6153 lines
191 KiB
Plaintext
6153 lines
191 KiB
Plaintext
2001-08-01 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.1.0
|
|
|
|
2001-07-27 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_oncore.c (oncore_start): Set pps_enable=1, just
|
|
like the atom driver does.
|
|
From: reg@dwf.com
|
|
|
|
* ntpd/refclock_nmea.c (nmea_ppsapi): Set pps_enable=1, just like
|
|
the atom driver does.
|
|
From: Scott Allendorf <sca@newton.physics.uiowa.edu>
|
|
|
|
* ntpd/ntp_config.c (getconfig): CONF_CLOCK_PANIC was using the
|
|
wrong config flag.
|
|
From: <justin_forrester@hp.com>
|
|
|
|
2001-07-10 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99m-rc3
|
|
|
|
2001-07-06 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntp_update: COPYRIGHT needs a touch.
|
|
From: Mike Stump <mrs@kithrup.com>
|
|
|
|
2001-07-04 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* html/config.htm: Major cleanup.
|
|
From: Martin Janzen <janzen@pixelmetrix.com>
|
|
|
|
* configure.in (rt library check): Don't look for -lrt under
|
|
Linux. Under glibc-2.1.2 and -2.2.2 (at least), the POSIX-
|
|
compatibility real-time library does strange things with threads
|
|
as other processes and we're getting lots of complaints about it.
|
|
Reported by: Juha Sarlin <juha@c3l.com>
|
|
|
|
2001-06-30 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* html/driver35.htm: Update email address.
|
|
|
|
2001-06-25 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_oncore.c (oncore_msg_BaEaHa): Fix wrong offset for
|
|
rsm.bad_almanac
|
|
From: Reynir Siik <reynir@royal.net>
|
|
|
|
2001-06-12 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99m-rc2
|
|
|
|
2001-06-10 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_config.c:
|
|
* include/ntp_config.h: includefile config keyword support
|
|
From: Dean Gibson <timekeeper@tcp-udp.net>
|
|
|
|
2001-06-08 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99m-rc1b
|
|
|
|
* ntpd/refclock_true.c (true_debug): Bump some buffer sizes to
|
|
reduce/eliminate chance of buffer overflow. Use snprintf()
|
|
instead of sprintf(). Do a better job of opening the debug file.
|
|
* ntpd/ntp_control.c (ctl_getitem): Count overflow packets as bad
|
|
and return a BADFMT.
|
|
* ntpd/ntp_config.c (save_resolve): call fdopen() with the correct
|
|
mode.
|
|
From: Bela Lubkin <belal@sco.com>
|
|
|
|
2001-06-03 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* include/ntp.h (RES_ALLFLAGS): Add RES_DEMOBILIZE.
|
|
From: Dean Gibson <timekeeper@tcp-udp.net>
|
|
|
|
* configure.in: 4.0.99m-rc1a
|
|
|
|
2001-06-02 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_refclock.c (refclock_open): Add O_NOCTTY to the open()
|
|
flags when opening a serial port.
|
|
Reported by: joseph lang <tcnojl1@earthlink.net>
|
|
|
|
2001-05-31 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* html/notes.htm: Typo fix.
|
|
From: John Stone <johns@ks.uiuc.edu>
|
|
|
|
* configure.in: 4.0.99m-rc1
|
|
|
|
* html/monopt.htm: Typo fix.
|
|
* html/confopt.htm: Cruft removal.
|
|
From: John Stone <johns@ks.uiuc.edu>
|
|
|
|
2001-05-30 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* README.cvs: More updates and cleanup.
|
|
|
|
* ntpd/ntp_loopfilter.c (loop_config):
|
|
Check against STA_NANO instead of (NTP_API > 3) to catch kernels
|
|
that were rolled while the spec was evolving.
|
|
From: John.Hay@icomtek.csir.co.za
|
|
|
|
* README.cvs: Note that we want to check out NTP into a clean
|
|
subdir.
|
|
Reported by jrd@cc.usu.edu (Joe Doupnik)
|
|
|
|
2001-05-27 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k40
|
|
|
|
* include/ntp_refclock.h: Median Filter (SAMPLE - macro) - change
|
|
to use most recent MAXSTAGE entries when the filter overflows (ie
|
|
driver poking say once per second with poll > MAXSTAGE) rather
|
|
than blocking after MAXSTAGE entries (turf oldest rather than turf
|
|
most recent).
|
|
From: John Woolner <vk1et@tpg.com.au>
|
|
|
|
* ntpd/refclock_true.c:
|
|
a. Don't cream pp->a_lastcode when we get a <cr><lf> pair
|
|
b. Fix up pp->leap handling to work correctly
|
|
c. clear CEVNT_BADTIME etc warnings when we get good clock
|
|
CEVNT_NOMINAL.
|
|
From: John Woolner <vk1et@tpg.com.au>
|
|
|
|
* kernel/sys/pcl720.h:
|
|
Add support for the XL clock to refclock_true.c
|
|
From: Paul A Vixie <vixie@mfnx.net>
|
|
|
|
* ntpd/ntp_loopfilter.c (local_clock): One more attempt at
|
|
"improving" the panic message.
|
|
|
|
2001-05-26 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (ac_cv_func_ctty_for_f_setown): BSDI3 needs a ctty
|
|
for F_SETOWN, too.
|
|
From: Paul A Vixie <vixie@mfnx.net>
|
|
|
|
2001-05-24 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* html/ntpd.htm: Typo.
|
|
From: John Stone <johns@ks.uiuc.edu>
|
|
|
|
2001-05-23 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k39
|
|
|
|
* ntpd/ntp_loopfilter.c (local_clock): huffpuff cleanup/improvements.
|
|
(huffpuff): Cleanup/improvements.
|
|
(loop_config): huffpuff initialization cleanup/improvements.
|
|
From: Dave Mills, Terje, Mark, and John?
|
|
|
|
2001-05-22 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* html/release.htm:
|
|
* html/ntpd.htm:
|
|
* html/miscopt.htm:
|
|
From: Dave Mills: Updates.
|
|
|
|
2001-05-21 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k38
|
|
|
|
* ntpd/ntp_proto.c (clock_filter): Huff-n-Puff and Popcorn
|
|
improvements.
|
|
* ntpd/ntp_loopfilter.c (local_clock): Debug cleanup
|
|
From: Dave Mills.
|
|
|
|
* include/ntp_syscall.h (ntp_gettime): Updated patch from Ulrich.
|
|
My original attempt was not backwards compatible.
|
|
|
|
2001-05-17 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* include/ntp_syscall.h (ntp_gettime): Fill in the tai member.
|
|
From: Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>
|
|
|
|
* configure.in: 4.0.99k37
|
|
|
|
* ntpd/ntp_proto.c (clock_filter): Lose "off", xtemp and ytemp,
|
|
and some obsoleted calculations. Set the peer->offset and
|
|
peer->delay from the filter stages.
|
|
|
|
* ntpd/ntp_loopfilter.c: Comment/document improvements.
|
|
(local_clock): correct the offset by one-half the difference
|
|
between the sample delay and minimum delay. Lose "mu" from the
|
|
debug message.
|
|
From: Dave Mills.
|
|
|
|
2001-05-15 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k36
|
|
|
|
* ntpd/ntp_loopfilter.c: Huff-n-puff cleanup
|
|
From: Dave Mills.
|
|
|
|
2001-05-14 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k35
|
|
|
|
* ntpd/refclock_atom.c (atom_ppsapi): set pps_enable=1 if
|
|
enb_hardpps.
|
|
* ntpd/ntp_timer.c: huffpuff support.
|
|
(init_timer): huffpuff support.
|
|
(timer): huffpuff support.
|
|
* ntpd/ntp_proto.c (init_proto): Initialize pps_enable to 0, not 1.
|
|
* ntpd/ntp_loopfilter.c (CLOCK_HUFFPUFF): Added.
|
|
Add huff-n-puff filter variables.
|
|
(local_clock): Lose "pps sync enabled" log noise.
|
|
(huffpuff): Added.
|
|
(loop_config): LOOP_MINPOLL and LOOP_ALLAN were missing the
|
|
trailing break; add LOOP_HUFFPUFF.
|
|
* ntpd/ntp_config.c: tinker huffpuff added.
|
|
(getconfig): CONF_CLOCK_HUFFPUFF support.
|
|
* include/ntpd.h: huffpuff() declaration.
|
|
* include/ntp_config.h (CONF_CLOCK_HUFFPUFF): Added.
|
|
* include/ntp.h (HUFFPUFF): Added.
|
|
(LOOP_HUFFPUFF): Added.
|
|
From: Dave Mills.
|
|
|
|
2001-05-11 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* html/driver20.htm: Reality check.
|
|
* ntpd/refclock_nmea.c: Comment cleanup
|
|
From: John Woolner <vk1et@tpg.com.au>
|
|
|
|
* html/release.htm: Cleanup (at least).
|
|
* html/refclock.htm: Cleanup (at least).
|
|
* html/kern.htm: Cleanup (at least).
|
|
* html/index.htm: Cleanup (at least).
|
|
* html/extern.htm: Cleanup (at least).
|
|
* html/driver1.htm: Cleanup (at least).
|
|
* html/debug.htm: Cleanp (at least).
|
|
* html/accopt.htm: KoD documentation update.
|
|
From: Dave Mills.
|
|
|
|
* configure.in: 4.0.99k34
|
|
|
|
* ntpd/ntp_util.c (record_loop_stats): values are now passed in.
|
|
* ntpd/ntp_loopfilter.c (local_clock): pass the values to
|
|
record_loop_stats().
|
|
* include/ntpd.h: Pass the parameters in to record_loop_stats().
|
|
With the discipline loop opened (disable ntp) the local clock
|
|
updates were not being sent to loopstats. That now is.
|
|
From: Dave Mills.
|
|
|
|
2001-05-10 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k33
|
|
|
|
* ntpd/ntp_proto.c (receive): Validate the source port. Lose
|
|
NTPv1 support.
|
|
* ntpd/ntp_loopfilter.c (local_clock): Sanity check sys_poll
|
|
earlier instead of later.
|
|
From: Dave Mills.
|
|
|
|
* ntpd/refclock_oncore.c (oncore_msg_any): We don't always have
|
|
GETTIMEOFDAY().
|
|
|
|
2001-05-09 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_shm.c (shm_poll): Apply JAN_1970 correction after
|
|
calling TVTOTS(), just like everybody else does.
|
|
From: David Malone <dwmalone@maths.tcd.ie>
|
|
|
|
* ntpd/refclock_ulink.c: fixed 33x quality flag, added more
|
|
debugging stuff, updated 33x time code explanation.
|
|
From: s.l.smith (via j.c.lang).
|
|
|
|
2001-05-08 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k32
|
|
|
|
* ntpd/ntp_loopfilter.c: rstclock now takes a 3rd argument, the
|
|
last offset.
|
|
(init_loopfilter): Use it.
|
|
(local_clock): Use it. Clean up the code.
|
|
(loop_config): Use it.
|
|
(rstclock): Implement it. Clean up the code.
|
|
From Dave Mills.
|
|
|
|
2001-05-06 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k31
|
|
|
|
* ntpdc/ntpdc_ops.c (sysstats): That's 'bad packet format'
|
|
(instead of '... length'), and 'packets rejected' (instead of
|
|
'limitation rejects'.
|
|
* ntpd/ntp_proto.c (receive): PUBKEY fixes. Move KoD stuff to
|
|
process_packet().
|
|
(process_packet): Move KoD stuff here...
|
|
(peer_clear): Unspec the stratum, too.
|
|
(clock_filter): Don't update peer->epoch here. Fix the filter
|
|
test when checking the epoch.
|
|
(fast_xmit): Send back STRATUM_UNSPEC on a KoD packet.
|
|
(init_proto): Initialize sys_jitter.
|
|
|
|
* ntpd/ntp_loopfilter.c: rstclock() takes 2 parameters now.
|
|
(init_loopfilter): Use it...
|
|
(local_clock): Ditto, and change the "mu" calculation. Improve
|
|
the jitter test in S_SYNC. Use peer->epoch (not current_time) to
|
|
update the last_time. Update debug info.
|
|
(rstclock): 2nd arg - the epoch to use. Use it.
|
|
(loop_config): update call to rstclock.
|
|
From: Dave Mills.
|
|
|
|
2001-05-01 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ports/winnt/ntpd/ntpd.dsp: Add cmd_args.c
|
|
From: Wink Saville <wink@saville.com>
|
|
|
|
2001-04-29 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpq/ntpq.c (tstflags): 11 now.
|
|
From: John Cochran <jdc@fiawol.org>
|
|
|
|
* ntpd/ntp_proto.c (receive): KoD updates. Improve the comments.
|
|
Lose the AM_PROCPKT restrictions test.
|
|
(peer_xmit): Check/report on no encryption key in packet.
|
|
(fast_xmit): Use peer_xmit's new packet length check code.
|
|
From Dave Mills.
|
|
|
|
2001-04-28 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k30
|
|
|
|
2001-04-27 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpdc/ntpdc_ops.c: Added "kod", lost "demobilize".
|
|
* ntpd/ntp_config.c: Added "kod" keyword. Lose "demobilize" keyword.
|
|
* html/release.htm: Updated.
|
|
* html/accopt.htm: Updated.
|
|
From: Dave Mills.
|
|
|
|
* ntpq/ntpq.c: Reorder and add some TEST flag bits.
|
|
* ntpd/ntp_proto.c (transmit): Also bail if access denied.
|
|
(receive): Lose RES_DEMOBILIZE and (some?) RES_DONTSERVE and
|
|
RES_LIMITIED stuff. Update Kiss-Of-Death (KoD) docs.
|
|
Call fast_xmit with new 3rd parameter (restrict_mask).
|
|
Before checking for an authentic packet, check the restrict_mask
|
|
for RES_{DONTSERVE,LIMITED,NOPEER}.
|
|
Check restrictions in AM_PROCPKT case.
|
|
(peer_clear): Don't lose the stratum if the peer->flags don't
|
|
indicate FLAG_REFCLOCK.
|
|
(fast_xmit): Take restrict mask as a new argument, and handle
|
|
KoD. Reorder some code.
|
|
From: Dave Mills.
|
|
|
|
2001-04-26 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpdc/ntpdc_ops.c: restrict/unrestrict support for version and
|
|
demobilize. Implement demobilze.
|
|
* ntpd/ntp_proto.c (receive): Improve version testing, including
|
|
RES_DEMOBILIZE support.
|
|
(fast_xmit): Patches to kiss-of-death packet.
|
|
* ntpd/ntp_loopfilter.c (local_clock): S_SYNC case now also checks
|
|
abs(clock_offset) against CLOCK_PGATE*sys_jitter.
|
|
* ntpd/ntp_config.c: CONF_RES_DEMOBILIZE/demobilize support.
|
|
* include/ntp_config.h (CONF_RES_DEMOBILIZE): Added.
|
|
* include/ntp.h (RES_DEMOBILIZE): Added.
|
|
From Dave Mills.
|
|
|
|
2001-04-25 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* html/accopt.htm: Document the "version" parameter
|
|
From Dave Mills.
|
|
|
|
* ntpd/ntp_proto.c (fast_xmit): Implement DENY mode.
|
|
From Dave Mills.
|
|
|
|
* ntpd/ntp_config.c: Add the "allan" tinker variable.
|
|
From: Juha Sarlin <juha@c3l.tyreso.se>
|
|
|
|
* ntpd/refclock_hopfpci.c (hopfpci_start): Lose the "correct_any"
|
|
stuff - it's both obsolete and wrong.
|
|
|
|
* ntpd/ntp_proto.c (receive): Keep track of packet versions.
|
|
Implement RES_LIMITED.
|
|
* include/ntp_config.h (CONF_RES_LIMITED):
|
|
* include/ntp.h (RES_LIMITED): Leave the bits in the original
|
|
order.
|
|
From Dave Mills.
|
|
|
|
* util/timetrim.c:
|
|
* util/Makefile.am:
|
|
* ntpdc/ntpdc_ops.c:
|
|
* ntpd/refclock_nmea.c:
|
|
* libntp/snprintf.c:
|
|
* configure.in:
|
|
* configure:
|
|
* config.h.in:
|
|
* aclocal.m4:
|
|
* acconfig.h:
|
|
Lint cleanup from: Marc Brett <mbrett@rgs0.london.waii.com>
|
|
|
|
* ntpd/ntp_config.c: Add "version" support.
|
|
(getconfig): version support.
|
|
* include/ntp_config.h (CONF_RES_VERSION): Added.
|
|
* include/ntp.h (RES_VERSION): Added.
|
|
From: Dave Mills.
|
|
|
|
* include/ntp_machine.h (ifreq): WinNT cleanup
|
|
|
|
2001-04-23 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k29
|
|
|
|
* html/miscopt.htm: Document the "allan" tinker variable.
|
|
* ntpd/ntp_proto.c (clock_filter): Update comments. Lose etemp;
|
|
we now use allan_xpt for this.
|
|
* ntpd/ntp_loopfilter.c: Added allan_xpt as a tinker variable.
|
|
Reorganize variables and improve comments.
|
|
(local_clock): Improve comments, use (new) allan_xpt instead of
|
|
CLOCK_ALLAN. Fix test in S_SYNC state. Update debug info.
|
|
(rstclock): No longer force allan_xpt to CVLOCK_ALLAN in S_FREQ,
|
|
S_SYNC, or default case.
|
|
(loop_config): Document dangerous tinker variables, and add
|
|
LOOP_ALLAN to the list.
|
|
* include/ntp_config.h (CONF_CLOCK_ALLAN): Added.
|
|
* include/ntp.h (LOOP_ALLAN): Added.
|
|
Allan intercept fixes from Dave Mills.
|
|
|
|
* scripts/mkver.in: Use the C locale so the dates come out in a
|
|
consistent format.
|
|
From: ASANO Naoyuki <n_asano@imjp.co.jp>
|
|
|
|
* build: Run "config.status" before the "make" because it probably
|
|
saves time and trouble. Probably...
|
|
|
|
* flock-build: Try building sequentially.
|
|
|
|
2001-04-22 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (ac_cv_make_tickadj): Fix it right...
|
|
|
|
* util/ntp-genkeys.c: extern config_netinfo, too.
|
|
|
|
* util/hist.c:
|
|
* ntptrace/ntptrace.c:
|
|
* ntpq/ntpq.c:
|
|
* ntpdc/ntpdc.c:
|
|
* ntpdate/ntptimeset.c:
|
|
* ntpdate/ntpdate.c:
|
|
* ntpd/refclock_parse.c:
|
|
* ntpd/refclock_msfees.c:
|
|
* ntpd/refclock_jupiter.c:
|
|
* ntpd/ntp_refclock.c:
|
|
* ntpd/ntp_io.c:
|
|
* libparse/clk_wharton.c:
|
|
* libparse/clk_varitext.c:
|
|
* libparse/clk_trimtaip.c:
|
|
* libparse/clk_schmid.c:
|
|
* libparse/clk_rcc8000.c:
|
|
* libparse/clk_rawdcf.c:
|
|
* libparse/clk_meinberg.c:
|
|
* libparse/clk_hopf6021.c:
|
|
* libparse/clk_dcf7000.c:
|
|
* libparse/clk_computime.c:
|
|
Lint. From: Simon Burge <simonb@wasabisystems.com>
|
|
|
|
2001-04-21 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_nmea.c (nmea_receive): Fixes.
|
|
From: John Woolner <vk1et@tpg.com.au>
|
|
|
|
* util/ntp-genkeys.c: Declare check_netinfo, don't define it.
|
|
From: Jack Bryans <jbryans@csulb.edu>
|
|
|
|
* configure.in (RSASRCS): rsaref2 needs digit.h (I thought I fixed
|
|
this already).
|
|
|
|
* configure.in (CFLAGS): Disable -Wconversion, enable
|
|
-Wmissing-prototypes, and allow for -Werror.
|
|
From: Simon Burge <simonb@wasabisystems.com>
|
|
|
|
* util/ntp-genkeys.c (main): Reset the standard mask so the
|
|
symlinks are created with the standard mask.
|
|
|
|
* configure.in: 4.0.99k28
|
|
|
|
* ntpd/ntpd.c (ntpdmain): Use mode_t for umask value.
|
|
|
|
* util/ntp-genkeys.c: Create files with the right umask.
|
|
|
|
* util/ntp-genkeys.c: config_file should be declared, not defined.
|
|
* ntpd/refclock_mx4200.c (mx4200_pps): debug cleanup.
|
|
* ntpd/refclock_hopfser.c: If we're not using it, provide the _bs.
|
|
* ntpd/refclock_heath.c (heath_receive): Add missing "break"
|
|
statements.
|
|
* ntpd/ntp_proto.c: Lose extra definition of mode_ntpdate.
|
|
* librsaref/Makefile.am (nodist_librsaref_a_SOURCES): Put RSASRCS
|
|
on the same line as rsaref.h to improve portability.
|
|
* libntp/msyslog.c: Lint cleanup.
|
|
From: Marc.Brett@westerngeco.com
|
|
|
|
* util/ntp-genkeys.c:
|
|
* ntpdate/ntpdate.c:
|
|
* ntpd/ntp_config.c: Netinfo header reorder.
|
|
From: Jack Bryans <jbryans@csulb.edu>
|
|
|
|
* configure.in: timespec can be found by looking in goofy places
|
|
under SunOS.
|
|
|
|
2001-04-20 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_nmea.c: PPSAPI cleanup, default to RMC sentences,
|
|
handle milliseconds, multiple sentences, other good stuff.
|
|
From: John Woolner <vk1et@tpg.com.au>, Marc.Brett@westerngeco.com,
|
|
John.Hay@icomtek.csir.co.za
|
|
|
|
* ntpd/ntp_proto.c (receive): In the AM_NEWBCL case, return in all
|
|
cases at the end.
|
|
* ntpd/ntp_peer.c (newpeer): Check cast_flags against MDF_BCLNT,
|
|
not against MDF_BCAST.
|
|
* ntpd/ntp_loopfilter.c (local_clock): Lose debug info.
|
|
* ntpd/ntp_crypto.c (crypto_recv): Bugfix.
|
|
From: Dave Mills.
|
|
|
|
* configure.in: 4.0.99k27
|
|
|
|
* ntpd/ntp_loopfilter.c (local_clock): Check clock_panic > 0.
|
|
Check clock_max > 0.
|
|
* html/ntpd.htm: Cleanup.
|
|
* html/miscopt.htm: Cleanup.
|
|
* html/confopt.htm: Cleanup minpoll documentation.
|
|
From: Dave Mills.
|
|
|
|
2001-04-19 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/cmd_args.c (getstartup): check_netinfo needs an extern
|
|
declaration.
|
|
Reported by: Jack Bryans <jbryans@csulb.edu>
|
|
|
|
* configure.in (ac_cv_make_timetrim): Added.
|
|
* util/Makefile.am (bin_PROGRAMS): MAKE_TIMETRIM
|
|
Requested by: Jack Bryans <jbryans@csulb.edu>
|
|
|
|
* configure.in: 4.0.99k26
|
|
|
|
* util/ntp-genkeys.c:
|
|
* ntpd/refclock_oncore.c:
|
|
* ntpd/ntp_peer.c:
|
|
* libntp/msyslog.c:
|
|
* libntp/audio.c:
|
|
Lint cleanup.
|
|
From: Simon Burge <simonb@wasabisystems.com>
|
|
|
|
* ntpd/ntp_loopfilter.c (local_clock): debug message improvements
|
|
from Dave Mills.
|
|
|
|
* libntp/emalloc.c (emalloc): Tell people we are exiting if we log
|
|
an out-of-memory condition.
|
|
|
|
* util/ntp-genkeys.c (main): Don't allow '#' in a generated MD5
|
|
key. Reported by: Dave Tyson <Dave.Tyson@liverpool.ac.uk>
|
|
|
|
2001-04-18 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_proto.c (clock_update): minpoll cleanup.
|
|
(clock_select): minpoll cleanup.
|
|
(clock_filter): Bugfixes from Mark Martinec <Mark.Martinec@ijs.si>
|
|
* ntpd/ntp_loopfilter.c (rstclock): minpoll cleanup. Debug cleanup.
|
|
* ntpd/ntp_config.c (getconfig): Initialize/bounds check minpoll
|
|
using NTP_MINDPOLL insted of sys_minpoll.
|
|
From: Dave Mills.
|
|
|
|
2001-04-17 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* libntp/msyslog.c:
|
|
* ElectricFence/page.c (stringErrorReport): Follow Rainer's lead
|
|
and use strerror().
|
|
|
|
* ntpd/refclock_shm.c (shm_start): Always use strerror.
|
|
* libntp/msyslog.c (msyslog): Use strerror if present.
|
|
From: Rainer Orth <ro@TechFak.Uni-Bielefeld.
|
|
|
|
* ntpd/ntp_config.c (getconfig): Read stratum fudge value into
|
|
long variable.
|
|
From: Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
* libparse/parsesolaris.c (rdchar): Cast ~0 to unsigned long.
|
|
* libntp/buftvtots.c (buftvtots): Allow for 8-byte tv_sec, tv_usec
|
|
in struct timeval.
|
|
From: Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
2001-04-16 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_config.c (getconfig): move "tinker" so it's generally
|
|
available.
|
|
|
|
2001-04-15 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: Look for getclock().
|
|
|
|
* ntpd/ntp_config.c (getconfig): Squawk if provided minpoll or
|
|
maxpoll values are out of range.
|
|
|
|
* ntpd/ntp_proto.c (poll_update): Some operations can only be done
|
|
if we're compiling with some REFCLOCKs.
|
|
From Dave Mills.
|
|
|
|
* configure.in (RSASRCS): Added.
|
|
* librsaref/Makefile.am (nodist_librsaref_a_SOURCES): Use RSASRCS.
|
|
|
|
* configure.in: Limit the DECL_HSTRERROR_0 to aix4.3.*. RSN, we
|
|
could also limit it to xlc...
|
|
|
|
* configure.in: 4.0.99k25
|
|
|
|
* html/leap.htm: Added.
|
|
* html/index.htm: Update.
|
|
* html/driver7.htm: Update.
|
|
* html/driver6.htm: Update.
|
|
* html/driver36.htm: Update.
|
|
* html/audio.htm: Update.
|
|
* html/y2k.htm: Removed.
|
|
From Dave Mills.
|
|
|
|
2001-04-14 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* acconfig.h: Lose extra declarations of PACKAGE and VERSION.
|
|
|
|
* acconfig.h:
|
|
* configure.in:
|
|
* include/l_stdlib.h: DECL_HSTRERROR_0 needed for xlc under AIX 4.3.2.
|
|
Reported by: Harald Barth <haba@pdc.kth.se>
|
|
|
|
* ntpd/ntp_proto.c (proto_config): cal_enable (PROTO_CAL) is
|
|
invalid if no refclocks are present.
|
|
From: Frodo Looijaard <frodol@dds.nl>
|
|
|
|
* README.cvs: On some systems, the -C option fails.
|
|
|
|
* ntpd/refclock_nmea.c:
|
|
* ntpd/ntp_refclock.c:
|
|
* html/driver20.htm:
|
|
PPSAPI patches for NMEA driver.
|
|
From: John.Hay@icomtek.csir.co.za
|
|
|
|
* README.rsa: Describe RSAEuro support, provide alternate rsa.c
|
|
patch.
|
|
* configure.in: Check for rsaeuro1, RSAOBJS, RSADIR respectively.
|
|
* html/build.htm: Hint at rsaeuro1 directory.
|
|
* include/global.h (BYTE): Define.
|
|
* librsaref/Makefile.am (nodist_librsaref_a_SOURCES): Removed rsaref2
|
|
specific sources.
|
|
(librsaref_a_LIBADD): Add appropriate objects.
|
|
(librsaref_a_DEPENDENCIES): Work around automake limitation.
|
|
(stamp-rsaref): Use RSADIR.
|
|
* scripts/README: Document ntp-close.
|
|
* scripts/Makefile.am (EXTRA_DIST): Distribute it.
|
|
* Makefile.am (DISTCLEANFILES): Remove .warning.
|
|
* librsaref/Makefile.am (DISTCLEANFILES): Remove copied/touched
|
|
librsaref sources, stamp-rsaref.
|
|
* ntpdate/Makefile.am (DISTCLEANFILES): Remove version.c.
|
|
* ntpq/Makefile.am (DISTCLEANFILES): Likewise.
|
|
* parseutil/Makefile.am (DISTCLEANFILES): Remove $(EXTRA_PROGRAMS).
|
|
Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
* ntpd/ntp_control.c: Header cleanup
|
|
|
|
2001-04-13 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: Properly align --help output.
|
|
Explain ElectricFence.
|
|
From: Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
* ntpd/ntp_loopfilter.c (local_clock): Lose debugging statements.
|
|
* ntpd/ntp_proto.c (clock_filter): Rewrite.
|
|
From: Dave Mills
|
|
|
|
* ntpd/ntp_control.c (ctl_getitem): msyslog() possible buffer
|
|
overflow exploit.
|
|
|
|
* configure.in: 4.0.99k24
|
|
|
|
* html/pic/radio2.jpg:
|
|
* html/release.htm:
|
|
* html/refclock.htm:
|
|
* html/pps.htm:
|
|
* html/ntpd.htm:
|
|
* html/miscopt.htm:
|
|
* html/driver22.htm:
|
|
* html/confopt.htm:
|
|
Updated documentation from Dave Mills.
|
|
|
|
* util/ntp-genkeys.c: sys_minpoll.
|
|
* ntpd/refclock_atom.c: Comment additions.
|
|
* ntpd/ntp_proto.c: mode_ntpdate and peer_ntpdate added.
|
|
(transmit): We want 3, not 2, consecutive polls. hpoll logic
|
|
cleanup. mode_ntpdate changes.
|
|
(receive): When setting up a newpeer, use our sys_minpoll, not the
|
|
peer->ppoll.
|
|
(clock_update): sys_minpoll changes. Reorder some case 1 code.
|
|
Don't exit in case 2.
|
|
(poll_update): hpoll cleanup.
|
|
(peer_clear): u_rand. Use u_rand to randomize the initial poll.
|
|
* ntpd/ntp_peer.c (newpeer): Bump peer_ntpdate if we're in
|
|
mode_ntpdate.
|
|
* ntpd/ntp_loopfilter.c: Initialize sys_poll and sys_minpoll to
|
|
NTP_MINDPOLL.
|
|
(local_clock): Clean up some debug/info messages.
|
|
(rstclock): Use sys_minpoll.
|
|
(loop_config): KERNEL_PLL sanity checks. LOOP_MINPOLL support.
|
|
* ntpd/ntp_crypto.c (crypto_recv): Turn off FLAG_AUTOKEY when we
|
|
turn off TEST10.
|
|
* ntpd/ntp_control.c (ctl_getitem): Buffer overflow check. Clean
|
|
up some loop logic.
|
|
* ntpd/ntp_config.c: Added "tinker" and "minpoll". Use
|
|
sys_minpoll now, instead of old manifest constant.
|
|
(save_resolve): Print keyid using decimal, not hex. From Lars-Owe
|
|
Ivarsson <larsowe@paradisaea.its.uu.se>
|
|
* include/ntpd.h: Added peer_ntpdate and sys_minpoll.
|
|
* include/ntp_config.h (CONF_CLOCK_MINPOLL): Added.
|
|
* include/ntp.h: keyid cleanup. LOOP_* cleanup.
|
|
From Dave Mills.
|
|
|
|
2001-04-03 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_proto.c (clock_filter): Swell stuff.
|
|
From: Mark Martinec <Mark.Martinec@ijs.si>
|
|
|
|
* ports/winnt/ntpd/ntpd.dsp:
|
|
* ports/winnt/ntpd/hopf_PCI_io.c:
|
|
* ports/winnt/include/hopf_PCI_io.h:
|
|
* ports/winnt/include/config.h:
|
|
* ntpd/refclock_hopfser.c:
|
|
* ntpd/refclock_hopfpci.c:
|
|
* ntpd/refclock_conf.c:
|
|
* ntpd/ntp_control.c:
|
|
* ntpd/Makefile.am:
|
|
* libntp/clocktypes.c:
|
|
* include/ntp.h:
|
|
* include/hopf6039.h:
|
|
* include/Makefile.in:
|
|
* include/Makefile.am:
|
|
* html/pic/fg6039.jpg:
|
|
* html/refclock.htm:
|
|
* html/driver39.htm:
|
|
* html/driver38.htm:
|
|
* html/copyright.htm:
|
|
Updated Oncore dudes.
|
|
|
|
* configure.in:
|
|
HOPF drivers and documentation.
|
|
From: Bernd Altmeier <altmeier@atlsoft.de> (with some light
|
|
hacking from Harlan to clean up indentation and lose the // comments)
|
|
|
|
* ntpd/refclock_oncore.c:
|
|
* ntpd/refclock_conf.c: Make it go.
|
|
From: Reg Clemens <reg@dwf.com>
|
|
|
|
* configure.in (openssl): Publish and default to RSAREF; hide
|
|
openssl, and only use it if explicitly requested (at least until
|
|
we work with it).
|
|
|
|
2001-04-02 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* html/y2k.htm:
|
|
* html/tickadj.htm:
|
|
* html/release.htm:
|
|
* html/refclock.htm:
|
|
* html/quick.htm:
|
|
* html/pps.htm:
|
|
* html/ntptrace.htm:
|
|
* html/ntptime.htm:
|
|
* html/ntpq.htm:
|
|
* html/ntpdc.htm:
|
|
* html/ntpdate.htm:
|
|
* html/ntpd.htm:
|
|
* html/miscopt.htm:
|
|
* html/index.htm:
|
|
* html/genkeys.htm:
|
|
* html/exec.htm:
|
|
* html/driver7.htm:
|
|
* html/driver22.htm:
|
|
* html/copyright.htm:
|
|
* html/confopt.htm:
|
|
* html/build.htm:
|
|
* html/authopt.htm:
|
|
* html/assoc.htm:
|
|
Updates from Dave Mills.
