1746 lines
44 KiB
C
1746 lines
44 KiB
C
/* $NetBSD: if_aue.c,v 1.76 2002/06/25 01:07:38 nathanw Exp $ */
|
|
/*
|
|
* Copyright (c) 1997, 1998, 1999, 2000
|
|
* Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD: src/sys/dev/usb/if_aue.c,v 1.11 2000/01/14 01:36:14 wpaul Exp $
|
|
*/
|
|
|
|
/*
|
|
* ADMtek AN986 Pegasus and AN8511 Pegasus II USB to ethernet driver.
|
|
* Datasheet is available from http://www.admtek.com.tw.
|
|
*
|
|
* Written by Bill Paul <wpaul@ee.columbia.edu>
|
|
* Electrical Engineering Department
|
|
* Columbia University, New York City
|
|
*/
|
|
|
|
/*
|
|
* The Pegasus chip uses four USB "endpoints" to provide 10/100 ethernet
|
|
* support: the control endpoint for reading/writing registers, burst
|
|
* read endpoint for packet reception, burst write for packet transmission
|
|
* and one for "interrupts." The chip uses the same RX filter scheme
|
|
* as the other ADMtek ethernet parts: one perfect filter entry for the
|
|
* the station address and a 64-bit multicast hash table. The chip supports
|
|
* both MII and HomePNA attachments.
|
|
*
|
|
* Since the maximum data transfer speed of USB is supposed to be 12Mbps,
|
|
* you're never really going to get 100Mbps speeds from this device. I
|
|
* think the idea is to allow the device to connect to 10 or 100Mbps
|
|
* networks, not necessarily to provide 100Mbps performance. Also, since
|
|
* the controller uses an external PHY chip, it's possible that board
|
|
* designers might simply choose a 10Mbps PHY.
|
|
*
|
|
* Registers are accessed using usbd_do_request(). Packet transfers are
|
|
* done using usbd_transfer() and friends.
|
|
*/
|
|
|
|
/*
|
|
* Ported to NetBSD and somewhat rewritten by Lennart Augustsson.
|
|
*/
|
|
|
|
/*
|
|
* TODO:
|
|
* better error messages from rxstat
|
|
* split out if_auevar.h
|
|
* add thread to avoid register reads from interrupt context
|
|
* more error checks
|
|
* investigate short rx problem
|
|
* proper cleanup on errors
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: if_aue.c,v 1.76 2002/06/25 01:07:38 nathanw Exp $");
|
|
|
|
#if defined(__NetBSD__)
|
|
#include "opt_inet.h"
|
|
#include "opt_ns.h"
|
|
#include "bpfilter.h"
|
|
#include "rnd.h"
|
|
#elif defined(__OpenBSD__)
|
|
#include "bpfilter.h"
|
|
#endif /* defined(__OpenBSD__) */
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
|
|
#include <sys/device.h>
|
|
#if NRND > 0
|
|
#include <sys/rnd.h>
|
|
#endif
|
|
|
|
#include <net/if.h>
|
|
#if defined(__NetBSD__)
|
|
#include <net/if_arp.h>
|
|
#endif
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
|
|
#define BPF_MTAP(ifp, m) bpf_mtap((ifp)->if_bpf, (m))
|
|
|
|
#if NBPFILTER > 0
|
|
#include <net/bpf.h>
|
|
#endif
|
|
|
|
#if defined(__NetBSD__)
|
|
#include <net/if_ether.h>
|
|
#ifdef INET
|
|
#include <netinet/in.h>
|
|
#include <netinet/if_inarp.h>
|
|
#endif
|
|
#endif /* defined(__NetBSD__) */
|
|
|
|
#if defined(__OpenBSD__)
|
|
#ifdef INET
|
|
#include <netinet/in.h>
|
|
#include <netinet/in_systm.h>
|
|
#include <netinet/in_var.h>
|
|
#include <netinet/ip.h>
|
|
#include <netinet/if_ether.h>
|
|
#endif
|
|
#endif /* defined(__OpenBSD__) */
|
|
|
|
#ifdef NS
|
|
#include <netns/ns.h>
|
|
#include <netns/ns_if.h>
|
|
#endif
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdi.h>
|
|
#include <dev/usb/usbdi_util.h>
|
|
#include <dev/usb/usbdevs.h>
|
|
|
|
#include <dev/usb/if_auereg.h>
|
|
|
|
#ifdef AUE_DEBUG
|
|
#define DPRINTF(x) if (auedebug) logprintf x
|
|
#define DPRINTFN(n,x) if (auedebug >= (n)) logprintf x
|
|
int auedebug = 0;
|
|
#else
|
|
#define DPRINTF(x)
|
|
#define DPRINTFN(n,x)
|
|
#endif
|
|
|
|
/*
|
|
* Various supported device vendors/products.
|
|
*/
|
|
struct aue_type {
|
|
struct usb_devno aue_dev;
|
|
u_int16_t aue_flags;
|
|
#define LSYS 0x0001 /* use Linksys reset */
|
|
#define PNA 0x0002 /* has Home PNA */
|
|
#define PII 0x0004 /* Pegasus II chip */
|
|
};
|
|
|
|
Static const struct aue_type aue_devs[] = {
|
|
{{ USB_VENDOR_3COM, USB_PRODUCT_3COM_3C460B}, PII },
|
|
{{ USB_VENDOR_ABOCOM, USB_PRODUCT_ABOCOM_XX1}, PNA|PII },
|
|
{{ USB_VENDOR_ABOCOM, USB_PRODUCT_ABOCOM_XX2}, PII },
|
|
{{ USB_VENDOR_ABOCOM, USB_PRODUCT_ABOCOM_UFE1000}, LSYS },
|
|
{{ USB_VENDOR_ABOCOM, USB_PRODUCT_ABOCOM_XX4}, PNA },
|
|
{{ USB_VENDOR_ABOCOM, USB_PRODUCT_ABOCOM_XX5}, PNA },
|
|
{{ USB_VENDOR_ABOCOM, USB_PRODUCT_ABOCOM_XX6}, PII },
|
|
{{ USB_VENDOR_ABOCOM, USB_PRODUCT_ABOCOM_XX7}, PII },
|
|
{{ USB_VENDOR_ABOCOM, USB_PRODUCT_ABOCOM_XX8}, PII },
|
|
{{ USB_VENDOR_ABOCOM, USB_PRODUCT_ABOCOM_XX9}, PNA },
|
|
{{ USB_VENDOR_ABOCOM, USB_PRODUCT_ABOCOM_XX10}, 0 },
|
|
{{ USB_VENDOR_ABOCOM, USB_PRODUCT_ABOCOM_DSB650TX_PNA}, 0 },
|
|
{{ USB_VENDOR_ACCTON, USB_PRODUCT_ACCTON_USB320_EC}, 0 },
|
|
{{ USB_VENDOR_ACCTON, USB_PRODUCT_ACCTON_SS1001}, PII },
|
|
{{ USB_VENDOR_ADMTEK, USB_PRODUCT_ADMTEK_PEGASUS}, PNA },
|
|
{{ USB_VENDOR_ADMTEK, USB_PRODUCT_ADMTEK_PEGASUSII}, PII },
|
|
{{ USB_VENDOR_BILLIONTON, USB_PRODUCT_BILLIONTON_USB100}, 0 },
|
|
{{ USB_VENDOR_BILLIONTON, USB_PRODUCT_BILLIONTON_USBLP100}, PNA },
|
|
{{ USB_VENDOR_BILLIONTON, USB_PRODUCT_BILLIONTON_USBEL100}, 0 },
|
|
{{ USB_VENDOR_BILLIONTON, USB_PRODUCT_BILLIONTON_USBE100}, PII },
|
|
{{ USB_VENDOR_COREGA, USB_PRODUCT_COREGA_FETHER_USB_TX}, 0 },
|
|
{{ USB_VENDOR_COREGA, USB_PRODUCT_COREGA_FETHER_USB_TXS},PII },
|
|
{{ USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650TX4}, LSYS|PII },
|
|
{{ USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650TX1}, LSYS },
|
|
{{ USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650TX}, LSYS },
|
|
{{ USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650TX_PNA}, PNA },
|
|
{{ USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650TX3}, LSYS|PII },
|
|
{{ USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650TX2}, LSYS|PII },
|
|
{{ USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650}, 0 },
|
|
{{ USB_VENDOR_ELECOM, USB_PRODUCT_ELECOM_LDUSBTX0}, 0 },
|
|
{{ USB_VENDOR_ELECOM, USB_PRODUCT_ELECOM_LDUSBTX1}, 0 },
|
|
{{ USB_VENDOR_ELECOM, USB_PRODUCT_ELECOM_LDUSBTX2}, 0 },
|
|
{{ USB_VENDOR_ELECOM, USB_PRODUCT_ELECOM_LDUSBTX3}, PII },
|
|
{{ USB_VENDOR_ELECOM, USB_PRODUCT_ELECOM_LDUSBLTX}, PII },
|
|
{{ USB_VENDOR_ELSA, USB_PRODUCT_ELSA_USB2ETHERNET}, 0 },
