1279 lines
33 KiB
C
1279 lines
33 KiB
C
/* $NetBSD: cs4281.c,v 1.13 2002/10/02 16:51:07 thorpej Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 2000 Tatoku Ogaito. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Tatoku Ogaito
|
|
* for the NetBSD Project.
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* Cirrus Logic CS4281 driver.
|
|
* Data sheets can be found
|
|
* http://www.cirrus.com/ftp/pub/4281.pdf
|
|
* ftp://ftp.alsa-project.org/pub/manuals/cirrus/cs4281tm.pdf
|
|
*
|
|
* TODO:
|
|
* 1: midi and FM support
|
|
* 2: ...
|
|
*
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: cs4281.c,v 1.13 2002/10/02 16:51:07 thorpej Exp $");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/fcntl.h>
|
|
#include <sys/device.h>
|
|
#include <sys/systm.h>
|
|
|
|
#include <dev/pci/pcidevs.h>
|
|
#include <dev/pci/pcivar.h>
|
|
#include <dev/pci/cs4281reg.h>
|
|
#include <dev/pci/cs428xreg.h>
|
|
|
|
#include <sys/audioio.h>
|
|
#include <dev/audio_if.h>
|
|
#include <dev/midi_if.h>
|
|
#include <dev/mulaw.h>
|
|
#include <dev/auconv.h>
|
|
|
|
#include <dev/ic/ac97reg.h>
|
|
#include <dev/ic/ac97var.h>
|
|
|
|
#include <dev/pci/cs428x.h>
|
|
|
|
#include <machine/bus.h>
|
|
|
|
#if defined(ENABLE_SECONDARY_CODEC)
|
|
#define MAX_CHANNELS (4)
|
|
#define MAX_FIFO_SIZE 32 /* 128/4channels */
|
|
#else
|
|
#define MAX_CHANNELS (2)
|
|
#define MAX_FIFO_SIZE 64 /* 128/2channels */
|
|
#endif
|
|
|
|
/* IF functions for audio driver */
|
|
int cs4281_match(struct device *, struct cfdata *, void *);
|
|
void cs4281_attach(struct device *, struct device *, void *);
|
|
int cs4281_intr(void *);
|
|
int cs4281_query_encoding(void *, struct audio_encoding *);
|
|
int cs4281_set_params(void *, int, int, struct audio_params *, struct audio_params *);
|
|
int cs4281_halt_output(void *);
|
|
int cs4281_halt_input(void *);
|
|
int cs4281_getdev(void *, struct audio_device *);
|
|
int cs4281_trigger_output(void *, void *, void *, int, void (*)(void *),
|
|
void *, struct audio_params *);
|
|
int cs4281_trigger_input(void *, void *, void *, int, void (*)(void *),
|
|
void *, struct audio_params *);
|
|
|
|
void cs4281_reset_codec(void *);
|
|
|
|
/* Internal functions */
|
|
u_int8_t cs4281_sr2regval(int);
|
|
void cs4281_set_dac_rate(struct cs428x_softc *, int);
|
|
void cs4281_set_adc_rate(struct cs428x_softc *, int);
|
|
int cs4281_init(struct cs428x_softc *, int);
|
|
|
|
/* Power Management */
|
|
void cs4281_power(int, void *);
|
|
|
|
struct audio_hw_if cs4281_hw_if = {
|
|
cs428x_open,
|
|
cs428x_close,
|
|
NULL,
|
|
cs4281_query_encoding,
|
|
cs4281_set_params,
|
|
cs428x_round_blocksize,
|
|
NULL,
|
|
NULL,
|
|
NULL,
|
|
NULL,
|
|
NULL,
|
|
cs4281_halt_output,
|
|
cs4281_halt_input,
|
|
NULL,
|
|
cs4281_getdev,
|
|
NULL,
|
|
cs428x_mixer_set_port,
|
|
cs428x_mixer_get_port,
|
|
cs428x_query_devinfo,
|
|
cs428x_malloc,
|
|
cs428x_free,
|
|
cs428x_round_buffersize,
|
|
cs428x_mappage,
|
|
cs428x_get_props,
|
|
cs4281_trigger_output,
|
|
cs4281_trigger_input,
|
|
NULL,
|
|
};
|
|
|
|
#if NMIDI > 0 && 0
|
|
/* Midi Interface */
|
|
void cs4281_midi_close(void*);
|
|
void cs4281_midi_getinfo(void *, struct midi_info *);
|
|
int cs4281_midi_open(void *, int, void (*)(void *, int),
|
|
void (*)(void *), void *);
|
|
int cs4281_midi_output(void *, int);
|
|
|
|
struct midi_hw_if cs4281_midi_hw_if = {
|
|
cs4281_midi_open,
|
|
cs4281_midi_close,
|
|
cs4281_midi_output,
|
|
cs4281_midi_getinfo,
|
|
0,
|
|
};
|
|
#endif
|
|
|
|
CFATTACH_DECL(clct, sizeof(struct cs428x_softc),
|
|
cs4281_match, cs4281_attach, NULL, NULL);
|
|
|
|
struct audio_device cs4281_device = {
|
|
"CS4281",
|
|
"",
|
|
"cs4281"
|
|
};
|
|
|
|
|
|
int
|
|
cs4281_match(parent, match, aux)
|
|
struct device *parent;
|
|
struct cfdata *match;
|
|
void *aux;
|
|
{
|
|
struct pci_attach_args *pa = (struct pci_attach_args *)aux;
|
|
|
|
if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_CIRRUS)
|
|
return 0;
|
|
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_CIRRUS_CS4281)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
cs4281_attach(parent, self, aux)
|
|
struct device *parent;
|
|
struct device *self;
|
|
void *aux;
|
|
{
|
|
struct cs428x_softc *sc = (struct cs428x_softc *)self;
|
|
struct pci_attach_args *pa = (struct pci_attach_args *)aux;
|
|
pci_chipset_tag_t pc = pa->pa_pc;
|
|
char const *intrstr;
|
|
pci_intr_handle_t ih;
|
|
pcireg_t reg;
|
|
char devinfo[256];
|
|
int pci_pwrmgmt_cap_reg, pci_pwrmgmt_csr_reg;
|
|
|
|
pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo);
|
|
printf(": %s (rev. 0x%02x)\n", devinfo, PCI_REVISION(pa->pa_class));
|
|
|
|
/* Map I/O register */
|
|
if (pci_mapreg_map(pa, PCI_BA0,
|
|
PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0,
|
|
&sc->ba0t, &sc->ba0h, NULL, NULL)) {
|
|
printf("%s: can't map BA0 space\n", sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
if (pci_mapreg_map(pa, PCI_BA1,
|
|
PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0,
|
|
&sc->ba1t, &sc->ba1h, NULL, NULL)) {
|
|
printf("%s: can't map BA1 space\n", sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
|
|
sc->sc_dmatag = pa->pa_dmat;
|
|
|
|
/*
|
|
* Set Power State D0.
