NetBSD/sys/dev/isa/dpt_isa.c

322 lines
8.6 KiB
C

/* $NetBSD: dpt_isa.c,v 1.4 2000/06/30 13:36:47 ad Exp $ */
/*
* Copyright (c) 1999, 2000 Andrew Doran <ad@NetBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/*
* ISA front-end for DPT EATA SCSI driver.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: dpt_isa.c,v 1.4 2000/06/30 13:36:47 ad Exp $");
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <machine/bus.h>
#include <machine/intr.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <dev/isa/isareg.h>
#include <dev/isa/isavar.h>
#include <dev/isa/isadmareg.h>
#include <dev/isa/isadmavar.h>
#include <dev/ic/dptreg.h>
#include <dev/ic/dptvar.h>
#define DPT_ISA_IOSIZE 16
#define DPT_ISA_MAXCCBS 16
static int dpt_isa_match __P((struct device *, struct cfdata *, void *));
static void dpt_isa_attach __P((struct device *, struct device *, void *));
static int dpt_isa_probe __P((struct isa_attach_args *, int));
static int dpt_isa_wait __P((bus_space_handle_t, bus_space_tag_t, u_int8_t,
u_int8_t));
struct cfattach dpt_isa_ca = {
sizeof(struct dpt_softc), dpt_isa_match, dpt_isa_attach
};
/* Try 'less intrusive' addresses first */
static int dpt_isa_iobases[] = { 0x230, 0x330, 0x1f0, 0x170, -1 };
/*
* Wait for the HBA status register to reach a specific state.
*/
static int
dpt_isa_wait(ioh, iot, mask, state)
bus_space_handle_t ioh;
bus_space_tag_t iot;
u_int8_t mask, state;
{
int ms;
for (ms = 2000 * 10; ms; ms--) {
if ((bus_space_read_1(iot, ioh, HA_STATUS) & mask) == state)
return (0);
DELAY(100);
}
return (-1);
}
/*
* Match a supported board.
*/
static int
dpt_isa_match(parent, match, aux)
struct device *parent;
struct cfdata *match;
void *aux;
{
struct isa_attach_args *ia;
int i;
ia = aux;
if (ia->ia_iobase != ISACF_PORT_DEFAULT)
return (dpt_isa_probe(ia, ia->ia_iobase));
for (i = 0; dpt_isa_iobases[i] != -1; i++) {
if (dpt_isa_probe(ia, dpt_isa_iobases[i])) {
ia->ia_iobase = dpt_isa_iobases[i];
return (1);
}
}
return (0);
}
/*
* Probe for a supported board.
*/
static int
dpt_isa_probe(ia, iobase)
struct isa_attach_args *ia;
int iobase;
{
struct eata_cfg ec;
bus_space_handle_t ioh;
bus_space_tag_t iot;
int i, j, stat;
u_int16_t *p;
iot = ia->ia_iot;
if (bus_space_map(iot, iobase, DPT_ISA_IOSIZE, 0, &ioh) != 0)
return(0);
/*
* Assumuing the DPT BIOS reset the board, we shouldn't need to
* re-do it here. The tests below should weed out non-EATA devices
* before we start poking any registers.
*/
for (i = 1000; i; i--) {
if ((bus_space_read_1(iot, ioh, HA_STATUS) & HA_ST_READY) != 0)
break;
DELAY(2000);
}
if (i == 0) {
bus_space_unmap(iot, ioh, DPT_ISA_IOSIZE);
return (0);
}
while((((stat = bus_space_read_1(iot, ioh, HA_STATUS))
!= (HA_ST_READY|HA_ST_SEEK_COMPLETE))
&& (stat != (HA_ST_READY|HA_ST_SEEK_COMPLETE|HA_ST_ERROR))
&& (stat != (HA_ST_READY|HA_ST_SEEK_COMPLETE|HA_ST_ERROR|HA_ST_DRQ)))
|| (dpt_isa_wait(ioh, iot, HA_ST_BUSY, 0))) {
/* RAID drives still spinning up? */
if((bus_space_read_1(iot, ioh, HA_ERROR) != 'D')
|| (bus_space_read_1(iot, ioh, HA_ERROR + 1) != 'P')
|| (bus_space_read_1(iot, ioh, HA_ERROR + 2) != 'T')) {
bus_space_unmap(iot, ioh, DPT_ISA_IOSIZE);
return (0);
}
}
/*
* At this point we can be confident that we are dealing with a DPT
* HBA. Issue the read-config command and wait for the data to
* appear. XXX we shouldn't be doing this with PIO, but it makes it
* a lot easier as no DMA setup is required.
