NetBSD/sys/kern/init_main.c

924 lines
23 KiB
C

/* $NetBSD: init_main.c,v 1.363 2008/08/30 09:20:13 reinoud Exp $ */
/*-
* Copyright (c) 2008 The NetBSD Foundation, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1982, 1986, 1989, 1991, 1992, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* All or some portions of this file are derived from material licensed
* to the University of California by American Telephone and Telegraph
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
* the permission of UNIX System Laboratories, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)init_main.c 8.16 (Berkeley) 5/14/95
*/
/*
* Copyright (c) 1995 Christopher G. Demetriou. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)init_main.c 8.16 (Berkeley) 5/14/95
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: init_main.c,v 1.363 2008/08/30 09:20:13 reinoud Exp $");
#include "opt_ipsec.h"
#include "opt_ntp.h"
#include "opt_pipe.h"
#include "opt_posix.h"
#include "opt_syscall_debug.h"
#include "opt_sysv.h"
#include "opt_fileassoc.h"
#include "opt_ktrace.h"
#include "opt_pax.h"
#include "opt_wapbl.h"
#include "rnd.h"
#include "sysmon_envsys.h"
#include "sysmon_power.h"
#include "sysmon_taskq.h"
#include "sysmon_wdog.h"
#include "veriexec.h"
#include <sys/param.h>
#include <sys/acct.h>
#include <sys/filedesc.h>
#include <sys/file.h>
#include <sys/errno.h>
#include <sys/callout.h>
#include <sys/cpu.h>
#include <sys/kernel.h>
#include <sys/kmem.h>
#include <sys/mount.h>
#include <sys/proc.h>
#include <sys/kthread.h>
#include <sys/resourcevar.h>
#include <sys/signalvar.h>
#include <sys/systm.h>
#include <sys/vnode.h>
#include <sys/fstrans.h>
#include <sys/tty.h>
#include <sys/conf.h>
#include <sys/disklabel.h>
#include <sys/buf.h>
#include <sys/device.h>
#include <sys/exec.h>
#include <sys/socketvar.h>
#include <sys/protosw.h>
#include <sys/percpu.h>
#include <sys/pset.h>
#include <sys/sysctl.h>
#include <sys/reboot.h>
#include <sys/user.h>
#include <sys/sysctl.h>
#include <sys/event.h>
#include <sys/mbuf.h>
#include <sys/sched.h>
#include <sys/sleepq.h>
#include <sys/iostat.h>
#include <sys/vmem.h>
#include <sys/uuid.h>
#include <sys/extent.h>
#include <sys/disk.h>
#include <sys/mqueue.h>
#include <sys/msgbuf.h>
#include <sys/module.h>
#include <sys/event.h>
#include <sys/lockf.h>
#ifdef FAST_IPSEC
#include <netipsec/ipsec.h>
#endif
#ifdef SYSVSHM
#include <sys/shm.h>
#endif
#ifdef SYSVSEM
#include <sys/sem.h>
#endif
#ifdef SYSVMSG
#include <sys/msg.h>
#endif
#ifdef P1003_1B_SEMAPHORE
#include <sys/ksem.h>
#endif
#include <sys/domain.h>
#include <sys/namei.h>
#if NRND > 0
#include <sys/rnd.h>
#endif
#include <sys/pipe.h>
#ifdef LKM
#include <sys/lkm.h>
#endif
#if NVERIEXEC > 0
#include <sys/verified_exec.h>
#endif /* NVERIEXEC > 0 */
#ifdef KTRACE
#include <sys/ktrace.h>
#endif
#include <sys/kauth.h>
#ifdef WAPBL
#include <sys/wapbl.h>
#endif
#include <net80211/ieee80211_netbsd.h>
#include <sys/syscall.h>
#include <sys/syscallargs.h>
#if defined(PAX_MPROTECT) || defined(PAX_SEGVGUARD) || defined(PAX_ASLR)
#include <sys/pax.h>
#endif /* PAX_MPROTECT || PAX_SEGVGUARD || PAX_ASLR */
#include <ufs/ufs/quota.h>
#include <miscfs/genfs/genfs.h>
#include <miscfs/syncfs/syncfs.h>
#include <sys/cpu.h>
#include <uvm/uvm.h>
#if NSYSMON_TASKQ > 0
#include <dev/sysmon/sysmon_taskq.h>
#endif
#include <dev/cons.h>
#if NSYSMON_ENVSYS > 0 || NSYSMON_POWER > 0 || NSYSMON_WDOG > 0
#include <dev/sysmon/sysmonvar.h>
#endif
#include <net/if.h>
#include <net/raw_cb.h>
#include <secmodel/secmodel.h>
extern struct proc proc0;
extern struct lwp lwp0;
extern struct cwdinfo cwdi0;
extern time_t rootfstime;
#ifndef curlwp