|
|
* Without do this, 0xffffffff is read from all registers after
|
|
* using Windows.
|
|
* On my IBM Thinkpad X20, it is set to D3 after using Windows2000.
|
|
*/
|
|
if (pci_get_capability(pa->pa_pc, pa->pa_tag, PCI_CAP_PWRMGMT,
|
|
&pci_pwrmgmt_cap_reg, 0)) {
|
|
|
|
pci_pwrmgmt_csr_reg = pci_pwrmgmt_cap_reg + 4;
|
|
reg = pci_conf_read(pa->pa_pc, pa->pa_tag,
|
|
pci_pwrmgmt_csr_reg);
|
|
if ((reg & PCI_PMCSR_STATE_MASK) != PCI_PMCSR_STATE_D0) {
|
|
pci_conf_write(pc, pa->pa_tag, pci_pwrmgmt_csr_reg,
|
|
(reg & ~PCI_PMCSR_STATE_MASK) |
|
|
PCI_PMCSR_STATE_D0);
|
|
}
|
|
}
|
|
|
|
/* Enable the device (set bus master flag) */
|
|
reg = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
|
|
pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG,
|
|
reg | PCI_COMMAND_MASTER_ENABLE);
|
|
|
|
#if 0
|
|
/* LATENCY_TIMER setting */
|
|
temp1 = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_BHLC_REG);
|
|
if (PCI_LATTIMER(temp1) < 32) {
|
|
temp1 &= 0xffff00ff;
|
|
temp1 |= 0x00002000;
|
|
pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_BHLC_REG, temp1);
|
|
}
|
|
#endif
|
|
|
|
/* Map and establish the interrupt. */
|
|
if (pci_intr_map(pa, &ih)) {
|
|
printf("%s: couldn't map interrupt\n", sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
intrstr = pci_intr_string(pc, ih);
|
|
|
|
sc->sc_ih = pci_intr_establish(pc, ih, IPL_AUDIO, cs4281_intr, sc);
|
|
if (sc->sc_ih == NULL) {
|
|
printf("%s: couldn't establish interrupt", sc->sc_dev.dv_xname);
|
|
if (intrstr != NULL)
|
|
printf(" at %s", intrstr);
|
|
printf("\n");
|
|
return;
|
|
}
|
|
printf("%s: interrupting at %s\n", sc->sc_dev.dv_xname, intrstr);
|
|
|
|
/*
|
|
* Sound System start-up
|
|
*/
|
|
if (cs4281_init(sc, 1) != 0)
|
|
return;
|
|
|
|
sc->type = TYPE_CS4281;
|
|
sc->halt_input = cs4281_halt_input;
|
|
sc->halt_output = cs4281_halt_output;
|
|
|
|
sc->dma_size = CS4281_BUFFER_SIZE / MAX_CHANNELS;
|
|
sc->dma_align = 0x10;
|
|
sc->hw_blocksize = sc->dma_size / 2;
|
|
|
|
/* AC 97 attachment */
|
|
sc->host_if.arg = sc;
|
|
sc->host_if.attach = cs428x_attach_codec;
|
|
sc->host_if.read = cs428x_read_codec;
|
|
sc->host_if.write = cs428x_write_codec;
|
|
sc->host_if.reset = cs4281_reset_codec;
|
|
if (ac97_attach(&sc->host_if) != 0) {
|
|
printf("%s: ac97_attach failed\n", sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
audio_attach_mi(&cs4281_hw_if, sc, &sc->sc_dev);
|
|
|
|
#if NMIDI > 0 && 0
|
|
midi_attach_mi(&cs4281_midi_hw_if, sc, &sc->sc_dev);
|
|
#endif
|
|
|
|
sc->sc_suspend = PWR_RESUME;
|
|
sc->sc_powerhook = powerhook_establish(cs4281_power, sc);
|
|
}
|
|
|
|
int
|
|
cs4281_intr(p)
|
|
void *p;
|
|
{
|
|
struct cs428x_softc *sc = p;
|
|
u_int32_t intr, hdsr0, hdsr1;
|
|
char *empty_dma;
|
|
int handled = 0;
|
|
|
|
hdsr0 = 0;
|
|
hdsr1 = 0;
|
|
|
|
/* grab interrupt register */
|
|
intr = BA0READ4(sc, CS4281_HISR);
|
|
|
|
DPRINTF(("cs4281_intr:"));
|
|
/* not for me */
|
|
if ((intr & HISR_INTENA) == 0) {
|
|
/* clear the interrupt register */
|
|
BA0WRITE4(sc, CS4281_HICR, HICR_CHGM | HICR_IEV);
|
|
return 0;
|
|
}
|
|
|
|
if (intr & HISR_DMA0)
|
|
hdsr0 = BA0READ4(sc, CS4281_HDSR0); /* clear intr condition */
|
|
if (intr & HISR_DMA1)
|
|
hdsr1 = BA0READ4(sc, CS4281_HDSR1); /* clear intr condition */
|
|
/* clear the interrupt register */
|
|
BA0WRITE4(sc, CS4281_HICR, HICR_CHGM | HICR_IEV);
|
|
|
|
DPRINTF(("intr = 0x%08x, hdsr0 = 0x%08x hdsr1 = 0x%08x\n",
|
|
intr, hdsr0, hdsr1));
|
|
|
|
/* Playback Interrupt */
|
|
if (intr & HISR_DMA0) {
|
|
handled = 1;
|
|
DPRINTF((" PB DMA 0x%x(%d)", (int)BA0READ4(sc, CS4281_DCA0),
|
|
(int)BA0READ4(sc, CS4281_DCC0)));
|
|
if (sc->sc_pintr) {
|
|
if ((sc->sc_pi%sc->sc_pcount) == 0)
|
|
sc->sc_pintr(sc->sc_parg);
|
|
} else {
|
|
printf("unexpected play intr\n");
|
|
}
|
|
/* copy buffer */
|
|
++sc->sc_pi;
|
|
empty_dma = sc->sc_pdma->addr;
|
|
if (sc->sc_pi&1)
|
|
empty_dma += sc->hw_blocksize;
|
|
memcpy(empty_dma, sc->sc_pn, sc->hw_blocksize);
|
|
sc->sc_pn += sc->hw_blocksize;
|
|
if (sc->sc_pn >= sc->sc_pe)
|
|
sc->sc_pn = sc->sc_ps;
|
|
}
|
|
if (intr & HISR_DMA1) {
|
|
handled = 1;
|
|
/* copy from dma */
|
|
DPRINTF((" CP DMA 0x%x(%d)", (int)BA0READ4(sc, CS4281_DCA1),
|
|
