NetBSD/sys/dev/isa/if_ix.c

709 lines
19 KiB
C

/* $NetBSD: if_ix.c,v 1.4 1998/04/15 01:45:44 thorpej Exp $ */
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Rafal K. Boni.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/errno.h>
#include <sys/device.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_types.h>
#include <net/if_media.h>
#include <net/if_ether.h>
#include <vm/vm.h>
#include <machine/cpu.h>
#include <machine/bus.h>
#include <machine/intr.h>
#include <dev/isa/isareg.h>
#include <dev/isa/isavar.h>
#include <dev/ic/i82586reg.h>
#include <dev/ic/i82586var.h>
#include <dev/isa/if_ixreg.h>
#ifdef IX_DEBUG
#define DPRINTF(x) printf x
#else
#define DPRINTF(x)
#endif
int ix_media[] = {
IFM_ETHER | IFM_10_5,
IFM_ETHER | IFM_10_2,
IFM_ETHER | IFM_10_T,
};
#define NIX_MEDIA (sizeof(ix_media) / sizeof(ix_media[0]))
struct ix_softc {
struct ie_softc sc_ie;
bus_space_tag_t sc_regt; /* space tag for registers */
bus_space_handle_t sc_regh; /* space handle for registers */
u_int16_t irq_encoded; /* encoded IRQ */
void *sc_ih; /* interrupt handle */
};
static void ix_reset __P((struct ie_softc *, int));
static void ix_atten __P((struct ie_softc *));
static int ix_intrhook __P((struct ie_softc *, int));
static void ix_copyin __P((struct ie_softc *, void *, int, size_t));
static void ix_copyout __P((struct ie_softc *, const void *, int, size_t));
static u_int16_t ix_read_16 __P((struct ie_softc *, int));
static void ix_write_16 __P((struct ie_softc *, int, u_int16_t));
static void ix_write_24 __P((struct ie_softc *, int, int));
static void ix_mediastatus __P((struct ie_softc *, struct ifmediareq *));
static u_int16_t ix_read_eeprom __P((bus_space_tag_t, bus_space_handle_t, int));
static void ix_eeprom_outbits __P((bus_space_tag_t, bus_space_handle_t, int, int));
static int ix_eeprom_inbits __P((bus_space_tag_t, bus_space_handle_t));
static void ix_eeprom_clock __P((bus_space_tag_t, bus_space_handle_t, int));
#ifdef __BROKEN_INDIRECT_CONFIG
int ix_match __P((struct device *, void*, void *));
#else
int ix_match __P((struct device *, struct cfdata *, void *));
#endif
void ix_attach __P((struct device *, struct device *, void *));
/*
* EtherExpress/16 support routines
*/
static void
ix_reset(sc, why)
struct ie_softc *sc;
int why;
{
struct ix_softc* isc = (struct ix_softc *) sc;
switch (why) {
case CHIP_PROBE:
bus_space_write_1(isc->sc_regt, isc->sc_regh, IX_ECTRL,
IX_RESET_586);
delay(100);
bus_space_write_1(isc->sc_regt, isc->sc_regh, IX_ECTRL, 0);
delay(100);
break;
case CARD_RESET:
break;
}
}
static void
ix_atten(sc)
struct ie_softc *sc;
{
struct ix_softc* isc = (struct ix_softc *) sc;
bus_space_write_1(isc->sc_regt, isc->sc_regh, IX_ATTN, 0);
}
static u_int16_t
ix_read_eeprom(iot, ioh, location)
bus_space_tag_t iot;
bus_space_handle_t ioh;
int location;
{
int ectrl, edata;
ectrl = bus_space_read_1(iot, ioh, IX_ECTRL);
