Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/etc/MAKEDEV.tmpl

2545 lines
61 KiB
Bash
Raw Blame History

#!/bin/sh -
# $NetBSD: MAKEDEV.tmpl,v 1.233 2022/12/28 19:23:02 jakllsch Exp $
#
# Copyright (c) 2003,2007,2008 The NetBSD Foundation, Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
#
###########################################################################
#
# PLEASE RUN "cd ../share/man/man8 ; make makedevs"
# AFTER CHANGING THIS FILE, AND COMMIT THE UPDATED MANPAGE!
#
###########################################################################
#
# Device "make" file. Valid special arguments:
# all makes all known devices, including local devices.
# Tries to make the 'standard' number of each type.
# init A set of devices that is used for MFS /dev by init.
# May be equal to "all".
# floppy devices to be put on install floppies
# ramdisk devices to be put into INSTALL kernel ramdisks.
# std standard devices
# local configuration specific devices
# lua Lua device
# wscons make wscons devices
# usbs make USB devices
#
# Tapes:
# st* SCSI tapes
# wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape
# ht* MASSBUS TM03 and TU??
# mt* MSCP tapes (e.g. TU81, TK50)
# tm* UNIBUS TM11 and TE10 emulations (e.g. Emulex TC-11)
# ts* UNIBUS TS11
# ut* UNIBUS TU45 emulations (e.g. si 9700)
# uu* TU58 cassettes on DL11 controller
#
# Disks:
# dk* wedge disk slices
# ccd* concatenated disk devices
# cd* SCSI or ATAPI CD-ROM
# cgd* cryptographic disk devices
# raid* RAIDframe disk devices
# sd* SCSI disks
# wd* "winchester" disk drives (ST506,IDE,ESDI,RLL,...)
# bmd* Nereid bank memory disks
# ed* IBM PS/2 ESDI disk devices
# fd* "floppy" disk drives (3 1/2", 5 1/4")
# fss* Files system snapshot devices
# gdrom* Dreamcast "gigadisc" CD-ROM drive
# hk* UNIBUS RK06 and RK07
# hp* MASSBUS RM??
# ld* Logical disk devices (e.g., hardware RAID)
# mcd* Mitsumi CD-ROM
# md* memory pseudo-disk devices
# ofdisk* OpenFirmware disk devices
# ra* MSCP disks (RA??, RD??)
# rb* 730 IDC w/ RB80 and/or RB02
# rd* HDC9224 RD disks on VS2000
# rl* UNIBUS RL02
# rx* MSCP floppy disk (RX33/50/...)
# up* other UNIBUS devices (e.g. on Emulex SC-21V controller)
# vnd* "file" pseudo-disks
# xbd* Xen virtual disks
# xd* Xylogic 753/7053 disks
# xy* Xylogic 450/451 disks
#
# Pointing devices:
# wsmouse* wscons mouse events
# lms* Logitech bus mouse
# mms* Microsoft bus mouse
# qms* "quadrature mouse"
# pms* PS/2 mouse
# mouse mouse (provides events, for X11)
#
# Keyboard devices:
# wskbd* wscons keyboard events
# kbd raw keyboard (provides events, for X11)
# kbdctl keyboard control
#
# Terminals/Console ports:
# tty[01]* standard serial ports
# tty0* SB1250 ("sbscn") serial ports (sbmips)
# ttyE* wscons - Workstation console ("wscons") glass-tty emulators
# ttyCZ? Cyclades-Z multiport serial boards. Each "unit"
# makes 64 ports.
# ttyCY? Cyclom-Y multiport serial boards. Each "unit" makes
# 32 ports.
# ttye* ITE bitmapped consoles
# ttyv0 pccons
# ttyC? NS16550 ("com") serial ports
# ttyS* SA1110 serial port (hpcarm)
# ttyTX? TX39 internal serial ports (hpcmips)
# ttyB? DEC 3000 ZS8530 ("scc") serial ports (alpha)
# ttyA* mfc serial ports (amiga)
# ttyB* msc serial ports (amiga)
# ttyC* com style serial ports (DraCo, HyperCom) (amiga)
# On the DraCo, units 0 and 1 are the built-in "modem" and
# "mouse" ports, if configured.
# ttyA0 8530 Channel A (formerly ser02) (atari)
# ttyA1 8530 Channel B (formerly mdm02) (atari)
# ttyB0 UART on first 68901 (formerly mdm01) (atari)
# ixpcom IXP12x0 COM ports
# epcom EP93xx COM ports
# plcom ARM PL01[01] serial ports
# wmcom EPOC Windermere COM ports
# ttyM? HP200/300 4 port serial mux interface (hp300)
# ttya "ttya" system console (luna68k)
# ttyb second system serial port (luna68k)
# tty* Onboard serial ports (mvme68k)
# On the mvme147 these are: ttyZ1, ttyZ2 and ttyZ3.
# On the mvme167, and '177: ttyC1, ttyC2 and ttyC3.
# Note that tty[CZ]0 is grabbed by the console device
# so is not created by default
# dc* PMAX 4 channel serial interface (kbd, mouse, modem, printer)
# scc* 82530 serial interface (pmax)
# ttyZ* Zilog 8530 ("zstty") serial ports
# tty[abcd] Built-in serial ports (sparc)
# tty* Z88530 serial controllers (sparc64)
# ttyh* SAB82532 serial controllers (sparc64)
# tty[a-j] Built-in serial ports (sun2, sun3)
# ttyC? pccons (arc)
# dz* UNIBUS DZ11 and DZ32 (vax)
# dh* UNIBUS DH11 and emulations (e.g. Able DMAX, Emulex CS-11) (vax)
# dmf* UNIBUS DMF32 (vax)
# dhu* UNIBUS DHU11 (vax)
# dmz* UNIBUS DMZ32 (vax)
# dl* UNIBUS DL11 (vax)
# xencons Xen virtual console
# ttyVI?? viocon(4)
#
# Terminal multiplexors:
# dc* 4 channel serial interface (keyboard, mouse, modem, printer)
# dh* UNIBUS DH11 and emulations (e.g. Able DMAX, Emulex CS-11)
# dhu* UNIBUS DHU11
# dl* UNIBUS DL11
# dmf* UNIBUS DMF32
# dmz* UNIBUS DMZ32
# dz* UNIBUS DZ11 and DZ32
# scc* 82530 serial interface
#
# Call units:
# dn* UNIBUS DN11 and emulations (e.g. Able Quadracall)
#
# Pseudo terminals:
# ptm pty multiplexor device, and pts directory
# pty* set of 16 master and slave pseudo terminals
# opty first 16 ptys, to save inodes on install media
# ipty first 2 ptys, for install media use only
#
# Printers:
# arcpp* Archimedes parallel port
# lpt* stock lp
# lpa* interruptless lp
# par* Amiga motherboard parallel port
# cpi* Macintosh Nubus CSI parallel printer card
#
# USB devices:
# usb* USB control devices
# uhid* USB generic HID devices
# ulpt* USB printer devices
# ugen* USB generic devices
# ttyHS* USB Option N.V. modems
# ttyU* USB modems
# ttyY* USB serial adapters
#
# Video devices:
# bwtwo* monochromatic frame buffer
# cgtwo* 8-bit color frame buffer
# cgthree* 8-bit color frame buffer
# cgfour* 8-bit color frame buffer
# cgsix* accelerated 8-bit color frame buffer
# cgeight* 24-bit color frame buffer
# etvme Tseng et-compatible cards on VME (atari)
# ik* UNIBUS interface to Ikonas frame buffer
# leo Circad Leonardo VME-bus true color (atari)
# ps* UNIBUS interface to Picture System 2
# qv* QVSS (MicroVAX) display
# tcx* accelerated 8/24-bit color frame buffer
#
# Maple bus devices:
# maple Maple bus control devices
# mlcd* Maple bus LCD devices
# mmem* Maple bus storage devices
#
# IEEE1394 bus devices:
# fw* IEEE1394 bus generic node access devices
# fwmem* IEEE1394 bus physical memory of the remote node access devices
#
# Special purpose devices:
# ad* UNIBUS interface to Data Translation A/D converter
# agp* AGP GART devices
# altq ALTQ control interface
# amr* AMI MegaRaid control device
# apm power management device
# audio* audio devices
# bell* OPM bell device (x68k)
# bktr Brooktree 848/849/878/879 based TV cards
# bpf packet filter
# bthub Bluetooth Device Hub control interface
# cfs* Coda file system device
# ch* SCSI media changer
# cir* Consumer IR
# clockctl clock control for non root users
# cpuctl CPU control
# crypto hardware crypto access driver
# dmoverio hardware-assisted data movers
# dpt* DPT/Adaptec EATA RAID management interface
# dpti* DPT/Adaptec I2O RAID management interface
# drm* Direct Rendering Manager interface
# dtv* Digital TV interface
# fb* PMAX generic framebuffer pseudo-device
# fd file descriptors
# gpiopps* 1PPS signals on GPIO pins
# grf* graphics frame buffer device
# hdaudio* High Definition audio control device
# hdmicec* HDMI CEC devices
# hil HP300 HIL input devices
# icp ICP-Vortex/Intel RAID control interface
# iic* IIC bus device
# io x86 IOPL access for COMPAT_10, COMPAT_FREEBSD
# iop* I2O IOP control interface
# ipmi* OpenIPMI compatible interface
# ipl IP Filter
# irframe* IrDA physical frame
# ite* terminal emulator interface to HP300 graphics devices
# joy* joystick device
# kttcp kernel ttcp helper device
# lockstat kernel locking statistics
# magma* Magma multiport serial/parallel cards
# midi* MIDI
# mfi* LSI MegaRAID/MegaSAS control interface
# mlx* Mylex DAC960 control interface
# mly* Mylex AcceleRAID/eXtremeRAID control interface
# np* UNIBUS Ethernet co-processor interface, for downloading.
# npf NPF packet filter
# nvme* Non-Volatile Memory Host Controller Interface device driver
# nvme*ns* Non-Volatile Memory namespace
# nvmm NetBSD Virtual Machine Monitor
# openfirm OpenFirmware accessor
# pad* Pseudo-audio device driver
# pci* PCI bus access devices
# pf PF packet filter
# putter Pass-to-Userspace Transporter
# px* PixelStamp Xserver access
# qemufwcfg* QEMU Firmware Configuration
# radio* radio devices
# random Random number generator
# rtc* RealTimeClock
# scmd* Sparkfun Serial Controlled Motor Driver
# scsibus* SCSI busses
# se* SCSI Ethernet
# ses* SES/SAF-TE SCSI Devices
# sht3xtemp* Sensirion SHT3X temperature and humidity device driver
# speaker PC speaker (XXX - installed)
# spi* SPI bus device
# sram battery backuped memory (x68k)
# srt* source-address based routing
# ss* SCSI scanner
# stic* PixelStamp interface chip
# sysmon System Monitoring hardware
# tap* virtual Ethernet device
# tprof task profiler
# tun* network tunnel driver
# twa 3ware Apache control interface
# twe 3ware Escalade control interface
# uk* unknown SCSI device
# veriexec Veriexec fingerprint loader
# vhci virtual host controller interface
# video* video capture devices
# view* generic interface to graphic displays (Amiga)
# wsfont* console font control
# wsmux* wscons event multiplexor
# xenevt Xen event interface
#
# iSCSI communication devices
# iscsi* iSCSI driver and /sbin/iscsid communication
#
# Trusted Computing devices
# tpm Trusted Platform Module
#
# Debugging and tracing
# dtrace Dynamic tracing framework
#
# NOTE:
#
# * MAKEDEV is used both as a standalone script (via "sh ./MAKEDEV
# all" or similar), and as a function library for MAKEDEV.local (via
# "MAKEDEV_AS_LIBRARY=1 . MAKEDEV"). Because of this, the script
# should consist almost entirely of function definitions, apart from a
# few lines right at the end.
#
# * MAKEDEV may be executed in an environment that is missing some
# common commands. For example, it may be executed from a minimal
# system used during installation, or it may be executed early in the
# boot sequence before most file systems have been mounted. It may
# also be executed in a cross-build environment on a non-NetBSD host.
#
usage()
{
cat 1>&2 << _USAGE_
Usage: ${0##*/} [-fMsu] [-m mknod] [-p pax] [-t mtree] special [...]
