391 lines
15 KiB
Plaintext
391 lines
15 KiB
Plaintext
# $NetBSD: GENERIC,v 1.151 2016/12/13 20:42:17 christos Exp $
|
|
#
|
|
# GENERIC machine description file
|
|
#
|
|
# This machine description file is used to generate the default NetBSD
|
|
# kernel. The generic kernel does not include all options, subsystems
|
|
# and device drivers, but should be useful for most applications.
|
|
#
|
|
# The machine description file can be customised for your specific
|
|
# machine to reduce the kernel size and improve its performance.
|
|
#
|
|
# For further information on compiling NetBSD kernels, see the config(8)
|
|
# man page.
|
|
#
|
|
# For further information on hardware support for this architecture, see
|
|
# the intro(4) man page. For further information about kernel options
|
|
# for this architecture, see the options(4) man page. For an explanation
|
|
# of each device driver in this file see the section 4 man page for the
|
|
# device.
|
|
|
|
include "arch/cobalt/conf/std.cobalt"
|
|
|
|
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
|
|
#ident "GENERIC-$Revision: 1.151 $"
|
|
|
|
maxusers 32
|
|
|
|
# Standard system options
|
|
options KTRACE # system call tracing support
|
|
options SYSVMSG # System V message queues
|
|
options SYSVSEM # System V semaphores
|
|
options SYSVSHM # System V shared memory
|
|
options NTP # network time protocol
|
|
options USERCONF # userconf(4) support
|
|
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
|
|
|
|
# Enable experimental buffer queue strategy for better responsiveness under
|
|
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
|
|
#options BUFQ_READPRIO
|
|
#options BUFQ_PRIOCSCAN
|
|
|
|
# Debugging options
|
|
options DIAGNOSTIC # extra kernel sanity checking
|
|
#options DEBUG # extra kernel debugging support
|
|
options DDB # kernel dynamic debugger
|
|
#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
|
|
makeoptions DEBUG="-g" # compile full symbol table
|
|
makeoptions CPUFLAGS="-march=vr5000"
|
|
|
|
# Compatibility options
|
|
options COMPAT_43 # compatibility with 4.3BSD binaries
|
|
#options COMPAT_09 # NetBSD 0.9,
|
|
#options COMPAT_10 # NetBSD 1.0,
|
|
#options COMPAT_11 # NetBSD 1.1,
|
|
#options COMPAT_12 # NetBSD 1.2,
|
|
#options COMPAT_13 # NetBSD 1.3,
|
|
#options COMPAT_14 # NetBSD 1.4,
|
|
#options COMPAT_15 # NetBSD 1.5,
|
|
options COMPAT_16 # NetBSD 1.6,
|
|
options COMPAT_20 # NetBSD 2.0,
|
|
options COMPAT_30 # NetBSD 3.0,
|
|
options COMPAT_40 # NetBSD 4.0,
|
|
options COMPAT_50 # NetBSD 5.0,
|
|
options COMPAT_60 # NetBSD 6.0, and
|
|
options COMPAT_70 # NetBSD 7.0 binary compatibility.
|
|
#options EXEC_ECOFF # exec ECOFF binaries
|
|
#options COMPAT_ULTRIX # binary compatibility with Ultrix
|
|
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
|
options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
|
|
|
|
# File systems
|
|
file-system FFS # Berkeley Fast Filesystem
|
|
file-system EXT2FS # second extended file system (linux)
|
|
file-system NFS # Sun NFS-compatible filesystem client
|
|
file-system KERNFS # kernel data-structure filesystem
|
|
file-system NULLFS # NULL layered filesystem
|
|
#file-system OVERLAY # overlay file system
|
|
file-system MFS # memory-based filesystem
|
|
file-system FDESC # user file descriptor filesystem
|
|
#file-system UMAPFS # uid/gid remapping filesystem
|
|
file-system LFS # Log-based filesystem (still experimental)
|
|
file-system PROCFS # /proc
|
|
file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
file-system UNION # union file system
|
|
file-system MSDOSFS # MS-DOS FAT filesystem(s).
