NetBSD/libexec/bootpd/bootptab.mcs

94 lines
2.5 KiB
Plaintext

# /etc/bootptab: database for bootp server (/etc/bootpd)
# Last update: gwr, Sun Dec 12 19:00:00 EDT 1993
# Blank lines and lines beginning with '#' are ignored.
#
# Legend: (see bootptab.5)
# first field -- hostname (not indented)
# bf -- bootfile
# bs -- bootfile size in 512-octet blocks
# cs -- cookie servers
# df -- dump file name
# dn -- domain name
# ds -- domain name servers
# ef -- extension file
# gw -- gateways
# ha -- hardware address
# hd -- home directory for bootfiles
# hn -- host name set for client
# ht -- hardware type
# im -- impress servers
# ip -- host IP address
# lg -- log servers
# lp -- LPR servers
# ns -- IEN-116 name servers
# ra -- reply address
# rl -- resource location protocol servers
# rp -- root path
# sa -- boot server address
# sm -- subnet mask
# sw -- swap server
# tc -- template host (points to similar host entry)
# td -- TFTP directory
# to -- time offset (seconds)
# ts -- time servers
# vm -- vendor magic number
# Tn -- generic option tag n
#
# Be careful about including backslashes where they're needed. Weird (bad)
# things can happen when a backslash is omitted where one is intended.
# Also, note that generic option data must be either a string or a
# sequence of bytes where each byte is a two-digit hex value.
# First, we define a global entry which specifies the stuff every host uses.
# If you leave "td" and "hd" unset, run bootpd with the "-c /tftpboot"
# switch so path names (boot files) will be interpreted relative to
# the same directory as tftpd will use as its CWD.
.default:\
:hn:dn="mc.com":\
:td=/tftpboot:\
:ds=merlin, jericho:\
:to=auto:
# Next, we can define different master entries for each subnet. . .
.subnet16:\
:tc=.default:\
:sm=255.255.255.0:\
:gw=merlin:\
:sa=merlin:
.subnet17:\
:tc=.default:\
:sm=255.255.255.0:\
:gw=merlin-gw:\
:sa=merlin-gw:
#
# We should be able to use as many levels of indirection as desired. Use
# your imagination. . .
#
# Individual entries (could also have different servers for some/all of these
# hosts, but we don't really use this feature at CMU):
# Emulex terminal server
emulex: tc=.subnet16:ha=00.00.C9.00.42.E0:bf=P4KTL0E:
# Lantronix eps1
eps1: tc=.subnet16:ha=00.80.A3.04.1D.78:
# Tadpole 885 board.
tp885: tc=.subnet17:ha=08.00.4C.00.2F.74:bf=tp885sys2.cfe:
# MVME147 VxWorks board.
mvme147:tc=.subnet17:ha=08.00.3e.20.da.47:bf=mv147vxw.st:
# These are just for testing
walnut:tc=.subnet16:ha=walnut:sa=merlin-gw:\
:td@:hd=/export/walnut/:
banana:tc=.subnet17:ha=banana:bf=boot.sun4c:
thor:tc=.subnet17:ha=thor:bf=boot.sun4e: