724 lines
26 KiB
C
724 lines
26 KiB
C
/* $NetBSD: grf_rhreg.h,v 1.15 2005/12/24 20:06:47 perry Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1994 Markus Wild
|
|
* Copyright (c) 1994 Lutz Vieweg
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Lutz Vieweg.
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
#ifndef _GRF_RHREG_H
|
|
#define _GRF_RHREG_H
|
|
|
|
#define EMPTY_ALPHA 0x2010 /* this is the char and the attribute
|
|
that AlphaErase will fill into the
|
|
text-screen */
|
|
|
|
#define MEMSIZE 4 /* Set this to 1 or 4 (MB), according to the
|
|
RAM on your Retina BLT Z3 board */
|
|
/*
|
|
* The following definitions are places in the frame-buffer memory
|
|
* which are used for special purposes. While the displayed screen
|
|
* itself is always beginning at the start of the frame-buffer
|
|
* memory, the following special places are located at the end
|
|
* of the memory to keep free as much space as possible for the
|
|
* screen - the user might want to use monitor-definitions with
|
|
* huge logical dimensions (e.g. 2048x2000 ?). This way of defining
|
|
* special locations in the frame-buffer memory is far from being
|
|
* elegant - you may want to use you own, real memory-management...
|
|
* but remember that some routines in RZ3_BSD.cc REALLY NEED those
|
|
* memory locations to function properly, so if you manage the
|
|
* frame-buffer memory on your own, make sure to change those
|
|
* definitions appropriately.
|
|
*/
|
|
|
|
/* reserve some space for one pattern line */
|
|
#define PAT_MEM_SIZE 16*3
|
|
#define PAT_MEM_OFF (MEMSIZE*1024*1024 - PAT_MEM_SIZE)
|
|
|
|
/* reserve some space for the hardware cursor (up to 64x64 pixels) */
|
|
#define HWC_MEM_SIZE 1024
|
|
#define HWC_MEM_OFF ((PAT_MEM_OFF - HWC_MEM_SIZE) & 0xffffff00)
|
|
|
|
/*
|
|
* The following structure is passed to RZ3Init() and holds the
|
|
* monitor-definition. You may either use one of the ready-made
|
|
* definitions in RZ3_monitors.cc or you can define them on your
|
|
* own, take a look at RZ3_monitors.cc for more information.
|
|
*/
|
|
struct MonDef {
|
|
|
|
/* first the general monitor characteristics */
|
|
|
|
unsigned long FQ;
|
|
unsigned char FLG;
|
|
|
|
unsigned short MW; /* physical screen width in pixels */
|
|
/* has to be at least a multiple of 8 */
|
|
unsigned short MH; /* physical screen height in pixels */
|
|
|
|
unsigned short HBS;
|
|
unsigned short HSS;
|
|
unsigned short HSE;
|
|
unsigned short HBE;
|
|
unsigned short HT;
|
|
unsigned short VBS;
|
|
unsigned short VSS;
|
|
unsigned short VSE;
|
|
unsigned short VBE;
|
|
unsigned short VT;
|
|
|
|
unsigned short DEP; /* Color-depth, 4 enables text-mode */
|
|
/* 8 enables 256-color graphics-mode, */
|
|
/* 16 and 24bit gfx not supported yet */
|
|
|
|
unsigned char * PAL; /* points to 16*3 byte RGB-palette data */
|
|
/* use LoadPalette() to set colors 0..255 */
|
|
/* in 256-color-gfx mode */
|
|
|
|
/*
|
|
* all following entries are font-specific in
|
|
* text-mode. Make sure your monitor
|
|
* parameters are calculated for the
|
|
* appropriate font width and height!
|
|
*/
|
|
|
|
unsigned short TX; /* Text-mode (DEP=4): */
|
|
/* screen-width in characters */
|
|
|
|
/* Gfx-mode (DEP > 4) */
|
|
/* "logical" screen-width, */
|
|
/* use values > MW to allow */
|
|
/* hardware-panning */
|
|
|
|
unsigned short TY; /* Text-mode: */
|
|
/* screen-height in characters */
|
|
|
|
/* Gfx-mode: "logical" screen */
|
|
/* height for panning */
|
|
|
|
/* the following values are currently unused for gfx-mode */
|
|
|
|
unsigned short XY; /* TX*TY (speeds up some calcs.) */
|
|
|
|
unsigned short FX; /* font-width (valid values: 4,7-16) */
|
|
unsigned short FY; /* font-height (valid range: 1-32) */
|
|
unsigned char * FData; /* pointer to the font-data */
|
|
|
|
/*
|
|
* The font data is simply an array of bytes defining
|
|
* the chars in ascending order, line by line. If your
|
|
* font is wider than 8 pixel, FData has to be an
|
|
* array of words.