Create listed special devices. Options:
-f Force permissions to be updated on existing devices.
-M Create memory file system.
-m mknod Name of mknod(8) program. [\$TOOL_MKNOD or mknod]
-p pax Name of pax(1) program. [\$TOOL_PAX or pax]
-s Generate mtree(8) specfile instead of creating devices.
-t mtree Name of mtree(8) program. [\$TOOL_MTREE or mtree]
-u Don't re-create devices that already exist.
_USAGE_
exit 1
}
# zeropad width number
# display number with a zero (`0') padding of width digits.
#
zeropad()
{
case $(($1 - ${#2})) in
5) echo 00000$2;;
4) echo 0000$2;;
3) echo 000$2;;
2) echo 00$2;;
1) echo 0$2;;
0) echo $2;;
*) die "bad padding" ;;
esac
}
# hexprint number
# display (base10) number as hexadecimal
#
hexprint()
{
val="$(($1 + 0))"
hex=
set -- 0 1 2 3 4 5 6 7 8 9 a b c d e f
while [ "$val" -gt 0 ]; do
eval hex=\${$(($val % 16 + 1))}\$hex
val="$(($val / 16))"
done
echo "${hex:-0}"
}
# linecount multiline_string
# count the number of lines in the string
#
linecount()
{
local IFS='
' # just a newline, no other white space between the quotes
set -- $1
echo $#
}
# nooutput -12 cmd [args...]
# run a command with stdout and/or stderr ignored.
# "nooutput -1 cmd" is like "cmd >/dev/null";
# "nooutput -2 cmd" is like "{ cmd ; } 2>/dev/null";
# "nooutput -12 cmd" is like "{ cmd ; } >/dev/null 2>&1";
# except they should work even if /dev/null doesn't [yet] exist.
#
# The "{...}" wrapper used in cases where stderr is redirected
# serves to capture shell error messages such as "cmd: not found".
#
nooutput()
{
local flags="$1" ; shift
local junk
case "$flags" in
"-1") junk="$( "$@" )" ;;
"-2") ( exec 4>&1 ; junk="$( { "$@" ; } 2>&1 1>&4 )" ) ;;
"-12") junk="$( { "$@" ; } 2>&1 )" ;;
*) warn "Incorrect use of nooutput" ;;
esac
}
# check_pax path_to_pax
# Check whether pax exists and supports the command line options
# and input format that we will want to use.
#
check_pax()
{
local pax="$1"
echo ". type=dir optional" | nooutput -12 "${pax}" -r -w -M -pe .
}
# check_mtree path_to_mtree
# Check whether mtree exists and supports the command line options
# and input format that we will want to use.
#
check_mtree()
{
local mtree="$1"
echo ". type=dir optional" | nooutput -12 "${mtree}" -e -U
}
# setup args...
# Parse command line arguments, exit on error.
# Callers should shift $((OPTIND - 1)) afterwards.
#
setup()
{
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/rescue
: ${HOST_SH:=sh}
: ${TOOL_MKNOD:=mknod}
: ${TOOL_MTREE:=mtree}
: ${TOOL_PAX:=pax}
status=0
do_create_mfs=false
do_force=false
do_mknod=false
do_pax=false
do_mtree=false
do_redirect=false
do_specfile=false
do_update=false
opts=
while getopts Mfm:p:st:u ch; do
# Note that $opts is only for options passed through to
# MAKEDEV.local, not for all options.
case ${ch} in
M)
# "-M" sets do_create_mfs;
# "-M -M" is for use from init(8), and sets do_redirect
do_redirect=$do_create_mfs
do_create_mfs=true
;;
f) do_force=true
opts="${opts} -f"
;;
m) TOOL_MKNOD=${OPTARG}
do_mknod=true
opts="${opts} -m ${OPTARG}"
;;
p) TOOL_PAX="${OPTARG}"
if check_pax "${TOOL_PAX}"; then
do_pax=true
# do not add this to $opts; we will later
# add "-s" instead.
else
warn "Ignored -p option:" \
"${TOOL_PAX} is missing or broken"
do_mknod=true
fi
;;
s) do_specfile=true
opts="${opts} -s"
;;
t) TOOL_MTREE="${OPTARG}"
if check_mtree "${TOOL_MTREE}"; then
do_mtree=true
# do not add this to $opts; we will later
# add "-s" instead.
else
warn "Ignored -t option:" \
"${TOOL_MTREE} is missing or broken"
do_mknod=true
fi
;;
u)
do_update=true
opts="${opts} -u"
;;
*) usage ;;
esac
done
shift $((${OPTIND} - 1))
[ $# -gt 0 ] || usage
u_root="%uid_root%"
u_uucp="%uid_uucp%"
g_gpio="%gid__gpio%"
g_kmem="%gid_kmem%"
g_ntpd="%gid_ntpd%"
g_nvmm="%gid_nvmm%"
g_operator="%gid_operator%"
g_wheel="%gid_wheel%"
dialin=0
dialout=524288
callunit=262144
# only allow read&write for owner by default
umask 077
# Set fdesc_mounted=true if the fdesc file system is mounted
# on the current directory (typically "/dev").
# Later, this will be used to suppress creation of device nodes
# that are supplied by the fdesc file system.
#
fdesc_mounted=false
if [ -d fd ]; then
# Parse the output from "mount -u -o nosuchoption .".
# We don't parse the output from df(1) because that's
# less likely to be available on install media.
#
# If the current directory is a mount point for the
# fdesc file system, then the expected output (whether
# or not the current user is root) is:
# mount_fdesc: -o suchoption: option not supported.
#
# If the current directory is not a mount point, then
# the expected output is:
# mount: .: unknown special file or file system.
#
# If we are not running on NetBSD, or mount(8) is not
# found, then we should get some other error message.
#
case "$({ LC_ALL=C mount -u -o nosuchoption . ; } 2>&1)" in
*mount_fdesc*) fdesc_mounted=true ;;
esac
fi
# do_force requires mknod
if $do_force; then
if $do_mtree || $do_pax || $do_specfile; then
die "-f option works only with mknod"
fi
do_mknod=true
fi
# do_force and do_update do not work together
if $do_force && $do_update; then
die "-f and -u options do not work together"
fi
# If no explicit method was specified on the command line or
# forced above, then use one of mtree, pax, or mknod, in that
# order of preference.
#
# mtree is preferred because it's fast and designed for the
# purpose. However, it's unlikely to be available early in the
# boot sequence, when init(8) may invoke MAKEDEV(8).
#
# pax is usually acceptable, and it's likely to be available
# early in the boot sequence. However, it's much slower than mtree.
#
# mknod is just very slow, because the shell has to fork for
# each device node.
#
case ",${do_mtree},,${do_pax},,${do_mknod},,${do_specfile}," in
( ,false,,false,,false,,false, )
if check_mtree "${TOOL_MTREE}"; then
do_mtree=true
elif check_pax "${TOOL_PAX}"; then
do_pax=true
else
do_mknod=true
fi
;;
( *,true,*,true,* )
die "-m, -p, -s, and -t options are mutually exclusive"
;;
esac
# If we are using mknod, then decide what options to pass it.
MKNOD="${TOOL_MKNOD:-mknod} -F netbsd"
if $do_mknod; then
if $do_force; then
MKNOD="${MKNOD} -R"
else
MKNOD="${MKNOD} -r"
fi
fi
# do_mtree or do_pax internally implies do_specfile.
# This happens after checking for mutually-exclusive options.
if $do_mtree || $do_pax && ! $do_specfile; then
do_specfile=true
opts="${opts} -s"
fi
}
# specfile_before
# This is called before the bulk of the makedev processing,
# if do_specfile is set.
#
# It simply prints ". type=dir optional", which must be the
# first line of the specfile.
#
specfile_before()
{
echo ". type=dir optional"
}
# mtree_after
# Output in specfile format is piped into this function.
#
# It uses mtree to create the devices defined in the specfile.
#
mtree_after()
{
nooutput -1 "${TOOL_MTREE}" -e -U
}
# pax_after
# Output in specfile format is piped into this function.
#
# It uses pax to create the devices defined in the specfile.
#
pax_after()
{
# Run pax in an empty directory, so it pays
# attention only to the specfile, without being
# confused by the existing contents of the target
# directory. Without this, pax would complain "file
# would overwrite itself" for already-existing
# device nodes.
tmpdir=./tmp.$$
mkdir "${tmpdir}" || die "can't create temporary directory"
cd "${tmpdir}" || die "can't cd to temporary directory"
"${TOOL_PAX}" -r -w -M -pe ..
pax_status=$?
