NetBSD/sys/arch/pica/dev/ascreg.h
1996-07-16 23:23:55 +00:00

323 lines
9.1 KiB
C

/* $NetBSD: ascreg.h,v 1.2 1996/07/16 23:24:10 thorpej Exp $ */
/*-
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Ralph Campbell and Rick Macklem.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)ascreg.h 8.1 (Berkeley) 6/10/93
*/
/*
* Mach Operating System
* Copyright (c) 1991,1990,1989 Carnegie Mellon University
* All Rights Reserved.
*
* Permission to use, copy, modify and distribute this software and its
* documentation is hereby granted, provided that both the copyright
* notice and this permission notice appear in all copies of the
* software, derivative works or modified versions, and any portions
* thereof, and that both notices appear in supporting documentation.
*
* CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS
* CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR
* ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
*
* Carnegie Mellon requests users of this software to return to
*
* Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
* School of Computer Science
* Carnegie Mellon University
* Pittsburgh PA 15213-3890
*
* any improvements or extensions that they make and grant Carnegie the
* rights to redistribute these changes.
*/
/*
* HISTORY
* Log: scsi_53C94.h,v
* Revision 2.4 91/02/05 17:44:59 mrt
* Added author notices
* [91/02/04 11:18:32 mrt]
*
* Changed to use new Mach copyright
* [91/02/02 12:17:11 mrt]
*
* Revision 2.3 90/12/05 23:34:46 af
* Documented max DMA xfer size.
* [90/12/03 23:39:36 af]
*
* Revision 2.1.1.1 90/11/01 03:38:54 af
* Created, from the DEC specs:
* "PMAZ-AA TURBOchannel SCSI Module Functional Specification"
* Workstation Systems Engineering, Palo Alto, CA. Aug 27, 1990.
* And from the NCR data sheets
* "NCR 53C94, 53C95, 53C96 Advanced SCSI Controller"
* [90/09/03 af]
*/
/*
* File: scsi_53C94.h
* Author: Alessandro Forin, Carnegie Mellon University
* Date: 9/90
*
* Defines for the NCR 53C94 ASC (SCSI interface)
* Some gotcha came from the "86C01/53C94 DMA lab work" written
* by Ken Stewart (NCR MED Logic Products Applications Engineer)
* courtesy of NCR. Thanks Ken !
*/
#define ASC_OFFSET_53C94 0x0 /* from module base */
#define ASC_NCMD 7 /* Number of simultaneous cmds */
/*
* Synch xfer parameters, and timing conversions
*/
#define SCSI_MIN_PERIOD 50 /* in 4 nsecs units */
#define ASC_MIN_PERIOD40 8 /* in CLKS/BYTE, 1 CLK = 25nsecs */
#define ASC_MIN_PERIOD25 5 /* in CLKS/BYTE, 1 CLK = 40nsecs */
#define ASC_MIN_PERIOD12 3 /* in CLKS/BYTE, 1 CLK = 80nsecs */
#define ASC_MAX_PERIOD40 56 /* in CLKS/BYTE, 1 CLK = 25nsecs */
#define ASC_MAX_PERIOD25 35 /* in CLKS/BYTE, 1 CLK = 40nsecs */
#define ASC_MAX_PERIOD12 18 /* in CLKS/BYTE, 1 CLK = 80nsecs */
#define ASC_MAX_OFFSET 15 /* pure number */
/*
* Register map, padded as needed
*/
typedef volatile struct {
u_char asc_tc_lsb; /* rw: Transfer Counter LSB */
u_char asc_tc_msb; /* rw: Transfer Counter MSB */
u_char asc_fifo; /* rw: FIFO top */
u_char asc_cmd; /* rw: Command */
u_char asc_status; /* r: Status */
#define asc_dbus_id asc_status /* w: Destination Bus ID */
u_char asc_intr; /* r: Interrupt */
#define asc_sel_timo asc_intr /* w: (re)select timeout */
u_char asc_ss; /* r: Sequence Step */
#define asc_syn_p asc_ss /* w: synchronous period */
u_char asc_flags; /* r: FIFO flags + seq step */
#define asc_syn_o asc_flags /* w: synchronous offset */
u_char asc_cnfg1; /* rw: Configuration 1 */
u_char asc_ccf; /* w: Clock Conv. Factor */
u_char asc_test; /* w: Test Mode */
u_char asc_cnfg2; /* rw: Configuration 2 */
u_char asc_cnfg3; /* rw: Configuration 3 */
u_char asc_res_fifo; /* w: Reserve FIFO byte */
} asc_regmap_t;
/*
* Transfer Count: access macros
* That a NOP is required after loading the dma counter
* I learned on the NCR test code. Sic.