|
|
#file-system CODA # Coda File System; also needs vcoda (below)
|
|
file-system SMBFS # experimental - CIFS; also needs nsmb (below)
|
|
file-system PTYFS # /dev/pts/N support
|
|
file-system TMPFS # Efficient memory file-system
|
|
#file-system UDF # experimental - OSTA UDF CD/DVD file-system
|
|
|
|
# File system options
|
|
options NFSSERVER # Sun NFS-compatible filesystem server
|
|
options QUOTA # legacy UFS quotas
|
|
options QUOTA2 # new, in-filesystem UFS quotas
|
|
#options FFS_EI # FFS Endian Independent support
|
|
options WAPBL # File system journaling support
|
|
#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental
|
|
#options FFS_NO_SNAPSHOT # No FFS snapshot support
|
|
options UFS_EXTATTR # Extended attribute support for UFS1
|
|
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
|
|
# immutable) behave as system flags.
|
|
|
|
# Networking options
|
|
#options GATEWAY # IP packet forwarding
|
|
options INET # Internet protocols
|
|
options INET6 # IPV6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
#options MROUTING # packet forwarding of multicast packets
|
|
#options PIM # Protocol Independent Multicast
|
|
#options NETATALK # AppleTalk (over Ethernet) protocol
|
|
#options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
|
#options PPP_DEFLATE # Deflate compression support for PPP
|
|
#options PPP_FILTER # Active filter support for PPP (requires bpf)
|
|
options IPFILTER_LOG # ipmon(8) log support
|
|
options IPFILTER_LOOKUP # ippool(8) support
|
|
options IPFILTER_COMPAT # Compat for IP-Filter
|
|
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
#options ALTQ # Manipulate network interfaces' output queues
|
|
#options ALTQ_BLUE # Stochastic Fair Blue
|
|
#options ALTQ_CBQ # Class-Based Queueing
|
|
#options ALTQ_CDNR # Diffserv Traffic Conditioner
|
|
#options ALTQ_FIFOQ # First-In First-Out Queue
|
|
#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
|
|
#options ALTQ_HFSC # Hierarchical Fair Service Curve
|
|
#options ALTQ_LOCALQ # Local queueing discipline
|
|
#options ALTQ_PRIQ # Priority Queueing
|
|
#options ALTQ_RED # Random Early Detection
|
|
#options ALTQ_RIO # RED with IN/OUT
|
|
#options ALTQ_WFQ # Weighted Fair Queueing
|
|
|
|
# JIT compiler for bpfilter
|
|
#options SLJIT
|
|
#options BPFJIT
|
|
|
|
# These options enable verbose messages for several subsystems.
|
|
# Warning, these may compile large string tables into the kernel!
|
|
options PCIVERBOSE # verbose PCI device autoconfig messages
|
|
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
|
|
options SCSIVERBOSE # human readable SCSI error messages
|
|
options MIIVERBOSE # verbose PHY autoconfig messages
|
|
|
|
options NFS_BOOT_DHCP
|
|
|
|
config netbsd root on ? type ?
|
|
|
|
mainbus0 at root
|
|
|
|
cpu0 at mainbus?
|
|
|
|
mcclock0 at mainbus? addr 0x10000070
|
|
|
|
com0 at mainbus? addr 0x1c800000 level 3
|
|
options COM_16650
|
|
|
|
zsc0 at mainbus? addr 0x1c800000 irq 4
|
|
zstty0 at zsc0 channel 0
|
|
zstty1 at zsc0 channel 1
|
|
|
|
panel0 at mainbus? addr 0x1f000000
|
|
|
|
gt0 at mainbus? addr 0x14000000
|
|
|
|
pci* at gt0
|
|
pchb* at pci? dev ? function ?
|
|
pcib* at pci? dev ? function ?
