386 lines
10 KiB
C
386 lines
10 KiB
C
/* $NetBSD: if_le_mca.c,v 1.10 2005/02/28 07:36:48 jdolecek Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 2001 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Jaromir Dolecek.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Driver for SKNET Personal and MC2+ cards, which are AMD Lance 7990 based
|
|
* cards made by Syskonnect, former Schneider & Koch Datensysteme GmbH.
|
|
*
|
|
* Syskonnect was very helpful and provided docs for these cards promptly.
|
|
* I wish all vendors would be like that!
|
|
* I'd like to thank to Alfred Arnold, author of the Linux driver, for
|
|
* giving me contact to The Right Syskonnect person, too :-)
|
|
*
|
|
* Sources:
|
|
* SKNET MC+ Technical Manual, version 1.1, July 21 1993
|
|
* SKNET personal Technisches Manual, version 1.2, April 14 1988
|
|
* SKNET junior Technisches Manual, version 1.0, July 14 1987
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: if_le_mca.c,v 1.10 2005/02/28 07:36:48 jdolecek Exp $");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/syslog.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/device.h>
|
|
|
|
#include <uvm/uvm_extern.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_ether.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <machine/cpu.h>
|
|
#include <machine/intr.h>
|
|
#include <machine/bus.h>
|
|
|
|
#include <dev/ic/lancereg.h>
|
|
#include <dev/ic/lancevar.h>
|
|
#include <dev/ic/am7990reg.h>
|
|
#include <dev/ic/am7990var.h>
|
|
|
|
#include <dev/mca/mcareg.h>
|
|
#include <dev/mca/mcavar.h>
|
|
#include <dev/mca/mcadevs.h>
|
|
|
|
#include <dev/mca/if_lereg.h>
|
|
|
|
int le_mca_match(struct device *, struct cfdata *, void *);
|
|
void le_mca_attach(struct device *, struct device *, void *);
|
|
|
|
struct le_mca_softc {
|
|
struct am7990_softc sc_am7990; /* glue to MI code */
|
|
|
|
void *sc_ih;
|
|
bus_space_tag_t sc_memt;
|
|
bus_space_handle_t sc_memh;
|
|
};
|
|
|
|
static void le_mca_wrcsr(struct lance_softc *, u_int16_t, u_int16_t);
|
|
static u_int16_t le_mca_rdcsr(struct lance_softc *, u_int16_t);
|
|
static void le_mca_hwreset(struct lance_softc *);
|
|
static int le_mca_intredge(void *);
|
|
|
|
static void le_mca_copytobuf(struct lance_softc *, void *, int, int);
|
|
static void le_mca_copyfrombuf(struct lance_softc *, void *, int, int);
|
|
static void le_mca_zerobuf(struct lance_softc *, int, int);
|
|
|
|
static __inline void le_mca_wrreg(struct le_mca_softc *, int, int);
|
|
#define le_mca_set_RAP(sc, reg_number) \
|
|
le_mca_wrreg(sc, reg_number, RAP | REGWRITE)
|
|
|
|
CFATTACH_DECL(le_mca, sizeof(struct le_mca_softc),
|
|
le_mca_match, le_mca_attach, NULL, NULL);
|
|
|
|
/* SKNET MC+ POS mapping */
|
|
static const u_int8_t sknet_mcp_irq[] = {
|
|
3, 5, 10, 11
|
|
};
|
|
static const u_int8_t sknet_mcp_media[] = {
|
|
IFM_ETHER|IFM_10_2,
|
|
IFM_ETHER|IFM_10_T,
|
|
IFM_ETHER|IFM_10_5,
|
|
0
|
|
};
|
|
|
|
int
|
|
le_mca_match(struct device *parent, struct cfdata *cf, void *aux)
|
|
{
|
|
struct mca_attach_args *ma = aux;
|
|
|
|
switch(ma->ma_id) {
|
|
case MCA_PRODUCT_SKNETPER:
|
|
case MCA_PRODUCT_SKNETG:
|
|
return (1);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
le_mca_attach(struct device *parent, struct device *self, void *aux)
|
|
{
|
|
struct le_mca_softc *lesc = (struct le_mca_softc *) self;
|
|