|
|
*/
|
|
|
|
unsigned short FLo; /* lowest character defined */
|
|
unsigned short FHi; /* highest char. defined */
|
|
|
|
};
|
|
|
|
|
|
/*
|
|
* The following are the prototypes for the low-level
|
|
* routines you may want to call.
|
|
*/
|
|
|
|
#if 0
|
|
|
|
#ifdef __GNUG__
|
|
|
|
/* The prototypes for C++, prototypes for C (with explanations) below */
|
|
|
|
"C" unsigned char * RZ3Init (volatile void * HardWareAddress, struct MonDef * md);
|
|
"C" void RZ3SetCursorPos (unsigned short pos);
|
|
"C" void RZ3AlphaErase (unsigned short xd, unsigned short yd,
|
|
unsigned short w, unsigned short h );
|
|
"C" void RZ3AlphaCopy (unsigned short xs, unsigned short ys,
|
|
unsigned short xd, unsigned short yd,
|
|
unsigned short w, unsigned short h );
|
|
"C" void RZ3BitBlit (struct grf_bitblt * gbb );
|
|
"C" void RZ3BitBlit16 (struct grf_bitblt * gbb );
|
|
"C" void RZ3LoadPalette (unsigned char * pal, unsigned char firstcol, unsigned char colors);
|
|
"C" void RZ3SetPalette (unsigned char colornum, unsigned char red, unsigned char green, unsigned char blue);
|
|
"C" void RZ3SetPanning (unsigned short xoff, unsigned short yoff);
|
|
"C" void RZ3SetupHWC (unsigned char col1, unsigned col2,
|
|
unsigned char hsx, unsigned char hsy,
|
|
const unsigned long * data);
|
|
"C" void RZ3DisableHWC (void);
|
|
"C" void RZ3SetHWCloc (unsigned short x, unsigned short y);
|
|
#else
|
|
|
|
/* The prototypes for C */
|
|
/* with a little explanation */
|
|
|
|
unsigned char * RZ3Init(volatile void * BoardAddress, struct MonDef * md);
|
|
|
|
/*
|
|
* This routine initialises the Retina Z3 hardware, opens a
|
|
* text- or gfx-mode screen, depending on the value of
|
|
* MonDef.DEP, and sets the cursor to position 0.
|
|
* It takes as arguments a pointer to the hardware-base
|
|
* address as it is denoted in the DevConf structure
|
|
* of the AmigaDOS, and a pointer to a struct MonDef
|
|
* which describes the screen-mode parameters.
|
|
*
|
|
* The routine returns 0 if it was unable to open the screen,
|
|
* or an unsigned char * to the display memory when it
|
|
* succeeded.
|
|
*
|
|
* The organisation of the display memory in text-mode is a
|
|
* little strange (Intel-typically...) :
|
|
*
|
|
* Byte 00 01 02 03 04 05 06 etc.
|
|
* Char0 Attr0 -- -- Char1 Attr1 -- etc.
|
|
*
|
|
* You may set a character and its associated attribute byte
|
|
* with a single word-access, or you may perform to byte writes
|
|
* for the char and attribute. Each 2. word has no meaning,
|
|
* and writes to theese locations are ignored.
|
|
*
|
|
* The attribute byte for each character has the following
|
|
* structure:
|
|
*
|
|
* Bit 7 6 5 4 3 2 1 0
|
|
* BLINK BACK2 BACK1 BACK0 FORE3 FORE2 FORE1 FORE0
|
|
*
|
|
* Were FORE is the foreground-color index (0-15) and
|
|
* BACK is the background color index (0-7). BLINK
|
|
* enables blinking for the associated character.
|
|
* The higher 8 colors in the standard palette are
|
|
* lighter than the lower 8, so you may see FORE3 as
|
|
* an intensity bit. If FORE == 1 or FORE == 9 and
|
|
* BACK == 0 the character is underlined. Since I don't
|
|
* think this looks good, it will probably change in a
|
|
* future release.
|
|
*
|
|
* There's no routine "SetChar" or "SetAttr" provided,
|
|
* because I think it's so trivial... a function call
|
|
* would be pure overhead. As an example, a routine
|
|
* to set the char code and attribute at position x,y:
|
|
* (assumed the value returned by RZ3Init was stored
|
|
* into "DispMem", the actual MonDef struct * is hold
|
|
* in "MDef")
|
|
*
|
|
* void SetChar(unsigned char chr, unsigned char attr,
|
|
* unsigned short x, unsigned short y) {
|
|
*
|
|
* unsigned struct MonDef * md = MDef;
|
|
* unsigned char * c = DispMem + x*4 + y*md->TX*4;
|
|
*
|
|
* *c++ = chr;
|
|
* *c = attr;
|
|
*
|
|
* }
|
|
*
|
|
* In gfx-mode, the memory organisation is rather simple,
|
|
* 1 byte per pixel in 256-color mode, one pixel after
|
|
* each other, line by line.
