NetBSD/sys/dev/mvme/vme_tworeg.h
scw 08bde987bb Separate out devices common to many Motorola mvme boards (68k, 88k and ppc)
in preparation for future mvmeppc and mvme88k ports.

This needs a bit if tidying up to make it trully shareable, which will
happen as the new mvme ports are added.
2002-02-12 20:38:43 +00:00

527 lines
18 KiB
C

/* $NetBSD: vme_tworeg.h,v 1.1 2002/02/12 20:38:51 scw Exp $ */
/*-
* Copyright (c) 1999, 2002 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Steve C. Woodford.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _MVME_VME_TWOREG_H
#define _MVME_VME_TWOREG_H
/*
* Where the VMEchip2's registers live relative to the start
* of the VMEChip2's register space.
*/
#define VME2REG_LCSR_OFFSET 0x0000
#define VME2REG_GCSR_OFFSET 0x0100
/*
* Register map of the Type 2 VMEchip found on many MVME boards.
* Note: Only responds to D32 accesses.
*/
/*
* Slave window configuration registers
*/
#define VME2_SLAVE_WINDOWS 2
#define VME2LCSR_SLAVE_ADDRESS(x) (0x00 + ((x) * 4))
#define VME2_SLAVE_ADDRESS_START_SHIFT 16
#define VME2_SLAVE_ADDRESS_START_MASK (0x0000ffffu)
#define VME2_SLAVE_ADDRESS_END_SHIFT 0
#define VME2_SLAVE_ADDRESS_END_MASK (0xffff0000u)
#define VME2LCSR_SLAVE_TRANS(x) (0x08 + ((x) * 4))
#define VME2_SLAVE_TRANS_SELECT_SHIFT 16
#define VME2_SLAVE_TRANS_SELECT_MASK (0x0000ffffu)
#define VME2_SLAVE_TRANS_ADDRESS_SHIFT 0
#define VME2_SLAVE_TRANS_ADDRESS_MASK (0xffff0000u)
#define VME2LCSR_SLAVE_CTRL 0x10
#define VME2_SLAVE_AMSEL_DAT(x) (1u << (0 + ((x) * 16)))
#define VME2_SLAVE_AMSEL_PGM(x) (1u << (1 + ((x) * 16)))
#define VME2_SLAVE_AMSEL_BLK(x) (1u << (2 + ((x) * 16)))
#define VME2_SLAVE_AMSEL_BLKD64(x) (1u << (3 + ((x) * 16)))
#define VME2_SLAVE_AMSEL_A24(x) (1u << (4 + ((x) * 16)))
#define VME2_SLAVE_AMSEL_A32(x) (1u << (5 + ((x) * 16)))
#define VME2_SLAVE_AMSEL_USR(x) (1u << (6 + ((x) * 16)))
#define VME2_SLAVE_AMSEL_SUP(x) (1u << (7 + ((x) * 16)))
#define VME2_SLAVE_CTRL_WP(x) (1u << (8 + ((x) * 16)))
#define VME2_SLAVE_CTRL_SNOOP_INHIBIT(x) (0u << (9 + ((x) * 16)))
#define VME2_SLAVE_CTRL_SNOOP_WRSINK(x) (1u << (9 + ((x) * 16)))
#define VME2_SLAVE_CTRL_SNOOP_WRINVAL(x) (2u << (9 + ((x) * 16)))
#define VME2_SLAVE_CTRL_ADDER(x) (1u << (11 + ((x) * 16)))
/*
* Master window address control registers
*/
#define VME2_MASTER_WINDOWS 4
#define VME2LCSR_MASTER_ADDRESS(x) (0x14 + ((x) * 4))
#define VME2_MAST_ADDRESS_START_SHIFT 16
#define VME2_MAST_ADDRESS_START_MASK (0x0000ffffu)
#define VME2_MAST_ADDRESS_END_SHIFT 0
#define VME2_MAST_ADDRESS_END_MASK (0xffff0000u)
#define VME2LCSR_MAST4_TRANS 0x24
#define VME2_MAST4_TRANS_SELECT_SHIFT 16
#define VME2_MAST4_TRANS_SELECT_MASK (0x0000ffffu)
#define VME2_MAST4_TRANS_ADDRESS_SHIFT 0
#define VME2_MAST4_TRANS_ADDRESS_MASK (0xffff0000u)
/*
* VMEbus master attribute control register
*/
#define VME2LCSR_MASTER_ATTR 0x28
#define VME2_MASTER_ATTR_AM_SHIFT(x) ((x) * 8)
#define VME2_MASTER_ATTR_AM_MASK (0x0000003fu)
#define VME2_MASTER_ATTR_WP (1u << 6)
#define VME2_MASTER_ATTR_D16 (1u << 7)
/*
* GCSR Group/Board addresses, and
* VMEbus Master Enable Control register, and
* Local to VMEbus I/O Control register, and
* ROM Control register (unused).
