Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
11da32b13c
NetBSD/sys/dev/isa/wds.c
thorpej 8abe76d2f0 Add offset and length parameters to bus_dmamap_sync(), used for specifiying 
partial syncs of a DMA mapping.
1998-02-04 05:12:46 +00:00

1568 lines
37 KiB
C
Raw Blame History

/* $NetBSD: wds.c,v 1.30 1998/02/04 05:14:36 thorpej Exp $ */
#undef WDSDIAG
#ifdef DDB
#define integrate
#else
#define integrate static inline
#endif
/*
* XXX
* sense data
* aborts
* resets
*/
/*-
* Copyright (c) 1997, 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1994, 1995 Julian Highfield. All rights reserved.
* Portions copyright (c) 1994, 1996, 1997
* Charles M. Hannum. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Julian Highfield.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* This driver is for the WD7000 family of SCSI controllers:
* the WD7000-ASC, a bus-mastering DMA controller,
* the WD7000-FASST2, an -ASC with new firmware and scatter-gather,
* and the WD7000-ASE, which was custom manufactured for Apollo
* workstations and seems to include an -ASC as well as floppy
* and ESDI interfaces.
*
* Loosely based on Theo Deraadt's unfinished attempt.
*/
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/errno.h>
#include <sys/ioctl.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <sys/user.h>
#include <machine/bus.h>
#include <machine/intr.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <dev/isa/isavar.h>
#include <dev/isa/isadmavar.h>
#include <dev/isa/wdsreg.h>
#define WDS_ISA_IOSIZE 8
#ifndef DDB
#define Debugger() panic("should call debugger here (wds.c)")
#endif /* ! DDB */
#define WDS_MAXXFER ((WDS_NSEG - 1) << PGSHIFT)
#define WDS_MBX_SIZE 16
#define WDS_SCB_MAX 32
#define SCB_HASH_SIZE 32 /* hash table size for phystokv */
#define SCB_HASH_SHIFT 9
#define SCB_HASH(x) ((((long)(x))>>SCB_HASH_SHIFT) & (SCB_HASH_SIZE - 1))
#define wds_nextmbx(wmb, mbx, mbio) \
if ((wmb) == &(mbx)->mbio[WDS_MBX_SIZE - 1]) \
(wmb) = &(mbx)->mbio[0]; \
else \
(wmb)++;
struct wds_mbx {
struct wds_mbx_out mbo[WDS_MBX_SIZE];
struct wds_mbx_in mbi[WDS_MBX_SIZE];
struct wds_mbx_out *cmbo; /* Collection Mail Box out */
struct wds_mbx_out *tmbo; /* Target Mail Box out */
struct wds_mbx_in *tmbi; /* Target Mail Box in */
};
struct wds_softc {
struct device sc_dev;
bus_space_tag_t sc_iot;
bus_space_handle_t sc_ioh;
bus_dma_tag_t sc_dmat;
bus_dmamap_t sc_dmamap_mbox; /* maps the mailbox */
void *sc_ih;
struct wds_mbx *sc_mbx;
#define wmbx (sc->sc_mbx)
struct wds_scb *sc_scbhash[SCB_HASH_SIZE];
TAILQ_HEAD(, wds_scb) sc_free_scb, sc_waiting_scb;
int sc_numscbs, sc_mbofull;
struct scsipi_link sc_link; /* prototype for subdevs */
LIST_HEAD(, scsipi_xfer) sc_queue;
struct scsipi_xfer *sc_queuelast;
int sc_revision;
int sc_maxsegs;
};
struct wds_probe_data {
#ifdef notyet
int sc_irq, sc_drq;
#endif
int sc_scsi_dev;
};
integrate void
wds_wait __P((bus_space_tag_t, bus_space_handle_t, int, int, int));
int wds_cmd __P((bus_space_tag_t, bus_space_handle_t, u_char *, int));
integrate void wds_finish_scbs __P((struct wds_softc *));
int wdsintr __P((void *));
integrate void wds_reset_scb __P((struct wds_softc *, struct wds_scb *));
void wds_free_scb __P((struct wds_softc *, struct wds_scb *));
integrate int wds_init_scb __P((struct wds_softc *, struct wds_scb *));
struct wds_scb *wds_get_scb __P((struct wds_softc *, int));
struct wds_scb *wds_scb_phys_kv __P((struct wds_softc *, u_long));
void wds_queue_scb __P((struct wds_softc *, struct wds_scb *));
void wds_collect_mbo __P((struct wds_softc *));
void wds_start_scbs __P((struct wds_softc *));
void wds_done __P((struct wds_softc *, struct wds_scb *, u_char));
int wds_find __P((bus_space_tag_t, bus_space_handle_t, struct wds_probe_data *));
void wds_attach __P((struct wds_softc *, struct wds_probe_data *));
void wds_init __P((struct wds_softc *, int));
void wds_inquire_setup_information __P((struct wds_softc *));
void wdsminphys __P((struct buf *));
int wds_scsi_cmd __P((struct scsipi_xfer *));
void wds_sense __P((struct wds_softc *, struct wds_scb *));
int wds_poll __P((struct wds_softc *, struct scsipi_xfer *, int));
int wds_ipoll __P((struct wds_softc *, struct wds_scb *, int));
void wds_timeout __P((void *));
int wds_create_scbs __P((struct wds_softc *, void *, size_t));
void wds_enqueue __P((struct wds_softc *, struct scsipi_xfer *, int));
struct scsipi_xfer *wds_dequeue __P((struct wds_softc *));
struct scsipi_adapter wds_switch = {
wds_scsi_cmd,
wdsminphys,
0,
0,
};
/* the below structure is so we have a default dev struct for our link struct */
struct scsipi_device wds_dev = {
NULL, /* Use default error handler */
NULL, /* have a queue, served by this */
NULL, /* have no async handler */
NULL, /* Use default 'done' routine */
};
#ifdef __BROKEN_INDIRECT_CONFIG
int wdsprobe __P((struct device *, void *, void *));
#else
int wdsprobe __P((struct device *, struct cfdata *, void *));
#endif
void wdsattach __P((struct device *, struct device *, void *));
struct cfattach wds_ca = {
sizeof(struct wds_softc), wdsprobe, wdsattach
};
#define WDS_ABORT_TIMEOUT 2000 /* time to wait for abort (mSec) */
/*
* Insert a scsipi_xfer into the software queue. We overload xs->free_list
* to avoid having to allocate additional resources (since we're used
* only during resource shortages anyhow.
