1189 lines
31 KiB
Plaintext
1189 lines
31 KiB
Plaintext
# $NetBSD: files.pci,v 1.381 2016/05/01 10:21:02 nonaka Exp $
|
|
#
|
|
# Config file and device description for machine-independent PCI code.
|
|
# Included by ports that need it. Requires that the SCSI files be
|
|
# defined first.
|
|
|
|
defflag opt_pci.h PCIVERBOSE PCI_CONFIG_DUMP PCI_NETBSD_CONFIGURE
|
|
defparam opt_pci.h PCI_NETBSD_ENABLE_IDE
|
|
|
|
defflag opt_bktr.h BKTR_430_FX_MODE BKTR_GPIO_ACCESS BKTR_NO_MSP_RESET
|
|
BKTR_REVERSE_MUTE BKTR_SIS_VIA_MODE BKTR_USE_PLL
|
|
defparam opt_bktr.h BKTR_OVERRIDE_CARD BKTR_OVERRIDE_TUNER BKTR_OVERRIDE_DBX
|
|
BKTR_OVERRIDE_MSP BKTR_SYSTEM_DEFAULT
|
|
|
|
defflag opt_pciide.h PCIIDE_CMD064x_DISABLE PCIIDE_AMD756_ENABLEDMA
|
|
PCIIDE_CMD0646U_ENABLEUDMA PCIIDE_I31244_DISABLEDMA
|
|
|
|
device pci {[dev = -1], [function = -1]}
|
|
attach pci at pcibus
|
|
file dev/pci/pci.c pci needs-flag
|
|
file dev/pci/pci_map.c pci
|
|
file dev/pci/pci_quirks.c pci
|
|
file dev/pci/pci_subr.c pci
|
|
file dev/pci/pci_stub.c pci
|
|
file dev/pci/pci_usrreq.c pci
|
|
file dev/pci/pciconf.c pci & pci_netbsd_configure
|
|
|
|
file dev/pci/pcibusprint.c pcibus
|
|
|
|
file dev/pci/pci_verbose.c pci & pciverbose
|
|
|
|
file dev/pci/wsdisplay_pci.c wsdisplay & pci
|
|
|
|
# Cypress 82c693 hyperCache(tm) Stand-Alone PCI Peripheral Controller
|
|
# with USB. This is a combo chip:
|
|
#
|
|
# PCI-ISA bridge
|
|
# PCI IDE controller
|
|
# OHCI USB controller
|
|
#
|
|
# There are some common subroutines that each function needs.
|
|
define cy82c693
|
|
file dev/pci/cy82c693.c cy82c693
|
|
|
|
# Adaptec 3940, 2940, and aic78[5678]0 SCSI controllers
|
|
# device declaration in sys/conf/files
|
|
attach ahc at pci with ahc_pci: ahc_seeprom, smc93cx6
|
|
file dev/pci/ahc_pci.c ahc_pci
|
|
|
|
attach ahd at pci with ahd_pci
|
|
file dev/pci/ahd_pci.c ahd_pci
|
|
|
|
# I2O adapters
|
|
attach iop at pci with iop_pci
|
|
file dev/pci/iop_pci.c iop_pci
|
|
|
|
# 3ware RAID controllers
|
|
device twe {unit = -1}
|
|
attach twe at pci
|
|
file dev/pci/twe.c twe
|
|
|
|
attach ld at twe with ld_twe
|
|
file dev/pci/ld_twe.c ld_twe
|
|
|
|
device twa {unit = -1}
|
|
attach twa at pci
|
|
file dev/pci/twa.c twa
|
|
|
|
attach ld at twa with ld_twa
|
|
file dev/pci/ld_twa.c ld_twa
|
|
|
|
# AMI RAID controllers
|
|
device amr {unit = -1}
|
|
attach amr at pci
|
|
file dev/pci/amr.c amr
|
|
|
|
attach ld at amr with ld_amr
|
|
file dev/pci/ld_amr.c ld_amr
|
|
|
|
# Areca SATA RAID Controllers
|
|
device arcmsr: scsi, sysmon_envsys
|
|
attach arcmsr at pci
|
|
file dev/pci/arcmsr.c arcmsr
|
|
|
|
# Compaq RAID controllers
|
|
attach cac at pci with cac_pci
|
|
file dev/pci/cac_pci.c cac_pci
|
|
|
|
# Mylex DAC960 RAID controllers
|
|
attach mlx at pci with mlx_pci
|
|
file dev/pci/mlx_pci.c mlx_pci
|
|
|
|
# Newer Mylex AcceleRAID and eXtremeRAID controllers
|
|
device mly: scsi
|
|
attach mly at pci
|
|
file dev/pci/mly.c mly needs-flag
|
|
|
|
# Myson-Century Technology MTD803 3-in-1 Fast Ethernet Controller
|
|
attach mtd at pci with mtd_pci
|
|
file dev/pci/if_mtd_pci.c mtd_pci
|
|
|
|
# ICP-Vortex/Intel RAID controllers
|
|
attach icp at pci with icp_pci
|
|
file dev/pci/icp_pci.c icp_pci
|
|
|
|
# Adaptec FSA RAID controllers
|
|
attach aac at pci with aac_pci
|
|
file dev/pci/aac_pci.c aac_pci
|
|
|
|
# DPT EATA SCSI controllers
|
|
attach dpt at pci with dpt_pci
|
|
file dev/pci/dpt_pci.c dpt_pci
|
|
|
|
# AdvanSys 1200A, 1200B, and ULTRA SCSI controllers
|
|
# device declaration in sys/conf/files
|
|
attach adv at pci with adv_pci
|
|
file dev/pci/adv_pci.c adv_pci
|
|
|
|
# AdvanSys ULTRA WIDE SCSI controllers
|
|
# device declaration in sys/conf/files
|
|
attach adw at pci with adw_pci
|
|
file dev/pci/adw_pci.c adw_pci
|
|
file dev/ic/adwlib.c adw_pci
|
|
file dev/ic/adwmcode.c adw_pci
|
|
|
|
# AMD Am53c974 PCscsi-PCI SCSI controllers
|
|
device pcscp: scsi, ncr53c9x
|
|
attach pcscp at pci
|
|
file dev/pci/pcscp.c pcscp
|
|
|
|
# HP/Compaq Command Interface to Scsi-3
|
|
attach ciss at pci with ciss_pci
|
|
file dev/pci/ciss_pci.c ciss_pci
|
|
|
|
# BusLogic BT-9xx PCI family
|
|
# device declaration in sys/conf/files
|
|
attach bha at pci with bha_pci
|
|
file dev/pci/bha_pci.c bha_pci
|
|
|
|
# Qlogic ISP 10x0 (PCI) family
|
|
# device declaration in sys/conf/files
|
|
attach isp at pci with isp_pci
|
|
file dev/pci/isp_pci.c isp_pci
|
|
|
|
# LSILogic MegaRAID SAS
|
|
# device declaration in sys/conf/files
|
|
attach mfi at pci with mfi_pci
|
|
file dev/pci/mfi_pci.c mfi_pci
|
|
|
|
# LSILogic Fusion-MPT I/O Processor family
|
|
# device declaration in sys/conf/files
|
|
attach mpt at pci with mpt_pci
|
|
file dev/pci/mpt_pci.c mpt_pci
