NetBSD/sys/netinet/if_atm.c
ozaki-r 2cf7873b92 Constify rtentry of if_output
We no longer need to change rtentry below if_output.

The change makes it clear where rtentries are changed (or not)
and helps forthcoming locking (os psrefing) rtentries.
2016-04-28 00:16:56 +00:00

262 lines
6.8 KiB
C

/* $NetBSD: if_atm.c,v 1.38 2016/04/28 00:16:56 ozaki-r Exp $ */
/*
* Copyright (c) 1996 Charles D. Cranor and Washington University.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* IP <=> ATM address resolution.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: if_atm.c,v 1.38 2016/04/28 00:16:56 ozaki-r Exp $");
#ifdef _KERNEL_OPT
#include "opt_inet.h"
#include "opt_natm.h"
#endif
#if defined(INET) || defined(INET6)
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/time.h>
#include <sys/kernel.h>
#include <sys/errno.h>
#include <sys/ioctl.h>
#include <sys/syslog.h>
#include <sys/proc.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/route.h>
#include <net/if_atm.h>
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/if_atm.h>
#ifdef NATM
#include <netnatm/natm.h>
#endif
/*
* atm_rtrequest: handle ATM rt request (in support of generic code)
* inputs: "req" = request code
* "rt" = route entry
* "sa" = sockaddr
*/
void
atm_rtrequest(int req, struct rtentry *rt, const struct rt_addrinfo *info)
{
struct sockaddr *gate = rt->rt_gateway;
struct atm_pseudoioctl api;
#ifdef NATM
const struct sockaddr_in *sin;
struct natmpcb *npcb = NULL;
const struct atm_pseudohdr *aph;
#endif
const struct ifnet *ifp = rt->rt_ifp;
uint8_t namelen = strlen(ifp->if_xname);
uint8_t addrlen = ifp->if_addrlen;
if (rt->rt_flags & RTF_GATEWAY) /* link level requests only */
return;
switch (req) {
case RTM_ADD:
/*
* route added by a command (e.g. ifconfig, route, arp...).
*
* first check to see if this is not a host route, in which
* case we are being called via "ifconfig" to set the address.
*/
if ((rt->rt_flags & RTF_HOST) == 0) {
union {
struct sockaddr sa;
struct sockaddr_dl sdl;
struct sockaddr_storage ss;
} u;
sockaddr_dl_init(&u.sdl, sizeof(u.ss),
ifp->if_index, ifp->if_type,
NULL, namelen, NULL, addrlen);
rt_setgate(rt, &u.sa);
gate = rt->rt_gateway;
break;
}
if (gate->sa_family != AF_LINK ||
gate->sa_len < sockaddr_dl_measure(namelen, addrlen)) {
log(LOG_DEBUG, "atm_rtrequest: bad gateway value\n");
break;
}
#ifdef DIAGNOSTIC
if (rt->rt_ifp->if_ioctl == NULL) panic("atm null ioctl");
#endif
#ifdef NATM
/*
* let native ATM know we are using this VCI/VPI
* (i.e. reserve it)
*/
sin = satocsin(rt_getkey(rt));
if (sin->sin_family != AF_INET)
goto failed;
aph = (const struct atm_pseudohdr *)CLLADDR(satosdl(gate));
npcb = npcb_add(NULL, rt->rt_ifp, ATM_PH_VCI(aph),
ATM_PH_VPI(aph));
if (npcb == NULL)
goto failed;
npcb->npcb_flags |= NPCB_IP;
npcb->ipaddr.s_addr = sin->sin_addr.s_addr;
/* XXX: move npcb to llinfo when ATM ARP is ready */
rt->rt_llinfo = (void *) npcb;
#endif
/*
* let the lower level know this circuit is active
*/
memcpy(&api.aph, CLLADDR(satocsdl(gate)), sizeof(api.aph));
api.rxhand = NULL;
if (rt->rt_ifp->if_ioctl(rt->rt_ifp, SIOCATMENA, &api) != 0) {
printf("atm: couldn't add VC\n");
goto failed;
}
satosdl(gate)->sdl_type = rt->rt_ifp->if_type;
satosdl(gate)->sdl_index = rt->rt_ifp->if_index;
break;
failed:
#ifdef NATM
if (npcb) {
npcb_free(npcb, NPCB_DESTROY);
rt->rt_llinfo = NULL;
}
#endif
rtrequest(RTM_DELETE, rt_getkey(rt), NULL,
rt_mask(rt), 0, NULL);
break;
case RTM_DELETE:
/*
* tell the lower layer to disable this circuit
*/
memcpy(&api.aph, CLLADDR(satocsdl(gate)), sizeof(api.aph));
api.rxhand = NULL;
(void)rt->rt_ifp->if_ioctl(rt->rt_ifp, SIOCATMDIS, &api);
break;
}
}
/*
* atmresolve:
* inputs:
* [1] "rt" = the link level route to use (or null if need to look one up)
* [2] "m" = mbuf containing the data to be sent
* [3] "dst" = sockaddr_in (IP) address of dest.
* output:
* [4] "desten" = ATM pseudo header which we will fill in VPI/VCI info
* return:
* 0 == resolve FAILED; note that "m" gets m_freem'd in this case
* 1 == resolve OK; desten contains result
*
* XXX: will need more work if we wish to support ATMARP in the kernel,
* but this is enough for PVCs entered via the "route" command.
*/
int
atmresolve(const struct rtentry *rt0, struct mbuf *m, const struct sockaddr *dst,
struct atm_pseudohdr *desten /* OUT */)
{
const struct sockaddr_dl *sdl;
struct rtentry *rt = NULL;
if (m->m_flags & (M_BCAST|M_MCAST)) {
log(LOG_INFO, "atmresolve: BCAST/MCAST packet detected/dumped\n");
goto bad;
}
if (rt0 == NULL) {
rt = RTALLOC1(dst, 0);
if (rt == NULL)
goto bad; /* failed */
if ((rt->rt_flags & RTF_GATEWAY) != 0 ||
/* XXX: are we using LLINFO? */
rt->rt_gateway->sa_family != AF_LINK) {
rtfree(rt);
goto bad;
}
}
/*
* note that rt_gateway is a sockaddr_dl which contains the
* atm_pseudohdr data structure for this route. we currently
* don't need any rt_llinfo info (but will if we want to support
* ATM ARP [c.f. if_ether.c]).
*/
sdl = satocsdl((rt ? rt : rt0)->rt_gateway);
/*
* Check the address family and length is valid, the address
* is resolved; otherwise, try to resolve.
*/
if (sdl->sdl_family == AF_LINK && sdl->sdl_alen == sizeof(*desten)) {
memcpy(desten, CLLADDR(sdl), sdl->sdl_alen);
if (rt != NULL)
rtfree(rt);
return (1); /* ok, go for it! */
}
if (rt != NULL)
rtfree(rt);
/*
* we got an entry, but it doesn't have valid link address
* info in it (it is prob. the interface route, which has
* sdl_alen == 0). dump packet. (fall through to "bad").
*/
bad:
m_freem(m);
return (0);
}
#endif /* INET */