|
|
|
|
2001-04-01 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (OPENSSL): Just use -lcrypto.
|
|
Reported by Dave Mills.
|
|
|
|
2001-03-31 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k20
|
|
|
|
* ntpd/refclock_heath.c: Add support for GC-1000 II.
|
|
From Dave Mills.
|
|
|
|
* ntpd/ntp_proto.c (transmit): Check peer->unreach.
|
|
(peer_clear): peer->outdate is a f(BURST_INTERVAL1), not
|
|
NTP_MINPOLL.
|
|
* ntpd/ntp_loopfilter.c (local_clock): mode_ntpdate stuff.
|
|
* ntpd/ntp_crypto.c: OpenSSL/RSAREF support.
|
|
* ntpd/cmd_args.c: Use -q, not -z, for mode_ntpdate.
|
|
(getstartup): nofork on mode_ntpdate. Usage update.
|
|
* include/ntp_crypto.h: OpenSSL/RSAREF support.
|
|
From: Dave Mills.
|
|
|
|
* configure.in (rsaref): Buglet.
|
|
|
|
2001-03-30 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_proto.c (clock_update): mode_ntpdate support.
|
|
* ntpd/ntp_loopfilter.c (local_clock): mode_ntpdate support.
|
|
* ntpd/cmd_args.c: Added -z (mode_ntpdate).
|
|
* include/ntpd.h: mode_ntpdate added.
|
|
* include/ntp_crypto.h: RSAREF/OPENSSL cleanup.
|
|
From: Dave Mills.
|
|
|
|
2001-03-29 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* config.h.in:
|
|
* aclocal.m4:
|
|
* configure.in: Prepare for OpenSSL support
|
|
|
|
2001-03-28 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* README.rsa: Note that RSAEURO will not work.
|
|
Reported by: pieter.delacourt@banksys.be
|
|
|
|
2001-03-25 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* include/ntp_if.h:
|
|
* include/ntp_machine.h:
|
|
* include/ntp_unixtime.h:
|
|
* libntp/humandate.c:
|
|
* libntp/iosignal.c:
|
|
* libntp/mktime.c:
|
|
* libntp/prettydate.c:
|
|
* libntp/systime.c:
|
|
* libntp/tvtoa.c:
|
|
* libntp/uglydate.c:
|
|
* libntp/utvtoa.c:
|
|
* libparse/clk_computime.c:
|
|
* libparse/clk_dcf7000.c:
|
|
* libparse/clk_hopf6021.c:
|
|
* libparse/clk_meinberg.c:
|
|
* libparse/clk_rawdcf.c:
|
|
* libparse/clk_rcc8000.c:
|
|
* libparse/clk_schmid.c:
|
|
* libparse/clk_trimtaip.c:
|
|
* libparse/clk_trimtsip.c:
|
|
* libparse/clk_varitext.c:
|
|
* libparse/parse.c:
|
|
* libparse/parse_conf.c:
|
|
* ntpd/check_y2k.c:
|
|
* ntpd/ntp_config.c:
|
|
* ntpd/ntp_control.c:
|
|
* ntpd/ntp_intres.c:
|
|
* ntpd/ntp_io.c:
|
|
* ntpd/ntp_loopfilter.c:
|
|
* ntpd/ntp_monitor.c:
|
|
* ntpd/ntp_proto.c:
|
|
* ntpd/ntp_refclock.c:
|
|
* ntpd/ntp_request.c:
|
|
* ntpd/ntp_resolver.c:
|
|
* ntpd/ntp_timer.c:
|
|
* ntpd/ntp_util.c:
|
|
* ntpd/ntpd.c:
|
|
* ntpd/refclock_acts.c:
|
|
* ntpd/refclock_arbiter.c:
|
|
* ntpd/refclock_arc.c:
|
|
* ntpd/refclock_as2201.c:
|
|
* ntpd/refclock_atom.c:
|
|
* ntpd/refclock_bancomm.c:
|
|
* ntpd/refclock_chronolog.c:
|
|
* ntpd/refclock_chu.c:
|
|
* ntpd/refclock_datum.c:
|
|
* ntpd/refclock_dumbclock.c:
|
|
* ntpd/refclock_fg.c:
|
|
* ntpd/refclock_gpsvme.c:
|
|
* ntpd/refclock_heath.c:
|
|
* ntpd/refclock_hpgps.c:
|
|
* ntpd/refclock_irig.c:
|
|
* ntpd/refclock_jupiter.c:
|
|
* ntpd/refclock_leitch.c:
|
|
* ntpd/refclock_local.c:
|
|
* ntpd/refclock_msfees.c:
|
|
* ntpd/refclock_mx4200.c:
|
|
* ntpd/refclock_nmea.c:
|
|
* ntpd/refclock_oncore.c:
|
|
* ntpd/refclock_pcf.c:
|
|
* ntpd/refclock_pst.c:
|
|
* ntpd/refclock_shm.c:
|
|
* ntpd/refclock_tpro.c:
|
|
* ntpd/refclock_trak.c:
|
|
* ntpd/refclock_true.c:
|
|
* ntpd/refclock_ulink.c:
|
|
* ntpd/refclock_usno.c:
|
|
* ntpd/refclock_wwv.c:
|
|
* ntpd/refclock_wwvb.c:
|
|
* ntpdate/ntpdate.c:
|
|
* ntpdate/ntptime_config.c:
|
|
* ntpdate/ntptimeset.c:
|
|
* ntpdc/ntpdc.c:
|
|
* ntpdc/ntpdc_ops.c:
|
|
* ntpq/ntpq.c:
|
|
* ntpq/ntpq_ops.c:
|
|
* ntptrace/ntptrace.c:
|
|
* parseutil/testdcf.c:
|
|
* util/hist.c:
|
|
* util/ntp-genkeys.c:
|
|
* util/ntptime.c:
|
|
* util/precision.c:
|
|
* util/tickadj.c:
|
|
time.h and sys/time.h cleanup.
|
|
|
|
2001-03-24 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: '99k19
|
|
|
|
* ntpd/refclock_atom.c (atom_ppsapi): PPS API RFC alignment patches.
|
|
From: Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>
|
|
|
|
* util/ntptime.c: MNT options
|
|
From: Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>
|
|
|
|
* ntpd/ntp_refclock.c (refclock_newpeer): Lose "extra" free().
|
|
From: Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>
|
|
|
|
* configure.in: 4.0.99k18 and auto* upgrade
|
|
|
|
2001-03-14 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpdc/ntpdc_ops.c (printpeer): No more "valid".
|
|
* ntpd/ntp_request.c (peer_info): No more "valid".
|
|
* ntpd/ntp_refclock.c (refclock_transmit): valid/hpoll cleanup.
|
|
* ntpd/ntp_proto.c (transmit): valid/hpoll and peer->ttl cleanup.
|
|
peer->valid/oreach cleanup.
|
|
(receive): Call newpeer() with the pkt->ppoll, not
|
|
NTP_MINDPOLL (in several places).
|
|
In AM_NEWPASS, if we have a NULL peer, return.
|
|
(poll_update): Added xpoll definition, fixed oldpoll definition.
|
|
Algorithmic improvements.
|
|
* ntpd/ntp_peer.c (newpeer): Better minpoll/maxpoll
|
|
initialization.
|
|
(resetmanycast): That's a poll_update() on an MDF_ACAST, not a
|
|
poll_clear().
|
|
* ntpd/ntp_crypto.c: include <fcntl.h>.
|
|
(crypto_recv): Leave the crypto_flags alone when wiggling the
|
|
peer-> stuff.
|
|
(crypto_cert): Make room for daddy. Do a real open() on the cert
|
|
file. Read the cert. Initial hack and slash. Better debug info.
|
|
* ntpd/ntp_control.c: CP_VALID now does "unreach".
|
|
(ctl_putpeer): Ditto.
|
|
* include/ntp_request.h: info_peer gets a placeholder for "valid".
|
|
* include/ntp_crypto.h (CRYPTO_FLAG_CERT): Comment update.
|
|
* include/ntp.h: Lose "valid" from struct peer.
|
|
From: Dave Mills.
|
|
|
|
2001-03-05 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_proto.c (transmit): hpoll calc logic cleanup.
|
|
(receive): New cert stuff.
|
|
(poll_update): Improvements.
|
|
(peer_clear): New cert stuff.
|
|
(peer_xmit): New cert stuff.
|
|
* ntpd/ntp_crypto.c: New cert stuff, documentation cleanup. Lose
|
|
extraneous poll_uopdate()s.
|
|
* ntpd/ntp_control.c: Deal with new cert stuff.
|
|
* ntpd/ntp_config.c (getconfig): Handle CONF_CRYPTO_CERT.
|
|
* include/ntp_crypto.h (CRYPTO_FLAG_CERT): Added.
|
|
(CRYPTO_CERT): Added.
|
|
(CRYPTO_CONF_CERT): Added.
|
|
Add declaration for struct value certif.
|
|
* include/ntp_control.h (CS_CERTIF): Added.
|
|
(CP_CERTIF): Added.
|
|
* include/ntp_config.h (CONF_CRYPTO_CERT): Added.
|
|
* include/ntp.h (TEST10,TEST11): New meaning. Add certif to
|
|
struct peer.
|
|
(FLAG_PROVEN): Added.
|
|
(MAX_EXT_LEN): Removed.
|
|
exten grew from 672/4 to 5000/4 for PUBKEY.
|
|
From: Dave Mills.
|
|
|
|
2001-03-03 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_proto.c (transmit): Documentation cleanup.
|
|
(receive): Watch for NULL peer->pubkey.ptr (TEST11).
|
|
(poll_update): peer->nextdate, not ->outdate. More cleanup around
|
|
the disabled PUBKEY chunk.
|
|
* ntpd/ntp_crypto.c (make_keylist): ltemp might be smaller than
|
|
sys_automax - check peer->kpoll, too. Other ltemp cleanup.
|
|
(crypto_recv): fstamp is a PUBKEY-only variable.
|
|
* include/ntp.h (NTP_AUTOMAX): 13, not 12.
|
|
From: Dave Mills.
|
|
|
|
2001-03-01 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_proto.c (transmit): hpoll cleanup. Call clock_select()
|
|
after calling poll_update, not before.
|
|
(receive): Call poll_update after crypto_recv if FLAG_SKEY.
|
|
(process_packet): Set peer->ppoll Later.
|
|
(poll_update): peer->hpoll sanity checking. Set peer->outdate,
|
|
not ->nextate, when burst > 0. MDF_ACAST cleanup.
|
|
(clock_select): Fix hpoll typo in call to poll_update().
|
|
* ntpd/ntp_crypto.c (crypto_xmit): tstamp's value is a function of
|
|
PUBKEY.
|
|
* include/ntp.h (clear_to_zero): #define value is a function of
|
|
AUTOKEY.
|
|
From: Dave Mills.
|
|
|
|
2001-02-28 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_proto.c (transmit): Documentation/code update.
|
|
(poll_update): Sanity check peer->hpoll. Improve debug info.
|
|
(peer_clear): Improve debug info. Turn off FLAG_ASSOC in addition
|
|
to FLAG_AUTOKEY.
|
|
(clock_select): peer->status is CTL_PST_SEL_DISTSYSPEER, and don't
|
|
call poll_update(). Make each entry in the peer_list a
|
|
CTL_PST_SEL_SELCAND sooner, too. Rework similar logic later on.
|
|
Change debug level on some info.
|
|
(peer_xmit): Check peer->flags using FLAG_ASSOC, not
|
|
CRYPTO_FLAG_AUTO in a couple places. Don't call poll_update() if
|
|
sendlen > LEN_PKT_NOMAC.
|
|
* ntpd/ntp_loopfilter.c (local_clock): Improve debug info.
|
|
Sanity-check sys_poll sooner.
|
|
* ntpd/ntp_crypto.c: New artwork.
|
|
(COOKIE_LEN,AUTOKEY_LEN,VALUE_LEN): New.
|
|
(make_keylist): More debug info. Use FLAG_ASSOC, not
|
|
CRYPTO_FLAG_ASSOC.
|
|
(crypto_recv): More debug info. Clean up/improve sanity checks on
|
|
CRYPTO_ASSOC and CRYPTO_RESP packets, and in other places.
|
|
(crypto_xmit): Clean up/improve sanity checks on CRYPTO_ASSOC and
|
|
CRYPTO_RESP packets. Use FLAG_ASSOC, not CRYPTO_FLAG_ASSOC. More
|
|
debug info.
|
|
* include/ntp.h (NTP_CANLOCK): Lose it.
|
|
(clear_to_zero): is now "assoc".
|
|
(FLAG_ASSOC): Added.
|
|
From: Dave Mills
|
|
|
|
2001-02-23 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpdate/ntpdate.h (NTP_MAXAGE): Added.
|
|
* ntpd/ntp_refclock.c (refclock_receive): Cleanup.
|
|
* ntpd/ntp_proto.c (transmit): Don't reset peer->ppoll in one case.
|
|
Update peer->hpoll based on CTL_PST_SEL_CORRECT, not FLAG_SYSPEER.
|
|
Don't update peer->ppoll based on MDF_[BM]CAST.
|
|
(peer_clear): ppoll is initialized to maxpoll.
|
|
(clock_select): call poll_update(peer->hpoll) earlier.
|
|
(peer_xmit): Call poll_update later.
|
|
* ntpd/ntp_peer.c (peer_config): Rework initial values of [hkp]poll.
|
|
* ntpd/ntp_loopfilter.c (CLOCK_PHI): Added. Deal with other
|
|
(allow_*) stuff. Treat Windows/NT the same as others regarding
|
|
panic steps. Deal with tinker stuff.
|
|
* ntpd/ntp_config.c: Tinker stuff.
|
|
* ntpd/cmd_args.c (getCmdOpts): -g now wiggles "allow_panic"
|
|
(renamed from "correct_any"). -x now wiggles "allow_step"
|
|
(renamed from "allow_step_backward").
|
|
* include/ntpd.h: Add tinker variables. Rename/rework variables
|
|
associated with "permission to step" and "permission to make a
|
|
panic correction"
|
|
* include/ntp_config.h (CONFIG_TINKER): Added.
|
|
(CONF_CLOCK_MAX): Tinker keyword
|
|
(CONF_CLOCK_PANIC): Tinker keyword
|
|
(CONF_CLOCK_PHI): Tinker keyword
|
|
(CONF_CLOCK_MINSTEP): Tinker keyword
|
|
* include/ntp.h (NTP_MINCLOCK): Tinker and other cleanup.
|
|
From: Dave Mills
|
|
|
|
2001-02-19 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_proto.c (transmit): Don't peer_clear() and reset
|
|
minpoll unconditionally; make sure the peer is configured.
|
|
(poll_update): When updating peer->ppoll, check on BCAST and
|
|
MCAST, not ACAST
|
|
(peer_clear): PUBKEY cleanup. Zero out the peer structure
|
|
earlier. Initialization cleanup/fixes.
|
|
(peer_xmit): CRYPTO_FLAG_AUTO is in peer->flags now.
|
|
(key_expire): Debug output.
|
|
* ntpd/ntp_peer.c (unpeer): PUBKEY cleanup.
|
|
(newpeer): peer variable setup cleanup.
|
|
* ntpd/ntp_crypto.c (make_keylist): Keep CRYPTO_FLAG_AUTO in
|
|
peer->flags, not crypto_flags.
|
|
(crypto_xmit): Ditto.
|
|
(crypto_recv): Fix up RV_TSP logic (several places).
|
|
* include/ntp.h (clear_to_zero): Moved...
|
|
From: Dave Mills.
|
|
|
|
2001-02-14 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_proto.c (peer_xmit): Crypto-related fixes
|
|
From Dave Mills.
|
|
|
|
* ntpd/ntp_crypto.c (crypto_recv): Allocate space for the trailing
|
|
NUL on the keystr.
|
|
|
|
2001-01-28 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k17
|
|
|
|
* ntpd/refclock_local.c (STRATUM): 3 -> 5
|
|
* ntpd/ntp_proto.c: sys_maxd -> sys_selerr, sys_epsil ->
|
|
sys_syserr. various cleanups and improvements.
|
|
From: Dave Mills.
|
|
|
|
2001-01-19 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k16
|
|
|
|
* config.h.in: Regenerated - became empty somehow.
|
|
Reported by John.Hay@icomtek.csir.co.za
|
|
|
|
* ntpd/ntp_proto.c (clock_select): Fix sdisp calculation.
|
|
From Dave Mills.
|
|
|
|
* util/ntp-genkeys.c:
|
|
* ntpd/refclock_chu.c:
|
|
* ntpd/refclock_atom.c:
|
|
* ntpd/ntpd.c:
|
|
* ntpd/ntp_loopfilter.c:
|
|
* ntpd/ntp_io.c:
|
|
* ntpd/cmd_args.c:
|
|
* libntp/audio.c:
|
|
* include/l_stdlib.h:
|
|
* html/copyright.htm:
|
|
Lint fixes (Thanks bunches!)
|
|
From: Marc.Brett@westerngeco.com
|
|
|
|
2001-01-18 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k15
|
|
|
|
* ntpd/ntp_proto.c (clock_select): Track error[] items sooner.
|
|
Typo grabbing the dtemp value and in the sdisp calculation.
|
|
From Dave Mills.
|
|
|
|
2001-01-17 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k14
|
|
|
|
* ntpd/ntp_proto.c: Change description of sys_rootdelay and
|
|
sys_rootdispersion.
|
|
(process_packet): Fix p_del test (bad distance).
|
|
(process_packet): Fix bad synch distance test.
|
|
(process_packet): Fix call to clock_filter (p_disp)
|
|
(clock_update): Fix sys_rootdelay calculation.
|
|
(clock_filter): Initialize jit to f(sys_precision)
|
|
(clock_filter): Update jit using distance[i] instead of
|
|
SQUARE(). peer->jitter uses dtemp instead of SQUARE().
|
|
(clock_filter): Updated CLOCK_SGATE checks. When printing debug
|
|
info, show jitter along with popcorn spike.
|
|
(clock_select): New sdisp calc.
|
|
(root_distance): New return value calc.
|
|
(peer_xmit): xpkt.rootdispersion value change.
|
|
* include/ntp.h (CLOCK_SGATE): Popcorn spike gate (Whoa, Molly!)
|
|
From Dave Mills.
|
|
|
|
2001-01-13 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* config.sub (Repository): Updated.
|
|
* config.guess (Repository): Updated.
|
|
|
|
* ntpd/ntp_loopfilter.c (local_clock): Just use sys_jitter in the
|
|
calculation for rootdispersion.
|
|
From Dave Mills.
|
|
|
|
2001-01-02 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_proto.c (transmit): Fix documentation. Set
|
|
peer->outdate and call poll_update in a new place. Sanity checks
|
|
in the MODE_BROADCAST case.
|
|
(clock_select): Track the old peer. Use the old peer in
|
|
subsequent checks, where appropriate. Clean up unpeer() logic.
|
|
From Dave Mills.
|
|
|
|
2001-01-01 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_chu.c: Start using HAVE_AUDIO.
|
|
* ntpd/ntp_proto.c (clock_select): If about to discard an
|
|
ephemeral association, do it only if not the system peer.
|
|
From Dave Mills.
|
|
|
|
* html/pic/wingdorothy.gif:
|
|
* html/pic/bustardfly.gif:
|
|
* html/pic/boom3a.gif:
|
|
* html/pic/tonea.gif:
|
|
* html/pic/stack1a.jpg:
|
|
* html/pic/pogoa.gif:
|
|
* html/pic/pogo8.gif:
|
|
* html/pic/pogo6.gif:
|
|
* html/pic/pogo5.gif:
|
|
* html/pic/pogo4.gif:
|
|
* html/pic/pogo3.gif:
|
|
* html/pic/pogo1.gif:
|
|
* html/pic/oz2.gif:
|
|
* html/pic/flatheads.gif:
|
|
* html/pic/boom4.gif:
|
|
* html/pic/boom3.gif:
|
|
* html/pic/appletree.gif:
|
|
* html/pic/alice51.gif:
|
|
* html/pic/alice44.gif:
|
|
* html/pic/alice35.gif:
|
|
* html/pic/alice31.gif:
|
|
* html/pic/alice15b.gif:
|
|
* html/pic/alice13.gif:
|
|
* html/pic/alice11.gif:
|
|
* html/release.htm:
|
|
* html/rdebug.htm:
|
|
* html/prefer.htm:
|
|
* html/porting.htm:
|
|
* html/ntptrace.htm:
|
|
* html/ntpq.htm:
|
|
* html/ntpdate.htm:
|
|
* html/monopt.htm:
|
|
* html/kernpps.htm:
|
|
* html/index.htm:
|
|
* html/hints.htm:
|
|
* html/gadget.htm:
|
|
* html/driver7.htm:
|
|
* html/copyright.htm:
|
|
* html/config.htm:
|
|
* html/build.htm:
|
|
* html/authopt.htm:
|
|
* html/assoc.htm:
|
|
* html/accopt.htm:
|
|
Cleanup from Dave Mills.
|
|
|
|
2000-12-30 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k13
|
|
|
|
* ntpd/refclock_wwv.c (wwv_start): Call audio_init with DEVICE_AUDIO.
|
|
* ntpd/refclock_irig.c (irig_start): Call audio_init with DEVICE_AUDIO.
|
|
* ntpd/refclock_chu.c: Documentation cleanup.
|
|
(DEVICE_AUDIO): Added.
|
|
(fd_audio): Added.
|
|
(chu_start): Separate audio from serial device.
|
|
(chu_receive): Rewrite - get data from serial or audio device as
|
|
appropriate.
|
|
(chu_audio_receive): Renamed (from chu_receive) to allow both
|
|
audio and serial capability.
|
|
(chu_serial_receive): Ditto.
|
|
(chu_decode): Do the Right Thing based on audio/serial data.
|
|
* ntpd/ntp_refclock.c (refclock_open): Check for failure using <0
|
|
instead of ==-1.
|
|
* libntp/audio.c: Header cleanup, and remove
|
|
HAVE_STRUCT_AUDIO_INFO_* related fields.
|
|
(audio_init): Func arg is device to attempt to open.
|
|
* include/audio.h (audio_init): Now takes a char * argument.
|
|
From Dave Mills.
|
|
|
|
* configure.in (ntp_refclock): HAVE_AUDIO added. Remove
|
|
HAVE_STRUCT_AUDIO_INFO_* stuff; Dave rewrote the audio stuff.
|
|
|
|
2000-12-28 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k12
|
|
|
|
2000-12-27 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* html/release.htm:
|
|
* html/patches.htm:
|
|
* html/measure.htm:
|
|
* html/confopt.htm:
|
|
* html/clockopt.htm:
|
|
* html/biblio.htm:
|
|
* html/authopt.htm:
|
|
* html/assoc.htm:
|
|
Updates from Dave Mills.
|
|
|
|
* include/ntp_crypto.h: Make sure crypto_flags is visible.
|
|
From Dave Mills.
|
|
|
|
2000-12-14 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_proto.c (process_packet): pleap/pstratum.
|
|
(peer_xmit): Use CRYPTO_FLAG_AUTO.
|
|
* ntpd/ntp_crypto.c (make_keylist): Use CRYPTO_FLAG_AUTO. Only
|
|
sign host name and timestamps if the clock is synched.
|
|
* include/ntp_crypto.h (CRYPTO_FLAG_AUTO): Added.
|
|
From: Dave Mills
|
|
|
|
2000-12-11 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_proto.c (transmit): Call clock_select in a few new
|
|
places. BURST/IBURST cleanup. Don't turn off FLAG_BURST at the
|
|
EOburst.
|
|
(receive): Set peer->unreach = 0 before we call process_packet().
|
|
(process_packet): ditto, before calling poll_update(). Lose some
|
|
debugging, MODE_BCLIENT/CLIENT cleanup.
|
|
(poll_update): Bump nextupdate on FLAG_REFCLOCK, not _REFCLOCK or
|
|
_IBURST.
|
|
(peer_clear): Don't set IBURST on MDF_BCLNT.
|
|
From: Dave Mills.
|
|
|
|
* ntpdate/ntpdate.c (alarming): Appease ansi2knr.
|
|
|
|
2000-12-10 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_control.c (ctl_putpeer): CP_TTL and CP_TTLMAX
|
|
MDF_ACAST and MDF_MCAST cleanup.
|
|
|
|
* ntpd/refclock_wwv.c (wwv_start): ttlmax/ttl cleanup.
|
|
* ntpd/refclock_usno.c (usno_timeout): ttlmax/ttl cleanup.
|
|
* ntpd/refclock_parse.c (CLK_REALTYPE): ttlmax/ttl cleanup.
|
|
* ntpd/refclock_chu.c (chu_start): ttlmax/ttl cleanup.
|
|
* ntpd/refclock_acts.c (acts_timeout): ttlmax/ttl cleanup.
|
|
* ntpd/ntp_refclock.c (refclock_newpeer): Don't do the
|
|
any_interface -> loopback_interface trick.
|
|
* ntpd/ntp_proto.c (transmit): Broadcast/manycast cleanup.
|
|
* ntpd/ntp_peer.c: Cleanup.
|
|
* ntpd/ntp_io.c: Cleanup.
|
|
* ntpd/ntp_crypto.c (crypto_recv): AUTOKEY based on BCLNT, not MCAST2.
|
|
* include/ntpd.h: Declare findbcastinter().
|
|
* include/ntp.h: struct peer's ttlmax is now max ttl/refclock
|
|
mode. ttl is now ttl for manycast mode.
|
|
(FLAG_MCAST): Reworked several FLAG_ bits.
|
|
From Dave Mills.
|
|
|
|
2000-12-05 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpq/ntpq.c: CP_TTLMAX support.
|
|
* ntpd/ntp_proto.c (transmit): MDF_ACAST ttl fixes.
|
|
* ntpd/ntp_peer.c (resetmanycast): Reset ttl if MDF_ACAST.
|
|
(peer_config): Save max ttl in ttlmax.
|
|
* ntpd/ntp_control.c: ttlmax support.
|
|
* include/ntp_control.h (CP_TTLMAX): Added.
|
|
* include/ntp.h: Added ttlmax to struct peer.
|
|
Dave Mills.
|
|
|
|
2000-12-03 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_proto.c (receive): That any_interface is now an
|
|
rbufp->dstadr.
|
|
Various other doc and code cleanup.
|
|
* ntpd/ntp_peer.c (findmanycastpeer): Fixes
|
|
From Dave Mills
|
|
|
|
2000-12-02 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_request.c (do_conf): call peer_config with
|
|
any_interface, not 0.
|
|
* ntpd/ntp_proto.c (transmit): Manycast cleanup
|
|
* ntpd/ntp_peer.c (findmanycastpeer): manycast cleanup
|
|
* ntpd/ntp_io.c (sendpkt): Only check ttl if we have a ttl
|
|
(findinterface): Cleanup
|
|
* ntpd/ntp_control.c: cleanup
|
|
* include/ntpd.h: Added resetmanycast.
|
|
* include/ntp_control.h (CP_TTL): disp -> ttl
|
|
* ntpq/ntpq.c: disp -> ttl
|
|
From Dave Mills
|
|
|
|
2000-11-26 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k11
|
|
|
|
* ntpd/ntp_proto.c (transmit):
|
|
* ntpd/ntp_peer.c:
|
|
* ntpd/ntp_io.c:
|
|
* ntpd/ntp_control.c (ctl_putpeer):
|
|
* ntpd/ntp_config.c (getconfig):
|
|
* include/ntpd.h: mcast/ucast interface cleanup.
|
|
From: Dave Mills
|
|
|
|
* include/ntp_request.h: Put data[] as MAXFILENAME+16. This will
|
|
fix the conf_peer requests again, but re-break compatibility with
|
|
old versions of the daemon. Sigh.
|
|
|
|
* util/ntp-genkeys.c (cleanlinks): Don't do it if nosymlinks.
|
|
|
|
2000-11-19 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_parse.c (rawdcf_init_1): make Linux happier with
|
|
some modem control stuff.
|
|
From: Wolfram Pienkoss <wp@bszh.de> (via Frank Kardel)
|
|
|
|
* ntpd/refclock_pcf.c (pcf_poll): isdst fix
|
|
From: Andreas Voegele <andreas.voegele@gmx.de>
|
|
|
|
2000-10-28 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k10
|
|
|
|
* ntpd/refclock_wwvb.c (wwvb_start): Cosmetic reorder.
|
|
* ntpd/refclock_atom.c (RANGEGATE): Cleanup. Add ASTAGE.
|
|
Add ppsparams to struct ppsunit.
|
|
(atom_start): Init peer->burst to ASTAGE.
|
|
(atom_shutdown): Multi-handle
|
|
(atom_pps): Multi-handle
|
|
(atom_pps): RANGEGATE cleanup
|
|
(atom_poll): Poll count cleanup. Error check cleanup. Burst cleanup.
|
|
* ntpd/ntp_refclock.c (refclock_transmit): Lose the pre-burst
|
|
check poll_update().
|
|
(refclock_sample): Fix the jitter calc.
|
|
(refclock_receive): Pass the jitter to the clock_filter().
|
|
|
|
* ntpd/ntp_proto.c (clock_update): If we lose sync, reset the poll
|
|
to NTP_MINDPOLL.
|
|
(poll_update): Poll wiggles. Make sure peer->nextdate is timely.
|
|
(clock_select): If we lose sync, reset the poll to NTP_MINDPOLL.
|
|
* ntpd/ntp_loopfilter.c (local_clock): Show the asocid in debug
|
|
output. popcorn debug message changes. Clamp the poll interval
|
|
if the system peer has changed. PPS wiggle changes.
|
|
From Dave Mills.
|
|
|
|
2000-10-16 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_pcf.c (pcf_start):
|
|
* html/driver35.htm:
|
|
The radio clock transmits 69 bits with a period of 2.5
|
|
milliseconds per bit. Thus the driver now sets the default
|
|
calibration offset to 0.1725 (69 * 2.5 = 172.5).
|
|
Its now possible to disable the check of the radio clock's
|
|
synchronisation status bit. Several users requested this option.
|
|
From: Andreas Voegele <andreas.voegele@gmx.de>
|
|
|
|
* html/refclock.htm:
|
|
* html/rdebug.htm:
|
|
* html/prefer.htm:
|
|
* html/pps.htm:
|
|
* html/ntpdc.htm:
|
|
* html/miscopt.htm:
|
|
* html/ldisc.htm:
|
|
* html/kern.htm:
|
|
* html/index.htm:
|
|
* html/exec.htm:
|
|
* html/driver22.htm:
|
|
* html/clockopt.htm:
|
|
Updates from Dave Mills
|
|
|
|
* ntpd/ntp_intres.c (request): Sanity check the size of the response
|
|
|
|
2000-10-15 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpq/ntpq_ops.c (dopeers): Dave didn't like the patch to show
|
|
the units on the times...
|
|
* ntpdc/ntpdc_ops.c (doset): SYS_FLAG_PPS cleanup
|
|
* ntpd/refclock_wwv.c (wwv_newchan): Update the peer refid if
|
|
we're talking to a stratum 0 source
|
|
* ntpd/refclock_trak.c: Needs PPS
|
|
* ntpd/refclock_oncore.c: Disable for now
|
|
* ntpd/refclock_mx4200.c: Needs PPSAPI, not PPS
|
|
Header cleanup. PPS interface cleanup.
|
|
Process sentences with a switch
|
|
Cleanup and sanity checks
|
|
* ntpd/refclock_datum.c: header cleanup, light body cleanup
|
|
* ntpd/refclock_conf.c: CLOCK_TRAK needs PPS
|
|
MX4200 needs PPSAPI, not PPS
|
|
Disable ONCORE for now
|
|
* ntpd/refclock_bancomm.c: Surgery
|
|
* ntpd/refclock_atom.c: Cleanup
|
|
(atom_control): added
|
|
(atom_ppsapi): added
|
|
* ntpd/ntp_request.c (setclr_flags): SYS_FLAG_PPS cleanup
|
|
* ntpd/ntp_refclock.c: stropts.h back in in TTYCLK and
|
|
HAVE_SYS_CLKDEFS_H
|
|
Get ntp_syscall if KERNEL_PLL
|
|
Define cal_enable
|
|
(refclock_receive): Cleanup
|
|
(refclock_control): sanity check procptr
|
|
* ntpd/ntp_proto.c (init_proto): pps_enable
|
|
(proto_config): Turn on/off PPS discipline
|
|
* ntpd/ntp_loopfilter.c: pps_enable
|
|
(local_clock): record_loop_stats() if !ntp_enable
|
|
(local_clock): Turn off PPS if it's not enabled
|
|
Other cleanup/fixes
|
|
* ntpd/ntp_config.c: pps and calibrate keywords. Initialize
|
|
pps_assert to 0, not 1 (swap assert/clear?)
|
|
* include/ntpd.h: We have pll_status if KERNEL_PLL
|
|
Added pps_enable and cal_enable
|
|
* include/ntp_request.h (SYS_FLAG_PPS): Renamed from
|
|
SYS_FLAG_AUTHENTICATE
|
|
* include/ntp.h (PROTO_PPS): Added
|
|
(PROTO_CAL): Added
|
|
From: Dave Mills
|
|
|
|
2000-09-23 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* include/ntp_refclock.h (stropts.h, sys/clkdefs.h): Harmful and
|
|
useless file include's turned off.
|
|
* libntp/iosignal.c (netinet/in.h, sys/sockio.h): Duplicate file
|
|
include's turned off.
|
|
* ntpd/ntp_refclock.c (ntp_tty.h): File included.
|
|
(refclock_open, refclock_ioctl): Use `TTY' from ntp_tty.h.
|
|
* ntpd/refclock_atom.c: Grab a few headers regardless; if we don't
|
|
CLOCK_ATOM we provide a stub pps_sample() routine so the WHARTON
|
|
can be compiled/used.
|
|
* ntpq/ntpq_ops.c (dopeers, doopeers): Print the units for
|
|
each column header.
|
|
Tue Sep 12 16:25:51 2000 Philippe De Muyter <phdm@macqel.be>
|
|
|
|
* ntpd/refclock_atom.c (atom_start): Lose "temp", because we now
|
|
initially either CAPTUREASSERT or CAPTURECLEAR.
|
|
(atom_pps): pps_info_t is our friend. Update comments to reflect
|
|
reality. DTRT with pps_info. Do some overflow checks.
|
|
From: Dave Mills.
|
|
|
|
2000-09-21 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: Much improved Solaris patch-level check for the
|
|
FLL bug test.