*/
#define ASC_TC_MAX 0x10000
#define ASC_TC_GET(ptr, val) \
val = (ptr)->asc_tc_lsb | ((ptr)->asc_tc_msb << 8)
#define ASC_TC_PUT(ptr, val) \
(ptr)->asc_tc_lsb = (val); \
(ptr)->asc_tc_msb = (val) >> 8; \
(ptr)->asc_cmd = ASC_CMD_NOP | ASC_CMD_DMA;
/*
* Command register (command codes)
*/
#define ASC_CMD_DMA 0x80
/* Miscellaneous */
#define ASC_CMD_NOP 0x00
#define ASC_CMD_FLUSH 0x01
#define ASC_CMD_RESET 0x02
#define ASC_CMD_BUS_RESET 0x03
/* Initiator state */
#define ASC_CMD_XFER_INFO 0x10
#define ASC_CMD_I_COMPLETE 0x11
#define ASC_CMD_MSG_ACPT 0x12
#define ASC_CMD_XFER_PAD 0x18
#define ASC_CMD_SET_ATN 0x1a
#define ASC_CMD_CLR_ATN 0x1b
/* Target state */
#define ASC_CMD_SND_MSG 0x20
#define ASC_CMD_SND_STATUS 0x21
#define ASC_CMD_SND_DATA 0x22
#define ASC_CMD_DISC_SEQ 0x23
#define ASC_CMD_TERM 0x24
#define ASC_CMD_T_COMPLETE 0x25
#define ASC_CMD_DISC 0x27
#define ASC_CMD_RCV_MSG 0x28
#define ASC_CMD_RCV_CDB 0x29
#define ASC_CMD_RCV_DATA 0x2a
#define ASC_CMD_RCV_CMD 0x2b
#define ASC_CMD_ABRT_DMA 0x04
/* Disconnected state */
#define ASC_CMD_RESELECT 0x40
#define ASC_CMD_SEL 0x41
#define ASC_CMD_SEL_ATN 0x42
#define ASC_CMD_SEL_ATN_STOP 0x43
#define ASC_CMD_ENABLE_SEL 0x44
#define ASC_CMD_DISABLE_SEL 0x45
#define ASC_CMD_SEL_ATN3 0x46
/*
* Status register, and phase encoding
*/
#define ASC_CSR_INT 0x80
#define ASC_CSR_GE 0x40
#define ASC_CSR_PE 0x20
#define ASC_CSR_TC 0x10
#define ASC_CSR_VGC 0x08
#define ASC_CSR_MSG 0x04
#define ASC_CSR_CD 0x02
#define ASC_CSR_IO 0x01
#define ASC_PHASE(csr) ((csr) & 0x7)
#define ASC_PHASE_DATAO 0x0
#define ASC_PHASE_DATAI 0x1
#define ASC_PHASE_COMMAND 0x2
#define ASC_PHASE_STATUS 0x3
/* 4..5 ANSI reserved */
#define ASC_PHASE_MSG_OUT 0x6
#define ASC_PHASE_MSG_IN 0x7
/*
* Destination Bus ID
*/
#define ASC_DEST_ID_MASK 0x07
/*
* Interrupt register
*/
#define ASC_INT_RESET 0x80
#define ASC_INT_ILL 0x40
#define ASC_INT_DISC 0x20
#define ASC_INT_BS 0x10
#define ASC_INT_FC 0x08
#define ASC_INT_RESEL 0x04
#define ASC_INT_SEL_ATN 0x02
#define ASC_INT_SEL 0x01
/*
* Timeout register:
*
* val = (timeout * CLK_freq) / (8192 * CCF);
*/
#define ASC_TIMEOUT_250(clk, ccf) (((clk) * 31) / (ccf))
/*
* Sequence Step register
*/
#define ASC_SS_RESERVED 0xf0
#define ASC_SS_SOM 0x08
#define ASC_SS_MASK 0x07
#define ASC_SS(ss) ((ss) & ASC_SS_MASK)
/*
* Synchronous Transfer Period
*/
#define ASC_STP_MASK 0x1f
#define ASC_STP_MIN 0x05 /* 5 clk per byte */
#define ASC_STP_MAX 0x04 /* after ovfl, 35 clk/byte */
/*
* FIFO flags
*/
#define ASC_FLAGS_SEQ_STEP 0xe0
#define ASC_FLAGS_FIFO_CNT 0x1f
/*
* Synchronous offset
*/
#define ASC_SYNO_MASK 0x0f /* 0 -> asyn */
/*
* Configuration 1
*/
#define ASC_CNFG1_SLOW 0x80
#define ASC_CNFG1_SRD 0x40
#define ASC_CNFG1_P_TEST 0x20
#define ASC_CNFG1_P_CHECK 0x10
#define ASC_CNFG1_TEST 0x08
#define ASC_CNFG1_MY_BUS_ID 0x07
/*
* CCF register
*/
#define ASC_CCF(clk) ((((clk) - 1) / 5) + 1)
/*
* Test register
*/
#define ASC_TEST_XXXX 0xf8
#define ASC_TEST_HI_Z 0x04
#define ASC_TEST_I 0x02
#define ASC_TEST_T 0x01
/*
* Configuration 2
*/
#define ASC_CNFG2_RFB 0x80
#define ASC_CNFG2_EPL 0x40
#define ASC_CNFG2_EBC 0x20
#define ASC_CNFG2_DREQ_HIZ 0x10
#define ASC_CNFG2_SCSI2 0x08
#define ASC_CNFG2_BPA 0x04
#define ASC_CNFG2_RPE 0x02
#define ASC_CNFG2_DPE 0x01
/*
* Configuration 3
*/
#define ASC_CNFG3_RESERVED 0xf8
#define ASC_CNFG3_SRB 0x04
#define ASC_CNFG3_ALT_DMA 0x02
#define ASC_CNFG3_T8 0x01
#define ST_MASK 0x3e