*/
#define VME2LCSR_GCSR_ADDRESS 0x2c
#define VME2_GCSR_ADDRESS_SHIFT 16
#define VME2_GCSR_ADDRESS_MASK (0xfff00000u)
#define VME2LCSR_MASTER_ENABLE 0x2c
#define VME2_MASTER_ENABLE_MASK (0x000f0000u)
#define VME2_MASTER_ENABLE(x) (1u << ((x) + 16))
#define VME2LCSR_IO_CONTROL 0x2c
#define VME2_IO_CONTROL_SHIFT 8
#define VME2_IO_CONTROL_MASK (0x0000ff00u)
#define VME2_IO_CONTROL_I1SU (1u << 8)
#define VME2_IO_CONTROL_I1WP (1u << 9)
#define VME2_IO_CONTROL_I1D16 (1u << 10)
#define VME2_IO_CONTROL_I1EN (1u << 11)
#define VME2_IO_CONTROL_I2PD (1u << 12)
#define VME2_IO_CONTROL_I2SU (1u << 13)
#define VME2_IO_CONTROL_I2WP (1u << 14)
#define VME2_IO_CONTROL_I2EN (1u << 15)
/*
* VMEChip2 PROM Decoder, SRAM and DMA Control register
*/
#define VME2LCSR_PROM_SRAM_DMA_CTRL 0x30
#define VME2_PSD_SRAMS_MASK (0x00ff0000u)
#define VME2_PSD_SRAMS_CLKS6 (0u << 16)
#define VME2_PSD_SRAMS_CLKS5 (1u << 16)
#define VME2_PSD_SRAMS_CLKS4 (2u << 16)
#define VME2_PSD_SRAMS_CLKS3 (3u << 16)
#define VME2_PSD_TBLSC_INHIB (0u << 18)
#define VME2_PSD_TBLSC_WRSINK (1u << 18)
#define VME2_PSD_TBLSC_WRINV (2u << 18)
#define VME2_PSD_ROM0 (1u << 20)
#define VME2_PSD_WAITRMW (1u << 21)
/*
* VMEbus requester control register
*/
#define VME2LCSR_VME_REQUESTER_CONTROL 0x30
#define VME2_VMEREQ_CTRL_MASK (0x0000ff00u)
#define VME2_VMEREQ_CTRL_LVREQL_MASK (0x00000300u)
#define VME2_VMEREQ_CTRL_LVREQL(x) ((u_int)(x) << 8)
#define VME2_VMEREQ_CTRL_LVRWD (1u << 10)
#define VME2_VMEREQ_CTRL_LVFAIR (1u << 11)
#define VME2_VMEREQ_CTRL_DWB (1u << 13)
#define VME2_VMEREQ_CTRL_DHB (1u << 14)
#define VME2_VMEREQ_CTRL_ROBN (1u << 15)
/*
* DMAC control register
*/
#define VME2LCSR_DMAC_CONTROL1 0x30
#define VME2_DMAC_CTRL1_MASK (0x000000ffu)
#define VME2_DMAC_CTRL1_DREQL_MASK (0x00000003u)
#define VME2_DMAC_CTRL1_DREQL(x) ((u_int)(x) << 0)
#define VME2_DMAC_CTRL1_DRELM_MASK (0x0000000cu)
#define VME2_DMAC_CTRL1_DRELM(x) ((u_int)(x) << 2)
#define VME2_DMAC_CTRL1_DFAIR (1u << 4)
#define VME2_DMAC_CTRL1_DTBL (1u << 5)
#define VME2_DMAC_CTRL1_DEN (1u << 6)
#define VME2_DMAC_CTRL1_DHALT (1u << 7)
/*
* DMA Control register #2
*/
#define VME2LCSR_DMAC_CONTROL2 0x34
#define VME2_DMAC_CTRL2_MASK (0x0000ffffu)
#define VME2_DMAC_CTRL2_SHIFT 0