cd .. # back to where we started
rmdir "${tmpdir}"
return $pax_status
}
# makedev_main makedev_name args...
# Perform most of the work of the main program. makedev_name
# is typically "makedev", but may be the name of some other
# makedev-like function (if we are invoked from MAKEDEV.local or
# some other script). The other args to this function are the
# command line args with which the MAKEDEV (or MAKEDEV.local)
# script was invoked.
#
makedev_main()
{
local makedev="$1" ; shift
# Parse command line args
setup ${1+"$@"}
shift $((${OPTIND}-1))
if $do_create_mfs; then
# Count inodes and create mfs file system.
# The makedev call merely updates $count_nodes.
count_nodes=0
$makedev ${1+"$@"}
create_mfs_dev $count_nodes
unset count_nodes
fi
# Set before, middle, and after variables, so we can do
# something like "( $before && $middle ) | $after",
# except it will have to be more complex so we can capture
# the exit status from both sides of the pipe.
#
if $do_specfile; then
before=specfile_before
else
before=:
fi
middle='$makedev ${1+"$@"} && (exit $status)'
if $do_mtree; then
after=mtree_after
elif $do_pax ; then
after=pax_after
else
after=cat
fi
# Actually perform the "{ $before && $middle } | $after" commands.
#
# We go to some trouble to ensure that, if any of
# $before, $middle, or $after fails, then we also
# exit with a non-zero status.
#
# In the block below, fd 3 is a copy of the original stdout,
# and fd 4 goes to a subshell that analyses the exit status
# status from the other commands.
#
{
exec 3>&1;
{
{ eval "$before" && eval "$middle"; echo $? >&4; } \
| { eval "$after"; echo $? >&4; } \
} 4>&1 1>&3 \
| (
read status1;
read status2;
case "$status1,$status2" in
0,0) exit 0;;
0,*) exit $status2;;
*,*) exit $status1;;
esac
)
}
}
#
# functions available to create nodes:
#
# mkdev name [b|c] major minor [mode{=600} [gid{=0} [uid{=0}]]]
# create device node `name' with the appropriate permissions
#
# lndev src target
# create a symlink from src to target
#
# makedir dir mode
# create directory with appropriate mode
#
mkdev()
{
if [ -n "$count_nodes" ]; then
count_nodes=$((count_nodes + 1))
return
fi
if $do_update && test -e $1; then
return
fi
if $do_specfile; then
case $2 in
b) type=block ;;
c) type=char ;;
esac
echo "./$1 type=${type} device=netbsd,$3,$4 mode=${5:-600} gid=${6:-$g_wheel} uid=${7:-$u_root}"
else
${MKNOD} -m ${5:-600} -g \#${6:-$g_wheel} -u \#${7:-$u_root} $1 $2 $3 $4
fi
}
lndev()
{
if [ -n "$count_nodes" ]; then
count_nodes=$((count_nodes + 1))
return
fi
if $do_update && test -e $2; then
return
fi
if $do_specfile; then
echo "./$2 type=link link=$1 mode=0700 gid=$g_wheel uid=$u_root"
else
ln -f -s $1 $2
fi
}
makedir()
{
if [ -n "$count_nodes" ]; then
count_nodes=$((count_nodes + 1))
return
fi
if $do_update && test -e $1; then
return
fi
if $do_specfile; then
echo "./$1 type=dir mode=$2 gid=$g_wheel uid=$u_root"
else
nooutput -2 mkdir $1
chmod $2 $1
fi
}
warn()
{
echo 1>&2 "$0: $*"
status=1
}
die()
{
echo 1>&2 "$0: $*"
exit 1
}
# makedev special [...]
# the main loop
#
makedev()
{
for i
do
case $i in
%MD_DEVICES%
all)
makedev all_md
makedev std fd ptm
makedev dk0 dk1 dk2 dk3 dk4 dk5 dk6 dk7
makedev dk8 dk9 dk10 dk11 dk12 dk13 dk14 dk15
makedev dk16 dk17 dk18 dk19 dk20 dk21 dk22 dk23
makedev dk24 dk25 dk26 dk27 dk28 dk29 dk30 dk31
makedev ccd0 ccd1 ccd2 ccd3
makedev cgd0 cgd1 cgd2 cgd3 cgd4 cgd5 cgd6 cgd7
makedev fss0 fss1 fss2 fss3
makedev md0 md1
makedev raid0 raid1 raid2 raid3 raid4 raid5 raid6 raid7
makedev vnd0 vnd1 vnd2 vnd3
makedev iscsi0
makedev bpf npf
makedev tun0 tun1 tun2 tun3
makedev ipl pf crypto random
makedev lockstat clockctl cpuctl
makedev atabus0 atabus1 atabus2 atabus3 atabus4 atabus5 atabus6 atabus7
makedev srt0 srt1 srt2 srt3
makedev tap tap0 tap1 tap2 tap3
makedev gpio gpio0 gpio1 gpio2 gpio3 gpio4 gpio5 gpio6 gpio7
makedev gpiopps0
makedev pad pad0 pad1 pad2 pad3
makedev bthub
makedev putter
makedev drvctl
makedev video
makedev dtv
makedev drm0 drm1 drm2 drm3
makedev altmem
makedev zfs
makedev lua
makedev hdmicec0
makedev dtrace
makedev veriexec
makedev autofs
makedev fw0 fw1 fw2 fw3
makedev ipmi0
makedev qemufwcfg
makedev sht3xtemp0
makedev scmd0
makedev local # do this last
;;
init)
# unless overridden by MD entry, this is equal to 'all'
makedev all opty
;;
%MI_DEVICES_BEGIN%
audio)
makedev audio0 audio1 audio2 audio3
makedev hdaudio0 hdaudio1 hdaudio2 hdaudio3
lndev sound0 sound
lndev audio0 audio
lndev mixer0 mixer
lndev audioctl0 audioctl
;;
gpio)
makedev gpio0 gpio1 gpio2 gpio3 gpio4 gpio5 gpio6 gpio7
lndev gpio0 gpio
;;
gpiopps)
makedev gpiopps0
lndev gpiopps0 gpiopps
;;
lua)
makedev lua0
lndev lua0 lua
;;
pad)
makedev pad0 pad1 pad2 pad3
lndev pad0 pad
;;
qemufwcfg)
makedev qemufwcfg0
lndev qemufwcfg0 qemufwcfg
;;
radio)
makedev radio0 radio1
lndev radio0 radio
;;
video)
makedev video0 video1 video2 video3
;;
dtv)
makedev dtv0 dtv1 dtv2 dtv3
;;
iic)
makedev iic0 iic1 iic2 iic3
;;
altmem)
makedev altmem0 altmem1
;;
ramdisk)
makedev floppy md0
;;
sht3xtemp)
makedev sht3xtemp0
;;
scmd)
makedev scmd0
;;
usbs)
makedev usb usb0 usb1 usb2 usb3 usb4 usb5 usb6 usb7
makedev usb8 usb9 usb10 usb11 usb12 usb13 usb14 usb15
makedev uhid0 uhid1 uhid2 uhid3 uhid4 uhid5
makedev uhid6 uhid7 uhid8 uhid9 uhid10 uhid11
makedev uhid12 uhid13 uhid14 uhid15
makedev ulpt0 ulpt1
makedev ttyU0 ttyU1 ttyU2 ttyU3 ttyU4 ttyU5 ttyU6 ttyU7
makedev ttyY0 ttyY1
makedev ttyHS0
makedev utoppy0 utoppy1
makedev ugen0 ugen1 ugen2 ugen3
;;
std)
mkdev console c %cons_chr% 0 600
mkdev constty c %cons_chr% 1 600
mkdev drum c %swap_chr% 0 640 $g_kmem
mkdev kmem c %mem_chr% 1 640 $g_kmem
mkdev mem c %mem_chr% 0 640 $g_kmem
mkdev null c %mem_chr% 2 666
mkdev full c %mem_chr% 11 666
mkdev zero c %mem_chr% 12 666
mkdev klog c %log_chr% 0 600
mkdev ksyms c %ksyms_chr% 0 440 $g_kmem
mkdev random c %rnd_chr% 0 444
mkdev urandom c %rnd_chr% 1 644
if ! $fdesc_mounted; then
mkdev tty c %ctty_chr% 0 666
mkdev stdin c %filedesc_chr% 0 666
mkdev stdout c %filedesc_chr% 1 666
mkdev stderr c %filedesc_chr% 2 666
fi
;;
usb)
mkdev usb c %usb_chr% 255 444
;;
usb[0-9]*)
unit=${i#usb}
usb=usb$unit
mkdev usb$unit c %usb_chr% $unit
;;
uhid[0-9]*)
unit=${i#uhid}
mkdev uhid$unit c %uhid_chr% $unit 666
;;
ulpt[0-9]*)
unit=${i#ulpt}
mkdev ulpt$unit c %ulpt_chr% $unit
mkdev ulpn$unit c %ulpt_chr% $(($unit + 64))
;;
utoppy[0-9]*)
unit=${i#utoppy}
mkdev utoppy$unit c %utoppy_chr% $unit
;;
ttyHS[0-9]*)
unit=${i#ttyHS}
for j in 00 01 02 03 04 05 06 07 08 09 10
do
base=$(($unit * 16 + ${j#0}))
mkdev ttyHS$unit.$j c %uhso_chr% $(($base + $dialin )) "" "" $u_uucp
mkdev dtyHS$unit.$j c %uhso_chr% $(($base + $dialout )) "" "" $u_uucp
mkdev ctyHS$unit.$j c %uhso_chr% $(($base + $callunit)) "" "" $u_uucp
done
;;
ttyY[0-9]*)
unit=${i#ttyY}
mkdev ttyY$unit c %ucycom_chr% $(($unit + $dialin )) "" "" $u_uucp
mkdev dtyY$unit c %ucycom_chr% $(($unit + $dialout )) "" "" $u_uucp
mkdev ctyY$unit c %ucycom_chr% $(($unit + $callunit)) "" "" $u_uucp
;;
ucom[0-9]*)
makedev ttyU${i#ucom}
;;
ttyU[0-9]*)
unit=${i#ttyU}
mkdev ttyU$unit c %ucom_chr% $(($unit + $dialin )) "" "" $u_uucp
mkdev dtyU$unit c %ucom_chr% $(($unit + $dialout )) "" "" $u_uucp