*/
void
wds_enqueue(sc, xs, infront)
struct wds_softc *sc;
struct scsipi_xfer *xs;
int infront;
{
if (infront || sc->sc_queue.lh_first == NULL) {
if (sc->sc_queue.lh_first == NULL)
sc->sc_queuelast = xs;
LIST_INSERT_HEAD(&sc->sc_queue, xs, free_list);
return;
}
LIST_INSERT_AFTER(sc->sc_queuelast, xs, free_list);
sc->sc_queuelast = xs;
}
/*
* Pull a scsipi_xfer off the front of the software queue.
*/
struct scsipi_xfer *
wds_dequeue(sc)
struct wds_softc *sc;
{
struct scsipi_xfer *xs;
xs = sc->sc_queue.lh_first;
LIST_REMOVE(xs, free_list);
if (sc->sc_queue.lh_first == NULL)
sc->sc_queuelast = NULL;
return (xs);
}
integrate void
wds_wait(iot, ioh, port, mask, val)
bus_space_tag_t iot;
bus_space_handle_t ioh;
int port;
int mask, val;
{
while ((bus_space_read_1(iot, ioh, port) & mask) != val)
;
}
/*
* Write a command to the board's I/O ports.
*/
int
wds_cmd(iot, ioh, ibuf, icnt)
bus_space_tag_t iot;
bus_space_handle_t ioh;
u_char *ibuf;
int icnt;
{
u_char c;
wds_wait(iot, ioh, WDS_STAT, WDSS_RDY, WDSS_RDY);
while (icnt--) {
bus_space_write_1(iot, ioh, WDS_CMD, *ibuf++);
wds_wait(iot, ioh, WDS_STAT, WDSS_RDY, WDSS_RDY);
c = bus_space_read_1(iot, ioh, WDS_STAT);
if (c & WDSS_REJ)
return 1;
}
return 0;
}
/*
* Check for the presence of a WD7000 SCSI controller.
*/
int
wdsprobe(parent, match, aux)
struct device *parent;
#ifdef __BROKEN_INDIRECT_CONFIG
void *match;
#else
struct cfdata *match;
#endif
void *aux;
{
struct isa_attach_args *ia = aux;
bus_space_tag_t iot = ia->ia_iot;
bus_space_handle_t ioh;
struct wds_probe_data wpd;
int rv;
/* Disallow wildcarded i/o address. */
if (ia->ia_iobase == ISACF_PORT_DEFAULT)
return (0);
if (bus_space_map(iot, ia->ia_iobase, WDS_ISA_IOSIZE, 0, &ioh))
return (0);
rv = wds_find(iot, ioh, &wpd);
bus_space_unmap(iot, ioh, WDS_ISA_IOSIZE);
if (rv) {
#ifdef notyet
if (ia->ia_irq != -1 && ia->ia_irq != wpd.sc_irq)
return (0);
if (ia->ia_drq != -1 && ia->ia_drq != wpd.sc_drq)
return (0);
ia->ia_irq = wpd.sc_irq;
ia->ia_drq = wpd.sc_drq;
#else
if (ia->ia_irq == -1)
return (0);
if (ia->ia_drq == -1)
return (0);
#endif
ia->ia_msize = 0;
ia->ia_iosize = WDS_ISA_IOSIZE;
}
return (rv);
}
/*
* Attach all available units.
*/
void
wdsattach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct isa_attach_args *ia = aux;
struct wds_softc *sc = (void *)self;
bus_space_tag_t iot = ia->ia_iot;
bus_space_handle_t ioh;
struct wds_probe_data wpd;
isa_chipset_tag_t ic = ia->ia_ic;
printf("\n");
if (bus_space_map(iot, ia->ia_iobase, WDS_ISA_IOSIZE, 0, &ioh)) {
printf("%s: can't map i/o space\n", sc->sc_dev.dv_xname);
return;
}
sc->sc_iot = iot;
sc->sc_ioh = ioh;
sc->sc_dmat = ia->ia_dmat;
if (!wds_find(iot, ioh, &wpd)) {
printf("%s: wds_find failed\n", sc->sc_dev.dv_xname);
return;
}
bus_space_write_1(iot, ioh, WDS_HCR, WDSH_DRQEN);
#ifdef notyet
if (wpd.sc_drq != -1)
isa_dmacascade(parent, wpd.sc_drq);
sc->sc_ih = isa_intr_establish(ic, wpd.sc_irq, IST_EDGE, IPL_BIO,
wdsintr, sc);
#else
if (ia->ia_drq != -1)
isa_dmacascade(parent, ia->ia_drq);
sc->sc_ih = isa_intr_establish(ic, ia->ia_irq, IST_EDGE, IPL_BIO,
wdsintr, sc);
#endif
if (sc->sc_ih == NULL) {
printf("%s: couldn't establish interrupt\n",
sc->sc_dev.dv_xname);
return;
}
wds_attach(sc, &wpd);
}
void
wds_attach(sc, wpd)
struct wds_softc *sc;
struct wds_probe_data *wpd;
{
TAILQ_INIT(&sc->sc_free_scb);
TAILQ_INIT(&sc->sc_waiting_scb);
LIST_INIT(&sc->sc_queue);
wds_init(sc, 0);
wds_inquire_setup_information(sc);
/*
* fill in the prototype scsipi_link.