#define VME2_DMAC_CTRL2_AM_MASK (0x0000003fu)
#define VME2_DMAC_CTRL2_BLK_D32 (1u << 6)
#define VME2_DMAC_CTRL2_BLK_D64 (3u << 6)
#define VME2_DMAC_CTRL2_D16 (1u << 8)
#define VME2_DMAC_CTRL2_TVME (1u << 9)
#define VME2_DMAC_CTRL2_LINC (1u << 10)
#define VME2_DMAC_CTRL2_VINC (1u << 11)
#define VME2_DMAC_CTRL2_SNOOP_INHIB (0u << 13)
#define VME2_DMAC_CTRL2_SNOOP_WRSNK (1u << 13)
#define VME2_DMAC_CTRL2_SNOOP_WRINV (2u << 13)
#define VME2_DMAC_CTRL2_INTE (1u << 15)
/*
* DMA Controller Local Bus and VMEbus Addresses, Byte
* Counter and Table Address Counter registers
*/
#define VME2LCSR_DMAC_LOCAL_ADDRESS 0x38
#define VME2LCSR_DMAC_VME_ADDRESS 0x3c
#define VME2LCSR_DMAC_BYTE_COUNTER 0x40
#define VME2LCSR_DMAC_TABLE_ADDRESS 0x44
/*
* VMEbus Interrupter Control register
*/
#define VME2LCSR_INTERRUPT_CONTROL 0x48
#define VME2_INT_CTRL_MASK (0xff000000u)
#define VME2_INT_CTRL_SHIFT 24
#define VME2_INT_CTRL_IRQL_MASK (0x07000000u)
#define VME2_INT_CTRL_IRQS (1u << 27)
#define VME2_INT_CTRL_IRQC (1u << 28)
#define VME2_INT_CTRL_IRQ1S_INT (0u << 29)
#define VME2_INT_CTRL_IRQ1S_TICK1 (1u << 29)
#define VME2_INT_CTRL_IRQ1S_TICK2 (3u << 29)
/*
* VMEbus Interrupt Vector register
*/
#define VME2LCSR_INTERRUPT_VECTOR 0x48
#define VME2_INTERRUPT_VECTOR_MASK (0x00ff0000u)
#define VME2_INTERRUPT_VECTOR_SHIFT 16
/*
* MPU Status register
*/
#define VME2LCSR_MPU_STATUS 0x48
#define VME2_MPU_STATUS_MLOB (1u << 0)
#define VME2_MPU_STATUS_MLPE (1u << 1)
#define VME2_MPU_STATUS_MLBE (1u << 2)
#define VME2_MPU_STATUS_MCLR (1u << 3)
/*
* DMA Interrupt Count register
*/
#define VME2LCSR_DMAC_INTERRUPT_CONTROL 0x48
#define VME2_DMAC_INT_COUNT_MASK (0x0000f000u)
#define VME2_DMAC_INT_COUNT_SHIFT 12
/*
* DMA Controller Status register
*/
#define VME2LCSR_DMAC_STATUS 0x48
#define VME2_DMAC_STATUS_DONE (1u << 0)
#define VME2_DMAC_STATUS_VME (1u << 1)
#define VME2_DMAC_STATUS_TBL (1u << 2)
#define VME2_DMAC_STATUS_DLTO (1u << 3)
#define VME2_DMAC_STATUS_DLOB (1u << 4)
#define VME2_DMAC_STATUS_DLPE (1u << 5)
#define VME2_DMAC_STATUS_DLBE (1u << 6)
#define VME2_DMAC_STATUS_MLTO (1u << 7)
/*
* VMEbus Arbiter Time-out register
*/
#define VME2LCSR_VME_ARB_TIMEOUT 0x4c
#define VME2_VME_ARB_TIMEOUT_ENAB (1u << 24)
/*