mkdev ctyU$unit c %ucom_chr% $(($unit + $callunit)) "" "" $u_uucp
;;
ugen[0-9]*)
unit=${i#ugen}
for j in 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
do
mkdev ugen$unit.$j c %ugen_chr% $(($unit * 16 + ${j#0}))
done
;;
wscons)
makedev ttyE0 ttyE1 ttyE2 ttyE3 ttyE4 ttyE5 ttyE6 ttyE7
makedev ttyF0 ttyF1 ttyF2 ttyF3 ttyF4 ttyF5 ttyF6 ttyF7
makedev ttyG0 ttyG1 ttyG2 ttyG3 ttyG4 ttyG5 ttyG6 ttyG7
makedev ttyH0 ttyH1 ttyH2 ttyH3 ttyH4 ttyH5 ttyH6 ttyH7
makedev wsmouse0 wsmouse1 wsmouse2 wsmouse3
makedev wskbd0 wskbd1 wskbd2 wskbd3
makedev wsmux0 wsmux1 wsmux2 wsmux3
makedev wsmouse wskbd
makedev ttyEcfg ttyEstat
makedev ttyFcfg ttyFstat
makedev ttyGcfg ttyGstat
makedev ttyHcfg ttyHstat
makedev wsfont
;;
wsmouse)
mkdev wsmouse c %wsmux_chr% 0
;;
wskbd)
mkdev wskbd c %wsmux_chr% 1
;;
wsmux[0-9]*)
unit=${i#wsmux}
mkdev wsmux$unit c %wsmux_chr% $unit
mkdev wsmuxctl$unit c %wsmux_chr% $(($unit + 128)) 200
;;
xenevt)
mkdev xenevt c %xenevt_chr% 0
;;
xsd_kva)
mkdev xsd_kva c %xenevt_chr% 1
;;
xencons)
mkdev xencons c %xencons_chr% 0
;;
ttyEstat)
mkdev ttyEstat c %wsdisplay_chr% 254
;;
ttyEcfg)
mkdev ttyEcfg c %wsdisplay_chr% 255
;;
ttyE[0-9]*)
unit=${i#ttyE}
mkdev ttyE$unit c %wsdisplay_chr% $unit
;;
ttyFstat)
mkdev ttyFstat c %wsdisplay_chr% 510
;;
ttyFcfg)
mkdev ttyFcfg c %wsdisplay_chr% 511
;;
ttyF[0-9]*)
unit=${i#ttyF}
mkdev ttyF$unit c %wsdisplay_chr% $(($unit + 256))
;;
ttyGstat)
mkdev ttyGstat c %wsdisplay_chr% 766
;;
ttyGcfg)
mkdev ttyGcfg c %wsdisplay_chr% 767
;;
ttyG[0-9]*)
unit=${i#ttyG}
mkdev ttyG$unit c %wsdisplay_chr% $(($unit + 512))
;;
ttyHstat)
mkdev ttyHstat c %wsdisplay_chr% 1022
;;
ttyHcfg)
mkdev ttyHcfg c %wsdisplay_chr% 1023
;;
ttyH[0-9]*)
unit=${i#ttyH}
mkdev ttyH$unit c %wsdisplay_chr% $(($unit + 768))
;;
wsmouse[0-9]*)
unit=${i#wsmouse}
mkdev wsmouse$unit c %wsmouse_chr% $unit
;;
wskbd[0-9]*)
unit=${i#wskbd}
mkdev wskbd$unit c %wskbd_chr% $unit
;;
fd)
if ! $fdesc_mounted; then
# Create the "fd" subdirectory, and devices "fd/0" to "fd/63"
makedir fd 755
n=0
while [ $n -lt 64 ]
do
mkdev fd/$n c %filedesc_chr% $n 666
n=$(($n + 1))
done
fi
;;
wt[0-9]*)
name=wt; unit=${i#wt}; chr=%wt_chr%; blk=%wt_blk%
for sub in $unit $(($unit+8)) $(($unit+16))
do
mkdev $name$sub b $blk $(($sub + 0)) 660 $g_operator
mkdev n$name$sub b $blk $(($sub + 4)) 660 $g_operator
mkdev r$name$sub c $chr $(($sub + 0)) 660 $g_operator
mkdev nr$name$sub c $chr $(($sub + 4)) 660 $g_operator
done
;;
md[0-9]*)
makedisk_minimal md ${i#md} %md_blk% %md_chr%
;;
fss[0-9]*)
name=fss; unit=${i#fss}; blk=%fss_blk%; chr=%fss_chr%
mkdev $name$unit b $blk $unit 660 $g_operator
mkdev r$name$unit c $chr $unit 660 $g_operator
;;
ss[0-9]*)
name=ss; unit=${i#ss}; chr=%ss_chr%
mkdev $name$unit c $chr $(($unit * 16 + 0)) 640 $g_operator
mkdev n$name$unit c $chr $(($unit * 16 + 1)) 640 $g_operator
mkdev en$name$unit c $chr $(($unit * 16 + 3)) 640 $g_operator
;;
ccd[0-9]*|cgd[0-9]*|raid[0-9]*|vnd[0-9]*)
case $i in
ccd*) name=ccd; unit=${i#ccd}; blk=%ccd_blk%; chr=%ccd_chr%;;
cgd*) name=cgd; unit=${i#cgd}; blk=%cgd_blk%; chr=%cgd_chr%;;
raid*) name=raid; unit=${i#raid}; blk=%raid_blk%; chr=%raid_chr%;;
vnd*) name=vnd; unit=${i#vnd}; blk=%vnd_blk%; chr=%vnd_chr%;;
esac
%MKDISK% $name $unit $blk $chr
;;
sd[0-9]*)
name=sd; unit=${i#sd}; blk=%sd_blk%; chr=%sd_chr%
%MKDISK% $name $unit $blk $chr
;;
ace[0-9]*)
name=ace; unit=${i#ace}; blk=%ace_blk%; chr=%ace_chr%
%MKDISK% $name $unit $blk $chr
;;
eflash[0-9]*)
name=eflash; unit=${i#eflash}; blk=%eflash_blk%; chr=%eflash_chr%
%MKDISK% $name $unit $blk $chr
;;
wd[0-9]*)
name=wd; unit=${i#wd}; blk=%wd_blk%; chr=%wd_chr%
%MKDISK% $name $unit $blk $chr
;;
fd[0-9]*)
name=fd; unit=${i#fd}; blk=%fd_blk%; chr=%fd_chr%
%MKDISK% $name $unit $blk $chr
;;
ld[0-9]*)
name=ld; unit=${i#ld}; blk=%ld_blk%; chr=%ld_chr%
%MKDISK% $name $unit $blk $chr
;;
flash[0-9]*)
unit=${i#flash}
flash=flash$unit
mkdev flash$unit b %flash_blk% $unit
mkdev rflash$unit c %flash_chr% $unit
;;
spiflash[0-9]*)
unit=${i#spiflash}
spiflash=spiflash$unit
mkdev spiflash$unit b %spiflash_blk% $unit
mkdev rspiflash$unit c %spiflash_chr% $unit
;;
altmem[0-9]*)
name=altmem; unit=${i#altmem}; blk=%altmem_blk%; chr=%altmem_chr%
%MKDISK% $name $unit $blk $chr
;;
bio)
mkdev bio c %bio_chr% 0
;;
ed[0-9]*)
name=ed; unit=${i#ed}; blk=%ed_blk%; chr=%ed_chr%
%MKDISK% $name $unit $blk $chr
;;
ofdisk[0-9]*)
name=ofdisk; unit=${i#ofdisk}; blk=%ofdisk_blk%; chr=%ofdisk_chr%
%MKDISK% $name $unit $blk $chr
;;
xbd[0-9]*)
name=xbd; unit=${i#xbd}; blk=%xbd_blk%; chr=%xbd_chr%
%MKDISK% $name $unit $blk $chr
;;
dk[0-9]*)
name=dk; unit=${i#dk}; blk=%dk_blk%; chr=%dk_chr%
mkdev r$name$unit c $chr $unit 0640 $g_operator
mkdev $name$unit b $blk $unit 0640 $g_operator
;;
tprof)
mkdev tprof c %tprof_chr% 0
;;
ttyCY[0-9]*)
# Each unit number creates 32 pairs of {tty,dty} device nodes:
# ttyCY0 => device nodes [td]tyCY000 to [td]tyCY031;
# ttyCY1 => device nodes [td]tyCY032 to [td]tyCY063;
name=tyCY; chr=%cy_chr%; off=32
unit=${i#t${name}}
minor=$(($unit * $off))
eminor=$(($minor + $off))
while [ $minor -lt $eminor ]
do
nminor=000$minor
nminor=${nminor#${nminor%???}}
mkdev t$name$nminor c $chr $(($minor + $dialin )) "" "" $u_uucp
mkdev d$name$nminor c $chr $(($minor + $dialout)) "" "" $u_uucp
minor=$(($minor + 1))
done
;;
ttyCZ[0-9]*)
# Each unit number creates 64 pairs of {tty,dty} device nodes:
# ttyCZ0 => device nodes [td]tyCZ0000 to [td]tyCZ0063;
# ttyCZ1 => device nodes [td]tyCZ0064 to [td]tyCZ0127;
name=tyCZ; chr=%cz_chr%; off=64
unit=${i#t${name}}
minor=$(($unit * $off))
eminor=$(($minor + $off))
while [ $minor -lt $eminor ]
do
nminor=0000$minor
nminor=${nminor#${nminor%????}}
mkdev t$name$nminor c $chr $(($minor + $dialin )) "" "" $u_uucp
mkdev d$name$nminor c $chr $(($minor + $dialout)) "" "" $u_uucp
minor=$(($minor + 1))
done
;;
tty[0-9]|tty0[0-9])
# some archs have built-in zstty (major %zstty_chr%) instead
# of NS16550; create ttyZ* and hardlink as [dt]ty0*; this
# needs to be before com entry, for archs which have both
unit=${i#tty}
unit=$(($unit + 0))
makedev ttyZ${unit}
lndev ttyZ$unit tty0${unit}
lndev dtyZ$unit dty0${unit}
;;
tty[0-9]*)
unit=${i#tty}
ounit=00$unit
ounit=${ounit#${ounit%??}}
mkdev tty$ounit c %com_chr% $(($unit + $dialin )) "" "" $u_uucp
mkdev dty$ounit c %com_chr% $(($unit + $dialout)) "" "" $u_uucp
;;
ttyC[0-9]*)
# some archs call com_chr ttyC traditionally
unit=${i#ttyC}; name=ttyC; dname=dtyC; chr=%com_chr%
mkdev $name$unit c $chr $(($unit + $dialin )) "" "" $u_uucp
mkdev $dname$unit c $chr $(($unit + $dialout)) "" "" $u_uucp
;;
ttyh[0-9]*)
unit=${i#ttyh}; name=ttyh; dname=dtyh; chr=%sabtty_chr%
mkdev $name$unit c $chr $(($unit + $dialin )) "" "" $u_uucp
mkdev $dname$unit c $chr $(($unit + $dialout)) "" "" $u_uucp
;;
ttyTX[0-9]*)
unit=${i#ttyTX}; name=ttyTX0; dname=dtyTX0; chr=%txcom_chr%
mkdev $name$unit c $chr $(($unit + $dialin )) "" "" $u_uucp
mkdev $dname$unit c $chr $(($unit + $dialout)) "" "" $u_uucp
;;
ttyZ[0-9]*)
unit=${i#ttyZ}; name=ttyZ; dname=dtyZ; chr=%zstty_chr%
mkdev $name$unit c $chr $(($unit + $dialin )) "" "" $u_uucp
mkdev $dname$unit c $chr $(($unit + $dialout)) "" "" $u_uucp
;;
opty)
