NetBSD/etc/rc.conf

123 lines
3.9 KiB
Plaintext

# $NetBSD: rc.conf,v 1.55 1999/07/07 21:24:56 drochner Exp $
#
# see rc.conf(5) for more information.
# uncomment this if you want to use local paths in rc
#export PATH=$PATH:/usr/pkg/sbin:/usr/pkg/bin:/usr/local/sbin:/usr/local/bin
# Use program=YES to enable program, NO to disable it. program_flags are
# passed to the program on the command line.
# If this is not set to YES, the system will drop into single-user mode.
rc_configured=NO
# If this is set to NO, shutdown(8) will not run /etc/rc.shutdown.
do_rcshutdown=YES
# Basic network configuration
# Fully Qualified Internet Domain Name (a.k.a. hostname, e.g. foo.baz.edu)
hostname="" # if blank, use /etc/myname
# if there's only one way out of your network, set this to the hostname
# or the IP address of the router that will get your packets off the LAN.
defaultroute="" # if blank, use /etc/mygate
# the NIS domain name (formerly known as Yellow Pages); not in any way
# related to Internet domain names.
domainname="" # if blank, use /etc/defaultdomain
# Filesystems to mount early in boot-up
critical_filesystems_beforenet="/usr /var" # "netstart" needs /usr
critical_filesystems=""
# Set this to YES if you have purposefully setup no swap partitions and
# don't want to be warned about it
no_swap=NO
# One-time actions and programs on boot-up.
lkm=NO # run /etc/rc.lkm
savecore=YES savecore_flags=""
update_motd=YES # updates /etc/motd
dmesg=YES dmesg_flags="" # write /var/run/dmesg.boot
# Security setting. If $securelevel is non-empty, the system securelevel
# is set to this value early in the boot sequence. Otherwise the default
# action is taken (see init(8)).
securelevel="" # securelevel to set to
# Networking startup
ipfilter=NO # uses /etc/ipf.conf
ipnat=NO # uses /etc/ipnat.conf
ipmon=NO ipmon_flags="-sn" # syslog ipfilter messages
auto_ifconfig=YES # config all avail. interfaces
net_interfaces="" # used only if above is NO
flushroutes=YES # flush routes in netstart
dhclient=NO # behave as a DHCP client
dhclient_flags="" # blank: config all interfaces
ntpdate=NO ntpdate_hosts="" # blank: hosts in /etc/ntp.conf
ppp_peers="" # /etc/ppp/peers to call
ip6forwarding="NO" # IPv6 router
rtsol="NO" rtsol_flags="" # IPv6 autoconf (on non-router)
# Daemons required by other daemons
inetd=YES inetd_flags="-l" # -l logs libwrap
portmap=YES portmap_flags="-l" # -l logs libwrap
# Commonly used daemons
update=YES update_flags="30"
syslogd=YES syslogd_flags="-s" # -s "secure" unix domain only
cron=YES
named=NO named_flags=""
timed=NO timed_flags=""
xntpd=NO xntpd_flags="-p /var/run/xntpd.pid"
sendmail=NO sendmail_flags="-bd -q30m"
lpd=NO lpd_flags="-s" # -s "secure" unix domain only
# Routing daemons
routed=NO routed_flags="-q"
gated=NO gated_flags=""
mrouted=NO mrouted_flags=""
route6d=NO route6d_flags=""
# Daemons used to boot other hosts over a network
rarpd=NO rarpd_flags="-a"
bootparamd=NO bootparamd_flags=""
dhcpd=NO dhcpd_flags="-q"
dhcrelay=NO dhcrelay_flags=""
rbootd=NO rbootd_flags=""
mopd=NO mopd_flags="-a"
rtadvd=NO rtadvd_flags=""
# X11 daemons:
xfs=NO xfs_flags="" # X11 font server
xdm=NO xdm_flags="" # x11 display manager
# YP (NIS) daemons
ypbind=NO ypbind_flags=""
ypserv=NO ypserv_flags="-d"
yppasswdd=NO yppasswdd_flags=""
# NFS daemons and parameters
nfs_client=NO # enable client daemons
nfsiod_flags="-n 4"
nfs_server=NO # enable server daemons
mountd_flags=""
nfsd_flags="-tun 4"
lockd=NO lockd_flags=""
statd=NO statd_flags=""
amd=NO amd_flags="-l syslog -x error,noinfo,nostats"
amd_dir=/amd # mount dir
amd_master=/etc/amd/master # master map
# Other daemons
rwhod=NO
kerberos=NO
# Hardware daemons
apmd=NO apmd_flags="" # APM power management daemon.
screenblank=NO screenblank_flags="" # sparc and sun3 screenblanker
# configuration of "wscons" console driver virtual screens
wscons=NO wscons_flags="" # run /etc/rc.wscons