|
|
{{ USB_VENDOR_IODATA, USB_PRODUCT_IODATA_USBETTX}, 0 },
|
|
{{ USB_VENDOR_IODATA, USB_PRODUCT_IODATA_USBETTXS}, PII },
|
|
{{ USB_VENDOR_KINGSTON, USB_PRODUCT_KINGSTON_KNU101TX}, 0 },
|
|
{{ USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB10TX1}, LSYS|PII },
|
|
{{ USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB10T}, LSYS },
|
|
{{ USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB100TX}, LSYS },
|
|
{{ USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB100H1}, LSYS|PNA },
|
|
{{ USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB10TA}, LSYS },
|
|
{{ USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB10TX2}, LSYS|PII },
|
|
{{ USB_VENDOR_MELCO, USB_PRODUCT_MELCO_LUATX1}, 0 },
|
|
{{ USB_VENDOR_MELCO, USB_PRODUCT_MELCO_LUATX5}, 0 },
|
|
{{ USB_VENDOR_MELCO, USB_PRODUCT_MELCO_LUA2TX5}, PII },
|
|
{{ USB_VENDOR_SIEMENS, USB_PRODUCT_SIEMENS_SPEEDSTREAM}, PII },
|
|
{{ USB_VENDOR_SMARTBRIDGES, USB_PRODUCT_SMARTBRIDGES_SMARTNIC},PII },
|
|
{{ USB_VENDOR_SMC, USB_PRODUCT_SMC_2202USB}, 0 },
|
|
{{ USB_VENDOR_SOHOWARE, USB_PRODUCT_SOHOWARE_NUB100}, 0 },
|
|
};
|
|
#define aue_lookup(v, p) ((struct aue_type *)usb_lookup(aue_devs, v, p))
|
|
|
|
USB_DECLARE_DRIVER(aue);
|
|
|
|
Static void aue_reset_pegasus_II(struct aue_softc *sc);
|
|
Static int aue_tx_list_init(struct aue_softc *);
|
|
Static int aue_rx_list_init(struct aue_softc *);
|
|
Static int aue_newbuf(struct aue_softc *, struct aue_chain *, struct mbuf *);
|
|
Static int aue_send(struct aue_softc *, struct mbuf *, int);
|
|
Static void aue_intr(usbd_xfer_handle, usbd_private_handle, usbd_status);
|
|
Static void aue_rxeof(usbd_xfer_handle, usbd_private_handle, usbd_status);
|
|
Static void aue_txeof(usbd_xfer_handle, usbd_private_handle, usbd_status);
|
|
Static void aue_tick(void *);
|
|
Static void aue_tick_task(void *);
|
|
Static void aue_start(struct ifnet *);
|
|
Static int aue_ioctl(struct ifnet *, u_long, caddr_t);
|
|
Static void aue_init(void *);
|
|
Static void aue_stop(struct aue_softc *);
|
|
Static void aue_watchdog(struct ifnet *);
|
|
Static int aue_openpipes(struct aue_softc *);
|
|
Static int aue_ifmedia_upd(struct ifnet *);
|
|
Static void aue_ifmedia_sts(struct ifnet *, struct ifmediareq *);
|
|
|
|
Static int aue_eeprom_getword(struct aue_softc *, int);
|
|
Static void aue_read_mac(struct aue_softc *, u_char *);
|
|
Static int aue_miibus_readreg(device_ptr_t, int, int);
|
|
Static void aue_miibus_writereg(device_ptr_t, int, int, int);
|
|
Static void aue_miibus_statchg(device_ptr_t);
|
|
|
|
Static void aue_lock_mii(struct aue_softc *);
|
|
Static void aue_unlock_mii(struct aue_softc *);
|
|
|
|
Static void aue_setmulti(struct aue_softc *);
|
|
Static u_int32_t aue_crc(caddr_t);
|
|
Static void aue_reset(struct aue_softc *);
|
|
|
|
Static int aue_csr_read_1(struct aue_softc *, int);
|
|
Static int aue_csr_write_1(struct aue_softc *, int, int);
|
|
Static int aue_csr_read_2(struct aue_softc *, int);
|
|
Static int aue_csr_write_2(struct aue_softc *, int, int);
|
|
|
|
#define AUE_SETBIT(sc, reg, x) \
|
|
aue_csr_write_1(sc, reg, aue_csr_read_1(sc, reg) | (x))
|
|
|
|
#define AUE_CLRBIT(sc, reg, x) \
|
|
aue_csr_write_1(sc, reg, aue_csr_read_1(sc, reg) & ~(x))
|
|
|
|
Static int
|
|
aue_csr_read_1(struct aue_softc *sc, int reg)
|
|
{
|
|
usb_device_request_t req;
|
|
usbd_status err;
|
|
uByte val = 0;
|
|
|
|
if (sc->aue_dying)
|
|
return (0);
|
|
|
|
req.bmRequestType = UT_READ_VENDOR_DEVICE;
|
|
req.bRequest = AUE_UR_READREG;
|
|
USETW(req.wValue, 0);
|
|
USETW(req.wIndex, reg);
|
|
USETW(req.wLength, 1);
|
|
|
|
err = usbd_do_request(sc->aue_udev, &req, &val);
|
|
|
|
if (err) {
|
|
DPRINTF(("%s: aue_csr_read_1: reg=0x%x err=%s\n",
|
|
USBDEVNAME(sc->aue_dev), reg, usbd_errstr(err)));
|
|
return (0);
|
|
}
|
|
|
|
return (val);
|
|
}
|
|
|
|
Static int
|
|
aue_csr_read_2(struct aue_softc *sc, int reg)
|
|
{
|
|
usb_device_request_t req;
|
|
usbd_status err;
|
|
uWord val;
|
|
|
|
if (sc->aue_dying)
|
|
return (0);
|
|
|
|
req.bmRequestType = UT_READ_VENDOR_DEVICE;
|
|
req.bRequest = AUE_UR_READREG;
|
|
USETW(req.wValue, 0);
|
|
USETW(req.wIndex, reg);
|
|
USETW(req.wLength, 2);
|
|
|
|
err = usbd_do_request(sc->aue_udev, &req, &val);
|
|
|
|
if (err) {
|
|
DPRINTF(("%s: aue_csr_read_2: reg=0x%x err=%s\n",
|
|
USBDEVNAME(sc->aue_dev), reg, usbd_errstr(err)));
|
|
return (0);
|
|
}
|
|
|
|
return (UGETW(val));
|
|
}
|
|
|
|
Static int
|
|
aue_csr_write_1(struct aue_softc *sc, int reg, int aval)
|
|
{
|
|
usb_device_request_t req;
|
|
usbd_status err;
|
|
uByte val;
|
|
|
|
if (sc->aue_dying)
|
|
return (0);
|
|
|
|
val = aval;
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = AUE_UR_WRITEREG;
|
|
USETW(req.wValue, val);
|
|
USETW(req.wIndex, reg);
|
|
USETW(req.wLength, 1);
|
|
|
|
err = usbd_do_request(sc->aue_udev, &req, &val);
|
|
|
|
if (err) {
|
|
DPRINTF(("%s: aue_csr_write_1: reg=0x%x err=%s\n",
|
|
USBDEVNAME(sc->aue_dev), reg, usbd_errstr(err)));
|
|
return (-1);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
Static int
|
|
aue_csr_write_2(struct aue_softc *sc, int reg, int aval)
|
|
{
|
|
usb_device_request_t req;
|
|
usbd_status err;
|
|
uWord val;
|
|
|
|
if (sc->aue_dying)
|
|
return (0);
|
|
|
|
USETW(val, aval);
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = AUE_UR_WRITEREG;
|
|
USETW(req.wValue, aval);
|
|
USETW(req.wIndex, reg);
|
|
USETW(req.wLength, 2);
|
|
|
|
err = usbd_do_request(sc->aue_udev, &req, &val);
|
|
|
|
if (err) {
|
|
DPRINTF(("%s: aue_csr_write_2: reg=0x%x err=%s\n",
|
|
USBDEVNAME(sc->aue_dev), reg, usbd_errstr(err)));
|
|
return (-1);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Read a word of data stored in the EEPROM at address 'addr.'
|
|
*/
|
|
Static int
|
|
aue_eeprom_getword(struct aue_softc *sc, int addr)
|
|
{
|
|
int i;
|
|
|
|
aue_csr_write_1(sc, AUE_EE_REG, addr);
|
|
aue_csr_write_1(sc, AUE_EE_CTL, AUE_EECTL_READ);
|
|
|
|
for (i = 0; i < AUE_TIMEOUT; i++) {
|
|
if (aue_csr_read_1(sc, AUE_EE_CTL) & AUE_EECTL_DONE)
|
|
break;
|
|
}
|
|
|
|
if (i == AUE_TIMEOUT) {
|
|
printf("%s: EEPROM read timed out\n",
|
|
USBDEVNAME(sc->aue_dev));
|
|
}
|
|
|
|
return (aue_csr_read_2(sc, AUE_EE_DATA));
|
|
}
|
|
|
|
/*
|
|
* Read the MAC from the EEPROM. It's at offset 0.
