Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/ic/upc.c

391 lines
11 KiB
C
Raw Blame History

/* $NetBSD: upc.c,v 1.6 2003/03/02 00:21:47 bjh21 Exp $ */
/*-
* Copyright (c) 2000, 2003 Ben Harris
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* upc - driver for C&T Universal Peripheral Controllers
*
* Supports:
* 82C710 Universal Peripheral Controller
* 82C711 Universal Peripheral Controller II
* 82C721 Universal Peripheral Controller III (untested)
*
* The 82C710 is substantially different from its successors.
* Functions that just handle the 82C710 are named upc1_*, which those
* that handle the 82C711 and 82C721 are named upc2_*.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: upc.c,v 1.6 2003/03/02 00:21:47 bjh21 Exp $");
#include <sys/param.h>
#include <sys/device.h>
#include <sys/systm.h>
#include <machine/bus.h>
#include <dev/ata/atavar.h> /* XXX needed by wdcvar.h */
#include <dev/ic/comreg.h>
#include <dev/ic/lptreg.h>
#include <dev/ic/lptvar.h>
#include <dev/ic/wdcvar.h>
#include <dev/ic/upcreg.h>
#include <dev/ic/upcvar.h>
#include "locators.h"
/* Conventional port to use for 82C710 configuration */
#define UPC1_PORT_CRI 0x390
#define UPC1_PORT_CAP (UPC1_PORT_CRI + 1)
static int upc1_probe(struct upc_softc *);
static void upc1_attach(struct upc_softc *);
static void upc2_attach(struct upc_softc *);
static void upc_found(struct upc_softc *, char const *, int, int,
struct upc_irqhandle *);
static void upc_found2(struct upc_softc *, char const *, int, int, int, int,
struct upc_irqhandle *);
static int upc_print(void *, char const *);
static int upc_submatch(struct device *, struct cfdata *, void *);
static int upc2_com3_addr(int);
static int upc2_com4_addr(int);
void
upc_attach(struct upc_softc *sc)
{
if (upc1_probe(sc))
upc1_attach(sc);
else
upc2_attach(sc);
}
static int
upc1_probe(struct upc_softc *sc)
{
return upc1_read_config(sc, UPC1_CFGADDR_CONFBASE) ==
UPC1_PORT_CRI >> UPC1_CONFBASE_SHIFT;
}
static void
upc1_attach(struct upc_softc *sc)
{
u_int8_t cr[16];
int i;
aprint_normal(": 82C710\n");
/* Dump configuration */
for (i = 0; i < 16; i++)
cr[i] = upc1_read_config(sc, i);
aprint_verbose("%s: config state", sc->sc_dev.dv_xname);
for (i = 0; i < 16; i++)
aprint_verbose(" %02x", cr[i]);
aprint_verbose("\n");
/* FDC */
if (cr[UPC1_CFGADDR_CRC] & UPC1_CRC_FDCEN)
upc_found(sc, "fdc", UPC_PORT_FDCBASE, 2, &sc->sc_fintr);
/* IDE */
if (cr[UPC1_CFGADDR_CRC] & UPC1_CRC_IDEEN)
upc_found2(sc, "wdc", UPC_PORT_IDECMDBASE, 8,
UPC_PORT_IDECTLBASE, 2, &sc->sc_wintr);
/* Parallel */
if (cr[UPC1_CFGADDR_CR0] & UPC1_CR0_PEN)
upc_found(sc, "lpt",
cr[UPC1_CFGADDR_PARBASE] << UPC1_PARBASE_SHIFT,
LPT_NPORTS, &sc->sc_pintr);
/* UART */
if (cr[UPC1_CFGADDR_CR0] & UPC1_CR0_SEN)
upc_found(sc, "com",
cr[UPC1_CFGADDR_UARTBASE] << UPC1_UARTBASE_SHIFT,
COM_NPORTS, &sc->sc_irq4);
/* Mouse */
/* XXX not yet supported */
}
static void
upc2_attach(struct upc_softc *sc)
{
u_int8_t cr[5];
int i;
aprint_normal(": 82C711/82C721");
/* Dump configuration */
for (i = 0; i < 5; i++)
cr[i] = upc2_read_config(sc, i);
aprint_verbose(", config state %02x %02x %02x %02x %02x",
cr[0], cr[1], cr[2], cr[3], cr[4]);
aprint_normal("\n");
