_t val = 0;
pcireg_t reg;
int error;
bus_size_t iosize = 0, memsize = 0;
char intrbuf[PCI_INTRSTR_LEN];
sc->sc_dev = self;
sc->sc_devno = pa->pa_device;
psc->sc_pc = pa->pa_pc;
psc->sc_pcitag = pa->pa_tag;
LIST_INIT(&psc->sc_intrslaves);
tpp = tlp_pci_lookup(pa);
if (tpp == NULL) {
printf("\n");
panic("tlp_pci_attach: impossible");
}
sc->sc_chip = tpp->tpp_chip;
/*
* By default, Tulip registers are 8 bytes long (4 bytes
* followed by a 4 byte pad).
*/
sc->sc_regshift = 3;
/*
* No power management hooks.
* XXX Maybe we should add some!
*/
sc->sc_flags |= TULIPF_ENABLED;
/*
* Get revision info, and set some chip-specific variables.
*/
sc->sc_rev = PCI_REVISION(pa->pa_class);
switch (sc->sc_chip) {
case TULIP_CHIP_21140:
if (sc->sc_rev >= 0x20)
sc->sc_chip = TULIP_CHIP_21140A;
break;
case TULIP_CHIP_21142:
if (sc->sc_rev >= 0x20)
sc->sc_chip = TULIP_CHIP_21143;
break;
case TULIP_CHIP_82C168:
if (sc->sc_rev >= 0x20)
sc->sc_chip = TULIP_CHIP_82C169;
break;
case TULIP_CHIP_MX98713:
if (sc->sc_rev >= 0x10)
sc->sc_chip = TULIP_CHIP_MX98713A;
break;
case TULIP_CHIP_MX98715:
if (sc->sc_rev >= 0x20)
sc->sc_chip = TULIP_CHIP_MX98715A;
if (sc->sc_rev >= 0x25)
sc->sc_chip = TULIP_CHIP_MX98715AEC_X;
if (sc->sc_rev >= 0x30)
sc->sc_chip = TULIP_CHIP_MX98725;
break;
case TULIP_CHIP_WB89C840F:
sc->sc_regshift = 2;
break;
case TULIP_CHIP_AN985:
/*
* The AN983 and AN985 are very similar, and are
* differentiated by a "signature" register that
* is like, but not identical, to a PCI ID register.
*/
reg = pci_conf_read(pc, pa->pa_tag, 0x80);
switch (reg) {
case 0x09811317:
sc->sc_chip = TULIP_CHIP_AN985;
break;
case 0x09851317:
sc->sc_chip = TULIP_CHIP_AN983;
break;
default:
/* Unknown -- use default. */
break;
}
break;
case TULIP_CHIP_AX88140:
if (sc->sc_rev >= 0x10)
sc->sc_chip = TULIP_CHIP_AX88141;
break;
case TULIP_CHIP_DM9102:
if (sc->sc_rev >= 0x30)
sc->sc_chip = TULIP_CHIP_DM9102A;
break;
default:
/* Nothing. */
break;
}
aprint_normal(": %s Ethernet, pass %d.%d\n",
tlp_chip_name(sc->sc_chip),
(sc->sc_rev >> 4) & 0xf, sc->sc_rev & 0xf);
switch (sc->sc_chip) {
case TULIP_CHIP_21040:
if (sc->sc_rev < 0x20) {
aprint_normal_dev(self,
"21040 must be at least pass 2.0\n");
return;
}
break;
case TULIP_CHIP_21140:
if (sc->sc_rev < 0x11) {
aprint_normal_dev(self,
"21140 must be at least pass 1.1\n");
return;
}
break;
default:
/* Nothing. */
break;
}
/*
* Check to see if the device is in power-save mode, and
* being it out if necessary.
*/
switch (sc->sc_chip) {
case TULIP_CHIP_21140:
case TULIP_CHIP_21140A:
case TULIP_CHIP_21142:
case TULIP_CHIP_21143:
case TULIP_CHIP_MX98713A:
case TULIP_CHIP_MX98715:
case TULIP_CHIP_MX98715A:
case TULIP_CHIP_MX98715AEC_X:
case TULIP_CHIP_MX98725:
case TULIP_CHIP_DM9102:
case TULIP_CHIP_DM9102A:
case TULIP_CHIP_AX88140:
case TULIP_CHIP_AX88141:
case TULIP_CHIP_RS7112:
/*
* Clear the "sleep mode" bit in the CFDA register.
*/
reg = pci_conf_read(pc, pa->pa_tag, TULIP_PCI_CFDA);
if (reg & (CFDA_SLEEP | CFDA_SNOOZE))
pci_conf_write(pc, pa->pa_tag, TULIP_PCI_CFDA,
reg & ~(CFDA_SLEEP | CFDA_SNOOZE));
break;
default:
/* Nothing. */
break;
}
/* power up chip */
if ((error = pci_activate(pa->pa_pc, pa->pa_tag, self,
NULL)) && error != EOPNOTSUPP) {
aprint_error_dev(self, "cannot activate %d\n", error);
return;
}
/*
* Map the device.