* DMA Controller Timers and VMEbus Global Time-out Control registers
*/
#define VME2LCSR_DMAC_TIME_ONOFF 0x4c
#define VME2_DMAC_TIME_ON_MASK (0x001c0000u)
#define VME2_DMAC_TIME_ON_16US (0u << 18)
#define VME2_DMAC_TIME_ON_32US (1u << 18)
#define VME2_DMAC_TIME_ON_64US (2u << 18)
#define VME2_DMAC_TIME_ON_128US (3u << 18)
#define VME2_DMAC_TIME_ON_256US (4u << 18)
#define VME2_DMAC_TIME_ON_512US (5u << 18)
#define VME2_DMAC_TIME_ON_1024US (6u << 18)
#define VME2_DMAC_TIME_ON_DONE (7u << 18)
#define VME2_DMAC_TIME_OFF_MASK (0x00e00000u)
#define VME2_DMAC_TIME_OFF_0US (0u << 21)
#define VME2_DMAC_TIME_OFF_16US (1u << 21)
#define VME2_DMAC_TIME_OFF_32US (2u << 21)
#define VME2_DMAC_TIME_OFF_64US (3u << 21)
#define VME2_DMAC_TIME_OFF_128US (4u << 21)
#define VME2_DMAC_TIME_OFF_256US (5u << 21)
#define VME2_DMAC_TIME_OFF_512US (6u << 21)
#define VME2_DMAC_TIME_OFF_1024US (7u << 21)
#define VME2_VME_GLOBAL_TO_MASK (0x00030000u)
#define VME2_VME_GLOBAL_TO_8US (0u << 16)
#define VME2_VME_GLOBAL_TO_16US (1u << 16)
#define VME2_VME_GLOBAL_TO_256US (2u << 16)
#define VME2_VME_GLOBAL_TO_DISABLE (3u << 16)
/*
* VME Access, Local Bus and Watchdog Time-out Control register
*/
#define VME2LCSR_VME_ACCESS_TIMEOUT 0x4c
#define VME2_VME_ACCESS_TIMEOUT_MASK (0x0000c000u)
#define VME2_VME_ACCESS_TIMEOUT_64US (0u << 14)
#define VME2_VME_ACCESS_TIMEOUT_1MS (1u << 14)
#define VME2_VME_ACCESS_TIMEOUT_32MS (2u << 14)
#define VME2_VME_ACCESS_TIMEOUT_DISABLE (3u << 14)
#define VME2LCSR_LOCAL_BUS_TIMEOUT 0x4c
#define VME2_LOCAL_BUS_TIMEOUT_MASK (0x00003000u)
#define VME2_LOCAL_BUS_TIMEOUT_64US (0u << 12)
#define VME2_LOCAL_BUS_TIMEOUT_1MS (1u << 12)
#define VME2_LOCAL_BUS_TIMEOUT_32MS (2u << 12)
#define VME2_LOCAL_BUS_TIMEOUT_DISABLE (3u << 12)
#define VME2LCSR_WATCHDOG_TIMEOUT 0x4c
#define VME2_WATCHDOG_TIMEOUT_MASK (0x00000f00u)
#define VME2_WATCHDOG_TIMEOUT_512US (0u << 8)
#define VME2_WATCHDOG_TIMEOUT_1MS (1u << 8)
#define VME2_WATCHDOG_TIMEOUT_2MS (2u << 8)
#define VME2_WATCHDOG_TIMEOUT_4MS (3u << 8)
#define VME2_WATCHDOG_TIMEOUT_8MS (4u << 8)
#define VME2_WATCHDOG_TIMEOUT_16MS (5u << 8)
#define VME2_WATCHDOG_TIMEOUT_32MS (6u << 8)
#define VME2_WATCHDOG_TIMEOUT_64MS (7u << 8)
#define VME2_WATCHDOG_TIMEOUT_128MS (8u << 8)
#define VME2_WATCHDOG_TIMEOUT_256MS (9u << 8)