|
|
|
|
# LSI Logic Fusion-MPT Message Passing Interface 2.0
|
|
device mpii: scsi
|
|
attach mpii at pci
|
|
file dev/pci/mpii.c mpii
|
|
|
|
# Ethernet driver for DC21040-based boards
|
|
device de: ether, ifnet, arp
|
|
attach de at pci
|
|
file dev/pci/if_de.c de
|
|
|
|
# Efficient Networks, Inc. ATM interface
|
|
# device declaration in sys/conf/files
|
|
attach en at pci with en_pci
|
|
file dev/pci/if_en_pci.c en_pci
|
|
|
|
# 3Com 3c590 and 3c595 Ethernet controllers
|
|
# device declaration in sys/conf/files
|
|
attach ep at pci with ep_pci
|
|
file dev/pci/if_ep_pci.c ep_pci
|
|
|
|
# 3Com 3c90x[B] Ethernet controllers
|
|
# device declaration in sys/conf/files
|
|
attach ex at pci with ex_pci
|
|
file dev/pci/if_ex_pci.c ex_pci
|
|
|
|
# Digital DEFPA PCI FDDI Controller
|
|
device fpa: pdq, fddi, ifnet, arp
|
|
attach fpa at pci
|
|
file dev/pci/if_fpa.c fpa
|
|
|
|
# AMD am7990 (LANCE) -based Ethernet controllers
|
|
# device declaration in sys/conf/files
|
|
attach le at pci with le_pci: le32
|
|
file dev/pci/if_le_pci.c le_pci
|
|
|
|
# AMD PCnet-PCI Ethernet controller family
|
|
# Supersedes if_le_pci.c
|
|
device pcn: ether, ifnet, arp, mii
|
|
attach pcn at pci
|
|
file dev/pci/if_pcn.c pcn
|
|
|
|
# common code for siop/esiop pci front end
|
|
define siop_pci_common
|
|
file dev/pci/siop_pci_common.c siop_pci_common
|
|
|
|
# Symbios 53c8xx SCSI chips
|
|
# device declaration in sys/conf/files
|
|
attach siop at pci with siop_pci: siop_pci_common
|
|
file dev/pci/siop_pci.c siop_pci
|
|
attach esiop at pci with esiop_pci: siop_pci_common
|
|
file dev/pci/esiop_pci.c esiop_pci
|
|
|
|
# Initio INIC-940/950 SCSI controllers
|
|
attach iha at pci with iha_pci
|
|
file dev/pci/iha_pci.c iha_pci
|
|
|
|
# Tekram DC-395U/UW/F and DC-315/U SCSI controllers
|
|
device trm: scsi
|
|
attach trm at pci
|
|
file dev/pci/trm.c trm
|
|
|
|
# Guillemot Maxi Radio FM 2000 Radio Card
|
|
device gtp: radiodev, tea5757
|
|
attach gtp at pci
|
|
file dev/pci/gtp.c gtp
|
|
|
|
# MediaForte SoundForte SF64-PCR Radio card
|
|
#device sf4r: radiodev, tea5757
|
|
#attach sf4r at pci
|
|
#file dev/pci/sf64pcr.c sf4r
|
|
|
|
# PCI IDE controllers
|
|
define pciide_common
|
|
file dev/pci/pciide_common.c pciide_common
|
|
|
|
device pciide: ata, pciide_common, wdc_common
|
|
attach pciide at pci
|
|
file dev/pci/pciide.c pciide
|
|
|
|
# AHCI SATA controllers
|
|
attach ahcisata at pci with ahcisata_pci
|
|
file dev/pci/ahcisata_pci.c ahcisata_pci
|
|
|
|
# Acard IDE controllers
|
|
device acardide: ata, ata_dma, ata_udma, pciide_common, wdc_common
|
|
attach acardide at pci
|
|
file dev/pci/acardide.c acardide
|
|
|
|
# Acer Lab IDE controllers
|
|
device aceride: ata, ata_dma, ata_udma, pciide_common, wdc_common
|
|
attach aceride at pci
|
|
file dev/pci/aceride.c aceride
|
|
|
|
# Intel i31244 SATA controller
|
|
device artsata: ata, ata_dma, ata_udma, pciide_common, wdc_common, sata
|
|
attach artsata at pci
|
|
file dev/pci/artsata.c artsata
|
|
|
|
# CMD tech IDE controllers
|
|
device cmdide: ata, ata_dma, ata_udma, pciide_common, wdc_common
|
|
attach cmdide at pci
|
|
file dev/pci/cmdide.c cmdide
|
|
|
|
# Cypress IDE controllers
|
|
device cypide: ata, ata_dma, pciide_common, wdc_common, cy82c693
|
|
attach cypide at pci
|
|
file dev/pci/cypide.c cypide
|
|
|
|
# AMD Geode IDE controllers
|
|
device geodeide: ata, ata_dma, ata_udma, pciide_common, wdc_common
|
|
attach geodeide at pci
|
|
file dev/pci/geodeide.c geodeide
|
|
|
|
# Triones/HighPoint IDE controllers
|
|
device hptide: ata, ata_dma, ata_udma, pciide_common, wdc_common
|
|
attach hptide at pci
|
|
file dev/pci/hptide.c hptide
|
|
|
|
# Integrated Technology Express IDE controllers
|
|
device iteide: ata, ata_dma, ata_udma, pciide_common, wdc_common
|
|
attach iteide at pci
|
|
file dev/pci/iteide.c iteide
|
|
|
|
# Jmicron hybrid IDE/AHCI controllers
|
|
define jmide_hl { }
|
|
device jmide: ata, ata_dma, ata_udma, pciide_common, wdc_common, jmide_hl
|
|
attach jmide at pci
|
|
attach ahcisata at jmide_hl with jmahci
|
|
file dev/pci/jmide.c jmide | jmahci needs-flag
|
|
|
|
# National Semiconductor IDE controllers
|
|
device nside: ata, ata_dma, ata_udma, pciide_common, wdc_common
|
|
attach nside at pci
|
|
file dev/pci/nside.c nside
|
|
|
|
# Opti IDE controllers
|
|
device optiide: ata, ata_dma, pciide_common, wdc_common
|
|
attach optiide at pci
|
|
file dev/pci/optiide.c optiide
|
|
|
|
# Intel IDE controllers
|
|
device piixide: ata, ata_dma, ata_udma, pciide_common, wdc_common
|
|
attach piixide at pci
|
|
file dev/pci/piixide.c piixide
|
|
|
|
# Promise Serial ATA controllers
|
|
device pdcsata: ata, ata_dma, ata_udma, pciide_common, wdc_common, sata
