NetBSD/dist/ntp/ntpd/map_vme.c

138 lines
3.3 KiB
C

/* $NetBSD: map_vme.c,v 1.1.1.1 2000/03/29 12:38:52 simonb Exp $ */
/********************************************************/
/* map_vme.c */
/* VME control of TrueTime VME-SG sync gen card */
/* and TrueTime GPS-VME receiver card */
/* Version for 700 series HPUX 9.0 */
/* Richard E.Schmidt, US Naval Observatory, Washington */
/* 27 March 94 */
/********************************************************/
#ifdef HAVE_CONFIG_H
# include <config.h>
#endif
#if defined(REFCLOCK) && defined(CLOCK_GPSVME)
#include <stdio.h>
#include <errno.h>
#include <time.h>
#include <sys/types.h>
#include <fcntl.h>
#include <sys/file.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/sysmacros.h>
#include <sys/rtprio.h> /* for rtprio */
#include <sys/lock.h> /* for plock */
#include "/etc/conf/machine/vme2.h"
#include "/etc/conf/h/io.h"
#include "gps.h"
/* GLOBALS */
void *gps_base;
unsigned short *greg[NREGS];
struct vme2_map_addr ma; /* memory mapped structure */
int fd; /* file descriptor for VME */
void unmap_vme ();
caddr_t
map_vme (
char *filename
)
{
int ret;
caddr_t base;
struct vme2_io_testx tx;
caddr_t cp;
#define VME_START_ADDR 0x00000 /* Starting address in A16N VME Space */
#define VMESIZE 0xFF /* 256 bytes of A16N space length */
/*
To create the HP9000/700 series device file, /dev/vme2:
mknod /dev/vme2 c 44 0x0; chmod 600 /dev/vme2
Then must create /etc/vme.CFG and run /etc/vme_config and reboot.
*/
if ((fd = open (filename, O_RDWR)) < 0) {
printf("ERROR: VME bus adapter open failed. errno:%d\n",
errno);
if(errno == ENODEV) {
printf("ENODEV. Is driver in kernel? vme2 in dfile?\n");
}
exit(errno);
}
tx.card_type = VME_A16;
tx.vme_addr = VME_START_ADDR;
tx.width = SHORT_WIDE;
if(ioctl(fd, VME2_IO_TESTR, &tx)) {
printf("ioctl to test VME space failed. Errno: %d\n",
errno);
exit(errno);
}
if(tx.error)
printf("io_testr failed internal error %d\n",tx.error);
if(tx.access_result < 0) {
printf("io_testr failed\n");
exit(2);
}
/* If successful mmap the device */
/* NOW MAP THE CARD */
ma.card_type = VME_A16;
ma.vme_addr = VME_START_ADDR;
ma.size = VMESIZE;
if(ioctl(fd, VME2_MAP_ADDR, &ma)) {
printf("ioctl to map VME space failed. Errno: %d\n",
errno);
exit(errno);
}
if(ma.error) {
printf("ioctl to map VME failed\n");
exit(ENOMEM);
}
base = ma.user_addr;
return(base);
}
void
unmap_vme(void)
{
if(ioctl(fd, VME2_UNMAP_ADDR, &ma))
printf("ioctl to unmap VME space failed. Errno: %d\n",
errno);
close(fd);
return;
}
int
init_vme(boid)
{
/* set up address offsets */
gps_base = map_vme (GPS_VME);
/* offsets from base address: */
greg[0] = (unsigned short *)gps_base + GFRZ1;
greg[1] = (unsigned short *)gps_base + GUFRZ1;
greg[2] = (unsigned short *)gps_base + GREG1A;
greg[3] = (unsigned short *)gps_base + GREG1B;
greg[4] = (unsigned short *)gps_base + GREG1C;
greg[5] = (unsigned short *)gps_base + GREG1D;
greg[6] = (unsigned short *)gps_base + GREG1E;
return (0);
}
#else /* not (REFCLOCK && CLOCK_GPSVME) */
int map_vme_bs;
#endif /* not (REFCLOCK && CLOCK_GPSVME) */