NetBSD/sys/arch/atari/dev/fdreg.h

94 lines
3.8 KiB
C

/* $NetBSD: fdreg.h,v 1.1.1.1 1995/03/26 07:12:15 leo Exp $ */
/*
* Copyright (c) 1995 Leo Weppelman.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Leo Weppelman.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _FDREG_H
#define _FDREG_H
/*
* Atari TT hardware:
* Western Digital 1772 Floppy Disk Controller.
*/
/*
* Accessing the FDC registers is indirect through ST-specific
* DMA circuitry. See also dma.h.
*/
#define FDC_CS (FDC ) /* command/status */
#define FDC_TR (FDC| A0) /* track register */
#define FDC_SR (FDC|A1 ) /* sector register */
#define FDC_DR (FDC|A1|A0) /* data register */
/*
* commands (relevant bits/fields indicated)
*/
#define RESTORE 0x00 /* ( HVRR) seek to track 0 */
#define SEEK 0x10 /* ( HVRR) seek to track */
#define STEP 0x20 /* (UHVRR) step in same direction */
#define STEPI 0x40 /* (UHVRR) step in */
#define STEPO 0x60 /* (UHVRR) step out */
#define F_READ 0x80 /* (MHE00) read sector */
#define F_WRITE 0xA0 /* (MHEPA) write sector */
#define READID 0xC0 /* ( HE00) read sector ID */
#define READTR 0xE0 /* ( HE00) read track */
#define WRITETR 0xF0 /* ( HEP0) write track */
#define IRUPT 0xD0 /* ( IIII) force interrupt */
/*
* other bits/fields in command register
*/
#define RATE6 0x00 /* not 2, but 6 msec steprate */
#define RATE12 0x01 /* not 3, but 12 msec steprate */
#define RATE2 0x02 /* not 5, but 2 msec steprate */
#define RATE3 0x03 /* not 6, but 3 msec steprate */
#define VBIT 0x04 /* verify sector ID */
#define HBIT 0x08 /* suppress motor on sequence */
#define UBIT 0x10 /* update track register */
#define EBIT 0x04 /* wait 30 msec to settle */
#define MBIT 0x10 /* multi-sector */
#define PBIT 0x02 /* write precompensate */
#define A0BIT 0x01 /* suppress (?) data address mark */
#define IINDEX 0x04 /* interrupt on each index pulse */
#define IFORCE 0x08 /* force interrupt */
/*
* status register
*/
#define BUSY 0x01 /* set if command under execution */
#define DRQ 0x02 /* Data Register status (pin c1) */
#define LD_T00 0x04 /* lost data; track 00 */
#define CRCERR 0x08 /* CRC error */
#define RNF 0x10 /* Record Not Found */
#define RT_SU 0x20 /* Record Type; Spin Up completed */
#define WRI_PRO 0x40 /* Write Protected */
#define MOTORON 0x80 /* Motor On */
#endif /* _FDREG_H */