# Create 16 device nodes, [pt]typ0 to [pt]typf,
# same as "MAKEDEV pty0".
for j in 0 1 2 3 4 5 6 7 8 9 a b c d e f
do
case $j in
[0-9]) jn=$j ;;
a) jn=10 ;;
b) jn=11 ;;
c) jn=12 ;;
d) jn=13 ;;
e) jn=14 ;;
f) jn=15 ;;
esac
mkdev ttyp$j c %pts_chr% $jn 666
mkdev ptyp$j c %ptc_chr% $jn 666
done
;;
pty[0-9]*)
# Each unit number creates up to 16 pairs of {tty,pty} device nodes:
# pty0 => 16 pairs, [tp]typ0 to [tp]typf
# pty1 => 16 pairs, [tp]tyq0 to [tp]tyqf
# pty16 => 16 pairs, [tp]typg to [tp]typv
# pty17 => 16 pairs, [tp]typw to [tp]typL
# pty18 => 14 pairs, [tp]typM to [tp]typZ
warn "$i: creating BSD style tty nodes with ptyfs is a security issue"
class=${i#pty}
d1="p q r s t u v w x y z P Q R S T"
if [ "$class" -ge 64 ]
then
warn "$i: pty unit must be between 0 and 63"
continue
elif [ "$class" -lt 16 ]
then
# pty[p-zP-T][0-9a-f]
offset=0
mult=0
d2="0 1 2 3 4 5 6 7 8 9 a b c d e f"
else
# pty[p-zP-T][g-zA-Z]
class=$(($class - 16))
offset=256
mult=2
d2="g h i j k l m n o p q r s t u v w x y z A B C D E F G H I J K L M N O P Q R S T U V W X Y Z"
fi
start=$(($class * 16))
set -- $d2
nt=$#
s1=$(($start / $nt))
set -- $d1
shift $s1
t1=$1
if [ "$t1" = v ]; then
warn "$i: pty unit conflicts with console ttyv0 device"
continue
fi
s2=$(($start % ($nt - $s1 * $mult)))
set -- $d2
shift $s2
t2=$1
unit=$(($start + $offset - $s1 * $mult))
end=$(($unit + 16))
while [ "$unit" -lt "$end" ]
do
mkdev tty$t1$t2 c %pts_chr% $unit 666
mkdev pty$t1$t2 c %ptc_chr% $unit 666
shift
t2=$1
if [ -z "$t2" ]
then
break
fi
unit=$(($unit + 1))
done
;;
stic[0-9]*)
unit=${i#stic}
mkdev stic$unit c %stic_chr% $unit
;;
st[0-9]*)
name=st; unit=${i#st}; chr=%st_chr%; blk=%st_blk%
mkdev $name$unit b $blk $(($unit * 16 + 0)) 660 $g_operator
mkdev n$name$unit b $blk $(($unit * 16 + 1)) 660 $g_operator
mkdev e$name$unit b $blk $(($unit * 16 + 2)) 660 $g_operator
mkdev en$name$unit b $blk $(($unit * 16 + 3)) 660 $g_operator
mkdev r$name$unit c $chr $(($unit * 16 + 0)) 660 $g_operator
mkdev nr$name$unit c $chr $(($unit * 16 + 1)) 660 $g_operator
mkdev er$name$unit c $chr $(($unit * 16 + 2)) 660 $g_operator
mkdev enr$name$unit c $chr $(($unit * 16 + 3)) 660 $g_operator
;;
ses[0-9]*|ch[0-9]*|uk[0-9]*)
case $i in
ch*) name=ch; unit=${i#ch}; chr=%ch_chr%;;
uk*) name=uk; unit=${i#uk}; chr=%uk_chr%;;
ses*) name=ses; unit=${i#ses}; chr=%ses_chr%;;
esac
mkdev $name$unit c $chr $unit 640 $g_operator
;;
cd[0-9]*)
makedisk_minimal cd ${i#cd} %cd_blk% %cd_chr%
;;
mcd[0-9]*)
makedisk_minimal mcd ${i#mcd} %mcd_blk% %mcd_chr%
;;
gdrom[0-9]*)
makedisk_minimal gdrom ${i#gdrom} %gdrom_blk% %gdrom_chr%
;;
lpt[0-9]*|lpa[0-9]*)
case $i in
lpt*) name=lpt; unit=${i#lpt}; chr=%lpt_chr%; flags=0;;
lpa*) name=lpa; unit=${i#lpa}; chr=%lpt_chr%; flags=128;;
esac
mkdev $name$unit c $chr $(($unit + $flags))
mkdev lpt${unit}ctl c $chr $(($unit + 256))
;;
bpf)
mkdev bpf c %bpf_chr% 0
lndev bpf bpf0
;;
npf)
mkdev npf c %npf_chr% 0
;;
bthub)
mkdev bthub c %bthub_chr% 0
;;
tun[0-9]*)
unit=${i#tun}
mkdev tun$unit c %tun_chr% $unit
;;
joy[0-9]*)
unit=${i#joy}
mkdev joy$unit c %joy_chr% $unit
;;
ipl)
mkdev ipl c %ipl_chr% 0
mkdev ipnat c %ipl_chr% 1
mkdev ipstate c %ipl_chr% 2
mkdev ipauth c %ipl_chr% 3
mkdev ipsync c %ipl_chr% 4
mkdev ipscan c %ipl_chr% 5
mkdev iplookup c %ipl_chr% 6
;;
pf)
mkdev pf c %pf_chr% 0
;;
crypto)
mkdev crypto c %crypto_chr% 0 666
;;
cmos)
mkdev cmos c %cmos_chr% 0 644
;;
speaker)
mkdev speaker c %spkr_chr% 0
;;
lockstat)
mkdev lockstat c %lockstat_chr% 0
;;
cpuctl)
mkdev cpuctl c %cpuctl_chr% 0 666
;;
audio|audio[0-9]*)
unit=${i#audio}
audio=audio$unit
sound=sound$unit
mixer=mixer$unit
audioctl=audioctl$unit
: ${unit:-0}
mkdev $sound c %audio_chr% $(($unit + 0)) 666
mkdev $audio c %audio_chr% $(($unit + 128)) 666
mkdev $mixer c %audio_chr% $(($unit + 16)) 666
mkdev $audioctl c %audio_chr% $(($unit + 192)) 666
;;
hdaudio[0-9]*)
unit=${i#hdaudio}
mkdev hdaudio$unit c %hdaudio_chr% $unit 644
;;
hdmicec[0-9]*)
uint=${i#hdmicec}
mkdev hdmicec$unit c %hdmicec_chr% $unit 644
;;
gpio[0-9]*)
unit=${i#gpio}
mkdev gpio$unit c %gpio_chr% $unit 664 $g_gpio
;;
gpiopps[0-9]*)
unit=${i#gpiopps}
mkdev gpiopps$unit c %gpiopps_chr% $unit 664 $g_gpio
;;
lua[0-9]*)
unit=${i#lua}
mkdev lua$unit c %lua_chr% $unit 664
;;
rmidi[0-9]*)
unit=${i#rmidi}
mkdev rmidi$unit c %midi_chr% $unit 666
;;
music|music[0-9]*)
unit=${i#music}
: ${unit:-0}
mkdev music$unit c %sequencer_chr% $(($unit + 0)) 666
mkdev sequencer$unit c %sequencer_chr% $(($unit + 128)) 666
;;
radio|radio[0-9]*)
unit=${i#radio}
: ${unit:-0}
mkdev radio$unit c %radio_chr% $unit 666
;;
video|video[0-9]*)
unit=${i#video}
: ${unit:-0}
mkdev video$unit c %video_chr% $unit 666
;;
dtv[0-9]*)
unit=${i#dtv}
makedir dvb 755
makedir dvb/adapter$unit 755
mkdev dvb/adapter$unit/frontend0 c %dtv_chr% $(($unit + 0)) 666
mkdev dvb/adapter$unit/demux0 c %dtv_chr% $(($unit + 16)) 666
mkdev dvb/adapter$unit/dvr0 c %dtv_chr% $(($unit + 32)) 666
;;
iic[0-9]*)
unit=${i#iic}
: ${unit:-0}
mkdev iic$unit c %iic_chr% $unit 600
;;
spi[0-9]*)
unit=${i#spi}
: ${unit:-0}
mkdev spi$unit c %spi_chr% $unit 600
;;
amr[0-9]*)
unit=${i#amr}
mkdev amr$unit c %amr_chr% $unit
;;
apm)
mkdev apm c %apm_chr% 0 644
mkdev apmctl c %apm_chr% 8 644
;;
apm)
# hpcmips uses `apmdev_chr' instead of `apm_chr'
mkdev apm c %apmdev_chr% 0 644
mkdev apmctl c %apmdev_chr% 8 644
;;
random)
mkdev random c %rnd_chr% 0 444
mkdev urandom c %rnd_chr% 1 644
;;
cfs)
makedev cfs0
;;
cfs[0-9]*)
unit=${i#cfs}
mkdev cfs$unit c %vcoda_chr% $unit
;;
sysmon)
mkdev sysmon c %sysmon_chr% 0 644
mkdev watchdog c %sysmon_chr% 1 644
mkdev power c %sysmon_chr% 2 640
;;
scsibus[0-9]*)
unit=${i#scsibus}
mkdev scsibus$unit c %scsibus_chr% $unit 644
;;
bktr)
makedev bktr0 bktr1
lndev bktr0 bktr
lndev tuner0 tuner
lndev vbi0 vbi
;;
bktr[0-9]*)
unit=${i#bktr}
mkdev bktr$unit c %bktr_chr% $(($unit + 0)) 444
mkdev tuner$unit c %bktr_chr% $(($unit + 16)) 444
mkdev vbi$unit c %bktr_chr% $(($unit + 32)) 444
;;
io)
mkdev io c %mem_chr% 14 600
;;
iop[0-9]*)
unit=${i#iop}
mkdev iop$unit c %iop_chr% $unit
;;
mfi[0-9]*)
unit=${i#mfi}
mkdev mfi$unit c %mfi_chr% $unit
;;
mlx[0-9]*)
unit=${i#mlx}
mkdev mlx$unit c %mlx_chr% $unit
;;
mly[0-9]*)
unit=${i#mly}
mkdev mly$unit c %mly_chr% $unit
;;
twa[0-9]*)
unit=${i#twa}
mkdev twa$unit c %twa_chr% $unit
;;
twe[0-9]*)
unit=${i#twe}
mkdev twe$unit c %twe_chr% $unit
;;
icp[0-9]*)
unit=${i#icp}
mkdev icp$unit c %icp_chr% $unit
;;
agp[0-9]*)
unit=${i#agp}
mkdev agp$unit c %agp_chr% $unit 644
if [ "$unit" = "0" ]; then
lndev agp$unit agpgart
fi
;;
pci[0-9]*)
unit=${i#pci}
mkdev pci$unit c %pci_chr% $unit 640
;;
dpti[0-9]*)
unit=${i#dpti}
mkdev dpti$unit c %dpti_chr% $unit
;;
dpt[0-9]*)
unit=${i#dpt}
mkdev dpt$unit c %dpt_chr% $unit
;;
altq)
makedir altq 755
unit=0