*/
bus_space_write_1(iot, ioh, HA_COMMAND, CP_PIO_GETCFG);
memset(&ec, 0, sizeof(ec));
i = ((int)&((struct eata_cfg *)0)->ec_cfglen +
sizeof(ec.ec_cfglen)) >> 1;
p = (u_int16_t *)&ec;
if (dpt_isa_wait(ioh, iot, 0xFF, HA_ST_DATA_RDY)) {
bus_space_unmap(iot, ioh, DPT_ISA_IOSIZE);
return (0);
}
/* Begin reading */
while (i--)
*p++ = bus_space_read_2(iot, ioh, HA_DATA);
if ((i = ec.ec_cfglen) > (sizeof(struct eata_cfg)
- (int)(&(((struct eata_cfg *)0L)->ec_cfglen))
- sizeof(ec.ec_cfglen)))
i = sizeof(struct eata_cfg)
- (int)(&(((struct eata_cfg *)0L)->ec_cfglen))
- sizeof(ec.ec_cfglen);
j = i + (int)(&(((struct eata_cfg *)0L)->ec_cfglen)) +
sizeof(ec.ec_cfglen);
i >>= 1;
while (i--)
*p++ = bus_space_read_2(iot, ioh, HA_DATA);
/* Flush until we have read 512 bytes. */
i = (512 - j + 1) >> 1;
while (i--)
bus_space_read_2(iot, ioh, HA_DATA);
/* Puke if we don't like the returned configuration data. */
if ((bus_space_read_1(iot, ioh, HA_STATUS) & HA_ST_ERROR) != 0 ||
memcmp(ec.ec_eatasig, "EATA", 4) != 0 ||
(ec.ec_feat0 & (EC_F0_HBA_VALID | EC_F0_DMA_SUPPORTED)) !=
(EC_F0_HBA_VALID | EC_F0_DMA_SUPPORTED)) {
bus_space_unmap(iot, ioh, DPT_ISA_IOSIZE);
return (0);
}
/*
* Which DMA channel to use: if it was hardwired in the kernel
* configuration, use that value. If the HBA told us, use that
* value. Otherwise, puke.
*/
if (ia->ia_drq == -1) {
int dmanum = ((ec.ec_feat1 & EC_F1_DMA_NUM_MASK) >>
EC_F1_DMA_NUM_SHIFT);
if ((ec.ec_feat0 & EC_F0_DMA_NUM_VALID) == 0 || dmanum > 3) {
bus_space_unmap(iot, ioh, DPT_ISA_IOSIZE);
return (0);
}
ia->ia_drq = "\0\7\6\5"[dmanum];
}
/*
* Which IRQ to use: if it was hardwired in the kernel configuration,
* use that value. Otherwise, use what the HBA told us.
*/
if (ia->ia_irq == -1)
ia->ia_irq = ((ec.ec_feat1 & EC_F1_IRQ_NUM_MASK) >>
EC_F1_IRQ_NUM_SHIFT);
ia->ia_msize = 0;
ia->ia_iosize = DPT_ISA_IOSIZE;
bus_space_unmap(iot, ioh, DPT_ISA_IOSIZE);
return (1);
}
/*
* Attach a matched board.
*/
static void
dpt_isa_attach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct isa_attach_args *ia;
isa_chipset_tag_t ic;
bus_space_handle_t ioh;
bus_space_tag_t iot;
struct dpt_softc *sc;
struct eata_cfg *ec;
int error;
ia = aux;
sc = (struct dpt_softc *)self;
iot = ia->ia_iot;
ic = ia->ia_ic;
printf(": ");
if ((error = bus_space_map(iot, ia->ia_iobase, DPT_ISA_IOSIZE, 0,
&ioh)) != 0) {
printf("can't map i/o space, error = %d\n", error);
return;
}
sc->sc_iot = iot;
sc->sc_ioh = ioh;
sc->sc_dmat = ia->ia_dmat;
if ((error = isa_dmacascade(ic, ia->ia_drq)) != 0) {
printf("unable to cascade DRQ, error = %d\n", error);
return;
}
/* Establish the interrupt. */
if ((sc->sc_ih = isa_intr_establish(ic, ia->ia_irq, IST_EDGE, IPL_BIO,
dpt_intr, sc)) == NULL) {
printf("can't establish interrupt\n");
return;
}
if (dpt_readcfg(sc)) {
printf("readcfg failed - see dpt(4)\n");
return;
}
/*
* Now attach to the bus-independent code. XXX We need to force
* parameters that aren't filled in by some ISA boards. In
* particular, due to the limited amount of memory we have to play
* with for DMA, clamp the number of CCBs to 16. I don't know if
* making the DMA map non-contigiuous would allow us to play with
* more CCBs, but in any case that *could* cause a performance hit,
* at least for ISA HBAs.
*/
ec = &sc->sc_ec;
if (be16toh(*(int16_t *)ec->ec_queuedepth) > DPT_ISA_MAXCCBS)
*(int16_t *)ec->ec_queuedepth = htobe16(DPT_ISA_MAXCCBS);
if (ec->ec_maxlun == 0)
ec->ec_maxlun = 7;
if ((ec->ec_feat3 & EC_F3_MAX_TARGET_MASK) >> EC_F3_MAX_TARGET_SHIFT
== 0)
ec->ec_feat3 = (ec->ec_feat3 & ~EC_F3_MAX_TARGET_MASK) |
(7 << EC_F3_MAX_TARGET_SHIFT);
/* Now attach to the bus-independent code */
dpt_init(sc, NULL);
}