/* "Find" the attached devices */
/* FDC */
if (cr[0] & UPC2_CR0_FDC_ENABLE)
upc_found(sc, "fdc", UPC_PORT_FDCBASE, 2, &sc->sc_fintr);
/* IDE */
if (cr[0] & UPC2_CR0_IDE_ENABLE)
upc_found2(sc, "wdc", UPC_PORT_IDECMDBASE, 8,
UPC_PORT_IDECTLBASE, 2, &sc->sc_wintr);
/* Parallel */
switch (cr[1] & UPC2_CR1_LPT_MASK) {
case UPC2_CR1_LPT_3BC:
upc_found(sc, "lpt", 0x3bc, LPT_NPORTS, &sc->sc_pintr);
break;
case UPC2_CR1_LPT_378:
upc_found(sc, "lpt", 0x378, LPT_NPORTS, &sc->sc_pintr);
break;
case UPC2_CR1_LPT_278:
upc_found(sc, "lpt", 0x278, LPT_NPORTS, &sc->sc_pintr);
break;
}
/* UART1 */
if (cr[2] & UPC2_CR2_UART1_ENABLE) {
switch (cr[2] & UPC2_CR2_UART1_MASK) {
case UPC2_CR2_UART1_3F8:
upc_found(sc, "com", 0x3f8, COM_NPORTS, &sc->sc_irq4);
break;
case UPC2_CR2_UART1_2F8:
upc_found(sc, "com", 0x2f8, COM_NPORTS, &sc->sc_irq3);
break;
case UPC2_CR2_UART1_COM3:
upc_found(sc, "com", upc2_com3_addr(cr[1]), COM_NPORTS,
&sc->sc_irq4);
break;
case UPC2_CR2_UART1_COM4:
upc_found(sc, "com", upc2_com4_addr(cr[1]), COM_NPORTS,
&sc->sc_irq3);
break;
}
}
/* UART2 */
if (cr[2] & UPC2_CR2_UART2_ENABLE) {
switch (cr[2] & UPC2_CR2_UART2_MASK) {
case UPC2_CR2_UART2_3F8:
upc_found(sc, "com", 0x3f8, COM_NPORTS, &sc->sc_irq4);
break;
case UPC2_CR2_UART2_2F8:
upc_found(sc, "com", 0x2f8, COM_NPORTS, &sc->sc_irq3);
break;
case UPC2_CR2_UART2_COM3:
upc_found(sc, "com", upc2_com3_addr(cr[1]), COM_NPORTS,
&sc->sc_irq4);
break;
case UPC2_CR2_UART2_COM4:
upc_found(sc, "com", upc2_com4_addr(cr[1]), COM_NPORTS,
&sc->sc_irq3);
break;
}
}
}
static void
upc_found(struct upc_softc *sc, char const *devtype, int offset, int size,
struct upc_irqhandle *uih)
{
struct upc_attach_args ua;
ua.ua_devtype = devtype;
ua.ua_offset = offset;
ua.ua_iot = sc->sc_iot;
bus_space_subregion(sc->sc_iot, sc->sc_ioh, offset, size, &ua.ua_ioh);
ua.ua_irqhandle = uih;
config_found_sm(&sc->sc_dev, &ua, upc_print, upc_submatch);
}
static void
upc_found2(struct upc_softc *sc, char const *devtype, int offset, int size,
int offset2, int size2, struct upc_irqhandle *uih)
{
struct upc_attach_args ua;
ua.ua_devtype = devtype;
ua.ua_offset = offset;
ua.ua_iot = sc->sc_iot;
bus_space_subregion(sc->sc_iot, sc->sc_ioh, offset, size, &ua.ua_ioh);
bus_space_subregion(sc->sc_iot, sc->sc_ioh, offset2, size2,
&ua.ua_ioh2);
ua.ua_irqhandle = uih;
config_found_sm(&sc->sc_dev, &ua, upc_print, upc_submatch);
}
void
upc_intr_establish(struct upc_irqhandle *uih, int level, int (*func)(void *),
void *arg) {
uih->uih_level = level;
uih->uih_func = func;
uih->uih_arg = arg;
/* Actual MD establishment will be handled later by bus attachment. */
}
static int
upc2_com3_addr(int cr1)
{
switch (cr1 & UPC2_CR1_COM34_MASK) {
case UPC2_CR1_COM34_338_238:
return 0x338;
case UPC2_CR1_COM34_3E8_2E8:
return 0x3e8;
case UPC2_CR1_COM34_2E8_2E0:
return 0x2e8;
case UPC2_CR1_COM34_220_228:
return 0x220;
}
return -1;
}
static int
upc2_com4_addr(int cr1)
{
switch (cr1 & UPC2_CR1_COM34_MASK) {
case UPC2_CR1_COM34_338_238:
return 0x238;
case UPC2_CR1_COM34_3E8_2E8:
return 0x2e8;
case UPC2_CR1_COM34_2E8_2E0:
return 0x2e0;
case UPC2_CR1_COM34_220_228:
return 0x228;
}
return -1;
}
static int
upc_print(void *aux, char const *pnp)
