itojun 0f8f9a1f56 deal with PCMCIA_TPCE_IO_RANGE_ADDRSIZE_NONE and ... PCMCIA_TPCE_IO_RANGE_LENGTHSIZE_NONE properly. enami solves kern/26726.		2004-09-17 18:42:41 +00:00
..
aic_pcmcia.c
com_pcmcia.c	Always use PCMCIA_WIDTH_AUTO rather than PCMCIA_WIDTH_IO16. This spec is	2004-08-11 04:25:28 +00:00
devlist2h.awk
esl_pcmcia.c
esl.c
eslvar.h
esp_pcmcia.c
fdc_pcmcia.c
files.pcmcia
if_an_pcmcia.c
if_awi_pcmcia.c
if_cnw.c
if_cnwioctl.h
if_cnwreg.h
if_cs_pcmcia.c
if_ep_pcmcia.c
if_mbe_pcmcia.c	Do the read of the MAC address before enabling the function the first time,	2004-08-11 03:56:03 +00:00
if_ne_pcmcia.c	Now that we write the IOBASE in generic code, don't do it here. Instead,	2004-08-12 17:33:17 +00:00
if_ray.c
if_rayreg.h
if_sm_pcmcia.c
if_tr_pcmcia.c
if_wi_pcmcia.c
if_xi.c	Remove sc_offset. It's always 0, and if we did want to use it, "that's what	2004-08-12 19:42:03 +00:00
if_xireg.h	Remove sc_offset. It's always 0, and if we did want to use it, "that's what	2004-08-12 19:42:03 +00:00
if_xivar.h	Remove sc_offset. It's always 0, and if we did want to use it, "that's what	2004-08-12 19:42:03 +00:00
isic_pcmcia_avm_fritz.c
isic_pcmcia_elsa_isdnmc.c
isic_pcmcia_elsa_mcall.c
isic_pcmcia_sbspeedstar2.c
isic_pcmcia.c
isic_pcmcia.h
Makefile
Makefile.pcmciadevs
mhzc.c	delay() -> tsleep()	2004-08-12 19:32:36 +00:00
nca_pcmcia.c
opl_esl.c	adapt to esl_pcmcia changes	2004-08-11 16:20:05 +00:00
pcmcia_cis_quirks.c
pcmcia_cis.c	deal with PCMCIA_TPCE_IO_RANGE_ADDRSIZE_NONE and	2004-09-17 18:42:41 +00:00
pcmcia.c	Allow to rescan and detach by user request, using the new autoconf	2004-08-18 12:01:13 +00:00
pcmciachip.h	a round of autoconf cleanup:	2004-09-13 12:55:47 +00:00
pcmciadevs
pcmciadevs_data.h
pcmciadevs.h
pcmciareg.h	My previous understanding of the I/O base/limit registers was incorrect.	2004-08-12 16:04:20 +00:00
pcmciavar.h	Simplify a little. Pass down the card type from pcmcia_function_enable(),	2004-08-12 19:59:07 +00:00
pcmcom.c	a round of autoconf cleanup:	2004-09-13 12:55:47 +00:00
spc_pcmcia.c
wdc_pcmcia.c	No need to disable if we failed before enabling it.	2004-09-07 00:24:18 +00:00
xirc.c