ectrl &= IX_ECTRL_MASK;
ectrl |= IX_ECTRL_EECS;
bus_space_write_1(iot, ioh, IX_ECTRL, ectrl);
ix_eeprom_outbits(iot, ioh, IX_EEPROM_READ, IX_EEPROM_OPSIZE1);
ix_eeprom_outbits(iot, ioh, location, IX_EEPROM_ADDR_SIZE);
edata = ix_eeprom_inbits(iot, ioh);
ectrl = bus_space_read_1(iot, ioh, IX_ECTRL);
ectrl &= ~(IX_RESET_ASIC | IX_ECTRL_EEDI | IX_ECTRL_EECS);
bus_space_write_1(iot, ioh, IX_ECTRL, ectrl);
ix_eeprom_clock(iot, ioh, 1);
ix_eeprom_clock(iot, ioh, 0);
return (edata);
}
static void
ix_eeprom_outbits(iot, ioh, edata, count)
bus_space_tag_t iot;
bus_space_handle_t ioh;
int edata, count;
{
int ectrl, i;
ectrl = bus_space_read_1(iot, ioh, IX_ECTRL);
ectrl &= ~IX_RESET_ASIC;
for (i = count - 1; i >= 0; i--) {
ectrl &= ~IX_ECTRL_EEDI;
if (edata & (1 << i)) {
ectrl |= IX_ECTRL_EEDI;
}
bus_space_write_1(iot, ioh, IX_ECTRL, ectrl);
delay(1); /* eeprom data must be setup for 0.4 uSec */
ix_eeprom_clock(iot, ioh, 1);
ix_eeprom_clock(iot, ioh, 0);
}
ectrl &= ~IX_ECTRL_EEDI;
bus_space_write_1(iot, ioh, IX_ECTRL, ectrl);
delay(1); /* eeprom data must be held for 0.4 uSec */
}
static int
ix_eeprom_inbits(iot, ioh)
bus_space_tag_t iot;
bus_space_handle_t ioh;
{
int ectrl, edata, i;
ectrl = bus_space_read_1(iot, ioh, IX_ECTRL);
ectrl &= ~IX_RESET_ASIC;
for (edata = 0, i = 0; i < 16; i++) {
edata = edata << 1;
ix_eeprom_clock(iot, ioh, 1);
ectrl = bus_space_read_1(iot, ioh, IX_ECTRL);
if (ectrl & IX_ECTRL_EEDO) {
edata |= 1;
}
ix_eeprom_clock(iot, ioh, 0);
}
return (edata);
}
static void
ix_eeprom_clock(iot, ioh, state)
bus_space_tag_t iot;
bus_space_handle_t ioh;
int state;
{
int ectrl;
ectrl = bus_space_read_1(iot, ioh, IX_ECTRL);
ectrl &= ~(IX_RESET_ASIC | IX_ECTRL_EESK);
if (state) {
ectrl |= IX_ECTRL_EESK;
}
bus_space_write_1(iot, ioh, IX_ECTRL, ectrl);
delay(9); /* EESK must be stable for 8.38 uSec */
}
static int
ix_intrhook(sc, where)
struct ie_softc *sc;
int where;
{
struct ix_softc* isc = (struct ix_softc *) sc;
switch (where) {
case INTR_ENTER:
/* entering ISR: disable card interrupts */
bus_space_write_1(isc->sc_regt, isc->sc_regh,
IX_IRQ, isc->irq_encoded);
break;
case INTR_EXIT:
/* exiting ISR: re-enable card interrupts */
bus_space_write_1(isc->sc_regt, isc->sc_regh, IX_IRQ,
isc->irq_encoded | IX_IRQ_ENABLE);
break;
}
return 1;
}
static void
ix_copyin (sc, dst, offset, size)
struct ie_softc *sc;
void *dst;
int offset;
size_t size;
{
int dribble;
u_int8_t* bptr = dst;
bus_space_barrier(sc->bt, sc->bh, offset, size,
BUS_SPACE_BARRIER_READ);
if (offset % 2) {
*bptr = bus_space_read_1(sc->bt, sc->bh, offset);
offset++; bptr++; size--;
}
dribble = size % 2;
bus_space_read_region_2(sc->bt, sc->bh, offset, (u_int16_t *) bptr,
size >> 1);
if (dribble) {
bptr += size - 1;
offset += size - 1;
*bptr = bus_space_read_1(sc->bt, sc->bh, offset);
}
}
static void
ix_copyout (sc, src, offset, size)
struct ie_softc *sc;
const void *src;