(int)BA0READ4(sc, CS4281_DCC1)));
|
|
++sc->sc_ri;
|
|
empty_dma = sc->sc_rdma->addr;
|
|
if ((sc->sc_ri & 1) == 0)
|
|
empty_dma += sc->hw_blocksize;
|
|
memcpy(sc->sc_rn, empty_dma, sc->hw_blocksize);
|
|
if (sc->sc_rn >= sc->sc_re)
|
|
sc->sc_rn = sc->sc_rs;
|
|
if (sc->sc_rintr) {
|
|
if ((sc->sc_ri % sc->sc_rcount) == 0)
|
|
sc->sc_rintr(sc->sc_rarg);
|
|
} else {
|
|
printf("unexpected record intr\n");
|
|
}
|
|
}
|
|
DPRINTF(("\n"));
|
|
|
|
return handled;
|
|
}
|
|
|
|
int
|
|
cs4281_query_encoding(addr, fp)
|
|
void *addr;
|
|
struct audio_encoding *fp;
|
|
{
|
|
|
|
switch (fp->index) {
|
|
case 0:
|
|
strcpy(fp->name, AudioEulinear);
|
|
fp->encoding = AUDIO_ENCODING_ULINEAR;
|
|
fp->precision = 8;
|
|
fp->flags = 0;
|
|
break;
|
|
case 1:
|
|
strcpy(fp->name, AudioEmulaw);
|
|
fp->encoding = AUDIO_ENCODING_ULAW;
|
|
fp->precision = 8;
|
|
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
|
|
break;
|
|
case 2:
|
|
strcpy(fp->name, AudioEalaw);
|
|
fp->encoding = AUDIO_ENCODING_ALAW;
|
|
fp->precision = 8;
|
|
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
|
|
break;
|
|
case 3:
|
|
strcpy(fp->name, AudioEslinear);
|
|
fp->encoding = AUDIO_ENCODING_SLINEAR;
|
|
fp->precision = 8;
|
|
fp->flags = 0;
|
|
break;
|
|
case 4:
|
|
strcpy(fp->name, AudioEslinear_le);
|
|
fp->encoding = AUDIO_ENCODING_SLINEAR_LE;
|
|
fp->precision = 16;
|
|
fp->flags = 0;
|
|
break;
|
|
case 5:
|
|
strcpy(fp->name, AudioEulinear_le);
|
|
fp->encoding = AUDIO_ENCODING_ULINEAR_LE;
|
|
fp->precision = 16;
|
|
fp->flags = 0;
|
|
break;
|
|
case 6:
|
|
strcpy(fp->name, AudioEslinear_be);
|
|
fp->encoding = AUDIO_ENCODING_SLINEAR_BE;
|
|
fp->precision = 16;
|
|
fp->flags = 0;
|
|
break;
|
|
case 7:
|
|
strcpy(fp->name, AudioEulinear_be);
|
|
fp->encoding = AUDIO_ENCODING_ULINEAR_BE;
|
|
fp->precision = 16;
|
|
fp->flags = 0;
|
|
break;
|
|
default:
|
|
return EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
cs4281_set_params(addr, setmode, usemode, play, rec)
|
|
void *addr;
|
|
int setmode, usemode;
|
|
struct audio_params *play, *rec;
|
|
{
|
|
struct cs428x_softc *sc = addr;
|
|
struct audio_params *p;
|
|
int mode;
|
|
|
|
for (mode = AUMODE_RECORD; mode != -1;
|
|
mode = mode == AUMODE_RECORD ? AUMODE_PLAY : -1) {
|
|
if ((setmode & mode) == 0)
|
|
continue;
|
|
|
|
p = mode == AUMODE_PLAY ? play : rec;
|
|
|
|
if (p == play) {
|
|
DPRINTFN(5, ("play: sample=%ld precision=%d channels=%d\n",
|
|
p->sample_rate, p->precision, p->channels));
|
|
if (p->sample_rate < 6023 || p->sample_rate > 48000 ||
|
|
(p->precision != 8 && p->precision != 16) ||
|
|
(p->channels != 1 && p->channels != 2)) {
|
|
return (EINVAL);
|
|
}
|
|
} else {
|
|
DPRINTFN(5, ("rec: sample=%ld precision=%d channels=%d\n",
|
|
p->sample_rate, p->precision, p->channels));
|
|
if (p->sample_rate < 6023 || p->sample_rate > 48000 ||
|
|
(p->precision != 8 && p->precision != 16) ||
|
|
(p->channels != 1 && p->channels != 2)) {
|
|
return (EINVAL);
|
|
}
|
|
}
|
|
p->factor = 1;
|
|
p->sw_code = 0;
|
|
|
|
switch (p->encoding) {
|
|
case AUDIO_ENCODING_SLINEAR_BE:
|
|
break;
|
|
case AUDIO_ENCODING_SLINEAR_LE:
|
|
break;
|
|
case AUDIO_ENCODING_ULINEAR_BE:
|
|
break;
|
|
case AUDIO_ENCODING_ULINEAR_LE:
|
|
break;
|
|
case AUDIO_ENCODING_ULAW:
|
|
if (mode == AUMODE_PLAY) {
|
|
p->sw_code = mulaw_to_slinear8;
|
|
} else {
|
|
p->sw_code = slinear8_to_mulaw;
|
|
}
|
|
break;
|
|
case AUDIO_ENCODING_ALAW:
|
|
if (mode == AUMODE_PLAY) {
|
|
p->sw_code = alaw_to_slinear8;
|
|
} else {
|
|
p->sw_code = slinear8_to_alaw;
|
|
}
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
}
|
|
|
|
/* set sample rate */
|
|
cs4281_set_dac_rate(sc, play->sample_rate);
|
|
cs4281_set_adc_rate(sc, rec->sample_rate);
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
cs4281_halt_output(addr)
|
|
void *addr;
|
|
{
|
|
struct cs428x_softc *sc = addr;
|
|
|
|
BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) | DCRn_MSK);
|
|
sc->sc_prun = 0;
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
cs4281_halt_input(addr)
|
|
void *addr;
|
|
{
|
|
struct cs428x_softc *sc = addr;
|
|
|
|
BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) | DCRn_MSK);
|
|
sc->sc_rrun = 0;