for dev in altq cbq wfq afm fifoq red rio localq hfsc cdnr blue priq jobs
do
mkdev altq/$dev c %altq_chr% $unit 644
unit=$(($unit + 1))
done
;;
wsfont)
mkdev wsfont c %wsfont_chr% 0 644
;;
cir[0-9]*)
unit=${i#cir}
mkdev cir$unit c %cir_chr% $unit 666
;;
irframe[0-9]*)
unit=${i#irframe}
mkdev irframe$unit c %irframe_chr% $unit
;;
fcom[0-9]*)
unit=${i#fcom}
mkdev fcom$unit c %fcom_chr% $unit "" "" $u_uucp
;;
openfirm)
mkdev openfirm c %openfirm_chr% 0 444
;;
pad[0-9]*)
unit=${i#pad}
mkdev pad$unit c %pad_chr% $unit 444
;;
qemufwcfg[0-9]*)
unit=${i#qemufwcfg}
mkdev qemufwcfg$unit c %qemufwcfg_chr% $unit 660
;;
vio9p[0-9]*)
unit=${i#vio9p}
mkdev vio9p$unit c %vio9p_chr% $unit 660
;;
fault)
mkdev fault c %fault_chr% 0
;;
nvram)
mkdev nvram c %nvram_chr% 0 644
;;
rtc)
mkdev rtc c %rtc_chr% 0 644
;;
clockctl)
mkdev clockctl c %clockctl_chr% 0 660 $g_ntpd
;;
kttcp)
mkdev kttcp c %kttcp_chr% 0
;;
dmoverio)
mkdev dmoverio c %dmoverio_chr% 0 644
;;
veriexec)
mkdev veriexec c %veriexec_chr% 0 600
;;
vhci[0-7]*)
unit=${i#vhci}
mkdev vhci$unit c %vhci_chr% $unit
;;
ttyv[0-9]*)
unit=${i#ttyv}
mkdev ttyv$unit c %pc_chr% $unit
;;
# arm, acorn32
ttyv[0-9]*)
unit=${i#ttyv}
mkdev ttyv$unit c %physcon_chr% $unit
;;
arcpp[0-9]*)
unit=${i#arcpp}
mkdev arcpp$unit c %arcpp_chr% $unit
;;
par[0-9]*)
unit=${i#par}
case $unit in
0)
mkdev par$unit c %par_chr% $unit
;;
*)
warn "bad unit for par in: $i"
;;
esac
;;
cpi[0-9]*)
unit=${i#cpi}
mkdev cpi$unit c %cpi_chr% $unit
;;
ite[0-9]*|ttye[0-9]*)
case $i in
ite*) unit=${i#ite};;
ttye*) unit=${i#ttye};;
esac
mkdev ttye$unit c %ite_chr% $unit
;;
pms[0-9]*)
unit=${i#pms}
mkdev pms$unit c %opms_chr% $unit
;;
qms[0-9]*)
unit=${i#qms}
mkdev qms$unit c %qms_chr% $unit
;;
lms[0-9]*)
unit=${i#lms}
mkdev lms$unit c %lms_chr% $unit
;;
mms[0-9]*)
unit=${i#mms}
mkdev mms$unit c %mms_chr% $unit
;;
mouse-pms[0-9]*|mouse-qms[0-9]*)
case $i in
mouse-pms*) name=pms ;;
mouse-qms*) name=qms ;;
esac
unit=${i#mouse-${name}}
lndev $name$unit mouse
;;
kbd)
mkdev kbd c %kbd_chr% 0
;;
kbdctl)
mkdev kbdctl c %kbd_chr% 1
;;
vidcconsole0)
mkdev vidcconsole0 c %vidcconsole_chr% 0 640
;;
view[0-9]*)
unit=${i#view}
mkdev view$unit c %view_chr% $unit 666
;;
mouse[0-9]*)
unit=${i#mouse}
case $unit in
0|1)
mkdev mouse$unit c %ms_chr% $unit 666
if [ $unit = 0 ]; then
lndev mouse$unit mouse
fi
;;
*)
warn "bad unit for mouse in: $i"
;;
esac
;;
panel)
mkdev panel0 c %panel_chr% 0 660
;;
tslcd)
mkdev tslcd0 c %tslcd_chr% 0 660
;;
ipty)
mkdev ttyp0 c %pts_chr% 0 666
mkdev ttyp1 c %pts_chr% 1 666
mkdev ptyp0 c %ptc_chr% 0 666
mkdev ptyp1 c %ptc_chr% 1 666
;;
ptm)
makedir pts 755
mkdev ptmx c %ptm_chr% 0 666
mkdev ptm c %ptm_chr% 1 666
;;
grf[0-9]*)
unit=${i#grf}
mkdev grf$unit c %grf_chr% $unit 666
;;
etvme)
mkdev etvme c %et_chr% 0
;;
leo[0-9]*)
unit=${i#leo}
mkdev leo$unit c %leo_chr% $unit
;;
scif[0-9]*)
unit=${i#scif}
mkdev scif$unit c %scif_chr% $(($unit + $dialin )) "" "" $u_uucp
mkdev dscif$unit c %scif_chr% $(($unit + $dialout)) "" "" $u_uucp
;;
sci[0-9]*)
unit=${i#sci}
mkdev sci$unit c %sci_chr% $(($unit + $dialin )) "" "" $u_uucp
mkdev dsci$unit c %sci_chr% $(($unit + $dialout)) "" "" $u_uucp
;;
maple[ABCD]|maple[ABCD][0-9]*)
case $i in
mapleA*) name="mapleA"; unit=0;;
mapleB*) name="mapleB"; unit=1;;
mapleC*) name="mapleC"; unit=2;;
mapleD*) name="mapleD"; unit=3;;
esac
subunit=${i#$name}
mkdev $name$subunit c %maple_chr% $(($unit * 8 + 0$subunit))
;;
mmem[0-9]*)
unit=${i#mmem}
for pt in 0 # 1 2 3 4 ... 255
do
# mkdev mmem${unit}.${pt}a b %mmem_blk% $(($unit * 4096 + $pt * 16 + 0)) 640 $g_operator
mkdev mmem${unit}.${pt}c b %mmem_blk% $(($unit * 4096 + $pt * 16 + 2)) 640 $g_operator
# mkdev rmmem${unit}.${pt}a c %mmem_chr% $(($unit * 4096 + $pt * 16 + 0)) 640 $g_operator
mkdev rmmem${unit}.${pt}c c %mmem_chr% $(($unit * 4096 + $pt * 16 + 2)) 640 $g_operator
done
;;
mlcd[0-9]*)
unit=${i#mlcd}
for pt in 0 # 1 2 3 4 ... 255
do
mkdev mlcd${unit}.${pt} c %mlcd_chr% $(($unit * 256 + $pt)) 640 $g_operator
done
;;
ixpcom[0-9]*)
unit=${i#ixpcom}
mkdev ixpcom$unit c %ixpcom_chr% $unit "" "" $u_uucp
;;
epcom[0-9]*)
unit=${i#epcom}
mkdev epcom$unit c %epcom_chr% $unit "" "" $u_uucp
;;
plcom[0-9]*)
unit=${i#plcom}
mkdev plcom$unit c %plcom_chr% $unit "" "" $u_uucp
mkdev dplcom$unit c %plcom_chr% $(($unit + $dialout)) "" "" $u_uucp
;;
wmcom[0-9]*)
unit=${i#wmcom}
mkdev wmcom$unit c %wmcom_chr% $unit "" "" $u_uucp
;;
ucbsnd)
mkdev ucbsnd c %ucbsnd_chr% 0 666
;;
adb)
mkdev adb c %aed_chr% 0 666
;;
asc[0-9]*)
unit=${i#asc}
mkdev asc$unit c %asc_chr% $unit 666
;;
bwtwo[0-9]*)
unit=${i#bwtwo}
mkdev bwtwo$unit c %bwtwo_chr% $unit 666
;;
cgtwo[0-9]*)
unit=${i#cgtwo}
mkdev cgtwo$unit c %cgtwo_chr% $unit 666
;;
cgthree[0-9]*)
unit=${i#cgthree}
mkdev cgthree$unit c %cgthree_chr% $unit 666
;;
cgfour[0-9]*)
unit=${i#cgfour}
mkdev cgfour$unit c %cgfour_chr% $unit 666
;;
cgsix[0-9]*)
unit=${i#cgsix}
mkdev cgsix$unit c %cgsix_chr% $unit 666
;;
cgeight[0-9]*)
unit=${i#cgeight}
mkdev cgeight$unit c %cgeight_chr% $unit 666
;;
tcx[0-9]*)
unit=${i#tcx}
mkdev tcx$unit c %tcx_chr% $unit 666
;;
xd[0-9]*|xy[0-9]*)
case $i in
xd*) name=xd; unit=${i#xd}; blk=%xd_blk%; chr=%xd_chr%;;
xy*) name=xy; unit=${i#xy}; blk=%xy_blk%; chr=%xy_chr%;;
esac
%MKDISK% $name $unit $blk $chr
;;
magma[0-9]*)
unit=${i#magma}
if [ 0$unit -gt 3 ]; then
warn "bad unit for $i: $unit"
break
fi
for j in 0 1 2 3 4 5 6 7 8 9 a b c d e f
do
case $j in
[0-9]) jn=$j ;;
a) jn=10 ;;
b) jn=11 ;;
c) jn=12 ;;
d) jn=13 ;;
e) jn=14 ;;
f) jn=15 ;;
esac
mkdev tty$unit$j c %mtty_chr% $(($unit * 64 + $jn))
done
mkdev bpp${unit}0 c %mbpp_chr% $(($unit * 64 + 0))
mkdev bpp${unit}1 c %mbpp_chr% $(($unit * 64 + 1))
;;
clcd[0-9]*)
unit=${i#clcd}
if [ 0$unit -gt 7 ]; then
warn "bad unit for $i: $unit"
break
fi
for j in 0 1 2 3 4 5 6 7
do
mkdev ttyA$unit$j c %clcd_chr% $(($unit * 8 + $j + $dialin)) "" "" $u_uucp
mkdev dtyA$unit$j c %clcd_chr% $(($unit * 8 + $j + $dialout)) "" "" $u_uucp
done
;;
spif[0-9]*)
unit=${i#spif}
if [ 0$unit -gt 3 ]; then
warn "bad unit for $i: $unit"
break
fi
for j in 0 1 2 3 4 5 6 7; do
mkdev ttyS$unit$j c %stty_chr% $(($unit * 64 + $j)) "" "" $u_uucp
done
mkdev bppS${unit}0 c %sbpp_chr% $(($unit * 64 + 0))
mkdev bppS${unit}1 c %sbpp_chr% $(($unit * 64 + 1))
;;
bpp|bpp[0-9]*)
unit=${i#bpp}
mkdev bpp$unit c %bpp_chr% $(($unit + 0))
;;
tctrl[0-9]*)
unit=${i#tctrl}
mkdev tctrl$unit c %tctrl_chr% $unit 666
;;
bmd[0-9]*)
unit=${i#bmd}
mkdev bmd${unit}a b %bmd_blk% $(($unit * 8 + 0)) 640 $g_operator
mkdev bmd${unit}c b %bmd_blk% $(($unit * 8 + 2)) 640 $g_operator
mkdev rbmd${unit}a c %bmd_chr% $(($unit * 8 + 0)) 640 $g_operator
mkdev rbmd${unit}c c %bmd_chr% $(($unit * 8 + 2)) 640 $g_operator
;;
sram)
mkdev sram c %sram_chr% 0 644
;;
ttyS[0-9]*)
unit=${i#ttyS}
mkdev ttyS$unit c %sacom_chr% $(($unit + $dialin )) "" "" $u_uucp
