NetBSD/sys/dev/ic/elink3.c

2191 lines
54 KiB
C

/* $NetBSD: elink3.c,v 1.107 2004/08/09 00:25:33 mycroft Exp $ */
/*-
* Copyright (c) 1998, 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1996, 1997 Jonathan Stone <jonathan@NetBSD.org>
* Copyright (c) 1994 Herb Peyerl <hpeyerl@beer.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Herb Peyerl.
* 4. The name of Herb Peyerl may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: elink3.c,v 1.107 2004/08/09 00:25:33 mycroft Exp $");
#include "opt_inet.h"
#include "opt_ns.h"
#include "bpfilter.h"
#include "rnd.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/callout.h>
#include <sys/kernel.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <sys/errno.h>
#include <sys/syslog.h>
#include <sys/select.h>
#include <sys/device.h>
#if NRND > 0
#include <sys/rnd.h>
#endif
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_ether.h>
#include <net/if_media.h>
#if NBPFILTER > 0
#include <net/bpf.h>
#include <net/bpfdesc.h>
#endif
#include <machine/cpu.h>
#include <machine/bus.h>
#include <machine/intr.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <dev/mii/mii_bitbang.h>
#include <dev/ic/elink3var.h>
#include <dev/ic/elink3reg.h>
#ifdef DEBUG
int epdebug = 0;
#endif
/*
* XXX endian workaround for big-endian CPUs with pcmcia:
* if stream methods for bus_space_multi are not provided, define them
* using non-stream bus_space_{read,write}_multi_.
* Assumes host CPU is same endian-ness as bus.
*/
#ifndef __BUS_SPACE_HAS_STREAM_METHODS
#define bus_space_read_multi_stream_2 bus_space_read_multi_2
#define bus_space_read_multi_stream_4 bus_space_read_multi_4
#define bus_space_write_multi_stream_2 bus_space_write_multi_2
#define bus_space_write_multi_stream_4 bus_space_write_multi_4
#endif /* __BUS_SPACE_HAS_STREAM_METHODS */
/*
* Structure to map media-present bits in boards to ifmedia codes and
* printable media names. Used for table-driven ifmedia initialization.
*/
struct ep_media {
int epm_mpbit; /* media present bit */
const char *epm_name; /* name of medium */
int epm_ifmedia; /* ifmedia word for medium */
int epm_epmedia; /* ELINKMEDIA_* constant */
};
/*
* Media table for the Demon/Vortex/Boomerang chipsets.
*
* Note that MII on the Demon and Vortex (3c59x) indicates an external
* MII connector (for connecting an external PHY) ... I think. Treat
* it as `manual' on these chips.
*
* Any Boomerang (3c90x) chips with MII really do have an internal
* MII and real PHYs attached; no `native' media.
*/
const struct ep_media ep_vortex_media[] = {
{ ELINK_PCI_10BASE_T, "10baseT", IFM_ETHER|IFM_10_T,
ELINKMEDIA_10BASE_T },
{ ELINK_PCI_10BASE_T, "10baseT-FDX", IFM_ETHER|IFM_10_T|IFM_FDX,
ELINKMEDIA_10BASE_T },
{ ELINK_PCI_AUI, "10base5", IFM_ETHER|IFM_10_5,
ELINKMEDIA_AUI },
{ ELINK_PCI_BNC, "10base2", IFM_ETHER|IFM_10_2,
ELINKMEDIA_10BASE_2 },
{ ELINK_PCI_100BASE_TX, "100baseTX", IFM_ETHER|IFM_100_TX,
ELINKMEDIA_100BASE_TX },
{ ELINK_PCI_100BASE_TX, "100baseTX-FDX",IFM_ETHER|IFM_100_TX|IFM_FDX,
ELINKMEDIA_100BASE_TX },
{ ELINK_PCI_100BASE_FX, "100baseFX", IFM_ETHER|IFM_100_FX,
ELINKMEDIA_100BASE_FX },
{ ELINK_PCI_100BASE_MII,"manual", IFM_ETHER|IFM_MANUAL,
ELINKMEDIA_MII },
{ ELINK_PCI_100BASE_T4, "100baseT4", IFM_ETHER|IFM_100_T4,
ELINKMEDIA_100BASE_T4 },
{ 0, NULL, 0,
0 },
};
/*
* Media table for the older 3Com Etherlink III chipset, used
* in the 3c509, 3c579, and 3c589.
*/
const struct ep_media ep_509_media[] = {
{ ELINK_W0_CC_UTP, "10baseT", IFM_ETHER|IFM_10_T,
ELINKMEDIA_10BASE_T },
{ ELINK_W0_CC_AUI, "10base5", IFM_ETHER|IFM_10_5,
ELINKMEDIA_AUI },
{ ELINK_W0_CC_BNC, "10base2", IFM_ETHER|IFM_10_2,
ELINKMEDIA_10BASE_2 },
{ 0, NULL, 0,
0 },
};
void ep_internalconfig __P((struct ep_softc *sc));
void ep_vortex_probemedia __P((struct ep_softc *sc));
void ep_509_probemedia __P((struct ep_softc *sc));
static void eptxstat __P((struct ep_softc *));
static int epstatus __P((struct ep_softc *));
int epinit __P((struct ifnet *));
void epstop __P((struct ifnet *, int));
int epioctl __P((struct ifnet *, u_long, caddr_t));
void epstart __P((struct ifnet *));
void epwatchdog __P((struct ifnet *));
void epreset __P((struct ep_softc *));
static void epshutdown __P((void *));
void epread __P((struct ep_softc *));
struct mbuf *epget __P((struct ep_softc *, int));
void epmbuffill __P((void *));
void epmbufempty __P((struct ep_softc *));
void epsetfilter __P((struct ep_softc *));
void ep_roadrunner_mii_enable __P((struct ep_softc *));
void epsetmedia __P((struct ep_softc *));
/* ifmedia callbacks */
int ep_media_change __P((struct ifnet *ifp));
void ep_media_status __P((struct ifnet *ifp, struct ifmediareq *req));
/* MII callbacks */
int ep_mii_readreg __P((struct device *, int, int));
void ep_mii_writereg __P((struct device *, int, int, int));
void ep_statchg __P((struct device *));
void ep_tick __P((void *));
static int epbusyeeprom __P((struct ep_softc *));
u_int16_t ep_read_eeprom __P((struct ep_softc *, u_int16_t));
static inline void ep_reset_cmd __P((struct ep_softc *sc,
u_int cmd, u_int arg));
static inline void ep_finish_reset __P((bus_space_tag_t, bus_space_handle_t));
static inline void ep_discard_rxtop __P((bus_space_tag_t, bus_space_handle_t));
static __inline int ep_w1_reg __P((struct ep_softc *, int));
/*
* MII bit-bang glue.
*/
u_int32_t ep_mii_bitbang_read __P((struct device *));
void ep_mii_bitbang_write __P((struct device *, u_int32_t));
const struct mii_bitbang_ops ep_mii_bitbang_ops = {
ep_mii_bitbang_read,
ep_mii_bitbang_write,
{
PHYSMGMT_DATA, /* MII_BIT_MDO */
PHYSMGMT_DATA, /* MII_BIT_MDI */
PHYSMGMT_CLK, /* MII_BIT_MDC */
PHYSMGMT_DIR, /* MII_BIT_DIR_HOST_PHY */
0, /* MII_BIT_DIR_PHY_HOST */
}
};
/*
* Some chips (3c515 [Corkscrew] and 3c574 [RoadRunner]) have
* Window 1 registers offset!
*/
static __inline int
ep_w1_reg(sc, reg)
struct ep_softc *sc;
int reg;
{
switch (sc->ep_chipset) {
case ELINK_CHIPSET_CORKSCREW:
return (reg + 0x10);
case ELINK_CHIPSET_ROADRUNNER:
switch (reg) {
case ELINK_W1_FREE_TX:
case ELINK_W1_RUNNER_RDCTL:
case ELINK_W1_RUNNER_WRCTL:
return (reg);
}
return (reg + 0x10);
}
return (reg);
}
/*
* Wait for any pending reset to complete.