struct lwp *curlwp = &lwp0;
#endif
struct proc *initproc;
struct vnode *rootvp, *swapdev_vp;
int boothowto;
int cold = 1; /* still working on startup */
struct timeval boottime; /* time at system startup - will only follow settime deltas */
int start_init_exec; /* semaphore for start_init() */
static void check_console(struct lwp *l);
static void start_init(void *);
void main(void);
void ssp_init(void);
#if defined(__SSP__) || defined(__SSP_ALL__)
long __stack_chk_guard[8] = {0, 0, 0, 0, 0, 0, 0, 0};
void __stack_chk_fail(void);
void
__stack_chk_fail(void)
{
panic("stack overflow detected; terminated");
}
void
ssp_init(void)
{
int s;
#ifdef DIAGNOSTIC
printf("Initializing SSP:");
#endif
/*
* We initialize ssp here carefully:
* 1. after we got some entropy
* 2. without calling a function
*/
size_t i;
long guard[__arraycount(__stack_chk_guard)];
arc4randbytes(guard, sizeof(guard));
s = splhigh();
for (i = 0; i < __arraycount(guard); i++)
__stack_chk_guard[i] = guard[i];
splx(s);
#ifdef DIAGNOSTIC
for (i = 0; i < __arraycount(guard); i++)
printf("%lx ", guard[i]);
printf("\n");
#endif
}
#else
void
ssp_init(void)
{
}
#endif
void __secmodel_none(void);
__weak_alias(secmodel_start,__secmodel_none);
void
__secmodel_none(void)
{
return;
}
/*
* System startup; initialize the world, create process 0, mount root
* filesystem, and fork to create init and pagedaemon. Most of the
* hard work is done in the lower-level initialization routines including
* startup(), which does memory initialization and autoconfiguration.
*/
void
main(void)
{
struct timeval time;
struct lwp *l;
struct proc *p;
int s, error;
#ifdef NVNODE_IMPLICIT
int usevnodes;
#endif
CPU_INFO_ITERATOR cii;
struct cpu_info *ci;
l = &lwp0;
#ifndef LWP0_CPU_INFO
l->l_cpu = curcpu();
#endif
/*
* Attempt to find console and initialize
* in case of early panic or other messages.
*/
consinit();
kernel_lock_init();
uvm_init();
kmem_init();
percpu_init();
/* Initialize lock caches. */
mutex_obj_init();
/* Initialize the extent manager. */
extent_init();
/* Do machine-dependent initialization. */
cpu_startup();
/* Initialize callouts, part 1. */
callout_startup();
/*
* Initialize the kernel authorization subsystem and start the
* default security model, if any. We need to do this early
* enough so that subsystems relying on any of the aforementioned
* can work properly. Since the security model may dictate the
* credential inheritance policy, it is needed at least before
* any process is created, specifically proc0.
*/
kauth_init();
secmodel_start();
/* Initialize the buffer cache */
bufinit();
/* Initialize sockets. */
soinit();
/*
* The following things must be done before autoconfiguration.
*/
evcnt_init(); /* initialize event counters */
#if NRND > 0
rnd_init(); /* initialize random number generator */
#endif
/* Initialize process and pgrp structures. */
procinit();
lwpinit();
/* Initialize signal-related data structures. */
signal_init();
/* Initialize resource management. */
resource_init();
/* Create process 0 (the swapper). */
proc0_init();
/* Initialize the UID hash table. */
uid_init();
/* Charge root for one process. */
(void)chgproccnt(0, 1);
/* Initialize timekeeping. */
time_init();
/* Initialize the run queues, turnstiles and sleep queues. */
mutex_init(&cpu_lock, MUTEX_DEFAULT, IPL_NONE);
sched_rqinit();
turnstile_init();
sleeptab_init(&sleeptab);
/* Initialize processor-sets */
psets_init();
/* MI initialization of the boot cpu */
error = mi_cpu_attach(curcpu());
KASSERT(error == 0);
/* Initialize timekeeping, part 2. */
time_init2();
/*
* Initialize mbuf's. Do this now because we might attempt to
* allocate mbufs or mbuf clusters during autoconfiguration.