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
2000-09-19 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* include/Makefile.am (noinst_HEADERS): Added ntp_tty.h
|
|
Reported by Dave Mills
|
|
|
|
2000-09-16 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntptrace/ntptrace.c:
|
|
* ntpdate/ntptimeset.c (receive):
|
|
* ntpdate/ntpdate.c (receive):
|
|
STRATUM cleanup
|
|
* ntpd/refclock_atom.c (atom_poll): Autostratum. Lose the leap.
|
|
* ntpd/ntp_proto.c: sys_prefer
|
|
(process_packet): stratum cleanup
|
|
(clock_select): Autostratum the ATOM
|
|
* ntpd/ntp_loopfilter.c: pps_update/pps_stratum wiggle.
|
|
* include/ntpd.h: Lose pps_update, gain sys_prefer
|
|
* include/ntp.h: STRATUM variable cleanup
|
|
From Dave Mills
|
|
|
|
2000-09-13 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_oncore.c (oncore_get_timestamp): Print debug
|
|
messages being aware of HAVE_STRUCT_TIMESPEC.
|
|
|
|
* ntpd/refclock_atom.c: Have pps_params tag along in the ppsunit
|
|
structure, where it really belongs.
|
|
(atom_pps): Use PPS_CAPTURE{ASSERT,CLEAR}
|
|
From: Dave Mills.
|
|
|
|
2000-09-12 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (ac_cv_var_atom_ok): Cleanup ATOM/PPSAPI stuff...
|
|
|
|
* scripts/ntp-close: Find "close" ntp servers.
|
|
From: Neal McBurnett <neal@bcn.boulder.co.us>
|
|
|
|
* ntpd/refclock_conf.c:
|
|
* ntpd/refclock_oncore.c: Re-enabled oncore driver for HAVE_PPSAPI
|
|
case only.
|
|
|
|
2000-09-12 Philippe De Muyter <phdm@macqel.be>
|
|
|
|
* ntpd/refclock_parse.c (we400a_pollinfo): Useless variable removed.
|
|
[WHARTON slot]: Set NO_POLL, NO_INIT and NO_DATA; fix `fixed format'
|
|
and `offset' fields.
|
|
|
|
* include/ntp_tty.h: New file
|
|
* libntp/icom.c: Use it.
|
|
|
|
* ntp_update (UPDATE_OPTIONS): Use -d, too. Fix Pass 1 comment.
|
|
|
|
2000-09-12 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_oncore.c: shmem_fname added. oncore_init_shmem()
|
|
updated.
|
|
(oncore_start): Comment cleanup
|
|
(oncore_read_config): Move call to oncore_shmem_init()
|
|
(oncore_init_shmem): Prototype change
|
|
(oncore_init_shmem): Don't exit on errors
|
|
(oncore_msg_any): timespec/timeval cleanup
|
|
(oncore_msg_Cj_id): shmem_fname changes
|
|
(oncore_msg_BaEaHa): saw_At bugfix
|
|
(oncore_get_timestamp): Added current_mode/current_params. Commented.
|
|
Added time_pps_getcap() calls.
|
|
From: Reg Clemens <reg@dwf.com>
|
|
|
|
* ntpd/ntp_io.c (input_handler): Better recvfrom() error message
|
|
From: Dean Gibson <timekeeper@tcp-udp.net>
|
|
|
|
* ntpdc/ntpdc.c (passwd): Get them working again.
|
|
From: Benjamin Greenwald <beng@lcs.mit.edu>
|
|
|
|
2000-09-11 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_atom.c:
|
|
(atom_start):
|
|
* ntpd/ntp_refclock.c: Comment cleanup. PPS/PPSAPI cleanup
|
|
(refclock_open): PPS/PPSAPI cleanup
|
|
From: Dave Mills
|
|
|
|
* ntpd/refclock_oncore.c:
|
|
* ntpd/refclock_mx4200.c:
|
|
HAVE_TIMESPEC -> HAVE_STRUCT_TIMESPEC
|
|
|
|
* configure.in: ATOM requires struct timespec, not PPSAPI. Clean
|
|
up dependencies accordingly.
|
|
|
|
2000-09-09 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (ac_cv_var_atom_ok): Improve ATOM configure message
|
|
PARSE requires ATOM.
|
|
|
|
* ntpd/ntpd.c (set_process_priority): Clean up debug messages.
|
|
|
|
2000-09-07 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: ac_cv_atom_ok, depends on HAVE_PPSAPI.
|
|
I notice the PARSE clocks require ATOM. Could be interesting...
|
|
|
|
2000-09-06 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* Makefile.in (distdir): Seems to be a bug in an automake library
|
|
somewhere...
|
|
|
|
2000-09-05 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_loopfilter.c (loop_config): V3 API needs MOD_BITS when
|
|
initializing ntv.modes. Initialize ntv.{maxerror,esterror,status}
|
|
earlier. Clean up KERNEL_PLL code.
|
|
|
|
2000-09-04 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpq/ntpq.c: report offset as "offset", not "phase". Lose
|
|
compliance.
|
|
* ntpd/refclock_local.c (local_poll): variance -> jitter
|
|
* ntpd/refclock_chu.c (chu_major): Lose variance.
|
|
* ntpd/ntp_util.c (hourly_stats): sys_error -> sys_jitter
|
|
(record_loop_stats): ditto
|
|
* ntpd/ntp_request.c (peer_info): variance -> jitter
|
|
* ntpd/ntp_refclock.c (refclock_sample): variance -> jitter
|
|
(refclock_receive): variance -> jitter
|
|
* ntpd/ntp_proto.c (process_packet): variance -> jitter
|
|
(clock_filter): variance -> jitter
|
|
(clock_select): variance -> jitter
|
|
(root_distance): variance -> jitter
|
|
* ntpd/ntp_peer.c (newpeer): variance -> jitter
|
|
* ntpd/ntp_loopfilter.c: Cleanup pll_nano selection bogon.
|
|
Centralize the kernel API data.
|
|
(local_clock): Lose sys_error.
|
|
(loop_config): Code cleanup.
|
|
* ntpd/ntp_control.c: Call offset "offset" and not "phase". Lose
|
|
CS_COMPLIANCE. Deal with variance/jitter rename.
|
|
* include/ntp_refclock.h: Rename variance to jitter in struct
|
|
refclockproc.
|
|
* include/ntp_control.h (CS_COMPLIANCE): Lose it.
|
|
* include/ntp.h: Rename variance to jitter in struct peer.
|
|
From: Dave Mills
|
|
|
|
2000-09-01 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_atom.c: Use the new ppsunit. Cleanup and improve
|
|
documentation.
|
|
* ntpd/ntp_refclock.c (refclock_sample): Don't accumulate
|
|
variance.
|
|
From Dave Mills
|
|
|
|
2000-08-31 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* html/driver22.htm: Update the docs.
|
|
* ntpd/refclock_atom.c (atom_start): Open the device if it hasn't
|
|
been opened already.
|
|
(pps_sample): Make it more visible.
|
|
From Dave Mills.
|
|
|
|
* configure.in: 4.0.99k8
|
|
|
|
Revert to the older automake.
|
|
|
|
* configure.in: The PPSAPI headers use "inline", so require a STDC
|
|
compiler.
|
|
|
|
* ntpd/refclock_atom.c (atom_shutdown): Typo
|
|
From Dave Mills
|
|
|
|
* configure.in: Convert to autoconf-2.49
|
|
|
|
* ntpd/refclock_atom.c: Header cleanup Comment cleanup. Lose the
|
|
TTYCLK stuff. Convert to PPSAPI.
|
|
* ntpd/ntp_refclock.c (refclock_newpeer): Move refclock_unpeer().
|
|
From: Dave Mills
|
|
|
|
2000-08-29 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure: Fix the autoconf problem...
|
|
|
|
2000-08-20 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 99k7
|
|
|
|
* util/ntptime.c (main): Report TAI stuff
|
|
* ntpq/ntpq.c: CS_COMPLIANCE/CS_JITTER cleanup
|
|
* ntpd/ntp_loopfilter.c (local_clock): sys_error/sys_jitter cleanup.
|
|
kernel PPL cleanup.
|
|
* ntpd/ntp_crypto.c: Check NTP_API if we're doing KERNEL_PLL so we
|
|
can get the TAI stuff.
|
|
* ntpd/ntp_control.c: CS_COMPLIANCE now reports "error" instead of
|
|
"jitter". CS_JITTER now reports jitter.
|
|
* include/ntpd.h: Added sys_jitter
|
|
* include/ntp_control.h (CS_JITTER): Added
|
|
From: Dave Mills
|
|
|
|
* ntpd/cmd_args.c (getCmdOpts): Crack -N at pre-scan, as we do the
|
|
priority wiggle before the final scan.
|
|
From: Tom Smith <smith@cag.lkg.dec.com>
|
|
We might do better to move the priority wiggle to after the final
|
|
scan. Especially if we want to permit command-line options to
|
|
have decent control over the priority. When we rewrite the config
|
|
file stuff we might go to a multi-scan to solve some of these
|
|
problems.
|
|
|
|
2000-08-19 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: '99k6, and manually fix configure.
|
|
|
|
* include/ntp_request.h (NTP_MAXHOSTNAME): 144 -> 32
|
|
|
|
2000-08-18 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* util/ntp-genkeys.c (main): Don't call fclose if stream is NULL.
|
|
|
|
2000-08-17 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* html/driver35.htm:
|
|
* ntpd/refclock_pcf.c: Updates and improvements
|
|
From: Andreas Voegele <andreas.voegele@gmx.de>
|
|
|
|
* configure.in (ac_cv_struct_ntptimeval): Lose the TAI check - we
|
|
don't need it since we can check NTP_API. Re-hack the generated
|
|
configure script.
|
|
|
|
* configure: Manual hack to the ntptimeval.time.tv_nsec stuff
|
|
because we're running an old autoconf.
|
|
|
|
2000-08-16 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* util/ntptime.c: Use: HAVE_STRUCT_NTPTIMEVAL_TIME_TV_NSEC, it's
|
|
the standard name.
|
|
|
|
* configure.in: Look for struct ntptimeval.tai in sys/timex.h
|
|
Cleanup struct tptimeval member tests.
|
|
|
|
* util/ntp-genkeys.c: New command-line arguments
|
|
|
|
2000-08-14 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* util/ntp-genkeys.c (main): More small steps...
|
|
|
|
2000-08-13 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_crypto.c (crypto_rsa): Now that we're using
|
|
NTP_KEYSDIR, make sure there is a '/ between the dir and the file.
|
|
|
|
* util/ntp-genkeys.c (main): More small steps...
|
|
|
|
2000-08-12 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* util/ntp-genkeys.c (main): Another small step...
|
|
|
|
* configure.in: 99k5
|
|
|
|
* include/ntp_request.h: Make data[] member of req_pkt 32 again.
|
|
Bump the version number...
|
|
|
|
* ntpd/ntp_loopfilter.c (local_clock): Change 0. to 0 in a couple
|
|
of places.
|
|
From Dave Mills
|
|
|
|
2000-08-11 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* util/ntp-genkeys.c (main): Minimal progress...
|
|
|
|
2000-08-06 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/check_y2k.c: Make debug definition match ntpd.h's declaration
|
|
|
|
* ntpd/Makefile.am (check-local): Use test in favor of [
|
|
|
|
2000-08-05 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (NTP_KEYSDIR): Typo
|
|
|
|
2000-08-04 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ElectricFence/Makefile.am (check-local): use test instead of [
|
|
|
|
* configure.in: AC_REPLACE_FUNCS(strdup)
|
|
* libntp/strdup.c (strdup): Added.
|
|
* libntp/Makefile.am (EXTRA_libntp_a_SOURCES): Added strdup.c
|
|
|
|
* util/Makefile.am (ntp_genkeys_DEPENDENCIES): Use $U on .o files
|
|
(ntp_genkeys_LDADD): ditto.
|
|
|
|
* ntpd/ntp_crypto.c: Use NTP_KEYSDIR
|
|
|
|
* util/ntp-genkeys.c (snifflink): Ignore ENOENT, too.
|
|
|
|
* ntpd/ntp_proto.c (peer_xmit): Crypto cleanup
|
|
* ntpd/ntp_crypto.c: Cleanup
|
|
* ntpd/ntp_control.c: Join the club
|
|
* ntpd/ntp_config.c: Call crypto_config() instead; we got rid of
|
|
crypto_flags.
|
|
* include/ntp_crypto.h (CRYPTO_FLAG_ENAB): New crypto flags, rework
|
|
* include/ntp_control.h (CS_FLAGS): Wiggle in.
|
|
* include/ntp.h: Added crypto peer status to struct peer
|
|
From Dave Mills
|
|
|
|
2000-08-03 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* util/ntp-genkeys.c: Initialize path_keysdir to NTP_KEYSDIR.
|
|
|
|
* configure.in (NTP_KEYSDIR): Added
|
|
* acinclude.m4: Added AC_DEFINE_DIR macro
|
|
|
|
* util/ntp-genkeys.c (main): Sanity checks on the file paths.
|
|
|
|
2000-08-02 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* util/ntp-genkeys.c (crypto_config): Only #ifdef PUBKEY
|
|
(PATH_MAX): Try harder...
|
|
|
|
2000-08-01 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* util/ntp-genkeys.c (main): Use snifflink()
|
|
(snifflink): Implement...
|
|
|
|
* configure.in: Check for readlink()
|
|
|
|
2000-07-31 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* util/ntp-genkeys.c (main): Use strdup on the tokens returned
|
|
from ntp_config...
|
|
(crypto_config): Fix a typo...
|
|
(crypto_config): Even more...
|
|
(usage): Flesh it out.
|
|
|
|
* include/ntp_config.h:
|
|
* ntpd/ntp_config.c: Move a whack of #defines to ntp_config.h so
|
|
ntp-genkeys.c can see them, too.
|
|
|
|
* util/ntp-genkeys.c: Add stubs to work with ../ntpd/ntp_config.o,
|
|
start hooking things up.
|
|
(main): debugging
|
|
(crypto_config): better implementation
|
|
|
|
|
|
* ntpd/ntp_config.c (getconfig):
|
|
* ntpd/ntpd.c: Initialize "debug" here, not in ntp_config.c
|
|
|
|
* util/Makefile.am (ntp_genkeys_LDADD): Added ../ntpd/ntp_config.o
|
|
* util/Makefile.am (ntp_genkeys_DEPENDENCIES): Added.
|
|
|
|
2000-07-30 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99k4
|
|
* util/ntp-genkeys.c: Start hacking for new functionality.
|
|
* include/Makefile.am (noinst_HEADERS): Added ntp_cmdargs.h and
|
|
ntp_config.h .
|
|
* ntpd/ntp_config.c: Grab ntp_cmdargs.h. Make some new globals
|
|
(ugh), move ntpd-specific variables and code to cmd_args.c .
|
|
* ntpd/cmd_args.c: Move command argument processing functions from
|
|
ntp_config.c to this file.
|
|
* ntpd/Makefile.am (ntpd_SOURCES): Added cmd_args.c
|
|
* include/ntpd.h: Move getstartup() to ntp_cmdargs.h
|
|
* include/ntp_cmdargs.h: New file
|
|
Begin the hacking fest to make it easier for ntp-genkeys to use
|
|
ntpd's config processing code. I really hope this is the lesser
|
|
of the evils...
|
|
|
|
2000-07-28 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* util/ntp-genkeys.c (usage): Added.
|
|
|
|
* ntpd/ntp_crypto.c: Cleanup
|
|
* ntpd/ntp_proto.c (transmit): Add some parens.
|
|
(peer_xmit): Add ntohl when grabbing sndauto.seq for broadcast.
|
|
* ntpd/ntp_peer.c (findpeer): Cleanup
|
|
* ntpd/ntp_loopfilter.c (local_clock): Typo
|
|
From Dave Mills
|
|
|
|
* include/ntp_config.h: Created
|
|
|
|
* util/ntp-genkeys.c: Always build, but realize we may not have
|
|
RSAREF. Compile parts appropriately.
|
|
|
|
* util/Makefile.am (bin_PROGRAMS): Always make ntp-genkeys
|
|
(ntp-genkeys_LDADD): Use $LIBRSAREF instead of the "real path"
|
|
* configure.in: Lose MAKE_NTP_GENKEYS
|
|
|
|
* configure.in:
|
|
* util/ntp-genkeys.c:
|
|
* util/Makefile.am:
|
|
Renamed ntp_genkeys to ntp-genkeys.
|
|
|
|
2000-07-27 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpdate/ntpdate.c (ntpdatemain): Cleanup error message.
|
|
|
|
* ntpdate/ntpdate.c (ntpdatemain): Add missing authtrust() call
|
|
From: Jason Heiss <jheiss@cruzeiro.ugcs.caltech.edu>
|
|
|
|
* ntpd/refclock_ulink.c (ulink_receive):
|
|
* ntpd/ntp_crypto.c:
|
|
* libntp/authparity.c:
|
|
Lint/noise cleanup
|
|
From: Marc Brett <mbrett@rgs0.london.waii.com>
|
|
|
|
* ntpd/ntp_proto.c: Specifically track manycastserver and
|
|
survivors
|
|
From: Dave Mills
|
|
|
|
2000-07-26 Sven Dietrich <sven_dietrich@trimble.com>
|
|
|
|
* ntpd/ntpd.c: remove WINNT priority adjustment to the ports/winnt area
|
|
where it does not clutter up the main distribution.
|
|
|
|
2000-07-24 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_proto.c (receive): dstadr_sin needs higher visibility
|
|
From: Dave Mills
|
|
|
|
* flock-build: Added baldwin
|
|
|
|
* ntpd/ntp_request.c:
|
|
* ntpd/ntp_proto.c:
|
|
* ntpd/ntp_peer.c:
|
|
* ntpd/ntp_io.c:
|
|
* ntpd/ntp_intres.c:
|
|
* ntpd/ntp_crypto.c (make_keylist):
|
|
* ntpd/ntp_control.c:
|
|
* ntpd/ntp_config.c (CONF_MOD_IBURST, save_resolve):
|
|
* include/ntpd.h (findpeerbyassoc, newpeer, peer_config, *_interface):
|
|
* include/ntp_request.h (CONF_FLAG_IBURST):
|
|
* include/ntp_crypto.h (crypto_xmit, make_keylist):
|
|
* include/ntp.h (FLAG_IBURST):
|
|
* html/release.htm:
|
|
* html/confopt.htm:
|
|
* html/assoc.htm:
|
|
Add iburst option, fix broadcast/multicast and some types.
|
|
From: Dave Mills
|
|
|
|
2000-07-20 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* scripts/Makefile.am (bin_SCRIPTS): Install ntp-wait
|
|
|
|
* configure.in: 4.0.99k
|
|
|
|
2000-07-19 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_proto.c (peer_xmit): PUBKEY cleanup
|
|
|
|
2000-07-18 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99j5
|
|
|
|
* html/ntpd.htm (HREF): Document other missing command-line options
|
|
|
|
* html/ntpd.htm (HREF): Document
|
|
* html/confopt.htm (href): Undocument
|
|
* ntpd/ntp_config.c (getconfig): -N high for high-priority.
|
|
Lose the ntp.conf way of setting priority.
|
|
|
|
* ntpd/ntp_crypto.c: PUBKEY/AUTOKEY cleanup
|
|
From Dave Mills
|
|
|
|
2000-07-17 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* html/confopt.htm (href): Document it.
|
|
* ntpd/ntp_config.c (getconfig): CONFIG_PRIORITY support
|
|
* ntpd/ntpd.c (set_process_priority): Use it.
|
|
|
|
* ntpd/ntp_crypto.c: Crypto key stuff
|
|
* ntpd/ntp_proto.c: pubkey -> pubkey.ptr
|
|
* ntpd/ntp_control.c (ctl_putpeer): fstamp -> pubkey.fstamp
|
|
* ntpd/ntp_peer.c:
|
|
* include/ntpd.h:
|
|
* include/ntp_types.h:
|
|
* include/ntp_request.h:
|
|
* include/ntp_crypto.h:
|
|
* include/ntp_control.h:
|
|
* include/ntp.h: Type cleanup
|
|
From: Dave Mills
|
|
|
|
2000-07-14 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ElectricFence/Makefile.am (check-local): Don't run the tests if
|
|
we didn't build the programs...
|
|
(check-local): Same, but watch the return codes...
|
|
|
|
* ElectricFence/page.c: #include config.h if it's there.
|
|
Properly handle the sys_errlist declaration.
|
|
|
|
* html/ntpq.htm:
|
|
* html/index.htm:
|
|
* html/debug.htm:
|
|
* html/authopt.htm:
|
|
Reality check.
|
|
From Dave Mills
|
|
|
|
2000-07-13 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* Makefile.am (SUBDIRS): Added ElectricFence
|
|
* configure.in (AC_CONFIG_FILES): Added ElectricFence support
|
|
* ElectricFence: Imporpted.
|
|
|
|
2000-07-12 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* util/ntp_genkeys.c (main): Cleanup
|
|
* ntpd/refclock_wwv.c (wwv_qrz): sqrt -> SQRT
|
|
* ntpd/refclock_chu.c (chu_rf): sqrt -> SQRT
|
|
* ntpd/ntpd.c (set_process_priority): Disable high-priority for now.
|
|
PUBKEY cleanup.
|
|
* ntpd/ntp_timer.c: sys_revoketime cleanup.
|
|
* ntpd/ntp_proto.c (receive): PUBKEY cleanup. Comment and code
|
|
cleanup.
|
|
(process_packet): Comment and code (PUBKEY) cleanup.
|
|
(peer_xmit): Comment and code cleanup.
|
|
(fast_xmit): Comment and code cleanup.
|
|
* ntpd/ntp_peer.c (expire_all): revoketime cleanup. PUBKEY cleanup.
|
|
* ntpd/ntp_crypto.c: Comment reorg. DH parameters are now
|
|
file-static instead of local to subroutines.
|
|
(make_keylist): peer->pcookie.key cleanup/fix
|
|
(crypto_recv): Subroutine documentation cleanup, other cleanup
|
|
(crypto_xmit): Cleanup/document.
|
|
(crypto_setup): Cleanup/document.
|
|
(crypto_agree): Cleanup/document.
|
|
(crypto_rsa): now static
|
|
(crypto_dh): now static. Comment cleanup. Code cleanup.
|
|
(crypto_tai): now static. Code and comment cleanup.
|
|
(crypto_config): Deal with CRYPTO_CONF_LEAP.
|
|
* ntpd/ntp_control.c (CS_DHPARAMS): Rename corresponding token to
|
|
"params". Remove CS_TAI from def_sys_var[].
|
|
(ctl_putsys): CS_HOST, CS_DHPARAMSm CS_REVTIME, and CS_LEAPTIME
|
|
bugfix. CS_TAI cleanup.
|
|
* ntpd/ntp_config.c (CONF_CRYPTO_LEAP): Added
|
|
(getconfig): Added CONF_CRYPTO_LEAP support.
|
|
* include/ntp_syslog.h: Lose GIZMO stuff.
|
|
* include/ntp_crypto.h (CRYPTO_CONF_LEAP): Added
|
|
* include/ntp.h: struct autokey, cookie,value, and pkt changes for
|
|
signature field. Update the inline docs on pkt's exten field.
|
|
From: Dave Mills
|
|
|
|
|
|
2000-07-08 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_util.c (stats_config): If we read a bogus old_drift,
|
|
use 0 instead of failing.
|
|
|
|
2000-07-03 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* README.cvs: Cleanup.
|
|
|
|
* ntpd/refclock_datum.c (datum_pts_poll): index -> unit_index
|
|
* ntpd/ntp_resolver.c (findhostaddr): const cleanup
|
|
* libntp/recvbuff.c:
|
|
* libntp/msyslog.c:
|
|
* libntp/emalloc.c:
|
|
* libntp/authreadkeys.c:
|
|
Fix header order.
|
|
From: Simon Burge <simonb@netbsd.org>
|
|
|
|
* ntpd/ntp_util.c (stats_config): Use HAVE_FINITE and HAVE_ISFINITE
|
|
* configure.in (ac_cv_struct_ntptimeval_timespec): isfinite()
|
|
checks for HP-UX11.
|
|
From: Albert Chin-A-Young <china@thewrittenword.com>
|
|
|
|
2000-07-02 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* flock-build (LIST): Lose malarky, update some machine/OS descriptions
|
|
|
|
* configure.in: 4.0.99j4
|
|
|
|
* ntpq/ntpq.c: Lose PUBKEY stuff - older ntpq's will complain when
|
|
they see the info in a packet.
|
|
* ntpd/ntp_proto.c (peer_xmit): TAI changes.
|
|
* ntpd/ntp_crypto.c: Fix host/network byteorder stuff. Follow
|
|
global->struct changes. TAI changes. Bugfixes.
|
|
* ntpd/ntp_control.c: Follow field reorder/rename.
|
|
* include/ntp_crypto.h: Move crypto stuff from separate globals
|
|
into structs.
|
|
* include/ntp_control.h (CS_HOST): Reorder/rename some fields
|
|
From: Dave Mills
|
|
|
|
2000-06-30 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_peer.c (unpeer): Moved keystr cleanup inside ifdef PUBKEY
|
|
|
|
* configure.in: 4.0.99j3
|
|
|
|
* html/release.htm:
|
|
* html/ntpq.htm:
|
|
* html/authopt.htm:
|
|
Updates from Dave Mills
|
|
|
|
* ntpd/ntp_request.c (dns_a): Don't call crypto_public for now...
|
|
* ntpd/ntp_proto.c (receive): Follow the TEST wiggles
|
|
(peer_xmit): TAI support
|
|
* ntpd/ntp_crypto.c: TAI support
|
|
* ntpd/ntp_control.c: CS_VERSION and CS_TAI support
|
|
* include/ntp_crypto.h (CRYPTO_FLAG_TAI): Added.
|
|
* include/ntp_control.h (CS_VERSION): Added.
|
|
* include/ntp.h (TEST4,TEST5,TEST8,TEST9): Wiggle.
|
|
From: Dave Mills
|
|
|
|
* ntpd/Makefile.am (ntpd_SOURCES): Lose refclock_ulink331.c
|
|
because the new refclock_ulink.c handles it.
|
|
|
|
2000-06-28 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_config.c (getconfig): Sanity check the right variable
|
|
From: Dave Mills.
|
|
|
|
2000-06-25 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99j2
|
|
|
|
* ntpd/ntp_proto.c:
|
|
* ntpd/ntp_peer.c:
|
|
* ntpd/ntp_crypto.c:
|
|
* include/ntp_crypto.h:
|
|
* include/ntp.h:
|
|
AUTOKEY/PUBKEY/DH/crypto changes
|
|
From: Dave Mills
|
|
|
|
2000-06-23 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* html/driver34.htm:
|
|
* ntpd/refclock_ulink.c:
|
|
* ntpd/refclock_ulink331.c: (removed)
|
|
Updated for 320/330 series refclocks
|
|
From: joseph lang <tcnojl1@earthlink.net>
|
|
|
|
* ntpd/refclock_oncore.c: Patches/improvements
|
|
* html/driver30.htm: New release
|
|
From: Reg Clemens <reg@orion.dwf.com>
|
|
|
|
2000-06-17 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99j1
|
|
|
|
* ntpdc/ntpdc.c (getcmds):
|
|
* configure.in:
|
|
Readline support.
|
|
From: Aaron Sherman <ajs@narn.ajs.com>
|
|
|
|
* ntpd/refclock_ulink331.c: Added.
|
|
Sent in by Doug Grosso <dgrosso@mint.net>
|
|
* ntpd/Makefile.am (ntpd_SOURCES): Added refclock_ulink331.c
|
|
|
|
* libntp/snprintf.c: Added stdio.h
|
|
From: Marc Brett <mbrett@rgs0.london.waii.com>
|
|
|
|
* include/ntp.h: struct autokey's siglen is u_int32. So is the
|
|
siglen in struct cookie. So is siglen and value length in struct
|
|
value. Add fstamp to struct peer. Resize the exten AUTOKEY field
|
|
in struct pkt.
|
|
* include/ntp_crypto.h: crypto_enable -> crypto_flags and a
|
|
variety of other cleanups.
|
|
* ntpd/ntp_config.c: crypto_enable -> crypto_flags, and some
|
|
key/fudge cleanup.
|
|
* ntpd/ntp_control.c: Much cleanup.
|
|
* ntpd/ntp_crypto.c: Many changes that Harlan is too tired to
|
|
properly document.
|
|
* ntpd/ntp_peer.c: crypto_enable -> crypto_flags
|
|
(peer_config): Hold off on crypto_public() until some resolver
|
|
issue is fixed.
|
|
* ntpd/ntp_proto.c (receive): Disable the reverse DNS lookup for now.
|
|
(process_packet): Don't record_raw_stats() for now.
|
|
crypto_enable was renamed to crypto_flags.
|
|
(peer_xmit): In MODE_ACTIVE or MODE_PASSIVE, only call
|
|
crypto_xmit() if the peer->cmmd is not CRYPTO_AUTO. Reset
|
|
peer->cmmd to 0 when we're thru.
|
|
Don't reset peer->cmmd to 0 until the end of MODE_CLIENT.
|
|
* ntpd/ntpd.c: Lose the call to crypto_init(). Instead, call
|
|
crypto_setup() later on if we have crypto_flags.
|
|
* util/ntp_genkeys.c: Lose GENLEN; use PRIMELEN/2 .
|
|
From Dave Mills.
|
|
|
|
* ntpd/ntp_crypto.c (crypto_rsa):
|
|
(crypto_dh):
|
|
Do some debug logging if readlink() fails with something other
|
|
than EINVAL (file isn't a symlink).
|
|
|
|
2000-06-04 James R. Van Zandt <jrv@vanzandt.mv.com>
|
|
|
|
* html/miscopt.htm (trap): punctuation
|
|
|
|
* html/ntpd.htm (-g): typo
|
|
|
|
* html/miscopt.htm (logconfig): List the "clock" event class.
|
|
"allprefix" should be two words.
|
|
|
|
2000-05-31 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_timer.c: Protect <unistd.h>
|
|
|
|
2000-05-30 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/Makefile.am: Document what we expect from -lm
|
|
|
|
2000-05-29 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99j
|
|
|
|
2000-05-22 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* html/ntptime.htm: More fixes
|
|
From: Kazu TAKAMUNE <takamune@avrl.mei.co.jp>
|
|
|
|
2000-05-16 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* build (KEYSUF):
|
|
* flock-build:
|
|
* configure.in: Lose the "md5" options from the --with-crypto
|
|
check; Dave hates it.
|
|
|
|
* ntpd/ntp_util.c (stats_config):
|
|
* ntpd/ntp_loopfilter.c (loop_config):
|
|
* libntp/systime.c (adj_systime):
|
|
* include/ntp_proto.h (NTP_MAXFREQ):
|
|
Renamed MAX_FREQ to NTP_MAXFREQ
|
|
|
|
* ntpd/ntpd.c (ntpdmain):
|
|
* ntpd/ntp_proto.c (receive):
|
|
(poll_update):
|
|
* ntpd/ntp_intres.c (addentry):
|
|
* ntpd/ntp_config.c (getconfig):
|
|
Lint cleanup
|
|
From: Marc Brett <mbrett@rgs0.london.waii.com>
|
|
|
|
* include/ntp_stdlib.h:
|
|
* libntp/systime.c (adj_systime):
|
|
* ntpd/ntp_loopfilter.c (loop_config):
|
|
* ntpd/ntp_util.c (stats_config):
|
|
* ports/winnt/ntpd/nt_clockstuff.c (adj_systime):
|
|
MAXFREQ -> MAX_FREQ
|
|
* include/ntp_proto.h: Define MAX_FREQ
|
|
|
|
2000-05-15 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* include/ntp_stdlib.h:
|
|
* libntp/systime.c (adj_systime):
|
|
* ntpd/ntp_loopfilter.c (loop_config):
|
|
* ntpd/ntp_util.c (stats_config):
|
|
* ports/winnt/ntpd/nt_clockstuff.c (adj_systime):
|
|
sys_maxfreq -> MAXFREQ
|
|
Per Dave Mills.
|
|
|
|
2000-05-14 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* acinclude.m4: Typo...
|
|
|
|
2000-05-13 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* libntp/gpstolfp.c (GPSORIGIN): Try new ULONG_CONST macro
|
|
|
|
* ntpdate/ntptimeset.c:
|
|
* ntpdate/ntpdate.h:
|
|
* ntpd/refclock_oncore.c (oncore_msg_En):
|
|
* ntpd/ntp_util.c (stats_config):
|
|
* ntpd/ntp_request.c:
|
|
* ntpd/ntp_intres.c (findhostaddr):
|
|
* ntpd/ntp_config.c (getconfig):
|
|
* libntp/systime.c (adj_systime):
|
|
* libntp/lib_strbuf.c:
|
|
* libntp/authparity.c:
|
|
* libntp/audio.c:
|
|
Header/lint cleanup
|
|
From/reported by: Simon Burge <simonb@netbsd.org>
|
|
|
|
* ntpd/ntp_resolver.c (findhostaddr): Compiler noise cleanup
|
|
|
|
* ntpd/ntp_intres.c: Compiler noise cleanup
|
|
|
|
* html/ntptime.htm: Document reality check
|
|
From: Kazu TAKAMUNE <takamune@avrl.mei.co.jp>
|
|
|
|
2000-05-12 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_intres.c (ntp_intres): Quiet some debug messages
|
|
Reported by: Brian Bergstrand <brianb@mac.com>
|
|
|
|
2000-05-11 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* scripts/mkver.in (ConfStr): Use -r if we're using RSAREF,
|
|
otherwise use -a if we're using autokey, otherwise use no extra
|
|
suffix.
