NetBSD/etc/Makefile
thorpej 44f4566e1a Change the way kernel sets are specified, and make them
more consistent.  To quote the comment in etc/Makefile
that describes how it's done:

# This target builds the kernels specified by each port.  A port may
# specify the following kernels:
#
#       KERNEL_SETS             The list of kernels that will be
#                               packaged into sets, named
#                               kern-${kernel}.tgz.  These kernels
#                               are also placed in the binary/kernels
#                               area of the release package as
#                               netbsd-${kernel}.gz.
#
#       EXTRA_KERNELS           Additional kernels to place in the
#                               binary/kernels area of the release
#                               package as netbsd-${kernel}.gz, but
#                               which are not placed into sets. This
#                               allows a port to provide e.g. a netbootable
#                               installation kernel containing a ramdisk.
#
#       BUILD_KERNELS           Additional kernels to build which are
#                               not placed into sets nor into the
#                               binary/kernels area of the release
#                               package.  These are typically kernels
#                               that are built for inclusion only in
#                               installation disk/CD-ROM/tape images.
#
2001-11-29 22:45:53 +00:00

399 lines
14 KiB
Makefile

# $NetBSD: Makefile,v 1.196 2001/11/29 22:45:53 thorpej Exp $
# from: @(#)Makefile 8.7 (Berkeley) 5/25/95
# Environment variables without default values:
# DESTDIR must be set before anything in this file will work.
# RELEASEDIR is where the tarred up stuff for a snapshot or
# release will be placed.
#
# Environment variables with default values:
# LOCALTIME will set the default local time for the system you
# build; it determines what /etc/localtime is symlink'd to.
# KERNSRCDIR points to kernel source; it is set by default to ../sys,
# but can be overridden.
# KERNOBJDIR is the kernel build directory, it defaults to
# ${KERNSRCDIR}/arch/${MACHINE}/compile, but can be overridden.
# KERNCONFDIR is where the configuration files for kernels are found;
# default is ${KERNSRCDIR}/arch/${MACHINE}/conf but can be overridden.
# UPDATE is normally undefined; if defined, don't do a 'make clean'
# before kernel compile
# NO_SENDMAIL is normally undefined; if defined, it will not do a
# `make distribution' in the sendmail config file source directory.
#
# Targets:
# distribution: makes a full NetBSD distribution in DESTDIR. If
# INSTALL_DONE is set, it will not do a `make install.'
# if DISTRIBUTION_DONE is set, it will not do anything.
# distrib-dirs: creates an empty NetBSD directory tree in DESTDIR.
# Called by distribution.
# snapshot: calls distribution, above, and then tars up the files
# into a release(7) format in RELEASEDIR. Any port-dependent
# stuff for this target is found in etc.${MACHINE}/Makefile.inc.
# release: a synonym for `snapshot'
# do this before bsd.own.mk so we get correct KERNSRCDIR
.include "../Makefile.inc"
# For NO_SENDMAIL, INSTPRIV, MKCRYPTO
.include <bsd.own.mk>
.MAKEOVERRIDES+= USETOOLS
TZDIR= /usr/share/zoneinfo
LOCALTIME?= UTC
# Flags for creating ISO CDROM image
# mkisofs is expected to be in $PATH, install via pkgsrc/sysutils/cdrecord
MKISOFS?= mkisofs
MKISOFS_FLAGS+= -J -l \
-r -T -v \
-P "The NetBSD Project" \
-m "${RELEASEDIR}/installation/cdrom"
# setting NOOBJ prevents "make obj" from doing anything;
# an objdir would break the installation stuff below
MKOBJ= no
# MD Makefile.inc may append MD targets to BIN[123]. Make sure all
# are empty, to preserve the old semantics of setting them below with "=".
BIN1=
BIN2=
BIN3=
# Directories to build in ${RELEASEDIR}. MD Makefile.inc files can
# add to this.
# NOTE: Parent directories must be listed before subdirectories.
INSTALLATION_DIRS= \
binary binary/sets binary/kernel installation
.if exists(etc.${MACHINE}/Makefile.inc)
.include "etc.${MACHINE}/Makefile.inc"