*/
mbinit();
/* Initialize the sysctl subsystem. */
sysctl_init();
/* Initialize I/O statistics. */
iostat_init();
/* Initialize the log device. */
loginit();
/* Start module system. */
module_init();
/* Initialize the file systems. */
#ifdef NVNODE_IMPLICIT
/*
* If maximum number of vnodes in namei vnode cache is not explicitly
* defined in kernel config, adjust the number such as we use roughly
* 10% of memory for vnodes and associated data structures in the
* assumed worst case. Do not provide fewer than NVNODE vnodes.
*/
usevnodes =
calc_cache_size(kernel_map, 10, VNODE_VA_MAXPCT) / VNODE_COST;
if (usevnodes > desiredvnodes)
desiredvnodes = usevnodes;
#endif
vfsinit();
lf_init();
/* Initialize fstrans. */
fstrans_init();
/* Initialize the file descriptor system. */
fd_sys_init();
/* Initialize kqueue. */
kqueue_init();
/* Initialize asynchronous I/O. */
aio_sysinit();
/* Initialize message queues. */
mqueue_sysinit();
/* Initialize the system monitor subsystems. */
#if NSYSMON_TASKQ > 0
sysmon_task_queue_preinit();
#endif
#if NSYSMON_ENVSYS > 0
sysmon_envsys_init();
#endif
#if NSYSMON_POWER > 0
sysmon_power_init();
#endif
#if NSYSMON_WDOG > 0
sysmon_wdog_init();
#endif
inittimecounter();
ntp_init();
/* Initialize the device switch tables. */
devsw_init();
/* Initialize tty subsystem. */
tty_init();
ttyldisc_init();
/* Initialize the buffer cache, part 2. */
bufinit2();
/* Initialize the disk wedge subsystem. */
dkwedge_init();
/* Initialize interfaces. */
ifinit1();
/* Configure the system hardware. This will enable interrupts. */
configure();
ubc_init(); /* must be after autoconfig */
#ifdef SYSVSHM
/* Initialize System V style shared memory. */
shminit();
#endif
#ifdef SYSVSEM
/* Initialize System V style semaphores. */
seminit();
#endif
#ifdef SYSVMSG
/* Initialize System V style message queues. */
msginit();
#endif
#ifdef P1003_1B_SEMAPHORE
/* Initialize posix semaphores */
ksem_init();
#endif
#if NVERIEXEC > 0
/*
* Initialise the Veriexec subsystem.
*/
veriexec_init();
#endif /* NVERIEXEC > 0 */
#if defined(PAX_MPROTECT) || defined(PAX_SEGVGUARD) || defined(PAX_ASLR)
pax_init();
#endif /* PAX_MPROTECT || PAX_SEGVGUARD || PAX_ASLR */
#ifdef FAST_IPSEC
/* Attach network crypto subsystem */
ipsec_attach();
#endif
/*
* Initialize protocols. Block reception of incoming packets
* until everything is ready.
*/
s = splnet();
ifinit();
domaininit();
if_attachdomain();
splx(s);
#ifdef GPROF
/* Initialize kernel profiling. */
kmstartup();
#endif
/* Initialize system accounting. */
acct_init();
#ifndef PIPE_SOCKETPAIR
/* Initialize pipes. */
pipe_init();
#endif
#ifdef KTRACE
/* Initialize ktrace. */
ktrinit();
#endif
/* Initialize the UUID system calls. */
uuid_init();
#ifdef WAPBL
/* Initialize write-ahead physical block logging. */
wapbl_init();
#endif
/*
* Create process 1 (init(8)). We do this now, as Unix has
* historically had init be process 1, and changing this would
* probably upset a lot of people.
*
* Note that process 1 won't immediately exec init(8), but will
* wait for us to inform it that the root file system has been
* mounted.
*/
if (fork1(l, 0, SIGCHLD, NULL, 0, start_init, NULL, NULL, &initproc))
panic("fork init");
/*
* Load any remaining builtin modules, and hand back temporary
* storage to the VM system.
*/
module_init_class(MODULE_CLASS_ANY);
/*
* Finalize configuration now that all real devices have been
* found. This needs to be done before the root device is
* selected, since finalization may create the root device.
*/
config_finalize();
/*
* Now that autoconfiguration has completed, we can determine
* the root and dump devices.
*/
cpu_rootconf();
cpu_dumpconf();
/* Mount the root file system. */
do {
domountroothook();
if ((error = vfs_mountroot())) {
printf("cannot mount root, error = %d\n", error);
boothowto |= RB_ASKNAME;
setroot(root_device,
(rootdev != NODEV) ? DISKPART(rootdev) : 0);
}
} while (error != 0);
mountroothook_destroy();
/*
* Initialise the time-of-day clock, passing the time recorded
* in the root filesystem (if any) for use by systems that
* don't have a non-volatile time-of-day device.