int offset;
size_t size;
{
int dribble;
int osize = size;
int ooffset = offset;
const u_int8_t* bptr = src;
if (offset % 2) {
bus_space_write_1(sc->bt, sc->bh, offset, *bptr);
offset++; bptr++; size--;
}
dribble = size % 2;
bus_space_write_region_2(sc->bt, sc->bh, offset, (u_int16_t *)bptr,
size >> 1);
if (dribble) {
bptr += size - 1;
offset += size - 1;
bus_space_write_1(sc->bt, sc->bh, offset, *bptr);
}
bus_space_barrier(sc->bt, sc->bh, ooffset, osize,
BUS_SPACE_BARRIER_WRITE);
}
static u_int16_t
ix_read_16 (sc, offset)
struct ie_softc *sc;
int offset;
{
bus_space_barrier(sc->bt, sc->bh, offset, 2, BUS_SPACE_BARRIER_READ);
return bus_space_read_2(sc->bt, sc->bh, offset);
}
static void
ix_write_16 (sc, offset, value)
struct ie_softc *sc;
int offset;
u_int16_t value;
{
bus_space_write_2(sc->bt, sc->bh, offset, value);
bus_space_barrier(sc->bt, sc->bh, offset, 2, BUS_SPACE_BARRIER_WRITE);
}
static void
ix_write_24 (sc, offset, addr)
struct ie_softc *sc;
int offset, addr;
{
bus_space_write_4(sc->bt, sc->bh, offset, addr +
(u_long) sc->sc_maddr - (u_long) sc->sc_iobase);
bus_space_barrier(sc->bt, sc->bh, offset, 4, BUS_SPACE_BARRIER_WRITE);
}
static void
ix_mediastatus(sc, ifmr)
struct ie_softc *sc;
struct ifmediareq *ifmr;
{
struct ifmedia *ifm = &sc->sc_media;
/*
* The currently selected media is always the active media.
*/
ifmr->ifm_active = ifm->ifm_cur->ifm_media;
}
int
ix_match(parent, cf, aux)
struct device *parent;
#ifdef __BROKEN_INDIRECT_CONFIG
void *cf;
#else
struct cfdata *cf;
#endif
void *aux;
{
int i;
int rv = 0;
bus_addr_t maddr;
bus_size_t msize;
u_short checksum = 0;
bus_space_handle_t ioh;
bus_space_tag_t iot;
u_int8_t val, bart_config;
u_short pg, adjust, decode, edecode;
u_short board_id, id_var1, id_var2, irq, irq_encoded;
struct isa_attach_args * const ia = aux;
short irq_translate[] = {0, 0x09, 0x03, 0x04, 0x05, 0x0a, 0x0b, 0};
iot = ia->ia_iot;
if (bus_space_map(iot, ia->ia_iobase,
IX_IOSIZE, 0, &ioh) != 0) {
DPRINTF(("Can't map io space at 0x%x\n", ia->ia_iobase));
return (0);
}
/* XXX: reset any ee16 at the current iobase */
bus_space_write_1(iot, ioh, IX_ECTRL, IX_RESET_ASIC);
bus_space_write_1(iot, ioh, IX_ECTRL, 0);
delay(240);
/* now look for ee16. */
board_id = id_var1 = id_var2 = 0;
for (i = 0; i < 4 ; i++) {
id_var1 = bus_space_read_1(iot, ioh, IX_ID_PORT);
id_var2 = ((id_var1 & 0x03) << 2);
board_id |= (( id_var1 >> 4) << id_var2);
}
if (board_id != IX_ID) {
DPRINTF(("BART ID mismatch (got 0x%04x, expected 0x%04x)\n",
board_id, IX_ID));
goto out;
}
/*
* The shared RAM size and location of the EE16 is encoded into
* EEPROM location 6. The location of the first set bit tells us
* the memory address (0xc0000 + (0x4000 * FSB)), where FSB is the
* number of the first set bit. The zeroes are then shifted out,
* and the results is the memory size (1 = 16k, 3 = 32k, 7 = 48k,
* 0x0f = 64k).