.endif
# Use multiple jobs for kernel builds, if NBUILDJOBS set.
# (Taken from src/Makefile.)
.if defined(NBUILDJOBS)
_J= -j${NBUILDJOBS}
.endif
# -rw-r--r--
BINOWN= root
BINGRP= wheel
BIN1+= bootptab changelist csh.cshrc csh.login csh.logout daily \
daily.conf dm.conf floppytab ftpchroot ftpusers ftpwelcome \
gettytab group hosts hosts.lpd inetd.conf lkm.conf \
mailer.conf man.conf monthly monthly.conf mrouted.conf \
netconfig networks newsyslog.conf nsswitch.conf ntp.conf \
phones printcap profile protocols rbootd.conf rc rc.conf \
rc.lkm rc.local rc.subr rc.shutdown remote rpc \
security security.conf services shells sysctl.conf syslog.conf \
weekly weekly.conf wscons.conf \
etc.${MACHINE}/ttys etc.${MACHINE}/disktab
.if (${MACHINE_ARCH} == "m68k") || \
(${MACHINE_ARCH} == "ns32k") || \
(${MACHINE_ARCH} == "vax") || \
(${MACHINE_ARCH} == "arm32")
BIN1+= ld.so.conf
.elif exists(etc.${MACHINE_ARCH}/ld.so.conf)
BIN1+= etc.${MACHINE_ARCH}/ld.so.conf
.endif
.if exists(etc.${MACHINE_ARCH}/ttyaction)
BIN1+= etc.${MACHINE_ARCH}/ttyaction
.endif
# -rw-rw-r--
BIN2+= motd
# -rw-------
BIN3+= hosts.equiv
NAMEDB= 127 root.cache named.conf localhost loopback.v6
PCS= pcs750.bin
.if make(release) || make(snapshot) || make(distribution)
# find out endianness of target and set proper flag for pwd_mkdb so that
# it creates database in same endianness
.if exists(${DESTDIR}/usr/include/sys/endian.h)
TARGET_ENDIANNESS!= \
printf '\#include <sys/endian.h>\n_BYTE_ORDER\n' | \
${CC} -I${DESTDIR}/usr/include -E - | tail -1 | awk '{print $$1}'
.else
TARGET_ENDIANNESS=
.endif
.if ${TARGET_ENDIANNESS} == "1234"
TARGET_ENDIANNESS= -L
.elif ${TARGET_ENDIANNESS} == "4321"
TARGET_ENDIANNESS= -B
.else
TARGET_ENDIANNESS=
.endif
.endif
.include <bsd.kernobj.mk>
obj:
mkdir -p ${KERNOBJDIR}
.if !defined(DESTDIR) || ${DESTDIR} == ""
__warndestdir: .USE
@echo setenv DESTDIR before doing that!
@false
distribution distrib-dirs release snapshot snap_pre snap_md_pre \
iso-image: __warndestdir
.if !target(snap_md_post)
snap_md_post: __warndestdir
.endif
.else
distribution: distrib-dirs
.if !defined(DISTRIBUTION_DONE)
.if !defined(INSTALL_DONE)
(cd ..; ${MAKE} _DISTRIB= includes)
(cd ..; ${MAKE} _DISTRIB= install)
.endif
${MAKE} install-etc-files
.endif
install-etc-files:
${INSTALL} ${INSTPRIV} -c -o ${BINOWN} -g ${BINGRP} -m 644 ${BIN1} \
${DESTDIR}/etc
${INSTALL} ${INSTPRIV} -c -o ${BINOWN} -g ${BINGRP} -m 664 ${BIN2} \
${DESTDIR}/etc
${INSTALL} ${INSTPRIV} -c -o ${BINOWN} -g ${BINGRP} -m 600 ${BIN3} \
${DESTDIR}/etc
${INSTALL} ${INSTPRIV} -c -o ${BINOWN} -g ${BINGRP} -m 644 aliases \
${DESTDIR}/etc/mail
${INSTALL} ${INSTPRIV} -c -o root -g wheel -m 600 crontab \
${DESTDIR}/var/cron/tabs/root