|
|
*
|
|
* When 16-bits per pixel are used, each two bytes represent
|
|
* one pixel. The meaning of the bits is the following:
|
|
*
|
|
* Bit 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
|
|
* Component g2 g1 g0 b4 b3 b2 b1 b0 r4 r3 r2 r1 r0 g5 g4 g3
|
|
*
|
|
* Please note that the memory layout in gfx-mode depends
|
|
* on the logical screen-size, panning does only affect
|
|
* the appearance of the physical screen.
|
|
*
|
|
* Currently, RZ3Init() disables the Retina Z3 VBLANK IRQ,
|
|
* but beware: When running the Retina WB-Emu under
|
|
* AmigaDOS, the VBLANK IRQ is ENABLED...
|
|
*
|
|
*/
|
|
|
|
void RZ3LoadPalette(unsigned char * pal, unsigned char firstcol, unsigned char colors);
|
|
|
|
/*
|
|
* Loads the palette-registers. "pal" points to an array of unsigned char
|
|
* triplets, for the red, green and blue component. "firstcol" determines the
|
|
* number of the first palette-register to load (256 available). "colors" is
|
|
* the number of colors you want to put in the palette registers.
|
|
*/
|
|
|
|
void RZ3SetPalette(unsigned char colornum, unsigned char red, unsigned char green, unsigned char blue);
|
|
|
|
/*
|
|
* Allows you to set a single color in the palette, "colornum" is the number
|
|
* of the palette entry (256 available), "red", "green" and "blue" are the
|
|
* three components.
|
|
*/
|
|
|
|
void RZ3SetCursorPos(unsigned short pos);
|
|
|
|
/*
|
|
* This routine sets the text-mode hardware-cursor position to the screen
|
|
* location pos. pos can be calculated as (x + y * md->TY).
|
|
* Text-mode only!
|
|
*/
|
|
|
|
void RZ3AlphaCopy (unsigned short xs, unsigned short ys,
|
|
unsigned short xd, unsigned short yd,
|
|
unsigned short w, unsigned short h );
|
|
|
|
/*
|
|
* This Routine uses the blitter to perform fast copies
|
|
* in the text-display. The parameters are:
|
|
* xs - source x-coordinate
|
|
* ys - source y-coordinate
|
|
* xd - destination x-coordinate
|
|
* yd - destination y-coordinate
|
|
* w - the width of the area to copy
|
|
* h - the height of the area to copy
|
|
* All coordinates are in characters. RZ3AlphaCopy does not
|
|
* check for boundaries - you've got to make sure that the
|
|
* parameters have sensible values. Text-mode only!
|
|
*/
|
|
|
|
|
|
void RZ3AlphaErase (unsigned short xd, unsigned short yd,
|
|
unsigned short w, unsigned short h );
|
|
|
|
/*
|
|
* RZ3AlphaErase uses the blitter to erase portions of
|
|
* the text-display. The parameters are:
|
|
* xd - destination x-coordinate
|
|
* yd - destination y-coordinate
|
|
* w - the width of the area to erase
|
|
* h - the height of the area to erase
|
|
* All coordinates are in characters. RZ3AlphaCopy does not
|
|
* check for boundaries - you've got to make sure that the
|
|
* parameters have sensible values. Text-mode only!
|
|
*
|
|
* Since the blitter is unable to use a mask-pattern and a
|
|
* certain fill-value at the same time, this routine uses
|
|
* a simple trick: RZ3Init() clears a memory area twice as
|
|
* large as the text-display needs, and RZ3AlphaErase then
|
|
* simply uses RZ3AlphaCopy to copy the desired area from
|
|
* the empty text-screen to the actually displayed screen.
|
|
*/
|
|
|
|
void RZ3BitBlit (struct grf_bitblt * gbb );
|
|
|
|
/*
|
|
* RZ3BitBlit uses the blitter to perform one of 16
|
|
* available logical operations on the display memory,
|
|
* among them ordinary fill- and copy operations.