|
|
*/
|
|
Static void
|
|
aue_read_mac(struct aue_softc *sc, u_char *dest)
|
|
{
|
|
int i;
|
|
int off = 0;
|
|
int word;
|
|
|
|
DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__));
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
word = aue_eeprom_getword(sc, off + i);
|
|
dest[2 * i] = (u_char)word;
|
|
dest[2 * i + 1] = (u_char)(word >> 8);
|
|
}
|
|
}
|
|
|
|
/* Get exclusive access to the MII registers */
|
|
Static void
|
|
aue_lock_mii(struct aue_softc *sc)
|
|
{
|
|
sc->aue_refcnt++;
|
|
lockmgr(&sc->aue_mii_lock, LK_EXCLUSIVE, NULL);
|
|
}
|
|
|
|
Static void
|
|
aue_unlock_mii(struct aue_softc *sc)
|
|
{
|
|
lockmgr(&sc->aue_mii_lock, LK_RELEASE, NULL);
|
|
if (--sc->aue_refcnt < 0)
|
|
usb_detach_wakeup(USBDEV(sc->aue_dev));
|
|
}
|
|
|
|
Static int
|
|
aue_miibus_readreg(device_ptr_t dev, int phy, int reg)
|
|
{
|
|
struct aue_softc *sc = USBGETSOFTC(dev);
|
|
int i;
|
|
u_int16_t val;
|
|
|
|
if (sc->aue_dying) {
|
|
#ifdef DIAGNOSTIC
|
|
printf("%s: dying\n", USBDEVNAME(sc->aue_dev));
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#if 0
|
|
/*
|
|
* The Am79C901 HomePNA PHY actually contains
|
|
* two transceivers: a 1Mbps HomePNA PHY and a
|
|
* 10Mbps full/half duplex ethernet PHY with
|
|
* NWAY autoneg. However in the ADMtek adapter,
|
|
* only the 1Mbps PHY is actually connected to
|
|
* anything, so we ignore the 10Mbps one. It
|
|
* happens to be configured for MII address 3,
|
|
* so we filter that out.
|
|
*/
|
|
if (sc->aue_vendor == USB_VENDOR_ADMTEK &&
|
|
sc->aue_product == USB_PRODUCT_ADMTEK_PEGASUS) {
|
|
if (phy == 3)
|
|
return (0);
|
|
}
|
|
#endif
|
|
|
|
aue_lock_mii(sc);
|
|
aue_csr_write_1(sc, AUE_PHY_ADDR, phy);
|
|
aue_csr_write_1(sc, AUE_PHY_CTL, reg | AUE_PHYCTL_READ);
|
|
|
|
for (i = 0; i < AUE_TIMEOUT; i++) {
|
|
if (aue_csr_read_1(sc, AUE_PHY_CTL) & AUE_PHYCTL_DONE)
|
|
break;
|
|
}
|
|
|
|
if (i == AUE_TIMEOUT) {
|
|
printf("%s: MII read timed out\n", USBDEVNAME(sc->aue_dev));
|
|
}
|
|
|
|
val = aue_csr_read_2(sc, AUE_PHY_DATA);
|
|
|
|
DPRINTFN(11,("%s: %s: phy=%d reg=%d => 0x%04x\n",
|
|
USBDEVNAME(sc->aue_dev), __FUNCTION__, phy, reg, val));
|
|
|
|
aue_unlock_mii(sc);
|
|
return (val);
|
|
}
|
|
|
|
Static void
|
|
aue_miibus_writereg(device_ptr_t dev, int phy, int reg, int data)
|
|
{
|
|
struct aue_softc *sc = USBGETSOFTC(dev);
|
|
int i;
|
|
|
|
#if 0
|
|
if (sc->aue_vendor == USB_VENDOR_ADMTEK &&
|
|
sc->aue_product == USB_PRODUCT_ADMTEK_PEGASUS) {
|
|
if (phy == 3)
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
DPRINTFN(11,("%s: %s: phy=%d reg=%d data=0x%04x\n",
|
|
USBDEVNAME(sc->aue_dev), __FUNCTION__, phy, reg, data));
|
|
|
|
aue_lock_mii(sc);
|
|
aue_csr_write_2(sc, AUE_PHY_DATA, data);
|
|
aue_csr_write_1(sc, AUE_PHY_ADDR, phy);
|
|
aue_csr_write_1(sc, AUE_PHY_CTL, reg | AUE_PHYCTL_WRITE);
|
|
|
|
for (i = 0; i < AUE_TIMEOUT; i++) {
|
|
if (aue_csr_read_1(sc, AUE_PHY_CTL) & AUE_PHYCTL_DONE)
|
|
break;
|
|
}
|
|
|
|
if (i == AUE_TIMEOUT) {
|
|
printf("%s: MII read timed out\n",
|
|
USBDEVNAME(sc->aue_dev));
|
|
}
|
|
aue_unlock_mii(sc);
|
|
}
|
|
|
|
Static void
|
|
aue_miibus_statchg(device_ptr_t dev)
|
|
{
|
|
struct aue_softc *sc = USBGETSOFTC(dev);
|
|
struct mii_data *mii = GET_MII(sc);
|
|
|
|
DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__));
|
|
|
|
aue_lock_mii(sc);
|
|
AUE_CLRBIT(sc, AUE_CTL0, AUE_CTL0_RX_ENB | AUE_CTL0_TX_ENB);
|
|
|
|
if (IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX) {
|
|
AUE_SETBIT(sc, AUE_CTL1, AUE_CTL1_SPEEDSEL);
|
|
} else {
|
|
AUE_CLRBIT(sc, AUE_CTL1, AUE_CTL1_SPEEDSEL);
|
|
}
|
|
|
|
if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX)
|
|
AUE_SETBIT(sc, AUE_CTL1, AUE_CTL1_DUPLEX);
|
|
else
|
|
AUE_CLRBIT(sc, AUE_CTL1, AUE_CTL1_DUPLEX);
|
|
|
|
AUE_SETBIT(sc, AUE_CTL0, AUE_CTL0_RX_ENB | AUE_CTL0_TX_ENB);
|
|
aue_unlock_mii(sc);
|
|
|
|
/*
|
|
* Set the LED modes on the LinkSys adapter.
|
|
* This turns on the 'dual link LED' bin in the auxmode
|
|
* register of the Broadcom PHY.
|
|
*/
|
|
if (!sc->aue_dying && (sc->aue_flags & LSYS)) {
|
|
u_int16_t auxmode;
|
|
auxmode = aue_miibus_readreg(dev, 0, 0x1b);
|
|
aue_miibus_writereg(dev, 0, 0x1b, auxmode | 0x04);
|
|
}
|
|
DPRINTFN(5,("%s: %s: exit\n", USBDEVNAME(sc->aue_dev), __FUNCTION__));
|
|
}
|
|
|
|
#define AUE_POLY 0xEDB88320
|
|
#define AUE_BITS 6
|
|
|
|
Static u_int32_t
|
|
aue_crc(caddr_t addr)
|
|
{
|
|
u_int32_t idx, bit, data, crc;
|
|
|
|
/* Compute CRC for the address value. */
|
|
crc = 0xFFFFFFFF; /* initial value */
|
|
|
|
for (idx = 0; idx < 6; idx++) {
|
|
for (data = *addr++, bit = 0; bit < 8; bit++, data >>= 1)
|
|
crc = (crc >> 1) ^ (((crc ^ data) & 1) ? AUE_POLY : 0);
|
|
}
|
|
|
|
return (crc & ((1 << AUE_BITS) - 1));
|
|
}
|
|
|
|
Static void
|
|
aue_setmulti(struct aue_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct ether_multi *enm;
|
|
struct ether_multistep step;
|
|
u_int32_t h = 0, i;
|
|
|
|
DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__));
|
|
|
|
ifp = GET_IFP(sc);
|
|
|
|
if (ifp->if_flags & IFF_PROMISC) {
|
|
allmulti:
|
|
ifp->if_flags |= IFF_ALLMULTI;
|
|
AUE_SETBIT(sc, AUE_CTL0, AUE_CTL0_ALLMULTI);
|
|
return;
|
|
}
|
|
|
|
AUE_CLRBIT(sc, AUE_CTL0, AUE_CTL0_ALLMULTI);
|
|
|
|
/* first, zot all the existing hash bits */
|
|
for (i = 0; i < 8; i++)
|
|
aue_csr_write_1(sc, AUE_MAR0 + i, 0);
|
|
|
|
/* now program new ones */
|
|
#if defined(__NetBSD__)
|
|
ETHER_FIRST_MULTI(step, &sc->aue_ec, enm);
|
|
#else
|
|
ETHER_FIRST_MULTI(step, &sc->arpcom, enm);
|
|
#endif
|
|
while (enm != NULL) {
|
|
if (memcmp(enm->enm_addrlo,
|
|
enm->enm_addrhi, ETHER_ADDR_LEN) != 0)
|
|
goto allmulti;
|
|
|
|
h = aue_crc(enm->enm_addrlo);
|
|
AUE_SETBIT(sc, AUE_MAR + (h >> 3), 1 << (h & 0x7));
|
|
ETHER_NEXT_MULTI(step, enm);
|
|
}
|
|
|
|
ifp->if_flags &= ~IFF_ALLMULTI;
|
|
}
|
|
|
|
Static void
|
|
aue_reset_pegasus_II(struct aue_softc *sc)
|
|
{
|
|
/* Magic constants taken from Linux driver. */
|
|
aue_csr_write_1(sc, AUE_REG_1D, 0);
|
|
aue_csr_write_1(sc, AUE_REG_7B, 2);
|
|
#if 0
|
|
if ((sc->aue_flags & HAS_HOME_PNA) && mii_mode)
|
|
aue_csr_write_1(sc, AUE_REG_81, 6);
|
|
else
|
|
#endif
|
|
aue_csr_write_1(sc, AUE_REG_81, 2);
|
|
}
|
|
|
|
Static void
|
|
aue_reset(struct aue_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
DPRINTFN(2,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__));
|
|
|
|
AUE_SETBIT(sc, AUE_CTL1, AUE_CTL1_RESETMAC);
|
|
|
|
for (i = 0; i < AUE_TIMEOUT; i++) {
|
|
if (!(aue_csr_read_1(sc, AUE_CTL1) & AUE_CTL1_RESETMAC))
|
|
break;
|
|
}
|
|
|
|
if (i == AUE_TIMEOUT)
|
|
printf("%s: reset failed\n", USBDEVNAME(sc->aue_dev));
|
|
|
|
#if 0
|
|
/* XXX what is mii_mode supposed to be */
|
|
if (sc->aue_mii_mode && (sc->aue_flags & PNA))
|
|
aue_csr_write_1(sc, AUE_GPIO1, 0x34);
|
|
else
|
|
aue_csr_write_1(sc, AUE_GPIO1, 0x26);
|
|
#endif
|
|
|
|
/*
|
|
* The PHY(s) attached to the Pegasus chip may be held
|
|
* in reset until we flip on the GPIO outputs. Make sure
|
|
* to set the GPIO pins high so that the PHY(s) will
|
|
* be enabled.
