3cac59ee4f
deal with dynamic address modifier generation based on the CPU's function code pins. Also implement VMEbus slave mode for mvme147. (Not yet 100% working.)
194 lines
6.7 KiB
C
194 lines
6.7 KiB
C
/* $NetBSD: pccreg.h,v 1.7 2000/08/20 21:51:31 scw Exp $ */
|
|
|
|
/*
|
|
*
|
|
* Copyright (c) 1995 Charles D. Cranor
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Charles D. Cranor.
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* peripheral channel controller on mvme147
|
|
*/
|
|
#ifndef __MVME68K_PCCREG_H
|
|
#define __MVME68K_PCCREG_H
|
|
|
|
/*
|
|
* Offsets to the MVME147's onboard device registers.
|
|
* (Relative to the bus_space_tag_t passed in from 'mainbus')
|
|
*/
|
|
#define PCC_NVRAM_OFF 0x0000 /* offset of Mostek NVRAM/RTC chip */
|
|
#define PCC_RTC_OFF 0x07f8 /* offset of clock registers NVRAM */
|
|
#define PCC_REG_OFF 0x1000 /* offset of PCC chip registers */
|
|
#define PCC_LE_OFF 0x1800 /* offset of LANCE ethernet chip */
|
|
#define PCC_VME_OFF 0x2000 /* offset of VME chip */
|
|
#define PCC_LPT_OFF 0x2800 /* offset of parallel port register */
|
|
#define PCC_ZS0_OFF 0x3000 /* offset of first 8530 UART */
|
|
#define PCC_ZS1_OFF 0x3800 /* offset of second 8530 UART */
|
|
#define PCC_WDSC_OFF 0x4000 /* offset of 33c93 SCSI chip */
|
|
|
|
/*
|
|
* This is needed to figure out the boot device.
|
|
* (The physical address of the boot device's registers are passed in
|
|
* from the Boot ROM)
|
|
*/
|
|
#define PCC_PADDR(off) ((void *)(0xfffe0000u + (off)))
|
|
|
|
/*
|
|
* The PCC chip's own registers. These are 8-bits wide, unless
|
|
* otherwise indicated.
|
|
*/
|
|
#define PCCREG_DMA_TABLE_ADDR 0x00 /* DMA table address (32-bit) */
|
|
#define PCCREG_DMA_DATA_ADDR 0x04 /* DMA data address (32-bit) */
|
|
#define PCCREG_DMA_BYTE_COUNT 0x08 /* DMA byte count (32-bit) */
|
|
#define PCCREG_DMA_DATA_HOLD 0x0c /* DMA data hold register (32-bit) */
|
|
#define PCCREG_TMR1_PRELOAD 0x10 /* Timer1 preload (16-bit) */
|
|
#define PCCREG_TMR1_COUNT 0x12 /* Timer1 count (16-bit) */
|
|
#define PCCREG_TMR2_PRELOAD 0x14 /* Timer2 preload (16-bit) */
|
|
#define PCCREG_TMR2_COUNT 0x16 /* Timer2 count (16-bit) */
|
|
#define PCCREG_TMR1_INTR_CTRL 0x18 /* Timer1 interrupt ctrl */
|
|
#define PCCREG_TMR1_CONTROL 0x19 /* Timer1 ctrl reg */
|
|
#define PCCREG_TMR2_INTR_CTRL 0x1a /* Timer2 interrupt ctrl */
|
|
#define PCCREG_TMR2_CONTROL 0x1b /* Timer2 ctrl reg */
|
|
#define PCCREG_ACFAIL_INTR_CTRL 0x1c /* ACFAIL intr reg */
|
|
#define PCCREG_WDOG_INTR_CTRL 0x1d /* Watchdog intr reg */
|
|
#define PCCREG_PRNT_INTR_CTRL 0x1e /* Printer intr reg */
|
|
#define PCCREG_PRNT_CONTROL 0x1f /* Printer ctrl */
|
|
#define PCCREG_DMA_INTR_CTRL 0x20 /* DMA interrupt control */
|
|
#define PCCREG_DMA_CONTROL 0x21 /* DMA csr */
|
|
#define PCCREG_BUSERR_INTR_CTRL 0x22 /* Bus error interrupt */
|
|
#define PCCREG_DMA_STATUS 0x23 /* DMA status register */
|
|
#define PCCREG_ABORT_INTR_CTRL 0x24 /* ABORT interrupt control reg */
|
|
#define PCCREG_TABLE_ADDR_FC 0x25 /* Table address function code reg */
|
|
#define PCCREG_SERIAL_INTR_CTRL 0x26 /* Serial interrupt reg */
|
|
#define PCCREG_GENERAL_CONTROL 0x27 /* General control register */
|
|
#define PCCREG_LANCE_INTR_CTRL 0x28 /* Ethernet interrupt */
|
|
#define PCCREG_GENERAL_STATUS 0x29 /* General status */
|
|
#define PCCREG_SCSI_INTR_CTRL 0x2a /* SCSI interrupt reg */
|
|
#define PCCREG_SLAVE_BASE_ADDR 0x2b /* Slave base addr reg */
|
|
#define PCCREG_SOFT1_INTR_CTRL 0x2c /* Software interrupt #1 cr */
|
|
#define PCCREG_VECTOR_BASE 0x2d /* Interrupt base vector register */
|
|
#define PCCREG_SOFT2_INTR_CTRL 0x2e /* Software interrupt #2 cr */
|
|
#define PCCREG_REVISION 0x2f /* Revision level */
|
|
|
|
#define PCCREG_SIZE 0x30
|
|
|
|
/*
|
|
* Convenience macros for reading the PCC chip's registers
|
|
* through bus_space.