* On newer hardware we could poll SC_COMMAND_IN_PROGRESS,
* but older hardware doesn't implement it and we must delay.
*/
static inline void
ep_finish_reset(iot, ioh)
bus_space_tag_t iot;
bus_space_handle_t ioh;
{
int i;
for (i = 0; i < 10000; i++) {
if ((bus_space_read_2(iot, ioh, ELINK_STATUS) &
COMMAND_IN_PROGRESS) == 0)
break;
DELAY(10);
}
}
/*
* Issue a (reset) command, and be sure it has completed.
* Used for global reset, TX_RESET, RX_RESET.
*/
static inline void
ep_reset_cmd(sc, cmd, arg)
struct ep_softc *sc;
u_int cmd, arg;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
bus_space_write_2(iot, ioh, cmd, arg);
ep_finish_reset(iot, ioh);
}
static inline void
ep_discard_rxtop(iot, ioh)
bus_space_tag_t iot;
bus_space_handle_t ioh;
{
int i;
bus_space_write_2(iot, ioh, ELINK_COMMAND, RX_DISCARD_TOP_PACK);
/*
* Spin for about 1 msec, to avoid forcing a DELAY() between
* every received packet (adding latency and limiting pkt-recv rate).
* On PCI, at 4 30-nsec PCI bus cycles for a read, 8000 iterations
* is about right.
*/
for (i = 0; i < 8000; i++) {
if ((bus_space_read_2(iot, ioh, ELINK_STATUS) &
COMMAND_IN_PROGRESS) == 0)
return;
}
/* Didn't complete in a hurry. Do DELAY()s. */
ep_finish_reset(iot, ioh);
}
/*
* Back-end attach and configure.
*/
int
epconfig(sc, chipset, enaddr)
struct ep_softc *sc;
u_short chipset;
u_int8_t *enaddr;
{
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
u_int16_t i;
u_int8_t myla[ETHER_ADDR_LEN];
callout_init(&sc->sc_mii_callout);
callout_init(&sc->sc_mbuf_callout);
sc->ep_chipset = chipset;
/*
* We could have been groveling around in other register
* windows in the front-end; make sure we're in window 0
* to read the EEPROM.
*/
GO_WINDOW(0);
if (enaddr == NULL) {
/*
* Read the station address from the eeprom.
*/
for (i = 0; i < ETHER_ADDR_LEN / 2; i++) {
u_int16_t x = ep_read_eeprom(sc, i);
myla[(i << 1)] = x >> 8;
myla[(i << 1) + 1] = x;
}
enaddr = myla;
}
/*
* Vortex-based (3c59x pci,eisa) and Boomerang (3c900) cards
* allow FDDI-sized (4500) byte packets. Commands only take an
* 11-bit parameter, and 11 bits isn't enough to hold a full-size
* packet length.
* Commands to these cards implicitly upshift a packet size
* or threshold by 2 bits.
* To detect cards with large-packet support, we probe by setting
* the transmit threshold register, then change windows and
* read back the threshold register directly, and see if the
* threshold value was shifted or not.
*/
bus_space_write_2(iot, ioh, ELINK_COMMAND,
SET_TX_AVAIL_THRESH | ELINK_LARGEWIN_PROBE);
GO_WINDOW(5);
i = bus_space_read_2(iot, ioh, ELINK_W5_TX_AVAIL_THRESH);
GO_WINDOW(1);
switch (i) {
case ELINK_LARGEWIN_PROBE:
case (ELINK_LARGEWIN_PROBE & ELINK_LARGEWIN_MASK):
sc->ep_pktlenshift = 0;
break;
case (ELINK_LARGEWIN_PROBE << 2):
sc->ep_pktlenshift = 2;
break;
default:
aprint_error(
"%s: wrote 0x%x to TX_AVAIL_THRESH, read back 0x%x. "
"Interface disabled\n",
sc->sc_dev.dv_xname, ELINK_LARGEWIN_PROBE, (int) i);
return (1);
}
/*
* Ensure Tx-available interrupts are enabled for
* start the interface.
* XXX should be in epinit()?
*/
bus_space_write_2(iot, ioh, ELINK_COMMAND,
SET_TX_AVAIL_THRESH | (1600 >> sc->ep_pktlenshift));
strcpy(ifp->if_xname, sc->sc_dev.dv_xname);
ifp->if_softc = sc;
ifp->if_start = epstart;
ifp->if_ioctl = epioctl;
ifp->if_watchdog = epwatchdog;
ifp->if_init = epinit;
ifp->if_stop = epstop;
ifp->if_flags =
IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS | IFF_MULTICAST;
IFQ_SET_READY(&ifp->if_snd);
if_attach(ifp);
ether_ifattach(ifp, enaddr);
/*
* Finish configuration:
* determine chipset if the front-end couldn't do so,
* show board details, set media.
*/
/*
* Print RAM size. We also print the Ethernet address in here.
* It's extracted from the ifp, so we have to make sure it's
* been attached first.
*/
ep_internalconfig(sc);
GO_WINDOW(0);
/*
* Display some additional information, if pertinent.
*/
if (sc->ep_flags & ELINK_FLAGS_USEFIFOBUFFER)
aprint_normal("%s: RoadRunner FIFO buffer enabled\n",
sc->sc_dev.dv_xname);
/*
* Initialize our media structures and MII info. We'll
* probe the MII if we discover that we have one.
*/
sc->sc_mii.mii_ifp = ifp;
sc->sc_mii.mii_readreg = ep_mii_readreg;
sc->sc_mii.mii_writereg = ep_mii_writereg;
sc->sc_mii.mii_statchg = ep_statchg;
ifmedia_init(&sc->sc_mii.mii_media, IFM_IMASK, ep_media_change,
ep_media_status);
/*
* All CORKSCREW chips have MII.
*/
if (sc->ep_chipset == ELINK_CHIPSET_CORKSCREW)
sc->ep_flags |= ELINK_FLAGS_MII;
/*
* Now, determine which media we have.
*/
switch (sc->ep_chipset) {
case ELINK_CHIPSET_ROADRUNNER:
if (sc->ep_flags & ELINK_FLAGS_MII) {
ep_roadrunner_mii_enable(sc);
GO_WINDOW(0);
}
/* FALLTHROUGH */
case ELINK_CHIPSET_CORKSCREW:
case ELINK_CHIPSET_BOOMERANG:
/*
* If the device has MII, probe it. We won't be using
* any `native' media in this case, only PHYs. If
* we don't, just treat the Boomerang like the Vortex.
*/
if (sc->ep_flags & ELINK_FLAGS_MII) {
mii_attach(&sc->sc_dev, &sc->sc_mii, 0xffffffff,
MII_PHY_ANY, MII_OFFSET_ANY, 0);
if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) {
ifmedia_add(&sc->sc_mii.mii_media,
IFM_ETHER|IFM_NONE, 0, NULL);
ifmedia_set(&sc->sc_mii.mii_media,
IFM_ETHER|IFM_NONE);
} else {
ifmedia_set(&sc->sc_mii.mii_media,
IFM_ETHER|IFM_AUTO);
}
break;
}
/* FALLTHROUGH */
case ELINK_CHIPSET_VORTEX:
ep_vortex_probemedia(sc);
break;
default:
ep_509_probemedia(sc);
break;
}
GO_WINDOW(1); /* Window 1 is operating window */
#if NRND > 0
rnd_attach_source(&sc->rnd_source, sc->sc_dev.dv_xname,
RND_TYPE_NET, 0);
#endif
sc->tx_start_thresh = 20; /* probably a good starting point. */
/* Establish callback to reset card when we reboot. */
sc->sd_hook = shutdownhook_establish(epshutdown, sc);
ep_reset_cmd(sc, ELINK_COMMAND, RX_RESET);
ep_reset_cmd(sc, ELINK_COMMAND, TX_RESET);
/* The attach is successful. */
sc->sc_flags |= ELINK_FLAGS_ATTACHED;
return (0);
}
/*
* Show interface-model-independent info from window 3
* internal-configuration register.
