310 lines
9.3 KiB
Plaintext
310 lines
9.3 KiB
Plaintext
# $NetBSD: MARVELL_NAS,v 1.42 2021/08/30 00:12:15 rin Exp $
|
|
#
|
|
# This configuration supports for generically Marvell NAS.
|
|
|
|
include "arch/evbarm/conf/std.marvell"
|
|
|
|
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
|
|
# estimated number of users
|
|
|
|
maxusers 32
|
|
|
|
# CPU options
|
|
options CPU_ARM9E
|
|
#makeoptions CPUFLAGS="-mcpu=xscale" # Orion supports XScale instruction set
|
|
options CPU_SHEEVA
|
|
#makeoptions CPUFLAGS="-march=armv5te"
|
|
|
|
# Marvell SoC options
|
|
options ORION
|
|
options KIRKWOOD
|
|
#options MV78XX0 # Discovery Innovation
|
|
|
|
# Standard system options
|
|
|
|
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
|
|
#options NTP # NTP phase/frequency locked loop
|
|
|
|
# File systems
|
|
|
|
file-system FFS # UFS
|
|
file-system EXT2FS # second extended file system (linux)
|
|
file-system LFS # log-structured file system
|
|
file-system MFS # memory file system
|
|
file-system NFS # Network File System client
|
|
file-system NTFS # Windows/NT file system (experimental)
|
|
file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
file-system MSDOSFS # MS-DOS file system
|
|
file-system FDESC # /dev/fd
|
|
file-system KERNFS # /kern
|
|
file-system NULLFS # loopback file system
|
|
file-system OVERLAY # overlay file system
|
|
file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs)
|
|
file-system PROCFS # /proc
|
|
file-system UMAPFS # NULLFS + uid and gid remapping
|
|
file-system UNION # union file system
|
|
file-system CODA # Coda File System; also needs vcoda (below)
|
|
file-system PTYFS # /dev/ptm support
|
|
file-system TMPFS # Efficient memory file-system
|
|
file-system UDF # experimental - OSTA UDF CD/DVD file-system
|
|
file-system HFS # experimental - Apple HFS+ (read-only)
|
|
|
|
# File system options
|
|
options QUOTA # legacy UFS quotas
|
|
options QUOTA2 # new, in-filesystem UFS quotas
|
|
options DISKLABEL_EI # disklabel Endian Independent support
|
|
options FFS_EI # FFS Endian Independent support
|
|
options WAPBL # File system journaling support
|
|
# Note that UFS_DIRHASH is suspected of causing kernel memory corruption.
|
|
# It is not recommended for general use.
|
|
#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental
|
|
options NFSSERVER # Network File System server
|
|
#options FFS_NO_SNAPSHOT # No FFS snapshot support
|
|
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
|
|
# immutable) behave as system flags.
|
|
|
|
# Networking options
|
|
|
|
#options GATEWAY # packet forwarding
|
|
options INET # IP + ICMP + TCP + UDP
|
|
options INET6 # IPv6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
#options MROUTING # IP multicast routing
|
|
#options PIM # Protocol Independent Multicast
|
|
options NETATALK # AppleTalk networking protocols
|
|
options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
|
options PPP_DEFLATE # Deflate compression support for PPP
|
|
options PPP_FILTER # Active filter support for PPP (requires bpf)
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
options NFS_BOOT_BOOTP
|
|
options NFS_BOOT_DHCP
|
|
#options NFS_BOOT_BOOTPARAM
|
|
|
|
# Compatibility options
|
|
|
|
include "conf/compat_netbsd16.config"
|
|
options COMPAT_NETBSD32 # allow running arm (e.g. non-earm) binaries
|
|
|
|
# Shared memory options
|
|
|
|
options SYSVMSG # System V-like message queues
|
|
options SYSVSEM # System V-like semaphores
|
|
options SYSVSHM # System V-like memory sharing
|
|
|
|
# Device options
|
|
|
|
#options MEMORY_DISK_HOOKS # boottime setup of ramdisk
|
|
#options MEMORY_DISK_IS_ROOT # use memory disk as root
|
|
#options MEMORY_DISK_DYNAMIC
|
|
#options MEMORY_DISK_ROOT_SIZE=22528 # Size in blocks
|
|
#options MEMORY_RBFLAGS=RB_AUTOBOOT
|
|
|
|
# Miscellaneous kernel options
|
|
|
|
options KTRACE # system call tracing, a la ktrace(1)
|
|
options IRQSTATS # manage IRQ statistics
|
|
options MIIVERBOSE # Verbose MII autoconfuration messages
|
|
options PCIVERBOSE # Verbose PCI descriptions
|
|
options USBVERBOSE # verbose USB device autoconfig messages
|
|
#options DDB_KEYCODE=0x40
|
|
#options USERCONF # userconf(4) support
|
|
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
|
|
|
|
|
|
config netbsd root on ? type ?