*/
ioh_valid = (pci_mapreg_map(pa, TULIP_PCI_IOBA,
PCI_MAPREG_TYPE_IO, 0,
&iot, &ioh, NULL, &iosize) == 0);
memh_valid = (pci_mapreg_map(pa, TULIP_PCI_MMBA,
PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT, 0,
&memt, &memh, NULL, &memsize) == 0);
if (memh_valid) {
sc->sc_st = memt;
sc->sc_sh = memh;
psc->sc_mapsize = memsize;
if (ioh_valid) {
bus_space_unmap(iot, ioh, iosize);
ioh_valid = 0;
}
} else if (ioh_valid) {
sc->sc_st = iot;
sc->sc_sh = ioh;
psc->sc_mapsize = iosize;
if (memh_valid) {
bus_space_unmap(memt, memh, memsize);
memh_valid = 0;
}
} else {
aprint_error_dev(self, "unable to map device registers\n");
goto fail;
}
sc->sc_dmat = pa->pa_dmat;
/*
* Make sure bus mastering is enabled.
*/
pci_conf_write(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG) |
PCI_COMMAND_MASTER_ENABLE);
/*
* Get the cacheline size.
*/
sc->sc_cacheline = PCI_CACHELINE(pci_conf_read(pc, pa->pa_tag,
PCI_BHLC_REG));
/*
* Get PCI data moving command info.
*/
if (pa->pa_flags & PCI_FLAGS_MRL_OKAY)
sc->sc_flags |= TULIPF_MRL;
if (pa->pa_flags & PCI_FLAGS_MRM_OKAY)
sc->sc_flags |= TULIPF_MRM;
if (pa->pa_flags & PCI_FLAGS_MWI_OKAY)
sc->sc_flags |= TULIPF_MWI;
/*
* Read the contents of the Ethernet Address ROM/SROM.
*/
switch (sc->sc_chip) {
case TULIP_CHIP_21040:
sc->sc_srom_addrbits = 6;
sc->sc_srom = malloc(TULIP_ROM_SIZE(6), M_DEVBUF, M_WAITOK);
TULIP_WRITE(sc, CSR_MIIROM, MIIROM_SROMCS);
for (i = 0; i < TULIP_ROM_SIZE(6); i++) {
for (j = 0; j < 10000; j++) {
val = TULIP_READ(sc, CSR_MIIROM);
if ((val & MIIROM_DN) == 0)
break;
}
sc->sc_srom[i] = val & MIIROM_DATA;
}
break;
case TULIP_CHIP_82C168:
case TULIP_CHIP_82C169:
{
sc->sc_srom_addrbits = 2;
sc->sc_srom = malloc(TULIP_ROM_SIZE(2), M_DEVBUF, M_WAITOK);
/*
* The Lite-On PNIC stores the Ethernet address in
* the first 3 words of the EEPROM. EEPROM access
* is not like the other Tulip chips.
*/
for (i = 0; i < 6; i += 2) {
TULIP_WRITE(sc, CSR_PNIC_SROMCTL,
PNIC_SROMCTL_READ | (i >> 1));
for (j = 0; j < 500; j++) {
delay(2);
val = TULIP_READ(sc, CSR_MIIROM);
if ((val & PNIC_MIIROM_BUSY) == 0)
break;
}
if (val & PNIC_MIIROM_BUSY) {
aprint_error_dev(self, "EEPROM timed out\n");
goto fail;
}
val &= PNIC_MIIROM_DATA;
sc->sc_srom[i] = val >> 8;
sc->sc_srom[i + 1] = val & 0xff;
}
break;
}
default:
/*
* XXX This isn't quite the right way to do this; we should
* XXX be attempting to fetch the mac-addr property in the
* XXX bus-agnostic part of the driver independently. But
* XXX that requires a larger change in the SROM handling
* XXX logic, and for now we can at least remove a machine-
* XXX dependent wart from the PCI front-end.
*/
ea = prop_dictionary_get(device_properties(self),
"mac-address");
if (ea != NULL) {
extern int tlp_srom_debug;
KASSERT(prop_object_type(ea) == PROP_TYPE_DATA);
KASSERT(prop_data_size(ea) == ETHER_ADDR_LEN);
memcpy(enaddr, prop_data_data_nocopy(ea),
ETHER_ADDR_LEN);
sc->sc_srom_addrbits = 6;
sc->sc_srom = malloc(TULIP_ROM_SIZE(6), M_DEVBUF,
M_WAITOK | M_ZERO);
memcpy(sc->sc_srom, enaddr, sizeof(enaddr));
if (tlp_srom_debug) {
aprint_normal("SROM CONTENTS:");
for (i = 0; i < TULIP_ROM_SIZE(6); i++) {
if ((i % 8) == 0)
aprint_normal("\n\t");
aprint_normal("0x%02x ", sc->sc_srom[i]);
}
aprint_normal("\n");
}
break;
}
/* Check for a slaved ROM on a multi-port board. */
tlp_pci_check_slaved(psc, TULIP_PCI_SHAREDROM,
TULIP_PCI_SLAVEROM);
if (psc->sc_flags & TULIP_PCI_SLAVEROM) {
sc->sc_srom_addrbits =
psc->sc_master->sc_tulip.sc_srom_addrbits;
sc->sc_srom = psc->sc_master->sc_tulip.sc_srom;
enaddr[5] +=
sc->sc_devno - psc->sc_master->sc_tulip.sc_devno;
}
else if (tlp_read_srom(sc) == 0)
goto cant_cope;
break;
}
/*
* Deal with chip/board quirks. This includes setting up
* the mediasw, and extracting the Ethernet address from
* the rombuf.
*/
switch (sc->sc_chip) {
case TULIP_CHIP_21040:
/*
* Parse the Ethernet Address ROM.
*/
if (tlp_parse_old_srom(sc, enaddr) == 0)
goto cant_cope;
/*
* All 21040 boards start out with the same
* media switch.