${INSTALL} ${INSTPRIV} -c -o root -g wheel -m 600 master.passwd \
${DESTDIR}/etc
pwd_mkdb -p ${TARGET_ENDIANNESS} -d ${DESTDIR}/ \
${DESTDIR}/etc/master.passwd
.if defined(UNPRIVED)
echo "${DESTDIR}/etc/passwd type=file mode=0644 uname=root gname=wheel" \
| sed -e 's|^/|./|g' -e 's|//|/|g' >>${METALOG}
echo "${DESTDIR}/etc/pwd.db type=file mode=0644 uname=root gname=wheel" \
| sed -e 's|^/|./|g' -e 's|//|/|g' >>${METALOG}
echo "${DESTDIR}/etc/spwd.db type=file mode=0600 uname=root gname=wheel" \
| sed -e 's|^/|./|g' -e 's|//|/|g' >>${METALOG}
.endif
${INSTALL} ${INSTPRIV} -c -o ${BINOWN} -g ${BINGRP} -m 555 \
MAKEDEV.local etc.${MACHINE}/MAKEDEV ${DESTDIR}/dev
${INSTALL} ${INSTPRIV} -c -o root -g wheel -m 600 minfree \
${DESTDIR}/var/crash
(cd root; \
${INSTALL} ${INSTPRIV} -c -o root -g wheel -m 644 dot.cshrc \
${DESTDIR}/root/.cshrc; \
${INSTALL} ${INSTPRIV} -c -o root -g wheel -m 600 dot.klogin \
${DESTDIR}/root/.klogin; \
${INSTALL} ${INSTPRIV} -c -o root -g wheel -m 644 dot.login \
${DESTDIR}/root/.login; \
${INSTALL} ${INSTPRIV} -c -o root -g wheel -m 644 dot.profile \
${DESTDIR}/root/.profile; \
${INSTALL} ${INSTPRIV} -c -o root -g wheel -m 644 dot.shrc \
${DESTDIR}/root/.shrc; \
rm -f ${DESTDIR}/.cshrc ${DESTDIR}/.profile; \
${INSTALL} ${INSTPRIV} -l h \
${DESTDIR}/root/.cshrc ${DESTDIR}/.cshrc; \
${INSTALL} ${INSTPRIV} -l h \
${DESTDIR}/root/.profile ${DESTDIR}/.profile)
(cd defaults; ${MAKE} install)
(cd mtree; ${MAKE} install)
(cd namedb; \
${INSTALL} ${INSTPRIV} -c -o ${BINOWN} -g ${BINGRP} -m 644 \
${NAMEDB} ${DESTDIR}/etc/namedb)
(cd rc.d; ${MAKE} install)
${INSTALL} ${INSTPRIV} -l s -o root -g wheel -m 755 \
${TZDIR}/${LOCALTIME} ${DESTDIR}/etc/localtime
${INSTALL} ${INSTPRIV} -l s -o root -g wheel -m 755 \
/usr/sbin/rmt ${DESTDIR}/etc/rmt
${INSTALL} ${INSTPRIV} -c -o ${BINOWN} -g operator -m 664 /dev/null \
${DESTDIR}/etc/dumpdates
${INSTALL} ${INSTPRIV} -c -o ${BINOWN} -g operator -m 600 /dev/null \
${DESTDIR}/etc/skeykeys
${INSTALL} ${INSTPRIV} -c -o root -g wheel -m 600 /dev/null \
${DESTDIR}/var/at/at.deny
${INSTALL} ${INSTPRIV} -c -o root -g wheel -m 600 /dev/null \
${DESTDIR}/var/cron/log
${INSTALL} ${INSTPRIV} -c -o nobody -g ${BINGRP} -m 664 /dev/null \
${DESTDIR}/var/db/locate.database
${INSTALL} ${INSTPRIV} -c -o uucp -g dialer -m 640 /dev/null \
${DESTDIR}/var/log/aculog
${INSTALL} ${INSTPRIV} -c -o ${BINOWN} -g ${BINGRP} -m 600 /dev/null \
${DESTDIR}/var/log/authlog
${INSTALL} ${INSTPRIV} -c -o ${BINOWN} -g ${BINGRP} -m 664 /dev/null \
${DESTDIR}/var/log/lastlog
${INSTALL} ${INSTPRIV} -c -o ${BINOWN} -g ${BINGRP} -m 640 /dev/null \
${DESTDIR}/var/log/lpd-errs
${INSTALL} ${INSTPRIV} -c -o ${BINOWN} -g ${BINGRP} -m 600 /dev/null \