*/
sc->sc_link.scsipi_scsi.channel = SCSI_CHANNEL_ONLY_ONE;
sc->sc_link.adapter_softc = sc;
sc->sc_link.scsipi_scsi.adapter_target = wpd->sc_scsi_dev;
sc->sc_link.adapter = &wds_switch;
sc->sc_link.device = &wds_dev;
/* XXX */
/* I don't think the -ASE can handle openings > 1. */
/* It gives Vendor Error 26 whenever I try it. */
sc->sc_link.openings = 1;
sc->sc_link.scsipi_scsi.max_target = 7;
sc->sc_link.type = BUS_SCSI;
/*
* ask the adapter what subunits are present
*/
config_found(&sc->sc_dev, &sc->sc_link, scsiprint);
}
integrate void
wds_finish_scbs(sc)
struct wds_softc *sc;
{
struct wds_mbx_in *wmbi;
struct wds_scb *scb;
int i;
wmbi = wmbx->tmbi;
if (wmbi->stat == WDS_MBI_FREE) {
for (i = 0; i < WDS_MBX_SIZE; i++) {
if (wmbi->stat != WDS_MBI_FREE) {
printf("%s: mbi not in round-robin order\n",
sc->sc_dev.dv_xname);
goto AGAIN;
}
wds_nextmbx(wmbi, wmbx, mbi);
}
#ifdef WDSDIAGnot
printf("%s: mbi interrupt with no full mailboxes\n",
sc->sc_dev.dv_xname);
#endif
return;
}
AGAIN:
do {
scb = wds_scb_phys_kv(sc, phystol(wmbi->scb_addr));
if (!scb) {
printf("%s: bad mbi scb pointer; skipping\n",
sc->sc_dev.dv_xname);
goto next;
}
#ifdef WDSDEBUG
if (wds_debug) {
u_char *cp = &scb->scsipi_cmd;
printf("op=%x %x %x %x %x %x\n",
cp[0], cp[1], cp[2], cp[3], cp[4], cp[5]);
printf("stat %x for mbi addr = 0x%08x, ",
wmbi->stat, wmbi);
printf("scb addr = 0x%x\n", scb);
}
#endif /* WDSDEBUG */
untimeout(wds_timeout, scb);
wds_done(sc, scb, wmbi->stat);
next:
wmbi->stat = WDS_MBI_FREE;
wds_nextmbx(wmbi, wmbx, mbi);
} while (wmbi->stat != WDS_MBI_FREE);
wmbx->tmbi = wmbi;
}
/*
* Process an interrupt.
*/
int
wdsintr(arg)
void *arg;
{
struct wds_softc *sc = arg;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
u_char c;
/* Was it really an interrupt from the board? */
if ((bus_space_read_1(iot, ioh, WDS_STAT) & WDSS_IRQ) == 0)
return 0;
/* Get the interrupt status byte. */
c = bus_space_read_1(iot, ioh, WDS_IRQSTAT) & WDSI_MASK;
/* Acknowledge (which resets) the interrupt. */
bus_space_write_1(iot, ioh, WDS_IRQACK, 0x00);
switch (c) {
case WDSI_MSVC:
wds_finish_scbs(sc);
break;
case WDSI_MFREE:
wds_start_scbs(sc);
break;
default:
printf("%s: unrecognized interrupt type %02x",
sc->sc_dev.dv_xname, c);
break;
}
return 1;
}
integrate void
wds_reset_scb(sc, scb)
struct wds_softc *sc;
struct wds_scb *scb;
{
scb->flags = 0;
}
/*
* Free the command structure, the outgoing mailbox and the data buffer.
*/
void
wds_free_scb(sc, scb)
struct wds_softc *sc;
struct wds_scb *scb;
{
int s;
s = splbio();
wds_reset_scb(sc, scb);
TAILQ_INSERT_HEAD(&sc->sc_free_scb, scb, chain);
/*
* If there were none, wake anybody waiting for one to come free,
* starting with queued entries.
*/
if (scb->chain.tqe_next == 0)
wakeup(&sc->sc_free_scb);
splx(s);
}
integrate int
wds_init_scb(sc, scb)
struct wds_softc *sc;
struct wds_scb *scb;
{
bus_dma_tag_t dmat = sc->sc_dmat;
int hashnum, error;
/*
* XXX Should we put a DIAGNOSTIC check for multiple
* XXX SCB inits here?
*/
bzero(scb, sizeof(struct wds_scb));
/*
* Create DMA maps for this SCB.
*/
error = bus_dmamap_create(dmat, sizeof(struct wds_scb), 1,
sizeof(struct wds_scb), 0, BUS_DMA_NOWAIT, &scb->dmamap_self);
if (error) {
printf("%s: can't create scb dmamap_self\n",
sc->sc_dev.dv_xname);
return (error);
}
error = bus_dmamap_create(dmat, WDS_MAXXFER, WDS_NSEG, WDS_MAXXFER,
0, BUS_DMA_NOWAIT|BUS_DMA_ALLOCNOW, &scb->dmamap_xfer);
if (error) {
printf("%s: can't create scb dmamap_xfer\n",
sc->sc_dev.dv_xname);
bus_dmamap_destroy(dmat, scb->dmamap_self);
return (error);
}
/*
* Load the permanent DMA maps.
