129 lines
6.4 KiB
Plaintext
129 lines
6.4 KiB
Plaintext
Find your favorite disk partitioning utility. Any formatter capable of
|
|
partitioning a SCSI disk should work. Some of the ones that have been
|
|
tried and seem to work are:
|
|
HD SC Setup from Apple
|
|
Hard Disk ToolKit from FWB
|
|
SCSI Director Lite
|
|
Disk Manager Mac from OnTrack
|
|
Silverlining from LaCie
|
|
APS Disk Tools
|
|
|
|
<<<<<<< prep
|
|
Apple's HD SC Setup is probably the easiest to use and the most commonly
|
|
available. Instructions for patching HD SC Setup so that it will recognize
|
|
non-Apple drives is available at:
|
|
http://www.euronet.nl/users/ernstoud/patch.html
|
|
|
|
First, you need to choose a drive on which to install NetBSD. Try to pick a
|
|
drive with a low SCSI ID number, especially if you are likely to add or
|
|
remove drives to your SCSI chain in the future.
|
|
|
|
NOTE: BE SURE YOU HAVE A RELIABLE BACKUP OF ANY DATA WHICH YOU MAY WANT TO
|
|
KEEP. REPARTITIONING YOUR HARD DRIVE IS AN EXCELLENT WAY TO DESTROY
|
|
IMPORTANT DATA.
|
|
|
|
Second, decide how you want to set up your partitions. At minimum, you
|
|
need a partition to hold the NetBSD installation (the root partition) and a
|
|
partition to serve as swap. You may choose to use more than one partition
|
|
to hold the installation. This allows you to separate the more vital
|
|
portions of the filesystem (such as the kernel and the /etc directory) from
|
|
the more volatile parts of the filesystem. Typical setups place the /usr
|
|
directory on a separate partition from the root partition. Generally, the
|
|
root partition can be fairly small while the /usr partition should be
|
|
fairly large. If you plan to use this machine as a server, you may also
|
|
want a separate /var partition.
|
|
|
|
Once you have decided how to lay out your partitions, you need to calculate
|
|
how much space to allocate to each partition. A minimal install of NetBSD
|
|
(i.e. netbsd.tgz, base.tgz, and etc.tgz) should fit in a 30M partition.
|
|
For a full installation, you should allocate at least 80M. A general rule
|
|
of thumb for sizing the swap partition is to allocate twice as much swap
|
|
space as you have real memory. Having your swap + real memory total at
|
|
least 20M is also a good idea. Systems that will be heavily used or that
|
|
are low on real memory should have more swap space allocated. Systems that
|
|
will be only lightly used or have a very large amount of real memory can
|
|
get away with less.
|
|
||||||| 1.2
|
|
Apple's HD SC Setup is probably the easiest to use and the most
|
|
commonly available. Instructions for patching HD SC Setup
|
|
so that it will recognize non-Apple drives is available at:
|
|
http://www.euronet.nl/users/ernstoud/patch.html
|
|
|
|
First, you need to choose a drive on which to install NetBSD.
|
|
Try to pick a drive with a low SCSI ID number, especially if you
|
|
are likely to add or remove drives to your SCSI chain in the
|
|
future.
|
|
|
|
** NOTE: be sure you have a reliable backup of any data
|
|
** which you may want to keep. Repartitioning your hard
|
|
** drive is an excellent way to destroy important data.
|
|
|
|
Second, decide how you want to set up your partitions. At
|
|
minimum, you need a partition to hold the NetBSD installation (the
|
|
root partition) and a partition to serve as swap. You may choose
|
|
to use more than one partition to hold the installation. This
|
|
allows you to separate the more vital portions of the filesystem
|
|
(such as the kernel and the /etc directory) from the more volatile
|
|
parts of the filesystem. Typical setups place the /usr directory
|
|
on a separate partition from the root partition. Generally, the
|
|
root partition can be fairly small while the /usr partition should
|
|
be fairly large. If you plan to use this machine as a server, you
|
|
may also want a separate /var partition.
|
|
|
|
Once you have decided how to lay out your partitions, you need
|
|
calculate how much space to allocate to each partition. A minimal
|
|
install of NetBSD (i.e. netbsd13, base13, and etc13) should fit in
|
|
a 30M partition. For a full installation, you should allocate at
|
|
least 80M. A general rule of thumb for sizing the swap partition
|
|
is to allocate twice as much swap space as you have real memory.
|
|
Having your swap + real memory total at least 20M is also a good
|
|
ideo. Systems that will be heavily used or that are low on real
|
|
memory should have more swap space allocated. Systems that
|
|
will be only lightly used or have a very large amount of real
|
|
memory can get away with less.
|
|
=======
|
|
Apple's HD SC Setup is probably the easiest to use and the most
|
|
commonly available. Instructions for patching HD SC Setup
|
|
so that it will recognize non-Apple drives is available at:
|
|
http://www.euronet.nl/users/ernstoud/patch.html
|
|
|
|
First, you need to choose a drive on which to install NetBSD.
|
|
Try to pick a drive with a low SCSI ID number, especially if you
|
|
are likely to add or remove drives to your SCSI chain in the
|
|
future.
|
|
|
|
NOTE: BE SURE YOU HAVE A RELIABLE BACKUP OF ANY DATA WHICH YOU
|
|
MAY WANT TO KEEP. REPARTITIONING YOUR HARD DRIVE IS AN EXCELLENT
|
|
WAY TO DESTROY IMPORTANT DATA.
|
|
|
|
Second, decide how you want to set up your partitions. At
|
|
minimum, you need a partition to hold the NetBSD installation (the
|
|
root partition) and a partition to serve as swap. You may choose
|
|
to use more than one partition to hold the installation. This
|
|
allows you to separate the more vital portions of the filesystem
|
|
(such as the kernel and the /etc directory) from the more volatile
|
|
parts of the filesystem. Typical setups place the /usr directory
|
|
on a separate partition from the root partition. Generally, the
|
|
root partition can be fairly small while the /usr partition should
|
|
be fairly large. If you plan to use this machine as a server, you
|
|
may also want a separate /var partition.
|
|
|
|
Once you have decided how to lay out your partitions, you need
|
|
calculate how much space to allocate to each partition. A minimal
|
|
install of NetBSD (i.e. netbsd13, base13, and etc13) should fit in
|
|
a 30M partition. For a full installation, you should allocate at
|
|
least 80M. A general rule of thumb for sizing the swap partition
|
|
is to allocate twice as much swap space as you have real memory.
|
|
Having your swap + real memory total at least 20M is also a good
|
|
ideo. Systems that will be heavily used or that are low on real
|
|
memory should have more swap space allocated. Systems that
|
|
will be only lightly used or have a very large amount of real
|
|
memory can get away with less.
|
|
>>>>>>> 1.3
|
|
|
|
Next, use your favorite partitioning utility to make partitions of the
|
|
necessary sizes. You can use any type of partition, but partitions of type
|
|
"Apple_Free" might save you some confusion in the future.
|
|
|
|
You are now set to install NetBSD on your hard drive.
|