|
|
|
|
2000-05-11 Sven Dietrich <sven_dietrich@trimble.com>
|
|
|
|
* ports/winnt/include/config.h: New defines to support AUTOKEY
|
|
* ports/winnt/include/unistd.h: Added another dummy placeholder.h
|
|
* ports/winnt/ntpd/ntpd.dsp: Added ntp_crypt.c to makefile
|
|
* ports/winnt/ntpd/ntpd.c: service_main needs a local hostname[]
|
|
* html/hints/winnt.htm: Add remark about 4.0.99i not compiling.
|
|
These changes got WINNT running again. No idea if the keys stuff
|
|
works however.
|
|
|
|
2000-05-10 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99i9
|
|
|
|
* ntpd/ntp_crypto.c: tstamp and autokey cleanup
|
|
From: Dave Mills
|
|
|
|
* ntpd/ntp_proto.c (clock_update): Only call expire_all() if
|
|
AUTOKEY
|
|
From many folks, including Reg Clemens <reg@dwf.com>
|
|
|
|
2000-05-07 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99i8
|
|
|
|
* flock-build: Use new --with-crypto choices
|
|
* build (KEYSUF): Deal with new --with-crypto
|
|
* configure.in: --with-crypto={md5,autokey,rsaref};
|
|
lose --enable-autokey
|
|
|
|
2000-05-06 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* build (KEYSUF): Catch --disable-autokey first.
|
|
|
|
2000-05-05 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* flock-build: If we don't use autokey, don't use rsaref either.
|
|
|
|
* configure.in: 4.0.99i7
|
|
|
|
* build (KEYSUF):
|
|
* flock-build:
|
|
It's --disable-autokey now
|
|
|
|
* configure.in: MD5 is not optional (but AUTOKEY is)
|
|
* include/ntp_stdlib.h:
|
|
* libntp/a_md5encrypt.c:
|
|
* libntp/authkeys.c:
|
|
(authhavekey):
|
|
(MD5auth_setkey):
|
|
(auth_delkeys):
|
|
(authencrypt):
|
|
(authdecrypt):
|
|
* libntp/authreadkeys.c:
|
|
(authreadkeys):
|
|
* ntpd/ntp_proto.c (init_proto):
|
|
* libntp/authusekey.c:
|
|
MD5 is required.
|
|
|
|
2000-05-04 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99i6
|
|
|
|
* ntpd/ntp_proto.c (transmit): Fix up the UNREACH code.
|
|
(receive): Lose some debug code.
|
|
(clock_update): expire_all() if LEAP_NOTINSYNC
|
|
crypto_xmit() a CRYPTO_AUTO if !FLAG_AUTOKEY instead of recauto.tstamp
|
|
crypto_xmit() a CRYPTO_PRIV (not CRYPTO_AUTO) based on pcookie.tstamp
|
|
crypto_xmit() a CRYPTO_AUTO (not CRYPTO_PRIV) based on FLAG_MCAST2
|
|
and !FLAG_AUTOKEY
|
|
* ntpd/ntp_crypto.c (crypto_recv): Clean up debug output.
|
|
Don't AUTOKEY if FLAG_MCAST2
|
|
From: Dave Mills
|
|
|
|
* flock-build: Also make obe withouyt md5 (no AUTOKEY)
|
|
* build (BDIR): Handle -noautokey build directory suffix
|
|
* configure.in: Prepare for AUTOKEY in mkver.in
|
|
* scripts/mkver.in (ConfStr): Indicate in the version string if
|
|
we're not using AUTOKEY.
|
|
|
|
2000-05-03 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* scripts/ntp-wait.in: Fun things with backspaces
|
|
|
|
* configure.in: 4.0.99i5
|
|
|
|
* ntptrace/ntptrace.c: Protect sys/ioctl.h; grab config.h
|
|
|
|
* ntpd/ntp_proto.c (transmit): AUTOKEY and tstamp fixes.
|
|
(clock_update): Check oleap against LEAP_NOTINSYNC
|
|
(peer_clear): Free pubkey when we're done
|
|
Check peer's keynumber against the seq in MODE_BROADCAST.
|
|
Reorder tstamp changes.
|
|
* ntpd/ntp_crypto.c (crypto_recv): Check the packet if we get a
|
|
CRYPTO_RESP and reorder the update of tstamp.
|
|
(crypto_recv): Don't expire the peer until we're thru with it.
|
|
* include/ntp.h: AUTOKEY and pkeyid changes
|
|
From Dave Mills
|
|
|
|
* ntpdate/ntpdate.c: Protect sys/ioctl.h
|
|
|
|
2000-05-01 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99i4
|
|
|
|
* include/ntp.h:
|
|
* include/ntp_crypto.h:
|
|
* include/ntpd.h:
|
|
* ntpd/ntp_crypto.c:
|
|
* ntpd/ntp_proto.c:
|
|
* ntpd/ntpd.c:
|
|
* util/ntp_genkeys.c:
|
|
Dave Mills closed some potential vulnerabilities in the key protocol.
|
|
|
|
2000-04-28 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99i3
|
|
|
|
* ntpd/ntp_proto.c: Just check tstamp, forget about sndauto.seq
|
|
* ntpd/ntp_crypto.c (crypto_recv): Lose inappropriate ntohl()
|
|
conversion on tstamp.
|
|
AUTOKEY if tstamp>0, not !=
|
|
Stash tstamp before we check pcookie.key (several places)
|
|
* ntpd/ntp_control.c (ctl_putpeer): In CP_INITSEQ, check
|
|
recauto.key, not keylist.
|
|
From: Dave Mills
|
|
|
|
2000-04-27 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99i2
|
|
|
|
* ntpq/ntpq.c: PUBKEY stuff
|
|
* ntpd/ntp_proto.c (clock_select): nreach, and better survivor pick.
|
|
* ntpd/ntp_peer.c (newpeer): Better nextdate choice.
|
|
* ntpd/ntp_control.c (ctl_putsys): Buglet in CS_HOSTNAM code.
|
|
From Dave Mills.
|
|
|
|
2000-04-24 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* build (IAM): Show hostname if we trip a buildkey check.
|
|
|
|
2000-04-23 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* build: deal with optional 1st argument (SIG), which must match
|
|
the contents of .buildkey
|
|
|
|
* flock-build: Generalize, implement SIG and .buildkey, and drive
|
|
list from LIST, which the user can override.
|
|
|
|
2000-04-21 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99i1
|
|
Dave updated some docs, implemented the kpoll variable, and
|
|
wiggled a host/network byte order thing in the crypto key code.
|
|
|
|
2000-04-16 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_wwvb.c (wwvb_receive): Grab any character (instead
|
|
of just a space) before the DSTchar.
|
|
From: Dave Mills
|
|
|
|
2000-04-11 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99i
|
|
|
|
Dave made some documentation updates.
|
|
|
|
2000-04-08 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* flock-build: Add malarky. By default, --enable-parse-clocks.
|
|
Start 2 builds, one with and the other without rsaref.
|
|
|
|
* configure.in: 4.0.99h6
|
|
Dave improved the crypto stuff some more.
|
|
|
|
2000-04-05 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_acts.c (acts_receive): Do a better job with year
|
|
conversions and leap-year checks. The PTB stuff caught this.
|
|
Reported by: Daniel.Aeby@eam.admin.ch
|
|
|
|
2000-04-02 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_atom.c (atom_pps): Bugfix
|
|
From: Philippe Charnier <charnier@xp11.frmug.org>
|
|
|
|
2000-03-30 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* libparse/clk_wharton.c (cvt_wharton_400a): Do not return
|
|
CVT_NONE when receiving the early warning bit set.
|
|
From: Philippe De Muyter <phdm@macqel.be>
|
|
|
|
* configure.in: 4.0.99h5
|
|
Dave made more changes to the auth key stuff.
|
|
|
|
2000-03-29 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99h4
|
|
Dave made a bunch of changes/fixes to the auth key stuff.
|
|
|
|
2000-03-22 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_resolver.c: Typos.
|
|
|
|
2000-03-21 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99h3
|
|
|
|
* ntpd/ntp_intres.c: Use LOG_INFO instead of LOG_DEBUG.
|
|
* ntpd/ntp_resolver.c: Ditto.
|
|
|
|
2000-03-20 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* util/Makefile.am (ntp_genkeys_LDADD): Might need snprintf (-lntp)
|
|
|
|
* librsaref/Makefile.am (stamp-rsaref): nodist_HEADERS are not
|
|
supoprted yet. Hack around it.
|
|
|
|
* ntpd/ntp_resolver.c (findhostaddr): hstrerror isn't always available.
|
|
|
|
* configure.in: Look for hstrerror.
|
|
|
|
* util/ntp_genkeys.c (main): Use snprintf, not sprintf.
|
|
|
|
* ntpd/ntp_crypto.c: Use gethostname, not uname
|
|
* util/ntp_genkeys.c: Ditto
|
|
From: Dave Mills
|
|
|
|
2000-03-19 Harlan Stenn <harlan@pfcs.com>
|
|
|
|
* ntpd/ntp_proto.c (receive): Rename ntp_res_send() to
|
|
ntp_res_name() and adjust the number of arguments.
|
|
* ntpd/ntp_resolver.c (ntp_res_name): Ditto
|
|
* include/ntpd.h: Ditto
|
|
|
|
* ntpd/ntp_resolver.c: Add de_done to the dns_entry structure.
|
|
|
|
2000-03-18 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99h2
|
|
|
|
* libparse/Makefile.am (info_trimble.c): Use $(srcdir)/foo.sed
|
|
instead of foo.sed .
|
|
|
|
* librsaref/Makefile.am (stamp-rsaref): Copy each file to the build
|
|
directory, not to the source directory. This sucks; it wastes
|
|
space (but it's more portable).
|
|
|
|
* configure.in (ac_busted_vpath_in_make): Add FreeBSD. I bet all
|
|
systems that use pmake will need this.
|
|
(ac_busted_vpath_in_make): Remove FreeBSD - I found a workaround.
|
|
|
|
* Makefile.am: General cleanup
|
|
|
|
* configure.in: 4.0.99h1
|
|
|
|
* ntpd/ntp_resolver.c: Lose unneeded header.
|
|
|
|
2000-03-17 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* libntp/snprintf.c: #include <config.h>
|
|
|
|
* libntp/Makefile.am (EXTRA_libntp_a_SOURCES): Use it correctly...
|
|
|
|
2000-03-16 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* libntp/Makefile.am (EXTRA_DIST): Added snprintf.c
|
|
|
|
* configure.in: Look for (and provide if it's missing) snprintf()
|
|
|
|
* ntpd/ntp_request.c (dns_a): Call crypto_public with the resolved
|
|
name and the peer pointer.
|
|
(dns_a): crypto_public() is only available if PUBKEY is #defined.
|
|
|
|
* ntpd/ntp_crypto.c (crypto_public): sprintf is Evil. Use snprintf.
|
|
(crypto_setup): Ditto
|
|
(crypto_read): Ditto
|
|
|
|
* ntpd/ntp_resolver.c (ntp_res_send): Lose some debugging noise.
|
|
|
|
* ntpd/ntp_config.c (getconfig): Lose testing code.
|
|
|
|
* ntpd/ntp_request.c (dns_a): Fix buglet in hostname length check.
|
|
|
|
2000-03-16 Harlan Stenn <harlan@pfcs.com>
|
|
|
|
* ntpd/ntp_request.c (dns_a): Start cracking the returned information.
|
|
|
|
2000-03-15 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_resolver.c (ntp_res): Authenticate the keyid.
|
|
|
|
* ntpd/ntp_crypto.c (crypto_line): Fix definition
|
|
(crypto_read): Ditto.
|
|
|
|
* ntpd/ntp_config.c (getconfig): Move req_keyid generation here.
|
|
|
|
* librsaref/Makefile.am (BUILT_SOURCES): Cleanup more nodist_ stuff.
|
|
|
|
2000-03-14 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* build (RSASUF): If we have rsaref2/ and are building
|
|
--without-rsaref, note it as a build-directory suffix.
|
|
|
|
* configure.in: 4.0.99h
|
|
Crypto merge
|
|
|
|
* librsaref/Makefile.am (nodist_librsaref_a_SOURCES): Added nodist_
|
|
|
|
2000-02-28 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: Lose the changequote calls and fix the quoting.
|
|
Reported by: Akim Demaille <akim@epita.fr>
|
|
|
|
* ntpd/ntp_request.c: Log various error conditions.
|
|
|
|
2000-02-27 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99g
|
|
|
|
* ntpd/ntpd.c: Only log EINTR if debug > 2.
|
|
|
|
2000-02-25 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* scripts/mkver.in (ConfStr): Use `-r' when configured with crypto.
|
|
|
|
* ntpd/refclock_wwvb.c (wwvb_receive): Undo the previous chagne.
|
|
|
|
2000-02-24 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_wwvb.c (wwvb_receive): LENWWVB0 can return 6 or 7
|
|
fields.
|
|
From: Michael Sinatra <msinatra@uclink4.berkeley.edu>
|
|
with a cleanup from Ulrich.
|
|
|
|
* scripts/mkver.in (ConfStr): Make RSAREF appear as part of the
|
|
version.
|
|
|
|
2000-02-21 Sven Dietrich <sven_dietrich@trimble.com>
|
|
|
|
* ports/winnt/include/config.h: Enable MD5 and RANDOM by default
|
|
* ports/winnt/libntp/SetSystemTime.c: Fix warning and const declaration
|
|
From: Carl Byington <carl@five-ten-sg.com>
|
|
|
|
2000-02-21 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* Makefile.am (SUBDIRS): Make librsaref right after includes so we
|
|
can copy any needed header files over.
|
|
|
|
* libntp/Makefile.am (INCLUDES): Also look in librsaref for des.h
|
|
* ntpd/Makefile.am (INCLUDES): Ditto
|
|
* util/Makefile.am (INCLUDES): Ditto
|
|
|
|
* librsaref/Makefile.am (librsaref_a_SOURCES): Use the des.h from
|
|
the rsaref2 distribution.
|
|
|
|
* include/Makefile.am (noinst_HEADERS): No, we don't want des.h
|
|
|
|
2000-02-20 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* include/Makefile.am (noinst_HEADERS): Add des.h
|
|
|
|
2000-02-19 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_config.c (do_resolve_internal): Try Real Hard to
|
|
generate a full random key.
|
|
From: Carl Byington <carl@five-ten-sg.com>
|
|
|
|
* include/ntp.h: Now we know we have either mrand48() or random().
|
|
* configure.in: If we have mrand48, use it. Otherwise, use (and
|
|
provide if necessary) random().
|
|
* libntp/Makefile.am (EXTRA_DIST): random.c
|
|
* libntp/random.c: Added.
|
|
|
|
2000-02-18 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* librsaref/Makefile.am (stamp-rsaref): Typo
|
|
|
|
* configure.in (ac_cv_func_ctty_for_f_setown): Yes for OpenBSD
|
|
(ac_cv_var_ntp_syscalls): Fix quoting of description
|
|
From: Jonathan Rozes <jrozes@vinton.com>
|
|
|
|
* librsaref/Makefile.am: Fix stamp-rsaref dependency order.
|
|
|
|
* configure.in: 4.0.99f
|
|
|
|
2000-02-17 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_mx4200.c: Remove the DOP-weighted position
|
|
averaging code and revert to a simple mean average. The weighted
|
|
average consistently produced a *worse* result. Go figure.
|
|
* html/mx4200data.htm: Cleanup, reflect current reality.
|
|
* html/driver9.htm: Cleanup, reflect current reality.
|
|
* html/copyright.htm: Cleanup, and credit where credit is due.
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
* ntpd/refclock_oncore.c: Cleanup/fixes
|
|
* html/driver30.htm: Cleanup
|
|
* html/Oncore-SHMEM.htm: Cleanup
|
|
From: Reg Clemens <reg@dwf.com>
|
|
|
|
2000-02-16 Sven Dietrich <sven_dietrich@trimble.com>
|
|
|
|
* winnt/scripts/mkver.bat: Frederick Czajka [w2k@austin.rr.com]
|
|
winnt/ntpq/ntpq.dsp: modified mkver.bat to eliminate the
|
|
winnt/ntpd/ntpd.dsp: need to have Perl installed and the
|
|
winnt/ntpdc/ntpdc.dsp: PERL environment variable to be set.
|
|
winnt/ntpdate/ntpdate.dsp:
|
|
winnt/ntptrace/ntptrace.dsp: Thanks, Frederick!
|
|
|
|
* ntpd/refclock_nmea.c: Correctly interpret the quality indicator.
|
|
|
|
2000-02-15 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_nmea.c: Correctly interpret the quality indicator.
|
|
Deal with the time supplied in centiseconds. GPGCA/GPGGA cleanup.
|
|
From: Andrew Hood <ajhood@fl.net.au>
|
|
|
|
* libparse/Makefile.am (K_CFLAGS): Use instead. Add NEED_NTP_BOPS.
|
|
|
|
2000-02-10 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* scripts/ntp-wait.in: Intensify, including some suggestions from
|
|
Ulrich.
|
|
|
|
* configure.in: 4.0.99e
|
|
|
|
* scripts/ntp-wait.in: Lose cruft, sleep after each try.
|
|
|
|
* scripts/ntp-restart: It's ntpd now. Also, call ntp-wait.
|
|
|
|
* configure.in (AC_CONFIG_*): New scripts that use PATH_PERL
|
|
|
|
* scripts/Makefile.am (noinst_SCRIPTS): Added ntp-wait
|
|
(noinst_SCRIPTS): Added all of the scripts that now use PATH_PERL
|
|
|
|
* configure.in: Get the path to perl
|
|
(AC_CONFIG_*): Added scripts/ntp-wait
|
|
|
|
* ntptrace/ntptrace.c (DoTrace): If the server's srcadr is 0.0.0.0
|
|
then we haven't synced yet. Note and punt.
|
|
Reported by: Bdale Garbee <bdale@gag.com>,http://bugs.debian.org/56551
|
|
|
|
2000-02-09 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ports/winnt/include/config.h: Typo (CLOCK_PALISADE comment)
|
|
From: Carl Byington <carl@five-ten-sg.com>
|
|
|
|
* configure.in: Disable kernel_fll_bug for Generic_105181-17 under
|
|
Solaris-2.6
|
|
From: Juergen Georgi <georgi@belwue.de>
|
|
|
|
2000-02-07 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99d
|
|
|
|
* html/Oncore-SHMEM.htm: New document
|
|
* html/driver30.htm: Cleanup and improvements
|
|
From: Reg Clemens <reg@dwf.com>
|
|
|
|
2000-01-30 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_oncore.c: Patches/improvements
|
|
From: Reg Clemens <reg@dwf.com>
|
|
|
|
2000-01-29 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99c
|
|
|
|
2000-01-28 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: Autoconf update...
|
|
|
|
* ntpdate/ntpdate.c (ntpdatemain): Typo
|
|
From: Jack Bryans <jbryans@csulb.edu>
|
|
|
|
* Makefile.am (EXTRA_DIST): Add flock-build. Probably UDel specific...
|
|
|
|
2000-01-23 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/check_y2k.c (main): Reformat for ansi2knr
|
|
|
|
* configure.in (AC_OUTPUT): Revert to obsolete form until automake
|
|
catches up.
|
|
|
|
2000-01-22 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: Use AC_CHECK_TYPES((s_char)) instead of
|
|
AC_CHECK_TYPE.
|
|
(ac_cv_var_kernel_fll_bug): Generic_106541-08 is apparently OK, too.
|
|
|
|
* scripts/Makefile.am (EXTRA_DIST): Need to explicitly distribute
|
|
mkver.in and ntpver.in now, apparently.
|
|
* configure.in: Search for the various audio_info members so the
|
|
printing in audio_show is less of a circus. This required an
|
|
autoconf upgrade. Major sigh.
|
|
|
|
* libntp/audio.c (audio_show): Clean up (more) properly.
|
|
|
|
2000-01-21 Sven Dietrich <sven_dietrich@trimble.com>
|
|
|
|
* Add pointer to html/hints/winnt.htm to INSTALL file
|
|
* Fix NT makefiles to accomodate at least one weird
|
|
version of Visual C that can't handle the LFs without
|
|
the DOS CR also.
|
|
|
|
2000-01-20 Sven Dietrich <sven_dietrich@trimble.com>
|
|
|
|
* Update Copyright in Palisade driver to 2000
|
|
* Fix Palisade MIN & MAX POLL to optimal values
|
|
|
|
2000-01-19 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* html/driver7.htm: Patches from Dave Mills
|
|
* html/driver36.htm: Patches from Dave Mills
|
|
|
|
* html/copyright.htm: Added Kamal Mostafa
|
|
|
|
2000-01-19 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99b
|
|
|
|
2000-01-18 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_chu.c: NCHAN is used with generic ICOM.
|
|
|
|
* ntpd/refclock_wwv.c: Use new audio stuff
|
|
* ntpd/refclock_irig.c: Use new audio stuff
|
|
* ntpd/refclock_chu.c: Use new audio stuff
|
|
* ntpd/ntp_proto.c: Clean up
|
|
* ntpd/ntp_loopfilter.c (local_clock): Clean up error message
|
|
* include/icom.h: Number of arguments changed
|
|
* libntp/Makefile.am (libntp_a_SOURCES): Added audio.c
|
|
* libntp/audio.c: New file
|
|
* include/Makefile.am (noinst_HEADERS): audio.h added
|
|
* include/audio.h: New file
|
|
From: Dave Mills <mills@udel.edu>
|
|
|
|
* scripts/freq_adj: Added. FreeBSD frequency adjustment script.
|
|
|
|
* configure.in: Do a better job on my oncore_ok check for SCO.
|
|
|
|
2000-01-15 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99a
|
|
|
|
* scripts/ntpsweep: New version
|
|
* html/copyright.htm: Added Hans Lambermont
|
|
From: Hans Lambermont <Hans.Lambermont@nl.origin-it.com>
|
|
|
|
2000-01-14 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_oncore.c (oncore_start): Only dance with the
|
|
pps_device if it's there.
|
|
From: reg@dwf.com
|
|
|
|
* configure.in: ONCORE is OK if ac_cv_hdr_def_tiocdcdtimestamp=yes
|
|
|
|
* build: Just overwrite the log file each time; sometimes NFS goes
|
|
a little goofy.
|
|
|
|
* ntpd/refclock_fg.c: Syntax/punctuation cleanup
|
|
|
|
2000-01-13 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* scripts/ntpsweep: New version
|
|
From: Hans Lambermont <Hans.Lambermont@nl.origin-it.com>
|
|
|
|
* ntpd/refclock_fg.c: New version
|
|
* html/driver37.htm: New version
|
|
From: Dmitry Smirnov <das@online.nsk.su>
|
|
|
|
2000-01-12 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* README.des: Cleanup
|
|
|
|
2000-01-12 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.99
|
|
|
|
* html/driver36.htm: Cleanup
|
|
* html/monopt.htm: Ditto
|
|
From: Dave Mills <mills@udel.edu>
|
|
|
|
* ntpd/ntp_intres.c (ntp_intres): Put "NTP_INTRES running" at a
|
|
higher debug level
|
|
|
|
2000-01-11 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_wwv.c: More improvements
|
|
From: Dave Mills <mills@udel.edu>
|
|
|
|
2000-01-10 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_wwv.c: Bugfixes/improvements
|
|
From: Dave Mills <mills@udel.edu>
|
|
|
|
* configure.in: Get the quoting right on the sys_errlist check.
|
|
From documentation by: Akim Demaille <akim@epita.fr>
|
|
|
|
2000-01-08 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: <netinet/ip.h> cannot be detected...
|
|
* ntpd/ntp_io.h: ...but every OS has it
|
|
* ntpd/refclock_oncore.c: Lint removal
|
|
* ntpq/ntpq_ops.c: Lint removal
|
|
* ntpq/refclock_chu.c: chu_major() is not an audio routine (?), lint
|
|
* libntp/icom.c: AIX doesn't have <sys/termios.h>
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
* ntpd/refclock_chu.c: NetBSD needs sys/ioctl.h
|
|
(chu_debug): NetBSD-specific debug output.
|
|
From: Frederick Bruckman <fb@enteract.com>
|
|
|
|
2000-01-06 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.98m
|
|
I skipped `l' - it looks like a `1'.
|
|
|
|
* html/driver7.htm: Doc update
|
|
* html/driver36.htm: Ditto
|
|
* html/audio.htm: Ditto
|
|
|
|
* ntpd/refclock_wwv.c: Dvae snuck another fix/change in on me.
|
|
|
|
* configure.in: 4.0.98k
|
|
|
|
* ntpd/refclock_chu.c (chu_start): Call icom_init with the speed
|
|
* ntpd/refclock_wwv.c (wwv_start): Ditto, plus other improvements.
|
|
* libntp/icom.c (icom_init): Add speed parameter
|
|
* include/icom.h: Update declaration
|
|
From: Dave Mills <mills@udel.edu>
|
|
|
|
* include/Makefile.am (noinst_HEADERS): Added icom.h
|
|
From: Frederick Bruckman <fb@enteract.com>
|
|
|
|
2000-01-05 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.98j
|
|
|
|
* ntpd/refclock_wwv.c (timecode): Make definition == declaration
|
|
(wwv_newchan): Ditto
|
|
(wwv_corr4): Dave fixed the declaration.
|
|
|
|
* flock-build: Add rackety to the flock - it runs SunOS 4.1.3/cc
|
|
|
|
* ntpd/refclock_wwv.c: Undo that declaration cleanup for now...
|
|
|
|
* ntpd/ntp_io.c (open_socket): TOS support
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
2000-01-04 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_wwv.c: Declaration cleanup
|
|
* ntpd/refclock_fg.c (fg_receive): Not all sprintf's are created
|
|
equal...
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
* ntpd/refclock_wwv.c: Dave Cleaned and Improved things.
|
|
* ntpd/ntp_loopfilter.c (local_clock): Dave fixed something.
|
|
|
|
* ntpd/refclock_wwv.c: Rename max to p_max or s_max as appropriate
|
|
to avoid native SunOS compiler collision.
|
|
(wwv_epoch): Make declaration == definition
|
|
(wwv_rsec): Ditto
|
|
(wwv_newchan): Ditto
|
|
(wwv_qsy): Ditto
|
|
(timecode): Ditto
|
|
|
|
* ntpd/refclock_oncore.c (oncore_init_shmem): Use a cast to widen
|
|
mmap's NIL offset.
|
|
|
|
* ntpd/refclock_chu.c (chu_rf): Make declaration == definition.
|
|
Rename min/max to es_min/es_max to avoid native SunOS compiler
|
|
collision.
|
|
(chu_uart): Make declaration == definition.
|
|
|
|
* libntp/icom.c (sndpkt): Make declaration and definition equivalent.
|
|
(doublefreq): Ditto.
|
|
|
|
* ntpd/refclock_oncore.c (MAP_FAILED): Some systems do not #define
|
|
this.
|
|
|
|
* ntpd/refclock_wwv.c:
|
|
* ntpd/refclock_chu.c:
|
|
* libntp/icom.c:
|
|
* libntp/Makefile.am:
|
|
* include/icom.h:
|
|
* html/driver7.htm:
|
|
* html/driver36.htm:
|
|
Support for ICOM. The WWV/H driver, by the way, is getting truly
|
|
awesome. The CHU autotune function works okay as it is. I'd like
|
|
to find somebody else to test the audio drivers just to make sure
|
|
I haven't done something stupid. There is a new define ICOM
|
|
intended for the driver autotune function; however, I crafted the
|
|
thing in much the same way as the refclock_atom.c thing - it tries
|
|
to open /dev/icom and, if that fails, goes quietly to sleep.
|
|
From: Dave Mills <mills@udel.edu>
|
|
|
|
2000-01-03 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_oncore.c (oncore_read_config): Patches and cleanup
|
|
From: Poul-Henning Kamp <phk@critter.freebsd.dk>
|
|
more isascii() stuff from HMS.
|
|
|
|
* ntpd/refclock_fg.c (fg_receive): Cast.
|
|
From: Tom Smith <smith@cag.lkg.dec.com>
|
|
|
|
* ntpd/map_vme.c (map_vme): tx.access_result indicates failure on
|
|
< 0, not <= 0. A fix that apparently did not get brought over
|
|
from the ntp3 base.
|
|
From: Michael Barone <michael.barone@lmco.com>
|
|
|
|
* configure.in: Move the ONCORE_SHMEM_STATUS check and definition
|
|
here.
|
|
|
|
* ntpd/refclock_oncore.c (oncore_init_shmem): Some systems do not
|
|
have MAP_HASSEMAPHORE.
|
|
|
|
* ntpd/refclock_oncore.c: Drive ONCORE_SHMEM_STATUS based on
|
|
HAVE_SYS_MMAN_H . If this needs finer checks, do it in
|
|
configure.in .
|
|
(oncore_read_config): Add the isascii() checks; older versions of
|
|
Unix don't guarantee correct behavior of is*() without it.
|
|
|
|
* ntpd/refclock_oncore.c: Add proof-of-concept support for
|
|
delivering receiver data stream to other processes through
|
|
a memory-mapped file.
|
|
From: Poul-Henning Kamp <phk@FreeBSD.org>
|
|
|
|
2000-01-02 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (ac_refclock_chu): Provide the CHU driver by
|
|
default, and by default prefer the AUDIO version. We used to
|
|
limit this to SunOS or Solaris; now we drive by the availability
|
|
of the audioio header file.
|
|
Select the IRIG and WWV audio drivers the same way.
|
|
|
|
* flock-build: build ignores the -l flag; lose it.
|
|
(BUILD_ARGS): added.
|
|
* build: Remove unused -l stuff (LOG variable).
|
|
|
|
* ntpd/ntp_refclock.c: HAVE_PPSAPI header cleanup
|
|
From: Reg Clemens <reg@dwf.com>
|
|
|
|
2000-01-01 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (CLOCK_WWV): Require <sys/audioio.h> or <sun/audioio.h>
|
|
|
|
1999-12-29 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.98i
|
|
|
|
* ntpd/refclock_gpsvme.c: Fixes
|
|
From: Michael Barone <michael.barone@lmco.com>
|
|
Patch severely hacked by HMS to "make it conform". I hope I
|
|
didn't break anything.
|
|
|
|
* scripts/ntpsweep: Nifty utility
|
|
From: Hans.Lambermont@nl.origin-it.com
|
|
|
|
* ntpd/refclock_fg.c:
|
|
* ntpd/refclock_conf.c:
|
|
* ntpd/ntp_control.c:
|
|
* ntpd/Makefile.am:
|
|
* libntp/clocktypes.c:
|
|
* include/ntp.h:
|
|
* html/refclock.htm:
|
|
* html/driver37.htm:
|
|
* configure.in:
|
|
* acconfig.h:
|
|
Forum Graphic GPS clock support
|
|
From: Dmitry Smirnov <das@online.nsk.su>
|
|
|
|
* configure.in: Default to compile the IRIG, CHU and WWV/H
|
|
drivers and compile the CHU driver for audio, not modem.
|
|
Requested by Dave Mills.
|
|
|
|
* html/audio.htm:
|
|
* html/driver36.htm:
|
|
* html/qth.htm:
|
|
Dave wrote these to go along with the changes I checked in yesterday.
|
|
|
|
1999-12-28 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_wwv.c:
|
|
* ntpd/refclock_conf.c:
|
|
* ntpd/refclock_chu.c:
|
|
* ntpd/ntp_refclock.c:
|
|
* ntpd/ntp_loopfilter.c:
|
|
* html/refclock.htm:
|
|
* html/pps.htm:
|
|
* html/index.htm:
|
|
* html/driver7.htm:
|
|
* html/driver6.htm:
|
|
* html/copyright.htm:
|
|
|
|
I indulged an old agenda to polish up some programs originally
|
|
written for a DSP evaluation board. The result is a really hot
|
|
audio driver for the NIST WWV/WWVH time/frequency station plus a
|
|
makeover for the CHU audio driver. Currently, they and their IRIG
|
|
audio driver buddy use the SunOS/Solaris audio interface, which is
|
|
clean and simple. I hook the line in jack to a shortwave radio and
|
|
these drivers (driver 7 for CHU and driver 36 for WWV) and the
|
|
drivers do the rest. The WWV/H driver is really hot - I am
|
|
currently watching the ionosphere move from the doppler that shows
|
|
up on the tick modulation tracked by the program. During midday
|
|
when the F2 layer settles down, the program closes in on a few
|
|
tens of microseconds of spare jitter and wander. This watch on
|
|
whichever 15/20 MHz signal sounds the best. At night on 5/10 MHz
|
|
and even 2.5 HMz where the multipath, interference and noise are
|
|
much worse, the driver bangs around somewhat more.
|
|
|
|
The CHU driver makeover discovered a few broken bones after all
|
|
these years, but its majority decoder is back in business. For
|
|
various reasons to icky to reveal here, its 103-modem demodulator
|
|
is not quite as good as the chip, but it comes close and hey,
|
|
2025/2125 FSK is just not a good idea for HF radio. This driver is
|
|
not nearly as sophisitcated as the WWV/H driver, but here a few
|
|
hundred miles south of Ottawa, it does a passably good job.
|
|
|
|
I tell you this in the hopes of getting somebody interested in
|
|
porting the audio interface to other machines, in particular
|
|
Linux, FreeBSD and anything else with a sound card. When the
|
|
ionosphere stays cool, the WWV/H driver is as good as anything
|
|
else around here and with much less jitter than a serial port. The
|
|
only downside is all the audio drivers chew up a modest fraction
|
|
of cycles for the DSP routines - a few percent on the newer
|
|
silicon, up to half the cycles on an old Sparc IPC. Whattheheck,
|
|
these old machines aren't doing anything else around here except
|
|
serving time, and even when sucking cycles for DSP they still mind
|
|
the PPS microseconds.
|
|
|
|
The audio driver documentation had a makeover, too.
|
|
From: Dave Mills <mills@udel.edu>
|
|
|
|
1999-12-20 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.98h
|
|
|
|
1999-12-19 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* libntp/syssignal.c: Small cleanup to Marc's patch.
|
|
|
|
* ntpd/ntp_refclock.c:
|
|
* ntpd/refclock_atom.c: Header cleanup
|
|
* html/driver30.htm: Cleanup and improvements.
|
|
From: Reg Clemens <reg@dwf.com>
|
|
|
|
* ntpd/ntp_refclock.c:
|
|
* ntpd/refclock_jupiter.c:
|
|
* ntpd/refclock_msfees.c:
|
|
* ntpd/refclock_mx4200.c:
|
|
Portability (Solaris) patches
|
|
* ntpd/refclock_mx4200.c:
|
|
Self-survey improvements, cleanup for, PPS re-activation
|
|
* libntp/syssignal.c:
|
|
Fix for "interrupted system call" (EINTR) failure of the PPS
|
|
ioctl(TIOCGPPSEV) call in Solaris. Not sure why it was
|
|
interrupted, but this works around the failure. Not sure if
|
|
the (now silent) interrupt affects the timing accuracy.
|
|
THERE IS A CHANCE THIS PART OF THE PATCH MAY ADVERSELY
|
|
AFFECT OTHER SYSTEMS!
|
|
* scripts/ntp-status: Added.