*/
error = bus_dmamap_load(dmat, scb->dmamap_self, scb,
sizeof(struct wds_scb), NULL, BUS_DMA_NOWAIT);
if (error) {
printf("%s: can't load scb dmamap_self\n",
sc->sc_dev.dv_xname);
bus_dmamap_destroy(dmat, scb->dmamap_self);
bus_dmamap_destroy(dmat, scb->dmamap_xfer);
return (error);
}
/*
* put in the phystokv hash table
* Never gets taken out.
*/
scb->hashkey = scb->dmamap_self->dm_segs[0].ds_addr;
hashnum = SCB_HASH(scb->hashkey);
scb->nexthash = sc->sc_scbhash[hashnum];
sc->sc_scbhash[hashnum] = scb;
wds_reset_scb(sc, scb);
return (0);
}
/*
* Create a set of scbs and add them to the free list.
*/
int
wds_create_scbs(sc, mem, size)
struct wds_softc *sc;
void *mem;
size_t size;
{
bus_dma_segment_t seg;
struct wds_scb *scb;
int rseg, error;
if (sc->sc_numscbs >= WDS_SCB_MAX)
return (0);
if ((scb = mem) != NULL)
goto have_mem;
size = NBPG;
error = bus_dmamem_alloc(sc->sc_dmat, size, NBPG, 0, &seg, 1, &rseg,
BUS_DMA_NOWAIT);
if (error) {
printf("%s: can't allocate memory for scbs\n",
sc->sc_dev.dv_xname);
return (error);
}
error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, size,
(caddr_t *)&scb, BUS_DMA_NOWAIT|BUS_DMA_COHERENT);
if (error) {
printf("%s: can't map memory for scbs\n",
sc->sc_dev.dv_xname);
bus_dmamem_free(sc->sc_dmat, &seg, rseg);
return (error);
}
have_mem:
bzero(scb, size);
while (size > sizeof(struct wds_scb) && sc->sc_numscbs < WDS_SCB_MAX) {
error = wds_init_scb(sc, scb);
if (error) {
printf("%s: can't initialize scb\n",
sc->sc_dev.dv_xname);
return (error);
}
TAILQ_INSERT_TAIL(&sc->sc_free_scb, scb, chain);
(caddr_t)scb += ALIGN(sizeof(struct wds_scb));
size -= ALIGN(sizeof(struct wds_scb));
sc->sc_numscbs++;
}
return (0);
}
/*
* Get a free scb
*
* If there are none, see if we can allocate a new one. If so, put it in
* the hash table too otherwise either return an error or sleep.
*/
struct wds_scb *
wds_get_scb(sc, flags)
struct wds_softc *sc;
int flags;
{
struct wds_scb *scb;
int s;
s = splbio();
/*
* If we can and have to, sleep waiting for one to come free
* but only if we can't allocate a new one.
*/
for (;;) {
scb = sc->sc_free_scb.tqh_first;
if (scb) {
TAILQ_REMOVE(&sc->sc_free_scb, scb, chain);
break;
}
if (sc->sc_numscbs < WDS_SCB_MAX) {
/*
* wds_create_scbs() might have managed to create
* one before it failed. If so, don't abort,
* just grab it and continue to hobble along.
*/
if (wds_create_scbs(sc, NULL, 0) != 0 &&
sc->sc_free_scb.tqh_first == NULL) {
printf("%s: can't allocate scbs\n",
sc->sc_dev.dv_xname);
goto out;
}
continue;
}
if ((flags & SCSI_NOSLEEP) != 0)
goto out;
tsleep(&sc->sc_free_scb, PRIBIO, "wdsscb", 0);
}
scb->flags |= SCB_ALLOC;
out:
splx(s);
return (scb);
}
struct wds_scb *
wds_scb_phys_kv(sc, scb_phys)
struct wds_softc *sc;
u_long scb_phys;
{
int hashnum = SCB_HASH(scb_phys);
struct wds_scb *scb = sc->sc_scbhash[hashnum];
while (scb) {
if (scb->hashkey == scb_phys)
break;
/* XXX Check to see if it matches the sense command block. */
if (scb->hashkey == (scb_phys - sizeof(struct wds_cmd)))
break;
scb = scb->nexthash;
}
return (scb);
}
/*
* Queue a SCB to be sent to the controller, and send it if possible.
*/
void
wds_queue_scb(sc, scb)
struct wds_softc *sc;
struct wds_scb *scb;
{
TAILQ_INSERT_TAIL(&sc->sc_waiting_scb, scb, chain);
wds_start_scbs(sc);
}
/*
* Garbage collect mailboxes that are no longer in use.
*/
void
wds_collect_mbo(sc)
struct wds_softc *sc;
{
struct wds_mbx_out *wmbo; /* Mail Box Out pointer */
#ifdef WDSDIAG
struct wds_scb *scb;
#endif
wmbo = wmbx->cmbo;
while (sc->sc_mbofull > 0) {
if (wmbo->cmd != WDS_MBO_FREE)
break;
#ifdef WDSDIAG
scb = wds_scb_phys_kv(sc, phystol(wmbo->scb_addr));
scb->flags &= ~SCB_SENDING;
#endif
--sc->sc_mbofull;
wds_nextmbx(wmbo, wmbx, mbo);
}
wmbx->cmbo = wmbo;
}
/*
* Send as many SCBs as we have empty mailboxes for.