${DESTDIR}/var/log/maillog
${INSTALL} ${INSTPRIV} -c -o ${BINOWN} -g ${BINGRP} -m 644 /dev/null \
${DESTDIR}/var/log/messages
${INSTALL} ${INSTPRIV} -c -o ${BINOWN} -g ${BINGRP} -m 600 /dev/null \
${DESTDIR}/var/log/secure
${INSTALL} ${INSTPRIV} -c -o ${BINOWN} -g ${BINGRP} -m 644 /dev/null \
${DESTDIR}/var/log/sendmail.st
${INSTALL} ${INSTPRIV} -c -o ${BINOWN} -g ${BINGRP} -m 644 /dev/null \
${DESTDIR}/var/log/wtmp
${INSTALL} ${INSTPRIV} -c -o ${BINOWN} -g ${BINGRP} -m 600 /dev/null \
${DESTDIR}/var/log/xferlog
${INSTALL} ${INSTPRIV} -c -o daemon -g staff -m 664 /dev/null \
${DESTDIR}/var/msgs/bounds
${INSTALL} ${INSTPRIV} -c -o ${BINOWN} -g ${BINGRP} -m 664 /dev/null \
${DESTDIR}/var/run/utmp
${INSTALL} ${INSTPRIV} -c -o games -g games -m 664 /dev/null \
${DESTDIR}/var/games/atc_scores
${INSTALL} ${INSTPRIV} -c -o games -g games -m 664 /dev/null \
${DESTDIR}/var/games/battlestar.log
${INSTALL} ${INSTPRIV} -c -o games -g games -m 664 /dev/null \
${DESTDIR}/var/games/cfscores
${INSTALL} ${INSTPRIV} -c -o games -g games -m 664 /dev/null \
${DESTDIR}/var/games/criblog
${INSTALL} ${INSTPRIV} -c -o games -g games -m 664 /dev/null \
${DESTDIR}/var/games/robots_roll
${INSTALL} ${INSTPRIV} -c -o games -g games -m 664 /dev/null \
${DESTDIR}/var/games/rogue.scores
${INSTALL} ${INSTPRIV} -c -o games -g games -m 664 /dev/null \
${DESTDIR}/var/games/saillog
${INSTALL} ${INSTPRIV} -c -o games -g games -m 664 /dev/null \
${DESTDIR}/var/games/snakerawscores
${INSTALL} ${INSTPRIV} -c -o games -g games -m 664 /dev/null \
${DESTDIR}/var/games/snake.log
${INSTALL} ${INSTPRIV} -c -o games -g games -m 664 /dev/null \
${DESTDIR}/var/games/tetris.scores
${INSTALL} ${INSTPRIV} -c -o games -g games -m 664 /dev/null \
${DESTDIR}/var/games/larn/llog12.0
${INSTALL} ${INSTPRIV} -c -o games -g games -m 664 /dev/null \
${DESTDIR}/var/games/larn/lscore12.0
${INSTALL} ${INSTPRIV} -c -o games -g games -m 664 /dev/null \
${DESTDIR}/var/games/larn/playerids
(cd etc.${MACHINE}; ${INSTALL} ${INSTPRIV} -c -o ${BINOWN} \
-g ${BINGRP} -m 444 fstab.* ${DESTDIR}/etc)
(cd skel; ${MAKE} distribution)
(cd ../usr.bin/mail; ${MAKE} distribution)
(cd ../gnu/usr.sbin/postfix/; ${MAKE} distribution)
.if (${MKCRYPTO} != "no")
(cd ../usr.bin/ssh; ${MAKE} distribution)
.endif
.ifndef NO_SENDMAIL
(cd ../gnu/usr.sbin/sendmail/cf/cf; ${MAKE} distribution)
.endif
distrib-dirs:
${INSTALL} ${INSTPRIV} -d -o root -g wheel -m 755 ${DESTDIR}
${MTREE} -def mtree/NetBSD.dist -p ${DESTDIR}/ -U ${UNPRIVED:D-W}
rm -f ${DESTDIR}/sys
${INSTALL} ${INSTPRIV} -l s -o root -g wheel -m 755 \
usr/src/sys ${DESTDIR}/sys
.if !defined(RELEASEDIR)
__warnreleasedir: .USE
@echo setenv RELEASEDIR before doing that!