mkdev dtyS$unit c %sacom_chr% $(($unit + $dialout)) "" "" $u_uucp
;;
atabus[0-9]*)
unit=${i#atabus}
mkdev atabus$unit c %atabus_chr% $unit 644
;;
drm[0-9]*)
unit=${i#drm}
unit2=$((unit + 128))
makedir dri 755
mkdev dri/card$unit c %drm_chr% $unit 660
mkdev dri/renderD${unit2} c %drm_chr% ${unit2} 660
;;
drvctl)
mkdev drvctl c %drvctl_chr% 0 644
;;
isv)
mkdev isv c %isv_chr% 0 644
;;
tap|tap[0-9]*)
unit=${i#tap}
case "$unit" in
[0-9]*)
mkdev tap${unit} c %tap_chr% ${unit} 600
;;
"")
mkdev tap c %tap_chr% 0xfffff 600
;;
esac
;;
srt[0-9]*)
unit=${i#srt}
mkdev srt$unit c %srt_chr% $unit 600
;;
tpm)
mkdev tpm c %tpm_chr% 0 600
;;
dtrace)
makedir dtrace 755
mkdev dtrace/dtrace c %dtrace_chr% 0 600
;;
fw[0-9]*)
unit=${i#fw}
for j in 0 1 2 3
do
mkdev fw${unit}.${j} c %fw_chr% $((${unit} * 256 + ${j})) 660 ${g_operator}
mkdev fwmem${unit}.${j} c %fw_chr% $((65536 + ${unit} * 256 + ${j})) 660 ${g_operator}
done
;;
# create putter device and symlinks for all subsystems using it
putter)
mkdev putter c %putter_chr% 0 600
mkdev pud c %putter_chr% 1 600
lndev putter puffs
;;
zfs)
mkdev zfs c %zfs_chr% 0 600
makedir zpool 755
;;
iscsi[0-9]*)
unit=${i#iscsi}
mkdev iscsi${unit} c %iscsi_chr% $unit 600
;;
vchiq)
mkdev vchiq c %vchiq_chr% 0 600
;;
nvme[0-9]*ns[0-9]*)
unit=${i#nvme}
unit=${unit%ns*}
subunit=${i#nvme${unit}ns}
if [ 0$subunit -le 0 ] || [ 0$subunit -ge 65536 ]; then
warn "bad nsid for $i: $subunit"
break
fi
mkdev nvme${unit}ns$subunit c %nvme_chr% $(($unit * 65536 + $subunit))
;;
nvme[0-9]*)
unit=${i#nvme}
mkdev nvme$unit c %nvme_chr% $(($unit * 65536))
;;
nvmm)
mkdev nvmm c %nvmm_chr% 0 660 $g_nvmm
;;
autofs)
mkdev autofs c %autofs_chr% 0 600
;;
kcov)
mkdev kcov c %kcov_chr% 0
;;
ipmi[0-9]*)
unit=${i#ipmi}
mkdev ipmi${unit} c %ipmi_chr% $unit 600
;;
xmm[0-9])
unit=${i#xmm}
makedir xmm${unit} 755
mkdev xmm${unit}/rpc c %wwanc_chr% $(($unit * 65536 + 1))
mkdev ttyXMM${unit}0 c %wwanc_chr% $(($unit * 65536 + 2))
mkdev ttyXMM${unit}1 c %wwanc_chr% $(($unit * 65536 + 4))
;;
acpi)
mkdev acpi c %acpi_chr% 0
;;
smbios)
mkdev smbios c %smbios_chr% 0
;;
efi)
mkdev efi c %efi_chr% 0 660
;;
sht3xtemp[0-9]*)
unit=${i#sht3xtemp}
mkdev sht3xtemp$unit c %sht3xtemp_chr% $unit 664
;;
scmd[0-9]*)
unit=${i#scmd}
mkdev scmd$unit c %scmd_chr% $unit 666
;;
ttyVI[0-9][0-9])
port=${i#ttyVI?}
devunit=${i%$port}
unit=${devunit#ttyVI}
mkdev ttyVI$unit$port c %viocon_chr% $((16*$unit + $port))
;;
ttyVI)
makedev ttyVI00 ttyVI10 ttyVI20 ttyVI30
;;
midevend)
%MI_DEVICES_END%
local)
if [ -f "$0.local" ]; then
umask 0
if [ -n "$count_nodes" ]; then
count_nodes=$((count_nodes + \
$(linecount "$("$HOST_SH" "$0.local" $opts -s all)") ))
else
"$HOST_SH" "$0.local" $opts all
fi
umask 077
fi
;;
*)
warn "$i: unknown device"
;;
esac
done
}
# three variants of disk partitions - max 8, max 16, max 16 with highpartoffset
# hack; only the one used by port is retained in final MAKEDEV script
# routine is called as:
# makedisk name unit blk chr
makedisk_p8()
{
name="$1"; unit="$2"; blk="$3"; chr="$4"
ro=%RAWDISK_OFF%
mkdev ${name}${unit} b $blk $(($unit * 8 + $ro)) 640 $g_operator
mkdev r${name}${unit} c $chr $(($unit * 8 + $ro)) 640 $g_operator
mkdev ${name}${unit}a b $blk $(($unit * 8 + 0)) 640 $g_operator
mkdev ${name}${unit}b b $blk $(($unit * 8 + 1)) 640 $g_operator
mkdev ${name}${unit}c b $blk $(($unit * 8 + 2)) 640 $g_operator
mkdev ${name}${unit}d b $blk $(($unit * 8 + 3)) 640 $g_operator
mkdev ${name}${unit}e b $blk $(($unit * 8 + 4)) 640 $g_operator
mkdev ${name}${unit}f b $blk $(($unit * 8 + 5)) 640 $g_operator
mkdev ${name}${unit}g b $blk $(($unit * 8 + 6)) 640 $g_operator
mkdev ${name}${unit}h b $blk $(($unit * 8 + 7)) 640 $g_operator
mkdev r${name}${unit}a c $chr $(($unit * 8 + 0)) 640 $g_operator
mkdev r${name}${unit}b c $chr $(($unit * 8 + 1)) 640 $g_operator
mkdev r${name}${unit}c c $chr $(($unit * 8 + 2)) 640 $g_operator
mkdev r${name}${unit}d c $chr $(($unit * 8 + 3)) 640 $g_operator
mkdev r${name}${unit}e c $chr $(($unit * 8 + 4)) 640 $g_operator
mkdev r${name}${unit}f c $chr $(($unit * 8 + 5)) 640 $g_operator
mkdev r${name}${unit}g c $chr $(($unit * 8 + 6)) 640 $g_operator
mkdev r${name}${unit}h c $chr $(($unit * 8 + 7)) 640 $g_operator
}
makedisk_p12high()
{
ho=524280 # offset for partition 9 to 11 (same as ...p16high)
name="$1"; unit="$2"; blk="$3"; chr="$4"
ro=%RAWDISK_OFF%
mkdev ${name}${unit} b $blk $(($unit * 8 + $ro)) 640 $g_operator
mkdev r${name}${unit} c $chr $(($unit * 8 + $ro)) 640 $g_operator
mkdev ${name}${unit}a b $blk $(($unit * 8 + 0)) 640 $g_operator
mkdev ${name}${unit}b b $blk $(($unit * 8 + 1)) 640 $g_operator
mkdev ${name}${unit}c b $blk $(($unit * 8 + 2)) 640 $g_operator
mkdev ${name}${unit}d b $blk $(($unit * 8 + 3)) 640 $g_operator
mkdev ${name}${unit}e b $blk $(($unit * 8 + 4)) 640 $g_operator
mkdev ${name}${unit}f b $blk $(($unit * 8 + 5)) 640 $g_operator
mkdev ${name}${unit}g b $blk $(($unit * 8 + 6)) 640 $g_operator
mkdev ${name}${unit}h b $blk $(($unit * 8 + 7)) 640 $g_operator
mkdev ${name}${unit}i b $blk $(($unit * 8 + $ho + 8)) 640 $g_operator
mkdev ${name}${unit}j b $blk $(($unit * 8 + $ho + 9)) 640 $g_operator
mkdev ${name}${unit}k b $blk $(($unit * 8 + $ho + 10)) 640 $g_operator
mkdev ${name}${unit}l b $blk $(($unit * 8 + $ho + 11)) 640 $g_operator
mkdev r${name}${unit}a c $chr $(($unit * 8 + 0)) 640 $g_operator
mkdev r${name}${unit}b c $chr $(($unit * 8 + 1)) 640 $g_operator
mkdev r${name}${unit}c c $chr $(($unit * 8 + 2)) 640 $g_operator
mkdev r${name}${unit}d c $chr $(($unit * 8 + 3)) 640 $g_operator
mkdev r${name}${unit}e c $chr $(($unit * 8 + 4)) 640 $g_operator
mkdev r${name}${unit}f c $chr $(($unit * 8 + 5)) 640 $g_operator
mkdev r${name}${unit}g c $chr $(($unit * 8 + 6)) 640 $g_operator
mkdev r${name}${unit}h c $chr $(($unit * 8 + 7)) 640 $g_operator
mkdev r${name}${unit}i c $chr $(($unit * 8 + $ho + 8)) 640 $g_operator
mkdev r${name}${unit}j c $chr $(($unit * 8 + $ho + 9)) 640 $g_operator
mkdev r${name}${unit}k c $chr $(($unit * 8 + $ho + 10)) 640 $g_operator
mkdev r${name}${unit}l c $chr $(($unit * 8 + $ho + 11)) 640 $g_operator
}
makedisk_p16()
{
name="$1"; unit="$2"; blk="$3"; chr="$4"
ro=%RAWDISK_OFF%
mkdev ${name}${unit} b $blk $(($unit * 16 + $ro)) 640 $g_operator
mkdev r${name}${unit} c $chr $(($unit * 16 + $ro)) 640 $g_operator
mkdev ${name}${unit}a b $blk $(($unit * 16 + 0)) 640 $g_operator
mkdev ${name}${unit}b b $blk $(($unit * 16 + 1)) 640 $g_operator
mkdev ${name}${unit}c b $blk $(($unit * 16 + 2)) 640 $g_operator
mkdev ${name}${unit}d b $blk $(($unit * 16 + 3)) 640 $g_operator
mkdev ${name}${unit}e b $blk $(($unit * 16 + 4)) 640 $g_operator
mkdev ${name}${unit}f b $blk $(($unit * 16 + 5)) 640 $g_operator
mkdev ${name}${unit}g b $blk $(($unit * 16 + 6)) 640 $g_operator
