263 lines
9.0 KiB
Plaintext
263 lines
9.0 KiB
Plaintext
# $NetBSD: GENERIC,v 1.18 2002/09/18 02:44:09 lukem Exp $
|
|
#
|
|
# GENERIC machine description file
|
|
#
|
|
# This machine description file is used to generate the default NetBSD
|
|
# kernel. The generic kernel does not include all options, subsystems
|
|
# and device drivers, but should be useful for most applications.
|
|
#
|
|
# The machine description file can be customised for your specific
|
|
# machine to reduce the kernel size and improve its performance.
|
|
#
|
|
# For further information on compiling NetBSD kernels, see the config(8)
|
|
# man page.
|
|
#
|
|
# For further information on hardware support for this architecture, see
|
|
# the intro(4) man page. For further information about kernel options
|
|
# for this architecture, see the options(4) man page. For an explanation
|
|
# of each device driver in this file see the section 4 man page for the
|
|
# device.
|
|
|
|
# Supports Sun2 (2/120, 2/170, 2/50, ...)
|
|
# Supports root on: ie0, sd*, ...
|
|
|
|
include "arch/sun2/conf/std.sun2"
|
|
|
|
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
|
|
#ident "GENERIC-$Revision: 1.18 $"
|
|
|
|
# Machines to be supported by this kernel
|
|
#options FPU_EMULATE
|
|
|
|
# Needs to be set per system. i.e change these as you see fit
|
|
maxusers 8
|
|
|
|
# Standard system options
|
|
options KTRACE # system call tracing
|
|
options SYSVMSG # System V message queues
|
|
options SYSVSEM # System V semaphores
|
|
#options SEMMNI=10 # number of semaphore identifiers
|
|
#options SEMMNS=60 # number of semaphores in system
|
|
#options SEMUME=10 # max number of undo entries per process
|
|
#options SEMMNU=30 # number of undo structures in system
|
|
options SYSVSHM # System V shared memory
|
|
#options SHMMAXPGS=1024 # 1024 pages is the default
|
|
options LKM # loadable kernel modules
|
|
#options INSECURE # disable kernel security level
|
|
#options UCONSOLE # Allow non-root TIOCCONS
|
|
options USERCONF # userconf(4) support
|
|
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
|
|
# Which kernel debugger? Uncomment either this:
|
|
options DDB
|
|
# ... or these for KGDB (gdb remote target)
|
|
#makeoptions DEBUG="-g" # debugging symbols for gdb
|
|
#options KGDB
|
|
#options KGDB_DEV=0x0C00 # ttya=0C00 ttyb=0C01
|
|
|
|
# Other debugging options
|
|
#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
|
|
#options DEBUG # kernel debugging code
|
|
#options DIAGNOSTIC # extra kernel sanity checking
|
|
#options KMEMSTATS # kernel memory statistics (vmstat -m)
|
|
#options PMAP_DEBUG
|
|
#options SCSIDEBUG
|
|
#options SCSIVERBOSE # Verbose SCSI errors
|
|
|
|
# Compatibility options
|
|
#options COMPAT_SUNOS # can run SunOS 4.1.1 executables
|
|
options COMPAT_43 # and 4.3BSD and ...
|
|
options COMPAT_AOUT_M68K # support for NetBSD a.out executables
|
|
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
|
options EXEC_AOUT # support for a.out executables
|
|
|
|
# Filesystem options
|
|
file-system FFS # Berkeley Fast Filesystem
|
|
file-system NFS # Sun NFS client support
|
|
file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
file-system FDESC # /dev/fd/*
|
|
file-system KERNFS # /kern
|
|
file-system NULLFS # loopback file system
|
|
file-system OVERLAY # overlay file system
|
|
#file-system PROCFS # /proc
|
|
file-system UNION # union file system
|
|
file-system MFS # memory-based filesystem
|
|
|
|
options NFSSERVER # nfs server support
|
|
options QUOTA # FFS quotas
|
|
#options FFS_EI # FFS Endian Independant support
|
|
options SOFTDEP # FFS soft updates support.
|
|
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code to save space
|
|
options VNODE_OP_NOINLINE # Save space by not inlining vnode op calls
|
|
|
|
# Networking options
|
|
options INET # IP prototol stack support
|
|
#options INET6 # IPV6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
#options GATEWAY # IP packet forwarding
|
|
#options ISO,TPIP # OSI networking
|
|
#options EON # OSI tunneling over IP
|
|
#options CCITT,LLC,HDLC # X.25
|
|
options PFIL_HOOKS # pfil(9) packet filter hooks.