|
|
attach pdcsata at pci
|
|
file dev/pci/pdcsata.c pdcsata
|
|
|
|
# Promise IDE controllers
|
|
device pdcide: ata, ata_dma, ata_udma, pciide_common, wdc_common
|
|
attach pdcide at pci
|
|
file dev/pci/pdcide.c pdcide
|
|
|
|
# ServerWorks IDE controllers
|
|
device rccide: ata, ata_dma, ata_udma, pciide_common, wdc_common
|
|
attach rccide at pci
|
|
file dev/pci/rccide.c rccide
|
|
|
|
# RDC IDE controllers
|
|
device rdcide: ata, ata_dma, ata_udma, pciide_common, wdc_common
|
|
attach rdcide at pci
|
|
file dev/pci/rdcide.c rdcide
|
|
|
|
# ServerWorks SATA controllers
|
|
device svwsata: ata, ata_dma, ata_udma, pciide_common, wdc_common, sata
|
|
attach svwsata at pci
|
|
file dev/pci/svwsata.c svwsata
|
|
|
|
# Silicon Image SATALink controllers
|
|
device satalink: ata, ata_dma, ata_udma, pciide_common, wdc_common, sata
|
|
attach satalink at pci
|
|
file dev/pci/satalink.c satalink
|
|
|
|
# Intel SCH IDE controllers
|
|
device schide: ata, ata_dma, ata_udma, pciide_common, wdc_common
|
|
attach schide at pci
|
|
file dev/pci/schide.c schide
|
|
|
|
# SiS IDE controllers
|
|
device siside: ata, ata_dma, ata_udma, pciide_common, wdc_common
|
|
attach siside at pci
|
|
file dev/pci/siside.c siside
|
|
|
|
# Symphony Labs IDE controllers
|
|
device slide: ata, ata_dma, pciide_common, wdc_common
|
|
attach slide at pci
|
|
file dev/pci/slide.c slide
|
|
|
|
# ServerWorks IDE controllers
|
|
#device swide: ata, ata_dma, ata_udma, pciide_common, wdc_common
|
|
#attach swide at pci
|
|
#file dev/pci/swide.c swide
|
|
|
|
# VIA/AMD/Nvidia IDE controllers
|
|
device viaide: ata, ata_dma, ata_udma, pciide_common, wdc_common, sata
|
|
attach viaide at pci
|
|
file dev/pci/viaide.c viaide
|
|
|
|
# STMicroelectronics STPC IDE controllers
|
|
device stpcide: ata, ata_dma, ata_udma, pciide_common, wdc_common
|
|
attach stpcide at pci
|
|
file dev/pci/stpcide.c stpcide
|
|
|
|
# ATI IXP IDE controllers
|
|
device ixpide: ata, ata_dma, ata_udma, pciide_common, wdc_common
|
|
attach ixpide at pci
|
|
file dev/pci/ixpide.c ixpide
|
|
|
|
# Toshiba PICCOLO IDE controllers
|
|
device toshide: ata, ata_dma, pciide_common, wdc_common
|
|
attach toshide at pci
|
|
file dev/pci/toshide.c toshide
|
|
|
|
# PCI-PCI bridge chips
|
|
device ppb: pcibus
|
|
attach ppb at pci
|
|
file dev/pci/ppb.c ppb
|
|
|
|
# Cyclades Cyclom-8/16/32
|
|
attach cy at pci with cy_pci
|
|
file dev/pci/cy_pci.c cy_pci
|
|
|
|
# Cyclades-Z series of intelligent multi-port serial adapters
|
|
device cz
|
|
attach cz at pci
|
|
file dev/pci/cz.c cz needs-flag
|
|
|
|
# Intel EtherExpress PRO 10/100B
|
|
attach fxp at pci with fxp_pci
|
|
file dev/pci/if_fxp_pci.c fxp_pci
|
|
|
|
# Sun HME-network
|
|
attach hme at pci with hme_pci
|
|
file dev/pci/if_hme_pci.c hme_pci
|
|
|
|
# Sun GEM-network
|
|
attach gem at pci with gem_pci
|
|
file dev/pci/if_gem_pci.c gem_pci
|
|
|
|
# Sun Cassini-network
|
|
device cas: arp, ether, ifnet, mii
|
|
attach cas at pci
|
|
file dev/pci/if_cas.c cas
|
|
|
|
# JMicron JMC2[56]0 ethernet controllers
|
|
device jme: ether, ifnet, arp, mii
|
|
attach jme at pci
|
|
file dev/pci/if_jme.c jme
|
|
|
|
# NE2000-compatible PCI Ethernet cards
|
|
defparam opt_ipkdb.h IPKDB_NE_PCISLOT
|
|
defflag opt_ipkdb.h IPKDB_NE_PCI : IPKDB_NE
|
|
attach ne at pci with ne_pci: rtl80x9
|
|
file dev/pci/if_ne_pci.c ne_pci | ipkdb_ne_pci
|
|
|
|
# Texas Instruments ThunderLAN Chip.
|
|
device tl: ether, ifnet, arp, i2cexec, at24cxx_eeprom, i2c_bitbang,
|
|
mii, mii_bitbang
|
|
attach tl at pci
|
|
file dev/pci/if_tl.c tl
|
|
|
|
# SDL Communications N2 PCI Network Interface
|
|
# device declaration in sys/conf/files
|
|
attach ntwoc at pci with ntwoc_pci
|
|
file dev/pci/if_ntwoc_pci.c ntwoc_pci
|
|
|
|
# Lan Media Corporation T1/HSSI/DS3 driver
|
|
device lmc: ifnet, sppp
|
|
attach lmc at pci
|
|
file dev/pci/if_lmc.c lmc
|
|
|
|
# Essential Communications HIPPI interface
|
|
# device declaration in sys/conf/files
|
|
attach esh at pci with esh_pci
|
|
file dev/pci/if_esh_pci.c esh_pci
|
|
|
|
# generic PCI VGA
|
|
defflag opt_vga.h VGA_POST: X86EMU
|
|
attach vga at pci with vga_pci
|
|
file dev/pci/vga_pci.c vga_pci needs-flag
|
|
|
|
# DEC TGA
|
|
device tga: wsemuldisplaydev, rasops8, rasops32
|
|
attach tga at pci
|
|
file dev/pci/tga.c tga needs-flag
|
|
file dev/pci/tga_conf.c tga
|
|
file dev/ic/bt485.c tga
|
|
file dev/ic/bt463.c tga
|
|
file dev/ic/ibm561.c tga
|
|
|
|
# HP Visualize
|
|
attach sti at pci with sti_pci
|
|
file dev/pci/sti_pci.c sti_pci needs-flag
|
|
|
|
# Integraphics Systems IGA168x and CyberPro framebuffers (linear non-VGA mode)
|
|
# device declaration in sys/conf/files
|
|
attach igsfb at pci with igsfb_pci