*
* Examples:
* 0x3c -> 64k@0xc8000, 0x70 -> 48k@0xd0000, 0xc0 -> 32k@0xd8000
* 0x80 -> 16k@0xdc000.
*
* Side note: this comes from reading the old driver rather than
* from a more definitive source, so it could be out-of-whack
* with what the card can do...
*/
val = ix_read_eeprom(iot, ioh, 6) & 0xff;
DPRINTF(("memory config: 0x%02x\n", val));
for(i = 0; i < 8; i++) {
if (val & 1)
break;
val = val >> 1;
}
if (i == 8) {
DPRINTF(("Invalid or unsupported memory config\n"));
goto out;
}
maddr = 0xc0000 + (i * 0x4000);
switch (val) {
case 0x01:
msize = 16 * 1024;
break;
case 0x03:
msize = 32 * 1024;
break;
case 0x07:
msize = 48 * 1024;
break;
case 0x0f:
msize = 64 * 1024;
break;
default:
DPRINTF(("invalid memory size %02x\n", val));
goto out;
}
if (ia->ia_maddr == ISACF_IOMEM_DEFAULT)
ia->ia_maddr = maddr;
else if (ia->ia_maddr != maddr) {
DPRINTF((
"ix_match: memaddr of board @ 0x%x doesn't match config\n",
ia->ia_iobase));
goto out;
}
if (ia->ia_msize == ISACF_IOSIZ_DEFAULT)
ia->ia_msize = msize;
else if (ia->ia_msize != msize) {
DPRINTF((
"ix_match: memsize of board @ 0x%x doesn't match config\n",
ia->ia_iobase));
goto out;
}
DPRINTF(("found %d byte memory region at %x\n",
ia->ia_msize, ia->ia_maddr));
/* need to put the 586 in RESET, and leave it */
bus_space_write_1(iot, ioh, IX_ECTRL, IX_RESET_586);
/* read the eeprom and checksum it, should == IX_ID */
for(i = 0; i < 0x40; i++)
checksum += ix_read_eeprom(iot, ioh, i);
if (checksum != IX_ID) {
DPRINTF(("checksum mismatch (got 0x%04x, expected 0x%04x\n",
checksum, IX_ID));
goto out;
}
/*
* Size and test the memory on the board. The size of the memory
* can be one of 16k, 32k, 48k or 64k. It can be located in the
* address range 0xC0000 to 0xEFFFF on 16k boundaries.
*/
pg = (ia->ia_maddr & 0x3C000) >> 14;
adjust = IX_MCTRL_FMCS16 | (pg & 0x3) << 2;
decode = ((1 << (ia->ia_msize / 16384)) - 1) << pg;
edecode = ((~decode >> 4) & 0xF0) | (decode >> 8);
/* ZZZ This should be checked against eeprom location 6, low byte */
bus_space_write_1(iot, ioh, IX_MEMDEC, decode & 0xFF);
/* ZZZ This should be checked against eeprom location 1, low byte */
bus_space_write_1(iot, ioh, IX_MCTRL, adjust);
/* ZZZ Now if I could find this one I would have it made */
bus_space_write_1(iot, ioh, IX_MPCTRL, (~decode & 0xFF));
/* ZZZ I think this is location 6, high byte */
bus_space_write_1(iot, ioh, IX_MECTRL, edecode); /*XXX disable Exxx */
/*
* Get the encoded interrupt number from the EEPROM, check it
* against the passed in IRQ. Issue a warning if they do not
* match, and fail the probe. If irq is 'IRQUNK' then we
* use the EEPROM irq, and continue.