*/
void
wds_start_scbs(sc)
struct wds_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct wds_mbx_out *wmbo; /* Mail Box Out pointer */
struct wds_scb *scb;
u_char c;
wmbo = wmbx->tmbo;
while ((scb = sc->sc_waiting_scb.tqh_first) != NULL) {
if (sc->sc_mbofull >= WDS_MBX_SIZE) {
wds_collect_mbo(sc);
if (sc->sc_mbofull >= WDS_MBX_SIZE) {
c = WDSC_IRQMFREE;
wds_cmd(iot, ioh, &c, sizeof c);
break;
}
}
TAILQ_REMOVE(&sc->sc_waiting_scb, scb, chain);
#ifdef WDSDIAG
scb->flags |= SCB_SENDING;
#endif
/* Link scb to mbo. */
if (scb->flags & SCB_SENSE)
ltophys(scb->dmamap_self->dm_segs[0].ds_addr +
offsetof(struct wds_scb, sense), wmbo->scb_addr);
else
ltophys(scb->dmamap_self->dm_segs[0].ds_addr +
offsetof(struct wds_scb, cmd), wmbo->scb_addr);
/* XXX What about aborts? */
wmbo->cmd = WDS_MBO_START;
/* Tell the card to poll immediately. */
c = WDSC_MSTART(wmbo - wmbx->mbo);
wds_cmd(sc->sc_iot, sc->sc_ioh, &c, sizeof c);
if ((scb->flags & SCB_POLLED) == 0)
timeout(wds_timeout, scb, (scb->timeout * hz) / 1000);
++sc->sc_mbofull;
wds_nextmbx(wmbo, wmbx, mbo);
}
wmbx->tmbo = wmbo;
}
/*
* Process the result of a SCSI command.
*/
void
wds_done(sc, scb, stat)
struct wds_softc *sc;
struct wds_scb *scb;
u_char stat;
{
bus_dma_tag_t dmat = sc->sc_dmat;
struct scsipi_xfer *xs = scb->xs;
/* XXXXX */
/* Don't release the SCB if it was an internal command. */
if (xs == 0) {
scb->flags |= SCB_DONE;
return;
}
/* Sense handling. */
if (xs->error == XS_SENSE) {
bcopy(&scb->sense_data, &xs->sense.scsi_sense,
sizeof (struct scsipi_sense_data));
} else {
/*
* If we were a data transfer, unload the map that described
* the data buffer.
*/
if (xs->datalen) {
bus_dmamap_sync(dmat, scb->dmamap_xfer, 0,
scb->dmamap_xfer->dm_mapsize,
(xs->flags & SCSI_DATA_IN) ? BUS_DMASYNC_POSTREAD :
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(dmat, scb->dmamap_xfer);
}
if (xs->error == XS_NOERROR) {
/* If all went well, or an error is acceptable. */
if (stat == WDS_MBI_OK) {
/* OK, set the result */
xs->resid = 0;
} else {
/* Check the mailbox status. */
switch (stat) {
case WDS_MBI_OKERR:
/*
* SCSI error recorded in scb,
* counts as WDS_MBI_OK
*/
switch (scb->cmd.venderr) {
case 0x00:
printf("%s: Is this "
"an error?\n",
sc->sc_dev.dv_xname);
/* Experiment. */
xs->error = XS_DRIVER_STUFFUP;
break;
case 0x01:
#if 0
printf("%s: OK, see SCSI "
"error field.\n",
sc->sc_dev.dv_xname);
#endif
if (scb->cmd.stat ==
SCSI_CHECK) {
/* Do sense. */
wds_sense(sc, scb);
return;
} else if (scb->cmd.stat ==
SCSI_BUSY) {
xs->error = XS_BUSY;
}
break;
case 0x40:
#if 0
printf("%s: DMA underrun!\n",
sc->sc_dev.dv_xname);
#endif
/*
* Hits this if the target
* returns fewer that datalen
* bytes (eg my CD-ROM, which
* returns a short version
* string, or if DMA is
* turned off etc.
*/
xs->resid = 0;
break;
default:
printf("%s: VENDOR ERROR "
"%02x, scsi %02x\n",
sc->sc_dev.dv_xname,
scb->cmd.venderr,
scb->cmd.stat);
/* Experiment. */
xs->error = XS_DRIVER_STUFFUP;
break;
}
break;
case WDS_MBI_ETIME:
/*
* The documentation isn't clear on
* what conditions might generate this,
* but selection timeouts are the only
* one I can think of.
*/
xs->error = XS_SELTIMEOUT;
break;
case WDS_MBI_ERESET:
case WDS_MBI_ETARCMD:
case WDS_MBI_ERESEL:
case WDS_MBI_ESEL:
case WDS_MBI_EABORT:
case WDS_MBI_ESRESET:
case WDS_MBI_EHRESET:
xs->error = XS_DRIVER_STUFFUP;
break;
}
}
} /* else sense */
} /* XS_NOERROR */
wds_free_scb(sc, scb);
xs->flags |= ITSDONE;
scsipi_done(xs);
/*
* If there are queue entries in the software queue, try to
* run the first one. We should be more or less guaranteed
* to succeed, since we just freed a CCB.
*
* NOTE: wds_scsi_cmd() relies on our calling it with
* the first entry in the queue.
*/
if ((xs = sc->sc_queue.lh_first) != NULL)
(void) wds_scsi_cmd(xs);
}
int
wds_find(iot, ioh, sc)
bus_space_tag_t iot;
bus_space_handle_t ioh;
struct wds_probe_data *sc;
{
int i;
/* XXXXX */
/*
* Sending a command causes the CMDRDY bit to clear.