|
|
file dev/pci/igsfb_pci.c igsfb_pci
|
|
|
|
# Brooktree Bt848 video capture
|
|
device bktr: radiodev
|
|
attach bktr at pci
|
|
file dev/pci/bktr/bktr_audio.c bktr
|
|
file dev/pci/bktr/bktr_card.c bktr
|
|
file dev/pci/bktr/bktr_core.c bktr
|
|
file dev/pci/bktr/bktr_os.c bktr needs-flag
|
|
file dev/pci/bktr/bktr_tuner.c bktr
|
|
|
|
# Cirrus Logic CrystalClear PCI Audio CS4280
|
|
device clcs: audiobus, auconv, mulaw, ac97, midibus
|
|
attach clcs at pci
|
|
file dev/pci/cs4280.c clcs
|
|
|
|
# Cirrus Logic CrystalClear PCI Audio CS4281
|
|
device clct: audiobus, auconv, mulaw, ac97
|
|
attach clct at pci
|
|
file dev/pci/cs4281.c clct
|
|
|
|
# Shared code for Cirrus Logic CrystalClear PCI Audio CS4280 and CS4281
|
|
file dev/pci/cs428x.c clcs | clct
|
|
|
|
# Forte Media FM801
|
|
device fms { }: audiobus, auconv, mulaw, ac97, midibus
|
|
attach fms at pci
|
|
file dev/pci/fms.c fms
|
|
|
|
attach opl at fms with opl_fms
|
|
file dev/pci/opl_fms.c opl_fms
|
|
|
|
attach mpu at fms with mpu_fms
|
|
file dev/pci/mpu_fms.c mpu_fms
|
|
|
|
# Ensoniq AudioPCI S5016
|
|
device eap { }: audiobus, auconv, mulaw, ac97, midibus
|
|
attach eap at pci
|
|
file dev/pci/eap.c eap
|
|
|
|
attach joy at eap with joy_eap
|
|
file dev/pci/joy_eap.c joy_eap needs-flag
|
|
|
|
# Acer Labs M5455
|
|
device auacer: audiobus, auconv, mulaw, ac97, aurateconv
|
|
attach auacer at pci
|
|
file dev/pci/auacer.c auacer
|
|
|
|
# Intel ICH AC'97 audio
|
|
device auich: audiobus, auconv, mulaw, ac97, aurateconv
|
|
attach auich at pci
|
|
file dev/pci/auich.c auich
|
|
|
|
# VIA VT82C686A/VT8233/VT8235 AC'97 Audio
|
|
device auvia: audiobus, auconv, mulaw, ac97, aurateconv
|
|
attach auvia at pci
|
|
file dev/pci/auvia.c auvia
|
|
|
|
# ATI IXP 200/300/400 series AC'97 Audio
|
|
device auixp: audiobus, auconv, mulaw, ac97, aurateconv
|
|
attach auixp at pci
|
|
file dev/pci/auixp.c auixp
|
|
|
|
# High Definition Audio
|
|
device azalia: audiobus, auconv, mulaw, ac97, aurateconv
|
|
attach azalia at pci
|
|
file dev/pci/azalia.c azalia
|
|
file dev/pci/azalia_codec.c azalia
|
|
|
|
# AMD Geode CS5536 Companion Audio
|
|
device gcscaudio: audiobus, auconv, mulaw, ac97, aurateconv
|
|
attach gcscaudio at pci
|
|
file dev/pci/gcscaudio.c gcscaudio
|
|
|
|
# NeoMagic 256 AC'97 Audio
|
|
device neo: audiobus, auconv, mulaw, ac97
|
|
attach neo at pci
|
|
file dev/pci/neo.c neo
|
|
|
|
# ESS Allegro-1 / Maestro3
|
|
device esa: audiobus, auconv, mulaw, ac97
|
|
attach esa at pci
|
|
file dev/pci/esa.c esa
|
|
|
|
# ESS Solo-1 PCI AudioDrive
|
|
device eso { }: audiobus, auconv, mulaw, midibus
|
|
attach eso at pci
|
|
file dev/pci/eso.c eso
|
|
|
|
attach opl at eso with opl_eso
|
|
file dev/pci/opl_eso.c opl_eso
|
|
|
|
attach mpu at eso with mpu_eso
|
|
file dev/pci/mpu_eso.c mpu_eso
|
|
|
|
attach joy at eso with joy_eso
|
|
file dev/pci/joy_eso.c joy_eso
|
|
|
|
# ESS Maestro-1/2/2e PCI AC97 Audio Accelerator
|
|
device esm: audiobus, auconv, mulaw, ac97
|
|
attach esm at pci
|
|
file dev/pci/esm.c esm
|
|
|
|
# S3 SonicVibes (S3 617)
|
|
device sv { }: audiobus, auconv, mulaw, midibus
|
|
attach sv at pci
|
|
file dev/pci/sv.c sv
|
|
|
|
attach opl at sv with opl_sv
|
|
file dev/pci/opl_sv.c opl_sv
|
|
|
|
# C-Media CMI8x38 Audio Chip
|
|
device cmpci { }: audiobus, auconv, mulaw
|
|
attach cmpci at pci
|
|
file dev/pci/cmpci.c cmpci
|
|
|
|
attach opl at cmpci with opl_cmpci
|
|
file dev/pci/opl_cmpci.c opl_cmpci
|
|
|
|
attach mpu at cmpci with mpu_cmpci
|
|
file dev/pci/mpu_cmpci.c mpu_cmpci
|
|
|
|
# Yamaha YMF724/740/744/754 PCI audio controller
|
|
device yds { }: audiobus, auconv, mulaw, ac97
|
|
attach yds at pci
|
|
file dev/pci/yds.c yds
|
|
|
|
attach opl at yds with opl_yds
|
|
file dev/pci/opl_yds.c opl_yds
|
|
|
|
attach mpu at yds with mpu_yds
|
|
file dev/pci/mpu_yds.c mpu_yds
|
|
|
|
# Creative Labs EMU10k1 (SBLive! series and PCI512)
|
|
device emuxki: audiobus, auconv, mulaw, ac97
|
|
attach emuxki at pci
|
|
file dev/pci/emuxki.c emuxki
|
|
|
|
# Trident 4DWAVE AC'97 audio (including SiS 7018,ALi M5451)
|
|
device autri: audiobus, auconv, mulaw, ac97, midibus
|
|
attach autri at pci
|
|
file dev/pci/autri.c autri
|
|
|
|
# SMC EPIC/100 Fast Ethernet on PCI
|
|
attach epic at pci with epic_pci
|
|
file dev/pci/if_epic_pci.c epic_pci
|
|
|
|
# PCI "universal" communication device driver, for PCI com, lpt, etc. ports
|
|
# (see documentation in the driver for what, exactly, should be supported)
|
|
device puc { port = -1 }
|
|
attach puc at pci
|
|
file dev/pci/puc.c puc
|
|
file dev/pci/pucdata.c puc
|
|
defflag opt_puc.h PUC_CNAUTO
|
|
defparam opt_puc.h PUC_CNBUS
|
|
|
|
attach com at puc with com_puc
|
|