#define VME2_WATCHDOG_TIMEOUT_512MS (10u << 8)
#define VME2_WATCHDOG_TIMEOUT_1S (11u << 8)
#define VME2_WATCHDOG_TIMEOUT_4S (12u << 8)
#define VME2_WATCHDOG_TIMEOUT_16S (13u << 8)
#define VME2_WATCHDOG_TIMEOUT_32S (14u << 8)
#define VME2_WATCHDOG_TIMEOUT_64S (15u << 8)
/*
* Prescaler Control register
*/
#define VME2LCSR_PRESCALER_CONTROL 0x4c
#define VME2_PRESCALER_MASK (0x000000ffu)
#define VME2_PRESCALER_SHIFT 0
#define VME2_PRESCALER_CTRL(c) (256 - (c))
/*
* Tick Timer registers
*/
#define VME2LCSR_TIMER_COMPARE(x) (0x50 + ((x) * 8))
#define VME2LCSR_TIMER_COUNTER(x) (0x54 + ((x) * 8))
/*
* Board Control register
*/
#define VME2LCSR_BOARD_CONTROL 0x60
#define VME2_BOARD_CONTROL_RSWE (1u << 24)
#define VME2_BOARD_CONTROL_BDFLO (1u << 25)
#define VME2_BOARD_CONTROL_CPURS (1u << 26)
#define VME2_BOARD_CONTROL_PURS (1u << 27)
#define VME2_BOARD_CONTROL_BRFLI (1u << 28)
#define VME2_BOARD_CONTROL_SFFL (1u << 29)
#define VME2_BOARD_CONTROL_SCON (1u << 30)
/*
* Watchdog Timer Control register
*/
#define VME2LCSR_WATCHDOG_TIMER_CONTROL 0x60
#define VME2_WATCHDOG_TCONTROL_WDEN (1u << 16)
#define VME2_WATCHDOG_TCONTTRL_WDRSE (1u << 17)
#define VME2_WATCHDOG_TCONTTRL_WDSL (1u << 18)
#define VME2_WATCHDOG_TCONTTRL_WDBFE (1u << 19)
#define VME2_WATCHDOG_TCONTTRL_WDTO (1u << 20)
#define VME2_WATCHDOG_TCONTTRL_WDCC (1u << 21)
#define VME2_WATCHDOG_TCONTTRL_WDCS (1u << 22)
#define VME2_WATCHDOG_TCONTTRL_SRST (1u << 23)
/*
* Tick Timer Control registers
*/
#define VME2LCSR_TIMER_CONTROL 0x60
#define VME2_TIMER_CONTROL_EN(x) (1u << (0 + ((x) * 8)))
#define VME2_TIMER_CONTROL_COC(x) (1u << (1 + ((x) * 8)))
#define VME2_TIMER_CONTROL_COF(x) (1u << (2 + ((x) * 8)))
#define VME2_TIMER_CONTROL_OVF_SHIFT(x) (4 + ((x) * 8))
#define VME2_TIMER_CONTROL_OVF_MASK(x) (0x000000f0u << (4 + ((x) * 8)))
/*
* Prescaler Counter register
*/
#define VME2LCSR_PRESCALER_COUNTER 0x64
/*
* Local Bus Interrupter Status/Enable/Clear registers
*/
#define VME2LCSR_LOCAL_INTERRUPT_STATUS 0x68
#define VME2LCSR_LOCAL_INTERRUPT_ENABLE 0x6c
#define VME2LCSR_LOCAL_INTERRUPT_CLEAR 0x74
#define VME2_LOCAL_INTERRUPT(x) (1u << (x))
#define VME2_LOCAL_INTERRUPT_VME(x) (1u << ((x) - 1))
#define VME2_LOCAL_INTERRUPT_SWINT(x) (1u << ((x) + 8))