|
|
*
|
|
* Note: We force all of the GPIO pins low first, *then*
|
|
* enable the ones we want.
|
|
*/
|
|
if (sc->aue_flags & LSYS) {
|
|
/* Grrr. LinkSys has to be different from everyone else. */
|
|
aue_csr_write_1(sc, AUE_GPIO0,
|
|
AUE_GPIO_SEL0 | AUE_GPIO_SEL1);
|
|
} else {
|
|
aue_csr_write_1(sc, AUE_GPIO0,
|
|
AUE_GPIO_OUT0 | AUE_GPIO_SEL0);
|
|
}
|
|
aue_csr_write_1(sc, AUE_GPIO0,
|
|
AUE_GPIO_OUT0 | AUE_GPIO_SEL0 | AUE_GPIO_SEL1);
|
|
|
|
if (sc->aue_flags & PII)
|
|
aue_reset_pegasus_II(sc);
|
|
|
|
/* Wait a little while for the chip to get its brains in order. */
|
|
delay(10000); /* XXX */
|
|
}
|
|
|
|
/*
|
|
* Probe for a Pegasus chip.
|
|
*/
|
|
USB_MATCH(aue)
|
|
{
|
|
USB_MATCH_START(aue, uaa);
|
|
|
|
if (uaa->iface != NULL)
|
|
return (UMATCH_NONE);
|
|
|
|
return (aue_lookup(uaa->vendor, uaa->product) != NULL ?
|
|
UMATCH_VENDOR_PRODUCT : UMATCH_NONE);
|
|
}
|
|
|
|
/*
|
|
* Attach the interface. Allocate softc structures, do ifmedia
|
|
* setup and ethernet/BPF attach.
|
|
*/
|
|
USB_ATTACH(aue)
|
|
{
|
|
USB_ATTACH_START(aue, sc, uaa);
|
|
char devinfo[1024];
|
|
int s;
|
|
u_char eaddr[ETHER_ADDR_LEN];
|
|
struct ifnet *ifp;
|
|
struct mii_data *mii;
|
|
usbd_device_handle dev = uaa->device;
|
|
usbd_interface_handle iface;
|
|
usbd_status err;
|
|
usb_interface_descriptor_t *id;
|
|
usb_endpoint_descriptor_t *ed;
|
|
int i;
|
|
|
|
DPRINTFN(5,(" : aue_attach: sc=%p", sc));
|
|
|
|
usbd_devinfo(dev, 0, devinfo);
|
|
USB_ATTACH_SETUP;
|
|
printf("%s: %s\n", USBDEVNAME(sc->aue_dev), devinfo);
|
|
|
|
err = usbd_set_config_no(dev, AUE_CONFIG_NO, 1);
|
|
if (err) {
|
|
printf("%s: setting config no failed\n",
|
|
USBDEVNAME(sc->aue_dev));
|
|
USB_ATTACH_ERROR_RETURN;
|
|
}
|
|
|
|
usb_init_task(&sc->aue_tick_task, aue_tick_task, sc);
|
|
usb_init_task(&sc->aue_stop_task, (void (*)(void *))aue_stop, sc);
|
|
lockinit(&sc->aue_mii_lock, PZERO, "auemii", 0, 0);
|
|
|
|
err = usbd_device2interface_handle(dev, AUE_IFACE_IDX, &iface);
|
|
if (err) {
|
|
printf("%s: getting interface handle failed\n",
|
|
USBDEVNAME(sc->aue_dev));
|
|
USB_ATTACH_ERROR_RETURN;
|
|
}
|
|
|
|
sc->aue_flags = aue_lookup(uaa->vendor, uaa->product)->aue_flags;
|
|
|
|
sc->aue_udev = dev;
|
|
sc->aue_iface = iface;
|
|
sc->aue_product = uaa->product;
|
|
sc->aue_vendor = uaa->vendor;
|
|
|
|
id = usbd_get_interface_descriptor(iface);
|
|
|
|
/* Find endpoints. */
|
|
for (i = 0; i < id->bNumEndpoints; i++) {
|
|
ed = usbd_interface2endpoint_descriptor(iface, i);
|
|
if (ed == NULL) {
|
|
printf("%s: couldn't get endpoint descriptor %d\n",
|
|
USBDEVNAME(sc->aue_dev), i);
|
|
USB_ATTACH_ERROR_RETURN;
|
|
}
|
|
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
|
|
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
|
|
sc->aue_ed[AUE_ENDPT_RX] = ed->bEndpointAddress;
|
|
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
|
|
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
|
|
sc->aue_ed[AUE_ENDPT_TX] = ed->bEndpointAddress;
|
|
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
|
|
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
|
|
sc->aue_ed[AUE_ENDPT_INTR] = ed->bEndpointAddress;
|
|
}
|
|
}
|
|
|
|
if (sc->aue_ed[AUE_ENDPT_RX] == 0 || sc->aue_ed[AUE_ENDPT_TX] == 0 ||
|
|
sc->aue_ed[AUE_ENDPT_INTR] == 0) {
|
|
printf("%s: missing endpoint\n", USBDEVNAME(sc->aue_dev));
|
|
USB_ATTACH_ERROR_RETURN;
|
|
}
|
|
|
|
|
|
s = splnet();
|
|
|
|
/* Reset the adapter. */
|
|
aue_reset(sc);
|
|
|
|
/*
|
|
* Get station address from the EEPROM.
|
|
*/
|
|
aue_read_mac(sc, eaddr);
|
|
|
|
/*
|
|
* A Pegasus chip was detected. Inform the world.