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
cs4281_getdev(addr, retp)
|
|
void *addr;
|
|
struct audio_device *retp;
|
|
{
|
|
|
|
*retp = cs4281_device;
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
cs4281_trigger_output(addr, start, end, blksize, intr, arg, param)
|
|
void *addr;
|
|
void *start, *end;
|
|
int blksize;
|
|
void (*intr) __P((void *));
|
|
void *arg;
|
|
struct audio_params *param;
|
|
{
|
|
struct cs428x_softc *sc = addr;
|
|
u_int32_t fmt=0;
|
|
struct cs428x_dma *p;
|
|
int dma_count;
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (sc->sc_prun)
|
|
printf("cs4281_trigger_output: already running\n");
|
|
#endif
|
|
sc->sc_prun = 1;
|
|
|
|
DPRINTF(("cs4281_trigger_output: sc=%p start=%p end=%p "
|
|
"blksize=%d intr=%p(%p)\n", addr, start, end, blksize, intr, arg));
|
|
sc->sc_pintr = intr;
|
|
sc->sc_parg = arg;
|
|
|
|
/* stop playback DMA */
|
|
BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) | DCRn_MSK);
|
|
|
|
DPRINTF(("param: precision=%d factor=%d channels=%d encoding=%d\n",
|
|
param->precision, param->factor, param->channels,
|
|
param->encoding));
|
|
for (p = sc->sc_dmas; p != NULL && BUFADDR(p) != start; p = p->next)
|
|
;
|
|
if (p == NULL) {
|
|
printf("cs4281_trigger_output: bad addr %p\n", start);
|
|
return (EINVAL);
|
|
}
|
|
|
|
sc->sc_pcount = blksize / sc->hw_blocksize;
|
|
sc->sc_ps = (char *)start;
|
|
sc->sc_pe = (char *)end;
|
|
sc->sc_pdma = p;
|
|
sc->sc_pbuf = KERNADDR(p);
|
|
sc->sc_pi = 0;
|
|
sc->sc_pn = sc->sc_ps;
|
|
if (blksize >= sc->dma_size) {
|
|
sc->sc_pn = sc->sc_ps + sc->dma_size;
|
|
memcpy(sc->sc_pbuf, start, sc->dma_size);
|
|
++sc->sc_pi;
|
|
} else {
|
|
sc->sc_pn = sc->sc_ps + sc->hw_blocksize;
|
|
memcpy(sc->sc_pbuf, start, sc->hw_blocksize);
|
|
}
|
|
|
|
dma_count = sc->dma_size;
|
|
if (param->precision * param->factor != 8)
|
|
dma_count /= 2; /* 16 bit */
|
|
if (param->channels > 1)
|
|
dma_count /= 2; /* Stereo */
|
|
|
|
DPRINTF(("cs4281_trigger_output: DMAADDR(p)=0x%x count=%d\n",
|
|
(int)DMAADDR(p), dma_count));
|
|
BA0WRITE4(sc, CS4281_DBA0, DMAADDR(p));
|
|
BA0WRITE4(sc, CS4281_DBC0, dma_count-1);
|
|
|
|
/* set playback format */
|
|
fmt = BA0READ4(sc, CS4281_DMR0) & ~DMRn_FMTMSK;
|
|
if (param->precision * param->factor == 8)
|
|
fmt |= DMRn_SIZE8;
|
|
if (param->channels == 1)
|
|
fmt |= DMRn_MONO;
|
|
if (param->encoding == AUDIO_ENCODING_ULINEAR_BE ||
|
|
param->encoding == AUDIO_ENCODING_SLINEAR_BE)
|
|
fmt |= DMRn_BEND;
|
|
if (param->encoding == AUDIO_ENCODING_ULINEAR_BE ||
|
|
param->encoding == AUDIO_ENCODING_ULINEAR_LE)
|
|
fmt |= DMRn_USIGN;
|
|
BA0WRITE4(sc, CS4281_DMR0, fmt);
|
|
|
|
/* set sample rate */
|
|
sc->sc_prate = param->sample_rate;
|
|
cs4281_set_dac_rate(sc, param->sample_rate);
|
|
|
|
/* start DMA */
|
|
BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) & ~DCRn_MSK);
|
|
/* Enable interrupts */
|
|
BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM);
|
|
|
|
DPRINTF(("HICR =0x%08x(expected 0x00000001)\n", BA0READ4(sc, CS4281_HICR)));
|
|
DPRINTF(("HIMR =0x%08x(expected 0x00f0fc3f)\n", BA0READ4(sc, CS4281_HIMR)));
|
|
DPRINTF(("DMR0 =0x%08x(expected 0x2???0018)\n", BA0READ4(sc, CS4281_DMR0)));
|
|
DPRINTF(("DCR0 =0x%08x(expected 0x00030000)\n", BA0READ4(sc, CS4281_DCR0)));
|
|
DPRINTF(("FCR0 =0x%08x(expected 0x81000f00)\n", BA0READ4(sc, CS4281_FCR0)));
|
|
DPRINTF(("DACSR=0x%08x(expected 1 for 44kHz 5 for 8kHz)\n",
|
|
BA0READ4(sc, CS4281_DACSR)));
|
|
DPRINTF(("SRCSA=0x%08x(expected 0x0b0a0100)\n", BA0READ4(sc, CS4281_SRCSA)));
|
|
DPRINTF(("SSPM&SSPM_PSRCEN =0x%08x(expected 0x00000010)\n",
|
|
BA0READ4(sc, CS4281_SSPM) & SSPM_PSRCEN));
|
|
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
cs4281_trigger_input(addr, start, end, blksize, intr, arg, param)
|
|
void *addr;
|
|
void *start, *end;
|
|
int blksize;
|
|
void (*intr) __P((void *));
|
|
void *arg;
|
|
struct audio_params *param;
|
|
{
|
|
struct cs428x_softc *sc = addr;
|
|
struct cs428x_dma *p;
|
|
u_int32_t fmt=0;
|
|
int dma_count;
|
|
|
|
#ifdef DIAGNOSTIC
|
|
if (sc->sc_rrun)
|
|
printf("cs4281_trigger_input: already running\n");
|
|
#endif
|
|
sc->sc_rrun = 1;
|
|
DPRINTF(("cs4281_trigger_input: sc=%p start=%p end=%p "
|
|