*/
sc->sc_mediasw = &tlp_21040_mediasw;
/*
* Deal with any quirks this board might have.
*/
tlp_pci_get_quirks(psc, enaddr, tlp_pci_21040_quirks);
break;
case TULIP_CHIP_21041:
/* Check for new format SROM. */
if (tlp_isv_srom_enaddr(sc, enaddr) == 0) {
/*
* Not an ISV SROM; try the old DEC Ethernet Address
* ROM format.
*/
if (tlp_parse_old_srom(sc, enaddr) == 0)
goto cant_cope;
}
/*
* All 21041 boards use the same media switch; they all
* work basically the same! Yippee!
*/
sc->sc_mediasw = &tlp_21041_mediasw;
/*
* Deal with any quirks this board might have.
*/
tlp_pci_get_quirks(psc, enaddr, tlp_pci_21041_quirks);
break;
case TULIP_CHIP_21140:
case TULIP_CHIP_21140A:
/* Check for new format SROM. */
if (tlp_isv_srom_enaddr(sc, enaddr) == 0) {
/*
* Not an ISV SROM; try the old DEC Ethernet Address
* ROM format.
*/
if (tlp_parse_old_srom(sc, enaddr) == 0)
goto cant_cope;
} else {
/*
* We start out with the 2114x ISV media switch.
* When we search for quirks, we may change to
* a different switch.
*/
sc->sc_mediasw = &tlp_2114x_isv_mediasw;
}
/*
* Deal with any quirks this board might have.
*/
tlp_pci_get_quirks(psc, enaddr, tlp_pci_21140_quirks);
/*
* Bail out now if we can't deal with this board.
*/
if (sc->sc_mediasw == NULL)
goto cant_cope;
break;
case TULIP_CHIP_21142:
case TULIP_CHIP_21143:
/* Check for new format SROM. */
if (tlp_isv_srom_enaddr(sc, enaddr) == 0) {
/*
* Not an ISV SROM; try the old DEC Ethernet Address
* ROM format.
*/
if (tlp_parse_old_srom(sc, enaddr) == 0) {
/*
* One last try: just copy the address
* from offset 20 and try to look
* up quirks.
*/
memcpy(enaddr, &sc->sc_srom[20],
ETHER_ADDR_LEN);
}
} else {
/*
* We start out with the 2114x ISV media switch.
* When we search for quirks, we may change to
* a different switch.
*/
sc->sc_mediasw = &tlp_2114x_isv_mediasw;
}
/*
* Deal with any quirks this board might have.
*/
tlp_pci_get_quirks(psc, enaddr, tlp_pci_21142_quirks);
/*
* Bail out now if we can't deal with this board.
*/
if (sc->sc_mediasw == NULL)
goto cant_cope;
break;
case TULIP_CHIP_82C168:
case TULIP_CHIP_82C169:
/*
* Lite-On PNIC's Ethernet address is the first 6
* bytes of its EEPROM.
*/
memcpy(enaddr, sc->sc_srom, ETHER_ADDR_LEN);
/*
* Lite-On PNICs always use the same mediasw; we
* select MII vs. internal NWAY automatically.
*/
sc->sc_mediasw = &tlp_pnic_mediasw;
break;
case TULIP_CHIP_MX98713:
/*
* The Macronix MX98713 has an MII and GPIO, but no
* internal Nway block. This chip is basically a
* perfect 21140A clone, with the exception of the
* a magic register frobbing in order to make the
* interface function.
*/
if (tlp_isv_srom_enaddr(sc, enaddr)) {
sc->sc_mediasw = &tlp_2114x_isv_mediasw;
break;
}
/* FALLTHROUGH */
case TULIP_CHIP_82C115:
/*
* Yippee! The Lite-On 82C115 is a clone of
* the MX98725 (the data sheet even says `MXIC'
* on it)! Imagine that, a clone of a clone.
*
* The differences are really minimal:
*
* - Wake-On-LAN support
* - 128-bit multicast hash table, rather than
* the standard 512-bit hash table
*/
/* FALLTHROUGH */
case TULIP_CHIP_MX98713A:
case TULIP_CHIP_MX98715A:
case TULIP_CHIP_MX98715AEC_X:
case TULIP_CHIP_MX98725:
/*
* The MX98713A has an MII as well as an internal Nway block,
* but no GPIO. The MX98715 and MX98725 have an internal
* Nway block only.
*
* The internal Nway block, unlike the Lite-On PNIC's, does
* just that - performs Nway. Once autonegotiation completes,
* we must program the GPR media information into the chip.
*
* The byte offset of the Ethernet address is stored at
* offset 0x70.
*/
memcpy(enaddr, &sc->sc_srom[sc->sc_srom[0x70]], ETHER_ADDR_LEN);
sc->sc_mediasw = &tlp_pmac_mediasw;
break;
case TULIP_CHIP_WB89C840F:
/*
* Winbond 89C840F's Ethernet address is the first
* 6 bytes of its EEPROM.
*/
memcpy(enaddr, sc->sc_srom, ETHER_ADDR_LEN);
/*
* Winbond 89C840F has an MII attached to the SIO.
*/
sc->sc_mediasw = &tlp_sio_mii_mediasw;
break;
case TULIP_CHIP_AL981:
/*
* The ADMtek AL981's Ethernet address is located
* at offset 8 of its EEPROM.
*/
memcpy(enaddr, &sc->sc_srom[8], ETHER_ADDR_LEN);
/*
* ADMtek AL981 has a built-in PHY accessed through
* special registers.