|
|
*/
|
|
ifp = GET_IFP(sc);
|
|
printf("%s: Ethernet address %s\n", USBDEVNAME(sc->aue_dev),
|
|
ether_sprintf(eaddr));
|
|
|
|
/* Initialize interface info.*/
|
|
ifp->if_softc = sc;
|
|
ifp->if_mtu = ETHERMTU;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = aue_ioctl;
|
|
ifp->if_start = aue_start;
|
|
ifp->if_watchdog = aue_watchdog;
|
|
#if defined(__OpenBSD__)
|
|
ifp->if_snd.ifq_maxlen = IFQ_MAXLEN;
|
|
#endif
|
|
strncpy(ifp->if_xname, USBDEVNAME(sc->aue_dev), IFNAMSIZ);
|
|
|
|
IFQ_SET_READY(&ifp->if_snd);
|
|
|
|
/* Initialize MII/media info. */
|
|
mii = &sc->aue_mii;
|
|
mii->mii_ifp = ifp;
|
|
mii->mii_readreg = aue_miibus_readreg;
|
|
mii->mii_writereg = aue_miibus_writereg;
|
|
mii->mii_statchg = aue_miibus_statchg;
|
|
mii->mii_flags = MIIF_AUTOTSLEEP;
|
|
ifmedia_init(&mii->mii_media, 0, aue_ifmedia_upd, aue_ifmedia_sts);
|
|
mii_attach(self, mii, 0xffffffff, MII_PHY_ANY, MII_OFFSET_ANY, 0);
|
|
if (LIST_FIRST(&mii->mii_phys) == NULL) {
|
|
ifmedia_add(&mii->mii_media, IFM_ETHER | IFM_NONE, 0, NULL);
|
|
ifmedia_set(&mii->mii_media, IFM_ETHER | IFM_NONE);
|
|
} else
|
|
ifmedia_set(&mii->mii_media, IFM_ETHER | IFM_AUTO);
|
|
|
|
/* Attach the interface. */
|
|
if_attach(ifp);
|
|
Ether_ifattach(ifp, eaddr);
|
|
#if NRND > 0
|
|
rnd_attach_source(&sc->rnd_source, USBDEVNAME(sc->aue_dev),
|
|
RND_TYPE_NET, 0);
|
|
#endif
|
|
|
|
usb_callout_init(sc->aue_stat_ch);
|
|
|
|
sc->aue_attached = 1;
|
|
splx(s);
|
|
|
|
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->aue_udev,
|
|
USBDEV(sc->aue_dev));
|
|
|
|
USB_ATTACH_SUCCESS_RETURN;
|
|
}
|
|
|
|
USB_DETACH(aue)
|
|
{
|
|
USB_DETACH_START(aue, sc);
|
|
struct ifnet *ifp = GET_IFP(sc);
|
|
int s;
|
|
|
|
DPRINTFN(2,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__));
|
|
|
|
if (!sc->aue_attached) {
|
|
/* Detached before attached finished, so just bail out. */
|
|
return (0);
|
|
}
|
|
|
|
usb_uncallout(sc->aue_stat_ch, aue_tick, sc);
|
|
/*
|
|
* Remove any pending tasks. They cannot be executing because they run
|
|
* in the same thread as detach.
|
|
*/
|
|
usb_rem_task(sc->aue_udev, &sc->aue_tick_task);
|
|
usb_rem_task(sc->aue_udev, &sc->aue_stop_task);
|
|
|
|
s = splusb();
|
|
|
|
if (ifp->if_flags & IFF_RUNNING)
|
|
aue_stop(sc);
|
|
|
|
#if defined(__NetBSD__)
|
|
#if NRND > 0
|
|
rnd_detach_source(&sc->rnd_source);
|
|
#endif
|
|
mii_detach(&sc->aue_mii, MII_PHY_ANY, MII_OFFSET_ANY);
|
|
ifmedia_delete_instance(&sc->aue_mii.mii_media, IFM_INST_ANY);
|
|
ether_ifdetach(ifp);
|
|
#endif /* __NetBSD__ */
|
|
|
|
if_detach(ifp);
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (sc->aue_ep[AUE_ENDPT_TX] != NULL ||
|
|
sc->aue_ep[AUE_ENDPT_RX] != NULL ||
|
|
sc->aue_ep[AUE_ENDPT_INTR] != NULL)
|
|
printf("%s: detach has active endpoints\n",
|
|
USBDEVNAME(sc->aue_dev));
|
|
#endif
|
|
|
|
sc->aue_attached = 0;
|
|
|
|
if (--sc->aue_refcnt >= 0) {
|
|
/* Wait for processes to go away. */
|
|
usb_detach_wait(USBDEV(sc->aue_dev));
|
|
}
|
|
splx(s);
|
|
|
|
usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->aue_udev,
|
|
USBDEV(sc->aue_dev));
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
aue_activate(device_ptr_t self, enum devact act)
|
|
{
|
|
struct aue_softc *sc = (struct aue_softc *)self;
|
|
|
|
DPRINTFN(2,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__));
|
|
|
|
switch (act) {
|
|
case DVACT_ACTIVATE:
|
|
return (EOPNOTSUPP);
|
|
break;
|
|
|
|
case DVACT_DEACTIVATE:
|
|
if_deactivate(&sc->aue_ec.ec_if);
|
|
sc->aue_dying = 1;
|
|
break;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Initialize an RX descriptor and attach an MBUF cluster.
|
|
*/
|
|
Static int
|
|
aue_newbuf(struct aue_softc *sc, struct aue_chain *c, struct mbuf *m)
|
|
{
|
|
struct mbuf *m_new = NULL;
|
|
|
|
DPRINTFN(10,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev),__FUNCTION__));
|
|
|
|
if (m == NULL) {
|
|
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
|
|
if (m_new == NULL) {
|
|
printf("%s: no memory for rx list "
|
|
"-- packet dropped!\n", USBDEVNAME(sc->aue_dev));
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
MCLGET(m_new, M_DONTWAIT);
|
|
if (!(m_new->m_flags & M_EXT)) {
|
|
printf("%s: no memory for rx list "
|
|
"-- packet dropped!\n", USBDEVNAME(sc->aue_dev));
|
|
m_freem(m_new);
|
|
return (ENOBUFS);
|
|
}
|
|
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
|
|
} else {
|
|
m_new = m;
|
|
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
|
|
m_new->m_data = m_new->m_ext.ext_buf;
|
|
}
|
|
|
|
m_adj(m_new, ETHER_ALIGN);
|
|
c->aue_mbuf = m_new;
|
|
|
|
return (0);
|
|
}
|
|
|
|
Static int
|
|
aue_rx_list_init(struct aue_softc *sc)
|
|
{
|
|
struct aue_cdata *cd;
|
|
struct aue_chain *c;
|
|
int i;
|
|
|
|
DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__));
|
|
|
|
cd = &sc->aue_cdata;
|
|
for (i = 0; i < AUE_RX_LIST_CNT; i++) {
|
|
c = &cd->aue_rx_chain[i];
|
|
c->aue_sc = sc;
|
|
c->aue_idx = i;
|
|
if (aue_newbuf(sc, c, NULL) == ENOBUFS)
|
|
return (ENOBUFS);
|
|
if (c->aue_xfer == NULL) {
|
|
c->aue_xfer = usbd_alloc_xfer(sc->aue_udev);
|
|
if (c->aue_xfer == NULL)
|
|
return (ENOBUFS);
|
|
c->aue_buf = usbd_alloc_buffer(c->aue_xfer, AUE_BUFSZ);
|
|
if (c->aue_buf == NULL)
|
|
return (ENOBUFS); /* XXX free xfer */
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
Static int
|
|
aue_tx_list_init(struct aue_softc *sc)
|
|
{
|
|
struct aue_cdata *cd;
|
|
struct aue_chain *c;
|
|
int i;
|
|
|
|
DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__));
|
|
|
|
cd = &sc->aue_cdata;
|
|
for (i = 0; i < AUE_TX_LIST_CNT; i++) {
|
|
c = &cd->aue_tx_chain[i];
|
|
c->aue_sc = sc;
|
|
c->aue_idx = i;
|
|
c->aue_mbuf = NULL;
|
|
if (c->aue_xfer == NULL) {
|
|
c->aue_xfer = usbd_alloc_xfer(sc->aue_udev);
|
|
if (c->aue_xfer == NULL)
|
|
return (ENOBUFS);
|
|
c->aue_buf = usbd_alloc_buffer(c->aue_xfer, AUE_BUFSZ);
|
|
if (c->aue_buf == NULL)
|
|
return (ENOBUFS);
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
Static void
|
|
aue_intr(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
|
|
{
|
|
struct aue_softc *sc = priv;
|
|
struct ifnet *ifp = GET_IFP(sc);
|
|
struct aue_intrpkt *p = &sc->aue_cdata.aue_ibuf;
|
|
|
|
DPRINTFN(15,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev),__FUNCTION__));
|
|
|
|
if (sc->aue_dying)
|
|
return;
|
|
|
|
if (!(ifp->if_flags & IFF_RUNNING))
|
|
return;
|
|
|
|
if (status != USBD_NORMAL_COMPLETION) {
|
|
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) {
|
|
return;
|
|
}
|
|
sc->aue_intr_errs++;
|
|
if (usbd_ratecheck(&sc->aue_rx_notice)) {
|
|
printf("%s: %u usb errors on intr: %s\n",
|
|
USBDEVNAME(sc->aue_dev), sc->aue_intr_errs,
|
|
usbd_errstr(status));
|
|
sc->aue_intr_errs = 0;
|
|
}
|
|
if (status == USBD_STALLED)
|
|
usbd_clear_endpoint_stall(sc->aue_ep[AUE_ENDPT_RX]);
|
|
return;
|
|
}
|
|
|
|
if (p->aue_txstat0)
|
|
ifp->if_oerrors++;
|
|
|
|
if (p->aue_txstat0 & (AUE_TXSTAT0_LATECOLL | AUE_TXSTAT0_EXCESSCOLL))
|
|
ifp->if_collisions++;
|
|
}
|
|
|
|
/*
|
|
* A frame has been uploaded: pass the resulting mbuf chain up to
|
|
* the higher level protocols.