*/
void
ep_internalconfig(sc)
struct ep_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
u_int config0;
u_int config1;
int ram_size, ram_width, ram_split;
/*
* NVRAM buffer Rx:Tx config names for busmastering cards
* (Demon, Vortex, and later).
*/
const char *const onboard_ram_config[] = {
"5:3", "3:1", "1:1", "3:5" };
GO_WINDOW(3);
config0 = (u_int)bus_space_read_2(iot, ioh, ELINK_W3_INTERNAL_CONFIG);
config1 = (u_int)bus_space_read_2(iot, ioh,
ELINK_W3_INTERNAL_CONFIG + 2);
GO_WINDOW(0);
ram_size = (config0 & CONFIG_RAMSIZE) >> CONFIG_RAMSIZE_SHIFT;
ram_width = (config0 & CONFIG_RAMWIDTH) >> CONFIG_RAMWIDTH_SHIFT;
ram_split = (config1 & CONFIG_RAMSPLIT) >> CONFIG_RAMSPLIT_SHIFT;
aprint_normal("%s: address %s, %dKB %s-wide FIFO, %s Rx:Tx split\n",
sc->sc_dev.dv_xname,
ether_sprintf(LLADDR(sc->sc_ethercom.ec_if.if_sadl)),
8 << ram_size,
(ram_width) ? "word" : "byte",
onboard_ram_config[ram_split]);
}
/*
* Find supported media on 3c509-generation hardware that doesn't have
* a "reset_options" register in window 3.
* Use the config_cntrl register in window 0 instead.
* Used on original, 10Mbit ISA (3c509), 3c509B, and pre-Demon EISA cards
* that implement CONFIG_CTRL. We don't have a good way to set the
* default active medium; punt to ifconfig instead.
*/
void
ep_509_probemedia(sc)
struct ep_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct ifmedia *ifm = &sc->sc_mii.mii_media;
u_int16_t ep_w0_config, port;
const struct ep_media *epm;
const char *sep = "", *defmedianame = NULL;
int defmedia = 0;
GO_WINDOW(0);
ep_w0_config = bus_space_read_2(iot, ioh, ELINK_W0_CONFIG_CTRL);
aprint_normal("%s: ", sc->sc_dev.dv_xname);
/* Sanity check that there are any media! */
if ((ep_w0_config & ELINK_W0_CC_MEDIAMASK) == 0) {
aprint_error("no media present!\n");
ifmedia_add(ifm, IFM_ETHER|IFM_NONE, 0, NULL);
ifmedia_set(ifm, IFM_ETHER|IFM_NONE);
return;
}
/*
* Get the default media from the EEPROM.
*/
port = ep_read_eeprom(sc, EEPROM_ADDR_CFG) >> 14;
#define PRINT(str) aprint_normal("%s%s", sep, str); sep = ", "
for (epm = ep_509_media; epm->epm_name != NULL; epm++) {
if (ep_w0_config & epm->epm_mpbit) {
/*
* This simple test works because 509 chipsets
* don't do full-duplex.
*/
if (epm->epm_epmedia == port || defmedia == 0) {
defmedia = epm->epm_ifmedia;
defmedianame = epm->epm_name;
}
ifmedia_add(ifm, epm->epm_ifmedia, epm->epm_epmedia,
NULL);
PRINT(epm->epm_name);
}
}
#undef PRINT
#ifdef DIAGNOSTIC
if (defmedia == 0)
panic("ep_509_probemedia: impossible");
#endif
aprint_normal(" (default %s)\n", defmedianame);
ifmedia_set(ifm, defmedia);
}
/*
* Find media present on large-packet-capable elink3 devices.
* Show onboard configuration of large-packet-capable elink3 devices
* (Demon, Vortex, Boomerang), which do not implement CONFIG_CTRL in window 0.
* Use media and card-version info in window 3 instead.
*/
void
ep_vortex_probemedia(sc)
struct ep_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct ifmedia *ifm = &sc->sc_mii.mii_media;
const struct ep_media *epm;
u_int config1;
int reset_options;
int default_media; /* 3-bit encoding of default (EEPROM) media */
int defmedia = 0;
const char *sep = "", *defmedianame = NULL;
GO_WINDOW(3);
config1 = (u_int)bus_space_read_2(iot, ioh,
ELINK_W3_INTERNAL_CONFIG + 2);
reset_options = (int)bus_space_read_2(iot, ioh, ELINK_W3_RESET_OPTIONS);
GO_WINDOW(0);
default_media = (config1 & CONFIG_MEDIAMASK) >> CONFIG_MEDIAMASK_SHIFT;
aprint_normal("%s: ", sc->sc_dev.dv_xname);
/* Sanity check that there are any media! */
if ((reset_options & ELINK_PCI_MEDIAMASK) == 0) {
aprint_error("no media present!\n");
ifmedia_add(ifm, IFM_ETHER|IFM_NONE, 0, NULL);
ifmedia_set(ifm, IFM_ETHER|IFM_NONE);
return;
}
#define PRINT(str) aprint_normal("%s%s", sep, str); sep = ", "
for (epm = ep_vortex_media; epm->epm_name != NULL; epm++) {
if (reset_options & epm->epm_mpbit) {
/*
* Default media is a little more complicated
* on the Vortex. We support full-duplex which
* uses the same reset options bit.
*
* XXX Check EEPROM for default to FDX?
*/
if (epm->epm_epmedia == default_media) {
if ((epm->epm_ifmedia & IFM_FDX) == 0) {
defmedia = epm->epm_ifmedia;
defmedianame = epm->epm_name;
}
} else if (defmedia == 0) {
defmedia = epm->epm_ifmedia;
defmedianame = epm->epm_name;
}
ifmedia_add(ifm, epm->epm_ifmedia, epm->epm_epmedia,
NULL);
PRINT(epm->epm_name);
}
}
#undef PRINT
#ifdef DIAGNOSTIC
if (defmedia == 0)
panic("ep_vortex_probemedia: impossible");
#endif
aprint_normal(" (default %s)\n", defmedianame);
ifmedia_set(ifm, defmedia);
}
/*
* One second timer, used to tick the MII.
*/
void
ep_tick(arg)
void *arg;
{
struct ep_softc *sc = arg;
int s;
#ifdef DIAGNOSTIC
if ((sc->ep_flags & ELINK_FLAGS_MII) == 0)
panic("ep_tick");
#endif
if ((sc->sc_dev.dv_flags & DVF_ACTIVE) == 0)
return;
s = splnet();
mii_tick(&sc->sc_mii);
splx(s);
callout_reset(&sc->sc_mii_callout, hz, ep_tick, sc);
}
/*
* Bring device up.
*
* The order in here seems important. Otherwise we may not receive
* interrupts. ?!
*/
int
epinit(ifp)
struct ifnet *ifp;
{
struct ep_softc *sc = ifp->if_softc;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int i, error;
u_int8_t *addr;
if (!sc->enabled && (error = epenable(sc)) != 0)
return (error);
/* Make sure any pending reset has completed before touching board */
ep_finish_reset(iot, ioh);
/*
* Cancel any pending I/O.
*/
epstop(ifp, 0);
if (sc->bustype != ELINK_BUS_PCI && sc->bustype != ELINK_BUS_EISA
&& sc->bustype != ELINK_BUS_MCA) {
GO_WINDOW(0);
bus_space_write_2(iot, ioh, ELINK_W0_CONFIG_CTRL, 0);
bus_space_write_2(iot, ioh, ELINK_W0_CONFIG_CTRL,
ENABLE_DRQ_IRQ);
}
if (sc->bustype == ELINK_BUS_PCMCIA) {
bus_space_write_2(iot, ioh, ELINK_W0_RESOURCE_CFG, 0x3f00);
}
GO_WINDOW(2);
/* Reload the ether_addr. */
addr = LLADDR(ifp->if_sadl);
for (i = 0; i < 6; i += 2)
bus_space_write_2(iot, ioh, ELINK_W2_ADDR_0 + i,
(addr[i] << 0) | (addr[i + 1] << 8));
/*
* Reset the station-address receive filter.
* A bug workaround for busmastering (Vortex, Demon) cards.