|
|
|
|
# The main bus device
|
|
mainbus0 at root
|
|
|
|
# The boot cpu
|
|
cpu0 at mainbus?
|
|
|
|
# Marvell MV88Fxx81 Orion System-on-Chip
|
|
mvsoc0 at mainbus?
|
|
|
|
# On-chip PCI Express Interface
|
|
mvpex* at mvsoc? offset ? irq ?
|
|
|
|
# On-chip PCI Interface
|
|
gtpci* at mvsoc? offset ? irq ?
|
|
|
|
# PCI bus support
|
|
options PCI_NETBSD_CONFIGURE
|
|
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
|
|
|
|
pci* at mvpex?
|
|
pci* at gtpci?
|
|
|
|
pchb* at pci? dev ? function ? # PCI-Host bridges
|
|
|
|
# On-chip Serial-ATA II Host Controller (SATAHC)
|
|
mvsata* at mvsoc? offset ? irq ?
|
|
|
|
# On-chip Gigabit Ethernet Controller Interface
|
|
mvgbec* at mvsoc? offset ?
|
|
mvgbe* at mvgbec? port ? irq ?
|
|
|
|
# On-chip USB 2.0 Interface
|
|
ehci* at mvsoc? offset ? irq ?
|
|
|
|
# On-chip Cryptographic Engines and Security Accelerator
|
|
mvcesa* at mvsoc? offset ? irq ?
|
|
|
|
# On-chip Two-Wire Serial Interface (TWSI)
|
|
gttwsi* at mvsoc? offset ? irq ?
|
|
iic* at gttwsi? # I2C bus
|
|
|
|
# On-chip UART Interface
|
|
com* at mvsoc? offset ? irq ?
|
|
|
|
# On-chip IDMA Controller
|
|
gtidmac* at mvsoc? offset ? irq ?
|
|
|
|
# On-chip General Purpose I/O Port Interface
|
|
mvsocgpp* at mvsoc? offset ? irq ?
|
|
gpio* at mvsocgpp?
|
|
|
|
# On-chip Timers
|
|
mvsoctmr* at mvsoc? offset ? irq ?
|
|
|
|
|
|
# MII/PHY support
|
|
makphy* at mii? phy ? # Marvell Semiconductor 88E1000 PHYs
|
|
|
|
# PCI IDE Controller
|
|
mvsata* at pci? dev ? function ? # Marvell SATA Controller
|
|
|
|
# ATA (IDE) bus support
|
|
atabus* at ata?
|
|
#options ATADEBUG
|
|
|
|
# IDE drives
|
|
wd* at atabus? drive? flags 0x0000
|
|
|
|
# ATAPI bus support
|
|
atapibus* at atapi?
|
|
|
|
# ATAPI devices
|
|
# flags have the same meaning as for IDE drives.
|
|
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
|
|
|
|
# SCSI bus support
|
|
scsibus* at scsi?
|
|
|
|
# SCSI devices
|
|
sd* at scsibus? target ? lun ? # SCSI disk drives
|
|
|
|
# USB bus support
|
|
usb* at ehci?
|
|
|
|
# USB Hubs
|
|
uhub* at usb?
|
|
uhub* at uhub? port ?
|
|
|
|
# USB Mass Storage
|
|
umass* at uhub? port ? configuration ? interface ?
|
|
|
|
# USB Serial
|
|
uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter
|
|
ucom* at uplcom? portno ?