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
* ntpdate/ntpdate.c: Deal with multiple addresses.
|
|
From: Jeffrey C Honig <jch@bsdi.com>
|
|
|
|
* ntpd/refclock_conf.c: Replaced macro SHM with CLOCK_SHM.
|
|
* ntpd/refclock_shm.c (shm_poll): Take clock time in UTC.
|
|
pp->day starts at 1, t->tm_yday starts at 0.
|
|
From: Jakob Stoklund Olesen <stoklund@taxidriver.dk>
|
|
|
|
1999-12-16 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* NEWS: Updated ONCORE instructions
|
|
From: Kamal A Mostafa <kamal@whence.com>
|
|
|
|
1999-12-13 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.98g
|
|
|
|
* ntpd/refclock_oncore.c: Cleanup and fixes
|
|
From: Reg Clemens <reg@dwf.com> and Kamal A Mostafa <kamal@whence.com>
|
|
|
|
1999-12-11 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_wwv.c: Cleanup/checkin of the current state of affairs.
|
|
From: Dave Mills <mills@udel.edu>
|
|
|
|
* ntpd/refclock_oncore.c: #elif conversion. I can only hope I did
|
|
it right.
|
|
|
|
* ntpd/refclock_oncore.c: Various patches
|
|
From: Reg Clemens <reg@dwf.com> and Kamal A Mostafa <kamal@whence.com>
|
|
|
|
1999-12-09 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_proto.c (default_get_precision): Use the right arg type
|
|
to pass "sizeof freq" to sysctlbyname().
|
|
From: Ollivier Robert <roberto@eurocontrol.fr>
|
|
|
|
* ntpd/refclock_wwv.c: Cleanup and fixes.
|
|
From: Dave Mills <mills@udel.edu>
|
|
|
|
1999-12-08 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_wwv.c: Cleanup and fixes
|
|
* ntpd/refclock_conf.c: WWV declaration cleanup.
|
|
From: Dave Mills <mills@udel.edu>
|
|
|
|
1999-12-07 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* libparse/clk_rawdcf.c (cvt_rawdcf): Buglet.
|
|
From: Frank Kardel <kardel <AT> acm.org>
|
|
|
|
1999-12-06 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/Makefile.am (ntpd_SOURCES): Added refclock_wwv.c
|
|
|
|
* ntpd/refclock_wwvb.c:
|
|
* ntpd/refclock_wwv.c:
|
|
* ntpd/refclock_conf.c:
|
|
* ntpd/refclock_chu.c:
|
|
* libntp/clocktypes.c:
|
|
* include/ntp.h: Dave cleaned some things up
|
|
Dave cleaned some things up (WWVB -> SPECTRACOM, CHU -> CHU_AUDIO,
|
|
WWV_AUDIO)
|
|
|
|
* acconfig.h: REFCLOCK_WWVB -> REFCLOCK_SPECTRACOM, added REFCLOCK_WWV
|
|
* configure.in: Deal with it.
|
|
|
|
1999-12-05 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_refclock.c (refclock_open): More PPS cleanup
|
|
From: Dave Mills <mills@udel.edu>
|
|
|
|
* ntpq/ntpq.c:
|
|
* ntpq/ntpq_ops.c:
|
|
Make `ntpq -pn' independent of DNS, ad advertised.
|
|
From: Kamal A Mostafa <kamal@whence.com>
|
|
|
|
* ntpd/refclock_mx4200.c (mx4200_start): make missing 3rd
|
|
parameter a 0.
|
|
|
|
1999-12-04 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_refclock.c (refclock_open): "flags" processing cleanup
|
|
(refclock_open): PPS device initialization cleanup
|
|
* include/ntp_refclock.h (LDISC_CHU):
|
|
(LDISC_PPS): Clean up comments
|
|
From: Dave Mills <mills@udel.edu>
|
|
|
|
1999-12-03 Sven Dietrich <sven_dietrich@trimble.com>
|
|
|
|
* libntp/mexit.c: Moved WINNT port specific file to ports/winnt/libntp
|
|
* ports/winnt/libntp/libntp.dsp: Fix WinNT makefile for new source loc.
|
|
|
|
1999-12-03 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* libntp/Makefile.am (libntp_a_SOURCES): Lose mexit.c - Sven will
|
|
move it to the winnt port area.
|
|
|
|
1999-12-03 Sven Dietrich <sven_dietrich@trimble.com>
|
|
|
|
* libntp/systime.c: Removed adjtime hack for WINNT
|
|
* ports/winnt/ntpd/nt_clockstuff.c: Winnt double precision adjtime
|
|
* ports/winnt/inlcude/clockstuff.h: Remove no longer needed externs
|
|
|
|
1999-12-02 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* libparse/Makefile.in: Manually hacked to remove the
|
|
libparse_kernel.a.[co] cruft
|
|
|
|
* libparse/Makefile.am (k*.o): Generate these form the Makefile,
|
|
not from separate .c files
|
|
|
|
* html/tickadj.htm:
|
|
* html/notes.htm:
|
|
* html/hints/solaris.html:
|
|
Point to the new dosynctodr report.
|
|
|
|
* html/hints/solaris.xtra.S99ntpd:
|
|
Update. Should be rewritten to take advantage of the new -g
|
|
switch and perhaps a loop to wait until ntpd hits a reasonable
|
|
"state".
|
|
|
|
* html/hints/solaris-dosynctodr.html: New information
|
|
From: "John W. Sopko Jr." <sopko@cs.unc.edu>
|
|
|
|
1999-12-01 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* libntp/authkeys.c (auth_moremem): Clear memory allocated for sk.
|
|
From: Hugo Mildenberger <hugo.mildenberger@topmail.de>
|
|
|
|
1999-12-01 Sven Dietrich <sven_dietrich@trimble.com>
|
|
|
|
* libntp/recvbuff.c: Unused functions cleanup
|
|
* ntpd/ntpd.c: ProcessorAffinity, IO cleanup
|
|
* ports/winnt/instsrv/instsrv.c: Service name changed to NTP
|
|
|
|
NT port shouldn;t hop between CPUs. Set affinity to first processor.
|
|
Service name was NetworkTimeProtocol. Too long. Now NTP.
|
|
|
|
1999-12-01 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* scripts/plot_summary.pl: Improved option parsing. Fixed one
|
|
minor Perl compatibility error.
|
|
* scripts/summary.pl: Official revision for NTPv4: Parse new
|
|
statistic file formats correctly, provide error checking for bad
|
|
input files, and guard against negative arguments to sqrt()
|
|
because of numeric effects. Use one pattern to select valid
|
|
statistic files. Add selectable output directory
|
|
(``--output-directory'') and improved option parsing. Directory
|
|
with statistic files (now settable also with
|
|
``--input-directory'') defaults to ``/var/log/ntp''.
|
|
From: Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>
|
|
|
|
* html/driver8.htm:
|
|
* libparse/clk_computime.c:
|
|
* libparse/clk_dcf7000.c:
|
|
* libparse/clk_hopf6021.c:
|
|
* libparse/clk_meinberg.c:
|
|
* libparse/clk_rawdcf.c:
|
|
* libparse/clk_rcc8000.c:
|
|
* libparse/clk_schmid.c:
|
|
* libparse/clk_trimtaip.c:
|
|
* libparse/clk_trimtsip.c:
|
|
* libparse/data_mbg.c:
|
|
* libparse/kclk_computime.c:
|
|
* libparse/kclk_dcf7000.c:
|
|
* libparse/kclk_hopf6021.c:
|
|
* libparse/kclk_meinberg.c:
|
|
* libparse/kclk_rawdcf.c:
|
|
* libparse/kclk_rcc8000.c:
|
|
* libparse/kclk_schmid.c:
|
|
* libparse/kclk_trimtaip.c:
|
|
* libparse/kclk_trimtsip.c:
|
|
* libparse/kparse.c:
|
|
* libparse/kparse_conf.c:
|
|
* libparse/parse.c:
|
|
* libparse/parse_conf.c:
|
|
* libparse/parsesolaris.c:
|
|
* libparse/parsestreams.c:
|
|
* ntpd/refclock_parse.c:
|
|
Mods and updates
|
|
From: Frank Kardel <kardel <AT> acm.org>
|
|
|
|
* acconfig.h: PCF refclock
|
|
* configure.in:
|
|
* html/driver35.htm:
|
|
* html/refclock.htm:
|
|
* include/ntp.h:
|
|
* libntp/clocktypes.c:
|
|
* ntpd/Makefile.am:
|
|
* ntpd/ntp_control.c:
|
|
* ntpd/refclock_conf.c:
|
|
* ntpd/refclock_pcf.c:
|
|
From: Andreas Voegele <andreas.voegele@gmx.de>
|
|
|
|
* acconfig.h: DECL_STIME_1
|
|
|
|
* configure.in (iCFLAGS): Use -std1 for alpha*-dec-osf* if we are
|
|
using "cc".
|
|
Reported by: Tom Smith <smith@cag.lkg.dec.com>
|
|
|
|
1999-11-30 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* include/l_stdlib.h: DECL_SYSTIME_1 --- a long *
|
|
* configure.in: Use it for DEC OSF[45]
|
|
Reported by: Tom Smith <smith@cag.lkg.dec.com>
|
|
|
|
* ntpd/refclock_parse.c: Add missing declarations
|
|
* ntptrace/ntptrace.c: Ditto
|
|
* ntpd/ntp_proto.c: Ditto
|
|
* ntpd/refclock_palisade.c: Ditto
|
|
From: Jonathan Stone <jonathan@dsg.stanford.edu>
|
|
|
|
1999-11-18 Sven Dietrich <sven_dietrich@trimble.com>
|
|
* Win NT port updates
|
|
* ntpd.dsp: makefile only builds supported refclocks
|
|
* config.h: cleanup, undefine unsupported clock_atom
|
|
* win32_io, clock_NMEA: foundation for future refclock support
|
|
* recvbuff, transmitbuff, IOcompletionport: streamline packet handler
|
|
* html/hints/winnt.htm: Added up-to-date html docs for WINNT
|
|
|
|
1999-11-17 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* html/copyright.htm: Credit Jack for his work.
|
|
|
|
* html/pic/*: Save a *ton* of space on the pictures.
|
|
From: Jack Sasportas <jack@innovativeinternet.com>
|
|
|
|
1999-11-16 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in : changequote for osf[45] test.
|
|
Reported by: Tom Smith <smith@cag.lkg.dec.com>
|
|
|
|
* ntp_update: Ignore stuff in any A.* directory.
|
|
|
|
1999-11-15 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: Clean up header checks for sys/syssgi.h and
|
|
sys/select.h . Originally, we did not check for sys/select.h
|
|
under some versions of SCO (see xntp3-5). Somewhere in ntp4 we
|
|
dropped the SCO check and added the check for sys/syssgi.h,
|
|
exclusive of checking for sys/select.h. Marc Brett can't think of
|
|
a reason why we should not be checking for sys/select.h, so let's
|
|
look for it now.
|
|
|
|
1999-11-13 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpdate/ntpdate.c: Add the ability for ntpdate to query a
|
|
multicast address. We use the response to the multicast address
|
|
to learn new servers which we then add to the peer list and query.
|
|
In changing this I made the list of peers a linked list.
|
|
|
|
To be complete I should detect a broadcast address and make it
|
|
behave the same way. But that requires a scan of the interface
|
|
list which is more complicated that I want to deal with...
|
|
|
|
Fix a bug, allowing ntpdate to compile if SLEWALWAYS and STEP_SLEW
|
|
are both defined.
|
|
|
|
From: Jeffrey C Honig <jch@bsdi.com>
|
|
|
|
* ntpd/ntp_refclock.c: sys/sio.h and SCO5_CLOCK cleanup
|
|
From: Kamal A Mostafa <kamal@whence.com>
|
|
|
|
* ntpd/ntp_loopfilter.c: Let -g do a "correct any" for the first
|
|
time adjustment.
|
|
From: Dave Mills <mills@udel.edu>
|
|
|
|
* configure.in: sys/sio.h needs to be checked independently.
|
|
Reported by: Kamal A Mostafa <kamal@whence.com>
|
|
|
|
1999-11-11 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.98f
|
|
|
|
* configure.in: DECL_PLOCK_0 and DECL_STIME_0 are for dec-osf5*, too
|
|
* ntpd/ntpd.c: DEC OSF cleanup (editorial comments by HMS)
|
|
From: Tom Smith <smith@cag.lkg.dec.com>
|
|
|
|
* ntpd/ntp_refclock.c: MAXUNIT bugfix
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
* ntpd/ntp_refclock.c:
|
|
* ntpd/ntpd.c:
|
|
* ntpd/refclock_arc.c:
|
|
* ntpd/refclock_as2201.c:
|
|
* ntpd/refclock_atom.c:
|
|
* ntpdc/ntpdc.c:
|
|
* ntpq/ntpq.c:
|
|
Code cleanup.
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
* include/ntp_stdlib.h:
|
|
* libntp/systime.c:
|
|
* ntpd/ntp_proto.c:
|
|
Replaced the 'sco5_oldclock' variable with 'systime_10ms_ticks'.
|
|
Cleared libntp/systime.c and include/ntp_stdlib.h of references
|
|
to SCO5_CLOCK and RELIANTUNIX_CLOCK (moved to ntpd/ntp_proto.c).
|
|
From: Kamal A Mostafa <kamal@whence.com>
|
|
|
|
* configure.in: alpha-dec-osf4* -> alpha*-dec-osf4*|alpha*-dec-osf5*
|
|
From: Tom Smith <smith@cag.lkg.dec.com>
|
|
|
|
* configure.in: Look for <sys/sio.h>. If TIOCDCDTIMESTAMP is
|
|
there, we have TTYCLK.
|
|
* acconfig.h: Lose old AIOCTIMESTAMP stuff
|
|
Reported by: Kamal A Mostafa <kamal@whence.com>
|
|
|
|
1999-11-10 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntpd.c (set_process_priority): Clean up nice() and setpriority()
|
|
|
|
1999-11-09 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* Makefile.am (EXTRA_DIST): Added README.cvs
|
|
Reported by: Kamal A Mostafa <kamal@whence.com>
|
|
|
|
1999-11-08 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.98e
|
|
|
|
1999-11-07 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: Lose AIOCTIMESTAMP tests
|
|
|
|
* ntpd/ntpd.c: lose select() EINTR debug warning
|
|
* ntpd/ntp_refclock.c: AIOCTIMESTAMP -> TIOCDCDTIMESTAMP. Watch
|
|
CLK_SETSTR.
|
|
* ntpd/refclock_atom.c: fdpps is only there for PPS or PPSAPI.
|
|
AIOCTIMESTAMP is gone now.
|
|
From: Kamal A Mostafa <kamal@whence.com>
|
|
|
|
* configure.in (HAVE_MLOCKALL): Deal with dec-osf5 realities
|
|
* ntpd/refclock_ulink.c (ulink_poll): Fix cast.
|
|
* libntp/machines.c (ntp_set_tod): Use a long* for the argument to
|
|
stime().
|
|
Reported by: Tom Smith <smith@cag.lkg.dec.com>
|
|
|
|
* ntpd/ntpd.c (set_process_priority): Use whatever we have until
|
|
something works.
|
|
|
|
* ntpd/ntp_loopfilter.c: Keep clock_frequency changes in a temp
|
|
variable so we can record it to loopstats (near as HMS can tell).
|
|
From: Dave Mills <mills@udel.edu>
|
|
|
|
1999-11-06 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* acconfig.h: RELIANTUNIX_CLOCK
|
|
* configure.in (ac_cv_var_tickadj): RELIANTUNIX_CLOCK
|
|
* libntp/systime.c (adj_systime): Reliant patches
|
|
From: Andrej Borsenkow <Andrej.Borsenkow@mow.siemens.ru>
|
|
|
|
1999-11-05 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_parse.c (parse_start): ASYNC_PPS_CD_NEG cleanup
|
|
* configure.in (ac_cv_make_ntptime): OK on Linux
|
|
From: <Ulrich.Windl@rz.uni-regensburg.de>
|
|
|
|
* configure.in: NetBSD has PPSAPI now
|
|
F_SETOWN is needed for NetBSD
|
|
From: Jonathan Stone <jonathan@dsg.stanford.edu>
|
|
|
|
1999-11-02 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.98d
|
|
|
|
* ntpd/refclock_parse.c: Cleanup/fixes
|
|
From: John Hay <jhay@mikom.csir.co.za>
|
|
|
|
* ntpd/refclock_parse.c: Lose #include "ntp_select.h"
|
|
* ntpd/ntpd.c: Lose #include "ntp_select.h"
|
|
* ntpd/ntp_io.c: Lose #include "ntp_select.h"
|
|
* ntpd/ntp_intres.c: Lose #include "ntp_select.h"
|
|
* libntp/iosignal.c: Lose #include "ntp_select.h"
|
|
* include/ntpd.h: #include "ntp_select.h" for declaration of activefds
|
|
Reported by: Christian Krackowizer <kra1@technodat.co.at>
|
|
|
|
1999-11-01 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.98c
|
|
|
|
* libntp/syssignal.c: Don't warn about SA_RESTART
|
|
* libntp/recvbuff.c: Fix free buffer count
|
|
From: Jeffrey C Honig <jch@bsdi.com>
|
|
|
|
* html/pps.htm:
|
|
* html/howto.htm:
|
|
* html/confopt.htm:
|
|
* html/clockopt.htm:
|
|
* html/uthopt.htm:
|
|
Updates.
|
|
From: Dave Mills <mills@udel.edu>
|
|
|
|
* ntpd/refclock_wwvb.c: burst fixes
|
|
* ntpd/refclock_ulink.c: burst fixes
|
|
* ntpd/refclock_tpro.c: burst and NSTAGE fixes
|
|
* ntpd/refclock_pst.c: burst fixes
|
|
* ntpd/refclock_irig.c: SAMPLE -> SAMPLES
|
|
* ntpd/refclock_heath.c: burst fixes
|
|
* ntpd/refclock_dumbclock.c: burst fixes
|
|
* ntpd/refclock_chronolog.c: burst fixes
|
|
* ntpd/refclock_bancomm.c: burst fixes
|
|
* ntpd/refclock_atom.c: burst fixes
|
|
* ntpd/refclock_as2201.c: burst fixes
|
|
* ntpd/ntp_refclock.c: PPSAPI, code, and comment cleanup/fixes
|
|
* ntpd/ntp_proto.c: Broadcast/restrict cleanup
|
|
* ntpd/ntp_loopfilter.c: Cleanup and fixes
|
|
* libntp/gpstolfp.c: Lose the UL qualifiers - old compilers hate them
|
|
From: Dave Mills <mills@udel.edu>
|
|
|
|
1999-10-31 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: TIOCSPPS cleanup
|
|
|
|
1999-10-20 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.98b
|
|
|
|
* ntpd/refclock_atom.c: AIOCTIMESTAMP patch
|
|
* ntpd/ntpd.c: SCO clock patch
|
|
* ntpd/ntp_request.c: noselect patch
|
|
* ntpd/ntp_refclock.c: AIOCTIMESTAMP patch
|
|
* ntpd/ntp_proto.c: noselect patch
|
|
* ntpd/ntp_intres.c: noselect patch
|
|
* ntpd/ntp_config.c: noselect patch
|
|
* include/ntp_request.h: noselect patch
|
|
* include/ntp.h: noselect patch
|
|
From: Kamal A Mostafa <kamal@whence.com>
|
|
|
|
* configure.in:
|
|
* acconfig.h: TTYCLK_AIOCTIMESTAMP
|
|
Stuff for Kamal
|
|
|
|
* ntpd/refclock_atom.c (atom_pps): make "result" initialization
|
|
uglier, but more bulletproof.
|
|
|
|
* configure.in (sys/timepps.h): Fixed.
|
|
From: John Hay <jhay@mikom.csir.co.za>
|
|
|
|
1999-10-19 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_oncore.c: Rename instance.state to instance.o_state
|
|
|
|
* refclock_oncore.c:
|
|
* refclock_mx4200.c:
|
|
* refclock_chu.c:
|
|
* refclock_atom.c:
|
|
* ntp_refclock.c:
|
|
* ntp_peer.c:
|
|
* ntp_loopfilter.c:
|
|
* include/ntp_refclock.h:
|
|
Various cleanup and fixes
|
|
From: Dave Mills <mills@udel.edu>
|
|
|
|
1999-10-17 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_config.c (CONFIG_FILE): NT changes
|
|
From: Sven Dietrich <Sven_Dietrich@trimble.com>
|
|
|
|
1999-10-16 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: sys/timepps.h verification changes
|
|
|
|
* ntpd/refclock_atom.c (atom_poll): PPS cleanup
|
|
From: Dave Mills <mills@udel.edu>
|
|
(atom_pps): Portability patch
|
|
From: John Hay <jhay@mikom.csir.co.za>
|
|
|
|
|
|
* libntp/msyslog.c:
|
|
* libntp/gpstolfp.c:
|
|
Lint cleanup
|
|
From: Jonathan Stone <jonathan@dsg.stanford.edu>
|
|
|
|
* parseutil/dcfd.c: abs() -> l_abs(), time.h (AIX 4.3.2 patches)
|
|
From: Dana Kaempen <decay@flash.net>
|
|
|
|
* ntpd/refclock_oncore.c:
|
|
* ntpd/refclock_atom.c:
|
|
* ntpd/ntp_refclock.c:
|
|
PPS cleanup
|
|
From: John.Hay@mikom.csir.co.za
|
|
|
|
* util/ntptime.c:
|
|
* ntpdate/ntptimeset.c:
|
|
* ntpdate/ntpdate.c:
|
|
* ntpd/refclock_trak.c:
|
|
* ntpd/refclock_oncore.c:
|
|
* ntpd/refclock_mx4200.c:
|
|
* ntpd/refclock_msfees.c:
|
|
* ntpd/refclock_atom.c:
|
|
* ntpd/ntp_control.c:
|
|
* ntpd/ntp_config.c:
|
|
* configure.in:
|
|
* configure:
|
|
PPS, Solaris 7, cleanup patches
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
* ports/winnt/ntptrace/ntptrace.dsp:
|
|
* ports/winnt/ntpq/ntpq.dsp:
|
|
* ports/winnt/ntpdc/ntpdc.dsp:
|
|
* ports/winnt/ntpdate/ntpdate.dsp:
|
|
* ports/winnt/ntpd/refclock_trimbledc.c:
|
|
* ports/winnt/ntpd/ntpd.dsp:
|
|
* ports/winnt/ntpd/ntp_iocompletionport.c:
|
|
* ports/winnt/ntpd/nt_clockstuff.c:
|
|
* ports/winnt/libntp/util_clockstuff.c:
|
|
* ports/winnt/libntp/libntp.dsp:
|
|
* ports/winnt/libntp/SetSystemTime.c:
|
|
* ports/winnt/instsrv/instsrv.c:
|
|
* ports/winnt/include/sys/ioctl.h:
|
|
* ports/winnt/include/termios.h:
|
|
* ports/winnt/include/config.h:
|
|
* ports/winnt/include/clockstuff.h:
|
|
* ports/winnt/ntp.dsw:
|
|
* ntpd/refclock_shm.c:
|
|
* ntpd/refclock_palisade.c:
|
|
* ntpd/ntpd.c:
|
|
* ntpd/ntp_timer.c:
|
|
* ntpd/ntp_refclock.c:
|
|
* libntp/systime.c:
|
|
* libntp/machines.c:
|
|
NT patches
|
|
From: Sven Dietrich <Sven_Dietrich@trimble.com>
|
|
|
|
1999-10-15 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_wwvb.c:
|
|
* ntpd/refclock_usno.c:
|
|
* ntpd/refclock_ulink.c:
|
|
* ntpd/refclock_tpro.c:
|
|
* ntpd/refclock_pst.c:
|
|
* ntpd/refclock_parse.c:
|
|
* ntpd/refclock_palisade.c:
|
|
* ntpd/refclock_oncore.c:
|
|
* ntpd/refclock_mx4200.c:
|
|
* ntpd/refclock_msfees.c:
|
|
* ntpd/refclock_jupiter.c:
|
|
* ntpd/refclock_irig.c:
|
|
* ntpd/refclock_heath.c:
|
|
* ntpd/refclock_chu.c:
|
|
* ntpd/refclock_atom.c:
|
|
* ntpd/refclock_as2201.c:
|
|
* ntpd/refclock_arc.c:
|
|
* ntpd/refclock_arbiter.c:
|
|
* ntpd/refclock_acts.c:
|
|
* ntpd/ntp_refclock.c:
|
|
* include/ntp_refclock.h:
|
|
Bunches of fixes.
|
|
From: Dave Mills <mills@udel.edu>
|
|
|
|
1999-10-10 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* html/driver16.htm: New version
|
|
* ntpd/refclock_bancomm.c: New version
|
|
From: "Cliff, Gary" <gary.cliff@cdott.com>
|
|
"Ramasivan, Ganesh" <ganesh.ramasivan@cdott.com>
|
|
|
|
* ntpd/refclock_ulink.c (ulink_receive): Cleanup
|
|
(ulink_poll): Cleanup
|
|
* ntpd/refclock_atom.c (atom_pps): SunOS timespec/timeval cleanup
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
* INSTALL: Point NT folks at ports/winnt
|
|
Reported by: Stephen Gildea <gildea@intouchsys.com>
|
|
|
|
* include/ntp_stdlib.h: Noise abatement
|
|
* include/ntpd.h: Noise abatement
|
|
Reported by: "W. David Higgins" <wdh@grouper.ccur.com>
|
|
|
|
* configure.in: DECL_STDIO_0 with gcc under solaris.
|
|
|
|
* include/l_stdlib.h: DECL_TOUPPER_0
|
|
DECL_STRERROR_0
|
|
|
|
* configure.in: Fix a bunch of implicit declarations for SunOS
|
|
|
|
* html/release.htm: cleanup - we still provide MD5.
|
|
Reported by: Winslowe Lacesso <lacesso@cs.ubc.ca>
|
|
|
|
1999-10-09 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_oncore.c:
|
|
* ntpd/refclock_atom.c:
|
|
* ntpd/ntp_refclock.c:
|
|
PPS API code updated to the current spec
|
|
From: Dave Mills
|
|
|
|
* configure.in (ac_cv_make_tickadj): Don't make tickadj starting
|
|
with solaris2.5
|
|
Requested by: Dave Mills
|
|
|
|
1999-10-04 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: We might need -lsocket for the -lnsl check.
|
|
|
|
1999-09-19 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_ulink.c: Typos in C++ comment
|
|
Reported by: Thomas.Tornblom@Sun.SE
|
|
|
|
* configure.in: 4.0.98a
|
|
|
|
* ntpd/ntp_config.c (getconfig): Fix typo.
|
|
From: "David E. Myers" <dem@skyline.rtp.nc.us>
|
|
From: David Godfrey <dave@delta.demon.co.uk>
|
|
From: Geoffrey Sisson <geoff@nominet.org.uk>
|
|
|
|
1999-09-17 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.98
|
|
|
|
NetInfo support:
|
|
|
|
* config.guess
|
|
* config.sub
|
|
Add Mac OS (versions 10 and up).
|
|
|
|
* acconfig.h
|
|
* config.h.in
|
|
* configure.in
|
|
Check for NetInfo API; add HAVE_NETINFO macro and friends.
|
|
|
|
* include/ntp.h
|
|
* ntpd/ntp_config.c
|
|
* ntpdate/ntpdate.c
|
|
Add support for reading configuration from NetInfo.
|
|
|
|
* ntpd/ntp_config.c
|
|
Get rid of unnecessary eol variable in tokenizer.
|
|
|
|
* html/notes.htm
|
|
* html/ntpd.htm
|
|
* html/ntpdate.htm
|
|
Document NetInfo functionality.
|
|
|
|
* util/tickadj.c
|
|
Use HAVE_KVM_OPEN conditional around kvm.h include.
|
|
|
|
From: Wilfredo Sanchez <wsanchez@apple.com>
|
|
|
|
1999-09-15 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* acconfig.h:
|
|
* config.h.in:
|
|
* configure.in:
|
|
* html/driver34.htm:
|
|
* html/refclock.htm:
|
|
* include/ntp.h:
|
|
* libntp/clocktypes.c:
|
|
* ntpd/Makefile.am:
|
|
* ntpd/ntp_control.c:
|
|
* ntpd/refclock_conf.c:
|
|
* ntpd/refclock_ulink.c:
|
|
Ultralink driver
|
|
From: Dave Strout <dstrout@linuxfoundary.com>
|
|
|
|
1999-09-14 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: ReliantUNIX patches
|
|
From: Andrej Borsenkow <Andrej.Borsenkow@mow.siemens.ru>
|
|
|
|
* ntpd/refclock_atom.c: PPS cleanup
|
|
* ntpd/ntp_refclock.c (refclock_ioctl): PPS cleanup
|
|
From: Dave Mills <mills@udel.edu>
|
|
|
|
* ntptrace/ntptrace.c (ReceiveBuf): addserver() can return NIL.
|
|
Reported by: "Alan J. Wylie" <alanw@cyrano.com>
|
|
|
|
* libntp/ieee754io.c:
|
|
* ntpd/ntp_proto.c:
|
|
* ntpd/ntp_refclock.c:
|
|
Lint cleanup.