*/
for (i = 0; i < 6; i += 2)
bus_space_write_2(iot, ioh, ELINK_W2_RECVMASK_0 + i, 0);
ep_reset_cmd(sc, ELINK_COMMAND, RX_RESET);
ep_reset_cmd(sc, ELINK_COMMAND, TX_RESET);
GO_WINDOW(1); /* Window 1 is operating window */
for (i = 0; i < 31; i++)
bus_space_read_2(iot, ioh, ep_w1_reg(sc, ELINK_W1_TX_STATUS));
/* Set threshold for Tx-space available interrupt. */
bus_space_write_2(iot, ioh, ELINK_COMMAND,
SET_TX_AVAIL_THRESH | (1600 >> sc->ep_pktlenshift));
if (sc->ep_chipset == ELINK_CHIPSET_ROADRUNNER) {
/*
* Enable options in the PCMCIA LAN COR register, via
* RoadRunner Window 1.
*
* XXX MAGIC CONSTANTS!
*/
u_int16_t cor;
bus_space_write_2(iot, ioh, ELINK_W1_RUNNER_RDCTL, (1 << 11));
cor = bus_space_read_2(iot, ioh, 0) & ~0x30;
if (sc->ep_flags & ELINK_FLAGS_USESHAREDMEM)
cor |= 0x10;
if (sc->ep_flags & ELINK_FLAGS_FORCENOWAIT)
cor |= 0x20;
bus_space_write_2(iot, ioh, 0, cor);
bus_space_write_2(iot, ioh, ELINK_W1_RUNNER_WRCTL, 0);
bus_space_write_2(iot, ioh, ELINK_W1_RUNNER_RDCTL, 0);
if (sc->ep_flags & ELINK_FLAGS_MII) {
ep_roadrunner_mii_enable(sc);
GO_WINDOW(1);
}
}
/* Enable interrupts. */
bus_space_write_2(iot, ioh, ELINK_COMMAND,
SET_RD_0_MASK | WATCHED_INTERRUPTS);
bus_space_write_2(iot, ioh, ELINK_COMMAND,
SET_INTR_MASK | WATCHED_INTERRUPTS);
/*
* Attempt to get rid of any stray interrupts that occurred during
* configuration. On the i386 this isn't possible because one may
* already be queued. However, a single stray interrupt is
* unimportant.
*/
bus_space_write_2(iot, ioh, ELINK_COMMAND, ACK_INTR | 0xff);
epsetfilter(sc);
epsetmedia(sc);
bus_space_write_2(iot, ioh, ELINK_COMMAND, RX_ENABLE);
bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_ENABLE);
epmbuffill(sc);
/* Interface is now `running', with no output active. */
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
if (sc->ep_flags & ELINK_FLAGS_MII) {
/* Start the one second clock. */
callout_reset(&sc->sc_mii_callout, hz, ep_tick, sc);
}
/* Attempt to start output, if any. */
epstart(ifp);
return (0);
}
/*
* Set multicast receive filter.
* elink3 hardware has no selective multicast filter in hardware.
* Enable reception of all multicasts and filter in software.
*/
void
epsetfilter(sc)
struct ep_softc *sc;
{
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
GO_WINDOW(1); /* Window 1 is operating window */
bus_space_write_2(sc->sc_iot, sc->sc_ioh, ELINK_COMMAND,
SET_RX_FILTER | FIL_INDIVIDUAL | FIL_BRDCST |
((ifp->if_flags & IFF_MULTICAST) ? FIL_MULTICAST : 0) |
((ifp->if_flags & IFF_PROMISC) ? FIL_PROMISC : 0));
}
int
ep_media_change(ifp)
struct ifnet *ifp;
{
struct ep_softc *sc = ifp->if_softc;
if (sc->enabled && (ifp->if_flags & IFF_UP) != 0)
epreset(sc);
return (0);
}
/*
* Reset and enable the MII on the RoadRunner.
*/
void
ep_roadrunner_mii_enable(sc)
struct ep_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
GO_WINDOW(3);
bus_space_write_2(iot, ioh, ELINK_W3_RESET_OPTIONS,
ELINK_PCI_100BASE_MII|ELINK_RUNNER_ENABLE_MII);
delay(1000);
bus_space_write_2(iot, ioh, ELINK_W3_RESET_OPTIONS,
ELINK_PCI_100BASE_MII|ELINK_RUNNER_MII_RESET|
ELINK_RUNNER_ENABLE_MII);
ep_reset_cmd(sc, ELINK_COMMAND, TX_RESET);
ep_reset_cmd(sc, ELINK_COMMAND, RX_RESET);
delay(1000);
bus_space_write_2(iot, ioh, ELINK_W3_RESET_OPTIONS,
ELINK_PCI_100BASE_MII|ELINK_RUNNER_ENABLE_MII);
}
/*
* Set the card to use the specified media.
*/
void
epsetmedia(sc)
struct ep_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
/* Turn everything off. First turn off linkbeat and UTP. */
GO_WINDOW(4);
bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE, 0x0);
/* Turn off coax */
bus_space_write_2(iot, ioh, ELINK_COMMAND, STOP_TRANSCEIVER);
delay(1000);
/*
* If the device has MII, select it, and then tell the
* PHY which media to use.
*/
if (sc->ep_flags & ELINK_FLAGS_MII) {
int config0, config1;
GO_WINDOW(3);
if (sc->ep_chipset == ELINK_CHIPSET_ROADRUNNER) {
int resopt;
resopt = bus_space_read_2(iot, ioh,
ELINK_W3_RESET_OPTIONS);
bus_space_write_2(iot, ioh, ELINK_W3_RESET_OPTIONS,
resopt | ELINK_RUNNER_ENABLE_MII);
}
config0 = (u_int)bus_space_read_2(iot, ioh,
ELINK_W3_INTERNAL_CONFIG);
config1 = (u_int)bus_space_read_2(iot, ioh,
ELINK_W3_INTERNAL_CONFIG + 2);
config1 = config1 & ~CONFIG_MEDIAMASK;
config1 |= (ELINKMEDIA_MII << CONFIG_MEDIAMASK_SHIFT);
bus_space_write_2(iot, ioh, ELINK_W3_INTERNAL_CONFIG, config0);
bus_space_write_2(iot, ioh, ELINK_W3_INTERNAL_CONFIG + 2,
config1);
GO_WINDOW(1); /* back to operating window */
mii_mediachg(&sc->sc_mii);
return;
}
/*
* Now turn on the selected media/transceiver.
*/
GO_WINDOW(4);
switch (IFM_SUBTYPE(sc->sc_mii.mii_media.ifm_cur->ifm_media)) {
case IFM_10_T:
bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE,
JABBER_GUARD_ENABLE|LINKBEAT_ENABLE);
break;
case IFM_10_2:
bus_space_write_2(iot, ioh, ELINK_COMMAND, START_TRANSCEIVER);
DELAY(1000); /* 50ms not enmough? */
break;
case IFM_100_TX:
case IFM_100_FX:
case IFM_100_T4: /* XXX check documentation */
bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE,
LINKBEAT_ENABLE);
DELAY(1000); /* not strictly necessary? */
break;
case IFM_10_5:
bus_space_write_2(iot, ioh, ELINK_W4_MEDIA_TYPE,
SQE_ENABLE);
DELAY(1000); /* not strictly necessary? */
break;
case IFM_MANUAL:
/*
* Nothing to do here; we are actually enabling the
* external PHY on the MII port.
*/
break;
case IFM_NONE:
printf("%s: interface disabled\n", sc->sc_dev.dv_xname);
return;
default:
panic("epsetmedia: impossible");
}
/*
* Tell the chip which port to use.