|
|
|
|
options PCI_NETBSD_CONFIGURE
|
|
|
|
# Cryptographic Devices
|
|
|
|
# PCI cryptographic devices
|
|
hifn* at pci? dev ? function ? # Hifn 7755/7811/795x
|
|
ubsec* at pci? dev ? function ? # Broadcom 5501/5601/580x/582x
|
|
|
|
# PCI serial/parallel interfaces
|
|
puc* at pci? dev ? function ? # PCI "universal" comm. cards
|
|
com* at puc? port ?
|
|
#lpt* at puc? port ?
|
|
#cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial cards
|
|
|
|
# PCI SCSI controllers
|
|
#adv* at pci? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA]
|
|
#adw* at pci? dev ? function ? # AdvanSys 9xxUW SCSI
|
|
ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI
|
|
#bha* at pci? dev ? function ? # BusLogic 9xx SCSI
|
|
#dpt* at pci? dev ? function ? # DPT SmartCache/SmartRAID
|
|
#isp* at pci? dev ? function ? # Qlogic ISP [12]0x0 SCSI/FC
|
|
siop* at pci? dev ? function ? # NCR 53c8xx SCSI
|
|
esiop* at pci? dev ? function ? # NCR 53c82s75xx SCSI and newer
|
|
#pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI
|
|
|
|
# SCSI bus support
|
|
#scsibus* at adv?
|
|
#scsibus* at adw?
|
|
scsibus* at ahc?
|
|
#scsibus* at bha?
|
|
#scsibus* at dpt?
|
|
#scsibus* at isp?
|
|
scsibus* at siop?
|
|
scsibus* at esiop?
|
|
#scsibus* at pcscp?
|
|
|
|
# SCSI devices
|
|
sd* at scsibus? target ? lun ? # SCSI disk drives
|
|
st* at scsibus? target ? lun ? # SCSI tape drives
|
|
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
|
|
#ch* at scsibus? target ? lun ? # SCSI autochangers
|
|
#ss* at scsibus? target ? lun ? # SCSI scanners
|
|
#uk* at scsibus? target ? lun ? # SCSI unknown
|
|
|
|
# RAID controllers and devices
|
|
#cac* at pci? dev ? function ? # Compaq array controller
|
|
#ca* at cac? unit ? # Compaq array disk device
|
|
|
|
# IDE and related devices
|
|
# PCI IDE controllers - see pciide(4) for supported hardware.
|
|
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
|
|
# how to set up DMA modes for this chip. This may work, or may cause
|
|
# a machine hang with some controllers.
|
|
pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver
|
|
acardide* at pci? dev ? function ? # Acard IDE controllers
|
|
#aceride* at pci? dev ? function ? # Acer Lab IDE controllers
|
|
#artsata* at pci? dev ? function ? # Intel i31244 SATA controller
|
|
cmdide* at pci? dev ? function ? # CMD tech IDE controllers
|
|
#cypide* at pci? dev ? function ? # Cypress IDE controllers
|
|
hptide* at pci? dev ? function ? # Triones/HighPoint IDE controllers
|
|
#optiide* at pci? dev ? function ? # Opti IDE controllers
|
|
pdcide* at pci? dev ? function ? # Promise IDE controllers
|
|
pdcsata* at pci? dev ? function ? # Promise SATA150 controllers
|
|
satalink* at pci? dev ? function ? # SiI SATALink controllers
|
|
#siside* at pci? dev ? function ? # SiS IDE controllers
|
|
#slide* at pci? dev ? function ? # Symphony Labs IDE controllers
|
|
viaide* at pci? dev ? function ? # VIA/AMD/Nvidia IDE controllers
|
|
|
|
# ATA bus
|
|
atabus* at ata?
