NetBSD/sys/arch/arm/rockchip/rockchip_dwctwo.c
2015-08-30 13:02:42 +00:00

167 lines
5.2 KiB
C

/* $NetBSD: rockchip_dwctwo.c,v 1.5 2015/08/30 13:02:42 skrll Exp $ */
/*-
* Copyright (c) 2013 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Nick Hudson
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: rockchip_dwctwo.c,v 1.5 2015/08/30 13:02:42 skrll Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/mutex.h>
#include <sys/bus.h>
#include <sys/workqueue.h>
#include <arm/rockchip/rockchip_reg.h>
#include <arm/rockchip/rockchip_var.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdivar.h>
#include <dev/usb/usb_mem.h>
#include <dwc2/dwc2var.h>
#include <dwc2/dwc2.h>
#include "dwc2_core.h"
struct rkdwc2_softc {
struct dwc2_softc sc_dwc2;
void *sc_ih;
};
static struct dwc2_core_params rkdwc2_params = {
.otg_cap = 2, /* 0 - HNP/SRP capable */
.otg_ver = 0, /* 0 - 1.3 */
.dma_enable = 1, /* 1 - DMA (default, if available) */
.dma_desc_enable = 1, /* 1 - Descriptor DMA (default, if available) */
.speed = 0, /* 0 - High Speed */
.enable_dynamic_fifo = 1, /* 1 - Allow dynamic FIFO sizing (default, if available) */
.en_multiple_tx_fifo = 1, /* Specifies whether dedicated per-endpoint transmit FIFOs are enabled */
.host_rx_fifo_size = 520, /* 520 DWORDs */
.host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
.host_perio_tx_fifo_size = 256, /* 256 DWORDs */
.max_transfer_size = 65535,/* 2047 to 65,535 */
.max_packet_count = 511, /* 15 to 511 */
.host_channels = 8, /* 1 to 16 */
.phy_type = 1, /* 1- UTMI+ Phy */
.phy_utmi_width = 8, /* 8 bits */
.phy_ulpi_ddr = 0, /* Single */
.phy_ulpi_ext_vbus = 0,
.i2c_enable = 0,
.ulpi_fs_ls = 0, /* 0 - No (default) */
.host_support_fs_ls_low_power = 0, /* 0 - Don't support low power mode (default) */
.host_ls_low_power_phy_clk = 0, /* 1 - 48 MHz default when phy_type is UTMI+ or ULPI*/
.ts_dline = 0, /* 0 - No (default) */
.reload_ctl = 0, /* 0 - No (default for core < 2.92a) */
.ahbcfg = 0x7, /* INCR16 */
.uframe_sched = 1, /* True to enable microframe scheduler */
.external_id_pin_ctl = -1,
.hibernation = -1,
};
static int rkdwc2_match(device_t, struct cfdata *, void *);
static void rkdwc2_attach(device_t, device_t, void *);
static void rkdwc2_deferred(device_t);
CFATTACH_DECL_NEW(rkdwctwo, sizeof(struct rkdwc2_softc),
rkdwc2_match, rkdwc2_attach, NULL, NULL);
/* ARGSUSED */
static int
rkdwc2_match(device_t parent, struct cfdata *match, void *aux)
{
#if 0
struct obio_attach_args *obio = aux;
if (strcmp(obio->obio_name, "dwctwo") != 0)
return 0;
#endif
return 1;
}
/* ARGSUSED */
static void
rkdwc2_attach(device_t parent, device_t self, void *aux)
{
struct rkdwc2_softc *sc = device_private(self);
struct obio_attach_args *obio = aux;
sc->sc_dwc2.sc_dev = self;
sc->sc_dwc2.sc_iot = obio->obio_bst;
sc->sc_dwc2.sc_bus.dmatag = obio->obio_dmat;
sc->sc_dwc2.sc_params = &rkdwc2_params;
bus_space_subregion(obio->obio_bst, obio->obio_bsh, obio->obio_offset,
obio->obio_size, &sc->sc_dwc2.sc_ioh);
aprint_naive(": USB controller\n");
aprint_normal(": USB controller\n");
sc->sc_ih = intr_establish(obio->obio_intr, IPL_VM,
IST_LEVEL | IST_MPSAFE, dwc2_intr, &sc->sc_dwc2);
#if 0
IST_EDGE, dwc2_intr, &sc->sc_dwc2);
#endif
if (sc->sc_ih == NULL) {
aprint_error_dev(self, "failed to establish interrupt %d\n",
obio->obio_intr);
goto fail;
}
config_defer(self, rkdwc2_deferred);
return;
fail:
if (sc->sc_ih) {
intr_disestablish(sc->sc_ih);
sc->sc_ih = NULL;
}
}
static void
rkdwc2_deferred(device_t self)
{
struct rkdwc2_softc *sc = device_private(self);
int error;
error = dwc2_init(&sc->sc_dwc2);
if (error != 0) {
aprint_error_dev(self, "couldn't initialize host, error=%d\n",
error);
return;
}
sc->sc_dwc2.sc_child = config_found(sc->sc_dwc2.sc_dev,
&sc->sc_dwc2.sc_bus, usbctlprint);
}