*/
switch (sc->ep_chipset) {
case ELINK_CHIPSET_VORTEX:
case ELINK_CHIPSET_BOOMERANG:
{
int mctl, config0, config1;
GO_WINDOW(3);
config0 = (u_int)bus_space_read_2(iot, ioh,
ELINK_W3_INTERNAL_CONFIG);
config1 = (u_int)bus_space_read_2(iot, ioh,
ELINK_W3_INTERNAL_CONFIG + 2);
config1 = config1 & ~CONFIG_MEDIAMASK;
config1 |= (sc->sc_mii.mii_media.ifm_cur->ifm_data <<
CONFIG_MEDIAMASK_SHIFT);
bus_space_write_2(iot, ioh, ELINK_W3_INTERNAL_CONFIG, config0);
bus_space_write_2(iot, ioh, ELINK_W3_INTERNAL_CONFIG + 2,
config1);
mctl = bus_space_read_2(iot, ioh, ELINK_W3_MAC_CONTROL);
if (sc->sc_mii.mii_media.ifm_cur->ifm_media & IFM_FDX)
mctl |= MAC_CONTROL_FDX;
else
mctl &= ~MAC_CONTROL_FDX;
bus_space_write_2(iot, ioh, ELINK_W3_MAC_CONTROL, mctl);
break;
}
default:
{
int w0_addr_cfg;
GO_WINDOW(0);
w0_addr_cfg = bus_space_read_2(iot, ioh, ELINK_W0_ADDRESS_CFG);
w0_addr_cfg &= 0x3fff;
bus_space_write_2(iot, ioh, ELINK_W0_ADDRESS_CFG, w0_addr_cfg |
(sc->sc_mii.mii_media.ifm_cur->ifm_data << 14));
DELAY(1000);
break;
}
}
GO_WINDOW(1); /* Window 1 is operating window */
}
/*
* Get currently-selected media from card.
* (if_media callback, may be called before interface is brought up).
*/
void
ep_media_status(ifp, req)
struct ifnet *ifp;
struct ifmediareq *req;
{
struct ep_softc *sc = ifp->if_softc;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
if (sc->enabled == 0) {
req->ifm_active = IFM_ETHER|IFM_NONE;
req->ifm_status = 0;
return;
}
/*
* If we have MII, go ask the PHY what's going on.
*/
if (sc->ep_flags & ELINK_FLAGS_MII) {
mii_pollstat(&sc->sc_mii);
req->ifm_active = sc->sc_mii.mii_media_active;
req->ifm_status = sc->sc_mii.mii_media_status;
return;
}
/*
* Ok, at this point we claim that our active media is
* the currently selected media. We'll update our status
* if our chipset allows us to detect link.
*/
req->ifm_active = sc->sc_mii.mii_media.ifm_cur->ifm_media;
req->ifm_status = 0;
switch (sc->ep_chipset) {
case ELINK_CHIPSET_VORTEX:
case ELINK_CHIPSET_BOOMERANG:
GO_WINDOW(4);
req->ifm_status = IFM_AVALID;
if (bus_space_read_2(iot, ioh, ELINK_W4_MEDIA_TYPE) &
LINKBEAT_DETECT)
req->ifm_status |= IFM_ACTIVE;
GO_WINDOW(1); /* back to operating window */
break;
}
}
/*
* Start outputting on the interface.
* Always called as splnet().
*/
void
epstart(ifp)
struct ifnet *ifp;
{
struct ep_softc *sc = ifp->if_softc;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct mbuf *m, *m0;
int sh, len, pad;
bus_size_t txreg;
/* Don't transmit if interface is busy or not running */
if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING)
return;
startagain:
/* Sneak a peek at the next packet */
IFQ_POLL(&ifp->if_snd, m0);
if (m0 == 0)
return;
/* We need to use m->m_pkthdr.len, so require the header */
if ((m0->m_flags & M_PKTHDR) == 0)
panic("epstart: no header mbuf");
len = m0->m_pkthdr.len;
pad = (4 - len) & 3;
/*
* The 3c509 automatically pads short packets to minimum ethernet
* length, but we drop packets that are too large. Perhaps we should
* truncate them instead?
*/
if (len + pad > ETHER_MAX_LEN) {
/* packet is obviously too large: toss it */
++ifp->if_oerrors;
IFQ_DEQUEUE(&ifp->if_snd, m0);
m_freem(m0);
goto readcheck;
}
if (bus_space_read_2(iot, ioh, ep_w1_reg(sc, ELINK_W1_FREE_TX)) <
len + pad + 4) {
bus_space_write_2(iot, ioh, ELINK_COMMAND,
SET_TX_AVAIL_THRESH |
((len + pad + 4) >> sc->ep_pktlenshift));
/* not enough room in FIFO */
ifp->if_flags |= IFF_OACTIVE;
return;
} else {
bus_space_write_2(iot, ioh, ELINK_COMMAND,
SET_TX_AVAIL_THRESH | ELINK_THRESH_DISABLE);
}
IFQ_DEQUEUE(&ifp->if_snd, m0);
if (m0 == 0) /* not really needed */
return;
bus_space_write_2(iot, ioh, ELINK_COMMAND, SET_TX_START_THRESH |
((len / 4 + sc->tx_start_thresh) /* >> sc->ep_pktlenshift*/));
#if NBPFILTER > 0
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, m0);
#endif
/*
* Do the output at a high interrupt priority level so that an
* interrupt from another device won't cause a FIFO underrun.
* We choose splsched() since that blocks essentially everything
* except for interrupts from serial devices (which typically
* lose data if their interrupt isn't serviced fast enough).
*
* XXX THIS CAN CAUSE CLOCK DRIFT!
*/
sh = splsched();
txreg = ep_w1_reg(sc, ELINK_W1_TX_PIO_WR_1);
if (sc->ep_flags & ELINK_FLAGS_USEFIFOBUFFER) {
/*
* Prime the FIFO buffer counter (number of 16-bit
* words about to be written to the FIFO).
*
* NOTE: NO OTHER ACCESS CAN BE PERFORMED WHILE THIS
* COUNTER IS NON-ZERO!
*/
bus_space_write_2(iot, ioh, ELINK_W1_RUNNER_WRCTL,
(len + pad) >> 1);
}
bus_space_write_2(iot, ioh, txreg, len);
bus_space_write_2(iot, ioh, txreg, 0xffff); /* Second is meaningless */
if (ELINK_IS_BUS_32(sc->bustype)) {
for (m = m0; m;) {
if (m->m_len > 3) {
/* align our reads from core */
if (mtod(m, u_long) & 3) {
u_long count =
4 - (mtod(m, u_long) & 3);
bus_space_write_multi_1(iot, ioh,
txreg, mtod(m, u_int8_t *), count);
m->m_data =
(void *)(mtod(m, u_long) + count);
m->m_len -= count;
}
bus_space_write_multi_stream_4(iot, ioh,
txreg, mtod(m, u_int32_t *), m->m_len >> 2);
m->m_data = (void *)(mtod(m, u_long) +
(u_long)(m->m_len & ~3));
m->m_len -= m->m_len & ~3;
}
if (m->m_len) {
bus_space_write_multi_1(iot, ioh,
txreg, mtod(m, u_int8_t *), m->m_len);
}
MFREE(m, m0);
m = m0;
}
} else {
for (m = m0; m;) {
if (m->m_len > 1) {
if (mtod(m, u_long) & 1) {
bus_space_write_1(iot, ioh,
txreg, *(mtod(m, u_int8_t *)));
m->m_data =
(void *)(mtod(m, u_long) + 1);
m->m_len -= 1;
}
bus_space_write_multi_stream_2(iot, ioh,
txreg, mtod(m, u_int16_t *),
m->m_len >> 1);
}
if (m->m_len & 1) {
bus_space_write_1(iot, ioh, txreg,
*(mtod(m, u_int8_t *) + m->m_len - 1));
}
MFREE(m, m0);
m = m0;
}
}
while (pad--)
bus_space_write_1(iot, ioh, txreg, 0);
splx(sh);
++ifp->if_opackets;
readcheck:
if ((bus_space_read_2(iot, ioh, ep_w1_reg(sc, ELINK_W1_RX_STATUS)) &
ERR_INCOMPLETE) == 0) {
/* We received a complete packet. */
u_int16_t status = bus_space_read_2(iot, ioh, ELINK_STATUS);
if ((status & INTR_LATCH) == 0) {
/*
* No interrupt, read the packet and continue
* Is this supposed to happen? Is my motherboard
* completely busted?