*/
irq_encoded = ix_read_eeprom(iot, ioh, IX_EEPROM_CONFIG1);
irq_encoded = (irq_encoded & IX_EEPROM_IRQ) >> IX_EEPROM_IRQ_SHIFT;
irq = irq_translate[irq_encoded];
if (ia->ia_irq == ISACF_IRQ_DEFAULT)
ia->ia_irq = irq;
else if (irq != ia->ia_irq) {
DPRINTF(("board IRQ %d does not match config\n", irq));
goto out;
}
/* disable the board interrupts */
bus_space_write_1(iot, ioh, IX_IRQ, irq_encoded);
bart_config = bus_space_read_1(iot, ioh, IX_CONFIG);
bart_config |= IX_BART_LOOPBACK;
bart_config |= IX_BART_MCS16_TEST; /* inb doesn't get bit! */
bus_space_write_1(iot, ioh, IX_CONFIG, bart_config);
bart_config = bus_space_read_1(iot, ioh, IX_CONFIG);
bus_space_write_1(iot, ioh, IX_ECTRL, 0);
delay(100);
rv = 1;
ia->ia_iosize = IX_IOSIZE;
DPRINTF(("ix_match: found board @ 0x%x\n", ia->ia_iobase));
out:
bus_space_unmap(iot, ioh, IX_IOSIZE);
return (rv);
}
void
ix_attach(parent, self, aux)
struct device *parent;
struct device *self;
void *aux;
{
struct ix_softc *isc = (void *)self;
struct ie_softc *sc = &isc->sc_ie;
struct isa_attach_args *ia = aux;
int media;
u_short eaddrtemp;
u_int8_t bart_config;
bus_space_tag_t iot;
bus_space_handle_t ioh, memh;
u_short irq_encoded;
u_int8_t ethaddr[ETHER_ADDR_LEN];
iot = ia->ia_iot;
if (bus_space_map(iot, ia->ia_iobase,
ia->ia_iosize, 0, &ioh) != 0) {
DPRINTF(("\n%s: can't map i/o space 0x%x-0x%x\n",
sc->sc_dev.dv_xname, ia->ia_iobase,
ia->ia_iobase + ia->ia_iosize - 1));
return;
}
if (bus_space_map(ia->ia_memt, ia->ia_maddr,
ia->ia_msize, 0, &memh) != 0) {
DPRINTF(("\n%s: can't map iomem space 0x%x-0x%x\n",
sc->sc_dev.dv_xname, ia->ia_maddr,
ia->ia_maddr + ia->ia_msize - 1));
bus_space_unmap(iot, ioh, ia->ia_iosize);
return;
}
isc->sc_regt = iot;
isc->sc_regh = ioh;
/*
* Get the hardware ethernet address from the EEPROM and
* save it in the softc for use by the 586 setup code.