file dev/pci/com_puc.c com_puc needs-flag
|
|
file dev/pci/cyber.c com_puc
|
|
file dev/pci/puccn.c com_puc
|
|
|
|
attach lpt at puc with lpt_puc
|
|
file dev/pci/lpt_puc.c lpt_puc & !ppbus
|
|
|
|
attach atppc at puc with atppc_puc
|
|
file dev/pci/atppc_puc.c atppc_puc
|
|
|
|
# UHCI USB controller
|
|
attach uhci at pci with uhci_pci
|
|
file dev/pci/uhci_pci.c uhci_pci
|
|
|
|
# OHCI USB controller
|
|
attach ohci at pci with ohci_pci
|
|
file dev/pci/ohci_pci.c ohci_pci
|
|
|
|
# EHCI USB controller
|
|
attach ehci at pci with ehci_pci
|
|
file dev/pci/ehci_pci.c ehci_pci
|
|
|
|
file dev/pci/usb_pci.c ehci_pci | ehci_cardbus
|
|
|
|
# xHCI USB controller
|
|
attach xhci at pci with xhci_pci
|
|
file dev/pci/xhci_pci.c xhci_pci
|
|
|
|
# OHCI IEEE 1394 controller
|
|
attach fwohci at pci with fwohci_pci
|
|
file dev/pci/fwohci_pci.c fwohci_pci
|
|
|
|
# VIA Rhine/Rhine II Fast Ethernet controllers
|
|
device vr: ether, ifnet, arp, mii, mii_bitbang
|
|
attach vr at pci
|
|
file dev/pci/if_vr.c vr
|
|
|
|
# SiS 900 Fast Ethernet controllers
|
|
device sip: ether, ifnet, arp, mii, mii_bitbang
|
|
attach sip at pci
|
|
file dev/pci/if_sip.c sip | gsip
|
|
|
|
# National Semiconductor DP83820 Gigabit Ethernet
|
|
device gsip: ether, ifnet, arp, mii, mii_bitbang
|
|
attach gsip at pci
|
|
|
|
# Level One LXT-1001 Gigabit Ethernet
|
|
#device glxt: ether, ifnet, arp, mii
|
|
#attach glxt at pci
|
|
#file dev/pci/if_glxt.c glxt
|
|
|
|
# Sundance Tech./Tamarack TC9021 Gigabit Ethernet
|
|
device stge: ether, ifnet, arp, mii, mii_bitbang
|
|
attach stge at pci
|
|
file dev/pci/if_stge.c stge
|
|
|
|
# Intel i82598 & i82599 10-Gigabit Ethernet
|
|
device ixg: ether, ifnet, arp
|
|
attach ixg at pci
|
|
file dev/pci/ixgbe/ixgbe.c ixg
|
|
file dev/pci/ixgbe/ixgbe_netbsd.c ixg
|
|
file dev/pci/ixgbe/ixgbe_82598.c ixg
|
|
file dev/pci/ixgbe/ixgbe_82599.c ixg
|
|
file dev/pci/ixgbe/ixgbe_x540.c ixg
|
|
file dev/pci/ixgbe/ixgbe_api.c ixg
|
|
file dev/pci/ixgbe/ixgbe_common.c ixg
|
|
file dev/pci/ixgbe/ixgbe_mbx.c ixg
|
|
file dev/pci/ixgbe/ixgbe_phy.c ixg
|
|
file dev/pci/ixgbe/ixgbe_vf.c ixg
|
|
|
|
# This appears to be the driver for virtual instances of i82599.
|
|
device ixv: ether, ifnet, arp
|
|
attach ixv at pci
|
|
file dev/pci/ixgbe/ixv.c ixv
|
|
|
|
# Intel i8254x Gigabit Ethernet
|
|
device wm: ether, ifnet, arp, mii, mii_bitbang
|
|
attach wm at pci
|
|
file dev/pci/if_wm.c wm
|
|
|
|
# Broadcom 570x Gigabit Ethernet
|
|
device bge: ether, ifnet, arp, mii, mii_bitbang
|
|
attach bge at pci
|
|
file dev/pci/if_bge.c bge
|
|
|
|
# Broadcom NetXtreme II
|
|
device bnx: ether, ifnet, arp, mii
|
|
attach bnx at pci
|
|
file dev/pci/if_bnx.c bnx
|
|
|
|
# Realtek 8129/8139 Ethernet controllers
|
|
attach rtk at pci with rtk_pci
|
|
file dev/pci/if_rtk_pci.c rtk_pci
|
|
|
|
# DECchip 21x4x Ethernet controller family, and assorted clones.
|
|
attach tlp at pci with tlp_pci
|
|
file dev/pci/if_tlp_pci.c tlp_pci
|
|
|
|
# Bit3 PCI-VME mod. 617
|
|
device btvmei: vmebus
|
|
attach btvmei at pci
|
|
file dev/pci/btvmei.c btvmei
|
|
#file dev/pci/btvmei_dma.c btvmei
|
|
#file dev/pci/btvmei_cntlrdma.c btvmei
|
|
|
|
# Alteon ACEnic Gigabit Ethernet controller
|
|
device ti: ether, ifnet, arp
|
|
attach ti at pci
|
|
file dev/pci/if_ti.c ti
|
|
|
|
# Adaptec AIC-6915 Ethernet interface
|
|
attach sf at pci with sf_pci
|
|
file dev/pci/if_sf_pci.c sf_pci
|
|
|
|
# Sundance Tech. ST-201 10/100 Ethernet
|
|
device ste: ether, ifnet, arp, mii, mii_bitbang
|
|
attach ste at pci
|
|
file dev/pci/if_ste.c ste
|
|
|
|
# YENTA PCI-Cardbus bridge
|
|
#device cbb: cbbus, pcmciabus
|
|
device cbb: pcmciaslot
|
|
attach cbb at pci with cbb_pci
|
|
file dev/pci/pccbb.c cbb
|
|
|
|
# Tundra Universe PCI-VME adapter
|
|
define univ_pci
|
|
file dev/pci/universe_pci.c univ_pci
|
|
|
|
# Bit3 PCI-VME mod. 2706
|
|
device btvmeii: vmebus, univ_pci
|
|
attach btvmeii at pci
|
|
file dev/pci/btvmeii.c btvmeii
|
|
|
|
# VIA VT82C686A/VT8231 PM Timer and Hardware Monitor
|
|
device viaenv: acpipmtimer, sysmon_envsys
|
|
attach viaenv at pci
|
|
file dev/pci/viaenv.c viaenv
|
|
|
|
# Intel PIIX4 power management controller
|
|
device piixpm: i2cbus, acpipmtimer
|
|
attach piixpm at pci
|
|
file dev/pci/piixpm.c piixpm
|
|
|
|
# AMD 768MPX power management controller
|
|
defflag opt_amdpm.h AMDPM_RND_COUNTERS
|
|
device amdpm: i2cbus, acpipmtimer
|
|
attach amdpm at pci
|
|
file dev/pci/amdpm.c amdpm
|
|
file dev/pci/amdpm_smbus.c amdpm
|
|
|
|
# Hi/fn 7751
|
|
device hifn: opencrypto
|
|
attach hifn at pci
|
|
file dev/pci/hifn7751.c hifn
|
|
|
|
# Bluesteelnet 5501/5601, Broadcom 580x/582x security processor
|
|
device ubsec: opencrypto
|
|
attach ubsec at pci