*/
epread(sc);
} else {
/* Got an interrupt, return so that it gets serviced. */
return;
}
} else {
/* Check if we are stuck and reset [see XXX comment] */
if (epstatus(sc)) {
if (ifp->if_flags & IFF_DEBUG)
printf("%s: adapter reset\n",
sc->sc_dev.dv_xname);
epreset(sc);
}
}
goto startagain;
}
/*
* XXX: The 3c509 card can get in a mode where both the fifo status bit
* FIFOS_RX_OVERRUN and the status bit ERR_INCOMPLETE are set
* We detect this situation and we reset the adapter.
* It happens at times when there is a lot of broadcast traffic
* on the cable (once in a blue moon).
*/
static int
epstatus(sc)
struct ep_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
u_int16_t fifost;
/*
* Check the FIFO status and act accordingly
*/
GO_WINDOW(4);
fifost = bus_space_read_2(iot, ioh, ELINK_W4_FIFO_DIAG);
GO_WINDOW(1);
if (fifost & FIFOS_RX_UNDERRUN) {
if (sc->sc_ethercom.ec_if.if_flags & IFF_DEBUG)
printf("%s: RX underrun\n", sc->sc_dev.dv_xname);
epreset(sc);
return 0;
}
if (fifost & FIFOS_RX_STATUS_OVERRUN) {
if (sc->sc_ethercom.ec_if.if_flags & IFF_DEBUG)
printf("%s: RX Status overrun\n", sc->sc_dev.dv_xname);
return 1;
}
if (fifost & FIFOS_RX_OVERRUN) {
if (sc->sc_ethercom.ec_if.if_flags & IFF_DEBUG)
printf("%s: RX overrun\n", sc->sc_dev.dv_xname);
return 1;
}
if (fifost & FIFOS_TX_OVERRUN) {
if (sc->sc_ethercom.ec_if.if_flags & IFF_DEBUG)
printf("%s: TX overrun\n", sc->sc_dev.dv_xname);
epreset(sc);
return 0;
}
return 0;
}
static void
eptxstat(sc)
struct ep_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int i;
/*
* We need to read+write TX_STATUS until we get a 0 status
* in order to turn off the interrupt flag.
*/
while ((i = bus_space_read_2(iot, ioh,
ep_w1_reg(sc, ELINK_W1_TX_STATUS))) & TXS_COMPLETE) {
bus_space_write_2(iot, ioh, ep_w1_reg(sc, ELINK_W1_TX_STATUS),
0x0);
if (i & TXS_JABBER) {
++sc->sc_ethercom.ec_if.if_oerrors;
if (sc->sc_ethercom.ec_if.if_flags & IFF_DEBUG)
printf("%s: jabber (%x)\n",
sc->sc_dev.dv_xname, i);
epreset(sc);
} else if (i & TXS_UNDERRUN) {
++sc->sc_ethercom.ec_if.if_oerrors;
if (sc->sc_ethercom.ec_if.if_flags & IFF_DEBUG)
printf("%s: fifo underrun (%x) @%d\n",
sc->sc_dev.dv_xname, i,
sc->tx_start_thresh);
if (sc->tx_succ_ok < 100)
sc->tx_start_thresh = min(ETHER_MAX_LEN,
sc->tx_start_thresh + 20);
sc->tx_succ_ok = 0;
epreset(sc);
} else if (i & TXS_MAX_COLLISION) {
++sc->sc_ethercom.ec_if.if_collisions;
bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_ENABLE);
sc->sc_ethercom.ec_if.if_flags &= ~IFF_OACTIVE;
} else
sc->tx_succ_ok = (sc->tx_succ_ok+1) & 127;
}
}
int
epintr(arg)
void *arg;
{
struct ep_softc *sc = arg;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
u_int16_t status;
int ret = 0;
if (sc->enabled == 0 ||
(sc->sc_dev.dv_flags & DVF_ACTIVE) == 0)
return (0);
for (;;) {
status = bus_space_read_2(iot, ioh, ELINK_STATUS);
if ((status & WATCHED_INTERRUPTS) == 0) {
if ((status & INTR_LATCH) == 0) {
#if 0
printf("%s: intr latch cleared\n",
sc->sc_dev.dv_xname);
#endif
break;
}
}
ret = 1;
/*
* Acknowledge any interrupts. It's important that we do this
* first, since there would otherwise be a race condition.
* Due to the i386 interrupt queueing, we may get spurious
* interrupts occasionally.
*/
bus_space_write_2(iot, ioh, ELINK_COMMAND, ACK_INTR |
(status & (INTR_LATCH | ALL_INTERRUPTS)));
#if 0
status = bus_space_read_2(iot, ioh, ELINK_STATUS);
printf("%s: intr%s%s%s%s\n", sc->sc_dev.dv_xname,
(status & RX_COMPLETE)?" RX_COMPLETE":"",
(status & TX_COMPLETE)?" TX_COMPLETE":"",
(status & TX_AVAIL)?" TX_AVAIL":"",
(status & CARD_FAILURE)?" CARD_FAILURE":"");
#endif
if (status & RX_COMPLETE) {
epread(sc);
}
if (status & TX_AVAIL) {
sc->sc_ethercom.ec_if.if_flags &= ~IFF_OACTIVE;
epstart(&sc->sc_ethercom.ec_if);
}
if (status & CARD_FAILURE) {
printf("%s: adapter failure (%x)\n",
sc->sc_dev.dv_xname, status);
#if 1
epinit(ifp);
#else
epreset(sc);
#endif
return (1);
}
if (status & TX_COMPLETE) {
eptxstat(sc);
epstart(ifp);
}
#if NRND > 0
if (status)
rnd_add_uint32(&sc->rnd_source, status);
#endif
}
/* no more interrupts */
return (ret);
}
void
epread(sc)
struct ep_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
struct mbuf *m;
int len;
len = bus_space_read_2(iot, ioh, ep_w1_reg(sc, ELINK_W1_RX_STATUS));
again:
if (ifp->if_flags & IFF_DEBUG) {
int err = len & ERR_MASK;
char *s = NULL;
if (len & ERR_INCOMPLETE)
s = "incomplete packet";
else if (err == ERR_OVERRUN)
s = "packet overrun";
else if (err == ERR_RUNT)
s = "runt packet";
else if (err == ERR_ALIGNMENT)
s = "bad alignment";
else if (err == ERR_CRC)
s = "bad crc";
else if (err == ERR_OVERSIZE)
s = "oversized packet";
else if (err == ERR_DRIBBLE)
s = "dribble bits";
if (s)
printf("%s: %s\n", sc->sc_dev.dv_xname, s);
}
if (len & ERR_INCOMPLETE)
return;
if (len & ERR_RX) {
++ifp->if_ierrors;
goto abort;
}
len &= RX_BYTES_MASK; /* Lower 11 bits = RX bytes. */
/* Pull packet off interface. */
m = epget(sc, len);
if (m == 0) {
ifp->if_ierrors++;
goto abort;
}
++ifp->if_ipackets;
#if NBPFILTER > 0
/*
* Check if there's a BPF listener on this interface.
* If so, hand off the raw packet to BPF.
*/
if (ifp->if_bpf)
bpf_mtap(ifp->if_bpf, m);
#endif
(*ifp->if_input)(ifp, m);
/*
* In periods of high traffic we can actually receive enough
* packets so that the fifo overrun bit will be set at this point,
* even though we just read a packet. In this case we
* are not going to receive any more interrupts. We check for
* this condition and read again until the fifo is not full.
* We could simplify this test by not using epstatus(), but
* rechecking the RX_STATUS register directly. This test could
* result in unnecessary looping in cases where there is a new
* packet but the fifo is not full, but it will not fix the
* stuck behavior.
*
* Even with this improvement, we still get packet overrun errors
* which are hurting performance. Maybe when I get some more time
* I'll modify epread() so that it can handle RX_EARLY interrupts.