|
|
|
|
# IDE drives
|
|
# Flags are used only with controllers that support DMA operations
|
|
# and mode settings (e.g. some pciide controllers)
|
|
# The lowest order four bits (rightmost digit) of the flags define the PIO
|
|
# mode to use, the next set of four bits the DMA mode and the third set the
|
|
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
|
|
# to use, and the last bit must be 1 for this setting to be used.
|
|
# For DMA and UDMA, 0xf (1111) means 'disable'.
|
|
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
|
|
# (0xc=1100, 0xa=1010, 0xf=1111)
|
|
# 0x0000 means "use whatever the drive claims to support".
|
|
wd* at atabus? drive ? flags 0x0000
|
|
|
|
# PCI network interfaces
|
|
#en* at pci? dev ? function ? # ENI/Adaptec ATM
|
|
#ep* at pci? dev ? function ? # 3Com 3c59x
|
|
#ex* at pci? dev ? function ? # 3Com 90x[BC]
|
|
#epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet
|
|
#esh* at pci? dev ? function ? # Essential HIPPI card
|
|
#fpa* at pci? dev ? function ? # DEC DEFPA FDDI
|
|
#fxp* at pci? dev ? function ? # Intel EtherExpress PRO10+/100B
|
|
#le* at pci? dev ? function ? # PCnet-PCI Ethernet
|
|
#ne* at pci? dev ? function ? # NE2000-compatible Ethernet
|
|
#ntwoc* at pci? dev ? function ? # Riscom/N2 PCI Sync Serial
|
|
ral* at pci? dev ? function ? # ralink wifi
|
|
#sip* at pci? dev ? function ? # SiS 900 Ethernet
|
|
#tl* at pci? dev ? function ? # ThunderLAN-based Ethernet
|
|
tlp* at pci? dev ? function ? # DECchip 21x4x and clones
|
|
#vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet
|
|
#lmc* at pci? dev ? function ? # Lan Media Corp SSI/HSSI/DS3
|
|
#rtk* at pci? dev ? function ? # Realtek 8129/8139
|
|
|
|
# MII/PHY support
|
|
#exphy* at mii? phy ? # 3Com internal PHYs
|
|
#icsphy* at mii? phy ? # ICS189x PHYs
|
|
#inphy* at mii? phy ? # Intel 82555 PHYs
|
|
#iophy* at mii? phy ? # Intel 82553 PHYs
|
|
lxtphy* at mii? phy ? # Level One LXT-970 PHYs
|
|
#nsphy* at mii? phy ? # NS83840 PHYs
|
|
#nsphyter* at mii? phy ? # NS83843 PHYs
|
|
#qsphy* at mii? phy ? # Quality Semiconductor QS6612
|
|
#sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
|
|
#tlphy* at mii? phy ? # ThunderLAN PHYs
|
|
#tqphy* at mii? phy ? # TDK Semiconductor PHYs
|
|
#ukphy* at mii? phy ? # generic unknown PHYs
|
|
|
|
# PCI IEEE1394 controllers
|
|
#fwohci* at pci? dev ? function ? # IEEE1394 Open Host Controller
|
|
|
|
#ieee1394if* at fwohci?
|
|
#fwip* at ieee1394if? # IP over IEEE1394
|
|
#sbp* at ieee1394if? euihi ? euilo ?
|
|
#scsibus* at sbp?
|
|
|
|
# PCI audio devices
|
|
#clcs* at pci? dev ? function ? # Cirrus Logic CS4280
|
|
#eap* at pci? dev ? function ? # Ensoniq AudioPCI
|
|
#emuxki* at pci? dev ? function ? # SoundBlaster Live!
|
|
#eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive
|
|
#fms* at pci? dev ? function ? # Forte Media FM801
|
|
#sv* at pci? dev ? function ? # S3 SonicVibes
|
|
|
|
# Audio support
|
|
#audio* at audiobus?