*/
sc->sc_mediasw = &tlp_al981_mediasw;
break;
case TULIP_CHIP_AN983:
case TULIP_CHIP_AN985:
/*
* The ADMtek AN985's Ethernet address is located
* at offset 8 of its EEPROM.
*/
memcpy(enaddr, &sc->sc_srom[8], ETHER_ADDR_LEN);
/*
* The ADMtek AN985 can be configured in Single-Chip
* mode or MAC-only mode. Single-Chip uses the built-in
* PHY, MAC-only has an external PHY (usually HomePNA).
* The selection is based on an EEPROM setting, and both
* PHYs are accessed via MII attached to SIO.
*
* The AN985 "ghosts" the internal PHY onto all
* MII addresses, so we have to use a media init
* routine that limits the search.
* XXX How does this work with MAC-only mode?
*/
sc->sc_mediasw = &tlp_an985_mediasw;
break;
case TULIP_CHIP_DM9102:
case TULIP_CHIP_DM9102A:
/*
* Some boards with the Davicom chip have an ISV
* SROM (mostly DM9102A boards -- trying to describe
* the HomePNA PHY, probably) although the data in
* them is generally wrong. Check for ISV format
* and grab the Ethernet address that way, and if
* that fails, fall back on grabbing it from an
* observed offset of 20 (which is where it would
* be in an ISV SROM anyhow, tho ISV can cope with
* multi-port boards).
*/
if (!tlp_isv_srom_enaddr(sc, enaddr)) {
prop_data_t eaddrprop;
eaddrprop = prop_dictionary_get(
device_properties(self), "mac-address");
if (eaddrprop != NULL
&& prop_data_size(eaddrprop) == ETHER_ADDR_LEN)
memcpy(enaddr,
prop_data_data_nocopy(eaddrprop),
ETHER_ADDR_LEN);
else
memcpy(enaddr, &sc->sc_srom[20],
ETHER_ADDR_LEN);
}
/*
* Davicom chips all have an internal MII interface
* and a built-in PHY. DM9102A also has a an external
* MII interface, usually with a HomePNA PHY attached
* to it.
*/
sc->sc_mediasw = &tlp_dm9102_mediasw;
break;
case TULIP_CHIP_AX88140:
case TULIP_CHIP_AX88141:
/*
* ASIX AX88140/AX88141 Ethernet Address is located at offset
* 20 of the SROM.
*/
memcpy(enaddr, &sc->sc_srom[20], ETHER_ADDR_LEN);
/*
* ASIX AX88140A/AX88141 chip can have a built-in PHY or
* an external MII interface.
*/
sc->sc_mediasw = &tlp_asix_mediasw;
break;
case TULIP_CHIP_RS7112:
/*
* RS7112 Ethernet Address is located of offset 0x19a
* of the SROM
*/
memcpy(enaddr, &sc->sc_srom[0x19a], ETHER_ADDR_LEN);
/* RS7112 chip has a PHY at MII address 1 */
sc->sc_mediasw = &tlp_rs7112_mediasw;
break;
default:
cant_cope:
aprint_error_dev(self, "sorry, unable to handle your board\n");
goto fail;
}
/*
* Handle shared interrupts.
*/
if (psc->sc_flags & TULIP_PCI_SHAREDINTR) {
if (psc->sc_master)
psc->sc_flags |= TULIP_PCI_SLAVEINTR;
else {
tlp_pci_check_slaved(psc, TULIP_PCI_SHAREDINTR,
TULIP_PCI_SLAVEINTR);
if (psc->sc_master == NULL)
psc->sc_master = psc;
}
LIST_INSERT_HEAD(&psc->sc_master->sc_intrslaves,
psc, sc_intrq);
}
if (psc->sc_flags & TULIP_PCI_SLAVEINTR) {
aprint_normal_dev(self, "sharing interrupt with %s\n",
device_xname(psc->sc_master->sc_tulip.sc_dev));
} else {
/*
* Map and establish our interrupt.
*/
if (pci_intr_map(pa, &ih)) {
aprint_error_dev(self, "unable to map interrupt\n");
goto fail;
}
intrstr = pci_intr_string(pc, ih, intrbuf, sizeof(intrbuf));
psc->sc_ih = pci_intr_establish_xname(pc, ih, IPL_NET,
(psc->sc_flags & TULIP_PCI_SHAREDINTR) ?
tlp_pci_shared_intr : tlp_intr, sc, device_xname(self));
if (psc->sc_ih == NULL) {
aprint_error_dev(self, "unable to establish interrupt");
if (intrstr != NULL)
aprint_error(" at %s", intrstr);
aprint_error("\n");
goto fail;
}
aprint_normal_dev(self, "interrupting at %s\n",
intrstr);
}
/*
* Finish off the attach.