*/
for (i = 5; i; i--) {
if ((bus_space_read_1(iot, ioh, WDS_STAT) & WDSS_RDY) != 0)
break;
delay(100);
}
if (!i)
return 0;
bus_space_write_1(iot, ioh, WDS_CMD, WDSC_NOOP);
if ((bus_space_read_1(iot, ioh, WDS_STAT) & WDSS_RDY) != 0)
return 0;
bus_space_write_1(iot, ioh, WDS_HCR, WDSH_SCSIRESET|WDSH_ASCRESET);
delay(10000);
bus_space_write_1(iot, ioh, WDS_HCR, 0x00);
delay(500000);
wds_wait(iot, ioh, WDS_STAT, WDSS_RDY, WDSS_RDY);
if (bus_space_read_1(iot, ioh, WDS_IRQSTAT) != 1)
if (bus_space_read_1(iot, ioh, WDS_IRQSTAT) != 7)
return 0;
for (i = 2000; i; i--) {
if ((bus_space_read_1(iot, ioh, WDS_STAT) & WDSS_RDY) != 0)
break;
delay(100);
}
if (!i)
return 0;
if (sc) {
#ifdef notyet
sc->sc_irq = ...;
sc->sc_drq = ...;
#endif
/* XXX Can we do this better? */
sc->sc_scsi_dev = 7;
}
return 1;
}
/*
* Initialise the board and driver.
*/
void
wds_init(sc, isreset)
struct wds_softc *sc;
int isreset;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
bus_dma_segment_t seg;
struct wds_setup init;
u_char c;
int i, rseg;
if (isreset)
goto doinit;
/*
* Allocate the mailbox.
*/
if (bus_dmamem_alloc(sc->sc_dmat, NBPG, NBPG, 0, &seg, 1,
&rseg, BUS_DMA_NOWAIT) ||
bus_dmamem_map(sc->sc_dmat, &seg, rseg, NBPG,
(caddr_t *)&wmbx, BUS_DMA_NOWAIT|BUS_DMA_COHERENT))
panic("wds_init: can't create or map mailbox");
/*
* Since DMA memory allocation is always rounded up to a
* page size, create some scbs from the leftovers.
*/
if (wds_create_scbs(sc, ((caddr_t)wmbx) +
ALIGN(sizeof(struct wds_mbx)),
NBPG - ALIGN(sizeof(struct wds_mbx))))
panic("wds_init: can't create scbs");
/*
* Create and load the mailbox DMA map.
*/
if (bus_dmamap_create(sc->sc_dmat, sizeof(struct wds_mbx), 1,
sizeof(struct wds_mbx), 0, BUS_DMA_NOWAIT, &sc->sc_dmamap_mbox) ||
bus_dmamap_load(sc->sc_dmat, sc->sc_dmamap_mbox, wmbx,
sizeof(struct wds_mbx), NULL, BUS_DMA_NOWAIT))
panic("wds_ionit: can't craete or load mailbox dma map");
doinit:
/*
* Set up initial mail box for round-robin operation.
*/
for (i = 0; i < WDS_MBX_SIZE; i++) {
wmbx->mbo[i].cmd = WDS_MBO_FREE;
wmbx->mbi[i].stat = WDS_MBI_FREE;
}
wmbx->cmbo = wmbx->tmbo = &wmbx->mbo[0];
wmbx->tmbi = &wmbx->mbi[0];
sc->sc_mbofull = 0;
init.opcode = WDSC_INIT;
init.scsi_id = sc->sc_link.scsipi_scsi.adapter_target;
init.buson_t = 48;
init.busoff_t = 24;
init.xx = 0;
ltophys(sc->sc_dmamap_mbox->dm_segs[0].ds_addr, init.mbaddr);
init.nomb = init.nimb = WDS_MBX_SIZE;
wds_cmd(iot, ioh, (u_char *)&init, sizeof init);
wds_wait(iot, ioh, WDS_STAT, WDSS_INIT, WDSS_INIT);
c = WDSC_DISUNSOL;
wds_cmd(iot, ioh, &c, sizeof c);
}
/*
* Read the board's firmware revision information.
*/
void
wds_inquire_setup_information(sc)
struct wds_softc *sc;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct wds_scb *scb;
u_char *j;
int s;
sc->sc_maxsegs = 1;
scb = wds_get_scb(sc, SCSI_NOSLEEP);
if (scb == 0)
panic("wds_inquire_setup_information: no scb available");
scb->xs = NULL;
scb->timeout = 40;
bzero(&scb->cmd, sizeof scb->cmd);
scb->cmd.write = 0x80;
scb->cmd.opcode = WDSX_GETFIRMREV;
/* Will poll card, await result. */
bus_space_write_1(iot, ioh, WDS_HCR, WDSH_DRQEN);
scb->flags |= SCB_POLLED;
s = splbio();
wds_queue_scb(sc, scb);
splx(s);
if (wds_ipoll(sc, scb, scb->timeout))
goto out;
/* Print the version number. */
printf("%s: version %x.%02x ", sc->sc_dev.dv_xname,
scb->cmd.targ, scb->cmd.scb.opcode);
sc->sc_revision = (scb->cmd.targ << 8) | scb->cmd.scb.opcode;
/* Print out the version string. */
j = 2 + &(scb->cmd.targ);
while ((*j >= 32) && (*j < 128)) {
printf("%c", *j);
j++;
}
/*
* Determine if we can use scatter/gather.