|
|
* The only parameter is a pointer to a struct grf_bitblt:
|
|
*
|
|
* struct grf_bitblt {
|
|
* unsigned short op; see above definitions of GRFBBOPxxx
|
|
* unsigned short src_x, src_y; upper left corner of source-region
|
|
* unsigned short dst_x, dst_y; upper left corner of dest-region
|
|
* unsigned short w, h; width, height of region
|
|
* unsigned short mask; bitmask to apply
|
|
* };
|
|
*
|
|
* All coordinates are in pixels. RZ3BitBlit does not
|
|
* check for boundaries - you've got to make sure that the
|
|
* parameters have sensible values. 8 bit gfx-mode only!
|
|
*
|
|
* The blitter has a lot more capabilities, which aren't
|
|
* currently used by theese routines, among them color-expanded
|
|
* and text-blits, which can speed up GUIs like X11 a lot.
|
|
* If you've got any idea how to make use of them within
|
|
* your routines, contact me, and I'll implement the necessary
|
|
* blit-operations.
|
|
*/
|
|
|
|
void RZ3BitBlit16( struct grf_bitblt * gbb );
|
|
|
|
/* Does the same as RZ3BitBlit(), but for 16-bit screens */
|
|
|
|
void RZ3SetPanning(unsigned short xoff, unsigned short yoff);
|
|
|
|
/*
|
|
* Moves the logical coordinate (xoff, yoff) to the upper left corner
|
|
* of your screen. Of course, you shouldn't specify excess values that would
|
|
* show garbage in the lower right area of your screen... SetPanning()
|
|
* does NOT check for boundaries.
|
|
* Please read the documentation of RZ3SetHWCloc, too.
|
|
*/
|
|
|
|
void RZ3SetupHWC (unsigned char col1, unsigned col2,
|
|
unsigned char hsx, unsigned char hsy,
|
|
const unsigned long * data);
|
|
|
|
/*
|
|
* Initializes and switches on the hardware-cursor sprite.
|
|
* The parameters are:
|
|
* col1 - the first color
|
|
* col2 - the second color
|
|
* hsx - hot-spot location offset x
|
|
* hsy - hot-spot location offset y
|
|
* data - a pointer to the bitmap data to be used for the sprite
|
|
*
|
|
* The organization of the data is - as always with MSDOS related
|
|
* products - rather strange: The first and the second long-word
|
|
* represent bitplane0 for the first 64 pixels. The following two
|
|
* long-words represent bitplane1 for the first 64 pixels. But
|
|
* the long-words are organized in Intel-fashion, beginning with
|
|
* the least significant byte, ending with the most significant
|
|
* one. The most significant bit of each byte is the leftmost,
|
|
* as one would expect it. Now the weird color-assignments:
|
|
*
|
|
* bitplane0 bitplane1 result
|
|
* 0 0 col2
|
|
* 0 1 col1
|
|
* 1 0 transparent
|
|
* 1 1 background-color XOR 0xff
|
|
*
|
|
* The size of the data has to be 64*64*2/8 = 1024 byte,
|
|
* obviously, the size of the sprite is 64x64 pixels.
|
|
*/
|
|
|
|
|
|
void RZ3DisableHWC (void);
|
|
|
|
/* simply disables the hardware-cursor sprite */
|
|
|
|
void RZ3SetHWCloc (unsigned short x, unsigned short y);
|
|
|
|
/*
|
|
* sets the location of the hardwar-cursor sprite to x,y
|
|
* relative to the logical screen beginning.
|
|
* IMPORTANT: If you use RZ3SetHWCloc() to set the position
|
|
* of the hardware-cursor sprite, all necessary panning is
|
|
* done automatically - you can treat the display without
|
|
* even knowing about the physical screen size that is
|
|
* displayed.
|
|
*/
|
|
|
|
#endif
|
|
|
|
#endif /* RZ3_BSD_h */
|
|
|
|
|
|
/* -------------- START OF CODE -------------- */
|
|
|
|
/* read VGA register */
|
|
#define vgar(ba, reg) (*(((volatile unsigned char *)ba)+reg))
|
|
|
|
/* write VGA register */
|
|
#define vgaw(ba, reg, val) \
|
|
*(((volatile unsigned char *)ba)+reg) = val
|
|
|
|
/*
|
|
* defines for the used register addresses (mw)
|
|
*
|
|
* NOTE: there are some registers that have different addresses when
|
|
* in mono or color mode. We only support color mode, and thus
|
|
* some addresses won't work in mono-mode!