*/
eaddrtemp = ix_read_eeprom(iot, ioh, IX_EEPROM_ENET_HIGH);
ethaddr[1] = eaddrtemp & 0xFF;
ethaddr[0] = eaddrtemp >> 8;
eaddrtemp = ix_read_eeprom(iot, ioh, IX_EEPROM_ENET_MID);
ethaddr[3] = eaddrtemp & 0xFF;
ethaddr[2] = eaddrtemp >> 8;
eaddrtemp = ix_read_eeprom(iot, ioh, IX_EEPROM_ENET_LOW);
ethaddr[5] = eaddrtemp & 0xFF;
ethaddr[4] = eaddrtemp >> 8;
sc->hwinit = NULL;
sc->hwreset = ix_reset;
sc->chan_attn = ix_atten;
sc->intrhook = ix_intrhook;
sc->memcopyin = ix_copyin;
sc->memcopyout = ix_copyout;
sc->ie_bus_read16 = ix_read_16;
sc->ie_bus_write16 = ix_write_16;
sc->ie_bus_write24 = ix_write_24;
sc->do_xmitnopchain = 0;
sc->sc_mediachange = NULL;
sc->sc_mediastatus = ix_mediastatus;
sc->bt = ia->ia_memt;
sc->bh = memh;
/* Map i/o space. */
sc->sc_msize = ia->ia_msize;
sc->sc_maddr = (void* ) memh;
sc->sc_iobase = sc->sc_maddr + sc->sc_msize - (1 << 24);
/* set up pointers to important on-card control structures */
sc->iscp = 0;
sc->scb = IE_ISCP_SZ;
sc->scp = sc->sc_msize + IE_SCP_ADDR - (1 << 24);
sc->buf_area = sc->scb + IE_SCB_SZ;
sc->buf_area_sz = sc->sc_msize - IE_ISCP_SZ - IE_SCB_SZ - IE_SCP_SZ;
/* zero card memory */
bus_space_set_region_1(sc->bt, sc->bh, 0, 0, 32);
bus_space_set_region_1(sc->bt, sc->bh, 0, 0, sc->sc_msize);
/* set card to 16-bit bus mode */
bus_space_write_1(sc->bt, sc->bh, IE_SCP_BUS_USE((u_long)sc->scp), 0);
/* set up pointers to key structures */
ix_write_24(sc, IE_SCP_ISCP((u_long)sc->scp), (u_long) sc->iscp);
ix_write_16(sc, IE_ISCP_SCB((u_long)sc->iscp), (u_long) sc->scb);
ix_write_24(sc, IE_ISCP_BASE((u_long)sc->iscp), (u_long) sc->iscp);
/* flush setup of pointers, check if chip answers */
bus_space_barrier(sc->bt, sc->bh, 0, sc->sc_msize,
BUS_SPACE_BARRIER_WRITE);
if (!i82586_proberam(sc)) {
DPRINTF(("\n%s: Can't talk to i82586!\n",
sc->sc_dev.dv_xname));
bus_space_unmap(iot, ioh, ia->ia_iosize);
bus_space_unmap(ia->ia_memt, memh, ia->ia_msize);
return;
}
/* Figure out which media is being used... */
if (ix_read_eeprom(iot, ioh, IX_EEPROM_CONFIG1) &
IX_EEPROM_MEDIA_EXT) {
if (ix_read_eeprom(iot, ioh, IX_EEPROM_MEDIA) &
IX_EEPROM_MEDIA_TP)
media = IFM_ETHER | IFM_10_T;
else
media = IFM_ETHER | IFM_10_2;
} else
media = IFM_ETHER | IFM_10_5;
/* Take the card out of lookback */
bart_config = bus_space_read_1(iot, ioh, IX_CONFIG);
bart_config &= ~IX_BART_LOOPBACK;
bart_config |= IX_BART_MCS16_TEST; /* inb doesn't get bit! */
bus_space_write_1(iot, ioh, IX_CONFIG, bart_config);
bart_config = bus_space_read_1(iot, ioh, IX_CONFIG);
irq_encoded = ix_read_eeprom(iot, ioh,
IX_EEPROM_CONFIG1);
irq_encoded = (irq_encoded & IX_EEPROM_IRQ) >> IX_EEPROM_IRQ_SHIFT;
/* Enable interrupts */
bus_space_write_1(iot, ioh, IX_IRQ,
irq_encoded | IX_IRQ_ENABLE);
isc->irq_encoded = irq_encoded;
i82586_attach(sc, "EtherExpress/16", ethaddr,
ix_media, NIX_MEDIA, media);
isc->sc_ih = isa_intr_establish(ia->ia_ic, ia->ia_irq, IST_EDGE,
IPL_NET, i82586_intr, sc);
if (isc->sc_ih == NULL)
DPRINTF(("\n%s: can't establish interrupt\n",
sc->sc_dev.dv_xname));
}
struct cfattach ix_ca = {
sizeof(struct ix_softc), ix_match, ix_attach
};