|
|
file dev/pci/ubsec.c ubsec
|
|
|
|
# Aironet PC4500/PC4800
|
|
attach an at pci with an_pci
|
|
file dev/pci/if_an_pci.c an_pci
|
|
|
|
# ADMtek ADM8211 PCI/Mini-PCI
|
|
attach atw at pci with atw_pci
|
|
file dev/pci/if_atw_pci.c atw_pci
|
|
|
|
# Realtek RTL8180 PCI/Mini-PCI
|
|
attach rtw at pci with rtw_pci
|
|
file dev/pci/if_rtw_pci.c rtw_pci
|
|
|
|
# Realtek RTL8188CE Mini-PCIe
|
|
device rtwn: ifnet, arp, wlan, firmload
|
|
attach rtwn at pci
|
|
file dev/pci/if_rtwn.c rtwn
|
|
|
|
# Ralink RT2500/RT2600 PCI/Mini-PCI
|
|
attach ral at pci with ral_pci
|
|
file dev/pci/if_ral_pci.c ral_pci
|
|
|
|
# Marvel Libertas Open
|
|
attach malo at pci with malo_pci
|
|
file dev/pci/if_malo_pci.c malo_pci
|
|
|
|
# Intersil Prism2.5 Mini-PCI
|
|
attach wi at pci with wi_pci
|
|
file dev/pci/if_wi_pci.c wi_pci
|
|
|
|
# ISDN devices
|
|
attach isic at pci with isic_pci
|
|
file dev/pci/isic_pci.c isic_pci
|
|
|
|
file dev/pci/isic_pci_elsa_qs1p.c isic_pci
|
|
|
|
# AVM T1/B1
|
|
attach iavc at pci with iavc_pci
|
|
file dev/pci/iavc_pci.c iavc_pci
|
|
|
|
device ifpci: isdndev, passive_isdn, nisac
|
|
attach ifpci at pci
|
|
file dev/pci/ifpci.c ifpci
|
|
|
|
device ifritz: isdndev, passive_isdn, nisacsx
|
|
attach ifritz at pci
|
|
file dev/pci/ifpci2.c ifritz
|
|
|
|
# Winbond W6692
|
|
device iwic: isdndev, passive_isdn
|
|
attach iwic at pci with iwic_pci
|
|
file dev/pci/iwic_pci.c iwic
|
|
file dev/pci/iwic_bchan.c iwic
|
|
file dev/pci/iwic_dchan.c iwic
|
|
file dev/pci/iwic_fsm.c iwic
|
|
|
|
# IrDA devices
|
|
# Toshiba Fast Infrared Type O IrDA driver
|
|
device oboe: irbus, irdasir
|
|
attach oboe at pci
|
|
file dev/pci/oboe.c oboe
|
|
|
|
# Middle Digital, Inc. PCI-Weasel serial console board control
|
|
# devices (watchdog timer, etc.)
|
|
device weasel: sysmon_wdog
|
|
attach weasel at pci with weasel_pci
|
|
file dev/pci/weasel_pci.c weasel
|
|
|
|
# Game adapter (joystick)
|
|
attach joy at pci with joy_pci
|
|
file dev/pci/joy_pci.c joy_pci
|
|
|
|
# ATI Mach64 framebuffer console driver
|
|
defflag opt_machfb.h MACHFB_DEBUG
|
|
device machfb: wsemuldisplaydev, rasops8, fb, vcons, videomode, edid, drm, glyphcache
|
|
attach machfb at pci
|
|
file dev/pci/machfb.c machfb
|
|
|
|
# 3Dfx Voodoo3 framebuffer console driver
|
|
device voodoofb: wsemuldisplaydev, rasops8, vcons, videomode, drm, i2cbus, i2c_bitbang, ddc_read_edid, edid
|
|
attach voodoofb at pci
|
|
file dev/pci/voodoofb.c voodoofb
|
|
|
|
# VIA UniChrome framebuffer console driver
|
|
device unichromefb: wsemuldisplaydev, rasops16, rasops32, vcons, drm
|
|
attach unichromefb at pci
|
|
file dev/pci/unichromefb.c unichromefb needs-flag
|
|
|
|
# ATI Radeon framebuffer console driver
|
|
# (Note: to enable the BIOS parser, add options RADEON_BIOS_INIT to the config)
|
|
device radeonfb: wsemuldisplaydev, videomode, rasops8, rasops32, vcons, splash, i2cbus, i2c_bitbang, ddc_read_edid, edid, drm, glyphcache
|
|
attach radeonfb at pci
|
|
file dev/pci/radeonfb.c radeonfb
|
|
file dev/pci/radeonfb_i2c.c radeonfb
|
|
file dev/pci/radeonfb_bios.c radeonfb
|
|
defflag opt_radeonfb.h RADEONFB_DEBUG
|
|
defflag opt_radeonfb.h RADEONFB_BIOS_INIT
|
|
defflag opt_radeonfb.h RADEONFB_BIOS_DEBUG
|
|
defflag opt_radeonfb.h RADEONFB_MMAP_BARS
|
|
defflag opt_radeonfb.h RADEONFB_DEPTH_32
|
|
defflag opt_radeonfb.h RADEONFB_ALWAYS_ACCEL_PUTCHAR
|
|
|
|
# Chelsio Terminator 3 (T3) 10 gigabit ethernet
|
|
device cxgbc { }
|
|
attach cxgbc at pci
|
|
device cxgb: ether, ifnet, arp
|
|
attach cxgb at cxgbc
|
|
file dev/pci/cxgb/cxgb_main.c cxgbc | cxgb
|
|
file dev/pci/cxgb/cxgb_mc5.c cxgbc | cxgb
|
|
file dev/pci/cxgb/cxgb_vsc8211.c cxgbc | cxgb
|
|
file dev/pci/cxgb/cxgb_ael1002.c cxgbc | cxgb
|
|
file dev/pci/cxgb/cxgb_mv88e1xxx.c cxgbc | cxgb
|
|
file dev/pci/cxgb/cxgb_vsc7323.c cxgbc | cxgb
|
|
file dev/pci/cxgb/cxgb_xgmac.c cxgbc | cxgb
|
|
file dev/pci/cxgb/cxgb_t3_hw.c cxgbc | cxgb
|
|
file dev/pci/cxgb/cxgb_sge.c cxgbc | cxgb
|
|
file dev/pci/cxgb/cxgb_lro.c cxgbc | cxgb
|
|
# file dev/pci/cxgb/cxgb_offload.c cxgbc | cxgb
|
|
file dev/pci/cxgb/cxgb_l2t.c cxgbc | cxgb
|
|
file dev/pci/cxgb/cxgb_osdep.c cxgbc | cxgb
|
|
|
|
# Chips & Technologies 65550 framebuffer console driver
|
|
attach chipsfb at pci with chipsfb_pci
|
|
file dev/pci/chipsfb.c chipsfb_pci
|
|
|
|
# 3Com 3c990
|
|
device txp: ether, ifnet, arp
|
|
attach txp at pci
|
|
file dev/pci/if_txp.c txp
|
|
|
|
# SysKonnect
|
|
device skc { }
|
|
attach skc at pci
|
|
device sk: ether, ifnet, arp, mii
|
|
attach sk at skc
|
|
file dev/pci/if_sk.c skc | sk
|
|
|
|
# Broadcom 4401 10/100 Ethernet
|
|
device bce: ether, ifnet, arp, mii
|
|
attach bce at pci
|
|
file dev/pci/if_bce.c bce