"blksize=%d intr=%p(%p)\n", addr, start, end, blksize, intr, arg));
|
|
sc->sc_rintr = intr;
|
|
sc->sc_rarg = arg;
|
|
|
|
/* stop recording DMA */
|
|
BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) | DCRn_MSK);
|
|
|
|
for (p = sc->sc_dmas; p && BUFADDR(p) != start; p = p->next)
|
|
;
|
|
if (!p) {
|
|
printf("cs4281_trigger_input: bad addr %p\n", start);
|
|
return (EINVAL);
|
|
}
|
|
|
|
sc->sc_rcount = blksize / sc->hw_blocksize;
|
|
sc->sc_rs = (char *)start;
|
|
sc->sc_re = (char *)end;
|
|
sc->sc_rdma = p;
|
|
sc->sc_rbuf = KERNADDR(p);
|
|
sc->sc_ri = 0;
|
|
sc->sc_rn = sc->sc_rs;
|
|
|
|
dma_count = sc->dma_size;
|
|
if (param->precision * param->factor == 8)
|
|
dma_count /= 2;
|
|
if (param->channels > 1)
|
|
dma_count /= 2;
|
|
|
|
DPRINTF(("cs4281_trigger_input: DMAADDR(p)=0x%x count=%d\n",
|
|
(int)DMAADDR(p), dma_count));
|
|
BA0WRITE4(sc, CS4281_DBA1, DMAADDR(p));
|
|
BA0WRITE4(sc, CS4281_DBC1, dma_count-1);
|
|
|
|
/* set recording format */
|
|
fmt = BA0READ4(sc, CS4281_DMR1) & ~DMRn_FMTMSK;
|
|
if (param->precision * param->factor == 8)
|
|
fmt |= DMRn_SIZE8;
|
|
if (param->channels == 1)
|
|
fmt |= DMRn_MONO;
|
|
if (param->encoding == AUDIO_ENCODING_ULINEAR_BE ||
|
|
param->encoding == AUDIO_ENCODING_SLINEAR_BE)
|
|
fmt |= DMRn_BEND;
|
|
if (param->encoding == AUDIO_ENCODING_ULINEAR_BE ||
|
|
param->encoding == AUDIO_ENCODING_ULINEAR_LE)
|
|
fmt |= DMRn_USIGN;
|
|
BA0WRITE4(sc, CS4281_DMR1, fmt);
|
|
|
|
/* set sample rate */
|
|
sc->sc_rrate = param->sample_rate;
|
|
cs4281_set_adc_rate(sc, param->sample_rate);
|
|
|
|
/* Start DMA */
|
|
BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) & ~DCRn_MSK);
|
|
/* Enable interrupts */
|
|
BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM);
|
|
|
|
DPRINTF(("HICR=0x%08x\n", BA0READ4(sc, CS4281_HICR)));
|
|
DPRINTF(("HIMR=0x%08x\n", BA0READ4(sc, CS4281_HIMR)));
|
|
DPRINTF(("DMR1=0x%08x\n", BA0READ4(sc, CS4281_DMR1)));
|
|
DPRINTF(("DCR1=0x%08x\n", BA0READ4(sc, CS4281_DCR1)));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Power Hook */
|
|
void
|
|
cs4281_power(why, v)
|
|
int why;
|
|
void *v;
|
|
{
|
|
struct cs428x_softc *sc = (struct cs428x_softc *)v;
|
|
static u_int32_t dba0 = 0, dbc0 = 0, dmr0 = 0, dcr0 = 0;
|
|
static u_int32_t dba1 = 0, dbc1 = 0, dmr1 = 0, dcr1 = 0;
|
|
|
|
DPRINTF(("%s: cs4281_power why=%d\n", sc->sc_dev.dv_xname, why));
|
|
switch (why) {
|
|
case PWR_SUSPEND:
|
|
case PWR_STANDBY:
|
|
sc->sc_suspend = why;
|
|
|
|
/* save current playback status */
|
|
if (sc->sc_prun) {
|
|
dcr0 = BA0READ4(sc, CS4281_DCR0);
|
|
dmr0 = BA0READ4(sc, CS4281_DMR0);
|
|
dbc0 = BA0READ4(sc, CS4281_DBC0);
|
|
dba0 = BA0READ4(sc, CS4281_DBA0);
|
|
}
|
|
|
|
/* save current capture status */
|
|
if (sc->sc_rrun) {
|
|
dcr1 = BA0READ4(sc, CS4281_DCR1);
|
|
dmr1 = BA0READ4(sc, CS4281_DMR1);
|
|
dbc1 = BA0READ4(sc, CS4281_DBC1);
|
|
dba1 = BA0READ4(sc, CS4281_DBA1);
|
|
}
|
|
/* Stop DMA */
|
|
BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) | DCRn_MSK);
|
|
BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) | DCRn_MSK);
|
|
break;
|
|
case PWR_RESUME:
|
|
if (sc->sc_suspend == PWR_RESUME) {
|
|
printf("cs4281_power: odd, resume without suspend.\n");
|
|
sc->sc_suspend = why;
|
|
return;
|
|
}
|
|
sc->sc_suspend = why;
|
|
cs4281_init(sc, 0);
|
|
cs4281_reset_codec(sc);
|
|
|
|
/* restore ac97 registers */
|
|
(*sc->codec_if->vtbl->restore_ports)(sc->codec_if);
|
|
|
|
/* restore DMA related status */
|
|
if (sc->sc_prun) {
|
|
cs4281_set_dac_rate(sc, sc->sc_prate);
|
|
BA0WRITE4(sc, CS4281_DBA0, dba0);
|
|
BA0WRITE4(sc, CS4281_DBC0, dbc0);
|
|
BA0WRITE4(sc, CS4281_DMR0, dmr0);
|
|
BA0WRITE4(sc, CS4281_DCR0, dcr0);
|
|
}
|
|
if (sc->sc_rrun) {
|
|
cs4281_set_adc_rate(sc, sc->sc_rrate);
|
|
BA0WRITE4(sc, CS4281_DBA1, dba1);
|
|
BA0WRITE4(sc, CS4281_DBC1, dbc1);
|
|
BA0WRITE4(sc, CS4281_DMR1, dmr1);
|
|
BA0WRITE4(sc, CS4281_DCR1, dcr1);
|
|
}
|
|
/* enable intterupts */
|
|
if (sc->sc_prun || sc->sc_rrun)
|
|
BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM);
|
|
break;
|
|
case PWR_SOFTSUSPEND:
|
|
case PWR_SOFTSTANDBY:
|
|
case PWR_SOFTRESUME:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* control AC97 codec */
|
|
void
|
|