*/
error = tlp_attach(sc, enaddr);
if (error)
goto fail;
return;
fail:
if (psc->sc_ih != NULL) {
pci_intr_disestablish(psc->sc_pc, psc->sc_ih);
psc->sc_ih = NULL;
}
if (ioh_valid)
bus_space_unmap(iot, ioh, iosize);
if (memh_valid)
bus_space_unmap(memt, memh, memsize);
psc->sc_mapsize = 0;
return;
}
static int
tlp_pci_detach(device_t self, int flags)
{
struct tulip_pci_softc *psc = device_private(self);
struct tulip_softc *sc = &psc->sc_tulip;
int rv;
rv = tlp_detach(sc);
if (rv)
return rv;
if (psc->sc_ih != NULL) {
pci_intr_disestablish(psc->sc_pc, psc->sc_ih);
psc->sc_ih = NULL;
}
if (psc->sc_mapsize) {
bus_space_unmap(sc->sc_st, sc->sc_sh, psc->sc_mapsize);
psc->sc_mapsize = 0;
}
return 0;
}
static int
tlp_pci_shared_intr(void *arg)
{
struct tulip_pci_softc *master = arg, *slave;
int rv = 0;
for (slave = LIST_FIRST(&master->sc_intrslaves);
slave != NULL;
slave = LIST_NEXT(slave, sc_intrq))
rv |= tlp_intr(&slave->sc_tulip);
return rv;
}
static void
tlp_pci_dec_quirks(struct tulip_pci_softc *psc, const uint8_t *enaddr)
{
struct tulip_softc *sc = &psc->sc_tulip;
/*
* This isn't really a quirk-gathering device, really. We
* just want to get the spiffy DEC board name from the SROM.
*/
strcpy(sc->sc_name, "DEC ");
if (memcmp(&sc->sc_srom[29], "DE500", 5) == 0 ||
memcmp(&sc->sc_srom[29], "DE450", 5) == 0)
memcpy(&sc->sc_name[4], &sc->sc_srom[29], 8);
else
sc->sc_name[3] = '\0';
}
static void
tlp_pci_znyx_21040_quirks(struct tulip_pci_softc *psc, const uint8_t *enaddr)
{
struct tulip_softc *sc = &psc->sc_tulip;
uint16_t id = 0;
/*
* If we have a slaved ROM, just copy the bits from the master.
* This is in case we fail the ROM ID check (older boards) and
* need to fall back on Ethernet address model checking; that
* will fail for slave chips.
*/
if (psc->sc_flags & TULIP_PCI_SLAVEROM) {
strcpy(sc->sc_name, psc->sc_master->sc_tulip.sc_name);
sc->sc_mediasw = psc->sc_master->sc_tulip.sc_mediasw;
psc->sc_flags |=
psc->sc_master->sc_flags & TULIP_PCI_SHAREDINTR;
return;
}
if (sc->sc_srom[32] == 0x4a && sc->sc_srom[33] == 0x52) {
id = sc->sc_srom[37] | (sc->sc_srom[36] << 8);
switch (id) {
zx312:
case 0x0602: /* ZX312 */
strcpy(sc->sc_name, "ZNYX ZX312");
return;
case 0x0622: /* ZX312T */
strcpy(sc->sc_name, "ZNYX ZX312T");
sc->sc_mediasw = &tlp_21040_tp_mediasw;
return;
zx314_inta:
case 0x0701: /* ZX314 INTA */
psc->sc_flags |= TULIP_PCI_SHAREDINTR;
/* FALLTHROUGH */
case 0x0711: /* ZX314 */
strcpy(sc->sc_name, "ZNYX ZX314");
psc->sc_flags |= TULIP_PCI_SHAREDROM;
sc->sc_mediasw = &tlp_21040_tp_mediasw;
return;
zx315_inta:
case 0x0801: /* ZX315 INTA */
psc->sc_flags |= TULIP_PCI_SHAREDINTR;
/* FALLTHROUGH */
case 0x0811: /* ZX315 */
strcpy(sc->sc_name, "ZNYX ZX315");
psc->sc_flags |= TULIP_PCI_SHAREDROM;
return;
default:
id = 0;
break;
}
}
/*
* Deal with boards that have broken ROMs.
*/
if (id == 0) {
if ((enaddr[3] & ~3) == 0xf0 && (enaddr[5] & 3) == 0x00)
goto zx314_inta;
if ((enaddr[3] & ~3) == 0xf4 && (enaddr[5] & 1) == 0x00)
goto zx315_inta;
if ((enaddr[3] & ~3) == 0xec)
goto zx312;
}
strcpy(sc->sc_name, "ZNYX ZX31x");
}
static void tlp_pci_znyx_21142_qs6611_reset(struct tulip_softc *);
static void
tlp_pci_znyx_21142_quirks(struct tulip_pci_softc *psc, const uint8_t *enaddr)
{
struct tulip_softc *sc = &psc->sc_tulip;
pcireg_t subid;
subid = pci_conf_read(psc->sc_pc, psc->sc_pcitag, PCI_SUBSYS_ID_REG);
if (PCI_VENDOR(subid) != PCI_VENDOR_ZNYX)
return; /* ? */
switch (PCI_PRODUCT(subid) & 0xff) {
/*
* ZNYX 21143 boards with QS6611 PHY
*/
case 0x12: /* ZX345Q */
case 0x13: /* ZX346Q */
case 0x14: /* ZX348Q */
case 0x18: /* ZX414 */
case 0x19: /* ZX412 */
case 0x1a: /* ZX444 */
case 0x1b: /* ZX442 */
case 0x23: /* ZX212 */
case 0x24: /* ZX214 */
case 0x29: /* ZX374 */
case 0x2d: /* ZX372 */
case 0x2b: /* ZX244 */
case 0x2c: /* ZX424 */
case 0x2e: /* ZX422 */
aprint_normal_dev(sc->sc_dev, "QS6611 PHY\n");
sc->sc_reset = tlp_pci_znyx_21142_qs6611_reset;
break;
}
}
static void
tlp_pci_znyx_21142_qs6611_reset(struct tulip_softc *sc)
{
/*
* Reset QS6611 PHY.