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
# Work-around for root on slow servers (insurance...)
|
|
options NFS_BOOT_RWSIZE=1024
|
|
options NFS_BOOT_BOOTPARAM
|
|
|
|
config netbsd root on ? type ?
|
|
|
|
#### Main bus.
|
|
mainbus0 at root
|
|
|
|
#### Bus types.
|
|
|
|
obio0 at mainbus? # all Sun-2
|
|
obmem0 at mainbus? # all Sun-2
|
|
mbmem0 at mainbus? # 2/120, 2/170
|
|
mbio0 at mainbus? # 2/120, 2/170
|
|
sun68kvme0 at mainbus? # 2/50, 2/130, 2/160
|
|
vme0 at sun68kvme0 # mi VME attachment
|
|
|
|
#### Standard system devices.
|
|
|
|
## The AM9513 clock chip.
|
|
clock0 at obio0 addr 0x002800 # 2/120, 2/170
|
|
clock0 at obio0 addr 0x7f2800 # 2/50, 2/130, 2/160
|
|
|
|
## The MM58167 time-of-day chip.
|
|
tod0 at obio0 addr 0x003800 # 2/120, 2/170
|
|
tod0 at vme0 addr 0x200800 # 2/50, 2/130, 2/160
|
|
|
|
#### Serial port configuration.
|
|
|
|
## Zilog 8530 serial chips. Each has two channels.
|
|
## zs0 is ttya and ttyb. zs1 is the keyboard and mouse.
|
|
## zs0 is REQUIRED to use KGDB.
|
|
zs0 at obio0 addr 0x002000 # 2/120, 2/170
|
|
zs0 at obio0 addr 0x7f2000 # 2/50
|
|
zs1 at obmem0 addr 0x780000 # 2/120, 2/170
|
|
zs1 at obio0 addr 0x7f1800 # 2/50
|
|
zs2 at mbmem0 addr 0x080800 # 2/120, 2/170 (first sc SCSI)
|
|
zs3 at mbmem0 addr 0x081000 # 2/120, 2/170 (first sc SCSI)
|
|
zs4 at mbmem0 addr 0x084800 # 2/120, 2/170 (second sc SCSI)
|
|
zs5 at mbmem0 addr 0x085000 # 2/120, 2/170 (second sc SCSI)
|
|
zstty* at zs? channel ? # ttya
|
|
kbd0 at zstty? # keyboard
|
|
ms0 at zstty? # mouse
|
|
|
|
#### Disk controllers and disks.
|
|
|
|
## PAL+logic-based "Sun SCSI 2" Multibus/VME SCSI controller.
|
|
## This driver has several flags which may be enabled using
|
|
## the "flags" directive. Valid flags are:
|
|
##
|
|
## 0x0ff Set (1<<target) to disable parity checking
|
|
## 0x100 Set this bit to disable DMA interrupts (poll)
|
|
## 0x200 Set this bit to disable DMA entirely (use PIO)
|
|
##
|
|
## For example: "flags 0x10f" would disable DMA interrupts,
|
|
## and disable parity for targets 0-3
|
|
|
|
sc0 at mbmem0 addr 0x80000 ipl 2 flags 0xff
|
|
sc0 at vme0 addr 0x200000 irq 2 vect 0x40 flags 0xff
|
|
sc1 at mbmem0 addr 0x84000 ipl 2 flags 0xff
|
|
|
|
## NCR5380-based "Sun SCSI 3" VME SCSI controller.
|
|
## This driver has several flags which may be enabled by OR'ing
|
|
## the values and using the "flags" directive.
|
|
## Valid flags are:
|
|
##
|
|
## 0x01 Use DMA (may be polled)
|
|
## 0x02 Use DMA completion interrupts
|
|
## 0x04 Allow disconnect/reselect
|
|
##
|
|
## E.g. the following would enable DMA, interrupts, and reselect:
|
|
## si0 at vme0 addr 0x200000 ipl 3 vect 0x40 flags 0x07
|
|
##
|
|
## By default, DMA is enabled in the driver.
|
|
|
|
si0 at vme0 addr 0x200000 irq 2 vect 0x40
|
|
|
|
## These entries find devices on all SCSI busses and assign
|
|
## unit numbers dynamically.
|
|
scsibus* at sc?