cs4281_reset_codec(void *addr)
|
|
{
|
|
struct cs428x_softc *sc;
|
|
u_int16_t data;
|
|
u_int32_t dat32;
|
|
int n;
|
|
|
|
sc = addr;
|
|
|
|
DPRINTFN(3, ("cs4281_reset_codec\n"));
|
|
|
|
/* Reset codec */
|
|
BA0WRITE4(sc, CS428X_ACCTL, 0);
|
|
delay(50); /* delay 50us */
|
|
|
|
BA0WRITE4(sc, CS4281_SPMC, 0);
|
|
delay(100); /* delay 100us */
|
|
BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN);
|
|
#if defined(ENABLE_SECONDARY_CODEC)
|
|
BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN | SPCM_ASDIN2E);
|
|
BA0WRITE4(sc, CS4281_SERMC, SERMC_TCID);
|
|
#endif
|
|
delay(50000); /* XXX: delay 50ms */
|
|
|
|
/* Enable ASYNC generation */
|
|
BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN);
|
|
|
|
/* Wait for codec ready. Linux driver waits 50ms here */
|
|
n = 0;
|
|
while ((BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY) == 0) {
|
|
delay(100);
|
|
if (++n > 1000) {
|
|
printf("reset_codec: AC97 codec ready timeout\n");
|
|
return;
|
|
}
|
|
}
|
|
#if defined(ENABLE_SECONDARY_CODEC)
|
|
/* secondary codec ready*/
|
|
n = 0;
|
|
while ((BA0READ4(sc, CS4281_ACSTS2) & ACSTS2_CRDY2) == 0) {
|
|
delay(100);
|
|
if (++n > 1000)
|
|
return;
|
|
}
|
|
#endif
|
|
/* Set the serial timing configuration */
|
|
/* XXX: undocumented but the Linux driver do this */
|
|
BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97);
|
|
|
|
/* Wait for codec ready signal */
|
|
n = 0;
|
|
do {
|
|
delay(1000);
|
|
if (++n > 1000) {
|
|
printf("%s: timeout waiting for codec ready\n",
|
|
sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
dat32 = BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY;
|
|
} while (dat32 == 0);
|
|
|
|
/* Enable Valid Frame output on ASDOUT */
|
|
BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN | ACCTL_VFRM);
|
|
|
|
/* Wait until codec calibration is finished. Codec register 26h */
|
|
n = 0;
|
|
do {
|
|
delay(1);
|
|
if (++n > 1000) {
|
|
printf("%s: timeout waiting for codec calibration\n",
|
|
sc->sc_dev.dv_xname);
|
|
return ;
|
|
}
|
|
cs428x_read_codec(sc, AC97_REG_POWER, &data);
|
|
} while ((data & 0x0f) != 0x0f);
|
|
|
|
/* Set the serial timing configuration again */
|
|
/* XXX: undocumented but the Linux driver do this */
|
|
BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97);
|
|
|
|
/* Wait until we've sampled input slots 3 & 4 as valid */
|
|
n = 0;
|
|
do {
|
|
delay(1000);
|
|
if (++n > 1000) {
|
|
printf("%s: timeout waiting for sampled input slots as valid\n",
|
|
sc->sc_dev.dv_xname);
|
|
return;
|
|
}
|
|
dat32 = BA0READ4(sc, CS428X_ACISV) & (ACISV_ISV3 | ACISV_ISV4) ;
|
|
} while (dat32 != (ACISV_ISV3 | ACISV_ISV4));
|
|
|
|
/* Start digital data transfer of audio data to the codec */
|
|
BA0WRITE4(sc, CS428X_ACOSV, (ACOSV_SLV3 | ACOSV_SLV4));
|
|
}
|
|
|
|
|
|
/* Internal functions */
|
|
|
|
/* convert sample rate to register value */
|
|
u_int8_t
|
|
cs4281_sr2regval(rate)
|
|
int rate;
|
|
{
|
|
u_int8_t retval;
|
|
|
|
/* We don't have to change here. but anyway ... */
|
|
if (rate > 48000)
|
|
rate = 48000;
|
|
if (rate < 6023)
|
|
rate = 6023;
|
|
|
|
switch (rate) {
|
|
case 8000:
|
|
retval = 5;
|
|
break;
|
|
case 11025:
|
|
retval = 4;
|
|
break;
|
|
case 16000:
|
|
retval = 3;
|
|
break;
|
|
case 22050:
|
|
retval = 2;
|
|
break;
|
|
case 44100:
|
|
retval = 1;
|
|
break;
|
|
case 48000:
|
|
retval = 0;
|
|
break;
|
|
default:
|
|
retval = 1536000/rate; /* == 24576000/(rate*16) */
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
void
|
|
cs4281_set_adc_rate(sc, rate)
|
|
struct cs428x_softc *sc;
|
|
int rate;
|
|
{
|
|
|
|
BA0WRITE4(sc, CS4281_ADCSR, cs4281_sr2regval(rate));
|
|
}
|
|
|
|
void
|
|
cs4281_set_dac_rate(sc, rate)
|
|
struct cs428x_softc *sc;
|
|
int rate;
|
|
{
|
|
|
|
BA0WRITE4(sc, CS4281_DACSR, cs4281_sr2regval(rate));
|
|
}
|
|
|
|
int
|
|
cs4281_init(sc, init)
|
|
struct cs428x_softc *sc;
|
|
int init;
|
|
{
|
|
int n;
|
|
u_int16_t data;
|
|
u_int32_t dat32;
|
|
|
|
/* set "Configuration Write Protect" register to
|
|
* 0x4281 to allow to write */
|
|
BA0WRITE4(sc, CS4281_CWPR, 0x4281);
|
|
|
|
/*
|
|
* Unset "Full Power-Down bit of Extended PCI Power Management
|
|
* Control" register to release the reset state.