|
|
*/
|
|
|
|
/* General Registers: */
|
|
#define GREG_STATUS0_R 0x03C2
|
|
#define GREG_STATUS1_R 0x03DA
|
|
#define GREG_MISC_OUTPUT_R 0x03CC
|
|
#define GREG_MISC_OUTPUT_W 0x03C2
|
|
#define GREG_FEATURE_CONTROL_R 0x03CA
|
|
#define GREG_FEATURE_CONTROL_W 0x03DA
|
|
#define GREG_POS 0x0102
|
|
|
|
/* Attribute Controller: */
|
|
#define ACT_ADDRESS 0x03C0
|
|
#define ACT_ADDRESS_R 0x03C0
|
|
#define ACT_ADDRESS_W 0x03C0
|
|
#define ACT_ADDRESS_RESET 0x03DA
|
|
#define ACT_ID_PALETTE0 0x00
|
|
#define ACT_ID_PALETTE1 0x01
|
|
#define ACT_ID_PALETTE2 0x02
|
|
#define ACT_ID_PALETTE3 0x03
|
|
#define ACT_ID_PALETTE4 0x04
|
|
#define ACT_ID_PALETTE5 0x05
|
|
#define ACT_ID_PALETTE6 0x06
|
|
#define ACT_ID_PALETTE7 0x07
|
|
#define ACT_ID_PALETTE8 0x08
|
|
#define ACT_ID_PALETTE9 0x09
|
|
#define ACT_ID_PALETTE10 0x0A
|
|
#define ACT_ID_PALETTE11 0x0B
|
|
#define ACT_ID_PALETTE12 0x0C
|
|
#define ACT_ID_PALETTE13 0x0D
|
|
#define ACT_ID_PALETTE14 0x0E
|
|
#define ACT_ID_PALETTE15 0x0F
|
|
#define ACT_ID_ATTR_MODE_CNTL 0x10
|
|
#define ACT_ID_OVERSCAN_COLOR 0x11
|
|
#define ACT_ID_COLOR_PLANE_ENA 0x12
|
|
#define ACT_ID_HOR_PEL_PANNING 0x13
|
|
#define ACT_ID_COLOR_SELECT 0x14
|
|
|
|
/* Graphics Controller: */
|
|
#define GCT_ADDRESS 0x03CE
|
|
#define GCT_ADDRESS_R 0x03CE
|
|
#define GCT_ADDRESS_W 0x03CF
|
|
#define GCT_ID_SET_RESET 0x00
|
|
#define GCT_ID_ENABLE_SET_RESET 0x01
|
|
#define GCT_ID_COLOR_COMPARE 0x02
|
|
#define GCT_ID_DATA_ROTATE 0x03
|
|
#define GCT_ID_READ_MAP_SELECT 0x04
|
|
#define GCT_ID_GRAPHICS_MODE 0x05
|
|
#define GCT_ID_MISC 0x06
|
|
#define GCT_ID_COLOR_XCARE 0x07
|
|
#define GCT_ID_BITMASK 0x08
|
|
|
|
/* Sequencer: */
|
|
#define SEQ_ADDRESS 0x03C4
|
|
#define SEQ_ADDRESS_R 0x03C4
|
|
#define SEQ_ADDRESS_W 0x03C5
|
|
#define SEQ_ID_RESET 0x00
|
|
#define SEQ_ID_CLOCKING_MODE 0x01
|
|
#define SEQ_ID_MAP_MASK 0x02
|
|
#define SEQ_ID_CHAR_MAP_SELECT 0x03
|
|
#define SEQ_ID_MEMORY_MODE 0x04
|
|
#define SEQ_ID_EXTENDED_ENABLE 0x05 /* down from here, all seq registers are NCR extensions */
|
|
#define SEQ_ID_UNKNOWN1 0x06
|
|
#define SEQ_ID_UNKNOWN2 0x07
|
|
#define SEQ_ID_CHIP_ID 0x08
|
|
#define SEQ_ID_UNKNOWN3 0x09
|
|
#define SEQ_ID_CURSOR_COLOR1 0x0A
|
|
#define SEQ_ID_CURSOR_COLOR0 0x0B
|
|
#define SEQ_ID_CURSOR_CONTROL 0x0C
|
|
#define SEQ_ID_CURSOR_X_LOC_HI 0x0D
|
|
#define SEQ_ID_CURSOR_X_LOC_LO 0x0E
|
|
#define SEQ_ID_CURSOR_Y_LOC_HI 0x0F
|
|
#define SEQ_ID_CURSOR_Y_LOC_LO 0x10
|
|
#define SEQ_ID_CURSOR_X_INDEX 0x11
|
|
#define SEQ_ID_CURSOR_Y_INDEX 0x12
|
|
#define SEQ_ID_CURSOR_STORE_HI 0x13 /* manual still wrong here.. argl! */
|
|
#define SEQ_ID_CURSOR_STORE_LO 0x14 /* downto 0x16 */
|
|
#define SEQ_ID_CURSOR_ST_OFF_HI 0x15
|