*/
inittodr(rootfstime);
CIRCLEQ_FIRST(&mountlist)->mnt_flag |= MNT_ROOTFS;
CIRCLEQ_FIRST(&mountlist)->mnt_op->vfs_refcount++;
/*
* Get the vnode for '/'. Set filedesc0.fd_fd.fd_cdir to
* reference it.
*/
error = VFS_ROOT(CIRCLEQ_FIRST(&mountlist), &rootvnode);
if (error)
panic("cannot find root vnode, error=%d", error);
cwdi0.cwdi_cdir = rootvnode;
VREF(cwdi0.cwdi_cdir);
VOP_UNLOCK(rootvnode, 0);
cwdi0.cwdi_rdir = NULL;
/*
* Now that root is mounted, we can fixup initproc's CWD
* info. All other processes are kthreads, which merely
* share proc0's CWD info.
*/
initproc->p_cwdi->cwdi_cdir = rootvnode;
VREF(initproc->p_cwdi->cwdi_cdir);
initproc->p_cwdi->cwdi_rdir = NULL;
/*
* Now can look at time, having had a chance to verify the time
* from the file system. Reset l->l_rtime as it may have been
* munched in mi_switch() after the time got set.
*/
getmicrotime(&time);
boottime = time;
mutex_enter(proc_lock);
LIST_FOREACH(p, &allproc, p_list) {
KASSERT((p->p_flag & PK_MARKER) == 0);
mutex_enter(p->p_lock);
p->p_stats->p_start = time;
LIST_FOREACH(l, &p->p_lwps, l_sibling) {
lwp_lock(l);
memset(&l->l_rtime, 0, sizeof(l->l_rtime));
lwp_unlock(l);
}
mutex_exit(p->p_lock);
}
mutex_exit(proc_lock);
binuptime(&curlwp->l_stime);
for (CPU_INFO_FOREACH(cii, ci)) {
ci->ci_schedstate.spc_lastmod = time_second;
}
/* Create the pageout daemon kernel thread. */
uvm_swap_init();
if (kthread_create(PRI_PGDAEMON, KTHREAD_MPSAFE, NULL, uvm_pageout,
NULL, NULL, "pgdaemon"))
panic("fork pagedaemon");
/* Create the filesystem syncer kernel thread. */
if (kthread_create(PRI_IOFLUSH, KTHREAD_MPSAFE, NULL, sched_sync,
NULL, NULL, "ioflush"))
panic("fork syncer");
/* Create the aiodone daemon kernel thread. */
if (workqueue_create(&uvm.aiodone_queue, "aiodoned",
uvm_aiodone_worker, NULL, PRI_VM, IPL_NONE, WQ_MPSAFE))
panic("fork aiodoned");
vmem_rehash_start();
/* Initialize exec structures */
exec_init(1);
/*
* Okay, now we can let init(8) exec! It's off to userland!
*/
mutex_enter(proc_lock);
start_init_exec = 1;
cv_broadcast(&lbolt);
mutex_exit(proc_lock);
/* The scheduler is an infinite loop. */
uvm_scheduler();
/* NOTREACHED */
}
static void
check_console(struct lwp *l)
{
struct nameidata nd;
int error;
NDINIT(&nd, LOOKUP, FOLLOW, UIO_SYSSPACE, "/dev/console");
error = namei(&nd);
if (error == 0)
vrele(nd.ni_vp);
else if (error == ENOENT)
printf("warning: no /dev/console\n");
else
printf("warning: lookup /dev/console: error %d\n", error);
}
/*
* List of paths to try when searching for "init".
*/
static const char * const initpaths[] = {
"/sbin/init",
"/sbin/oinit",
"/sbin/init.bak",
NULL,
};
/*
* Start the initial user process; try exec'ing each pathname in "initpaths".
* The program is invoked with one argument containing the boot flags.
*/
static void
start_init(void *arg)
{
struct lwp *l = arg;
struct proc *p = l->l_proc;
vaddr_t addr;
struct sys_execve_args /* {
syscallarg(const char *) path;
syscallarg(char * const *) argp;
syscallarg(char * const *) envp;
} */ args;
int options, i, error;
register_t retval[2];
char flags[4], *flagsp;
const char *path, *slash;
char *ucp, **uap, *arg0, *arg1 = NULL;
char ipath[129];
int ipx, len;
/*
* Now in process 1.
*/
strncpy(p->p_comm, "init", MAXCOMLEN);
/*
* Wait for main() to tell us that it's safe to exec.