|
|
*/
|
|
dat32 = BA0READ4(sc, CS4281_EPPMC);
|
|
if (dat32 & EPPMC_FPDN) {
|
|
BA0WRITE4(sc, CS4281_EPPMC, dat32 & ~EPPMC_FPDN);
|
|
}
|
|
|
|
/* Start PLL out in known state */
|
|
BA0WRITE4(sc, CS4281_CLKCR1, 0);
|
|
/* Start serial ports out in known state */
|
|
BA0WRITE4(sc, CS4281_SERMC, 0);
|
|
|
|
/* Reset codec */
|
|
BA0WRITE4(sc, CS428X_ACCTL, 0);
|
|
delay(50); /* delay 50us */
|
|
|
|
BA0WRITE4(sc, CS4281_SPMC, 0);
|
|
delay(100); /* delay 100us */
|
|
BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN);
|
|
#if defined(ENABLE_SECONDARY_CODEC)
|
|
BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN | SPCM_ASDIN2E);
|
|
BA0WRITE4(sc, CS4281_SERMC, SERMC_TCID);
|
|
#endif
|
|
delay(50000); /* XXX: delay 50ms */
|
|
|
|
/* Turn on Sound System clocks based on ABITCLK */
|
|
BA0WRITE4(sc, CS4281_CLKCR1, CLKCR1_DLLP);
|
|
delay(50000); /* XXX: delay 50ms */
|
|
BA0WRITE4(sc, CS4281_CLKCR1, CLKCR1_SWCE | CLKCR1_DLLP);
|
|
|
|
/* Set enables for sections that are needed in the SSPM registers */
|
|
BA0WRITE4(sc, CS4281_SSPM,
|
|
SSPM_MIXEN | /* Mixer */
|
|
SSPM_CSRCEN | /* Capture SRC */
|
|
SSPM_PSRCEN | /* Playback SRC */
|
|
SSPM_JSEN | /* Joystick */
|
|
SSPM_ACLEN | /* AC LINK */
|
|
SSPM_FMEN /* FM */
|
|
);
|
|
|
|
/* Wait for clock stabilization */
|
|
n = 0;
|
|
#if 1
|
|
/* what document says */
|
|
while ((BA0READ4(sc, CS4281_CLKCR1)& (CLKCR1_DLLRDY | CLKCR1_CLKON))
|
|
!= (CLKCR1_DLLRDY | CLKCR1_CLKON)) {
|
|
delay(100);
|
|
if (++n > 1000) {
|
|
printf("%s: timeout waiting for clock stabilization\n",
|
|
sc->sc_dev.dv_xname);
|
|
return -1;
|
|
}
|
|
}
|
|
#else
|
|
/* Cirrus driver for Linux does */
|
|
while (!(BA0READ4(sc, CS4281_CLKCR1) & CLKCR1_DLLRDY)) {
|
|
delay(1000);
|
|
if (++n > 1000) {
|
|
printf("%s: timeout waiting for clock stabilization\n",
|
|
sc->sc_dev.dv_xname);
|
|
return -1;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* Enable ASYNC generation */
|
|
BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN);
|
|
|
|
/* Wait for codec ready. Linux driver waits 50ms here */
|
|
n = 0;
|
|
while ((BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY) == 0) {
|
|
delay(100);
|
|
if (++n > 1000) {
|
|
printf("%s: timeout waiting for codec ready\n",
|
|
sc->sc_dev.dv_xname);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
#if defined(ENABLE_SECONDARY_CODEC)
|
|
/* secondary codec ready*/
|
|
n = 0;
|
|
while ((BA0READ4(sc, CS4281_ACSTS2) & ACSTS2_CRDY2) == 0) {
|
|
delay(100);
|
|
if (++n > 1000) {
|
|
printf("%s: timeout waiting for secondary codec ready\n",
|
|
sc->sc_dev.dv_xname);
|
|
return -1;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* Set the serial timing configuration */
|
|
/* XXX: undocumented but the Linux driver do this */
|
|
BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97);
|
|
|
|
/* Wait for codec ready signal */
|
|
n = 0;
|
|
do {
|
|
delay(1000);
|
|
if (++n > 1000) {
|
|
printf("%s: timeout waiting for codec ready\n",
|
|
sc->sc_dev.dv_xname);
|
|
return -1;
|
|
}
|
|
dat32 = BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY;
|
|
} while (dat32 == 0);
|
|
|
|
/* Enable Valid Frame output on ASDOUT */
|
|
BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN | ACCTL_VFRM);
|
|
|
|
/* Wait until codec calibration is finished. codec register 26h */
|
|
n = 0;
|
|
do {
|
|
delay(1);
|
|
if (++n > 1000) {
|
|
printf("%s: timeout waiting for codec calibration\n",
|
|
sc->sc_dev.dv_xname);
|
|
return -1;
|
|
}
|
|
cs428x_read_codec(sc, AC97_REG_POWER, &data);
|
|
} while ((data & 0x0f) != 0x0f);
|
|
|
|
/* Set the serial timing configuration again */
|
|
/* XXX: undocumented but the Linux driver do this */
|
|
BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97);
|
|
|
|
/* Wait until we've sampled input slots 3 & 4 as valid */
|
|
n = 0;
|
|
do {
|
|
delay(1000);
|
|
if (++n > 1000) {
|
|
printf("%s: timeout waiting for sampled input slots as valid\n",
|
|
sc->sc_dev.dv_xname);
|
|
return -1;
|
|
}
|
|
dat32 = BA0READ4(sc, CS428X_ACISV) & (ACISV_ISV3 | ACISV_ISV4);
|
|
} while (dat32 != (ACISV_ISV3 | ACISV_ISV4));
|
|
|
|
/* Start digital data transfer of audio data to the codec */
|
|
BA0WRITE4(sc, CS428X_ACOSV, (ACOSV_SLV3 | ACOSV_SLV4));
|
|
|
|
cs428x_write_codec(sc, AC97_REG_HEADPHONE_VOLUME, 0);
|
|
cs428x_write_codec(sc, AC97_REG_MASTER_VOLUME, 0);
|
|
|
|
/* Power on the DAC */
|
|
cs428x_read_codec(sc, AC97_REG_POWER, &data);
|
|
cs428x_write_codec(sc, AC97_REG_POWER, data & 0xfdff);
|
|
|
|
/* Wait until we sample a DAC ready state.
|
|
* Not documented, but Linux driver does.
|
|
*/
|
|
for (n = 0; n < 32; ++n) {
|
|
delay(1000);
|
|
cs428x_read_codec(sc, AC97_REG_POWER, &data);
|
|
if (data & 0x02)
|
|
break;
|
|
}
|
|
|
|
/* Power on the ADC */
|
|
cs428x_read_codec(sc, AC97_REG_POWER, &data);
|
|
cs428x_write_codec(sc, AC97_REG_POWER, data & 0xfeff);
|
|
|
|
/* Wait until we sample ADC ready state.
|
|
* Not documented, but Linux driver does.
|
|
*/
|
|
for (n = 0; n < 32; ++n) {
|
|
delay(1000);
|
|
cs428x_read_codec(sc, AC97_REG_POWER, &data);
|
|
if (data & 0x01)
|
|
break;
|
|
}
|
|
|
|
#if 0
|
|
/* Initialize AC-Link features */
|
|
/* variable sample-rate support */
|
|
mem = BA0READ4(sc, CS4281_SERMC);
|
|
mem |= (SERMC_ODSEN1 | SERMC_ODSEN2);
|
|
BA0WRITE4(sc, CS4281_SERMC, mem);
|
|
/* XXX: more... */
|
|
|
|
/* Initialize SSCR register features */
|
|
/* XXX: hardware volume setting */
|
|
BA0WRITE4(sc, CS4281_SSCR, ~SSCR_HVC); /* disable HW volume setting */
|
|
#endif
|
|
|
|
/* disable Sound Blaster Pro emulation */
|
|
/* XXX:
|
|
* Cannot set since the documents does not describe which bit is
|
|
* correspond to SSCR_SB. Since the reset value of SSCR is 0,
|
|
* we can ignore it.*/
|
|
#if 0
|
|
BA0WRITE4(sc, CS4281_SSCR, SSCR_SB);
|
|
#endif
|
|
|
|
/* map AC97 PCM playback to DMA Channel 0 */
|
|
/* Reset FEN bit to setup first */
|
|
BA0WRITE4(sc, CS4281_FCR0, (BA0READ4(sc, CS4281_FCR0) & ~FCRn_FEN));
|
|
/*
|
|
*| RS[4:0]/| |
|
|
*| LS[4:0] | AC97 | Slot Function
|
|
*|---------+--------+--------------------
|
|
*| 0 | 3 | Left PCM Playback
|
|
*| 1 | 4 | Right PCM Playback
|
|
*| 2 | 5 | Phone Line 1 DAC
|
|
*| 3 | 6 | Center PCM Playback
|
|
*....