*/
if (sc->sc_revision >= 0x800)
sc->sc_maxsegs = WDS_NSEG;
out:
printf("\n");
/*
* Free up the resources used by this scb.
*/
wds_free_scb(sc, scb);
}
void
wdsminphys(bp)
struct buf *bp;
{
if (bp->b_bcount > WDS_MAXXFER)
bp->b_bcount = WDS_MAXXFER;
minphys(bp);
}
/*
* Send a SCSI command.
*/
int
wds_scsi_cmd(xs)
struct scsipi_xfer *xs;
{
struct scsipi_link *sc_link = xs->sc_link;
struct wds_softc *sc = sc_link->adapter_softc;
bus_dma_tag_t dmat = sc->sc_dmat;
struct wds_scb *scb;
struct wds_scat_gath *sg;
int error, seg, flags, s;
int fromqueue = 0, dontqueue = 0;
#ifdef TFS
struct iovec *iovp;
#endif
if (xs->flags & SCSI_RESET) {
/* XXX Fix me! */
printf("%s: reset!\n", sc->sc_dev.dv_xname);
wds_init(sc, 1);
return COMPLETE;
}
s = splbio(); /* protect the queue */
/*
* If we're running the queue from wds_done(), we've been
* called with the first queue entry as our argument.
*/
if (xs == sc->sc_queue.lh_first) {
xs = wds_dequeue(sc);
fromqueue = 1;
goto get_scb;
}
/* Polled requests can't be queued for later. */
dontqueue = xs->flags & SCSI_POLL;
/*
* If there are jobs in the queue, run them first.
*/
if (sc->sc_queue.lh_first != NULL) {
/*
* If we can't queue, we have to abort, since
* we have to preserve order.
*/
if (dontqueue) {
splx(s);
xs->error = XS_DRIVER_STUFFUP;
return (TRY_AGAIN_LATER);
}
/*
* Swap with the first queue entry.
*/
wds_enqueue(sc, xs, 0);
xs = wds_dequeue(sc);
fromqueue = 1;
}
get_scb:
flags = xs->flags;
if ((scb = wds_get_scb(sc, flags)) == NULL) {
/*
* If we can't queue, we lose.
*/
if (dontqueue) {
splx(s);
xs->error = XS_DRIVER_STUFFUP;
return (TRY_AGAIN_LATER);
}
/*
* Stuff ourselves into the queue, in front
* if we came off in the first place.
*/
wds_enqueue(sc, xs, fromqueue);
splx(s);
return (SUCCESSFULLY_QUEUED);
}
splx(s); /* done playing with the queue */
scb->xs = xs;
scb->timeout = xs->timeout;
if (xs->flags & SCSI_DATA_UIO) {
/* XXX Fix me! */
/* Let's not worry about UIO. There isn't any code for the *
* non-SG boards anyway! */
printf("%s: UIO is untested and disabled!\n",
sc->sc_dev.dv_xname);
goto bad;
}
/* Zero out the command structure. */
bzero(&scb->cmd, sizeof scb->cmd);
bcopy(xs->cmd, &scb->cmd.scb, xs->cmdlen < 12 ? xs->cmdlen : 12);
/* Set up some of the command fields. */
scb->cmd.targ = (xs->sc_link->scsipi_scsi.target << 5) |
xs->sc_link->scsipi_scsi.lun;
/* NOTE: cmd.write may be OK as 0x40 (disable direction checking)
* on boards other than the WD-7000V-ASE. Need this for the ASE:
*/
scb->cmd.write = (xs->flags & SCSI_DATA_IN) ? 0x80 : 0x00;
if (xs->datalen) {
sg = scb->scat_gath;
seg = 0;
#ifdef TFS
if (flags & SCSI_DATA_UIO) {
error = bus_Dmamap_load_uio(dmat,
scb->dmamap_xfer, (struct uio *)xs->data,
(flags & SCSI_NOSLEEP) ? BUS_DMA_NOWAIT :
BUS_DMA_WAITOK);
} else
#endif /* TFS */
{
error = bus_dmamap_load(dmat,
scb->dmamap_xfer, xs->data, xs->datalen, NULL,
(flags & SCSI_NOSLEEP) ? BUS_DMA_NOWAIT :
BUS_DMA_WAITOK);
}
if (error) {
if (error == EFBIG) {
printf("%s: wds_scsi_cmd, more than %d"
" dma segments\n",
sc->sc_dev.dv_xname, sc->sc_maxsegs);
} else {
printf("%s: wds_scsi_cmd, error %d loading"
" dma map\n",
sc->sc_dev.dv_xname, error);
}
goto bad;
}
bus_dmamap_sync(dmat, scb->dmamap_xfer, 0,
scb->dmamap_xfer->dm_mapsize,
(flags & SCSI_DATA_IN) ? BUS_DMASYNC_PREREAD :
BUS_DMASYNC_PREWRITE);
if (sc->sc_maxsegs > 1) {
/*
* Load the hardware scatter/gather map with the
* contents of the DMA map.
*/
for (seg = 0; seg < scb->dmamap_xfer->dm_nsegs;
seg++) {
ltophys(scb->dmamap_xfer->dm_segs[seg].ds_addr,
scb->scat_gath[seg].seg_addr);
ltophys(scb->dmamap_xfer->dm_segs[seg].ds_len,
scb->scat_gath[seg].seg_len);
}
/*
* Set up for scatter/gather transfer.