|
|
|
|
#spkr* at audio? # PC speaker (synthesized)
|
|
|
|
# Pseudo-devices
|
|
|
|
pseudo-device crypto # /dev/crypto device
|
|
pseudo-device swcrypto # software crypto implementation
|
|
|
|
# Disk/mass storage pseudo-devices
|
|
#pseudo-device ccd # concatenated disk devices
|
|
#pseudo-device cgd # cryptographic disk devices
|
|
pseudo-device raid # RAIDframe disk driver
|
|
options RAID_AUTOCONFIG # auto-configuration of RAID
|
|
# Options to enable various other RAIDframe RAID types.
|
|
# options RF_INCLUDE_EVENODD=1
|
|
# options RF_INCLUDE_RAID5_RS=1
|
|
# options RF_INCLUDE_PARITYLOGGING=1
|
|
# options RF_INCLUDE_CHAINDECLUSTER=1
|
|
# options RF_INCLUDE_INTERDECLUSTER=1
|
|
# options RF_INCLUDE_PARITY_DECLUSTERING=1
|
|
# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
|
|
pseudo-device fss # file system snapshot device
|
|
#pseudo-device md # memory disk device (ramdisk)
|
|
pseudo-device vnd # disk-like interface to files
|
|
#options VND_COMPRESSION # compressed vnd(4)
|
|
|
|
# Network pseudo-devices
|
|
pseudo-device bpfilter # Berkeley packet filter
|
|
#pseudo-device carp # Common Address Redundancy Protocol
|
|
pseudo-device ipfilter # IP filter (firewall) and NAT
|
|
pseudo-device loop # network loopback
|
|
#pseudo-device ppp # Point-to-Point Protocol
|
|
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
|
#pseudo-device sl # Serial Line IP
|
|
#pseudo-device strip # Starmode Radio IP (Metricom)
|
|
#pseudo-device tun # network tunneling over tty
|
|
#pseudo-device tap # virtual Ethernet
|
|
#pseudo-device gre # generic L3 over IP tunnel
|
|
#pseudo-device gif # RFC1933 tunnel
|
|
#pseudo-device faith # IPv[46] tcp relay translation
|
|
#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
|
|
pseudo-device vlan # IEEE 802.1q encapsulation
|
|
pseudo-device bridge # simple inter-network bridging
|
|
#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
|
|
pseudo-device agr # IEEE 802.3ad link aggregation
|
|
|
|
#
|
|
# accept filters
|
|
pseudo-device accf_data # "dataready" accept filter
|
|
pseudo-device accf_http # "httpready" accept filter
|
|
|
|
# Miscellaneous pseudo-devices
|
|
pseudo-device pty # pseudo-terminals
|
|
#pseudo-device sequencer # MIDI sequencer
|
|
#options RND_COM # use "com" randomness (BROKEN)
|
|
pseudo-device clockctl # user control of clock subsystem
|
|
pseudo-device nullcons # no-op console
|
|
|
|
# A pseudo device needed for Coda # also needs CODA (above)
|
|
#pseudo-device vcoda # coda minicache <-> venus comm.
|
|
|
|
# a pseudo device needed for SMBFS
|
|
pseudo-device nsmb # experimental - SMB requester
|
|
|
|
pseudo-device ksyms # /dev/ksyms
|
|
#pseudo-device pf # PF packet filter
|
|
#pseudo-device pflog # PF log if
|
|
|
|
# Veriexec
|
|
#
|
|
# a pseudo device needed for veriexec
|
|
#pseudo-device veriexec
|
|
#
|
|
# Uncomment the fingerprint methods below that are desired. Note that
|
|
# removing fingerprint methods will have almost no impact on the kernel
|
|
# code size.
|
|
#
|
|
#options VERIFIED_EXEC_FP_RMD160
|
|
#options VERIFIED_EXEC_FP_SHA256
|
|
#options VERIFIED_EXEC_FP_SHA384
|
|
#options VERIFIED_EXEC_FP_SHA512
|
|
#options VERIFIED_EXEC_FP_SHA1
|
|
#options VERIFIED_EXEC_FP_MD5
|