*/
TULIP_WRITE(sc, CSR_SIAGEN,
SIAGEN_CWE | SIAGEN_LGS1 | SIAGEN_ABM | (0xf << 16));
delay(200);
TULIP_WRITE(sc, CSR_SIAGEN, (0x4 << 16));
delay(10000);
}
static void
tlp_pci_smc_21040_quirks(struct tulip_pci_softc *psc, const uint8_t *enaddr)
{
struct tulip_softc *sc = &psc->sc_tulip;
uint16_t id1, id2, ei;
int auibnc = 0, utp = 0;
char *cp;
id1 = sc->sc_srom[0x60] | (sc->sc_srom[0x61] << 8);
id2 = sc->sc_srom[0x62] | (sc->sc_srom[0x63] << 8);
ei = sc->sc_srom[0x66] | (sc->sc_srom[0x67] << 8);
strcpy(sc->sc_name, "SMC 8432");
cp = &sc->sc_name[8];
if ((id1 & 1) == 0) {
*cp++ = 'B';
auibnc = 1;
}
if ((id1 & 0xff) > 0x32) {
*cp++ = 'T';
utp = 1;
}
if ((id1 & 0x4000) == 0) {
*cp++ = 'A';
auibnc = 1;
}
if (id2 == 0x15) {
sc->sc_name[7] = '4';
*cp++ = '-';
*cp++ = 'C';
*cp++ = 'H';
*cp++ = ei ? '2' : '1';
}
*cp = '\0';
if (utp != 0 && auibnc == 0)
sc->sc_mediasw = &tlp_21040_tp_mediasw;
else if (utp == 0 && auibnc != 0)
sc->sc_mediasw = &tlp_21040_auibnc_mediasw;
}
static void
tlp_pci_cogent_21040_quirks(struct tulip_pci_softc *psc, const uint8_t *enaddr)
{
strcpy(psc->sc_tulip.sc_name, "Cogent multi-port");
psc->sc_flags |= TULIP_PCI_SHAREDINTR | TULIP_PCI_SHAREDROM;
}
static void
tlp_pci_accton_21040_quirks(struct tulip_pci_softc *psc, const uint8_t *enaddr)
{
strcpy(psc->sc_tulip.sc_name, "ACCTON EN1203");
}
static void tlp_pci_asante_21140_reset(struct tulip_softc *);
static void
tlp_pci_asante_21140_quirks(struct tulip_pci_softc *psc, const uint8_t *enaddr)
{
struct tulip_softc *sc = &psc->sc_tulip;
/*
* Some Asante boards don't use the ISV SROM format. For
* those that don't, we initialize the GPIO direction bits,
* and provide our own reset hook, which resets the MII.
*
* All of these boards use SIO-attached-MII media.
*/
if (sc->sc_mediasw == &tlp_2114x_isv_mediasw)
return;
strcpy(sc->sc_name, "Asante");
sc->sc_gp_dir = 0xbf;
sc->sc_reset = tlp_pci_asante_21140_reset;
sc->sc_mediasw = &tlp_sio_mii_mediasw;
}
static void
tlp_pci_e100_quirks(struct tulip_pci_softc *psc, const uint8_t *enaddr)
{
struct tulip_softc *sc = &psc->sc_tulip;
if (sc->sc_mediasw == &tlp_2114x_isv_mediasw)
return;
strcpy(sc->sc_name, "UMAX E100");
sc->sc_gp_dir = 0xbf;
sc->sc_reset = tlp_pci_asante_21140_reset;
sc->sc_mediasw = &tlp_sio_mii_mediasw;
}
static void
tlp_pci_asante_21140_reset(struct tulip_softc *sc)
{
TULIP_WRITE(sc, CSR_GPP, GPP_GPC | sc->sc_gp_dir);
TULIP_WRITE(sc, CSR_GPP, 0x8);
delay(100);
TULIP_WRITE(sc, CSR_GPP, 0);
}
static void tlp_pci_phobos_21140_reset(struct tulip_softc *);
static void
tlp_pci_phobos_21140_quirks(struct tulip_pci_softc *psc, const uint8_t *enaddr)
{
struct tulip_softc *sc = &psc->sc_tulip;
/*
* Phobos boards just use MII-on-SIO.
*/
sc->sc_mediasw = &tlp_sio_mii_mediasw;
sc->sc_reset = tlp_pci_phobos_21140_reset;
/*
* These boards appear solely on sgimips machines behind a special
* GIO<->PCI ASIC and require the DBO and BLE bits to be set in CSR0.
*/
sc->sc_flags |= (TULIPF_BLE | TULIPF_DBO);
}
static void
tlp_pci_phobos_21140_reset(struct tulip_softc *sc)
{
TULIP_WRITE(sc, CSR_GPP, GPP_GPC | 0xfd);
delay(10);
TULIP_WRITE(sc, CSR_GPP, 0xfd);
delay(10);
TULIP_WRITE(sc, CSR_GPP, 0);
}
/*
* SMC 9332DST media switch.