mkdev ${name}${unit}h b $blk $(($unit * 16 + 7)) 640 $g_operator
mkdev ${name}${unit}i b $blk $(($unit * 16 + 8)) 640 $g_operator
mkdev ${name}${unit}j b $blk $(($unit * 16 + 9)) 640 $g_operator
mkdev ${name}${unit}k b $blk $(($unit * 16 + 10)) 640 $g_operator
mkdev ${name}${unit}l b $blk $(($unit * 16 + 11)) 640 $g_operator
mkdev ${name}${unit}m b $blk $(($unit * 16 + 12)) 640 $g_operator
mkdev ${name}${unit}n b $blk $(($unit * 16 + 13)) 640 $g_operator
mkdev ${name}${unit}o b $blk $(($unit * 16 + 14)) 640 $g_operator
mkdev ${name}${unit}p b $blk $(($unit * 16 + 15)) 640 $g_operator
mkdev r${name}${unit}a c $chr $(($unit * 16 + 0)) 640 $g_operator
mkdev r${name}${unit}b c $chr $(($unit * 16 + 1)) 640 $g_operator
mkdev r${name}${unit}c c $chr $(($unit * 16 + 2)) 640 $g_operator
mkdev r${name}${unit}d c $chr $(($unit * 16 + 3)) 640 $g_operator
mkdev r${name}${unit}e c $chr $(($unit * 16 + 4)) 640 $g_operator
mkdev r${name}${unit}f c $chr $(($unit * 16 + 5)) 640 $g_operator
mkdev r${name}${unit}g c $chr $(($unit * 16 + 6)) 640 $g_operator
mkdev r${name}${unit}h c $chr $(($unit * 16 + 7)) 640 $g_operator
mkdev r${name}${unit}i c $chr $(($unit * 16 + 8)) 640 $g_operator
mkdev r${name}${unit}j c $chr $(($unit * 16 + 9)) 640 $g_operator
mkdev r${name}${unit}k c $chr $(($unit * 16 + 10)) 640 $g_operator
mkdev r${name}${unit}l c $chr $(($unit * 16 + 11)) 640 $g_operator
mkdev r${name}${unit}m c $chr $(($unit * 16 + 12)) 640 $g_operator
mkdev r${name}${unit}n c $chr $(($unit * 16 + 13)) 640 $g_operator
mkdev r${name}${unit}o c $chr $(($unit * 16 + 14)) 640 $g_operator
mkdev r${name}${unit}p c $chr $(($unit * 16 + 15)) 640 $g_operator
}
makedisk_p16high()
{
ho=524280 # offset for partition 9 to 16
name="$1"; unit="$2"; blk="$3"; chr="$4"
ro=%RAWDISK_OFF%
mkdev ${name}${unit} b $blk $(($unit * 8 + $ro)) 640 $g_operator
mkdev r${name}${unit} c $chr $(($unit * 8 + $ro)) 640 $g_operator
mkdev ${name}${unit}a b $blk $(($unit * 8 + 0)) 640 $g_operator
mkdev ${name}${unit}b b $blk $(($unit * 8 + 1)) 640 $g_operator
mkdev ${name}${unit}c b $blk $(($unit * 8 + 2)) 640 $g_operator
mkdev ${name}${unit}d b $blk $(($unit * 8 + 3)) 640 $g_operator
mkdev ${name}${unit}e b $blk $(($unit * 8 + 4)) 640 $g_operator
mkdev ${name}${unit}f b $blk $(($unit * 8 + 5)) 640 $g_operator
mkdev ${name}${unit}g b $blk $(($unit * 8 + 6)) 640 $g_operator
mkdev ${name}${unit}h b $blk $(($unit * 8 + 7)) 640 $g_operator
mkdev ${name}${unit}i b $blk $(($unit * 8 + $ho + 8)) 640 $g_operator
mkdev ${name}${unit}j b $blk $(($unit * 8 + $ho + 9)) 640 $g_operator
mkdev ${name}${unit}k b $blk $(($unit * 8 + $ho + 10)) 640 $g_operator
mkdev ${name}${unit}l b $blk $(($unit * 8 + $ho + 11)) 640 $g_operator
mkdev ${name}${unit}m b $blk $(($unit * 8 + $ho + 12)) 640 $g_operator
mkdev ${name}${unit}n b $blk $(($unit * 8 + $ho + 13)) 640 $g_operator
mkdev ${name}${unit}o b $blk $(($unit * 8 + $ho + 14)) 640 $g_operator
mkdev ${name}${unit}p b $blk $(($unit * 8 + $ho + 15)) 640 $g_operator
mkdev r${name}${unit}a c $chr $(($unit * 8 + 0)) 640 $g_operator
mkdev r${name}${unit}b c $chr $(($unit * 8 + 1)) 640 $g_operator
mkdev r${name}${unit}c c $chr $(($unit * 8 + 2)) 640 $g_operator
mkdev r${name}${unit}d c $chr $(($unit * 8 + 3)) 640 $g_operator
mkdev r${name}${unit}e c $chr $(($unit * 8 + 4)) 640 $g_operator
mkdev r${name}${unit}f c $chr $(($unit * 8 + 5)) 640 $g_operator
mkdev r${name}${unit}g c $chr $(($unit * 8 + 6)) 640 $g_operator
mkdev r${name}${unit}h c $chr $(($unit * 8 + 7)) 640 $g_operator
mkdev r${name}${unit}i c $chr $(($unit * 8 + $ho + 8)) 640 $g_operator
mkdev r${name}${unit}j c $chr $(($unit * 8 + $ho + 9)) 640 $g_operator
mkdev r${name}${unit}k c $chr $(($unit * 8 + $ho + 10)) 640 $g_operator
mkdev r${name}${unit}l c $chr $(($unit * 8 + $ho + 11)) 640 $g_operator
mkdev r${name}${unit}m c $chr $(($unit * 8 + $ho + 12)) 640 $g_operator
mkdev r${name}${unit}n c $chr $(($unit * 8 + $ho + 13)) 640 $g_operator
mkdev r${name}${unit}o c $chr $(($unit * 8 + $ho + 14)) 640 $g_operator
mkdev r${name}${unit}p c $chr $(($unit * 8 + $ho + 15)) 640 $g_operator
}
# make only the very few basic disk device nodes - 'a' partition
# and raw partition
makedisk_minimal()
{
name=$1; unit=$2; blk=$3; chr=$4
doff=%DISKMINOROFFSET%
ro=%RAWDISK_OFF%
rn=%RAWDISK_NAME%
mkdev ${name}${unit} b $blk $(($unit * $doff + $ro)) 640 $g_operator
mkdev r${name}${unit} c $chr $(($unit * $doff + $ro)) 640 $g_operator
mkdev ${name}${unit}a b $blk $(($unit * $doff + 0)) 640 $g_operator
mkdev ${name}${unit}$rn b $blk $(($unit * $doff + $ro)) 640 $g_operator
mkdev r${name}${unit}a c $chr $(($unit * $doff + 0)) 640 $g_operator
mkdev r${name}${unit}$rn c $chr $(($unit * $doff + $ro)) 640 $g_operator
}
# create_mfs_dev nodes
# Create a memory file system for a given number of device nodes,
# and mount it. Attempts to use mount_tmpfs, or falls back to
# mount_mfs.
#
# If do_redirect, then also redirect output to the console.
#
create_mfs_dev()
{
ndevnodes=${1-1200}
dev_mountpoint=${PWD:-/dev}
# Number of inodes is the specified number of device nodes, plus
# a margin to allow for extra device nodes created later.
ninode=$((ndevnodes * 11 / 10))
# Add 2 reserved inodes (needed for both mfs and tmpfs), and round
# up to a multiple of 32 (needed for mfs, not needed for tmpfs).
ninode=$(( (ninode + 2 + 31) / 32 * 32 ))
# Try tmpfs; if that fails try mfs.
#
# For tmpfs, allocate 16KB and 512 byte per node.
# Actual requirements are much lower, but the size limit
# is only intended to avoid accidental writing to /dev.
fs_bytes=$((16384 + ninode * 512))
if mount_tmpfs -s $fs_bytes -n $ninode -m 0755 \
-o union tmpfs "$dev_mountpoint"
then
fstype=tmpfs
else
# This file system size calculation is exact for mount_mfs(8)
# with 512-byte sectors. 40960 bytes (80 blocks) is the
# minimum size allowed by mount_mfs.
fs_bytes=$((8192 + 2 * 8192 + 4096 + ninode*512 + 8192))
[ "$fs_bytes" -lt 40960 ] && fs_bytes=40960
fs_blocks=$((fs_bytes/512))
if mount_mfs -b 4096 -f 512 -s $fs_blocks -n $ninode -p 0755 \
-o union swap "$dev_mountpoint"
then
fstype=mfs
else
die "Failed to create memory file system"
fi
fi
# Our current directory was in the lower file system; change it to
# the newly mounted upper file system.
cd "$dev_mountpoint"
if $do_redirect; then
# Redirect stdout and stderr to console
${MKNOD} -m 600 -g 0 -u 0 temp_console c %CONSOLE_CMAJOR% 0
exec >temp_console 2>&1
rm temp_console
fi
echo "Created $fstype $dev_mountpoint" \
"($fs_bytes byte, $ninode inodes)"
}
#
# MAIN: If MAKEDEV_AS_LIBRARY is set, then we are being used as a
# function library, so just return. Otherwise, do all the real work.
#
[ -n "${MAKEDEV_AS_LIBRARY}" ] && return
makedev_main makedev ${1+"$@"}
Reference in New Issue View Git Blame Copy Permalink