|
#define SEQ_ID_CURSOR_ST_OFF_LO 0x16
|
|
#define SEQ_ID_CURSOR_PIXELMASK 0x17
|
|
#define SEQ_ID_PRIM_HOST_OFF_HI 0x18
|
|
#define SEQ_ID_PRIM_HOST_OFF_LO 0x19
|
|
#define SEQ_ID_LINEAR_0 0x1A
|
|
#define SEQ_ID_LINEAR_1 0x1B
|
|
#define SEQ_ID_SEC_HOST_OFF_HI 0x1C
|
|
#define SEQ_ID_SEC_HOST_OFF_LO 0x1D
|
|
#define SEQ_ID_EXTENDED_MEM_ENA 0x1E
|
|
#define SEQ_ID_EXT_CLOCK_MODE 0x1F
|
|
#define SEQ_ID_EXT_VIDEO_ADDR 0x20
|
|
#define SEQ_ID_EXT_PIXEL_CNTL 0x21
|
|
#define SEQ_ID_BUS_WIDTH_FEEDB 0x22
|
|
#define SEQ_ID_PERF_SELECT 0x23
|
|
#define SEQ_ID_COLOR_EXP_WFG 0x24
|
|
#define SEQ_ID_COLOR_EXP_WBG 0x25
|
|
#define SEQ_ID_EXT_RW_CONTROL 0x26
|
|
#define SEQ_ID_MISC_FEATURE_SEL 0x27
|
|
#define SEQ_ID_COLOR_KEY_CNTL 0x28
|
|
#define SEQ_ID_COLOR_KEY_MATCH0 0x29
|
|
#define SEQ_ID_COLOR_KEY_MATCH1 0x2A
|
|
#define SEQ_ID_COLOR_KEY_MATCH2 0x2B
|
|
#define SEQ_ID_UNKNOWN6 0x2C
|
|
#define SEQ_ID_CRC_CONTROL 0x2D
|
|
#define SEQ_ID_CRC_DATA_LOW 0x2E
|
|
#define SEQ_ID_CRC_DATA_HIGH 0x2F
|
|
#define SEQ_ID_MEMORY_MAP_CNTL 0x30
|
|
#define SEQ_ID_ACM_APERTURE_1 0x31
|
|
#define SEQ_ID_ACM_APERTURE_2 0x32
|
|
#define SEQ_ID_ACM_APERTURE_3 0x33
|
|
#define SEQ_ID_BIOS_UTILITY_0 0x3e
|
|
#define SEQ_ID_BIOS_UTILITY_1 0x3f
|
|
|
|
/* CRT Controller: */
|
|
#define CRT_ADDRESS 0x03D4
|
|
#define CRT_ADDRESS_R 0x03D5
|
|
#define CRT_ADDRESS_W 0x03D5
|
|
#define CRT_ID_HOR_TOTAL 0x00
|
|
#define CRT_ID_HOR_DISP_ENA_END 0x01
|
|
#define CRT_ID_START_HOR_BLANK 0x02
|
|
#define CRT_ID_END_HOR_BLANK 0x03
|
|
#define CRT_ID_START_HOR_RETR 0x04
|
|
#define CRT_ID_END_HOR_RETR 0x05
|
|
#define CRT_ID_VER_TOTAL 0x06
|
|
#define CRT_ID_OVERFLOW 0x07
|
|
#define CRT_ID_PRESET_ROW_SCAN 0x08
|
|
#define CRT_ID_MAX_SCAN_LINE 0x09
|
|
#define CRT_ID_CURSOR_START 0x0A
|
|
#define CRT_ID_CURSOR_END 0x0B
|
|
#define CRT_ID_START_ADDR_HIGH 0x0C
|
|
#define CRT_ID_START_ADDR_LOW 0x0D
|
|
#define CRT_ID_CURSOR_LOC_HIGH 0x0E
|
|
#define CRT_ID_CURSOR_LOC_LOW 0x0F
|
|
#define CRT_ID_START_VER_RETR 0x10
|
|
#define CRT_ID_END_VER_RETR 0x11
|
|
#define CRT_ID_VER_DISP_ENA_END 0x12
|
|
#define CRT_ID_OFFSET 0x13
|
|
#define CRT_ID_UNDERLINE_LOC 0x14
|
|
#define CRT_ID_START_VER_BLANK 0x15
|
|
#define CRT_ID_END_VER_BLANK 0x16
|
|
#define CRT_ID_MODE_CONTROL 0x17
|
|
#define CRT_ID_LINE_COMPARE 0x18
|
|
#define CRT_ID_UNKNOWN1 0x19 /* are these register really void ? */
|
|
#define CRT_ID_UNKNOWN2 0x1A
|
|
#define CRT_ID_UNKNOWN3 0x1B
|
|
#define CRT_ID_UNKNOWN4 0x1C
|
|
#define CRT_ID_UNKNOWN5 0x1D
|
|
#define CRT_ID_UNKNOWN6 0x1E
|
|
#define CRT_ID_UNKNOWN7 0x1F
|
|
#define CRT_ID_UNKNOWN8 0x20
|
|
#define CRT_ID_UNKNOWN9 0x21
|
|
#define CRT_ID_UNKNOWN10 0x22
|
|
#define CRT_ID_UNKNOWN11 0x23