*/
static void tlp_smc9332dst_tmsw_init(struct tulip_softc *);
static const struct tulip_mediasw tlp_smc9332dst_mediasw = {
tlp_smc9332dst_tmsw_init,
tlp_21140_gpio_get,
tlp_21140_gpio_set
};
static void
tlp_pci_smc_21140_quirks(struct tulip_pci_softc *psc, const uint8_t *enaddr)
{
struct tulip_softc *sc = &psc->sc_tulip;
strcpy(psc->sc_tulip.sc_name, "SMC 9332DST");
sc->sc_mediasw = &tlp_smc9332dst_mediasw;
}
static void
tlp_smc9332dst_tmsw_init(struct tulip_softc *sc)
{
struct tulip_21x4x_media *tm;
struct mii_data *mii = &sc->sc_mii;
const char *sep = "";
uint32_t reg;
int i, cnt;
sc->sc_gp_dir = GPP_SMC9332DST_PINS;
sc->sc_opmode = OPMODE_MBO | OPMODE_PS;
TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode);
ifmedia_init(&mii->mii_media, 0, tlp_mediachange, tlp_mediastatus);
aprint_normal_dev(sc->sc_dev, "");
#define ADD(m, c) \
tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK | M_ZERO); \
tm->tm_opmode = (c); \
tm->tm_gpdata = GPP_SMC9332DST_INIT; \
ifmedia_add(&mii->mii_media, (m), 0, tm)
#define PRINT(str) aprint_normal("%s%s", sep, str); sep = ", "
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, 0, 0), OPMODE_TTM);
PRINT("10baseT");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_10_T, IFM_FDX, 0),
OPMODE_TTM | OPMODE_FD);
PRINT("10baseT-FDX");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, 0, 0),
OPMODE_PS | OPMODE_PCS | OPMODE_SCR);
PRINT("100baseTX");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_FDX, 0),
OPMODE_PS | OPMODE_PCS | OPMODE_SCR | OPMODE_FD);
PRINT("100baseTX-FDX");
#undef ADD
#undef PRINT
aprint_normal("\n");
tlp_reset(sc);
TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode | OPMODE_PCS | OPMODE_SCR);
TULIP_WRITE(sc, CSR_GPP, GPP_GPC | sc->sc_gp_dir);
delay(10);
TULIP_WRITE(sc, CSR_GPP, GPP_SMC9332DST_INIT);
delay(200000);
cnt = 0;
for (i = 1000; i > 0; i--) {
reg = TULIP_READ(sc, CSR_GPP);
if ((~reg & (GPP_SMC9332DST_OK10 |
GPP_SMC9332DST_OK100)) == 0) {
if (cnt++ > 100) {
break;
}
} else if ((reg & GPP_SMC9332DST_OK10) == 0) {
break;
} else {
cnt = 0;
}
delay(1000);
}
if (cnt > 100)
ifmedia_set(&mii->mii_media, IFM_ETHER | IFM_100_TX);
else
ifmedia_set(&mii->mii_media, IFM_ETHER | IFM_10_T);
}
static void
tlp_pci_vpc_21140_quirks(struct tulip_pci_softc *psc, const uint8_t *enaddr)
{
struct tulip_softc *sc = &psc->sc_tulip;
char *p1 = (char *)&sc->sc_srom[32];
char *p2 = &sc->sc_name[0];
do {
if ((unsigned char) *p1 & 0x80)
*p2++ = ' ';
else
*p2++ = *p1;
} while (*p1++);
}
static void tlp_pci_cobalt_21142_reset(struct tulip_softc *);
static void
tlp_pci_cobalt_21142_quirks(struct tulip_pci_softc *psc, const uint8_t *enaddr)
{
struct tulip_softc *sc = &psc->sc_tulip;
/*
* Cobalt Networks interfaces are just MII-on-SIO.
*/
sc->sc_reset = tlp_pci_cobalt_21142_reset;
sc->sc_mediasw = &tlp_sio_mii_mediasw;
/*
* The Cobalt systems tend to fall back to store-and-forward
* pretty quickly, so we select that from the beginning to
* avoid initial timeouts.
*/
sc->sc_txthresh = TXTH_SF;
}
static void
tlp_pci_cobalt_21142_reset(struct tulip_softc *sc)
{
/*
* Reset PHY.
*/
TULIP_WRITE(sc, CSR_SIAGEN, SIAGEN_CWE | (1 << 16));
delay(10);
TULIP_WRITE(sc, CSR_SIAGEN, SIAGEN_CWE);
delay(10);
}
static void
tlp_pci_algor_21142_quirks(struct tulip_pci_softc *psc, const uint8_t *enaddr)
{
struct tulip_softc *sc = &psc->sc_tulip;
/*
* Algorithmics boards just have MII-on-SIO.
*
* XXX They also have AUI on the serial interface.
* XXX Deal with this.
*/
sc->sc_mediasw = &tlp_sio_mii_mediasw;
}
/*
* Cogent EM1x0 (aka. Adaptec ANA-6910) media switch.
