NetBSD/sys/arch/hpcmips/dev/plumpower.c

302 lines
8.2 KiB
C

/* $NetBSD: plumpower.c,v 1.2 1999/12/07 17:21:45 uch Exp $ */
/*
* Copyright (c) 1999, by UCHIYAMA Yasushi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. The name of the developer may NOT be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include "opt_tx39_debug.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <machine/bus.h>
#include <machine/intr.h>
#include <hpcmips/tx/tx39var.h>
#include <hpcmips/dev/plumvar.h>
#include <hpcmips/dev/plumpowervar.h>
#include <hpcmips/dev/plumpowerreg.h>
int plumpower_match __P((struct device*, struct cfdata*, void*));
void plumpower_attach __P((struct device*, struct device*, void*));
struct plumpower_softc {
struct device sc_dev;
plum_chipset_tag_t sc_pc;
bus_space_tag_t sc_regt;
bus_space_handle_t sc_regh;
};
struct cfattach plumpower_ca = {
sizeof(struct plumpower_softc), plumpower_match, plumpower_attach
};
void plumpower_dump __P((struct plumpower_softc*));
int
plumpower_match(parent, cf, aux)
struct device *parent;
struct cfdata *cf;
void *aux;
{
return 2; /* 1st attach group */
}
void
plumpower_attach(parent, self, aux)
struct device *parent;
struct device *self;
void *aux;
{
struct plum_attach_args *pa = aux;
struct plumpower_softc *sc = (void*)self;
printf("\n");
sc->sc_pc = pa->pa_pc;
sc->sc_regt = pa->pa_regt;
if (bus_space_map(sc->sc_regt, PLUM_POWER_REGBASE,
PLUM_POWER_REGSIZE, 0, &sc->sc_regh)) {
printf(": register map failed\n");
return;
}
plum_conf_register_power(sc->sc_pc, (void*)sc);
plumpower_dump(sc);
/* disable all power/clock */
plum_conf_write(sc->sc_regt, sc->sc_regh,
PLUM_POWER_PWRCONT_REG, 0);
plum_conf_write(sc->sc_regt, sc->sc_regh,
PLUM_POWER_CLKCONT_REG, 0);
delay(300 * 1000);
/* enable MCS interface from TX3922 */
plum_conf_write(sc->sc_regt, sc->sc_regh, PLUM_POWER_INPENA_REG,
PLUM_POWER_INPENA);
plumpower_dump(sc);
}
void
plum_power_ioreset(pc)
plum_chipset_tag_t pc;
{
struct plumpower_softc *sc = pc->pc_powert;
bus_space_tag_t regt = sc->sc_regt;
bus_space_handle_t regh = sc->sc_regh;
plum_conf_write(regt, regh, PLUM_POWER_RESETC_REG,
PLUM_POWER_RESETC_IO5CL1 |
PLUM_POWER_RESETC_IO5CL1);
delay(100*1000);
plum_conf_write(regt, regh, PLUM_POWER_RESETC_REG, 0);
delay(100*1000);
}
void*
plum_power_establish(pc, src)
plum_chipset_tag_t pc;
int src;
{
struct plumpower_softc *sc = pc->pc_powert;
bus_space_tag_t regt = sc->sc_regt;
bus_space_handle_t regh = sc->sc_regh;
plumreg_t pwrreg, clkreg;
pwrreg = plum_conf_read(regt, regh, PLUM_POWER_PWRCONT_REG);
clkreg = plum_conf_read(regt, regh, PLUM_POWER_CLKCONT_REG);
switch(src) {
default:
panic("plum_power_establish: unknown power source");
case PLUM_PWR_LCD:
pwrreg |= PLUM_POWER_PWRCONT_LCDPWR;
plum_conf_write(regt, regh, PLUM_POWER_PWRCONT_REG, pwrreg);
pwrreg |= PLUM_POWER_PWRCONT_LCDDSP;
plum_conf_write(regt, regh, PLUM_POWER_PWRCONT_REG, pwrreg);
pwrreg |= PLUM_POWER_PWRCONT_LCDOE;
plum_conf_write(regt, regh, PLUM_POWER_PWRCONT_REG, pwrreg);
break;
case PLUM_PWR_BKL:
pwrreg |= PLUM_POWER_PWRCONT_BKLIGHT;
break;
case PLUM_PWR_IO5:
/* reset I/O bus (High/Low) */
plum_power_ioreset(pc);
/* supply power */
pwrreg |= PLUM_POWER_PWRCONT_IO5PWR;
plum_conf_write(regt, regh, PLUM_POWER_PWRCONT_REG, pwrreg);
delay(300*1000);
/* output enable & supply clock */
pwrreg |= PLUM_POWER_PWRCONT_IO5OE;
clkreg |= PLUM_POWER_CLKCONT_IO5CLK;
break;
case PLUM_PWR_EXTPW0:
pwrreg |= PLUM_POWER_PWRCONT_EXTPW0;