#define VME2_LOCAL_INTERRUPT_LM(x) (1u << ((x) + 16))
#define VME2_LOCAL_INTERRUPT_SIG(x) (1u << ((x) + 18))
#define VME2_LOCAL_INTERRUPT_DMAC (1u << 22)
#define VME2_LOCAL_INTERRUPT_VIA (1u << 23)
#define VME2_LOCAL_INTERRUPT_TIC(x) (1u << ((x) + 24))
#define VME2_LOCAL_INTERRUPT_VI1E (1u << 26)
#define VME2_LOCAL_INTERRUPT_PE (1u << 27)
#define VME2_LOCAL_INTERRUPT_MWP (1u << 28)
#define VME2_LOCAL_INTERRUPT_SYSF (1u << 29)
#define VME2_LOCAL_INTERRUPT_ABORT (1u << 30)
#define VME2_LOCAL_INTERRUPT_ACFAIL (1u << 31)
#define VME2_LOCAL_INTERRUPT_CLEAR_ALL (0xffffff00u)
/*
* Software Interrupt Set register
*/
#define VME2LCSR_SOFTINT_SET 0x70
#define VME2_SOFTINT_SET(x) (1u << ((x) + 8))
/*
* Interrupt Level registers
*/
#define VME2LCSR_INTERRUPT_LEVEL_BASE 0x78
#define VME2_NUM_IL_REGS 4
#define VME2_ILOFFSET_FROM_VECTOR(v) (((((VME2_NUM_IL_REGS*8)-1)-(v))/8)<<2)
#define VME2_ILSHIFT_FROM_VECTOR(v) (((v) & 7) * 4)
#define VME2_INTERRUPT_LEVEL_MASK (0x0fu)
/*
* Vector Base register
*/
#define VME2LCSR_VECTOR_BASE 0x88
#define VME2_VECTOR_BASE_MASK (0xff000000u)
#define VME2_VECTOR_BASE_REG_VALUE (0x76000000u)
#define VME2_VECTOR_BASE (0x60u)
#define VME2_VECTOR_LOCAL_OFFSET (0x08u)
#define VME2_VECTOR_LOCAL_MIN (VME2_VECTOR_BASE + 0x08u)
#define VME2_VECTOR_LOCAL_MAX (VME2_VECTOR_BASE + 0x1fu)
#define VME2_VEC_SOFT0 (VME2_VECTOR_BASE + 0x08u)
#define VME2_VEC_SOFT1 (VME2_VECTOR_BASE + 0x09u)
#define VME2_VEC_SOFT2 (VME2_VECTOR_BASE + 0x0au)
#define VME2_VEC_SOFT3 (VME2_VECTOR_BASE + 0x0bu)
#define VME2_VEC_SOFT4 (VME2_VECTOR_BASE + 0x0cu)
#define VME2_VEC_SOFT5 (VME2_VECTOR_BASE + 0x0du)
#define VME2_VEC_SOFT6 (VME2_VECTOR_BASE + 0x0eu)
#define VME2_VEC_SOFT7 (VME2_VECTOR_BASE + 0x0fu)
#define VME2_VEC_GCSRLM0 (VME2_VECTOR_BASE + 0x10u)
#define VME2_VEC_GCSRLM1 (VME2_VECTOR_BASE + 0x11u)
#define VME2_VEC_GCSRSIG0 (VME2_VECTOR_BASE + 0x12u)
#define VME2_VEC_GCSRSIG1 (VME2_VECTOR_BASE + 0x13u)
#define VME2_VEC_GCSRSIG2 (VME2_VECTOR_BASE + 0x14u)
#define VME2_VEC_GCSRSIG3 (VME2_VECTOR_BASE + 0x15u)
#define VME2_VEC_DMAC (VME2_VECTOR_BASE + 0x16u)
#define VME2_VEC_VIA (VME2_VECTOR_BASE + 0x17u)
#define VME2_VEC_TT1 (VME2_VECTOR_BASE + 0x18u)
#define VME2_VEC_TT2 (VME2_VECTOR_BASE + 0x19u)
