NetBSD/sys/dev/pci/if_bcereg.h

157 lines
6.0 KiB
C

/* $NetBSD: if_bcereg.h,v 1.5 2019/10/18 23:08:29 msaitoh Exp $ */
/*
* Copyright (c) 2003 Clifford Wright. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/* Broadcom BCM440x */
/* PCI registers defined in the PCI 2.2 spec. */
#define BCE_PCI_BAR0 0x10
/* Sonics SB register access */
#define BCE_REG_WIN 0x80
#define BCE_SONICS_WIN 0x18002000
/* Sonics PCI control */
#define BCE_SPCI_TR2 0x0108 /* Sonics to PCI translation
* 2 */
/* bit defines */
#define SBTOPCI_PREF 0x4 /* prefetch enable */
#define SBTOPCI_BURST 0x8 /* burst enable */
#define BCE_SBINTVEC 0x0f94
/* interrupt bits */
#define SBIV_ENET0 0x02 /* enable for enet 0 */
#define SBIV_ENET1 0x40 /* enable for enet 1 */
/* Host Interface Registers */
#define BCE_DEVCTL 0x0000 /* device control */
/* device control bits */
#define BCE_DC_IP 0x00000400 /* internal phy present */
#define BCE_DC_ER 0x00008000 /* ephy reset */
/* Interrupt Control */
#define BCE_INT_STS 0x0020
#define BCE_INT_MASK 0x0024
/* bits for both status, and mask */
#define I_TO 0x00000080 /* general timeout */
#define I_PC 0x00000400 /* descriptor error */
#define I_PD 0x00000800 /* data error */
#define I_DE 0x00001000 /* desc. protocol error */
#define I_RU 0x00002000 /* rx desc. underflow */
#define I_RO 0x00004000 /* rx fifo overflow */
#define I_XU 0x00008000 /* tx fifo underflow */
#define I_RI 0x00010000 /* receive interrupt */
#define I_XI 0x01000000 /* transmit interrupt */
/* Ethernet MAC Control */
#define BCE_MACCTL 0x00A8 /* ethernet mac control */
/* mac control bits */
#define BCE_EMC_CRC32_ENAB 0x00000001 /* crc32 generation */
#define BCE_EMC_PDOWN 0x00000004 /* PHY powerdown */
#define BCE_EMC_EDET 0x00000008 /* PHY energy detect */
#define BCE_EMC_LED 0x000000e0 /* PHY LED control */
/* DMA Interrupt control */
#define BCE_DMAI_CTL 0x0100
/* DMA registers */
#define BCE_DMA_TXCTL 0x0200 /* transmit control */
/* transmit control bits */
#define XC_XE 0x1 /* transmit enable */
#define XC_LE 0x4 /* loopback enable */
#define BCE_DMA_TXADDR 0x0204 /* tx ring base address */
#define BCE_DMA_DPTR 0x0208 /* last tx descriptor */
#define BCE_DMA_TXSTATUS 0x020C /* active desc, etc */
#define BCE_DMA_RXCTL 0x0210 /* enable, etc */
#define BCE_DMA_RXADDR 0x0214 /* rx ring base address */
#define BCE_DMA_RXDPTR 0x0218 /* last descriptor */
#define BCE_DMA_RXSTATUS 0x021C /* active desc, etc */
/* receive status bits */
#define RS_CD_MASK 0x0fff /* current descriptor pointer */
#define RS_DMA_IDLE 0x2000 /* DMA is idle */
#define RS_ERROR 0xf0000 /* had an error */
/* Ethernet MAC control registers */
#define BCE_RX_CTL 0x0400 /* receive config */
/* config bits */
#define ERC_DB 0x00000001 /* disable broadcast */
#define ERC_AM 0x00000002 /* rx all multicast */
#define ERC_PE 0x00000008 /* promiscuous enable */
#define BCE_RX_MAX 0x0404 /* max packet length */
#define BCE_TX_MAX 0x0408
#define BCE_MI_CTL 0x0410
#define BCE_MI_COMM 0x0414
#define BCE_MI_STS 0x041C
/* mii status bits */
#define BCE_MIINTR 0x00000001 /* mii mdio interrupt */
#define BCE_FILT_LOW 0x0420 /* mac low 4 bytes */
#define BCE_FILT_HI 0x0424 /* mac hi 2 bytes */
#define BCE_FILT_CTL 0x0428 /* packet filter ctrl */
#define BCE_ENET_CTL 0x042C
/* bits for mac control */
#define EC_EE 0x00000001 /* emac enable */
#define EC_ED 0x00000002 /* disable emac */
#define EC_ES 0x00000004 /* soft reset emac */
#define EC_EP 0x00000008 /* external phy */
#define BCE_TX_CTL 0x0430
/* bits for transmit control */
#define EXC_FD 0x00000001 /* full duplex */
#define BCE_TX_WATER 0x0434 /* tx watermark */
/* statistics counters */
#define BCE_RX_PKTS 0x058C
/* SiliconBackplane registers */
#define BCE_SBIMSTATE 0x0f90
#define BCE_SBTMSTATELOW 0x0f98
#define BCE_SBTMSTATEHI 0x0f9C
#define SBTML_RESET 0x1 /* reset */
#define SBTML_REJ 0x2 /* reject */
#define SBTML_CLK 0x10000 /* clock enable */
#define SBTML_FGC 0x20000 /* force gated clocks on */
/* MI communication register */
#define BCE_MICOMM_DATA 0x0000FFFF
#define BCE_MIREG(x) ((x & 0x1F) << 18)
#define BCE_MIPHY(x) ((x & 0x1F) << 23)
/* Magic constants.... */
#define BCE_MAGIC_PHYEMAC_BASE 0x1000
#define BCE_MAGIC_PHY (BCE_MAGIC_PHYEMAC_BASE + 90)
#define BCE_MAGIC_ENET0 (BCE_MAGIC_PHYEMAC_BASE + 79)
#define BCE_MAGIC_ENET1 (BCE_MAGIC_PHYEMAC_BASE + 78)
#define BCE_MAGIC_ENET2 (BCE_MAGIC_PHYEMAC_BASE + 81)
#define BCE_MAGIC_ENET3 (BCE_MAGIC_PHYEMAC_BASE + 80)
#define BCE_MAGIC_ENET4 (BCE_MAGIC_PHYEMAC_BASE + 83)
#define BCE_MAGIC_ENET5 (BCE_MAGIC_PHYEMAC_BASE + 82)
#define SBIM_MAGIC_ERRORBITS 0x60000