struct lance_softc *sc = &lesc->sc_am7990.lsc;
|
|
struct mca_attach_args *ma = aux;
|
|
int i, pos2, pos3, pos4, irq, membase, supmedia=0;
|
|
const char *typestr;
|
|
|
|
/*
|
|
* SKNET Personal:
|
|
*
|
|
* POS register 2: (adf pos0)
|
|
*
|
|
* 7 6 5 4 3 2 1 0
|
|
* | \___/ \__ enable: 0=adapter disabled, 1=adapter enabled
|
|
* \ \____ Memory: 0xC0000-0xC3FFF + XX*0x4000
|
|
* \________ IRQ: 0=10 1=11
|
|
*
|
|
*
|
|
* SKNET MC+:
|
|
* POS register 2: (adf pos0)
|
|
*
|
|
* 7 6 5 4 3 2 1 0
|
|
* \___/ \ \__ enable: 0=adapter disabled, 1=adapter enabled
|
|
* \ \___ BootEPROM disable
|
|
* \_____ BootEPROM start address: 0xC0000 + XX*0x4000
|
|
*
|
|
* POS register 3: (adf pos1)
|
|
*
|
|
* 7 6 5 4 3 2 1 0
|
|
* 0 0 1 1 \_____/
|
|
* \__ RAM: 0xC0000 + XX*0x4000
|
|
*
|
|
* POS register 4: (adf pos2)
|
|
*
|
|
* 7 6 5 4 3 2 1 0
|
|
* \_/ \_/ \_/
|
|
* \ \ \__ Need to be reset to 0 0 after boot
|
|
* \ \_____ IRQ: 00=3 01=5 10=10 11=11
|
|
* \____________ Medium: 00=BNC 01=UTP 10=AUI 11=not allowed
|
|
*/
|
|
|
|
switch (ma->ma_id) {
|
|
case MCA_PRODUCT_SKNETPER:
|
|
typestr = "Personal MC2";
|
|
|
|
pos2 = mca_conf_read(ma->ma_mc, ma->ma_slot, 2);
|
|
irq = (pos2 & (1<<4)) ? 11 : 10;
|
|
membase = 0xc0000 + ((pos2 & 0x0e) >> 1) * 0x4000;
|
|
break;
|
|
case MCA_PRODUCT_SKNETG:
|
|
typestr = "MC2+";
|
|
|
|
/*
|
|
* SKNET MC+ needs the driver to clear 0, 1 bits of pos4
|
|
* and explicitly set the enable bit. Somebody at Syskonnect
|
|
* was obviously misguided when the card was designed ...
|
|
*/
|
|
pos3 = mca_conf_read(ma->ma_mc, ma->ma_slot, 3);
|
|
pos4 = mca_conf_read(ma->ma_mc, ma->ma_slot, 4);
|
|
if ((pos4 & 0x03) != 0) {
|
|
/* clear the bits 0, 1 */
|
|
mca_conf_write(ma->ma_mc, ma->ma_slot, 4,
|
|
pos4 & ~0x03);
|
|
}
|
|
|
|
pos2 = mca_conf_read(ma->ma_mc, ma->ma_slot, 2);
|
|
if ((pos2 & 0x01) == 0) {
|
|
/* enable the card */
|
|
mca_conf_write(ma->ma_mc, ma->ma_slot, 2, pos2 | 0x01);
|
|
}
|
|
|
|
/* get irq and memory base */
|
|
irq = sknet_mcp_irq[(pos4 & 0x0c) >> 2];
|
|
membase = 0xc0000 + ((pos3 & 0x0f) * 0x4000);
|
|
|
|
/* Get configured media type */
|
|
supmedia = sknet_mcp_media[(pos4 & 0xc0) >> 6];
|
|
break;
|
|
default:
|
|
printf("%s: unknown product %d\n", sc->sc_dev.dv_xname,
|
|
ma->ma_id);
|
|
return;
|
|
}
|
|
|
|
lesc->sc_memt = ma->ma_memt;
|
|
|
|
if (bus_space_map(lesc->sc_memt, membase, LE_MCA_MEMSIZE,
|
|
0, &lesc->sc_memh)) {
|
|
printf("%s: can't map memory\n", sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
|
|
printf(" slot %d irq %d: SKNET %s Ethernet\n",
|
|
ma->ma_slot + 1, irq, typestr);
|
|
|
|
/*
|
|
* Extract the physical MAC address from the ROM.
|
|
*/
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++)
|
|
sc->sc_enaddr[i] = bus_space_read_1(lesc->sc_memt,
|
|
lesc->sc_memh, LE_PROMOFF + i*2);
|
|
|
|
sc->sc_conf3 = LE_C3_ACON;
|
|
sc->sc_addr = 0;
|
|
sc->sc_memsize = LE_MCA_RAMSIZE;
|
|
|
|
sc->sc_copytodesc = le_mca_copytobuf;
|
|
sc->sc_copyfromdesc = le_mca_copyfrombuf;
|
|
sc->sc_copytobuf = le_mca_copytobuf;
|
|
sc->sc_copyfrombuf = le_mca_copyfrombuf;
|
|
sc->sc_zerobuf = le_mca_zerobuf;
|
|
|
|
sc->sc_rdcsr = le_mca_rdcsr;
|
|
sc->sc_wrcsr = le_mca_wrcsr;
|
|
sc->sc_hwinit = NULL;
|
|
|
|
sc->sc_hwreset = le_mca_hwreset;
|
|
|
|
/*
|
|
* This is merely cosmetic since it's not possible to switch
|
|
* the media anyway, even for MC2+.
