NetBSD/sys/dev/pci/bha_pci.c

153 lines
4.5 KiB
C

/* $NetBSD: bha_pci.c,v 1.40 2014/10/18 08:33:28 snj Exp $ */
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Charles M. Hannum.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: bha_pci.c,v 1.40 2014/10/18 08:33:28 snj Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/bus.h>
#include <sys/intr.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcidevs.h>
#include <dev/ic/bhareg.h>
#include <dev/ic/bhavar.h>
#define PCI_CBIO 0x10
/*
* Check the slots looking for a board we recognise
* If we find one, note its address (slot) and call
* the actual probe routine to check it out.
*/
static int
bha_pci_match(device_t parent, cfdata_t match, void *aux)
{
struct pci_attach_args *pa = aux;
bus_space_tag_t iot;
bus_space_handle_t ioh;
bus_size_t iosize;
int rv;
if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_BUSLOGIC)
return (0);
if (PCI_PRODUCT(pa->pa_id) != PCI_PRODUCT_BUSLOGIC_MULTIMASTER_NC &&
PCI_PRODUCT(pa->pa_id) != PCI_PRODUCT_BUSLOGIC_MULTIMASTER)
return (0);
if (pci_mapreg_map(pa, PCI_CBIO, PCI_MAPREG_TYPE_IO, 0, &iot, &ioh,
NULL, &iosize))
return (0);
rv = bha_find(iot, ioh);
bus_space_unmap(iot, ioh, iosize);
return (rv);
}
/*
* Attach all the sub-devices we can find
*/
static void
bha_pci_attach(device_t parent, device_t self, void *aux)
{
struct pci_attach_args *pa = aux;
struct bha_softc *sc = device_private(self);
bus_space_tag_t iot;
bus_space_handle_t ioh;
pci_chipset_tag_t pc = pa->pa_pc;
pci_intr_handle_t ih;
pcireg_t csr;
const char *model, *intrstr;
char intrbuf[PCI_INTRSTR_LEN];
sc->sc_dev = self;
aprint_naive(": SCSI controller\n");
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_BUSLOGIC_MULTIMASTER_NC)
model = "BusLogic 9xxC SCSI";
else if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_BUSLOGIC_MULTIMASTER)
model = "BusLogic 9xxC SCSI";
else
model = "unknown model!";
aprint_normal(": %s\n", model);
if (pci_mapreg_map(pa, PCI_CBIO, PCI_MAPREG_TYPE_IO, 0, &iot, &ioh,
NULL, NULL)) {
aprint_error_dev(sc->sc_dev, "unable to map device registers\n");
return;
}
sc->sc_iot = iot;
sc->sc_ioh = ioh;
sc->sc_dmat = pa->pa_dmat;
if (!bha_find(iot, ioh))
panic("bha_pci_attach: bha_find failed");
sc->sc_dmaflags = 0;
csr = pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
pci_conf_write(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
csr | PCI_COMMAND_MASTER_ENABLE | PCI_COMMAND_IO_ENABLE);
if (pci_intr_map(pa, &ih)) {
aprint_error_dev(sc->sc_dev, "couldn't map interrupt\n");
return;
}
intrstr = pci_intr_string(pc, ih, intrbuf, sizeof(intrbuf));
sc->sc_ih = pci_intr_establish(pc, ih, IPL_BIO, bha_intr, sc);
if (sc->sc_ih == NULL) {
aprint_error_dev(sc->sc_dev, "couldn't establish interrupt");
if (intrstr != NULL)
aprint_error(" at %s", intrstr);
aprint_error("\n");
return;
}
aprint_normal_dev(sc->sc_dev, "interrupting at %s\n", intrstr);
bha_attach(sc);
bha_disable_isacompat(sc);
}
CFATTACH_DECL_NEW(bha_pci, sizeof(struct bha_softc),
bha_pci_match, bha_pci_attach, NULL, NULL);