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
1999-09-12 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_refclock.c (refclock_ioctl): Declaration cleanup.
|
|
|
|
* ntpd/ntp_proto.c (init_proto): msyslog kern_enable at LOG_DEBUG.
|
|
|
|
* ntpd/refclock_atom.c: Add missing declaration.
|
|
|
|
1999-09-11 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (ac_cv_make_ntptime): Just look for struct
|
|
ntptimeval, not timespec or nsec (Solaris 2.7 should get ntptime
|
|
and it uses msec).
|
|
(ac_cv_var_oncore_ok): Reorder so it's a "normal" clock
|
|
|
|
* configure.in: Solaris Kernel FLL bug fixed in 106541-07
|
|
|
|
1999-09-02 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.97f
|
|
|
|
* ntptrace/ntptrace.c:
|
|
* ntpdate/ntptimeset.c:
|
|
* ntpdate/ntptime_config.c:
|
|
* ntpdate/ntpdate.c:
|
|
* util/ntptime.c:
|
|
* parseutil/dcfd.c:
|
|
* libparse/parsestreams.c:
|
|
* libparse/parse_conf.c:
|
|
* libparse/parse.c:
|
|
* libparse/clk_varitext.c:
|
|
* libparse/clk_trimtsip.c:
|
|
* libparse/clk_trimtaip.c:
|
|
* libparse/clk_schmid.c:
|
|
* libparse/clk_rcc8000.c:
|
|
* libparse/clk_rawdcf.c:
|
|
* libparse/clk_meinberg.c:
|
|
* libparse/clk_hopf6021.c:
|
|
* libparse/clk_dcf7000.c:
|
|
* libparse/clk_computime.c:
|
|
* libntp/msyslog.c:
|
|
* libntp/iosignal.c:
|
|
* libntp/syssignal.c:
|
|
* adjtimed/adjtimed.c:
|
|
* ntpd/refclock_shm.c:
|
|
* ntpd/refclock_parse.c:
|
|
* ntpd/refclock_palisade.c:
|
|
* ntpd/refclock_mx4200.c:
|
|
* ntpd/refclock_jupiter.c:
|
|
* ntpd/refclock_datum.c:
|
|
* ntpd/ntpd.c:
|
|
* ntpd/ntp_util.c:
|
|
* ntpd/ntp_timer.c:
|
|
* ntpd/ntp_request.c:
|
|
* ntpd/ntp_refclock.c:
|
|
* ntpd/ntp_monitor.c:
|
|
* ntpd/ntp_loopfilter.c:
|
|
* ntpd/ntp_io.c:
|
|
* ntpd/ntp_intres.c:
|
|
* ntpd/ntp_filegen.c:
|
|
* include/l_stdlib.h:
|
|
<errno.h> and errno declaration cleanup.
|
|
|
|
* ntpd/map_vme.c: cleanup some spacing.
|
|
|
|
1999-09-01 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.97e
|
|
|
|
* configure.in (ac_cv_struct_sigaction_has_sa_sigaction):
|
|
* acconfig.h: Ditto
|
|
* parseutil/dcfd.c (main): Use it.
|
|
From: HOSAKA Eiichi <HOSAKA.Eiichi@dd.anritsu.co.jp>
|
|
|
|
1999-08-29 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.97d
|
|
|
|
* include/ntp_stdlib.h: Clean up previous NeXT patch.
|
|
From: Jack Bryans <jbryans@csulb.edu>
|
|
|
|
* ntpd/refclock_parse.c: Permit RTS to power a DCF77.
|
|
From: Carsten Paeth <calle@calle.in-berlin.de>
|
|
|
|
* ntpd/refclock_oncore.c (oncore_start): This makes the Oncore run
|
|
on systems without hardpps().
|
|
From: Poul-Henning Kamp <phk@freebsd.org>
|
|
|
|
1999-08-28 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.97c
|
|
|
|
* configure.in (ac_cv_make_ntptime): Typo.
|
|
From: Ulrich Windl <ulrich.windl@rz.uni-regensburg.de>
|
|
|
|
1999-08-26 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.97b
|
|
|
|
* libntp/iosignal.c:
|
|
* ntpd/ntp_peer.c:
|
|
* ntpd/refclock_nmea.c:
|
|
* ntpdate/ntptime_config.c:
|
|
* ntpdate/ntptimeset.c:
|
|
AIX, Irix, and SunOS lint cleanup
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
1999-08-24 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in 4.0.97a
|
|
|
|
* configure.in (AC_OUTPUT): added scripts/Makefile
|
|
* Makefile.am (SUBDIRS): Added scripts
|
|
* scripts/Makefile.am: Added
|
|
|
|
1999-08-23 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_nmea.c: Patches for:
|
|
Trimble OEM Ace-II receiver. Low cost PCB with single
|
|
voltage input, external active antenna and two serial
|
|
ports with either NMEA and ITAPs output. Programmable
|
|
to be tuned for 'time' accuracy in fixed station config.
|
|
From: Nick Hibma <nick.hibma@jrc.it>
|
|
|
|
1999-08-21 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_config.c: Added listen_to_virtual_ips support (-L flag)
|
|
* ntpd/ntp_io.c: Ditto
|
|
|
|
1999-08-19 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_intres.c (request): Lint cleanup
|
|
* ntpd/ntp_control.c (ctl_putclock): Ditto
|
|
* libntp/recvbuff.c (getrecvbufs): Ditto
|
|
(get_free_recv_buffer): Ditto
|
|
* libntp/systime.c (adj_systime): Ditto
|
|
|
|
1999-08-18 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.97
|
|
|
|
* libntp/systime.c:
|
|
* ntpd/ntp_loopfilter.c:
|
|
* ntpd/ntpd.c:
|
|
* ports/winnt/libntp/nt_clockstuff.c:
|
|
From: Sven Dietrich <Sven_Dietrich@trimble.com>
|
|
|
|
* README.cvs: Updated.
|
|
|
|
* configure.in:
|
|
* include/ntp_machine.h:
|
|
* libntp/mexit.c:
|
|
* ntpd/ntp_config.c:
|
|
* ntpd/ntp_peer.c:
|
|
* ntpd/ntp_restrict.c:
|
|
* ntpd/refclock_arc.c:
|
|
* ntpdate/ntpdate.c:
|
|
Irix, SunOS, AIX, lint patches
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
* util/ansi2knr.c: New release (fix for bug reported by Marc Brett)
|
|
From: "L. Peter Deutsch" <ghost@aladdin.com>
|
|
|
|
* include/ntp_stdlib.h: NeXT portability patch
|
|
From: Jack Bryans <jbryans@csulb.edu>
|
|
|
|
* configure.in:
|
|
* dot.emacs: (cleanup)
|
|
* ntpdate/Makefile.am:
|
|
* ntpdate/ntpdate.h:
|
|
* ntpdate/ntptime_config.c:
|
|
* ntpdate/ntptimeset.c:
|
|
ntptimeset patches.
|
|
From: Jeffrey Hutzelman <jhutz@cmu.edu>
|
|
|
|
* ntpd/refclock_parse.c (local_input): ts.l_ui -> ts.fp.l_ui
|
|
|
|
1999-08-11 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.96p1
|
|
|
|
* ntpd/ntpd.c (sys/resource.h): Include this file only #if
|
|
HAVE_SYS_RESOURCE_H.
|
|
(set_process_priority): Use TIOCNOTTY only if it is #define'd.
|
|
* ntpd/refclock_parse.c (STREAM): STREAM does not imply HAVE_TERMIOS.
|
|
(termios.h, termio.h, fcntl.h): Do not include those files here;
|
|
they are already included by ntp_refclock.h or ntp_io.h.
|
|
* ntpd/refclock_leitch.c (sgtty.h, termios.h, termio.h): Do not
|
|
include those files here; they are already included by ntp_refclock.h.
|
|
* ntpdate/ntpdate.c (sys/resource.h) : Include that file only #if
|
|
HAVE_RESOURCE_H.
|
|
From: Philippe De Muyter <phdm@macqel.be>
|
|
|
|
* ntptrace/ntptrace.c (input_handler): Make it a "normal" function
|
|
definition.
|
|
Reported by: GIANNI_CATANIA@hp-italy-om6.om.hp.com
|
|
|
|
* configure.in: pc-cygwin32 -> pc-cygwin* because of a change in
|
|
B20.
|
|
From: Stephen Gildea <gildea@intouchsys.com>
|
|
|
|
1999-08-09 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.96
|
|
|
|
* parseutil/dcfd.c (main): Replace SA_ONSTACK and SV_ONSTACK with
|
|
HAVE_SIGACTION and HAVE_SIGVEC, respectively. HP-UX provides both
|
|
of the former but only one of the latter...
|
|
|
|
1999-08-08 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: Better tests for -lnsl and -lsocket
|
|
From: Albert Chin-A-Young <china@thewrittenword.com>
|
|
|
|
Works for me - handle openlog() and -lgen the same way.
|
|
|
|
* Makefile.am (EXTRA_DIST): Add in the y2k notes
|
|
|
|
* parseutil/dcfd.c: Renamed drift_comp to accum_drift
|
|
|
|
* configure.in: Added MAKE_CHECK_Y2K support; check_y2k needs libparse.
|
|
* ntpd/Makefile.am (check_PROGRAMS): Use MAKE_CHECK_Y2K
|
|
* ntpd/Makefile.am (check-local): Added.
|
|
* parseutil/Makefile.am (check-local): Added.
|
|
|
|
* include/ntp.h: Y2KFixes
|
|
* libparse/parse.c: Ditto
|
|
* ntpd/Makefile.am (check_PROGRAMS): Ditto
|
|
* ntpd/refclock_acts.c: Ditto
|
|
* ntpd/refclock_arc.c (arc_receive): Ditto
|
|
* ntpd/refclock_heath.c: Ditto
|
|
* ntpd/refclock_hpgps.c: Ditto
|
|
* parseutil/Makefile.am (check-local): Ditto
|
|
* parseutil/dcfd.c (check_y2k): Ditto
|
|
* NOTES.y2kfixes: Ditto
|
|
* readme.y2kfixes: Ditto
|
|
* results.y2kfixes: Ditto
|
|
* ntpd/check_y2k.c: Ditto
|
|
From: y2k@y2k.labs.att.com
|
|
|
|
1999-08-07 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: Look for sys/ppstime.h.
|
|
|
|
1999-07-31 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_io.c (create_sockets): Typo.
|
|
From: Doug Wells <dmw@contek.com>
|
|
|
|
1999-07-29 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (ac_cv_struct_ntptimeval): Explicitly look for
|
|
struct ntptimeval.
|
|
(ac_cv_var_kernel_pll): Require struct ntptimeval.
|
|
Linux. Grrr.
|
|
Reported by: Ronald Kuetemeier <ronaldk@smginc.com>
|
|
|
|
1999-07-27 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.95
|
|
|
|
* ports/winnt: New release
|
|
From: Sven Dietrich <Sven_Dietrich@trimble.com>
|
|
|
|
1999-07-26 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* libntp/machines.c (ntp_set_tod): Bugfix
|
|
From: Andrej Borsenkow <Andrej.Borsenkow@mow.siemens.ru>
|
|
|
|
1999-07-25 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.94b
|
|
|
|
* acconfig.h:
|
|
* configure.in:
|
|
* libparse/Makefile.am:
|
|
* libparse/parse_conf.c:
|
|
* libparse/clk_varitext.c:
|
|
* libparse/kclk_varitext.c:
|
|
* ntpd/refclock_parse.c: VARITEXT parse clock
|
|
* ntpdate/ntpdate.c: bugfix
|
|
From: Tony McConnell <tonym@datel-technology.co.uk>
|
|
|
|
1999-07-24 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* include/ntp_syscall.h (ntp_gettime): Make it static
|
|
* configure.in: Added AC_C_INLINE
|
|
Reported by: "Charles C. Fu" <ccwf@klab.caltech.edu>
|
|
|
|
1999-07-23 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* include/ntpd.h:
|
|
* libntp/machines.c:
|
|
* libntp/systime.c:
|
|
* ntpd/ntp_config.c:
|
|
* ntpd/ntp_filegen.c:
|
|
* ntpd/ntp_io.c:
|
|
* ntpd/ntp_proto.c:
|
|
* ntpd/ntp_timer.c:
|
|
* ntpdate/ntpdate.c: Windows NT port cleanup
|
|
From: Sven Dietrich <Sven_Dietrich@trimble.com>
|
|
|
|
1999-07-22 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* libntp/authkeys.c:
|
|
* libntp/ieee754io.c:
|
|
* libntp/iosignal.c:
|
|
* libntp/machines.c:
|
|
* libntp/mexit.c:
|
|
* libntp/recvbuff.c:
|
|
* ntpd/ntp_filegen.c:
|
|
* ntpd/ntp_loopfilter.c:
|
|
* ntpd/ntp_request.c:
|
|
* ntpd/ntp_timer.c:
|
|
* ntpd/ntpd.c: Compile/lint cleanup
|
|
From: Allen Smith <easmith@beatrice.rutgers.edu>
|
|
|
|
1999-07-21 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.94a
|
|
|
|
* configure.in (ac_cv_make_ntptime): Add tv_nsec check.
|
|
|
|
* include/Makefile.am (noinst_HEADERS): Forgot ntp_syscall.h
|
|
From: John.Hay@mikom.csir.co.za
|
|
|
|
* configure.in: 4.0.94
|
|
|
|
* Makefile.am (SUBDIRS): librsaref
|
|
(dist-hook): Lose CVS subdirs in the distribution tarball
|
|
|
|
* include/Makefile.am (noinst_HEADERS): Added iosignal.h, recvbuff.h
|
|
|
|
* Makefile.am (dist-hook): Don't call dos2unix anymore
|
|
|
|
1999-07-20 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* acconfig.h:
|
|
* util/ntptime.c: FreeBSD nano patches
|
|
From: Per Hedeland <per@erix.ericsson.se> and
|
|
Allen Smith <easmith@beatrice.rutgers.edu>
|
|
|
|
* include/ntp.h:
|
|
include/ntp_fp.h:
|
|
include/ntp_io.h:
|
|
include/ntp_machine.h:
|
|
include/ntp_refclock.h:
|
|
include/ntp_stdlib.h:
|
|
include/ntpd.h:
|
|
libntp/Makefile.am:
|
|
libntp/emalloc.c:
|
|
libntp/machines.c:
|
|
libntp/mexit.c:
|
|
libntp/msyslog.c:
|
|
libntp/statestr.c:
|
|
libntp/syssignal.c:
|
|
libntp/systime.c:
|
|
libparse/parse.c:
|
|
libparse/parse_conf.c:
|
|
ntpd/ntp_control.c:
|
|
ntpd/ntp_intres.c:
|
|
ntpd/ntp_io.c:
|
|
ntpd/ntp_proto.c:
|
|
ntpd/ntp_refclock.c:
|
|
ntpd/ntp_request.c:
|
|
ntpd/ntp_timer.c:
|
|
ntpd/ntp_util.c:
|
|
ntpd/ntpd.c:
|
|
ntpd/refclock_nmea.c:
|
|
ntpd/refclock_palisade.c:
|
|
ntpd/refclock_palisade.h:
|
|
ntpd/refclock_shm.c:
|
|
ntpdate/ntpdate.c:
|
|
ntptrace/ntptrace.c: Cleanup
|
|
* libntp/recvbuff.c:
|
|
libntp/iosignal.c:
|
|
include/iosignal.h:
|
|
include/recvbuff.h: Added
|
|
From: Sven_Dietrich@Trimble.COM
|
|
|
|
* README: Add README.cvs
|
|
|
|
* configure.in (ac_cv_var_struct_ntptime_val_timespec): Typo.
|
|
From: John Hay <jhay@mikom.csir.co.za>
|
|
|
|
1999-07-19 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* Makefile.am (EXTRA_DIST): Lose ntpmak; "build" does a better job.
|
|
|
|
* ntpq/Makefile.am (version.o): Use mkver
|
|
* ntptrace/Makefile.am (version.o): Ditto
|
|
* ntpdate/Makefile.am (version.o): Ditto
|
|
* ntpd/Makefile.am (version.o): Ditto
|
|
* ntpdc/Makefile.am (version.o): Ditto
|
|
|
|
* configure.in (AC_OUTPUT): scripts/mkver
|
|
|
|
* scripts/mkver.in: Created. Note RSAREF in the version string
|
|
|
|
1999-07-18 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* README.des: Updated.
|
|
|
|
* ntpq/Makefile.am (LDADD): Add LIBRSAREF
|
|
|
|
* ntpdc/Makefile.am (LDADD): Add LIBRSAREF
|
|
|
|
* ntpdate/Makefile.am (LDADD): Add LIBRSAREF
|
|
|
|
* ntpd/Makefile.am (LDADD): Add LIBRSAREF
|
|
|
|
* configure.in (AC_OUTPUT): Added librsaref/Makefile
|
|
Added tests for making/using librsaref.a
|
|
Lose old DES stuff; AC_DEFINE(DES) if we find the rsaref stuff.
|
|
|
|
1999-07-11 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_trak.c (trak_receive): disambiguate expression.
|
|
At least now it is unambiguous. It may even still be correct.
|
|
Reported by: Tom Smith <smith@cag.lkg.dec.com>
|
|
|
|
* ntp_update (UPDATE_OPTIONS): Typo.
|
|
|
|
1999-07-07 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntp_update: Check out copyright.htm before COPYRIGHT
|
|
|
|
* ntpd/ntp_config.c: Support for PPS assert/clear/hardpps
|
|
* ntpd/ntp_refclock.c (refclock_ioctl): Ditto
|
|
(refclock_gtlin): Ditto
|
|
* html/clockopt.htm: Document.
|
|
From: John Hay <jhay@mikom.csir.co.za>
|
|
|
|
* html/monopt.htm: We have four types of files now
|
|
* ntpd/refclock_oncore.c: If debug is on, tell when
|
|
we are waiting for a valid almanac
|
|
From: Poul-Henning Kamp <phk@critter.freebsd.dk>
|
|
|
|
* include/ntp_machine.h (HAVE_TERMIOS): STREAMS does not imply
|
|
HAVE_TERMIOS !!!
|
|
* include/parse.h (timercmp): Macro defined if needed.
|
|
* ntpd/ntp_config.c (SIGCHLD): Macro defined as SIGCLD if needed.
|
|
(sys/wait.h): File included only if HAVE_SYS_WAIT_H.
|
|
* configure.in (sys/wait.h): File added to AC_CHECK_HEADERS list.
|
|
From: Philippe De Muyter <phdm@macqel.be>
|
|
|
|
1999-06-23 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_irig.c (irig_debug): NetBSD patches
|
|
From: Frederick Bruckman <fb@enteract.com>
|
|
|
|
* util/ntptime.c (main): ntx.freq bugfix (-f option)
|
|
From: Frederick Bruckman <fb@enteract.com>
|
|
|
|
1999-06-22 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: Fix typo with DECL_H_ERRNO test
|
|
|
|
* ntpd/ntp_loopfilter.c: Lose syscall decl, it's handled in
|
|
l_stdlib.h now.
|
|
* ntpd/ntp_request.c: Ditto
|
|
* util/ntptime.c: Ditto
|
|
|
|
Mon May 31 18:49:49 1999 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
* ntpd/ntp_proto.c (proto_config): Don't set sys_bclient on
|
|
PROTO_MULTICAST_ADD, only caller can decide; remove wrong set on
|
|
PROTO_MULTICAST_DEL.
|
|
|
|
Mon May 31 18:49:49 1999 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
* ntpd/refclock_parse.c (stream_receive): Cast size_t to int to
|
|
match format.
|
|
(local_receive): Likewise.
|
|
(trimbletaip_event): Likewise.
|
|
(stream_receive): Cast struct timeval members to long to match
|
|
format.
|
|
(local_receive): Likewise.
|
|
|
|
* ntpd/ntp_util.c (stats_config): Cast size_t to int to match
|
|
format.
|
|
|
|
* libparse/clk_rawdcf.c (cvt_rawdcf): Cast ptr difference to int
|
|
to match format.
|
|
* ntpd/refclock_parse.c (gps16x_poll): Likewise.
|
|
|
|
* ntpd/ntp_filegen.c (filegen_open): Use long format, cast arg to
|
|
match.
|
|
|
|
* ntpd/refclock_parse.c (list_err): Use long format to match arg.
|
|
(parse_statistics): Likewise.
|
|
(gps16x_message): Likewise.
|
|
(cvt_ts): Use long format, cast args to match.
|
|
(parse_start): Add missing arg.
|
|
(gps16x_message): Swap args to match format.
|
|
|
|
* ntpd/ntpd.c (ntpdmain): Cast uid to long, adapt format.
|
|
|
|
* ntpd/ntp_intres.c (readconf): Use long format to match arg.
|
|
* ntpd/ntp_io.c (getrecvbufs): Likewise.
|
|
* ntpd/ntp_proto.c (default_get_precision): Likewise.
|
|
|
|
* ntpd/ntp_loopfilter.c (local_clock): Cast clock_panic to int to
|
|
match format.
|
|
|
|
* ntpd/ntp_io.c (io_multicast_add): Print s_addr member, not
|
|
struct in_addr, to match format.
|
|
|
|
* include/ntp_stdlib.h: Declare msyslog() as printf-like for gcc
|
|
format checking.
|
|
|
|
Fri May 28 16:39:35 1999 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
* ntpdc/ntpdc_ops.c (iostats): Align timereset line.
|
|
|
|
* ntpq/ntpq_ops.c (doopeers): Properly align header.
|
|
|
|
* ntpdc/ntpdc_ops.c (debug): Removed declaration, already in
|
|
ntp_stdlib.h.
|
|
* ntpq/ntpq_ops.c: Likewise.
|
|
|
|
* ntpdate/ntpdate.c (debug): Declare volatile to match
|
|
ntp_stdlib.h.
|
|
* ntpdc/ntpdc.c, ntpq/ntpq.c, ntptrace/ntptrace.c, util/tickadj.c,
|
|
util/ntptime.c: Likewise.
|
|
|
|
* include/parse.h (debug): Don't declare to avoid clash with
|
|
ntp_stdlib.h.
|
|
|
|
* include/Makefile.am (noinst_HEADERS): Add new ntp_syscall.h.
|
|
|
|
* configure.in: Also check for -lrt for POSIX.1c functions.
|
|
|
|
Wed May 26 21:03:30 1999 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
* configure.in: Removed -Wwrite-strings from CFLAGS.
|
|
|
|
* ntpdc/ntpdc.c (help): Remove superfluous cast.
|
|
* ntpq/ntpq.c (help): Likewise.
|
|
|
|
Tue May 25 18:00:49 1999 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
* ntpq/ntpq_ops.c (struct varlist): name cannot be const char *
|
|
since it may be malloc'ed.
|
|
|
|
* ntpdc/ntpdc.c (sendrequest): Declare pass as const char *, don't
|
|
lose const in cast.
|
|
* ntpq/ntpq.c (sendrequest): Likewise.
|
|
|
|
* ntpd/ntp_control.c (ctl_getitem): Remove superfluous cast.
|
|
* include/ntpd.h (struct ctl_var): text cannot be const char *
|
|
since it's malloc'ed.
|
|
|
|
1999-06-22 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* include/l_stdlib.h: Don't include <netinet/in.h>, add forward
|
|
declaration of struct in_addr instead.
|
|
From: Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
Patch:
|
|
|
|
* include/l_stdlib.h: Fixed syscall() declaration.
|
|
* configure.in: Updated test to match.
|
|
|
|
* configure.in: Check if we need to declare errno and h_errno.
|
|
Check for <resolv.h> which may provide a h_errno declaration and
|
|
<arpa/nameserv.h> which the latter needs.
|
|
* acconfig.h: Provide the necessary templates.
|
|
|
|
* include/ntp_syscall.h: New file, hides various implementations
|
|
of ntp_adjtime() and ntp_gettime() syscalls.
|
|
* ntpd/ntp_loopfilter.c: Use it.
|
|
* ntpd/ntp_request.c: Likewise.
|
|
* ntpd/refclock_local.c: Likewise.
|
|
* util/ntptime.c: Likewise.
|
|
|
|
* include/l_stdlib.h: Include <netinet/in.h>, declare inet_ntoa if
|
|
necessary.
|
|
Moved syscall() declaration here.
|
|
|
|
* kernel/sys/parsestreams.h: Include <sys/termios.h> for it's
|
|
definition of struct ppsclockev.
|
|
Include <sys/ppsclock.h> unconditionally for definition of
|
|
CIOGETEV via TIOCGPPSEV.
|
|
* kernel/sys/ppsclock.h: Protect struct ppsclockev from
|
|
redefinition.
|
|
|
|
* include/ntp_refclock.h: Protect it from multiple inclusion.
|
|
* include/ntp_fp.h: Likewise.
|
|
* include/ntp.h: Likewise.
|
|
|
|
* include/ntpd.h: Include ntp_refclock.h for MAXDIAL declaration.
|
|
* libntp/authkeys.c: Include ntpd.h for current_time declaration.
|
|
|
|
* include/ntpd.h (getauthkeys, auth_agekeys, rereadkeys): Moved
|
|
prototypes to ntp_stdlib.h
|
|
|
|
* include/ntp_stdlib.h: Declare variables exported by libntp.
|
|
* include/ntpd.h: Likewise for ntpd.
|
|
|
|
* libntp/authkeys.c (key_hash, authnokey, authfreekeys,
|
|
cache_flags): Made static.
|
|
* libntp/systime.c (tvu_maxslew, tsf_maxslew, sys_clock_offset,
|
|
sys_residual): Likewise.
|
|
* ntpd/ntp_intres.c (confentries): Likewise.
|
|
* ntpd/ntp_loopfilter.c (clock_offset, clock_panic): Likewise.
|
|
(pll_nano): Likewise. Removed duplicate definition.
|
|
* ntpd/ntp_peer.c (peer_free, current_association_ID,
|
|
assocpeer_calls, init_peer_starttime): Likewise.
|
|
* ntpd/ntp_proto.c (sys_offset, sys_authdly): Likewise.
|
|
* ntpd/ntp_request.c (numrequests, numresppkts, errorcounter):
|
|
Likewise.
|
|
* ntpd/ntp_restrict.c (res_calls, res_found, res_not_found,
|
|
res_timereset, res_limited_refcnt): Likewise.
|
|
* ntpd/ntpd.c (was_alarmed, worker_thread): Likewise.
|
|
|
|
* ntpq/ntpq_ops.c: Moved declaration of external variable from
|
|
ntpq.c to file scope.
|
|
|
|
* adjtimed/adjtimed.c: Moved declarations of external variables to
|
|
ntpd.h and ntp_stdlib.h.
|
|
* clockstuff/propdelay.c: Likewise.
|
|
* libntp/a_md5encrypt.c, libntp/authencrypt.c, libntp/authkeys.c,
|
|
libntp/mfp_mul.c, libntp/msyslog.c, libntp/systime.c: Likewise.
|
|
* ntpd/ntp_config.c, ntpd/ntp_control.c, ntpd/ntp_filegen.c,
|
|
ntpd/ntp_intres.c, ntpd/ntp_io.c, ntpd/ntp_loopfilter.c,
|
|
ntpd/ntp_monitor.c, ntpd/ntp_peer.c, ntpd/ntp_proto.c,
|
|
ntpd/ntp_refclock.c, ntpd/ntp_request.c, ntpd/ntp_restrict.c,
|
|
ntpd/ntp_timer.c, ntpd/ntp_util.c, ntpd/ntpd.c,
|
|
ntpd/refclock_acts.c, ntpd/refclock_arbiter.c, ntpd/refclock_arc.c,
|
|
ntpd/refclock_as2201.c, ntpd/refclock_atom.c,
|
|
ntpd/refclock_bancomm.c, ntpd/refclock_chronolog.c,
|
|
ntpd/refclock_chu.c, ntpd/refclock_datum.c,
|
|
ntpd/refclock_dumbclock.c, ntpd/refclock_gpsvme.c,
|
|
ntpd/refclock_heath.c, ntpd/refclock_hpgps.c, ntpd/refclock_irig.c,
|
|
ntpd/refclock_jupiter.c, ntpd/refclock_leitch.c,
|
|
ntpd/refclock_local.c, ntpd/refclock_msfees.c,
|
|
ntpd/refclock_mx4200.c, ntpd/refclock_nmea.c,
|
|
ntpd/refclock_oncore.c, ntpd/refclock_palisade.h,
|
|
ntpd/refclock_parse.c, ntpd/refclock_pst.c, ntpd/refclock_shm.c,
|
|
ntpd/refclock_tpro.c, ntpd/refclock_trak.c, ntpd/refclock_true.c,
|
|
ntpd/refclock_usno.c, ntpd/refclock_wwvb.c: Likewise.
|
|
* ntpdate/ntpdate.c: Likewise.
|
|
* ntpdc/ntpdc.c, ntpdc/ntpdc_ops.c: Likewise.
|
|
* ntpq/ntpq.c: Likewise.
|
|
* ntptrace/ntptrace.c: Likewise.
|
|
* util/ntptime.c, til/tickadj.c: Likewise.
|
|
From: Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
* include/ntp_machine.h: Removed superfluous yy/mm/dd comments.
|
|
* include/ntpd.h: Likewise.
|
|
* libntp/authencrypt.c: Likewise.
|
|
* libntp/a_md5encrypt.c: Likewise.
|
|
* libntp/caljulian.c: Likewise.
|
|
* libntp/ymd2yd.c: Likewise.
|
|
* libntp/syssignal.c: Likewise.
|
|
* libntp/ymd2yd.c: Likewise.
|
|
* ntpd/ntp_control.c: Likewise.
|
|
* ntpd/ntp_io.c: Likewise.
|
|
* ntpd/ntp_timer.c: Likewise.
|
|
* ntpdate/ntpdate.c: Likewise.
|
|
* ntpq/ntpq_ops.c: Likewise.
|
|
* ntpd/ntp_peer.c (findpeer): Wrap debug output in DEBUG/debug.
|
|
From: Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
* dot.emacs: Removed wrong indentation of substatements.
|
|
Wrap in c-style.
|
|
From: Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
* ntpd/refclock_palisade.c: Patches from Marc Brett
|
|
* ntpd/refclock_palisade.h: Ditto.
|
|
* util/hist.c: Ditto.
|
|
|
|
Tue Jun 1 00:40:04 1999 Harlan Stenn <stenn@pogo.udel.edu>
|
|
|
|
* build: mips-dec-ultrix4.4 hates "set -e"
|
|
|
|
* flock-build: Created
|
|
|
|
* build: added -l option
|
|
|
|
Mon May 31 20:28:40 1999 Harlan Stenn <stenn@pogo.udel.edu>
|
|
|
|
* README: Removed auto{make,conf}.patch files
|
|
|
|
Tue May 25 01:20:53 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* Makefile.am ($(srcdir)/COPYRIGHT): Added
|
|
(EXTRA_DIST): Remove auto*.patches
|
|
|
|
Thu May 20 01:03:00 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* Makefile.am (dist-hook): Call dos2unix on the .htm files
|
|
|
|
* ntpd/refclock_palisade.h: Clean up declarations.
|
|
|
|
* configure.in (ac_cv_struct_ntptimeval_timespec): Added.
|
|
(ac_cv_make_ntptime): Only if ntptimeval does not use timespec.
|
|
|
|
* util/tickadj.c: Linux Patches
|
|
From: Reg Clemens <reg@dwf.com>
|
|
|
|
Wed May 19 01:18:24 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.93a
|
|
|
|
* ntpd/refclock_palisade.h: Restore some lost patches
|
|
From: Kamal A Mostafa <kamal@whence.com>
|
|
|
|
Sun May 16 13:18:32 1999 Philippe De Muyter <phdm@macqel.be>
|
|
|
|
* libparse/clk_wharton.c (cvt_wharton_400a, inp_wharton_400a): Expect
|
|
serial output format number 1, not 5.
|
|
(clock_wharton_400a) : Likewise.
|
|
* ntpd/refclock_parse.c (parse_clockinfo): For Wharton 400a clock,
|
|
do not poll, but expect a message every second.
|
|
* html/parsedata.htm : Entry added for Wharton 400a clock.
|
|
* html/driver8.htm : Entry fixed for Wharton 400a clock.
|
|
|
|
Sun May 16 02:59:46 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.93
|
|
|
|
Sat May 15 18:53:47 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (ntp_refclock): ONCORE requires PPSAPI, CIOGETEV,
|
|
or TIOCGPPSEV.
|
|
Reported by: Reg Clemens <reg@dwf.com>
|
|
|
|
Fri May 14 23:58:35 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.92h2
|
|
|
|
* configure.in (ac_cv_make_ntptime): Not under Linux. Yes, it
|
|
works for some people. We're tired of the complaints from the
|
|
others.
|
|
|
|
Fri May 14 18:58:59 1999 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
* libntp/authreadkeys.c (authreadkeys): Reject autokey keys.
|
|
Include ntp.h for NTP_MAXKEY definition, ntp_fp.h for types used
|
|
in ntp.h.
|
|
|
|
Wed May 12 23:02:22 1999 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
* libntp/authkeys.c (auth_delkeys): Don't remove autokey keys,
|
|
leave info on KEY_TRUSTED flag alone.
|
|
Include ntp.h for NTP_MAXKEY definition.
|
|
|
|
Thu May 13 02:19:02 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.92h1
|
|
|
|
* configure.in: patch for ReliantUNIX
|
|
From: Andrej Borsenkow <borsenkow.msk@sni.de>
|
|
|
|
* ntpd/refclock_oncore.c: Patches
|
|
From: Reg Clemens <reg@dwf.com>
|
|
|
|
Thu Apr 29 14:01:04 1999 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
* html/*.htm: Remove unnecessary . Cleanup <pre></pre>
|
|
sections.
|
|
|
|
* configure.in: Properly align configure --help output.
|
|
* html/config.htm: Include this version, removing Netscape
|
|
cruft.
|
|
|
|
Wed Apr 28 15:08:55 1999 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
* kernel/sys/parsestreams.h: Only include <sys/ppsclock.h> if
|
|
struct ppsclockev is missing from system headers.
|
|
|
|
* util/tickadj.c (getoffsets): Define kernels[] only if used.
|
|
(openfile): Rename fd to avoid shadowing global fd.
|
|
(writevar): Likewise.
|
|
(readvar): Likewise.
|
|
|
|
* parseutil/dcfd.c (read_drift): drift_file is const char *.
|
|
(update_drift): Likewise.
|
|
(adjust_clock): Likewise.
|
|
(main): Likewise.
|
|
|
|
* ntpd/refclock_parse.c (gps16x_poll): Adapt format to match
|
|
parse->localstate type.
|
|
|
|
* ntpd/ntp_refclock.c (refclock_gtlin): Only define gotit label
|
|
if used.
|
|
|
|
* include/l_stdlib.h (openlog, syslog): char * args are const.
|
|
|
|
* configure.in (*-*-osf4*): Enable declaration of stime().
|
|
|
|
* ntpd/refclock_oncore.c (oncore_msg_any): Cast args to long to
|
|
match prototype.
|
|
(oncore_msg_En): Likewise.
|
|
|
|
* include/ntp_refclock.h (struct refclockstat): Declare p_lastcode
|
|
as const char *.
|
|
|
|
* ntpq/ntpq_ops.c (struct varlist): Define name as const.
|
|
|
|
* ntpdc/ntpdc.c (tokenize): Define cp as const char *, remove
|
|
wrong cast instead.
|
|
|
|
* ntpd/ntp_util.c (record_clock_stats): Make text arg const.
|
|
* include/ntpd.h (record_clock_stats): Adapt declaration.
|
|
* ntpd/refclock_oncore.c (oncore_start): Removed superfluous casts.
|
|
(oncore_msg_Cf): Likewise.
|
|
(oncore_msg_Fa): Likewise.
|
|
(oncore_msg_Cj): Likewise.
|
|
(oncore_msg_Ea): Likewise.
|
|
(oncore_msg_Bj): Likewise.
|
|
|
|
* configure.in (*-*-solaris2.4): Enable declarations of
|
|
gettimeofday(), settimeofday(); they are `protected' by
|
|
__cplusplus in <sys/time.h>.
|
|
|
|
Tue Apr 27 21:14:47 1999 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
* scripts/summary.pl: Use . as default statsdir.