|
|
*/
|
|
if (supmedia != 0) {
|
|
sc->sc_supmedia = &supmedia;
|
|
sc->sc_nsupmedia = 1;
|
|
sc->sc_defaultmedia = supmedia;
|
|
}
|
|
|
|
lesc->sc_ih = mca_intr_establish(ma->ma_mc, irq, IPL_NET,
|
|
le_mca_intredge, sc);
|
|
if (lesc->sc_ih == NULL) {
|
|
printf("%s: couldn't establish interrupt handler\n",
|
|
sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
|
|
printf("%s", sc->sc_dev.dv_xname);
|
|
am7990_config(&lesc->sc_am7990);
|
|
}
|
|
|
|
/*
|
|
* Controller interrupt.
|
|
*/
|
|
int
|
|
le_mca_intredge(arg)
|
|
void *arg;
|
|
{
|
|
/*
|
|
* We could check the IRQ bit of LE_PORT, but it seems to be unset
|
|
* at this time anyway.
|
|
*/
|
|
|
|
if (am7990_intr(arg) == 0)
|
|
return (0);
|
|
for(;;)
|
|
if (am7990_intr(arg) == 0)
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Push a value to LANCE controller.
|
|
*/
|
|
static __inline void
|
|
le_mca_wrreg(sc, val, type)
|
|
struct le_mca_softc *sc;
|
|
int val, type;
|
|
{
|
|
/*
|
|
* This follows steps in SKNET Personal/MC2+ docs:
|
|
* 1. write reg. number to LANCE register
|
|
* 2. write value RESET | type to port
|
|
* 3. flag REGDO
|
|
* 4. wait until REGREQ is cleared
|
|
*/
|
|
if ((type & REGREAD) == 0)
|
|
bus_space_write_2(sc->sc_memt, sc->sc_memh, LE_LANCEREG, val);
|
|
bus_space_write_1(sc->sc_memt, sc->sc_memh, LE_PORT,
|
|
RESET | type);
|
|
bus_space_write_1(sc->sc_memt, sc->sc_memh, LE_REGIO,
|
|
REGDO);
|
|
/* Delay here doesn't seem to be necessary */
|
|
/* delay(1); */
|
|
while(bus_space_read_1(sc->sc_memt, sc->sc_memh, LE_PORT) & REGREQ)
|
|
;
|
|
}
|
|
|
|
static void
|
|
le_mca_wrcsr(sc, port, val)
|
|
struct lance_softc *sc;
|
|
u_int16_t port, val;
|
|
{
|
|
struct le_mca_softc *lsc = (struct le_mca_softc *)sc;
|
|
|
|
le_mca_set_RAP(lsc, port);
|
|
le_mca_wrreg(lsc, val, RDATA | REGWRITE);
|
|
}
|
|
|
|
static u_int16_t
|
|
le_mca_rdcsr(sc, port)
|
|
struct lance_softc *sc;
|
|
u_int16_t port;
|
|
{
|
|
struct le_mca_softc *lsc = (struct le_mca_softc *)sc;
|
|
|
|
le_mca_set_RAP(lsc, port);
|
|
le_mca_wrreg(lsc, 0, RDATA | REGREAD);
|
|
|
|
return (bus_space_read_2(lsc->sc_memt, lsc->sc_memh, LE_LANCEREG));
|
|
}
|
|
|
|
static void
|
|
le_mca_hwreset(sc)
|
|
struct lance_softc *sc;
|
|
{
|
|
struct le_mca_softc *lsc = (struct le_mca_softc *)sc;
|
|
|
|
bus_space_write_1(lsc->sc_memt, lsc->sc_memh, LE_PORT, 0);
|
|
delay(5); /* Delay >= 5 microseconds */
|
|
bus_space_write_1(lsc->sc_memt, lsc->sc_memh, LE_PORT, RESET);
|
|
}
|
|
|
|
static void
|
|
le_mca_copytobuf(struct lance_softc *sc, void *from, int boff, int len)
|
|
{
|
|
struct le_mca_softc *dsc = (void *) sc;
|
|
|
|
bus_space_write_region_1(dsc->sc_memt, dsc->sc_memh, boff,
|
|
from, len);
|
|
}
|
|
|
|
static void
|
|
le_mca_copyfrombuf(struct lance_softc *sc, void *to, int boff, int len)
|
|
{
|
|
struct le_mca_softc *dsc = (void *) sc;
|
|
|
|
bus_space_read_region_1(dsc->sc_memt, dsc->sc_memh, boff,
|
|
to, len);
|
|
}
|
|
|
|
static void
|
|
le_mca_zerobuf(struct lance_softc *sc, int boff, int len)
|
|
{
|
|
struct le_mca_softc *dsc = (void *) sc;
|
|
|
|
bus_space_set_region_1(dsc->sc_memt, dsc->sc_memh, boff,
|
|
0x00, len);
|
|
}
|