#define VME2_VEC_IRQ1 (VME2_VECTOR_BASE + 0x1au)
#define VME2_VEC_PARITY_ERROR (VME2_VECTOR_BASE + 0x1bu)
#define VME2_VEC_MWP_ERROR (VME2_VECTOR_BASE + 0x1cu)
#define VME2_VEC_SYSFAIL (VME2_VECTOR_BASE + 0x1du)
#define VME2_VEC_ABORT (VME2_VECTOR_BASE + 0x1eu)
#define VME2_VEC_ACFAIL (VME2_VECTOR_BASE + 0x1fu)
/*
* I/O Control register #1
*/
#define VME2LCSR_GPIO_DIRECTION 0x88
#define VME2_GPIO_DIRECTION_OUT(x) (1u << ((x) + 16))
/*
* Misc. Status register
*/
#define VME2LCSR_MISC_STATUS 0x88
#define VME2_MISC_STATUS_ABRTL (1u << 20)
#define VME2_MISC_STATUS_ACFL (1u << 21)
#define VME2_MISC_STATUS_SYSFL (1u << 22)
#define VME2_MISC_STATUS_MIEN (1u << 23)
/*
* GPIO Status register
*/
#define VME2LCSR_GPIO_STATUS 0x88
#define VME2_GPIO_STATUS(x) (1u << ((x) + 8))
/*
* GPIO Control register #2
*/
#define VME2LCSR_GPIO_CONTROL 0x88
#define VME2_GPIO_CONTROL_SET(x) (1u << ((x) + 12))
/*
* General purpose input registers
*/
#define VME2LCSR_GP_INPUTS 0x88
#define VME2_GP_INPUT(x) (1u << (x))
/*
* Miscellaneous Control register
*/
#define VME2LCSR_MISC_CONTROL 0x8c
#define VME2_MISC_CONTROL_DISBGN (1u << 0)
#define VME2_MISC_CONTROL_ENINT (1u << 1)
#define VME2_MISC_CONTROL_DISBSYT (1u << 2)
#define VME2_MISC_CONTROL_NOELBBSY (1u << 3)
#define VME2_MISC_CONTROL_DISMST (1u << 4)
#define VME2_MISC_CONTROL_DISSRAM (1u << 5)
#define VME2_MISC_CONTROL_REVEROM (1u << 6)
#define VME2_MISC_CONTROL_MPIRQEN (1u << 7)
#define VME2LCSR_SIZE 0x90
#define vme2_lcsr_read(s,r) \
bus_space_read_4((s)->sc_mvmebus.sc_bust, (s)->sc_lcrh, (r))
#define vme2_lcsr_write(s,r,v) \
bus_space_write_4((s)->sc_mvmebus.sc_bust, (s)->sc_lcrh, (r), (v))
/*
* Locations of the three fixed VMEbus I/O ranges
*/
#define VME2_IO0_LOCAL_START (0xffff0000u)
#define VME2_IO0_MASK (0x0000ffffu)
#define VME2_IO0_VME_START (0x00000000u)
#define VME2_IO0_VME_END (0x0000ffffu)
#define VME2_IO1_LOCAL_START (0xf0000000u)
#define VME2_IO1_MASK (0x00ffffffu)
#define VME2_IO1_VME_START (0x00000000u)
#define VME2_IO1_VME_END (0x00ffffffu)
#define VME2_IO2_LOCAL_START (0x00000000u)
#define VME2_IO2_MASK (0xffffffffu)
#define VME2_IO2_VME_START (0xf1000000u) /* Maybe starts@ 0x0? */
#define VME2_IO2_VME_END (0xff7fffffu)
#endif /* _MVME_VME_TWOREG_H */