|
|
*/
|
|
Static void
|
|
aue_rxeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
|
|
{
|
|
struct aue_chain *c = priv;
|
|
struct aue_softc *sc = c->aue_sc;
|
|
struct ifnet *ifp = GET_IFP(sc);
|
|
struct mbuf *m;
|
|
u_int32_t total_len;
|
|
struct aue_rxpkt r;
|
|
int s;
|
|
|
|
DPRINTFN(10,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev),__FUNCTION__));
|
|
|
|
if (sc->aue_dying)
|
|
return;
|
|
|
|
if (!(ifp->if_flags & IFF_RUNNING))
|
|
return;
|
|
|
|
if (status != USBD_NORMAL_COMPLETION) {
|
|
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
|
|
return;
|
|
sc->aue_rx_errs++;
|
|
if (usbd_ratecheck(&sc->aue_rx_notice)) {
|
|
printf("%s: %u usb errors on rx: %s\n",
|
|
USBDEVNAME(sc->aue_dev), sc->aue_rx_errs,
|
|
usbd_errstr(status));
|
|
sc->aue_rx_errs = 0;
|
|
}
|
|
if (status == USBD_STALLED)
|
|
usbd_clear_endpoint_stall(sc->aue_ep[AUE_ENDPT_RX]);
|
|
goto done;
|
|
}
|
|
|
|
usbd_get_xfer_status(xfer, NULL, NULL, &total_len, NULL);
|
|
|
|
memcpy(mtod(c->aue_mbuf, char *), c->aue_buf, total_len);
|
|
|
|
if (total_len <= 4 + ETHER_CRC_LEN) {
|
|
ifp->if_ierrors++;
|
|
goto done;
|
|
}
|
|
|
|
memcpy(&r, c->aue_buf + total_len - 4, sizeof(r));
|
|
|
|
/* Turn off all the non-error bits in the rx status word. */
|
|
r.aue_rxstat &= AUE_RXSTAT_MASK;
|
|
if (r.aue_rxstat) {
|
|
ifp->if_ierrors++;
|
|
goto done;
|
|
}
|
|
|
|
/* No errors; receive the packet. */
|
|
m = c->aue_mbuf;
|
|
total_len -= ETHER_CRC_LEN + 4;
|
|
m->m_pkthdr.len = m->m_len = total_len;
|
|
ifp->if_ipackets++;
|
|
|
|
m->m_pkthdr.rcvif = ifp;
|
|
|
|
s = splnet();
|
|
|
|
/* XXX ugly */
|
|
if (aue_newbuf(sc, c, NULL) == ENOBUFS) {
|
|
ifp->if_ierrors++;
|
|
goto done1;
|
|
}
|
|
|
|
#if NBPFILTER > 0
|
|
/*
|
|
* Handle BPF listeners. Let the BPF user see the packet, but
|
|
* don't pass it up to the ether_input() layer unless it's
|
|
* a broadcast packet, multicast packet, matches our ethernet
|
|
* address or the interface is in promiscuous mode.
|
|
*/
|
|
if (ifp->if_bpf)
|
|
BPF_MTAP(ifp, m);
|
|
#endif
|
|
|
|
DPRINTFN(10,("%s: %s: deliver %d\n", USBDEVNAME(sc->aue_dev),
|
|
__FUNCTION__, m->m_len));
|
|
IF_INPUT(ifp, m);
|
|
done1:
|
|
splx(s);
|
|
|
|
done:
|
|
|
|
/* Setup new transfer. */
|
|
usbd_setup_xfer(xfer, sc->aue_ep[AUE_ENDPT_RX],
|
|
c, c->aue_buf, AUE_BUFSZ,
|
|
USBD_SHORT_XFER_OK | USBD_NO_COPY,
|
|
USBD_NO_TIMEOUT, aue_rxeof);
|
|
usbd_transfer(xfer);
|
|
|
|
DPRINTFN(10,("%s: %s: start rx\n", USBDEVNAME(sc->aue_dev),
|
|
__FUNCTION__));
|
|
}
|
|
|
|
/*
|
|
* A frame was downloaded to the chip. It's safe for us to clean up
|
|
* the list buffers.
|
|
*/
|
|
|
|
Static void
|
|
aue_txeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
|
|
{
|
|
struct aue_chain *c = priv;
|
|
struct aue_softc *sc = c->aue_sc;
|
|
struct ifnet *ifp = GET_IFP(sc);
|
|
int s;
|
|
|
|
if (sc->aue_dying)
|
|
return;
|
|
|
|
s = splnet();
|
|
|
|
DPRINTFN(10,("%s: %s: enter status=%d\n", USBDEVNAME(sc->aue_dev),
|
|
__FUNCTION__, status));
|
|
|
|
ifp->if_timer = 0;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
|
|
if (status != USBD_NORMAL_COMPLETION) {
|
|
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) {
|
|
splx(s);
|
|
return;
|
|
}
|
|
ifp->if_oerrors++;
|
|
printf("%s: usb error on tx: %s\n", USBDEVNAME(sc->aue_dev),
|
|
usbd_errstr(status));
|
|
if (status == USBD_STALLED)
|
|
usbd_clear_endpoint_stall(sc->aue_ep[AUE_ENDPT_TX]);
|
|
splx(s);
|
|
return;
|
|
}
|
|
|
|
ifp->if_opackets++;
|
|
|
|
m_freem(c->aue_mbuf);
|
|
c->aue_mbuf = NULL;
|
|
|
|
if (IFQ_IS_EMPTY(&ifp->if_snd) == 0)
|
|
aue_start(ifp);
|
|
|
|
splx(s);
|
|
}
|
|
|
|
Static void
|
|
aue_tick(void *xsc)
|
|
{
|
|
struct aue_softc *sc = xsc;
|
|
|
|
DPRINTFN(15,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev),__FUNCTION__));
|
|
|
|
if (sc == NULL)
|
|
return;
|
|
|
|
if (sc->aue_dying)
|
|
return;
|
|
|
|
/* Perform periodic stuff in process context. */
|
|
usb_add_task(sc->aue_udev, &sc->aue_tick_task);
|
|
}
|
|
|
|
Static void
|
|
aue_tick_task(void *xsc)
|
|
{
|
|
struct aue_softc *sc = xsc;
|
|
struct ifnet *ifp;
|
|
struct mii_data *mii;
|
|
int s;
|
|
|
|
DPRINTFN(15,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev),__FUNCTION__));
|
|
|
|
if (sc->aue_dying)
|
|
return;
|
|
|
|
ifp = GET_IFP(sc);
|
|
mii = GET_MII(sc);
|
|
if (mii == NULL)
|
|
return;
|
|
|
|
s = splnet();
|
|
|
|
mii_tick(mii);
|
|
if (!sc->aue_link) {
|
|
mii_pollstat(mii); /* XXX FreeBSD has removed this call */
|
|
if (mii->mii_media_status & IFM_ACTIVE &&
|
|
IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
|
|
DPRINTFN(2,("%s: %s: got link\n",
|
|
USBDEVNAME(sc->aue_dev),__FUNCTION__));
|
|
sc->aue_link++;
|
|
if (IFQ_IS_EMPTY(&ifp->if_snd) == 0)
|
|
aue_start(ifp);
|
|
}
|
|
}
|
|
|
|
usb_callout(sc->aue_stat_ch, hz, aue_tick, sc);
|
|
|
|
splx(s);
|
|
}
|
|
|
|
Static int
|
|
aue_send(struct aue_softc *sc, struct mbuf *m, int idx)
|
|
{
|
|
int total_len;
|
|
struct aue_chain *c;
|
|
usbd_status err;
|
|
|
|
DPRINTFN(10,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev),__FUNCTION__));
|
|
|
|
c = &sc->aue_cdata.aue_tx_chain[idx];
|
|
|
|
/*
|
|
* Copy the mbuf data into a contiguous buffer, leaving two
|
|
* bytes at the beginning to hold the frame length.
|
|
*/
|
|
m_copydata(m, 0, m->m_pkthdr.len, c->aue_buf + 2);
|
|
c->aue_mbuf = m;
|
|
|
|
/*
|
|
* The ADMtek documentation says that the packet length is
|
|
* supposed to be specified in the first two bytes of the
|
|
* transfer, however it actually seems to ignore this info
|
|
* and base the frame size on the bulk transfer length.