|
|
#define CRT_ID_UNKNOWN12 0x24
|
|
#define CRT_ID_UNKNOWN13 0x25
|
|
#define CRT_ID_UNKNOWN14 0x26
|
|
#define CRT_ID_UNKNOWN15 0x27
|
|
#define CRT_ID_UNKNOWN16 0x28
|
|
#define CRT_ID_UNKNOWN17 0x29
|
|
#define CRT_ID_UNKNOWN18 0x2A
|
|
#define CRT_ID_UNKNOWN19 0x2B
|
|
#define CRT_ID_UNKNOWN20 0x2C
|
|
#define CRT_ID_UNKNOWN21 0x2D
|
|
#define CRT_ID_UNKNOWN22 0x2E
|
|
#define CRT_ID_UNKNOWN23 0x2F
|
|
#define CRT_ID_EXT_HOR_TIMING1 0x30 /* down from here, all crt registers are NCR extensions */
|
|
#define CRT_ID_EXT_START_ADDR 0x31
|
|
#define CRT_ID_EXT_HOR_TIMING2 0x32
|
|
#define CRT_ID_EXT_VER_TIMING 0x33
|
|
#define CRT_ID_MONITOR_POWER 0x34
|
|
|
|
/* PLL chip (clock frequency synthesizer) I'm guessing here... */
|
|
#define PLL_ADDRESS 0x83c8
|
|
#define PLL_ADDRESS_W 0x83c9
|
|
|
|
|
|
/* Video DAC */
|
|
#define VDAC_ADDRESS 0x03c8
|
|
#define VDAC_ADDRESS_W 0x03c8
|
|
#define VDAC_ADDRESS_R 0x03c7
|
|
#define VDAC_STATE 0x03c7
|
|
#define VDAC_DATA 0x03c9
|
|
#define VDAC_MASK 0x03c6
|
|
|
|
|
|
/* Accelerator Control Menu (memory mapped registers, includes blitter) */
|
|
#define ACM_PRIMARY_OFFSET 0x00
|
|
#define ACM_SECONDARY_OFFSET 0x04
|
|
#define ACM_MODE_CONTROL 0x08
|
|
#define ACM_CURSOR_POSITION 0x0c
|
|
#define ACM_START_STATUS 0x30
|
|
#define ACM_CONTROL 0x34
|
|
#define ACM_RASTEROP_ROTATION 0x38
|
|
#define ACM_BITMAP_DIMENSION 0x3c
|
|
#define ACM_DESTINATION 0x40
|
|
#define ACM_SOURCE 0x44
|
|
#define ACM_PATTERN 0x48
|
|
#define ACM_FOREGROUND 0x4c
|
|
#define ACM_BACKGROUND 0x50
|
|
|
|
|
|
#define WGfx(ba, idx, val) \
|
|
do { vgaw(ba, GCT_ADDRESS, idx); vgaw(ba, GCT_ADDRESS_W , val); } while (0)
|
|
|
|
#define WSeq(ba, idx, val) \
|
|
do { vgaw(ba, SEQ_ADDRESS, idx); vgaw(ba, SEQ_ADDRESS_W , val); } while (0)
|
|
|
|
#define WCrt(ba, idx, val) \
|
|
do { vgaw(ba, CRT_ADDRESS, idx); vgaw(ba, CRT_ADDRESS_W , val); } while (0)
|
|
|
|
#define WAttr(ba, idx, val) \
|
|
do { vgaw(ba, ACT_ADDRESS, idx); vgaw(ba, ACT_ADDRESS_W, val); } while (0)
|
|
|
|
#define Map(m) \
|
|
do { WGfx(ba, GCT_ID_READ_MAP_SELECT, m & 3 ); WSeq(ba, SEQ_ID_MAP_MASK, (1 << (m & 3))); } while (0)
|
|
|
|
#define WPLL(ba, idx, val) \
|
|
do { vgaw(ba, PLL_ADDRESS, idx);\
|
|
vgaw(ba, PLL_ADDRESS_W, (val & 0xff));\
|
|
vgaw(ba, PLL_ADDRESS_W, (val >> 8)); } while (0)
|
|
|
|
|
|
static inline unsigned char RAttr(volatile void * ba, short idx) {
|
|
vgaw (ba, ACT_ADDRESS, idx);
|
|
return vgar (ba, ACT_ADDRESS_R);
|
|
}
|
|
|
|
static inline unsigned char RSeq(volatile void * ba, short idx) {
|
|
vgaw (ba, SEQ_ADDRESS, idx);
|
|
return vgar (ba, SEQ_ADDRESS_R);
|
|
}
|
|
|
|
static inline unsigned char RCrt(volatile void * ba, short idx) {
|
|