break;
case PLUM_PWR_EXTPW1:
pwrreg |= PLUM_POWER_PWRCONT_EXTPW1;
break;
case PLUM_PWR_EXTPW2:
pwrreg |= PLUM_POWER_PWRCONT_EXTPW2;
break;
case PLUM_PWR_USB:
/* output enable */
pwrreg |= PLUM_POWER_PWRCONT_USBEN;
/* supply clock to the USB host controller */
clkreg |= PLUM_POWER_CLKCONT_USBCLK1;
/* clock supply is adaptively controlled by hardware */
clkreg &= ~PLUM_POWER_CLKCONT_USBCLK2;
break;
case PLUM_PWR_SM:
clkreg |= PLUM_POWER_CLKCONT_SMCLK;
break;
case PLUM_PWR_PCC1:
clkreg |= PLUM_POWER_CLKCONT_PCCCLK1;
break;
case PLUM_PWR_PCC2:
clkreg |= PLUM_POWER_CLKCONT_PCCCLK2;
break;
}
plum_conf_write(regt, regh, PLUM_POWER_PWRCONT_REG, pwrreg);
delay(300*1000);
plum_conf_write(regt, regh, PLUM_POWER_CLKCONT_REG, clkreg);
delay(300*1000);
plumpower_dump(sc);
return (void*)src;
}
void
plum_power_disestablish(pc, ph)
plum_chipset_tag_t pc;
int ph;
{
struct plumpower_softc *sc = pc->pc_powert;
bus_space_tag_t regt = sc->sc_regt;
bus_space_handle_t regh = sc->sc_regh;
int src = (int)ph;
plumreg_t pwrreg, clkreg;
pwrreg = plum_conf_read(regt, regh, PLUM_POWER_PWRCONT_REG);
clkreg = plum_conf_read(regt, regh, PLUM_POWER_CLKCONT_REG);
switch(src) {
default:
panic("plum_power_disestablish: unknown power source");
case PLUM_PWR_LCD:
pwrreg &= ~(PLUM_POWER_PWRCONT_LCDOE |
PLUM_POWER_PWRCONT_LCDPWR |
PLUM_POWER_PWRCONT_LCDDSP);
break;
case PLUM_PWR_BKL:
pwrreg &= ~PLUM_POWER_PWRCONT_BKLIGHT;
break;
case PLUM_PWR_IO5:
pwrreg &= ~(PLUM_POWER_PWRCONT_IO5PWR |
PLUM_POWER_PWRCONT_IO5OE);
clkreg &= ~PLUM_POWER_CLKCONT_IO5CLK;
break;
case PLUM_PWR_EXTPW0:
pwrreg &= ~PLUM_POWER_PWRCONT_EXTPW0;
break;
case PLUM_PWR_EXTPW1:
pwrreg &= ~PLUM_POWER_PWRCONT_EXTPW1;
break;
case PLUM_PWR_EXTPW2:
pwrreg &= ~PLUM_POWER_PWRCONT_EXTPW2;
break;
case PLUM_PWR_USB:
pwrreg &= ~PLUM_POWER_PWRCONT_USBEN;
clkreg &= ~(PLUM_POWER_CLKCONT_USBCLK1 |
PLUM_POWER_CLKCONT_USBCLK2);
break;
case PLUM_PWR_SM:
clkreg &= ~PLUM_POWER_CLKCONT_SMCLK;
break;
case PLUM_PWR_PCC1:
clkreg &= ~PLUM_POWER_CLKCONT_PCCCLK1;
break;
case PLUM_PWR_PCC2:
clkreg &= ~PLUM_POWER_CLKCONT_PCCCLK2;
break;
}
plum_conf_write(regt, regh, PLUM_POWER_PWRCONT_REG, pwrreg);
plum_conf_write(regt, regh, PLUM_POWER_CLKCONT_REG, clkreg);
plumpower_dump(sc);
}
#define ISPOWERSUPPLY(r, m) __is_set_print(r, PLUM_POWER_PWRCONT_##m, #m)
#define ISCLOCKSUPPLY(r, m) __is_set_print(r, PLUM_POWER_CLKCONT_##m, #m)
void
plumpower_dump(sc)
struct plumpower_softc *sc;
{
bus_space_tag_t regt = sc->sc_regt;
bus_space_handle_t regh = sc->sc_regh;
plumreg_t reg;
reg = plum_conf_read(regt, regh, PLUM_POWER_PWRCONT_REG);
printf(" power:");
ISPOWERSUPPLY(reg, USBEN);
ISPOWERSUPPLY(reg, IO5OE);
ISPOWERSUPPLY(reg, LCDOE);
ISPOWERSUPPLY(reg, EXTPW2);
ISPOWERSUPPLY(reg, EXTPW1);
ISPOWERSUPPLY(reg, EXTPW0);
ISPOWERSUPPLY(reg, IO5PWR);
ISPOWERSUPPLY(reg, BKLIGHT);
ISPOWERSUPPLY(reg, LCDPWR);
ISPOWERSUPPLY(reg, LCDDSP);
reg = plum_conf_read(regt, regh, PLUM_POWER_CLKCONT_REG);
printf("\n clock:");
ISCLOCKSUPPLY(reg, USBCLK2);
ISCLOCKSUPPLY(reg, USBCLK1);
ISCLOCKSUPPLY(reg, IO5CLK);
ISCLOCKSUPPLY(reg, SMCLK);
ISCLOCKSUPPLY(reg, PCCCLK2);
ISCLOCKSUPPLY(reg, PCCCLK1);
reg = plum_conf_read(regt, regh, PLUM_POWER_INPENA_REG);
printf("\n MCS interface %sebled",
reg & PLUM_POWER_INPENA ? "en" : "dis");
reg = plum_conf_read(regt, regh, PLUM_POWER_RESETC_REG);
printf("\n IO5 reset:%s %s",
reg & PLUM_POWER_RESETC_IO5CL0 ? "CLRL" : "",
reg & PLUM_POWER_RESETC_IO5CL1 ? "CLRH" : "");
printf("\n");
}