|
|
*/
|
|
c->aue_buf[0] = (u_int8_t)m->m_pkthdr.len;
|
|
c->aue_buf[1] = (u_int8_t)(m->m_pkthdr.len >> 8);
|
|
total_len = m->m_pkthdr.len + 2;
|
|
|
|
usbd_setup_xfer(c->aue_xfer, sc->aue_ep[AUE_ENDPT_TX],
|
|
c, c->aue_buf, total_len, USBD_FORCE_SHORT_XFER | USBD_NO_COPY,
|
|
AUE_TX_TIMEOUT, aue_txeof);
|
|
|
|
/* Transmit */
|
|
err = usbd_transfer(c->aue_xfer);
|
|
if (err != USBD_IN_PROGRESS) {
|
|
printf("%s: aue_send error=%s\n", USBDEVNAME(sc->aue_dev),
|
|
usbd_errstr(err));
|
|
/* Stop the interface from process context. */
|
|
usb_add_task(sc->aue_udev, &sc->aue_stop_task);
|
|
return (EIO);
|
|
}
|
|
DPRINTFN(5,("%s: %s: send %d bytes\n", USBDEVNAME(sc->aue_dev),
|
|
__FUNCTION__, total_len));
|
|
|
|
sc->aue_cdata.aue_tx_cnt++;
|
|
|
|
return (0);
|
|
}
|
|
|
|
Static void
|
|
aue_start(struct ifnet *ifp)
|
|
{
|
|
struct aue_softc *sc = ifp->if_softc;
|
|
struct mbuf *m_head = NULL;
|
|
|
|
DPRINTFN(5,("%s: %s: enter, link=%d\n", USBDEVNAME(sc->aue_dev),
|
|
__FUNCTION__, sc->aue_link));
|
|
|
|
if (sc->aue_dying)
|
|
return;
|
|
|
|
if (!sc->aue_link)
|
|
return;
|
|
|
|
if (ifp->if_flags & IFF_OACTIVE)
|
|
return;
|
|
|
|
IFQ_POLL(&ifp->if_snd, m_head);
|
|
if (m_head == NULL)
|
|
return;
|
|
|
|
if (aue_send(sc, m_head, 0)) {
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
return;
|
|
}
|
|
|
|
IFQ_DEQUEUE(&ifp->if_snd, m_head);
|
|
|
|
#if NBPFILTER > 0
|
|
/*
|
|
* If there's a BPF listener, bounce a copy of this frame
|
|
* to him.
|
|
*/
|
|
if (ifp->if_bpf)
|
|
BPF_MTAP(ifp, m_head);
|
|
#endif
|
|
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
|
|
/*
|
|
* Set a timeout in case the chip goes out to lunch.
|
|
*/
|
|
ifp->if_timer = 5;
|
|
}
|
|
|
|
Static void
|
|
aue_init(void *xsc)
|
|
{
|
|
struct aue_softc *sc = xsc;
|
|
struct ifnet *ifp = GET_IFP(sc);
|
|
struct mii_data *mii = GET_MII(sc);
|
|
int i, s;
|
|
u_char *eaddr;
|
|
|
|
DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__));
|
|
|
|
if (sc->aue_dying)
|
|
return;
|
|
|
|
if (ifp->if_flags & IFF_RUNNING)
|
|
return;
|
|
|
|
s = splnet();
|
|
|
|
/*
|
|
* Cancel pending I/O and free all RX/TX buffers.
|
|
*/
|
|
aue_reset(sc);
|
|
|
|
#if defined(__OpenBSD__)
|
|
eaddr = sc->arpcom.ac_enaddr;
|
|
#elif defined(__NetBSD__)
|
|
eaddr = LLADDR(ifp->if_sadl);
|
|
#endif /* defined(__NetBSD__) */
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++)
|
|
aue_csr_write_1(sc, AUE_PAR0 + i, eaddr[i]);
|
|
|
|
/* If we want promiscuous mode, set the allframes bit. */
|
|
if (ifp->if_flags & IFF_PROMISC)
|
|
AUE_SETBIT(sc, AUE_CTL2, AUE_CTL2_RX_PROMISC);
|
|
else
|
|
AUE_CLRBIT(sc, AUE_CTL2, AUE_CTL2_RX_PROMISC);
|
|
|
|
/* Init TX ring. */
|
|
if (aue_tx_list_init(sc) == ENOBUFS) {
|
|
printf("%s: tx list init failed\n", USBDEVNAME(sc->aue_dev));
|
|
splx(s);
|
|
return;
|
|
}
|
|
|
|
/* Init RX ring. */
|
|
if (aue_rx_list_init(sc) == ENOBUFS) {
|
|
printf("%s: rx list init failed\n", USBDEVNAME(sc->aue_dev));
|
|
splx(s);
|
|
return;
|
|
}
|
|
|
|
/* Load the multicast filter. */
|
|
aue_setmulti(sc);
|
|
|
|
/* Enable RX and TX */
|
|
aue_csr_write_1(sc, AUE_CTL0, AUE_CTL0_RXSTAT_APPEND | AUE_CTL0_RX_ENB);
|
|
AUE_SETBIT(sc, AUE_CTL0, AUE_CTL0_TX_ENB);
|
|
AUE_SETBIT(sc, AUE_CTL2, AUE_CTL2_EP3_CLR);
|
|
|
|
mii_mediachg(mii);
|
|
|
|
if (sc->aue_ep[AUE_ENDPT_RX] == NULL) {
|
|
if (aue_openpipes(sc)) {
|
|
splx(s);
|
|
return;
|
|
}
|
|
}
|
|
|
|
ifp->if_flags |= IFF_RUNNING;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
|
|
splx(s);
|
|
|
|
usb_callout(sc->aue_stat_ch, hz, aue_tick, sc);
|
|
}
|
|
|
|
Static int
|
|
aue_openpipes(struct aue_softc *sc)
|
|
{
|
|
struct aue_chain *c;
|
|
usbd_status err;
|
|
int i;
|
|
|
|
/* Open RX and TX pipes. */
|
|
err = usbd_open_pipe(sc->aue_iface, sc->aue_ed[AUE_ENDPT_RX],
|
|
USBD_EXCLUSIVE_USE, &sc->aue_ep[AUE_ENDPT_RX]);
|
|
if (err) {
|
|
printf("%s: open rx pipe failed: %s\n",
|
|
USBDEVNAME(sc->aue_dev), usbd_errstr(err));
|
|
return (EIO);
|
|
}
|
|
err = usbd_open_pipe(sc->aue_iface, sc->aue_ed[AUE_ENDPT_TX],
|
|
USBD_EXCLUSIVE_USE, &sc->aue_ep[AUE_ENDPT_TX]);
|
|
if (err) {
|
|
printf("%s: open tx pipe failed: %s\n",
|
|
USBDEVNAME(sc->aue_dev), usbd_errstr(err));
|
|
return (EIO);
|
|
}
|
|
err = usbd_open_pipe_intr(sc->aue_iface, sc->aue_ed[AUE_ENDPT_INTR],
|
|
USBD_EXCLUSIVE_USE, &sc->aue_ep[AUE_ENDPT_INTR], sc,
|
|
&sc->aue_cdata.aue_ibuf, AUE_INTR_PKTLEN, aue_intr,
|
|
AUE_INTR_INTERVAL);
|
|
if (err) {
|
|
printf("%s: open intr pipe failed: %s\n",
|
|
USBDEVNAME(sc->aue_dev), usbd_errstr(err));
|
|
return (EIO);
|
|
}
|
|
|
|
/* Start up the receive pipe. */
|
|
for (i = 0; i < AUE_RX_LIST_CNT; i++) {
|
|
c = &sc->aue_cdata.aue_rx_chain[i];
|
|
usbd_setup_xfer(c->aue_xfer, sc->aue_ep[AUE_ENDPT_RX],
|
|
c, c->aue_buf, AUE_BUFSZ,
|
|
USBD_SHORT_XFER_OK | USBD_NO_COPY, USBD_NO_TIMEOUT,
|
|
aue_rxeof);
|
|
(void)usbd_transfer(c->aue_xfer); /* XXX */
|
|
DPRINTFN(5,("%s: %s: start read\n", USBDEVNAME(sc->aue_dev),
|
|
__FUNCTION__));
|
|
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Set media options.
|
|
*/
|
|
Static int
|
|
aue_ifmedia_upd(struct ifnet *ifp)
|
|
{
|
|
struct aue_softc *sc = ifp->if_softc;
|
|
struct mii_data *mii = GET_MII(sc);
|
|
|
|
DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__));
|
|
|
|
if (sc->aue_dying)
|
|
return (0);
|
|
|
|
sc->aue_link = 0;
|
|
if (mii->mii_instance) {
|
|
struct mii_softc *miisc;
|
|
for (miisc = LIST_FIRST(&mii->mii_phys); miisc != NULL;
|
|
miisc = LIST_NEXT(miisc, mii_list))
|
|
mii_phy_reset(miisc);
|
|
}
|
|
mii_mediachg(mii);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Report current media status.