*/
mutex_enter(proc_lock);
while (start_init_exec == 0)
cv_wait(&lbolt, proc_lock);
mutex_exit(proc_lock);
/*
* This is not the right way to do this. We really should
* hand-craft a descriptor onto /dev/console to hand to init,
* but that's a _lot_ more work, and the benefit from this easy
* hack makes up for the "good is the enemy of the best" effect.
*/
check_console(l);
/*
* Need just enough stack to hold the faked-up "execve()" arguments.
*/
addr = (vaddr_t)STACK_ALLOC(USRSTACK, PAGE_SIZE);
if (uvm_map(&p->p_vmspace->vm_map, &addr, PAGE_SIZE,
NULL, UVM_UNKNOWN_OFFSET, 0,
UVM_MAPFLAG(UVM_PROT_ALL, UVM_PROT_ALL, UVM_INH_COPY,
UVM_ADV_NORMAL,
UVM_FLAG_FIXED|UVM_FLAG_OVERLAY|UVM_FLAG_COPYONW)) != 0)
panic("init: couldn't allocate argument space");
p->p_vmspace->vm_maxsaddr = (void *)STACK_MAX(addr, PAGE_SIZE);
ipx = 0;
while (1) {
if (boothowto & RB_ASKNAME) {
printf("init path");
if (initpaths[ipx])
printf(" (default %s)", initpaths[ipx]);
printf(": ");
len = cngetsn(ipath, sizeof(ipath)-1);
if (len == 0) {
if (initpaths[ipx])
path = initpaths[ipx++];
else
continue;
} else {
ipath[len] = '\0';
path = ipath;
}
} else {
if ((path = initpaths[ipx++]) == NULL)
break;
}
ucp = (char *)USRSTACK;
/*
* Construct the boot flag argument.
*/
flagsp = flags;
*flagsp++ = '-';
options = 0;
if (boothowto & RB_SINGLE) {
*flagsp++ = 's';
options = 1;
}
#ifdef notyet
if (boothowto & RB_FASTBOOT) {
*flagsp++ = 'f';
options = 1;
}
#endif
/*
* Move out the flags (arg 1), if necessary.
*/
if (options != 0) {
*flagsp++ = '\0';
i = flagsp - flags;
#ifdef DEBUG
printf("init: copying out flags `%s' %d\n", flags, i);
#endif
arg1 = STACK_ALLOC(ucp, i);
ucp = STACK_MAX(arg1, i);
(void)copyout((void *)flags, arg1, i);
}
/*
* Move out the file name (also arg 0).
*/
i = strlen(path) + 1;
#ifdef DEBUG
printf("init: copying out path `%s' %d\n", path, i);
#else
if (boothowto & RB_ASKNAME || path != initpaths[0])
printf("init: trying %s\n", path);
#endif
arg0 = STACK_ALLOC(ucp, i);
ucp = STACK_MAX(arg0, i);
(void)copyout(path, arg0, i);
/*
* Move out the arg pointers.
*/
ucp = (void *)STACK_ALIGN(ucp, ALIGNBYTES);
uap = (char **)STACK_ALLOC(ucp, sizeof(char *) * 3);
SCARG(&args, path) = arg0;
SCARG(&args, argp) = uap;
SCARG(&args, envp) = NULL;
slash = strrchr(path, '/');
if (slash)
(void)suword((void *)uap++,
(long)arg0 + (slash + 1 - path));
else
(void)suword((void *)uap++, (long)arg0);
if (options != 0)
(void)suword((void *)uap++, (long)arg1);
(void)suword((void *)uap++, 0); /* terminator */
/*
* Now try to exec the program. If can't for any reason
* other than it doesn't exist, complain.
*/
error = sys_execve(l, &args, retval);
if (error == 0 || error == EJUSTRETURN) {
KERNEL_UNLOCK_LAST(l);
return;
}
printf("exec %s: error %d\n", path, error);
}
printf("init: not found\n");
panic("no init");
}
/*
* calculate cache size from physmem and vm_map size.
*/
vaddr_t
calc_cache_size(struct vm_map *map, int pct, int va_pct)
{
paddr_t t;
/* XXX should consider competing cache if any */
/* XXX should consider submaps */
t = (uintmax_t)physmem * pct / 100 * PAGE_SIZE;
if (map != NULL) {
vsize_t vsize;
vsize = vm_map_max(map) - vm_map_min(map);
vsize = (uintmax_t)vsize * va_pct / 100;
if (t > vsize) {
t = vsize;
}
}
return t;
}