|
|
* quoted from Table 29(p109)
|
|
*/
|
|
dat32 = 0x01 << 24 | /* RS[4:0] = 1 see above */
|
|
0x00 << 16 | /* LS[4:0] = 0 see above */
|
|
0x0f << 8 | /* SZ[6:0] = 15 size of buffer */
|
|
0x00 << 0 ; /* OF[6:0] = 0 offset */
|
|
BA0WRITE4(sc, CS4281_FCR0, dat32);
|
|
BA0WRITE4(sc, CS4281_FCR0, dat32 | FCRn_FEN);
|
|
|
|
/* map AC97 PCM record to DMA Channel 1 */
|
|
/* Reset FEN bit to setup first */
|
|
BA0WRITE4(sc, CS4281_FCR1, (BA0READ4(sc, CS4281_FCR1) & ~FCRn_FEN));
|
|
/*
|
|
*| RS[4:0]/|
|
|
*| LS[4:0] | AC97 | Slot Function
|
|
*|---------+------+-------------------
|
|
*| 10 | 3 | Left PCM Record
|
|
*| 11 | 4 | Right PCM Record
|
|
*| 12 | 5 | Phone Line 1 ADC
|
|
*| 13 | 6 | Mic ADC
|
|
*....
|
|
* quoted from Table 30(p109)
|
|
*/
|
|
dat32 = 0x0b << 24 | /* RS[4:0] = 11 See above */
|
|
0x0a << 16 | /* LS[4:0] = 10 See above */
|
|
0x0f << 8 | /* SZ[6:0] = 15 Size of buffer */
|
|
0x10 << 0 ; /* OF[6:0] = 16 offset */
|
|
|
|
/* XXX: I cannot understand why FCRn_PSH is needed here. */
|
|
BA0WRITE4(sc, CS4281_FCR1, dat32 | FCRn_PSH);
|
|
BA0WRITE4(sc, CS4281_FCR1, dat32 | FCRn_FEN);
|
|
|
|
#if 0
|
|
/* Disable DMA Channel 2, 3 */
|
|
BA0WRITE4(sc, CS4281_FCR2, (BA0READ4(sc, CS4281_FCR2) & ~FCRn_FEN));
|
|
BA0WRITE4(sc, CS4281_FCR3, (BA0READ4(sc, CS4281_FCR3) & ~FCRn_FEN));
|
|
#endif
|
|
|
|
/* Set the SRC Slot Assignment accordingly */
|
|
/*| PLSS[4:0]/
|
|
*| PRSS[4:0] | AC97 | Slot Function
|
|
*|-----------+------+----------------
|
|
*| 0 | 3 | Left PCM Playback
|
|
*| 1 | 4 | Right PCM Playback
|
|
*| 2 | 5 | phone line 1 DAC
|
|
*| 3 | 6 | Center PCM Playback
|
|
*| 4 | 7 | Left Surround PCM Playback
|
|
*| 5 | 8 | Right Surround PCM Playback
|
|
*......
|
|
*
|
|
*| CLSS[4:0]/
|
|
*| CRSS[4:0] | AC97 | Codec |Slot Function
|
|
*|-----------+------+-------+-----------------
|
|
*| 10 | 3 |Primary| Left PCM Record
|
|
*| 11 | 4 |Primary| Right PCM Record
|
|
*| 12 | 5 |Primary| Phone Line 1 ADC
|
|
*| 13 | 6 |Primary| Mic ADC
|
|
*|.....
|
|
*| 20 | 3 | Sec. | Left PCM Record
|
|
*| 21 | 4 | Sec. | Right PCM Record
|
|
*| 22 | 5 | Sec. | Phone Line 1 ADC
|
|
*| 23 | 6 | Sec. | Mic ADC
|
|
*/
|
|
dat32 = 0x0b << 24 | /* CRSS[4:0] Right PCM Record(primary) */
|
|
0x0a << 16 | /* CLSS[4:0] Left PCM Record(primary) */
|
|
0x01 << 8 | /* PRSS[4:0] Right PCM Playback */
|
|
0x00 << 0; /* PLSS[4:0] Left PCM Playback */
|
|
BA0WRITE4(sc, CS4281_SRCSA, dat32);
|
|
|
|
/* Set interrupt to occurred at Half and Full terminal
|
|
* count interrupt enable for DMA channel 0 and 1.
|
|
* To keep DMA stop, set MSK.
|
|
*/
|
|
dat32 = DCRn_HTCIE | DCRn_TCIE | DCRn_MSK;
|
|
BA0WRITE4(sc, CS4281_DCR0, dat32);
|
|
BA0WRITE4(sc, CS4281_DCR1, dat32);
|
|
|
|
/* Set Auto-Initialize Contorl enable */
|
|
BA0WRITE4(sc, CS4281_DMR0,
|
|
DMRn_DMA | DMRn_AUTO | DMRn_TR_READ);
|
|
BA0WRITE4(sc, CS4281_DMR1,
|
|
DMRn_DMA | DMRn_AUTO | DMRn_TR_WRITE);
|
|
|
|
/* Clear DMA Mask in HIMR */
|
|
dat32 = ~HIMR_DMAIM & ~HIMR_D1IM & ~HIMR_D0IM;
|
|
BA0WRITE4(sc, CS4281_HIMR,
|
|
BA0READ4(sc, CS4281_HIMR) & dat32);
|
|
|
|
/* set current status */
|
|
if (init != 0) {
|
|
sc->sc_prun = 0;
|
|
sc->sc_rrun = 0;
|
|
}
|
|
|
|
/* setup playback volume */
|
|
BA0WRITE4(sc, CS4281_PPRVC, 7);
|
|
BA0WRITE4(sc, CS4281_PPLVC, 7);
|
|
|
|
return 0;
|
|
}
|