*/
if (epstatus(sc)) {
len = bus_space_read_2(iot, ioh,
ep_w1_reg(sc, ELINK_W1_RX_STATUS));
/* Check if we are stuck and reset [see XXX comment] */
if (len & ERR_INCOMPLETE) {
if (ifp->if_flags & IFF_DEBUG)
printf("%s: adapter reset\n",
sc->sc_dev.dv_xname);
epreset(sc);
return;
}
goto again;
}
return;
abort:
ep_discard_rxtop(iot, ioh);
}
struct mbuf *
epget(sc, totlen)
struct ep_softc *sc;
int totlen;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
struct mbuf *m;
bus_size_t rxreg;
int len, remaining;
int s;
caddr_t newdata;
u_long offset;
m = sc->mb[sc->next_mb];
sc->mb[sc->next_mb] = 0;
if (m == 0) {
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == 0)
return 0;
} else {
/* If the queue is no longer full, refill. */
if (sc->last_mb == sc->next_mb)
callout_reset(&sc->sc_mbuf_callout, 1, epmbuffill, sc);
/* Convert one of our saved mbuf's. */
sc->next_mb = (sc->next_mb + 1) % MAX_MBS;
m->m_data = m->m_pktdat;
m->m_flags = M_PKTHDR;
memset(&m->m_pkthdr, 0, sizeof(m->m_pkthdr));
}
m->m_pkthdr.rcvif = ifp;
m->m_pkthdr.len = totlen;
len = MHLEN;
/*
* Allocate big enough space to hold whole packet, to avoid
* allocating new mbufs on splsched().
*/
if (totlen + ALIGNBYTES > len) {
if (totlen + ALIGNBYTES > MCLBYTES) {
len = ALIGN(totlen + ALIGNBYTES);
MEXTMALLOC(m, len, M_DONTWAIT);
} else {
len = MCLBYTES;
MCLGET(m, M_DONTWAIT);
}
if ((m->m_flags & M_EXT) == 0) {
m_free(m);
return 0;
}
}
/* align the struct ip header */
newdata = (caddr_t) ALIGN(m->m_data + sizeof(struct ether_header))
- sizeof(struct ether_header);
m->m_data = newdata;
m->m_len = totlen;
rxreg = ep_w1_reg(sc, ELINK_W1_RX_PIO_RD_1);
remaining = totlen;
offset = mtod(m, u_long);
/*
* We read the packet at a high interrupt priority level so that
* an interrupt from another device won't cause the card's packet
* buffer to overflow. We choose splsched() since that blocks
* essentially everything except for interrupts from serial
* devices (which typically lose data if their interrupt isn't
* serviced fast enough).
*
* XXX THIS CAN CAUSE CLOCK DRIFT!
*/
s = splsched();
if (sc->ep_flags & ELINK_FLAGS_USEFIFOBUFFER) {
/*
* Prime the FIFO buffer counter (number of 16-bit
* words about to be read from the FIFO).
*
* NOTE: NO OTHER ACCESS CAN BE PERFORMED WHILE THIS
* COUNTER IS NON-ZERO!
*/
bus_space_write_2(iot, ioh, ELINK_W1_RUNNER_RDCTL, totlen >> 1);
}
if (ELINK_IS_BUS_32(sc->bustype)) {
/*
* Read bytes up to the point where we are aligned.
* (We can align to 4 bytes, rather than ALIGNBYTES,
* here because we're later reading 4-byte chunks.)
*/
if ((remaining > 3) && (offset & 3)) {
int count = (4 - (offset & 3));
bus_space_read_multi_1(iot, ioh,
rxreg, (u_int8_t *) offset, count);
offset += count;
remaining -= count;
}
if (remaining > 3) {
bus_space_read_multi_stream_4(iot, ioh,
rxreg, (u_int32_t *) offset,
remaining >> 2);
offset += remaining & ~3;
remaining &= 3;
}
if (remaining) {
bus_space_read_multi_1(iot, ioh,
rxreg, (u_int8_t *) offset, remaining);
}
} else {
if ((remaining > 1) && (offset & 1)) {
bus_space_read_multi_1(iot, ioh,
rxreg, (u_int8_t *) offset, 1);
remaining -= 1;
offset += 1;
}
if (remaining > 1) {
bus_space_read_multi_stream_2(iot, ioh,
rxreg, (u_int16_t *) offset,
remaining >> 1);
offset += remaining & ~1;
}
if (remaining & 1) {
bus_space_read_multi_1(iot, ioh,
rxreg, (u_int8_t *) offset, remaining & 1);
}
}
ep_discard_rxtop(iot, ioh);
if (sc->ep_flags & ELINK_FLAGS_USEFIFOBUFFER)
bus_space_write_2(iot, ioh, ELINK_W1_RUNNER_RDCTL, 0);
splx(s);
return (m);
}
int
epioctl(ifp, cmd, data)
struct ifnet *ifp;
u_long cmd;
caddr_t data;
{
struct ep_softc *sc = ifp->if_softc;
struct ifreq *ifr = (struct ifreq *)data;
int s, error = 0;
s = splnet();
switch (cmd) {
case SIOCSIFMEDIA:
case SIOCGIFMEDIA:
error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd);
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
if (sc->enabled == 0) {
error = EIO;
break;
}
default:
error = ether_ioctl(ifp, cmd, data);
if (error == ENETRESET) {
/*
* Multicast list has changed; set the hardware filter
* accordingly.
*/
epreset(sc);
error = 0;
}
break;
}
splx(s);
return (error);
}
void
epreset(sc)
struct ep_softc *sc;
{
int s;
s = splnet();
epinit(&sc->sc_ethercom.ec_if);
splx(s);
}
void
epwatchdog(ifp)
struct ifnet *ifp;
{
struct ep_softc *sc = ifp->if_softc;
log(LOG_ERR, "%s: device timeout\n", sc->sc_dev.dv_xname);
++sc->sc_ethercom.ec_if.if_oerrors;
epreset(sc);
}
void
epstop(ifp, disable)
struct ifnet *ifp;
int disable;
{
struct ep_softc *sc = ifp->if_softc;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
if (sc->ep_flags & ELINK_FLAGS_MII) {
/* Stop the one second clock. */
callout_stop(&sc->sc_mbuf_callout);
/* Down the MII. */
mii_down(&sc->sc_mii);
}
if (sc->ep_chipset == ELINK_CHIPSET_ROADRUNNER) {
/*
* Clear the FIFO buffer count, thus halting
* any currently-running transactions.
*/
GO_WINDOW(1); /* sanity */
bus_space_write_2(iot, ioh, ELINK_W1_RUNNER_WRCTL, 0);
bus_space_write_2(iot, ioh, ELINK_W1_RUNNER_RDCTL, 0);
}
bus_space_write_2(iot, ioh, ELINK_COMMAND, RX_DISABLE);
ep_discard_rxtop(iot, ioh);
bus_space_write_2(iot, ioh, ELINK_COMMAND, TX_DISABLE);
bus_space_write_2(iot, ioh, ELINK_COMMAND, STOP_TRANSCEIVER);
ep_reset_cmd(sc, ELINK_COMMAND, RX_RESET);
ep_reset_cmd(sc, ELINK_COMMAND, TX_RESET);
bus_space_write_2(iot, ioh, ELINK_COMMAND, ACK_INTR | INTR_LATCH);
bus_space_write_2(iot, ioh, ELINK_COMMAND, SET_RD_0_MASK);
bus_space_write_2(iot, ioh, ELINK_COMMAND, SET_INTR_MASK);
bus_space_write_2(iot, ioh, ELINK_COMMAND, SET_RX_FILTER);
epmbufempty(sc);
if (disable)
epdisable(sc);
ifp->if_flags &= ~IFF_RUNNING;
}
/*
* Before reboots, reset card completely.
*/
static void
epshutdown(arg)
void *arg;
{
struct ep_softc *sc = arg;
int s = splnet();
if (sc->enabled) {
epstop(&sc->sc_ethercom.ec_if, 1);
ep_reset_cmd(sc, ELINK_COMMAND, GLOBAL_RESET);
sc->enabled = 0;
}
splx(s);
}
/*
* We get eeprom data from the id_port given an offset into the
* eeprom. Basically; after the ID_sequence is sent to all of
* the cards; they enter the ID_CMD state where they will accept
* command requests. 0x80-0xbf loads the eeprom data. We then
* read the port 16 times and with every read; the cards check
* for contention (ie: if one card writes a 0 bit and another
* writes a 1 bit then the host sees a 0. At the end of the cycle;
* each card compares the data on the bus; if there is a difference
* then that card goes into ID_WAIT state again). In the meantime;
* one bit of data is returned in the AX register which is conveniently
* returned to us by bus_space_read_2(). Hence; we read 16 times getting one
* bit of data with each read.