|
|
(do_loop): Accept new loopstats format with additional sys_error
|
|
and clock_stability fields.
|
|
(do_peer): Accept new peerstats format with additional skew field.
|
|
|
|
Mon Apr 26 01:50:38 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* Upgraded automake (1.4a) and autoconf (2.14.1)
|
|
|
|
* configure.in (ac_refclock_irig): We no longer need stropts.h.
|
|
* ntpd/refclock_irig.c: Ditto
|
|
|
|
Mon Apr 26 17:33:33 1999 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
* configure.in (*-*-irix6*): Don't pass MIPSpro cc-only flag -n32
|
|
to gcc.
|
|
|
|
Thu Apr 22 15:06:40 1999 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
|
|
|
|
* ntpd/ntp_config.c (getconfig): IN_CLASSD() expects address in
|
|
host byte order, but struct sockaddr_in.s_addr is in network byte
|
|
order.
|
|
* ntpd/ntp_io.c (io_multicast_del): Likewise.
|
|
|
|
Sat Apr 24 01:00:53 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.92h
|
|
|
|
* ntptrace/ntptrace.c: -m maxhost patch
|
|
From: "R. Gary Cutbill" <rgary@chrysalis.com>
|
|
|
|
* util/ntptime.c: Patches.
|
|
From: Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>
|
|
|
|
* html/accopt.htm, html/assoc.htm, html/authopt.htm,
|
|
html/biblio.htm, html/build.htm, html/clockopt.htm,
|
|
html/confopt.htm, html/copyright.htm, html/debug.htm,
|
|
html/exec.htm, html/extern.htm, html/hints.htm, html/index.htm,
|
|
html/kern.htm, html/miscopt.htm, html/monopt.htm, html/notes.htm,
|
|
html/ntpd.htm, html/ntpdate.htm, html/ntpdc.htm, html/ntpq.htm,
|
|
html/ntptime.htm, html/ntptrace.htm, html/patches.htm,
|
|
html/porting.htm, html/pps.htm, html/rdebug.htm,
|
|
html/refclock.htm, html/release.htm, html/tickadj.htm,
|
|
html/hints/solaris.html: Fixed many typos and problems.
|
|
* acconfig.h (DECL_CFSETISPEED_0, DECL_MRAND48_0, DECL_NLIST_0,
|
|
DECL_SRAND48_0, DECL_STIME_0): New templates.
|
|
* include/l_stdlib.h: Include termios.h to get definition of
|
|
speed_t.
|
|
(cfsetispeed, cfsetospeed, mrand48, nlist, srand48, stime): New
|
|
declarations.
|
|
(openlog): Declare 2- or 3-argument form.
|
|
* configure.in: Enable declarations of functions missing from
|
|
Ultrix V4.3 system headers.
|
|
* ntpd/refclock_oncore.c: Include <sys/types.h>, Ultrix V4.3
|
|
<sys/stat.h> needs it for dev_t.
|
|
From: Rainer Orth <ro@techfak.uni-bielefeld.de>
|
|
|
|
* ntpdc/ntpdc_ops.c: Reality checks.
|
|
|
|
* configure.in: netbsd has stubs for the timer_* stuff and doesn't
|
|
support PPSAPI. IRIG requires <stropts.h> .
|
|
From: Frederick Bruckman <fb@enteract.com>
|
|
|
|
* ntpdc/ntpdc_ops.c: (kerninfo) Report in seconds regardless of
|
|
kernel precision. Report kernel flags as text.
|
|
From: Poul-Henning Kamp <phk@critter.freebsd.dk>
|
|
|
|
Sun Apr 18 14:26:51 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.92g
|
|
|
|
* ntpd/ntp_refclock.c (refclock_ioctl): We don't want
|
|
PPS_HARDPPSONASSERT by default.
|
|
* ntpd/refclock_oncore.c: Prefer timepps.h over sys/timepps.h
|
|
From: Poul-Henning Kamp <phk@freebsd.org>
|
|
|
|
Tue Apr 13 17:32:35 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.92f
|
|
|
|
* ntpd/ntp_refclock.c (refclock_open): VMIN should be 1, not 0
|
|
From: Reg Clemens <reg@dwf.com>
|
|
|
|
Sun Apr 11 18:26:44 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_mx4200.c: Patches/improvements
|
|
* ntpd/ntpd.c (set_process_priority): Lint
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
* util/ntptime.c: Lint, bit definition cleanup
|
|
From: Ulrich Windl <ulrich.windl@rz.uni-regensburg.de>
|
|
|
|
Wed Apr 7 03:02:23 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_oncore.c: Use timepps.h or sys/timepps.h
|
|
* configure.in: Look for either timepps.h or sys/timepps.h
|
|
From: Poul-Henning Kamp <phk@critter.freebsd.dk>
|
|
|
|
* ntpd/ntp_io.c (create_sockets): Don't warn about ENXIO.
|
|
(Several places)
|
|
From: Andrej Borsenkow <borsenkow.msk@sni.de>
|
|
|
|
* libntp/mfp_mul.c (mfp_mul): Lint.
|
|
Marc.Brett@westgeo.com
|
|
|
|
Sun Apr 4 03:23:53 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.92e
|
|
Dave redesigned the clock state machine.
|
|
|
|
1999-02-28 Frank Kardel <kardel <AT> acm.org>
|
|
|
|
* parseutil/dcfd.c: added DCF77 module powersetup
|
|
|
|
* ntpd/refclock_parse.c (parse_control): using gmprettydate instead of prettydate()
|
|
(mk_utcinfo): new function for formatting GPS derived UTC information
|
|
(gps16x_message): changed to use mk_utcinfo()
|
|
(trimbletsip_message): changed to use mk_utcinfo()
|
|
ignoring position information in unsynchronized mode
|
|
(parse_start): augument linux support for optional ASYNC_LOW_LATENCY
|
|
|
|
* ntpd/ntp_control.c (ctl_putclock): cleanup of end of buffer handling
|
|
|
|
* libparse/parse.c (timepacket): removed unnecessary code
|
|
|
|
* libparse/clk_trimtsip.c (struct trimble): new member t_utcknown
|
|
(cvt_trimtsip): fixed status monitoring, bad receiver states are
|
|
now recognized
|
|
|
|
* libntp/prettydate.c (gmprettydate): new function for format date
|
|
and time with respect to UTC
|
|
|
|
* libntp/gpstolfp.c (GPSWRAP): update GPS rollover to 990 weeks
|
|
|
|
* include/trimble.h (CMD_RUTCPARAM): control variable name unification
|
|
|
|
* include/ntp_fp.h: added prototype for gmprettydate()
|
|
|
|
Sat Feb 27 00:03:16 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* libntp/systime.c: definition
|
|
* ntpd/ntp_proto.c: sco5_oldclock declaration
|
|
* configure.in: SCO5_CLOCK for *-*-sco3.2v5*
|
|
* util/tickadj.c (main): SCO5_OLDCLOCK -> SCO5_CLOCK
|
|
From: Kees Hendrikse <kees@echelon.nl>
|
|
|
|
* ntpd/ntp_config.c (getconfig): Indentation cleanup
|
|
Deal with 'P' case better
|
|
* ntpd/ntpd.c: Declare set_process_priority()
|
|
* ntpd/refclock_dumbclock.c: Lint cleanup
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
Wed Feb 24 10:22:51 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.92d
|
|
|
|
* configure.in: Dave says we can't enable PARSE clocks by default.
|
|
Also, Solaris 2.7 still has its kernel bug - disable kernel FLL
|
|
there.
|
|
Reported by: Dave Mills <dlm@udel.edu>
|
|
|
|
Tue Feb 23 23:37:44 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* libparse/Makefile.am (parsesolaris.o): Devious hack to deal
|
|
with bug in sys/systm.h .
|
|
Suggested by: Chaim Frenkel <chaimf@pobox.com>
|
|
|
|
Tue Feb 23 20:46:31 1999 Frank Kardel <kardel <AT> acm.org>
|
|
|
|
* ntpd/refclock_parse.c: fixed #endifs
|
|
(stream_receive): fixed formats
|
|
|
|
Mon Feb 22 00:35:06 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.92c
|
|
|
|
* ntpd/refclock_chronolog.c: Lint
|
|
* ntpd/refclock_dumbclock.c: Ditto
|
|
* ntpd/refclock_oncore.c: Ditto
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
* ntpd/refclock_oncore.c (oncore_msg_any): Call GETTIMEOFDAY, not
|
|
gettimeofday().
|
|
From: david.higgins@mail.ccur.com
|
|
|
|
* configure.in (MCAST): Not in i386-sequent-sysv4
|
|
Reported by: Joseph Geter <joe.geter@somills.com>
|
|
|
|
* util/ntptime.c: Linux cleanup.
|
|
From: Reg Clemens <reg@dwf.com>
|
|
|
|
* configure.in: Rename SCO5_OLDCLOCK to SCO5_CLOCK
|
|
* acconfig.h: Ditto
|
|
|
|
* ntpd/ntp_proto.c: SCO5_CLOCK stuff
|
|
(init_proto): Use the SCO5_CLOCK stuff
|
|
* libntp/systime.c: SCO5_CLOCK stuff
|
|
(get_systime): Use the SCO5_CLOCK stuff
|
|
(adj_systime): Use the SCO5_CLOCK stuff
|
|
From: Kees Hendrikse <kees@echelon.nl>
|
|
|
|
* ntpd/ntp_config.c: Added -P option and associated baggage.
|
|
(getstartup): Update help text
|
|
(getconfig): Process -P option
|
|
(getconfig): Update help text
|
|
* ntpd/ntpd.c (set_process_priority): Created.
|
|
(service_main): remove process priority stuff - we want to do at
|
|
after we start up the resolver, so call set_process_priority()
|
|
after getconfig().
|
|
From: Kamal A Mostafa <kamal@whence.com>
|
|
|
|
1999-02-21 Frank Kardel <kardel <AT> acm.org>
|
|
|
|
* ntpd/ntp_util.c (hourly_stats): removed unused variable
|
|
|
|
* libntp/ieee754io.c: renamed index to fieldindex to avoid index() name clash
|
|
|
|
* ntpd/refclock_parse.c (parse_start): add initialization for Linux PPSkit
|
|
|
|
Sun Feb 21 17:53:33 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_io.c (create_sockets): Skip interfaces that are really
|
|
just aliases.
|
|
From: "Erik R. Leo" <erikl@sover.net>
|
|
|
|
* configure.in: 4.0.92b
|
|
|
|
* ntpd/ntpd.c (service_main): Check for an error return from
|
|
sched_get_priority_max().
|
|
|
|
Wed Feb 17 03:48:47 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.92a
|
|
|
|
* configure.in: configure.in requires autoconf 2.13 or later.
|
|
Reported by Ulrich Windl <ulrich.windl@rz.uni-regensburg.de>
|
|
|
|
Wed Feb 17 00:12:11 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* acconfig.h: TERMIOS_NEEDS__SVID3
|
|
* configure.in: Ditto
|
|
* ntpd/refclock_palisade.h: Ditto
|
|
* include/ntp_refclock.h: Ditto
|
|
* ntpd/ntpd.c (service_main): We want sched_get_priority_max().
|
|
From: Kamal A Mostafa <kamal@whence.com>
|
|
|
|
* ntpd/ntp_refclock.c (refclock_open): Zero the entire c_cc[] array.
|
|
From: Reg Clemens <reg@dwf.com>
|
|
|
|
Tue Feb 16 23:37:49 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* Updated ansi2knr
|
|
Reported by: Marc Brett
|
|
|
|
Mon Feb 15 02:55:28 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.92
|
|
|
|
* ntpd/ntp_refclock.c: Added refclock_chronolog and
|
|
refclock_dumbclock.
|
|
From: Robert McMillin <rlm@syseca-us.com>
|
|
|
|
Sun Feb 14 15:57:53 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* dropped SCO3 support #defines.
|
|
* changed SCO5_TICKADJ #define to SCO5_OLDCLOCK
|
|
* Added code in libntp/systime.c to accumulate changes until a whole
|
|
tick can be added or dropped. Adjusted gettimeofday() output
|
|
to include the contents of the accumulator.
|
|
* cleaned up util/tickadj.c; tickadj -As now does the right thing.
|
|
From: Kees Hendrikse <kees@echelon.nl>
|
|
|
|
* ntpq/ntpq.c: Rename delay() to auth_delay()
|
|
Reported by: Andrej Borsenkow <borsenkow.msk@sni.de>
|
|
|
|
* ntpd/refclock_palisade.h: Cleanup.
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
* ntpd/ntp_refclock.c (refclock_ioctl): Typo.
|
|
From: Reg Clemens <reg@dwf.com>
|
|
|
|
* ntpd/ntp_io.c (create_sockets): Only bind a given network once.
|
|
From: Wolfgang Rupprecht <wolfgang@wsrcc.com>
|
|
|
|
Sat Jan 30 11:48:37 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.91f
|
|
|
|
Thu Jan 28 22:58:40 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_parse.c (CLK_REALTYPE): We really want ttl, not hmode.
|
|
* ntpd/ntp_config.c (getconfig): "mode" really should update the
|
|
ttl member, not the hmode member.
|
|
|
|
* ntpd/refclock_local.c: More offset cleanup from Dave.
|
|
|
|
Thu Jan 28 00:15:20 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.91e
|
|
|
|
* ntpd/refclock_local.c: Bugfix.
|
|
From: Dave Mills
|
|
|
|
* ntpd/refclock_palisade.c: Lint/IRIX portability cleanup
|
|
* ntpd/refclock_palisade.h: Re-enable the declaration of float()
|
|
* ntpd/ntp_io.c (create_sockets): Initialize size to 0
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
* ntpd/refclock_parse.c (CLK_REALTYPE): Use hmode, not ttl.
|
|
* configure.in (ac_cv_var_no_parenb_ignpar): Not under Linux.
|
|
Reported by: Thomas Quinot <thomas@Cuivre.FR.EU.ORG>
|
|
|
|
* ntpdc/ntpdc.c (my_delay): Renamed, from delay.
|
|
Reported by: Andrej Borsenkow <borsenkow.msk@sni.de>
|
|
|
|
Tue Jan 26 00:56:10 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.91d
|
|
|
|
* ntpq/ntpq.c: Y2K patches
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
* html/driver29.htm: New version
|
|
* ntpd/refclock_palisade.c: Ditto
|
|
* ntpd/refclock_palisade.h: Ditto
|
|
From: Sven_Dietrich@Trimble.COM
|
|
|
|
* upgrade ansi2knr.c
|
|
|
|
* Some stuff that Dave did.
|
|
|
|
* configure.in: 4.0.91c
|
|
|
|
* ntpd/refclock_oncore.c: Prototype cleanup. Enum cleanup.
|
|
* ntpd/ntp_proto.c (clock_select): Fix memory leak.
|
|
* configure.in (ac_cv_struct_ppsclockev): Might need sys/time.h to
|
|
check for struct clockppsev. Return pce->serial, not 0;
|
|
From: Marc.Brett@westgeo.com
|
|
|
|
* ntpd/refclock_oncore.c (oncore_msg_En): Clean up.
|
|
From: John.Hay@mikom.csir.co.za
|
|
|
|
Mon Jan 25 11:50:29 1999 Philippe De Muyter <phdm@macqel.be>
|
|
|
|
* libparse/parse_conf.c (clockformats): Entry added for
|
|
clock_wharton_400a.
|
|
* libparse/clk_wharton.c: New file.
|
|
* libparse/Makefile.am (libparse_a_SOURCES): clk_wharton.c added;
|
|
(libparse_kernel_a_SOURCES): kclk_wharton.c added.
|
|
(kclk_wharton.o): New dependency rule.
|
|
* ntpd/refclock_parse.c (parse_clockinfo): Entry added for the
|
|
WHARTON clock (mode 15).
|
|
* acconfig.h (CLOCK_WHARTON_400A): New configuration macro.
|
|
* configure.in (CLOCK_WHARTON_400A): Macro defined like other
|
|
CLOCK_xxx macros.
|
|
|
|
Sun Jan 24 13:51:30 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_config.c (do_resolve_internal): Missing #ifdef DEBUG
|
|
From: Sven Dietrich <Sven_Dietrich@Trimble.COM>
|
|
|
|
* Makefile.am (SUBDIRS): Lose authstuff
|
|
* configure.in: Ditto
|
|
|
|
Sat Jan 23 15:28:03 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.91b
|
|
|
|
Sat Jan 23 15:02:25 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_oncore.c: use HAVE_STRUCT_PPSCLOCKEV
|
|
* acconfig.h: HAVE_STRUCT_PPSCLOCKEV
|
|
* configure.in (ac_cv_struct_ppsclockev): Added test
|
|
|
|
Thu Jan 21 15:35:25 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.91a
|
|
|
|
* ntpd/refclock_nmea.c (nmea_receive): Call refclock_process()
|
|
every second (or each time a nmea string is received).
|
|
From: John Hay <jhay@mikom.csir.co.za>
|
|
|
|
* ntpd/ntp_refclock.c (refclock_ioctl): Use TIOCPPS if we have it.
|
|
(refclock_ioctl): Use LDISC_CLKPPS, not LDISC_PPS when deciding
|
|
how to set str.
|
|
* ntpd/ntp_loopfilter.c: Lose unused ntp_gettime() stuff.
|
|
* ntpd/ntp_request.c: Ditto.
|
|
* ntpd/refclock_local.c: Ditto.
|
|
* ntpd/refclock_shm.c (shm_poll): Fix the refclock_process() call.
|
|
* ntpd/refclock_oncore.c: patches and cleanup
|
|
* configure.in: ioctl/PPS checks, ONCORE cleanup
|
|
* acconfig.h: ONCORE cleanup
|
|
From: Reg Clemens <reg@dwf.com>
|
|
|
|
* configure.in (CFLAGS): cc on Sequent wants -Wc,+abi-socket.
|
|
We also need to figure out why -lsocket isn't being detected;
|
|
-lsocket is needed.
|
|
From: Dana Kaempen <decay@flash.net>
|
|
|
|
* include/ntp_stdlib.h: AIX portability patches, header cleanup.
|
|
* ntptrace/ntptrace.c: Ditto.
|
|
* ntpdate/ntpdate.c: Ditto.
|
|
* ntpd/refclock_true.c: Ditto.
|
|
* ntpd/refclock_mx4200.c: Ditto.
|
|
* ntpd/refclock_jupiter.c: Ditto.
|
|
* libntp/msyslog.c: Ditto.
|
|
From: Marc.Brett@waii.com
|
|
|
|
Sun Jan 10 15:15:07 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.91
|
|
|
|
Sat Jan 9 00:11:34 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* include/ntp_stdlib.h: msyslog() is declared differently if we're
|
|
not __STDC__.
|
|
|
|
* include/ntp_types.h: It's HAVE_PROTOTYPES, not USE_PROTOTYPES.
|
|
* include/ntp_machine.h: Ditto.
|
|
|
|
Fri Jan 8 20:47:10 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: Upgrade to autoconf-2.13
|
|
Do the prototypes check much earlier, as it might alter CFLAGS and
|
|
things which will affect other tests.
|
|
|
|
* ntpd/ntp_request.c (do_conf): The problem was with a template
|
|
for "version" on an IRIX C compiler...
|
|
From: Marc.Brett@waii.com
|
|
|
|
* libntp/authkeys.c: #include config.h first.
|
|
Reported by: brian.bumpass@funb.com
|
|
|
|
Thu Jan 7 00:24:35 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* util/tickadj.c (main): return() instead of exit().
|
|
* ntpd/ntp_request.c (do_conf): Disambiguate ||.
|
|
* ntpd/ntp_proto.c (clock_select): Initialize variables.
|
|
From: Marc.Brett@waii.com
|
|
|
|
* scripts/ntpver.in: Use PATH_SH
|
|
|
|
* configure.in (PATH_SH): Added.
|
|
|
|
Tue Jan 5 19:02:51 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.90h
|
|
|
|
* html/driver30.htm: Updated.
|
|
* html/refclock.htm: Refer to driver30
|
|
* ntpd/refclock_oncore.c: Vastly improve and make less FreeBSD centric,
|
|
From: Poul-Henning Kamp <phk@critter.freebsd.dk> and
|
|
Reg.Clemens <reg@dwf.com>
|
|
|
|
* include/ntp.h: Portability/lint patches
|
|
* libntp/binio.c: Ditto.
|
|
* libntp/caljulian.c: Ditto.
|
|
* libntp/caltontp.c: Ditto.
|
|
* libntp/ieee754io.c: Ditto.
|
|
* libntp/md5c.c: Ditto.
|
|
* libntp/mfp_mul.c: Ditto.
|
|
* libntp/msyslog.c: Ditto.
|
|
* libntp/statestr.c: Ditto.
|
|
* libntp/systime.c: Ditto.
|
|
* libparse/clk_trimtsip.c: Ditto.
|
|
* libparse/data_mbg.c: Ditto.
|
|
* libparse/parse.c: Ditto.
|
|
* ntpd/ntp_control.c: Ditto.
|
|
* ntpd/ntp_filegen.c: Ditto.
|
|
* ntpd/ntp_intres.c: Ditto.
|
|
* ntpd/ntp_io.c: Ditto.
|
|
* ntpd/ntp_peer.c: Ditto.
|
|
* ntpd/ntp_proto.c: Ditto.
|
|
* ntpd/ntp_util.c: Ditto.
|
|
* ntpd/ntpd.c: Ditto.
|
|
* ntpd/refclock_arc.c: Ditto.
|
|
* ntpd/refclock_chu.c: Ditto.
|
|
* ntpd/refclock_datum.c: Ditto.
|
|
* ntpd/refclock_leitch.c: Ditto.
|
|
* ntpd/refclock_parse.c: Ditto.
|
|
* ntpd/refclock_usno.c: Ditto.
|
|
* ntpq/ntpq.c: Ditto.
|
|
* util/tickadj.c: Ditto.
|
|
From: Marc.Brett@waii.com
|
|
|
|
Mon Jan 4 00:56:55 1999 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.90g
|
|
|
|
* ntpd/ntp_config.c (getconfig): MODE was setting ttl, not hmode.
|
|
Reported by: Carsten Emde <ce@ceag.ch>
|
|
|
|
Fri Dec 4 01:01:14 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.90f
|
|
|
|
* ntpd/refclock_mx4200.c: New version
|
|
From: Marc.Brett@waii.com
|
|
|
|
1998-12-02 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_config.c (do_resolve_internal): If fork fails, say why.
|
|
Reported by: Jeff_Dennison@admin.tc.faa.gov
|
|
|
|
* ntpd/ntpd.c (ntpdmain): fork() can return a -1. Someday we'll
|
|
report this condition...
|
|
|
|
1998-12-02 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.90e
|
|
|
|
* ntpd/refclock_palisade.c: Reformat code so ansi2knr will work
|
|
* ntpd/refclock_palisade.h: Ditto
|
|
From: Marc.Brett@waii.com
|
|
|
|
Sun Nov 29 21:00:53 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.90d
|
|
|
|
* configure.in (CFLAGS): Use "-O2 -g3 -n32" by default for Irix6.2
|
|
and later.
|
|
Reported by: Jack Bryans <jbryans@csulb.edu>
|
|
|
|
1998-11-29 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.90c
|
|
|
|
* ntpd/refclock_oncore.c (oncore_msg_En): Convert to nano
|
|
From: John Hay <jhay@mikom.csir.co.za>
|
|
|
|
* include/ntp_request.h (RM_VN_MODE): Add version parameter, so
|
|
xntpdc will work across v3 and v4.
|
|
* ntpd/ntp_request.c: Track requested version
|
|
(req_ack): Use requested version in RM_VN_MODE
|
|
(more_pkt): Ditto
|
|
(flush_pkt): Ditto
|
|
(process_private): Get requested version
|
|
* ntpd/ntp_intres.c (request): Use default version
|
|
* ntpdc/ntpdc.c (sendrequest): Ditto
|
|
From: John Hay <jhay@mikom.csir.co.za>
|
|
|
|
Fri Nov 27 14:27:21 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_palisade.c: Lint cleanup
|
|
* ntpd/refclock_palisade.h: Ditto.
|
|
From: Marc Brett <mbrett@rgs0.london.waii.com>
|
|
|
|
Mon Nov 23 04:45:03 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.90b
|
|
|
|
* New code and cleanup for the NT stuff
|
|
From: Carl Byington <carl@five-ten-sg.com>
|
|
|
|
Sat Nov 21 21:21:45 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.90a
|
|
|
|
* libntp/systime.c (step_systime): net_set_tod calls clock_settime.
|
|
* libntp/machines.c (ntp_set_tod): Take a 2nd arg for NT.
|
|
* include/ntp_machine.h: ntp_set_tod() has 2 args always.
|
|
* ports/winnt/bldrel.bat: Typo.
|
|
From: Carl Byington <carl@five-ten-sg.com>
|
|
|
|
* ntpd/ntp_intres.c (findhostaddr): h_errno is a #define under AIX.
|
|
* configure.in: clock_settime is a stub in AIX4.
|
|
From: Perry Ross <pross@platinum.com>
|
|
|
|
* libntp/Makefile.am (EXTRA_DIST): Lose libntp.mak
|
|
* ntpd/Makefile.am (EXTRA_DIST): Ditto.
|
|
* ntpdate/Makefile.am (EXTRA_DIST): Ditto.
|
|
* ntpdc/Makefile.am (EXTRA_DIST): Ditto.
|
|
* ntpq/Makefile.am (EXTRA_DIST): Ditto.
|
|
From: Greg Schueman <schueman@ix.netcom.com>
|
|
|
|
Sat Nov 21 12:33:16 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.90
|
|
|
|
Nano changes from Dave Mills.
|
|
|
|
Thu Nov 19 04:23:46 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* include/ntp_machine.h: STREAM also needs HAVE_SYS_STREAM_H
|
|
Reported by: Ronald Cole <ronald@forte-intl.com>
|
|
|
|
Mon Nov 16 19:17:34 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.73e14
|
|
|
|
* util/ntptime.c (main): Protect STA_NANO
|
|
|
|
* ntpd/refclock_oncore.c: General overhaul and simplifications.
|
|
The new manual clarifies a lot of fine points, and the driver has
|
|
been suitably simplified. Uses Site Survey if possible, otherwise
|
|
does it by hand. Should also work with non-UT models, as long as
|
|
they talk the Motorola Binary Protocol. The driver Doesn't (need
|
|
to) know where the author lives anymore.
|
|
From: Poul-Henning Kamp <phk@critter.freebsd.dk>
|
|
|
|
* ntpd/refclock_palisade.h: New version.
|
|
* ntpd/refclock_palisade.c: New version.
|
|
From: Sven Dietrich <Sven_Dietrich@Trimble.COM>
|
|
|
|
Sat Oct 24 01:19:21 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.73e13
|
|
|
|
* ntpdc/ntpdc_ops.c (clkbug): Patches
|
|
* ntpd/ntp_refclock.c (refclock_buginfo): Patches
|
|
From: Marc.Brett@waii.com
|
|
|
|
Sat Oct 10 20:13:14 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.73e12
|
|
|
|
* ntpd/ntp_util.c (hourly_stats): Added prio_set stuff.
|
|
|
|
* ntpd/ntpd.c (ntpdmain): HAVE_SETPGRP_0 typo.
|
|
* parseutil/dcfd.c (detach): Ditto.
|
|
* ntpd/ntp_control.c (ctl_putpeer): Sometimes, peer->dstadr is
|
|
NIL.
|
|
From: Perry Ross <pross@platinum.com>
|
|
|
|
* ntpd/ntpd.c:
|
|
Some systems use sys/sched.h, not sched.h (Irix)
|
|
* configure.in (CFLAGS): nextstep needs -posix.
|
|
Reported by: Jack Bryans <jbryans@csulb.edu>
|
|
|
|
Sat Oct 3 02:32:46 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.73e11
|
|
|
|
* configure.in (ac_refclock_palisade): Needs termios.
|
|
|
|
* libntp/mktime.c: Some systems need sys/types.h
|
|
|
|
* configure.in: Added AC_TYPE_SIZE_T and AC_CHECK_TYPE(time_t, long)
|
|
The time_t stuff should only be needed on Older machines, so the
|
|
fact that I'm using a long shouldn't be a problem (hollow laugh).
|
|
|
|
* include/l_stdlib.h: Sometimes we need to #include <sys/types.h>
|
|
|
|
* libntp/Makefile.am (../include/des.h): Typo.
|
|
|
|
Fri Oct 2 20:52:47 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_intres.c (request): Accept responses back thru V2.
|
|
|
|
Thu Oct 1 00:11:16 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.73e9
|
|
|
|
* ntpd/ntpd.c (catch_danger): Added.
|
|
(ntpdmain): AIX SIGDANGER stuff
|
|
From: Lars-Owe Ivarsson <larsowe@paradisaea.its.uu.se>
|
|
|
|
* configure.in:
|
|
* include/ntp_machine.h:
|
|
* include/ntp_string.h:
|
|
* libntp/machines.c:
|
|
* libparse/clk_hopf6021.c:
|
|
* libparse/clk_trimtsip.c:
|
|
* ntpd/refclock_leitch.c:
|
|
* ntpd/refclock_palisade.c:
|
|
* ntpd/refclock_parse.c:
|
|
Here are some patches to suppress warnings from various compilers
|
|
(IRIX 5.3, MipsPro C 7.1 on IRIX 6.4, AIX 4.1) and loaders (IRIX
|
|
5.3, IRIX 6.4). Shouldn't affect functionality at all.
|
|
From: Marc Brett <mbrett@rgs0.london.waii.com>
|
|
(I got similar patches for AIX from Lars-Owe Ivarsson
|
|
<larsowe@paradisaea.its.uu.se>)
|
|
|
|
Thu Sep 24 21:33:50 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: '73e8
|
|
|
|
* configure.in: AIX4 stubs the POSIX timer_ stuff,
|
|
sched_setscheduler, and mlockall.
|
|
Reported by: Lars-Owe Ivarsson <larsowe@paradisaea.its.uu.se>
|
|
|
|
* configure.in: OpenBSD stubs the POSIX timer_ stuff.
|
|
Reported by: sidney august cammeresi iv <cammeres@uiuc.edu>
|
|
(and several other folks whose names I can't find at the moment)
|
|
|
|
Mon Sep 21 15:35:23 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: '73e7
|
|
|
|
* ntpd/refclock_parse.c: Missing declaration
|
|
From: Marc Brett <mbrett@rgs0.london.waii.com>
|
|
|
|
* include/README: Remove old MCAST descriptions
|
|
|
|
* include/Makefile.am (noinst_HEADERS): Lose sun-in.h .
|
|
|
|
Mon Sep 21 14:50:12 1998 Harlan Stenn <stenn@grundoon.udel.edu>
|
|
|
|
* ntpdate/ntpdate.c (timer): Properly format the definition.
|
|
|
|
Sun Sep 20 23:02:50 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: '73e6
|
|
|
|
* include/Makefile.am (noinst_HEADERS): Renamed in.h to sun-in.h
|
|
|
|
Fri Sep 18 01:05:55 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: '73e5
|
|
|
|
* ntpd/refclock_palisade.c: SCO patch
|
|
From: Kamal A Mostafa <kamalm@sco.com>
|
|
|
|
* libparse/clk_trimtsip.c (cvt_trimtsip): Fix rollover bug.
|
|
From: "Michael J. Tubby B.Sc. G8TIC" <Mike.Tubby@thorcom.co.uk>
|
|
|
|
* libntp/authencrypt.c:
|
|
* libntp/systime.c:
|
|
* ntpd/refclock_acts.c:
|
|
* ntpd/refclock_arbiter.c:
|
|
* ntpd/refclock_arc.c:
|
|
* ntpd/refclock_as2201.c:
|
|
* ntpd/refclock_atom.c:
|
|
* ntpd/refclock_chu.c:
|
|
* ntpd/refclock_conf.c:
|
|
* ntpd/refclock_datum.c:
|
|
* ntpd/refclock_heath.c:
|
|
* ntpd/refclock_hpgps.c:
|
|
* ntpd/refclock_irig.c:
|
|
* ntpd/refclock_leitch.c:
|
|
* ntpd/refclock_nmea.c:
|
|
* ntpd/refclock_palisade.c:
|
|
* ntpd/refclock_parse.c:
|
|
* ntpd/refclock_pst.c:
|
|
* ntpd/refclock_trak.c:
|
|
* ntpd/refclock_true.c:
|
|
* ntpd/refclock_usno.c:
|
|
* ntpd/refclock_wwvb.c:
|
|
Typos, cleanup, and bugfixes
|
|
From: Marc Brett <mbrett@rgs0.london.waii.com>
|
|
|
|
* ntpd/ntp_timer.c (timer): Typo.
|
|
* include/ntp_refclock.h: in refclockstat, clockdesc should be const.
|
|
* ntpd/ntp_io.c (create_sockets): Typo.
|
|
* ntpd/ntp_control.c (free_varlist): Use the appropriate cast when
|
|
calling free().
|
|
(set_var): Use char *td for non-const char data.
|
|
(ctl_getitem): Use char * for non-const data.
|
|
(Many of these reported by Marc Brett)
|
|
|
|
Sun Sep 13 19:19:09 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntpd.c: Added nofork declaration.
|
|
(ntpdmain): Initialize it...
|
|
* ntpd/ntp_config.c: added nofork.
|
|
Updated ntp_options.
|
|
(getstartup): Updated "usage" string. Deal with -n flag.
|
|
(getconfig): Ditto.
|
|
From: Jeffrey Hutzelman <jhutz@cs.cmu.edu>
|
|
|
|
* ntpd/ntp_io.c (open_socket): Use ntoa() to print out the address
|
|
when bind() fails. (in 2 places)
|
|
Reported by: "Markus W. Fehr" <mfehr@ch.ibm.com>
|
|
Only soft-fail if an interface is unavailable.