|
|
scsibus* at si?
|
|
sd* at scsibus? target ? lun ? # SCSI disks
|
|
st* at scsibus? target ? lun ? # SCSI tapes
|
|
cd* at scsibus? target ? lun ? # SCSI CD-ROMs
|
|
#ch* at scsibus? target ? lun ? # SCSI changer devices
|
|
#ss* at scsibus? target ? lun ? # SCSI scanners
|
|
#ses* at scsibus? target ? lun ? # SCSI SES/SAF-TE
|
|
#uk* at scsibus? target ? lun ? # unknown SCSI
|
|
|
|
# support old SCSI devices that don't understand the INQUIRY command
|
|
options SCSI_OLD_NOINQUIRY
|
|
|
|
## Xylogics 450 or 451 Multibus/VME SMD disk controllers and disks.
|
|
#xyc0 at mbio0 addr 0xee40 ipl 2
|
|
xyc0 at vme0 addr 0xee40 irq 2 vect 0x48
|
|
#xyc1 at mbio0 addr 0xee48 ipl 2
|
|
xyc1 at vme0 addr 0xee48 irq 2 vect 0x49
|
|
xy* at xyc? drive ?
|
|
|
|
## Memory-disk device.
|
|
pseudo-device md 2
|
|
|
|
#### Network interfaces.
|
|
|
|
## Intel Ethernet (onboard, or Multibus/VME)
|
|
ie0 at obio0 addr 0x7f0800 ipl 3 # 2/50
|
|
ie0 at mbmem0 addr 0x88000 ipl 3
|
|
ie1 at mbmem0 addr 0x8c000 ipl 3
|
|
## VME: the first [addr,len] pair specifies the device registers;
|
|
## the second pair specifies the on-board memory buffer
|
|
ie1 at vme0 addr 0xe88000,0xe00000 len -1,0x40000 irq 3 vect 0x75
|
|
|
|
## 3Com Ethernet (Multibus only)
|
|
ec0 at mbmem0 addr 0xe0000 ipl 3
|
|
ec1 at mbmem0 addr 0xe2000 ipl 3
|
|
|
|
## Frame buffers.
|
|
|
|
## Sun "bwtwo" black and white framebuffer.
|
|
bwtwo0 at obmem0 addr 0x700000 # 2/120, 2/170
|
|
bwtwo0 at obio0 addr 0x0 # 2/50
|
|
|
|
## PROM console driver -- if all else fails
|
|
pcons0 at mainbus0 # PROM console
|
|
|
|
#### Miscellaneous.
|
|
pseudo-device loop 1 # network loopback
|
|
#pseudo-device bpfilter 8 # packet filter
|
|
#pseudo-device bridge # simple inter-network bridging
|
|
#pseudo-device sl 2 # CSLIP
|
|
#pseudo-device ppp 2 # PPP
|
|
#pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
|
#pseudo-device tun 2 # network tunneling over tty
|
|
#pseudo-device gre 2 # generic L3 over IP tunnel
|
|
#pseudo-device ipfilter # ip filter
|
|
#pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
|
|
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
|
|
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
|
|
# rnd is EXPERIMENTAL
|
|
#pseudo-device rnd # /dev/random and in-kernel generator
|
|
|
|
pseudo-device pty 32 # pseudo-terminals
|
|
#pseudo-device vnd 4 # paging to files
|
|
#pseudo-device ccd 4 # concatenated disks
|
|
#pseudo-device raid 4 # RAIDframe disk driver
|
|
#options RAID_AUTOCONFIG # auto-configuration of RAID components
|
|
# Options to enable various other RAIDframe RAID types.
|
|
# options RF_INCLUDE_EVENODD=1
|
|
# options RF_INCLUDE_RAID5_RS=1
|
|
# options RF_INCLUDE_PARITYLOGGING=1
|
|
# options RF_INCLUDE_CHAINDECLUSTER=1
|
|
# options RF_INCLUDE_INTERDECLUSTER=1
|
|
# options RF_INCLUDE_PARITY_DECLUSTERING=1
|
|
# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
|
|
pseudo-device clockctl # user control of clock subsystem
|