|
|
|
|
# Intel PRO/10GbE
|
|
device dge: ether, ifnet, arp
|
|
attach dge at pci
|
|
file dev/pci/if_dge.c dge
|
|
|
|
# Realtek 8169 Ethernet controllers
|
|
attach re at pci with re_pci
|
|
file dev/pci/if_re_pci.c re_pci
|
|
|
|
# Windows NDIS drivers (Experimental)
|
|
device ndis
|
|
attach ndis at pci
|
|
file dev/if_ndis/if_ndis.c ndis
|
|
file dev/if_ndis/if_ndis_pci.c ndis
|
|
|
|
# Intel PRO/Wireless 2100
|
|
device ipw: ifnet, arp, wlan, firmload
|
|
attach ipw at pci
|
|
file dev/pci/if_ipw.c ipw
|
|
|
|
# Intel PRO/Wireless 2200BG/2915ABG
|
|
device iwi: ifnet, arp, wlan, firmload
|
|
attach iwi at pci
|
|
file dev/pci/if_iwi.c iwi
|
|
|
|
# Intel PRO/Wireless 3945ABG
|
|
device wpi: ifnet, arp, wlan, firmload
|
|
attach wpi at pci
|
|
file dev/pci/if_wpi.c wpi
|
|
|
|
# Intel PRO/Wireless 4965AGN Mini-PCI Adapter
|
|
device iwn: ifnet, arp, wlan, firmload
|
|
attach iwn at pci
|
|
file dev/pci/if_iwn.c iwn
|
|
|
|
# Intel Centrino 7260
|
|
device iwm: ifnet, arp, wlan, firmload
|
|
attach iwm at pci
|
|
file dev/pci/if_iwm.c iwm
|
|
|
|
# Workbit NinjaSCSI-32 controllers
|
|
# device declaration in sys/conf/files
|
|
attach njs at pci with njs_pci
|
|
file dev/pci/njs_pci.c njs_pci
|
|
|
|
# S2io Xframe 10 Gigabit ethernet (Xframe driver)
|
|
device xge: ether, ifnet, arp
|
|
attach xge at pci
|
|
file dev/pci/if_xge.c xge
|
|
|
|
# Via Velocity 612x 10/100/1000 Ethernet
|
|
device vge: ether, ifnet, arp, mii
|
|
attach vge at pci
|
|
file dev/pci/if_vge.c vge
|
|
|
|
# Atheros 5210/5211/5212 PCI/Mini-PCI
|
|
attach ath at pci with ath_pci
|
|
file dev/pci/if_ath_pci.c ath_pci
|
|
|
|
# Atheros AR9k (802.11 a/g/n)
|
|
attach athn at pci with athn_pci
|
|
file dev/pci/if_athn_pci.c athn_pci
|
|
|
|
# NVIDIA nForce Ethernet
|
|
device nfe: ether, ifnet, arp, mii, mii_phy
|
|
attach nfe at pci
|
|
file dev/pci/if_nfe.c nfe
|
|
|
|
# MICREL Etherent
|
|
device kse: ether, ifnet, arp
|
|
attach kse at pci
|
|
file dev/pci/if_kse.c kse
|
|
|
|
# Yukon 2
|
|
device mskc { }
|
|
attach mskc at pci
|
|
device msk: ether, ifnet, arp, mii
|
|
attach msk at mskc
|
|
file dev/pci/if_msk.c mskc | msk
|
|
|
|
# SD Host Controller
|
|
attach sdhc at pci with sdhc_pci
|
|
file dev/pci/sdhc_pci.c sdhc_pci
|
|
|
|
# generic framebuffer console driver, PCI frontend
|
|
attach genfb at pci with genfb_pci : splash
|
|
file dev/pci/genfb_pci.c genfb_pci
|
|
|
|
# NVIDIA nForce2/3/4 SMBus controller
|
|
device nfsmbc { }
|
|
attach nfsmbc at pci
|
|
device nfsmb: i2cbus
|
|
attach nfsmb at nfsmbc
|
|
file dev/pci/nfsmb.c nfsmbc | nfsmb
|
|
|
|
# Intel ICH SMBus controller
|
|
device ichsmb: i2cbus
|
|
attach ichsmb at pci
|
|
file dev/pci/ichsmb.c ichsmb
|
|
|
|
# ATI Rage 128 framebuffer console driver
|
|
device r128fb: wsemuldisplaydev, rasops8, rasops32, vcons, videomode, i2cbus, i2c_bitbang, glyphcache
|
|
attach r128fb at pci
|
|
file dev/pci/r128fb.c r128fb
|
|
defflag opt_r128fb.h R128FB_DEBUG
|
|
defflag opt_r128fb.h R128FB_WAIT
|
|
|
|
# Attansic/Atheros L1 Gigabit-Ethernet
|
|
device age: ether, ifnet, arp, mii, mii_phy
|
|
attach age at pci
|
|
file dev/pci/if_age.c age
|
|
|
|
# Attansic/Atheros L1C/L2C Gigabit Ethernet
|
|
device alc: ether, ifnet, arp, mii, mii_phy
|
|
attach alc at pci
|
|
file dev/pci/if_alc.c alc
|
|
|
|
# Attanisc/Atheros L1E Gigabit Ethernet
|
|
device ale: ether, ifnet, arp, mii, mii_phy
|
|
attach ale at pci
|
|
file dev/pci/if_ale.c ale
|
|
|
|
# Atheros/Attansic L2 Fast-Ethernet
|
|
device lii: ether, ifnet, arp, mii
|
|
attach lii at pci
|
|
file dev/pci/if_lii.c lii
|
|
|
|
# Silicon Image SteelVine SATA-II controllers
|
|
attach siisata at pci with siisata_pci
|
|
file dev/pci/siisata_pci.c siisata_pci
|
|
|
|
# Acer Labs M7101 power management controller
|
|
device alipm: i2cbus
|
|
attach alipm at pci
|
|
file dev/pci/alipm.c alipm
|
|
|
|
#
|
|
# NetOctave NSP2000
|
|
#
|
|
include "dev/pci/n8/files.n8"
|
|
|
|
#
|
|
# Broadcom AirForce / Apple Airport Extreme
|
|
#
|
|
attach bwi at pci with bwi_pci
|
|
file dev/pci/if_bwi_pci.c bwi_pci
|
|
|
|
# Marvell Serial-ATA Host Controller
|
|
attach mvsata at pci with mvsata_pci
|
|
file dev/pci/mvsata_pci.c mvsata_pci
|
|
|
|
include "dev/pci/voyager/files.voyager"
|
|
# Silicon Motion SM502 / Voyager GX
|
|
device voyager: i2c_bitbang, voyagerbus, i2cbus
|
|
attach voyager at pci
|
|
file dev/pci/voyager.c voyager
|
|
defflag opt_voyager.h VOYAGER_DEBUG
|
|
|
|
# High Definition Audio
|
|
attach hdaudio at pci with hdaudio_pci
|
|
file dev/pci/hdaudio_pci.c hdaudio_pci
|
|
|
|
# Permedia 2 / Sun PGX32 / Raptor
|
|
device pm2fb: wsemuldisplaydev, rasops8, rasops32, vcons, videomode, i2cbus, i2c_bitbang, ddc_read_edid, edid, glyphcache