|
|
*/
|
|
Static void
|
|
aue_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
|
|
{
|
|
struct aue_softc *sc = ifp->if_softc;
|
|
struct mii_data *mii = GET_MII(sc);
|
|
|
|
DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__));
|
|
|
|
mii_pollstat(mii);
|
|
ifmr->ifm_active = mii->mii_media_active;
|
|
ifmr->ifm_status = mii->mii_media_status;
|
|
}
|
|
|
|
Static int
|
|
aue_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
|
|
{
|
|
struct aue_softc *sc = ifp->if_softc;
|
|
struct ifaddr *ifa = (struct ifaddr *)data;
|
|
struct ifreq *ifr = (struct ifreq *)data;
|
|
struct mii_data *mii;
|
|
int s, error = 0;
|
|
|
|
if (sc->aue_dying)
|
|
return (EIO);
|
|
|
|
s = splnet();
|
|
|
|
switch(command) {
|
|
case SIOCSIFADDR:
|
|
ifp->if_flags |= IFF_UP;
|
|
aue_init(sc);
|
|
|
|
switch (ifa->ifa_addr->sa_family) {
|
|
#ifdef INET
|
|
case AF_INET:
|
|
#if defined(__NetBSD__)
|
|
arp_ifinit(ifp, ifa);
|
|
#else
|
|
arp_ifinit(&sc->arpcom, ifa);
|
|
#endif
|
|
break;
|
|
#endif /* INET */
|
|
#ifdef NS
|
|
case AF_NS:
|
|
{
|
|
struct ns_addr *ina = &IA_SNS(ifa)->sns_addr;
|
|
|
|
if (ns_nullhost(*ina))
|
|
ina->x_host = *(union ns_host *)
|
|
LLADDR(ifp->if_sadl);
|
|
else
|
|
memcpy(LLADDR(ifp->if_sadl),
|
|
ina->x_host.c_host,
|
|
ifp->if_addrlen);
|
|
break;
|
|
}
|
|
#endif /* NS */
|
|
}
|
|
break;
|
|
|
|
case SIOCSIFMTU:
|
|
if (ifr->ifr_mtu > ETHERMTU)
|
|
error = EINVAL;
|
|
else
|
|
ifp->if_mtu = ifr->ifr_mtu;
|
|
break;
|
|
|
|
case SIOCSIFFLAGS:
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if (ifp->if_flags & IFF_RUNNING &&
|
|
ifp->if_flags & IFF_PROMISC &&
|
|
!(sc->aue_if_flags & IFF_PROMISC)) {
|
|
AUE_SETBIT(sc, AUE_CTL2, AUE_CTL2_RX_PROMISC);
|
|
} else if (ifp->if_flags & IFF_RUNNING &&
|
|
!(ifp->if_flags & IFF_PROMISC) &&
|
|
sc->aue_if_flags & IFF_PROMISC) {
|
|
AUE_CLRBIT(sc, AUE_CTL2, AUE_CTL2_RX_PROMISC);
|
|
} else if (!(ifp->if_flags & IFF_RUNNING))
|
|
aue_init(sc);
|
|
} else {
|
|
if (ifp->if_flags & IFF_RUNNING)
|
|
aue_stop(sc);
|
|
}
|
|
sc->aue_if_flags = ifp->if_flags;
|
|
error = 0;
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
error = (command == SIOCADDMULTI) ?
|
|
ether_addmulti(ifr, &sc->aue_ec) :
|
|
ether_delmulti(ifr, &sc->aue_ec);
|
|
if (error == ENETRESET) {
|
|
aue_init(sc);
|
|
}
|
|
aue_setmulti(sc);
|
|
error = 0;
|
|
break;
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
mii = GET_MII(sc);
|
|
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
|
|
break;
|
|
default:
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
|
|
splx(s);
|
|
|
|
return (error);
|
|
}
|
|
|
|
Static void
|
|
aue_watchdog(struct ifnet *ifp)
|
|
{
|
|
struct aue_softc *sc = ifp->if_softc;
|
|
struct aue_chain *c;
|
|
usbd_status stat;
|
|
int s;
|
|
|
|
DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__));
|
|
|
|
ifp->if_oerrors++;
|
|
printf("%s: watchdog timeout\n", USBDEVNAME(sc->aue_dev));
|
|
|
|
s = splusb();
|
|
c = &sc->aue_cdata.aue_tx_chain[0];
|
|
usbd_get_xfer_status(c->aue_xfer, NULL, NULL, NULL, &stat);
|
|
aue_txeof(c->aue_xfer, c, stat);
|
|
|
|
if (IFQ_IS_EMPTY(&ifp->if_snd) == 0)
|
|
aue_start(ifp);
|
|
splx(s);
|
|
}
|
|
|
|
/*
|
|
* Stop the adapter and free any mbufs allocated to the
|
|
* RX and TX lists.
|
|
*/
|
|
Static void
|
|
aue_stop(struct aue_softc *sc)
|
|
{
|
|
usbd_status err;
|
|
struct ifnet *ifp;
|
|
int i;
|
|
|
|
DPRINTFN(5,("%s: %s: enter\n", USBDEVNAME(sc->aue_dev), __FUNCTION__));
|
|
|
|
ifp = GET_IFP(sc);
|
|
ifp->if_timer = 0;
|
|
|
|
aue_csr_write_1(sc, AUE_CTL0, 0);
|
|
aue_csr_write_1(sc, AUE_CTL1, 0);
|
|
aue_reset(sc);
|
|
usb_uncallout(sc->aue_stat_ch, aue_tick, sc);
|
|
|
|
/* Stop transfers. */
|
|
if (sc->aue_ep[AUE_ENDPT_RX] != NULL) {
|
|
err = usbd_abort_pipe(sc->aue_ep[AUE_ENDPT_RX]);
|
|
if (err) {
|
|
printf("%s: abort rx pipe failed: %s\n",
|
|
USBDEVNAME(sc->aue_dev), usbd_errstr(err));
|
|
}
|
|
err = usbd_close_pipe(sc->aue_ep[AUE_ENDPT_RX]);
|
|
if (err) {
|
|
printf("%s: close rx pipe failed: %s\n",
|
|
USBDEVNAME(sc->aue_dev), usbd_errstr(err));
|
|
}
|
|
sc->aue_ep[AUE_ENDPT_RX] = NULL;
|
|
}
|
|
|
|
if (sc->aue_ep[AUE_ENDPT_TX] != NULL) {
|
|
err = usbd_abort_pipe(sc->aue_ep[AUE_ENDPT_TX]);
|
|
if (err) {
|
|
printf("%s: abort tx pipe failed: %s\n",
|
|
USBDEVNAME(sc->aue_dev), usbd_errstr(err));
|
|
}
|
|
err = usbd_close_pipe(sc->aue_ep[AUE_ENDPT_TX]);
|
|
if (err) {
|
|
printf("%s: close tx pipe failed: %s\n",
|
|
USBDEVNAME(sc->aue_dev), usbd_errstr(err));
|
|
}
|
|
sc->aue_ep[AUE_ENDPT_TX] = NULL;
|
|
}
|
|
|
|
if (sc->aue_ep[AUE_ENDPT_INTR] != NULL) {
|
|
err = usbd_abort_pipe(sc->aue_ep[AUE_ENDPT_INTR]);
|
|
if (err) {
|
|
printf("%s: abort intr pipe failed: %s\n",
|
|
USBDEVNAME(sc->aue_dev), usbd_errstr(err));
|
|
}
|
|
err = usbd_close_pipe(sc->aue_ep[AUE_ENDPT_INTR]);
|
|
if (err) {
|
|
printf("%s: close intr pipe failed: %s\n",
|
|
USBDEVNAME(sc->aue_dev), usbd_errstr(err));
|
|
}
|
|
sc->aue_ep[AUE_ENDPT_INTR] = NULL;
|
|
}
|
|
|
|
/* Free RX resources. */
|
|
for (i = 0; i < AUE_RX_LIST_CNT; i++) {
|
|
if (sc->aue_cdata.aue_rx_chain[i].aue_mbuf != NULL) {
|
|
m_freem(sc->aue_cdata.aue_rx_chain[i].aue_mbuf);
|
|
sc->aue_cdata.aue_rx_chain[i].aue_mbuf = NULL;
|
|
}
|
|
if (sc->aue_cdata.aue_rx_chain[i].aue_xfer != NULL) {
|
|
usbd_free_xfer(sc->aue_cdata.aue_rx_chain[i].aue_xfer);
|
|
sc->aue_cdata.aue_rx_chain[i].aue_xfer = NULL;
|
|
}
|
|
}
|
|
|
|
/* Free TX resources. */
|
|
for (i = 0; i < AUE_TX_LIST_CNT; i++) {
|
|
if (sc->aue_cdata.aue_tx_chain[i].aue_mbuf != NULL) {
|
|
m_freem(sc->aue_cdata.aue_tx_chain[i].aue_mbuf);
|
|
sc->aue_cdata.aue_tx_chain[i].aue_mbuf = NULL;
|
|
}
|
|
if (sc->aue_cdata.aue_tx_chain[i].aue_xfer != NULL) {
|
|
usbd_free_xfer(sc->aue_cdata.aue_tx_chain[i].aue_xfer);
|
|
sc->aue_cdata.aue_tx_chain[i].aue_xfer = NULL;
|
|
}
|
|
}
|
|
|
|
sc->aue_link = 0;
|
|
|
|
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
|
|
}
|