*
* NOTE: the caller must provide an i/o handle for ELINK_ID_PORT!
*/
u_int16_t
epreadeeprom(iot, ioh, offset)
bus_space_tag_t iot;
bus_space_handle_t ioh;
int offset;
{
u_int16_t data = 0;
int i;
bus_space_write_2(iot, ioh, 0, 0x80 + offset);
delay(1000);
for (i = 0; i < 16; i++)
data = (data << 1) | (bus_space_read_2(iot, ioh, 0) & 1);
return (data);
}
static int
epbusyeeprom(sc)
struct ep_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
bus_size_t eecmd;
int i = 100, j;
uint16_t busybit;
if (sc->bustype == ELINK_BUS_PCMCIA) {
delay(1000);
return 0;
}
if (sc->ep_chipset == ELINK_CHIPSET_CORKSCREW) {
eecmd = CORK_ASIC_EEPROM_COMMAND;
busybit = CORK_EEPROM_BUSY;
} else {
eecmd = ELINK_W0_EEPROM_COMMAND;
busybit = EEPROM_BUSY;
}
j = 0; /* bad GCC flow analysis */
while (i--) {
j = bus_space_read_2(iot, ioh, eecmd);
if (j & busybit)
delay(100);
else
break;
}
if (i == 0) {
printf("\n%s: eeprom failed to come ready\n",
sc->sc_dev.dv_xname);
return (1);
}
if (sc->ep_chipset != ELINK_CHIPSET_CORKSCREW &&
(j & EEPROM_TST_MODE) != 0) {
/* XXX PnP mode? */
printf("\n%s: erase pencil mark!\n", sc->sc_dev.dv_xname);
return (1);
}
return (0);
}
u_int16_t
ep_read_eeprom(sc, offset)
struct ep_softc *sc;
u_int16_t offset;
{
bus_size_t eecmd, eedata;
u_int16_t readcmd;
if (sc->ep_chipset == ELINK_CHIPSET_CORKSCREW) {
eecmd = CORK_ASIC_EEPROM_COMMAND;
eedata = CORK_ASIC_EEPROM_DATA;
} else {
eecmd = ELINK_W0_EEPROM_COMMAND;
eedata = ELINK_W0_EEPROM_DATA;
}
/*
* RoadRunner has a larger EEPROM, so a different read command
* is required.
*/
if (sc->ep_chipset == ELINK_CHIPSET_ROADRUNNER)
readcmd = READ_EEPROM_RR;
else
readcmd = READ_EEPROM;
if (epbusyeeprom(sc))
return (0); /* XXX why is eeprom busy? */
bus_space_write_2(sc->sc_iot, sc->sc_ioh, eecmd, readcmd | offset);
if (epbusyeeprom(sc))
return (0); /* XXX why is eeprom busy? */
return (bus_space_read_2(sc->sc_iot, sc->sc_ioh, eedata));
}
void
epmbuffill(v)
void *v;
{
struct ep_softc *sc = v;
struct mbuf *m;
int s, i;
s = splnet();
i = sc->last_mb;
do {
if (sc->mb[i] == 0) {
MGET(m, M_DONTWAIT, MT_DATA);
if (m == 0)
break;
sc->mb[i] = m;
}
i = (i + 1) % MAX_MBS;
} while (i != sc->next_mb);
sc->last_mb = i;
/* If the queue was not filled, try again. */
if (sc->last_mb != sc->next_mb)
callout_reset(&sc->sc_mbuf_callout, 1, epmbuffill, sc);
splx(s);
}
void
epmbufempty(sc)
struct ep_softc *sc;
{
int s, i;
s = splnet();
for (i = 0; i<MAX_MBS; i++) {
if (sc->mb[i]) {
m_freem(sc->mb[i]);
sc->mb[i] = NULL;
}
}
sc->last_mb = sc->next_mb = 0;
callout_stop(&sc->sc_mbuf_callout);
splx(s);
}
int
epenable(sc)
struct ep_softc *sc;
{
if (sc->enabled == 0 && sc->enable != NULL) {
if ((*sc->enable)(sc) != 0) {
printf("%s: device enable failed\n",
sc->sc_dev.dv_xname);
return (EIO);
}
}
sc->enabled = 1;
return (0);
}
void
epdisable(sc)
struct ep_softc *sc;
{
if (sc->enabled != 0 && sc->disable != NULL) {
(*sc->disable)(sc);
sc->enabled = 0;
}
}
/*
* ep_activate:
*
* Handle device activation/deactivation requests.
*/
int
ep_activate(self, act)
struct device *self;
enum devact act;
{
struct ep_softc *sc = (struct ep_softc *)self;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
int error = 0, s;
s = splnet();
switch (act) {
case DVACT_ACTIVATE:
error = EOPNOTSUPP;
break;
case DVACT_DEACTIVATE:
if (sc->ep_flags & ELINK_FLAGS_MII)
mii_activate(&sc->sc_mii, act, MII_PHY_ANY,
MII_OFFSET_ANY);
if_deactivate(ifp);
break;
}
splx(s);
return (error);
}
/*
* ep_detach:
*
* Detach a elink3 interface.
*/
int
ep_detach(self, flags)
struct device *self;
int flags;
{
struct ep_softc *sc = (struct ep_softc *)self;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
/* Succeed now if there's no work to do. */
if ((sc->sc_flags & ELINK_FLAGS_ATTACHED) == 0)
return (0);
epdisable(sc);
callout_stop(&sc->sc_mii_callout);
callout_stop(&sc->sc_mbuf_callout);
if (sc->ep_flags & ELINK_FLAGS_MII) {
/* Detach all PHYs */
mii_detach(&sc->sc_mii, MII_PHY_ANY, MII_OFFSET_ANY);
}
/* Delete all remaining media. */
ifmedia_delete_instance(&sc->sc_mii.mii_media, IFM_INST_ANY);
#if NRND > 0
rnd_detach_source(&sc->rnd_source);
#endif
ether_ifdetach(ifp);
if_detach(ifp);
shutdownhook_disestablish(sc->sd_hook);
return (0);
}
u_int32_t
ep_mii_bitbang_read(self)
struct device *self;
{
struct ep_softc *sc = (void *) self;
/* We're already in Window 4. */
return (bus_space_read_2(sc->sc_iot, sc->sc_ioh,
ELINK_W4_BOOM_PHYSMGMT));
}
void
ep_mii_bitbang_write(self, val)
struct device *self;
u_int32_t val;
{
struct ep_softc *sc = (void *) self;
/* We're already in Window 4. */
bus_space_write_2(sc->sc_iot, sc->sc_ioh,
ELINK_W4_BOOM_PHYSMGMT, val);
}
int
ep_mii_readreg(self, phy, reg)
struct device *self;
int phy, reg;
{
struct ep_softc *sc = (void *) self;
int val;
GO_WINDOW(4);
val = mii_bitbang_readreg(self, &ep_mii_bitbang_ops, phy, reg);
GO_WINDOW(1);
return (val);
}
void
ep_mii_writereg(self, phy, reg, val)
struct device *self;
int phy, reg, val;
{
struct ep_softc *sc = (void *) self;
GO_WINDOW(4);
mii_bitbang_writereg(self, &ep_mii_bitbang_ops, phy, reg, val);
GO_WINDOW(1);
}
void
ep_statchg(self)
struct device *self;
{
struct ep_softc *sc = (struct ep_softc *)self;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int mctl;
GO_WINDOW(3);
mctl = bus_space_read_2(iot, ioh, ELINK_W3_MAC_CONTROL);
if (sc->sc_mii.mii_media_active & IFM_FDX)
mctl |= MAC_CONTROL_FDX;
else
mctl &= ~MAC_CONTROL_FDX;
bus_space_write_2(iot, ioh, ELINK_W3_MAC_CONTROL, mctl);
GO_WINDOW(1); /* back to operating window */
}