|
|
*/
|
|
#define pcc_reg_read(sc,r) \
|
|
bus_space_read_1((sc)->sc_bust, (sc)->sc_bush, (r))
|
|
#define pcc_reg_read16(sc,r) \
|
|
bus_space_read_2((sc)->sc_bust, (sc)->sc_bush, (r))
|
|
#define pcc_reg_read32(sc,r) \
|
|
bus_space_read_4((sc)->sc_bust, (sc)->sc_bush, (r))
|
|
#define pcc_reg_write(sc,r,v) \
|
|
bus_space_write_1((sc)->sc_bust, (sc)->sc_bush, (r), (v))
|
|
#define pcc_reg_write16(sc,r,v) \
|
|
bus_space_write_2((sc)->sc_bust, (sc)->sc_bush, (r), (v))
|
|
#define pcc_reg_write32(sc,r,v) \
|
|
bus_space_write_4((sc)->sc_bust, (sc)->sc_bush, (r), (v))
|
|
|
|
|
|
/*
|
|
* we lock off our interrupt vector at 0x40.
|
|
*/
|
|
|
|
#define PCC_VECBASE 0x40
|
|
#define PCC_NVEC 12
|
|
|
|
/*
|
|
* vectors we use
|
|
*/
|
|
|
|
#define PCCV_ACFAIL 0
|
|
#define PCCV_BERR 1
|
|
#define PCCV_ABORT 2
|
|
#define PCCV_ZS 3
|
|
#define PCCV_LE 4
|
|
#define PCCV_SCSI 5
|
|
#define PCCV_DMA 6
|
|
#define PCCV_PRINTER 7
|
|
#define PCCV_TIMER1 8
|
|
#define PCCV_TIMER2 9
|
|
#define PCCV_SOFT1 10
|
|
#define PCCV_SOFT2 11
|
|
|
|
/*
|
|
* enable interrupt
|
|
*/
|
|
|
|
#define PCC_ICLEAR 0x80
|
|
#define PCC_IENABLE 0x08
|
|
|
|
/*
|
|
* interrupt mask
|
|
*/
|
|
|
|
#define PCC_IMASK 0x7
|
|
|
|
/*
|
|
* clock/timer
|
|
*/
|
|
|
|
#define PCC_TIMERACK 0x80 /* ack intr */
|
|
#define PCC_TIMER100HZ 63936 /* load value for 100Hz */
|
|
#define PCC_TIMERCLEAR 0x0 /* reset and clear timer */
|
|
#define PCC_TIMERSTOP 0x1 /* stop clock, but don't clear it */
|
|
#define PCC_TIMERSTART 0x3 /* start timer */
|
|
|
|
#define pcc_timer_hz2lim(hz) (65536 - (160000/(hz)))
|
|
#define pcc_timer_us2lim(us) (65536 - (160000/(1000000/(us))))
|
|
|
|
/*
|
|
* serial control
|
|
*/
|
|
|
|
#define PCC_ZSEXTERN 0x10 /* let PCC supply vector */
|
|
|
|
/*
|
|
* abort switch
|
|
*/
|
|
|
|
#define PCC_ABORT_IEN 0x08 /* enable interrupt */
|
|
#define PCC_ABORT_ABS 0x40 /* current state of switch */
|
|
#define PCC_ABORT_ACK 0x80 /* interrupt active; write to ack */
|
|
|
|
/*
|
|
* general control register
|
|
*/
|
|
|
|
#define PCC_GENCR_IEN 0x10 /* global interrupt enable */
|
|
|
|
/*
|
|
* slave base address register
|
|
*/
|
|
#define PCC_SLAVE_BASE_MASK (0x01fu)
|
|
|
|
#endif /* __MVME68K_PCCREG_H */
|