@false
release snapshot snap_pre snap_md_pre iso-image: __warnreleasedir
.if !target(snap_md_post)
snap_md_post: __warnreleasedir
.endif
.else
release snapshot: distribution snap_pre snap_md_pre snap_kern snap_md_post
(cd ../distrib/sets; ${MAKE} sets)
sh ../distrib/sets/makesums -t ${RELEASEDIR}/binary/kernel '*.gz'
# Standalone target to create a CDROM image after the release
# was composed. Should be run after "make build" in both src and xsrc
iso-image: iso-image_md_post
iso-image_mi: iso-image_md_pre
@if ${MKISOFS} --version; then \
mkdir -p ${RELEASEDIR}/installation/cdrom ; \
${MKISOFS} ${MKISOFS_FLAGS} \
-o ${RELEASEDIR}/installation/cdrom/netbsd-${MACHINE}.iso \
${RELEASEDIR} ; \
sh ../distrib/sets/makesums -t ${RELEASEDIR}/installation/cdrom '*.iso' ; \
else \
echo "install pkgsrc/sysutils/cdrecord and type 'make iso-image'." ; \
fi
# Setup the $RELEASEDIR to produce a bootable CD image:
iso-image_md_pre:
# nothing here -- look in the machine-dependent Makefile.inc
# Fixup the CD-image to be bootable
iso-image_md_post: iso-image_mi
# nothing here -- look in the machine-dependent Makefile.inc
snap_pre:
# Could be a mount point, ignore the errors
-/bin/rm -rf ${RELEASEDIR}
${INSTALL} ${INSTPRIV} -d -o root -g wheel -m 755 ${RELEASEDIR}
.for dir in ${INSTALLATION_DIRS}
${INSTALL} ${INSTPRIV} -d -o root -g wheel -m 755 ${RELEASEDIR}/${dir}
.endfor
# This target builds the kernels specified by each port. A port may
# specify the following kernels:
#
# KERNEL_SETS The list of kernels that will be
# packaged into sets, named
# kern-${kernel}.tgz. These kernels
# are also placed in the binary/kernels
# area of the release package as
# netbsd-${kernel}.gz.
#
# EXTRA_KERNELS Additional kernels to place in the
# binary/kernels area of the release
# package as netbsd-${kernel}.gz, but
# which are not placed into sets. This
# allows a port to provide e.g. a netbootable
# installation kernel containing a ramdisk.
#
# BUILD_KERNELS Additional kernels to build which are
# not placed into sets nor into the
# binary/kernels area of the release
# package. These are typically kernels
# that are built for inclusion only in
# installation disk/CD-ROM/tape images.
#
GETKERNELAWK= awk '/^config/ {print $$2; found=1} \
END{ if (found == 0) print "netbsd"; }'
#
.if !target(snap_kern)
snap_kern:
.ifndef KERNELS_DONE
.for configfile in ${KERNEL_SETS} ${EXTRA_KERNELS} ${BUILD_KERNELS}
cd ${KERNCONFDIR} && ${CONFIG} \
-b ${KERNOBJDIR}/${configfile:C/.*\///} -s ${KERNSRCDIR} ${configfile}
.ifndef UPDATE
cd ${KERNOBJDIR}/${configfile:C/.*\///} && ${MAKE} distclean
.endif
cd ${KERNOBJDIR}/${configfile:C/.*\///} && ${MAKE} depend && ${MAKE} ${_J}
.endfor # build kernels
.for configfile in ${KERNEL_SETS}
cd ${KERNOBJDIR}/${configfile:C/.*\///} && \
tar cf - `${GETKERNELAWK} ${KERNCONFDIR}/${configfile}` | \
gzip -c -9 > ${RELEASEDIR}/binary/sets/kern-${configfile}.tgz
.endfor # make kernel sets
.for configfile in ${KERNEL_SETS} ${EXTRA_KERNELS}
cd ${KERNOBJDIR}/${configfile:C/.*\///} && \
for kernel in `${GETKERNELAWK} \
${KERNCONFDIR}/${configfile:C/.*\///}` ; do \
gzip -c -9 < $${kernel} > \
${RELEASEDIR}/binary/kernel/$${kernel}-${configfile:C/.*\///}.gz ; done
.endfor # place KERNEL_SETS kernels + EXTRA_KERNELS in binary/kernel/...
.endif # KERNELS_DONE
.endif # no target(snap_kern)
.endif # RELEASEDIR check
snap_md_pre:
# nothing here -- look in the machine-dependent Makefile.inc
snap_md_post:
# nothing here -- look in the machine-dependent Makefile.inc
.endif # DESTDIR check
.include <bsd.prog.mk>