*/
scb->cmd.opcode = WDSX_SCSISG;
ltophys(scb->dmamap_self->dm_segs[0].ds_addr +
offsetof(struct wds_scb, scat_gath),
scb->cmd.data);
ltophys(scb->dmamap_self->dm_nsegs *
sizeof(struct wds_scat_gath), scb->cmd.len);
} else {
/*
* This board is an ASC or an ASE, and the
* transfer has been mapped contig for us.
*/
scb->cmd.opcode = WDSX_SCSICMD;
ltophys(scb->dmamap_xfer->dm_segs[0].ds_addr,
scb->cmd.data);
ltophys(scb->dmamap_xfer->dm_segs[0].ds_len,
scb->cmd.len);
}
} else {
scb->cmd.opcode = WDSX_SCSICMD;
ltophys(0, scb->cmd.data);
ltophys(0, scb->cmd.len);
}
scb->cmd.stat = 0x00;
scb->cmd.venderr = 0x00;
ltophys(0, scb->cmd.link);
/* XXX Do we really want to do this? */
if (flags & SCSI_POLL) {
/* Will poll card, await result. */
bus_space_write_1(sc->sc_iot, sc->sc_ioh, WDS_HCR, WDSH_DRQEN);
scb->flags |= SCB_POLLED;
} else {
/* Will send command, let interrupt routine handle result. */
bus_space_write_1(sc->sc_iot, sc->sc_ioh, WDS_HCR,
WDSH_IRQEN | WDSH_DRQEN);
}
s = splbio();
wds_queue_scb(sc, scb);
splx(s);
if ((flags & SCSI_POLL) == 0)
return SUCCESSFULLY_QUEUED;
if (wds_poll(sc, xs, scb->timeout)) {
wds_timeout(scb);
if (wds_poll(sc, xs, scb->timeout))
wds_timeout(scb);
}
return COMPLETE;
bad:
xs->error = XS_DRIVER_STUFFUP;
wds_free_scb(sc, scb);
return COMPLETE;
}
/*
* Send a sense request.
*/
void
wds_sense(sc, scb)
struct wds_softc *sc;
struct wds_scb *scb;
{
struct scsipi_xfer *xs = scb->xs;
struct scsipi_sense *ss = (void *)&scb->sense.scb;
int s;
/* XXXXX */
/* Send sense request SCSI command. */
xs->error = XS_SENSE;
scb->flags |= SCB_SENSE;
/* Next, setup a request sense command block */
bzero(ss, sizeof(*ss));
ss->opcode = REQUEST_SENSE;
ss->byte2 = xs->sc_link->scsipi_scsi.lun << 5;
ss->length = sizeof(struct scsipi_sense_data);
/* Set up some of the command fields. */
scb->sense.targ = scb->cmd.targ;
scb->sense.write = 0x80;
scb->sense.opcode = WDSX_SCSICMD;
ltophys(scb->dmamap_self->dm_segs[0].ds_addr +
offsetof(struct wds_scb, sense_data), scb->sense.data);
ltophys(sizeof(struct scsipi_sense_data), scb->sense.len);
s = splbio();
wds_queue_scb(sc, scb);
splx(s);
/*
* There's no reason for us to poll here. There are two cases:
* 1) If it's a polling operation, then we're called from the interrupt
* handler, and we return and continue polling.
* 2) If it's an interrupt-driven operation, then it gets completed
* later on when the REQUEST SENSE finishes.
*/
}
/*
* Poll a particular unit, looking for a particular scb
*/
int
wds_poll(sc, xs, count)
struct wds_softc *sc;
struct scsipi_xfer *xs;
int count;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
/* timeouts are in msec, so we loop in 1000 usec cycles */
while (count) {
/*
* If we had interrupts enabled, would we
* have got an interrupt?
*/
if (bus_space_read_1(iot, ioh, WDS_STAT) & WDSS_IRQ)
wdsintr(sc);
if (xs->flags & ITSDONE)
return 0;
delay(1000); /* only happens in boot so ok */
count--;
}
return 1;
}
/*
* Poll a particular unit, looking for a particular scb
*/
int
wds_ipoll(sc, scb, count)
struct wds_softc *sc;
struct wds_scb *scb;
int count;
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
/* timeouts are in msec, so we loop in 1000 usec cycles */
while (count) {
/*
* If we had interrupts enabled, would we
* have got an interrupt?
*/
if (bus_space_read_1(iot, ioh, WDS_STAT) & WDSS_IRQ)
wdsintr(sc);
if (scb->flags & SCB_DONE)
return 0;
delay(1000); /* only happens in boot so ok */
count--;
}
return 1;
}
void
wds_timeout(arg)
void *arg;
{
struct wds_scb *scb = arg;
struct scsipi_xfer *xs = scb->xs;
struct scsipi_link *sc_link = xs->sc_link;
struct wds_softc *sc = sc_link->adapter_softc;
int s;
scsi_print_addr(sc_link);
printf("timed out");
s = splbio();
#ifdef WDSDIAG
/*
* If The scb's mbx is not free, then the board has gone south?
*/
wds_collect_mbo(sc);
if (scb->flags & SCB_SENDING) {
printf("%s: not taking commands!\n", sc->sc_dev.dv_xname);
Debugger();
}
#endif
/*
* If it has been through before, then
* a previous abort has failed, don't
* try abort again
*/
if (scb->flags & SCB_ABORT) {
/* abort timed out */
printf(" AGAIN\n");
/* XXX Must reset! */
} else {
/* abort the operation that has timed out */
printf("\n");
scb->xs->error = XS_TIMEOUT;
scb->timeout = WDS_ABORT_TIMEOUT;
scb->flags |= SCB_ABORT;
wds_queue_scb(sc, scb);
}
splx(s);
}
Reference in New Issue View Git Blame Copy Permalink