NetBSD/sys/dev/pci/pciide_cmd_reg.h
bouyer bd0766459c Add support for the CMD PCI646U. Linux claims that this driver is brocken
with UDMA, so enable Ultra-DMA only if "options PCIIDE_CMD0646U_UDMA" is set.
2000-08-02 20:23:45 +00:00

109 lines
4.1 KiB
C

/* $NetBSD: pciide_cmd_reg.h,v 1.9 2000/08/02 20:23:46 bouyer Exp $ */
/*
* Copyright (c) 1998 Manuel Bouyer.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/*
* Registers definitions for CMD Technologies's PCI 064x IDE controllers.
* Available from http://www.cmd.com/
*/
/* Interesting revision of the 0646 */
#define CMD0646U2_REV 0x05
#define CMD0646U_REV 0x03
/* Configuration (RO) */
#define CMD_CONF 0x50
#define CMD_CONF_REV_MASK 0x03 /* 0640/3/6 only */
#define CMD_CONF_DRV0_INTR 0x04
#define CMD_CONF_DEVID 0x18 /* 0640/3/6 only */
#define CMD_CONF_VESAPRT 0x20 /* 0640/3/6 only */
#define CMD_CONF_DSA1 0x40
#define CMD_CONF_DSA0 0x80 /* 0640/3/6 only */
/* Control register (RW) */
#define CMD_CTRL 0x51
#define CMD_CTRL_HR_FIFO 0x01 /* 0640/3/6 only */
#define CMD_CTRL_HW_FIFO 0x02 /* 0640/3/6 only */
#define CMD_CTRL_DEVSEL 0x04
#define CMD_CTRL_2PORT 0x08
#define CMD_CTRL_PAR 0x10 /* 0640/3/6 only */
#define CMD_CTRL_HW_HLD 0x20 /* 0640/3/6 only */
#define CMD_CTRL_DRV0_RAHEAD 0x40
#define CMD_CTRL_DRV1_RAHEAD 0x80
/*
* data read/write timing registers . 0640 uses the same for drive 0 and 1
* on the secondary channel
*/
#define CMD_DATA_TIM(chan, drive) \
(((chan) == 0) ? \
((drive) == 0) ? 0x54: 0x56 \
: \
((drive) == 0) ? 0x58 : 0x5b)
/* secondary channel status and addr timings */
#define CMD_ARTTIM23 0x57
#define CMD_ARTTIM23_IRQ 0x10
#define CMD_ARTTIM23_RHAEAD(d) ((0x4) << (d))
/* DMA master read mode select */
#define CMD_DMA_MODE 0x71
#define CMD_DMA_MASK 0x03
#define CMD_DMA 0x00
#define CMD_DMA_MULTIPLE 0x01
#define CMD_DMA_LINE 0x03
/* the followings bits are only for 0646U/646U2/648/649 */
#define CMD_DMA_IRQ(chan) (0x4 << (chan))
#define CMD_DMA_IRQ_DIS(chan) (0x10 << (chan))
#define CMD_DMA_RST 0x40
/* the followings are only for 0646U/646U2/648/649 */
/* busmaster control/status register */
#define CMD_BICSR 0x79
#define CMD_BICSR_80(chan) (0x01 << (chan))
/* Ultra/DMA timings reg */
#define CMD_UDMATIM(channel) (0x73 + (8 * (channel)))
#define CMD_UDMATIM_UDMA(drive) (0x01 << (drive))
#define CMD_UDMATIM_UDMA33(drive) (0x04 << (drive))
#define CMD_UDMATIM_TIM_MASK 0x3
#define CMD_UDMATIM_TIM_OFF(drive) (4 + ((drive) * 2))
static int8_t cmd0646_9_tim_udma[] = {0x03, 0x02, 0x01, 0x02, 0x01};
/*
* timings values for the 0643/6/8/9
* for all dma_mode we have to have
* DMA_timings(dma_mode) >= PIO_timings(dma_mode + 2)
*/
static int8_t cmd0643_9_data_tim_pio[] = {0xA9, 0x57, 0x44, 0x32, 0x3F};
static int8_t cmd0643_9_data_tim_dma[] = {0x87, 0x32, 0x3F};