|
|
(create_sockets): Don't SO_REUSEADDR if the interface is unavailable.
|
|
From: "Markus W. Fehr" <mfehr@ch.ibm.com>
|
|
|
|
* configure.in: If we --disable-all-clocks, then don't enable
|
|
parse clocks by default.
|
|
Reported by: Marion Hakanson <hakanson@cse.ogi.edu>
|
|
|
|
Sat Aug 22 23:58:14 1998 Frank Kardel <kardel <AT> acm.org>
|
|
|
|
* ntpd/refclock_parse.c (local_input): fixed IO handling for non-STREAM IO
|
|
|
|
Sun Aug 16 20:13:32 1998 Frank Kardel <kardel <AT> acm.org>
|
|
|
|
* libntp/ieee754io.c: debug information only compile for LIBDEBUG case
|
|
|
|
* ntpd/refclock_parse.c (gps16x_message): reduced UTC parameter information (dropped A0,A1)
|
|
made uval a local variable (killed one of the last globals)
|
|
(sendetx): added logging of messages when in debug mode
|
|
(trimble_check): added periodic checks to facilitate re-initialization
|
|
(trimbletsip_init): made use of EOL character if in non-kernel operation
|
|
(trimbletsip_message): extended message interpretation
|
|
(getdbl): fixed data conversion
|
|
|
|
* libparse/parse_conf.c (clockformats): Trimble TSIP driver now also
|
|
available for kernel operation
|
|
|
|
* libparse/info_trimble.c: re-generated
|
|
|
|
* libparse/clk_trimtsip.c (cvt_trimtsip): initial kernel capable version (no more floats)
|
|
(clock_trimtsip =): new format name
|
|
|
|
* libparse/clk_trimtaip.c (clock_trimtaip =): changed format name
|
|
|
|
* include/trimble.h (CMD_RSTATTRACK): renamed mode 6 variable name
|
|
|
|
* scripts/monitoring/ntploopwatch: moved emacs mode selector
|
|
|
|
Mon Aug 10 15:32:48 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_acts.c: Patch cleanup
|
|
* ntpd/ntp_refclock.c: Patch cleanup
|
|
* ntpd/ntp_timer.c: Patch cleanup
|
|
From: qli@huey.udel.edu
|
|
|
|
Wed Jul 29 15:23:21 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* libntp/machines.c: IRIX needs time.h
|
|
Reported by: Judith E Bush <jbush@fi.edu>
|
|
|
|
* ntpd/ntpd.c (service_main): Better AIX PROCLOCK fix.
|
|
From: Matt Ladendorf <matt.ladendorf@anheuser-busch.com> and
|
|
Grover Davidson <Grover.Davidson@anheuser-busch.com>
|
|
|
|
Wed Jul 29 01:36:48 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* include/ntpd.h (MAXINTERFACES): Moved here...
|
|
* ntpd/ntp_io.c: From here...
|
|
(create_sockets): Only deal with MAXINTERFACES.
|
|
(create_sockets): Only deal with specified interfaces.
|
|
|
|
* ntpd/ntp_config.c (CONFIG_LISTEN): Added
|
|
Added ifnum and listenaddrs[]
|
|
(getconfig): Added defn for "addr"
|
|
(getconfig): Initialize ifnum.
|
|
|
|
* ntpd/ntpd.c (service_main): call init_io after getconfig
|
|
From: Vebjorn Ljosa <ljosa@initio.no>
|
|
|
|
Wed Jul 29 00:42:28 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_palisade.c: Use NEED_HPUX9_TIOCM_STUFF
|
|
|
|
* acconfig.h (NEED_HPUX9_TIOCM_STUFF): Added.
|
|
|
|
* configure.in (REFCLOCK_PALISADE): Needs termio*.h
|
|
(NEED_HPUX9_TIOCM_STUFF): Added.
|
|
|
|
* ntpd/ntp_io.c (create_sockets): Use strchr instead of strstr.
|
|
|
|
* libntp/mktime.c: #include <sys/types.h>
|
|
|
|
* libntp/ieee754io.c: #include <sys/types.h>
|
|
|
|
Wed Jul 29 00:24:22 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_acts.c (ACTS_MAXPOLL): 14 -> 18.
|
|
Import current_nextdate
|
|
(acts_receive): Update peer->nextdate with current_nextdate
|
|
(acts_poll): Call acts_timeout() (debugging)
|
|
|
|
* ntpd/ntp_refclock.c: Export current_nextdate.
|
|
(refclock_transmit): Check peer->valid >= NTP_SHIFT - 2, not >.
|
|
(refclock_transmit): hpoll wiggles, update current_nextdate
|
|
|
|
* ntpd/ntp_timer.c: #include "ntp_refclock.h"
|
|
(MODE_MANUAL): Added.
|
|
(timer): MODE_MANUAL stuff
|
|
|
|
From: qli@huey.udel.edu
|
|
|
|
Tue Jul 28 23:23:15 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: Check for inet_ntoa in -lbind .
|
|
|
|
* ntpd/ntpd.c: #undef PROCLOCK for AIX.
|
|
|
|
Mon Jul 20 01:06:24 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (AC_TYPE_SIZE_T): Added.
|
|
|
|
Sat Jul 11 09:38:30 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.73e
|
|
|
|
* ports/winnt/: Replaced with new code (no SHM or PALISADE)
|
|
From: Greg Schueman <schueman@ix.netcom.com>
|
|
|
|
Fri Jul 10 12:12:59 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.73d
|
|
|
|
* include/ntp_machine.h (HAVE_SRANDOM): VxWorks patches
|
|
(HAVE_RANDOM): Ditto.
|
|
(CALL): Ditto.
|
|
From: Casey Crellin <ccrellin@mweb.com>
|
|
|
|
* ntpd/refclock_parse.c (local_input): Typo.
|
|
Reported by: Tony Li <tony1@home.net>
|
|
|
|
Wed Jul 8 01:49:01 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.73c
|
|
|
|
* PARSE patches from Frank Kardel
|
|
|
|
* libntp/machines.c (ntp_set_tod): Get it right.
|
|
|
|
Sun Jul 5 22:15:34 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.73a
|
|
|
|
* kernel/sys/timex.h (MOD_CANSCALE): Add rest of patch to handle
|
|
scaling.
|
|
From: Poul-Henning Kamp <phk@critter.freebsd.dk>
|
|
|
|
Wed Jun 10 21:16:01 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.73
|
|
|
|
* ntpd/ntp_loopfilter.c (local_clock): MOD_CANSCALE patches, and
|
|
be careful with the integration if we're nearly perfect.
|
|
From: Poul-Henning Kamp <phk@critter.freebsd.dk>
|
|
|
|
* util/tickadj.c (main): Typo fix...
|
|
From: Marion Hakanson <hakanson@cse.ogi.edu>
|
|
|
|
* ntpd/ntp_io.c (create_sockets): Attempt to ignore alias
|
|
interfaces.
|
|
From: Kenneth Maupin <maupin@easystreet.com>
|
|
|
|
* ntpd/ntp_refclock.c: PPS fixes
|
|
* ntpd/refclock_msfees.c (msfees_start): Portability fixes and
|
|
PPS/STREAM enhancements
|
|
From: John Hay <jhay@mikom.csir.co.za>
|
|
|
|
* ntpd/ntp_refclock.c (refclock_gtlin): Patch...
|
|
From: Jonathan Stone <jonathan@DSG.Stanford.EDU>
|
|
|
|
Sun Jun 28 18:43:30 1998 Frank Kardel <kardel <AT> acm.org>
|
|
|
|
* libntp/buftvtots.c (buftvtots): using WORD_BIGENDIAN instead of XNTP_BIG_ENDIAN
|
|
|
|
* libparse/clk_trimtsip.c (getflt): fixed ENDIAN issue
|
|
(getdbl): fixed ENDIAN issue
|
|
(getint): use get_msb_short()
|
|
(cvt_trimtsip): use gpstolfp() for conversion
|
|
|
|
* libntp/Makefile.am (libntp_a_SOURCES): added gpstolfp.c source
|
|
|
|
* libntp/binio.c: added {get,put}_msb_{short,long}() functions
|
|
|
|
* include/ntp_fp.h: added gpstolfp() prototype
|
|
|
|
* include/binio.h: added binio MSB prototypes
|
|
|
|
Sat Jun 13 13:48:17 1998 Frank Kardel <kardel <AT> acm.org>
|
|
|
|
* parseutil/testdcf.c: signed/unsigned
|
|
SYSV clock name clash fixed
|
|
|
|
* parseutil/dcfd.c: signed/unsigned
|
|
SYSV clock name clash fixed
|
|
year wrapping at 1998
|
|
ctype macros take ints as args
|
|
|
|
* ntptrace/ntptrace.c (decodeipaddr): ctype macros take ints as args
|
|
|
|
* ntpq/ntpq_ops.c (doprintpeers): signed/unsigned
|
|
|
|
* ntpq/ntpq.c: ctype macros take ints as args
|
|
signed/unsigned
|
|
|
|
* ntpdc/ntpdc.c: signed/unsigned
|
|
|
|
* ntpd/refclock_usno.c: signed/unsigned
|
|
|
|
* ntpd/refclock_true.c (true_send): signed/unsigned, name clashes
|
|
|
|
* ntpd/refclock_parse.c: signed/unsigned, name clashes
|
|
|
|
* ntpd/refclock_nmea.c (nmea_receive): ctype macros take ints as args
|
|
|
|
* ntpd/refclock_heath.c (heath_receive): prototypes (signed/unsigned issues)
|
|
|
|
* ntpd/refclock_arc.c: prototypes (signed/unsigned issues)
|
|
|
|
* ntpd/refclock_acts.c: prototypes (signed/unsigned issues)
|
|
|
|
* ntpd/ntpd.c: prototypes (signed/unsigned issues)
|
|
|
|
* ntpd/ntp_util.c (getauthkeys): prototypes (signed/unsigned issues)
|
|
fix SYSV clock name clash
|
|
|
|
* ntpd/ntp_request.c: prototypes (signed/unsigned issues)
|
|
fix SYSV clock name clash
|
|
|
|
* ntpd/ntp_io.c (input_handler): variable naming, signed/unsigned
|
|
|
|
* ntpd/ntp_intres.c (readconf): signed/unsigned issues
|
|
|
|
* ntpd/ntp_control.c: prototypes (signed/unsigned issues)
|
|
fix SYSV clock name clash
|
|
|
|
* ntpd/ntp_config.c: fix SYSV clock name clash
|
|
ctype macros take ints as args
|
|
|
|
* libparse/parsestreams.c: dirt (debug) removed
|
|
|
|
* libparse/parsesolaris.c: more prototypes
|
|
fix name clashes
|
|
allow for ansi2knr
|
|
|
|
* libparse/parse.c: bcopy/memcpy cleanup
|
|
fix SYSV clock name clash
|
|
|
|
* libparse/clk_trimtsip.c (cvt_trimtsip): fix SYSV clock name clash
|
|
|
|
* libparse/clk_trimtaip.c (cvt_trimtaip): fix SYSV clock name clash
|
|
|
|
* libparse/clk_schmid.c (cvt_schmid): fix SYSV clock name clash
|
|
|
|
* libparse/clk_rcc8000.c (cvt_rcc8000): fix SYSV clock name clash
|
|
|
|
* libparse/clk_rawdcf.c (cvt_rawdcf): fix SYSV clock name clash
|
|
|
|
* libparse/clk_hopf6021.c (cvt_hopf6021): fix SYSV clock name clash
|
|
|
|
* libparse/clk_dcf7000.c (cvt_dcf7000): fix SYSV clock name clash
|
|
|
|
* libparse/clk_computime.c: fix SYSV clock name clash
|
|
|
|
* libntp/octtoint.c (octtoint): ctype macros take ints as args
|
|
|
|
* libntp/mstolfp.c (mstolfp): ctype macros take ints as args
|
|
|
|
* libntp/hextolfp.c (hextolfp): ctype macros take ints as args
|
|
|
|
* libntp/hextoint.c (hextoint): ctype macros take ints as args
|
|
|
|
* libntp/decodenetnum.c (decodenetnum): ctype macros take ints as args
|
|
|
|
* libntp/atouint.c (atouint): ctype macros take ints as args
|
|
|
|
* libntp/atolfp.c (atolfp): ctype macros take ints as args
|
|
|
|
* libntp/atoint.c (atoint): ctype macros take ints as args
|
|
|
|
* kernel/sys/parsestreams.h: STREAM macro gone in favor of HAVE_SYS_STREAM_H
|
|
|
|
* include/parse.h: STREAM macro gone in favor of HAVE_SYS_STREAM_H
|
|
|
|
Fri Jun 12 11:08:53 1998 Frank Kardel <kardel <AT> acm.org>
|
|
|
|
* ntpd/ntp_timer.c: prototype fixes (ansi2knr/knr compiler)
|
|
|
|
* ntpd/ntp_proto.c (make_keylist): type cast for e(!!!)malloc()
|
|
|
|
* libparse/Makefile.am: adjust for ansi2knr
|
|
|
|
* libntp/ieee754io.c: ansi2knr compatibility
|
|
|
|
* include/ntp_refclock.h: added pps_sample() extern declaration
|
|
added refclock_process_offset() extern declaration
|
|
|
|
* include/ntp.h: fixed function * prototypes
|
|
|
|
* ntpd/refclock_parse.c (bind): added input routine
|
|
(local_input): added input routine
|
|
|
|
* ntpd/ntp_io.c (input_handler): direct input processing for
|
|
refclocks to save input recv buffers
|
|
|
|
* include/ntp_refclock.h: added int io_input(struct recvbuf *)
|
|
pointer to allow direct processing of read refclock data in
|
|
order to save many bug recv buffers on single character input
|
|
(problem with "fast" machines)
|
|
|
|
* parse_conf.c: conditional compile macros fixed
|
|
|
|
* parse.c: conditional compile macros fixed
|
|
printf prototype
|
|
|
|
* clk_trimtaip.c: conditional compile macros fixed
|
|
printf prototype
|
|
|
|
* clk_schmid.c: conditional compile macros fixed
|
|
printf prototype
|
|
|
|
* clk_rcc8000.c: conditional compile macros fixed
|
|
printf prototype
|
|
|
|
* clk_hopf6021.c: conditional compile macros fixed
|
|
printf prototype
|
|
|
|
* clk_dcf7000.c: conditional compile macros fixed
|
|
printf prototype
|
|
|
|
* clk_computime.c: conditional compile macros fixed
|
|
printf prototype
|
|
|
|
Sat Jun 6 07:41:54 1998 Frank Kardel <kardel <AT> acm.org>
|
|
|
|
* ntpd/refclock_palisade.c: fixed termio.h / termios.h inclusion
|
|
|
|
* include/ntp_refclock.h: made refclockproc/clockdesc const
|
|
|
|
* ntpd/ntp_control.c (ctl_putpeer): avoided ambigous 'else' (gcc)
|
|
|
|
* ntpd/refclock_parse.c (parse_start): added BURST mode initialisation
|
|
|
|
* scripts/stats/summary.sh (CLOCK): allow for Y2K log files
|
|
|
|
* libparse/clk_rawdcf.c: simplified condidional compile expression
|
|
|
|
Wed May 27 08:10:43 1998 Frank Kardel <kardel <AT> acm.org>
|
|
|
|
* include/Makefile.am (noinst_HEADERS): added new header files
|
|
mbg_gps166.h binio.h ascii.h ieee754io.h
|
|
|
|
* ntpdc/ntpdc.c (sendrequest): fixed info_auth_keyid setting it
|
|
got accidentally trashed every other round
|
|
|
|
Mon May 25 22:55:07 1998 Frank Kardel <kardel <AT> acm.org>
|
|
|
|
* configure.in: PARSE clocks are enabled by default whenever
|
|
possible (termio.h or termios.h present)
|
|
removed RAWDCF_SETDTR feature
|
|
|
|
* acconfig.h: removed RAWDCF_SETDTR option (now implicit by
|
|
compilation and run time configuration)
|
|
|
|
* ntpd/refclock_parse.c (rawdcf_init): offer a RAWDCF clock (type 14)
|
|
that attempts to set the DTR modem line for receiver power
|
|
|
|
* libparse/clk_meinberg.c (cvt_meinberg): support current standard
|
|
Meinberg data formats
|
|
|
|
Sun May 24 09:43:19 1998 Frank Kardel <kardel <AT> acm.org>
|
|
|
|
* libparse/clk_rawdcf.c (pps_rawdcf): trigger pps on zero going
|
|
edge - that is simpler wiring (Rx->DCD).
|
|
|
|
* parseutil/testdcf.c (wday): const keyword
|
|
|
|
* parseutil/dcfd.c (cvt_rawdcf): sign issues and calling interfaces
|
|
|
|
* ntpq/ntpq.c (MAXVARLEN): adjusted internal buffer length for
|
|
variable values
|
|
|
|
* ntpd/refclock_parse.c: adjust to new io handling (fixed formats
|
|
only)
|
|
(mkreadable): don't include >"< in readable ASCII output (-> ntpq
|
|
parsing)
|
|
output debug messages to stdout instead of msyslog()
|
|
fixed version information string
|
|
|
|
* ntpd/refclock_atom.c (pps_sample): new auxiliary pps interface
|
|
|
|
* libparse/parsestreams.c (parserput): get event status consistent
|
|
with direct calls
|
|
(zs_xsisr): simulate CARRIER status to avoid unnecessary M_xHANGUP
|
|
events
|
|
|
|
* libparse/parsesolaris.c (parserput): get event status consistent
|
|
with direct calls
|
|
(zs_xsisr): simulate CARRIER status to avoid unnecessary M_xHANGUP
|
|
events
|
|
|
|
* libparse/parse.c: removed old input cruft
|
|
(parse_restart): new generic input help function
|
|
(parse_addchar): ditto
|
|
(parse_end): ditto
|
|
(pps_one): new generic pps help function
|
|
(pps_zero): ditto
|
|
|
|
* libparse/clk_trimtsip.c (clock_trimtsip =): new input handling
|
|
|
|
* libparse/clk_trimtaip.c (clock_trimtaip =): new input handling
|
|
(inp_trimtaip): new input handler
|
|
|
|
* libparse/clk_schmid.c (clock_schmid =): new input handling
|
|
(inp_schmid): new input handler
|
|
|
|
* libparse/clk_rcc8000.c (clock_rcc8000 =): new input handling
|
|
(inp_rcc8000): new input handler
|
|
|
|
* libparse/clk_rawdcf.c (clock_rawdcf =): new input handling
|
|
(snt_rawdcf): adjusted to new input handling
|
|
(inp_rawdcf): new input handler
|
|
|
|
* libparse/clk_meinberg.c (clock_meinberg): new input handling
|
|
(gps_input): new input handler
|
|
(mbg_input): new input handler
|
|
|
|
* libparse/clk_hopf6021.c (clock_hopf6021 =): new input handling
|
|
(inp_hopf6021): new input handler
|
|
|
|
* libparse/clk_dcf7000.c (clock_dcf7000 =): new input handling
|
|
(inp_dcf7000): new input handler
|
|
|
|
* libparse/clk_computime.c (clock_computime =): new input handling
|
|
(inp_computime): new input handler
|
|
|
|
* libparse/Makefile.am: link kernel module with libntp.a
|
|
|
|
* include/parse.h (struct parse): removed old data structure cruft
|
|
(new input model) new PARSE_INP* macros for input handling
|
|
removed old SYNC_* macros from old input model
|
|
(struct clockformat): removed old parse functions in favor of the
|
|
new input model
|
|
updated prototypes
|
|
|
|
* include/ntp_refclock.h: prototype for refclock_atom pps_sample()
|
|
interface
|
|
|
|
* acconfig.h: added PPS_SAMPLE define
|
|
* configure.in (LIBPARSE): added PPS_SAMPLE configuration
|
|
<refclock_atom aux interface>
|
|
|
|
* libntp/systime.c (adj_systime): debug output (> level 6) for
|
|
adjtime results
|
|
|
|
* libntp/mfp_mul.c (mfp_mul): controlled debug output
|
|
|
|
* libntp/ieee754io.c (get_byte): controlled debug output
|
|
(fetch_ieee754): ditto
|
|
(put_ieee754): ditto
|
|
|
|
Tue May 5 20:09:51 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: document DES is not usually present.
|
|
|
|
Wed Apr 29 22:00:22 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.72h
|
|
|
|
* authstuff/Makefile.am (check-local-rsn): check-local doesn't
|
|
work with RSAREF...
|
|
Reported by: "Auteria Wally Winzer Jr." <wally.winzer@champusa.com>
|
|
|
|
* libntp/machines.c: the settime() choices were ordered badly.
|
|
Reported by: Michael Joosten <joost@c-lab.de>
|
|
|
|
Sat Apr 25 00:35:53 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (ac_cv_var_no_parenb_ignpar): Undo the kernel PLL
|
|
block I just installed - Dave wants to control this via
|
|
KERNEL_FLL_BUG.
|
|
|
|
Fri Apr 24 20:35:57 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* libntp/Makefile.am (libntp_a_DEPENDENCIES): Set per libntp_a_LIBADD
|
|
|
|
* configure.in: Do a better job of blocking kernel PLL under
|
|
solaris2.6.
|
|
|
|
Fri Apr 24 00:41:12 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.72f
|
|
(ac_cv_struct_nlist_n_un): Don't look for ntp_adjtime or
|
|
ntp_gettime under solaris2.6.
|
|
|
|
* ntpd/ntp_proto.c (process_packet): Give verbose error messages
|
|
|
|
* include/global.h (PROTOTYPES): Drive via HAVE_PROTOTYPES.
|
|
|
|
Wed Apr 22 16:55:55 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (ac_cv_var_use_des): Added. 4.0.72e.
|
|
* libntp/Makefile.am (libntp_a_LIBADD): Added DESOBJS
|
|
|
|
Tue Apr 21 02:08:06 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_arc.c (arc_receive): Typo...
|
|
From: Sam Steingold <sds@usa.net>
|
|
|
|
Fri Apr 10 03:05:35 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (ac_refclock_chu): AUDIO_CHU support. Disabled by
|
|
default, and currently only supported on SunOS and Solaris.
|
|
* acconfig.h: AUDIO_CHU
|
|
|
|
Wed Apr 8 19:53:53 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* libntp/Makefile.am (EXTRA_DIST): Added mktime.c
|
|
|
|
* configure.in: AC_REPLACE_FUNCS(mktime).
|
|
(--enable-dst-minutes=60): Added, for (missing) mktime().
|
|
|
|
* ntpd/refclock_heath.c (heath_receive): Use mktime() instead of
|
|
the old hack.
|
|
|
|
Tue Apr 7 21:15:14 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (LIBOBJS): Hack it before AC_OUTPUT to deal with
|
|
ANSI2KNR-filtering rules.
|
|
From: Jim Meyering <meyering@ascend.com>
|
|
|
|
Mon Apr 6 01:40:45 1998 Harlan Stenn <stenn@grundoon.udel.edu>
|
|
|
|
* libntp/strerror.c: ANSIfy strerror's definition.
|
|
|
|
Thu Mar 12 20:24:45 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* libntp/statestr.c: Only #include <config.h> if HAVE_CONFIG_H is
|
|
#define'd.
|
|
From: Sven Dietrich <Sven_Dietrich@Trimble.COM>
|
|
|
|
Wed Mar 11 00:27:32 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: Cygwin needs to check for the advapi32 library.
|
|
NT doesn't support a root user, so don't bother with getuid().
|
|
Also, don't bother with umask().
|
|
|
|
* ntpd/ntp_io.c: cygwin32 patches
|
|
* ntpd/ntp_proto.c: Ditto.
|
|
* ntpd/ntpd.c: Ditto.
|
|
* ntpd/ntp_timer.c: Ditto.
|
|
* ntpdate/ntpdate.c: Ditto.
|
|
* libntp/machines.c: Ditto.
|
|
* libntp/systime.c: Ditto.
|
|
* include/ntp_machine.h: Ditto.
|
|
* include/ntp_unixtime.h: Ditto.
|
|
From: Sven Dietrich <Sven_Dietrich@Trimble.COM>
|
|
|
|
Tue Mar 10 22:26:14 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (ac_cv_make_tickadj): Added.
|
|
Now that tickadj is the only(?) utility that cares about tick and
|
|
tickadj, we don't need to have NOKMEM and no PRESET_* be fatal.
|
|
|
|
Sat Mar 7 02:57:17 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_loopfilter.c (local_clock): Patch STA_FLL check
|
|
From: Poul-Henning Kamp <phk@freebsd.org>
|
|
|
|
* various: Renamed ACTS to CLOCK_ACTS, ARBITER to CLOCK_ARBITER,
|
|
ARCRON_MSF to CLOCK_ARCRON_MSF, AS2201 to CLOCK_AS2201, BANC to
|
|
CLOCK_BANC, DATUM to CLOCK_DATUM, GPSVME to CLOCK_GPSVME, HEATH to
|
|
CLOCK_HEATH, HPGPS to CLOCK_HPGPS, IRIG to CLOCK_IRIG, JUPITER to
|
|
CLOCK_JUPITER, LEITCH to CLOCK_LEITCH, MSFEES to CLOCK_MSFEES,
|
|
MX4200 to CLOCK_MX4200, NMEA to CLOCK_NMEA, PALISADE to
|
|
CLOCK_PALISADE, PARSE to CLOCK_PARSE, PPS720 to CLOCK_PPS720, PST
|
|
to CLOCK_PST, PTBACTS to CLOCK_PTBACTS, SHM_CLOCK to CLOCK_SHM,
|
|
ONCORE to CLOCK_ONCORE, TPRO to CLOCK_TPRO, TRAK to CLOCK_TRAK,
|
|
TRUETIME to CLOCK_TRUETIME, USNO to CLOCK_USNO, WWVB to CLOCK_WWVB
|
|
|
|
* Makefile.am (ETAGS_ARGS): Added acconfig.h
|
|
|
|
* various: Renamed LOCAL_CLOCK to CLOCK_LOCAL.
|
|
|
|
* configure.in: First cut at *-pc-cygwin32 support
|
|
Requested by: Sven Dietrich <Sven_Dietrich@Trimble.COM>
|
|
|
|
* configure.in: gdt-surveying code is gone. Sigh.
|
|
Reported by: Poul-Henning Kamp <phk@critter.freebsd.dk>
|
|
|
|
Wed Mar 4 21:41:06 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* many places: Renamed ATOM to CLOCK_ATOM
|
|
|
|
Tue Mar 3 03:18:13 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_timer.c (timer): Only call refclock_transmit if
|
|
REFCLOCK is #define'd.
|
|
Reported by a bunch of folks.
|
|
|
|
Mon Mar 2 03:46:07 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (ntp_refclock): Use CLOCK_CHU, which no longer
|
|
needs any special headers.
|
|
* ntpd/refclock_chu.c: Call it CLOCK_CHU
|
|
(chu_receive): Define it correctly.
|
|
|
|
* include/winnt/sys/time.h (gettimeofday): Prototypes are OK.
|
|
(settimeofday): Prototypes are OK.
|
|
From: JJEVNISEK@qgraph.com
|
|
|
|
* ntpq/ntpq_ops.c: varlist name and value aren't const.
|
|
* ntpdc/ntpdc_ops.c (fudge): The flags are u_val, not val.
|
|
* ntpdc/ntpdc.c: const cleanup, exit cleanup.
|
|
* ntpd/refclock_wwvb.c (wwvb_receive): Move the definition of tz
|
|
somewhere more normal.
|
|
* ntpd/ntp_request.c (do_trustkey): kp gets u_long data, not
|
|
u_int32 (but Harlan thinks this patch may be wrong).
|
|
* ntpd/ntp_refclock.c (refclock_process): clocktime needs
|
|
offset.l_ui, not offset.l_i .
|
|
* ntpd/ntp_control.c (set_var): t isn't const.
|
|
* libntp/a_md5encrypt.c (session_key): Cast 2nd arg to MD5auth_setkey.
|
|
* include/ntpd.h: ctl_var's text field isn't const.
|
|
* include/ntp_refclock.h: clockdesc isn't const.
|
|
From: Marc Brett <Marc.Brett@waii.com>
|
|
|
|
* ntpd/ntp_loopfilter.c (local_clock): Limit ntv.constant to
|
|
MAXTC, and log error returns from ntp_adjtime.
|
|
From: Juha Sarlin <juha@c3l.tyreso.se>
|
|
|
|
Mon Mar 2 03:05:23 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (ac_cv_var_kernel_fll_bug): KERNEL_FLL_BUG
|
|
* acconfig.h: KERNEL_FLL_BUG: added.
|
|
* ntpd/ntp_loopfilter.c (local_clock): Only avoid STA_FLL if
|
|
KERNEL_FLL_BUG is #define'd (Solaris2.6)
|
|
|
|
Sat Feb 21 00:45:10 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* automake-1.2d.patches: Added ansi2knr.o rules.
|
|
|
|
* ntpd/refclock_tpro.c: P() stuff
|
|
|
|
Fri Feb 20 20:10:20 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: Improve the ${CC} -pipe test (cygwin-32's gcc -pipe
|
|
silently does nothing).
|
|
Reported by: Sven Dietrich <Sven_Dietrich@Trimble.COM>
|
|
|
|
Wed Feb 18 00:51:08 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in: 4.0.72 released.
|
|
|
|
* configure.in:AC_REPLACE_FUNCS(strerror), check for poll.h, and deal
|
|
with the --enable-JUPITER stuff.
|
|
* libntp/Makefile.am (libntp_a_LIBADD): Added (for strerror support).
|
|
* libntp/clocktypes.c: Added REFCLK_GPS_JUPITER.
|
|
* ntpdate/ntpdate.c: poll() support
|
|
* ntpd/Makefile.am: Add refclock_jupiter.c
|
|
* ntpd/refclock_conf.c: Added refclock_jupiter
|
|
* ntpd/refclock_mx4200.c (mx4200_pps): Bugfixes.
|
|
* include/ntp.h (REFCLK_GPS_JUPITER): Added, and bumped REFCLK_MAX.
|
|
From: Craig Leres <leres@ee.lbl.gov>
|
|
|
|
Mon Feb 16 21:02:42 1998 Harlan Stenn <stenn@grundoon.udel.edu>
|
|
|
|
* ntpd/ntp_proto.c: P()
|
|
|
|
Mon Feb 16 12:43:11 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* include/ntp_types.h: Added P() prototyping hack back in.
|
|
* include/parse.h: Ditto.
|
|
* include/ntpd.h: Ditto.
|
|
* include/ntp_unixtime.h: Ditto.
|
|
* include/ntp_stdlib.h: Ditto.
|
|
* include/ntp_select.h: Ditto.
|
|
* include/ntp_refclock.h: Ditto.
|
|
* include/ntp_fp.h: Ditto.
|
|
* include/md5.h: Ditto.
|
|
* include/ntp_filegen.h: Ditto.
|
|
* include/ntp_calendar.h: Ditto.
|
|
* include/l_stdlib.h: Ditto.
|
|
|
|
* configure.in (ACTS): Sometimes, TIOCMBIS is in sys/ioctl.h
|
|
Reported by Kenneth Jaldehag <kenneth.jaldehag@sp.se>
|
|
* configure.in (HEATH): Ditto.
|
|
* configure.in (PTBACTS): Ditto.
|
|
* configure.in (USNO): Ditto.
|
|
|
|
Sat Feb 14 00:02:14 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_irig.c (irig_rf): Rename sincos[] to sin_cos[].
|
|
|
|
Fri Feb 13 22:22:08 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* include/ntp.h (RANDPOLL): Use random or mrand48.
|
|
* ntpd/ntp_config.c (do_resolve_internal): Ditto.
|
|
* ntpd/ntp_peer.c (unpeer): Ditto.
|
|
* ntpd/ntp_proto.c (make_keylist): Ditto.
|
|
|
|
* ntpd/ntpd.c (xntpdmain): Use srandom or srand48.
|
|
|
|
* configure.in: Look for {s,}random() and [ms]rand48().
|
|
|
|
Wed Feb 11 22:50:24 1998 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/ntp_restrict.c (hack_restrict): Renamed restrict()
|
|
* include/ntpd.h: Ditto
|
|
* ntpd/ntp_request.c (do_restrict): Ditto
|
|
* ntpd/ntp_config.c (getconfig):
|
|
* ntpd/ntp_io.c (create_sockets): Ditto.
|
|
|
|
1998-01-23 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_irig.c: Allow either <sun/audioio.h> or
|
|
<sys/audioio.h> . From Dave Mills.
|
|
|
|
* configure.in: Under SunOS, it's sun/audioio.h .
|
|
|
|
1998-01-22 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* html/driver6.html: Updated header file info
|
|
* html/irig.html: Ditto.
|
|
* configure.in: sys/bsd_audioirig.h replaced with sys/audioio.h
|
|
for new irig driver that Dave installed.
|
|
|
|
1998-01-08 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* Many places: Lose the P(()) prototype stuff
|
|
|
|
* util/tickadj.c (writevar): Make offset an off_t
|
|
(readvar): Ditto
|
|
(getoffsets): Make offsets off_t
|
|
|
|
* adjtimed/adjtimed.c (GetClockRate): Fix lseek arg 2.
|
|
(SetClockRate): Ditto
|
|
|
|
* Many things in many places from many people.
|
|
|
|
* configure.in: Added AC_TYPE_OFF_T
|
|
|
|
1997-11-26 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* ntpd/refclock_palisade.c: ANSIfied.
|
|
|
|
Wed Sep 3 23:51:44 1997 Harlan Stenn <stenn@whimsy.udel.edu>
|
|
|
|
* configure.in (AM_C_PROTOTYPES): Added.
|
|
|
|
* Makefile.am (AUTOMAKE_OPTIONS): Added ansi2knr.
|
|
|