|
|
attach pm2fb at pci
|
|
file dev/pci/pm2fb.c pm2fb
|
|
defflag opt_pm2fb.h PM2FB_DEBUG
|
|
|
|
# 3Dlabs Wildcat / Sun XVR-500, 1200, Expert3D etc.
|
|
device wcfb: wsemuldisplaydev, rasops8, vcons
|
|
attach wcfb at pci
|
|
file dev/pci/wcfb.c wcfb
|
|
defflag opt_wcfb.h WCFB_DEBUG
|
|
|
|
# Domex 536, 5380-compatible SCSI HBA
|
|
attach nca at pci with nca_pci
|
|
file dev/pci/nca_pci.c nca_pci
|
|
|
|
# Agere ET1310/1301 Ethernet
|
|
device et: ether, ifnet, arp, mii, mii_phy
|
|
attach et at pci
|
|
file dev/pci/if_et.c et
|
|
|
|
# RDC Semiconductor R6040 10/100 Ethernet
|
|
device vte: ether, ifnet, arp, mii, mii_phy
|
|
attach vte at pci
|
|
file dev/pci/if_vte.c vte
|
|
|
|
# Conexant CX23880-series DTV interface
|
|
device cxdtv: dtvbus, i2c_bitbang, i2cbus, i2cexec, tvpll, nxt2k, lg3303
|
|
attach cxdtv at pci
|
|
file dev/pci/cxdtv.c cxdtv
|
|
file dev/pci/cxdtv_boards.c cxdtv
|
|
|
|
# Conexant CX23885-series DTV interface
|
|
device coram: dtvbus, i2cbus, i2cexec, mt2131, cx24227
|
|
attach coram at pci
|
|
file dev/pci/coram.c coram
|
|
|
|
# QUANCOM Electronic GmbH PWDOG1
|
|
device pwdog: sysmon_envsys
|
|
attach pwdog at pci
|
|
file dev/pci/pwdog.c pwdog
|
|
|
|
# IBM 4810 BSP cash drawer port
|
|
device ibmcd: gpiobus
|
|
attach ibmcd at pci
|
|
file dev/pci/ibmcd.c ibmcd
|
|
|
|
# SIS 315 Pro frame buffer
|
|
device sisfb: wsemuldisplaydev, rasops8, rasops15, rasops16, rasops32, vcons
|
|
attach sisfb at pci
|
|
file dev/pci/sisfb.c sisfb needs-flag
|
|
|
|
# VirtIO
|
|
device virtio {}
|
|
attach virtio at pci
|
|
file dev/pci/virtio.c virtio
|
|
|
|
attach ld at virtio with ld_virtio
|
|
file dev/pci/ld_virtio.c ld_virtio
|
|
|
|
device viomb
|
|
attach viomb at virtio
|
|
file dev/pci/viomb.c viomb
|
|
|
|
device vioif: ether, ifnet, arp
|
|
attach vioif at virtio
|
|
file dev/pci/if_vioif.c vioif
|
|
|
|
device viornd
|
|
attach viornd at virtio
|
|
file dev/pci/viornd.c viornd
|
|
|
|
device vioscsi: scsi
|
|
attach vioscsi at virtio
|
|
file dev/pci/vioscsi.c vioscsi
|
|
|
|
# Silicon Motion SM712(LynxEM+) frame buffer
|
|
device lynxfb: wsemuldisplaydev, rasops16
|
|
attach lynxfb at pci
|
|
file dev/pci/lynxfb.c lynxfb needs-flag
|
|
|
|
include "dev/pci/igma/files.igma"
|
|
# Intel GMA
|
|
device igma: igmabus, i2cbus, i2c_bitbang, ddc_read_edid, edid
|
|
attach igma at pci
|
|
file dev/pci/igma.c igma
|
|
|
|
# 3Dfx Voodoo Graphics
|
|
defflag opt_tdvfb.h TDVFB_CONSOLE
|
|
device tdvfb: wsemuldisplaydev, rasops16, rasops32, vcons, videomode
|
|
attach tdvfb at pci
|
|
file dev/pci/tdvfb.c tdvfb
|
|
|
|
# nvidia geforce framebuffer console driver
|
|
device gffb: wsemuldisplaydev, rasops8, vcons, videomode, i2cbus, i2c_bitbang, glyphcache
|
|
attach gffb at pci
|
|
file dev/pci/gffb.c gffb
|
|
defflag opt_gffb.h GFFB_DEBUG
|
|
|
|
# Realtek RTS5209/RTS5229 Card Reader driver
|
|
attach rtsx at pci with rtsx_pci
|
|
file dev/pci/rtsx_pci.c rtsx_pci
|
|
|
|
# NVM Express Controller
|
|
attach nvme at pci with nvme_pci
|
|
file dev/pci/nvme_pci.c nvme_pci
|
|
|
|
# PCI graphics devices with DRM/KMS
|
|
include "external/bsd/drm2/pci/files.drmkms_pci"
|
|
|
|
# Intel S1200,C2000 (non-pch) SMBus controller
|
|
device ismt: i2cbus
|
|
attach ismt at pci
|
|
file dev/pci/ismt.c ismt
|