vgaw (ba, CRT_ADDRESS, idx);
|
|
return vgar (ba, CRT_ADDRESS_R);
|
|
}
|
|
|
|
static inline unsigned char RGfx(volatile void * ba, short idx) {
|
|
vgaw(ba, GCT_ADDRESS, idx);
|
|
return vgar (ba, GCT_ADDRESS_R);
|
|
}
|
|
|
|
void RZ3DisableHWC(struct grf_softc *gp);
|
|
void RZ3SetupHWC(struct grf_softc *gp, unsigned char col1, unsigned int col2,
|
|
unsigned char hsx, unsigned char hsy,
|
|
const long unsigned int *data);
|
|
void RZ3AlphaErase(struct grf_softc *gp,
|
|
short unsigned int xd, short unsigned int yd,
|
|
short unsigned int w, short unsigned int h);
|
|
void RZ3AlphaCopy(struct grf_softc *gp,
|
|
short unsigned int xs, short unsigned int ys,
|
|
short unsigned int xd, short unsigned int yd,
|
|
short unsigned int w, short unsigned int h);
|
|
void RZ3BitBlit(struct grf_softc *gp, struct grf_bitblt *gbb);
|
|
void RZ3BitBlit16(struct grf_softc *gp, struct grf_bitblt *gbb);
|
|
void RZ3BitBlit24(struct grf_softc *gp, struct grf_bitblt *gbb);
|
|
void RZ3SetCursorPos(struct grf_softc *gp, short unsigned int pos);
|
|
void RZ3LoadPalette(struct grf_softc *gp, unsigned char *pal,
|
|
unsigned char firstcol, unsigned char colors);
|
|
void RZ3SetPalette(struct grf_softc *gp, unsigned char colornum,
|
|
unsigned char red, unsigned char green,
|
|
unsigned char blue);
|
|
void RZ3SetPanning(struct grf_softc *gp,
|
|
short unsigned int xoff, short unsigned int yoff);
|
|
void RZ3SetHWCloc(struct grf_softc *gp,
|
|
short unsigned int x, short unsigned int y);
|
|
int rh_mode(register struct grf_softc *gp, u_long cmd, void *arg,
|
|
u_long a2, int a3);
|
|
int rh_ioctl(register struct grf_softc *gp, u_long cmd, void *data);
|
|
int rh_getcmap(struct grf_softc *gfp, struct grf_colormap *cmap);
|
|
int rh_putcmap(struct grf_softc *gfp, struct grf_colormap *cmap);
|
|
int rh_getspritepos(struct grf_softc *gp, struct grf_position *pos);
|
|
int rh_setspritepos(struct grf_softc *gp, struct grf_position *pos);
|
|
int rh_getspriteinfo(struct grf_softc *gp, struct grf_spriteinfo *info);
|
|
int rh_setspriteinfo(struct grf_softc *gp, struct grf_spriteinfo *info);
|
|
int rh_getspritemax(struct grf_softc *gp, struct grf_position *pos);
|
|
int rh_bitblt(struct grf_softc *gp, struct grf_bitblt *bb);
|
|
int rh_blank(struct grf_softc *, int *);
|
|
|
|
struct ite_softc;
|
|
void rh_init(struct ite_softc *);
|
|
void rh_cursor(struct ite_softc *, int);
|
|
void rh_deinit(struct ite_softc *);
|
|
void rh_putc(struct ite_softc *, int, int, int, int);
|
|
void rh_clear(struct ite_softc *, int, int, int, int);
|
|
void rh_scroll(struct ite_softc *, int, int, int, int);
|
|
|
|
int grfrh_cnprobe(void);
|
|
void grfrh_iteinit(struct grf_softc *);
|
|
|
|
#endif /* _GRF_RHREG_H */
|