|
|
|
|
# Wedge support
|
|
options DKWEDGE_AUTODISCOVER # Automatically add dk(4) instances
|
|
options DKWEDGE_METHOD_GPT # Supports GPT partitions as wedges
|
|
|
|
# Alternate buffer queue strategies for better responsiveness under high
|
|
# disk I/O load.
|
|
#options BUFQ_READPRIO
|
|
options BUFQ_PRIOCSCAN
|
|
|
|
# Development and Debugging options
|
|
|
|
#options DIAGNOSTIC # internal consistency checks
|
|
#options DEBUG
|
|
#options LOCKDEBUG
|
|
#options UVMHIST # kernhist for uvm/pmap subsystems
|
|
#options VERBOSE_INIT_ARM # verbose bootstraping messages
|
|
options DDB # in-kernel debugger
|
|
options DDB_ONPANIC=0
|
|
options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
|
|
#options DDB_COMMANDONENTER="bt"
|
|
#options KGDB
|
|
#options SYSCALL_DEBUG
|
|
|
|
|
|
# Pseudo-Devices
|
|
|
|
pseudo-device crypto # /dev/crypto device
|
|
pseudo-device swcrypto # software crypto implementation
|
|
|
|
# disk/mass storage pseudo-devices
|
|
pseudo-device bio # RAID control device driver
|
|
pseudo-device ccd # concatenated/striped disk devices
|
|
pseudo-device cgd # cryptographic disk devices
|
|
pseudo-device raid # RAIDframe disk driver
|
|
options RAID_AUTOCONFIG # auto-configuration of RAID components
|
|
# Options to enable various other RAIDframe RAID types.
|
|
#options RF_INCLUDE_EVENODD=1
|
|
#options RF_INCLUDE_RAID5_RS=1
|
|
#options RF_INCLUDE_PARITYLOGGING=1
|
|
#options RF_INCLUDE_CHAINDECLUSTER=1
|
|
#options RF_INCLUDE_INTERDECLUSTER=1
|
|
#options RF_INCLUDE_PARITY_DECLUSTERING=1
|
|
#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
|
|
pseudo-device fss # file system snapshot device
|
|
pseudo-device putter # for puffs and pud
|
|
|
|
#pseudo-device md # memory disk device (ramdisk)
|
|
pseudo-device vnd # disk-like interface to files
|
|
options VND_COMPRESSION # compressed vnd(4)
|
|
|
|
# network pseudo-devices
|
|
pseudo-device bpfilter # Berkeley packet filter
|
|
#pseudo-device carp # Common Address Redundancy Protocol
|
|
pseudo-device loop # network loopback
|
|
#pseudo-device ppp # Point-to-Point Protocol
|
|
#pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
|
#pseudo-device sl # Serial Line IP
|
|
#pseudo-device irframetty # IrDA frame line discipline
|
|
#pseudo-device tap # virtual Ethernet
|
|
pseudo-device tun # network tunneling over tty
|
|
#pseudo-device gre # generic L3 over IP tunnel
|
|
#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC 1933)
|
|
#pseudo-device faith # IPv[46] TCP relay translation i/f
|
|
#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
|
|
#pseudo-device vlan # IEEE 802.1q encapsulation
|
|
#pseudo-device bridge # simple inter-network bridging
|
|
#pseudo-device vether # Virtual Ethernet for bridge
|
|
#pseudo-device agr # IEEE 802.3ad link aggregation
|
|
pseudo-device npf # NPF packet filter
|
|
|
|
# miscellaneous pseudo-devices
|
|
pseudo-device pty # pseudo-terminals
|
|
#pseudo-device sequencer # MIDI sequencer
|
|
#options RND_COM
|
|
pseudo-device clockctl # user control of clock subsystem
|
|
pseudo-device ksyms # /dev/ksyms
|
|
#pseudo-device bcsp # BlueCore Serial Protocol
|
|
#pseudo-device btuart # Bluetooth HCI UART (H4)
|
|
|
|
# a pseudo device needed for Coda # also needs CODA (above)
|
|
pseudo-device vcoda # coda minicache <-> venus comm.
|
|
|
|
# wscons pseudo-devices
|
|
pseudo-device wsmux # mouse & keyboard multiplexor
|
|
pseudo-device wsfont
|
|
|
|
# data mover pseudo-devices
|
|
pseudo-device swdmover # software dmover(9) back-end
|
|
pseudo-device dmoverio # /dev/dmover dmover(9) interface
|
|
|
|
# Veriexec
|
|
include "dev/veriexec.config"
|
|
|
|
options PAX_MPROTECT=0 # PaX mprotect(2) restrictions
|
|
options PAX_ASLR=0 # PaX Address Space Layout Randomization
|