{
struct upc_attach_args *ua = aux;
if (pnp)
aprint_normal("%s at %s", ua->ua_devtype, pnp);
aprint_normal(" offset 0x%x", ua->ua_offset);
return UNCONF;
}
static int
upc_submatch(struct device *parent, struct cfdata *cf, void *aux)
{
struct upc_attach_args *ua = aux;
if (strcmp(cf->cf_name, ua->ua_devtype) == 0 &&
(cf->cf_loc[UPCCF_OFFSET] == UPCCF_OFFSET_DEFAULT ||
cf->cf_loc[UPCCF_OFFSET] == ua->ua_offset))
return config_match(parent, cf, aux);
return 0;
}
int
upc1_read_config(struct upc_softc *sc, int reg)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int retval;
/* Switch into configuration mode. */
bus_space_write_1(iot, ioh, UPC1_PORT_CFG1, UPC1_CFGMAGIC_1);
bus_space_write_1(iot, ioh, UPC1_PORT_CFG2, UPC1_CFGMAGIC_2);
bus_space_write_1(iot, ioh, UPC1_PORT_CFG2, UPC1_CFGMAGIC_3);
bus_space_write_1(iot, ioh, UPC1_PORT_CFG2,
UPC1_PORT_CRI >> UPC1_CONFBASE_SHIFT);
bus_space_write_1(iot, ioh, UPC1_PORT_CFG1,
(UPC1_PORT_CRI >> UPC1_CONFBASE_SHIFT) ^ 0xff);
/* Read register. */
bus_space_write_1(iot, ioh, UPC1_PORT_CRI, reg);
retval = bus_space_read_1(iot, ioh, UPC1_PORT_CAP);
/* Leave configuration mode. */
bus_space_write_1(iot, ioh, UPC1_PORT_CRI, UPC1_CFGADDR_EXIT);
bus_space_write_1(iot, ioh, UPC1_PORT_CAP, 0);
return retval;
}
void
upc1_write_config(struct upc_softc *sc, int reg, int val)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
/* Switch into configuration mode. */
bus_space_write_1(iot, ioh, UPC1_PORT_CFG1, UPC1_CFGMAGIC_1);
bus_space_write_1(iot, ioh, UPC1_PORT_CFG2, UPC1_CFGMAGIC_2);
bus_space_write_1(iot, ioh, UPC1_PORT_CFG2, UPC1_CFGMAGIC_3);
bus_space_write_1(iot, ioh, UPC1_PORT_CFG2,
UPC1_PORT_CRI >> UPC1_CONFBASE_SHIFT);
bus_space_write_1(iot, ioh, UPC1_PORT_CFG1,
(UPC1_PORT_CRI >> UPC1_CONFBASE_SHIFT) ^ 0xff);
/* Read register. */
bus_space_write_1(iot, ioh, UPC1_PORT_CRI, reg);
bus_space_write_1(iot, ioh, UPC1_PORT_CAP, val);
/* Leave configuration mode. */
bus_space_write_1(iot, ioh, UPC1_PORT_CRI, UPC1_CFGADDR_EXIT);
bus_space_write_1(iot, ioh, UPC1_PORT_CAP, 0);
}
int
upc2_read_config(struct upc_softc *sc, int reg)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int retval;
/* Switch into configuration mode. */
bus_space_write_1(iot, ioh, UPC2_PORT_CFGADDR, UPC2_CFGMAGIC_ENTER);
bus_space_write_1(iot, ioh, UPC2_PORT_CFGADDR, UPC2_CFGMAGIC_ENTER);
/* Read register. */
bus_space_write_1(iot, ioh, UPC2_PORT_CFGADDR, reg);
retval = bus_space_read_1(iot, ioh, UPC2_PORT_CFGDATA);
/* Leave configuration mode. */
bus_space_write_1(iot, ioh, UPC2_PORT_CFGADDR, UPC2_CFGMAGIC_EXIT);
return retval;
}
void
upc2_write_config(struct upc_softc *sc, int reg, int val)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
/* Switch into configuration mode. */
bus_space_write_1(iot, ioh, UPC2_PORT_CFGADDR, UPC2_CFGMAGIC_ENTER);
bus_space_write_1(iot, ioh, UPC2_PORT_CFGADDR, UPC2_CFGMAGIC_ENTER);
/* Write register. */
bus_space_write_1(iot, ioh, UPC2_PORT_CFGADDR, reg);
bus_space_write_1(iot, ioh, UPC2_PORT_CFGDATA, val);
/* Leave configuration mode. */
bus_space_write_1(iot, ioh, UPC2_PORT_CFGADDR, UPC2_CFGMAGIC_EXIT);
}
Reference in New Issue View Git Blame Copy Permalink