NetBSD/sys/arch/evbarm/g42xxeb/gb225reg.h

76 lines
2.9 KiB
C

/* $NetBSD: gb225reg.h,v 1.2 2005/12/11 12:17:08 christos Exp $ */
/*
* Copyright (c) 2002 Genetec corp. All rights reserved.
* Written by Hiroyuki Bessho for Genetec corp.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of Genetec corp. may not be used to endorse
* or promote products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY GENETEC CORP. ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL GENETEC CORP.
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _EVBARM_GB225_REG_H
#define _EVBARM_GB225_REG_H
#include <arm/xscale/pxa2x0reg.h>
#define GB225_PLDREG_BASE PXA2X0_CS4_START
#define GB225_PLDREG_SIZE 0x0a
#define GB225_CFDET 0 /* CompactFlash slot card detect */
#define GB225_PCMCIADET 2 /* PCMCIA slot card detect */
#define CARDDET_DET 0x03
#define CARDDET_BVD1 (1<<2)
#define CARDDET_BVD2 (1<<3)
#define CARDDET_NVS1 (1<<4)
#define CARDDET_NVS2 (1<<5)
#define CARDDET_NOCARD 0x3f
#define GB225_CARDPOW 4 /* card power supply control */
#define CARDPOW_PCMCIA_SHIFT 0
#define CARDPOW_CF_SHIFT 4
#define CARDPOW_VPP0 0x00
#define CARDPOW_VPP12 0x01
#define CARDPOW_VPPVCC 0x02
#define CARDPOW_VPPHIZ 0x03
#define CARDPOW_VCC0 0x00
#define CARDPOW_VCC33 0x04 /* 3.3V */
#define CARDPOW_VCC5 0x08
#define CARDPOW_MASK 0x0f
#define CARDPOW_VPPMASK 0x03
#define CARDPOW_VCCMASK 0x0c
#define GB225_IRDA_CONT 6 /* IrDA control */
#define IRDACONT_SIRFULL 0
#define IRDACONT_SHUTDOWN 1
#define IRDACONT_SIR2 2 /* 2/3 */
#define IRDACONT_SIR1 3 /* 1/3 */
#define IRDACONT_FIRFULL 4
#define IRDACONT_FIR2 6 /* 2/3 */
#define IRDACONT_FIR1 7 /* 1/3 */
#define GB225_DEVERROR 8
#define DEVERROR_CARD (1<<0) /* CF/PCMCIA power failure */
#define DEVERROR_USB (1<<1) /* USB power failure */
#endif /* _EVBARM_GB225_REG_H */