*/
static void tlp_cogent_em1x0_tmsw_init(struct tulip_softc *);
static const struct tulip_mediasw tlp_cogent_em1x0_mediasw = {
tlp_cogent_em1x0_tmsw_init,
tlp_21140_gpio_get,
tlp_21140_gpio_set
};
static void
tlp_pci_adaptec_quirks(struct tulip_pci_softc *psc, const uint8_t *enaddr)
{
struct tulip_softc *sc = &psc->sc_tulip;
uint8_t *srom = sc->sc_srom, id0;
uint16_t id1, id2;
if (sc->sc_mediasw == NULL) {
id0 = srom[32];
switch (id0) {
case 0x12:
strcpy(psc->sc_tulip.sc_name, "Cogent EM100TX");
sc->sc_mediasw = &tlp_cogent_em1x0_mediasw;
break;
case 0x13:
strcpy(psc->sc_tulip.sc_name, "Cogent ???");
sc->sc_mediasw = &tlp_cogent_em1x0_mediasw;
psc->sc_flags |= TULIP_PCI_SHAREDINTR |
TULIP_PCI_SHAREDROM;
break;
case 0x15:
strcpy(psc->sc_tulip.sc_name, "Cogent EM100FX");
sc->sc_mediasw = &tlp_cogent_em1x0_mediasw;
break;
#if 0
case XXX:
strcpy(psc->sc_tulip.sc_name, "Cogent EM110TX");
sc->sc_mediasw = &tlp_cogent_em1x0_mediasw;
break;
#endif
default:
printf("%s: unknown Cogent board ID 0x%02x\n",
device_xname(sc->sc_dev), id0);
}
return;
}
id1 = TULIP_ROM_GETW(srom, 0);
id2 = TULIP_ROM_GETW(srom, 2);
if (id1 != 0x1109) {
goto unknown;
}
switch (id2) {
case 0x1900:
strcpy(psc->sc_tulip.sc_name, "Adaptec ANA-6911");
break;
case 0x2400:
strcpy(psc->sc_tulip.sc_name, "Adaptec ANA-6944A");
psc->sc_flags |= TULIP_PCI_SHAREDINTR | TULIP_PCI_SHAREDROM;
break;
case 0x2b00:
strcpy(psc->sc_tulip.sc_name, "Adaptec ANA-6911A");
break;
case 0x3000:
strcpy(psc->sc_tulip.sc_name, "Adaptec ANA-6922");
psc->sc_flags |= TULIP_PCI_SHAREDINTR | TULIP_PCI_SHAREDROM;
break;
default:
unknown:
printf("%s: unknown Adaptec/Cogent board ID 0x%04x/0x%04x\n",
device_xname(sc->sc_dev), id1, id2);
}
}
static void
tlp_cogent_em1x0_tmsw_init(struct tulip_softc *sc)
{
struct tulip_21x4x_media *tm;
struct mii_data *mii = &sc->sc_mii;
const char *sep = "";
sc->sc_gp_dir = GPP_COGENT_EM1x0_PINS;
sc->sc_opmode = OPMODE_MBO | OPMODE_PS;
TULIP_WRITE(sc, CSR_OPMODE, sc->sc_opmode);
ifmedia_init(&mii->mii_media, 0, tlp_mediachange, tlp_mediastatus);
aprint_normal_dev(sc->sc_dev, "");
#define ADD(m, c) \
tm = malloc(sizeof(*tm), M_DEVBUF, M_WAITOK | M_ZERO); \
tm->tm_opmode = (c); \
tm->tm_gpdata = GPP_COGENT_EM1x0_INIT; \
ifmedia_add(&mii->mii_media, (m), 0, tm)
#define PRINT(str) aprint_normal("%s%s", sep, str); sep = ", "
if (sc->sc_srom[32] == 0x15) {
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_FX, 0, 0),
OPMODE_PS | OPMODE_PCS);
PRINT("100baseFX");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_FX, IFM_FDX, 0),
OPMODE_PS | OPMODE_PCS | OPMODE_FD);
PRINT("100baseFX-FDX");
aprint_normal("\n");
ifmedia_set(&mii->mii_media, IFM_ETHER | IFM_100_FX);
} else {
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, 0, 0),
OPMODE_PS | OPMODE_PCS | OPMODE_SCR);
PRINT("100baseTX");
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_FX, IFM_FDX, 0),
OPMODE_PS | OPMODE_PCS | OPMODE_SCR | OPMODE_FD);
PRINT("100baseTX-FDX");
aprint_normal("\n");
ifmedia_set(&mii->mii_media, IFM_ETHER | IFM_100_TX);
}
#undef ADD
#undef PRINT
}
static void tlp_pci_netwinder_21142_reset(struct tulip_softc *);
static void
tlp_pci_netwinder_21142_quirks(struct tulip_pci_softc *psc,
const uint8_t *enaddr)
{
struct tulip_softc *sc = &psc->sc_tulip;
/*
* Netwinders just use MII-on-SIO.
*/
sc->sc_mediasw = &tlp_sio_mii_mediasw;
sc->sc_reset = tlp_pci_netwinder_21142_reset;
}
void
tlp_pci_netwinder_21142_reset(struct tulip_softc *sc)
{
/*
* Reset the PHY.
*/
TULIP_WRITE(sc, CSR_SIAGEN, 0x0821 << 16);
delay(10);
TULIP_WRITE(sc, CSR_SIAGEN, 0x0000 << 16);
delay(10);
TULIP_WRITE(sc, CSR_SIAGEN, 0x0001 << 16);
delay(10);
}
static void tlp_pci_phobos_21142_reset(struct tulip_softc *);
static void
tlp_pci_phobos_21142_quirks(struct tulip_pci_softc *psc, const uint8_t *enaddr)
{
struct tulip_softc *sc = &psc->sc_tulip;
/*
* Phobos boards just use MII-on-SIO.
*/
sc->sc_mediasw = &tlp_sio_mii_mediasw;
sc->sc_reset = tlp_pci_phobos_21142_reset;
/*
* These boards appear solely on sgimips machines behind a special
* GIO<->PCI ASIC and require the DBO and BLE bits to be set in CSR0.
*/
sc->sc_flags |= (TULIPF_BLE | TULIPF_DBO);
}
static void
tlp_pci_phobos_21142_reset(struct tulip_softc *sc)
{
/*
* Reset PHY.
*/
TULIP_WRITE(sc, CSR_SIAGEN, (0x880f << 16));
delay(10);
TULIP_WRITE(sc, CSR_SIAGEN, (0x800f << 16));
delay(10);
}
Reference in New Issue View Git Blame Copy Permalink