159 lines
6.4 KiB
Plaintext
159 lines
6.4 KiB
Plaintext
Last update: Sun Mar 13 15:05:31 PST 1994
|
|
|
|
This file hopefully describes the whatever and however of how to get xntp
|
|
running on hpux 7.0 and later s300. s400, s700, and s800.
|
|
|
|
First off, all the standard disclaimers hold here ... HP doesn't have anthing
|
|
to do with this stuff. I fool with it in my spare time because we use it and
|
|
because I like to. We just happen to have a lot of HP machines around here :-)
|
|
Xntpd has been in use here for several years and has a fair amount of mileage
|
|
on various HP platforms within the company. I can't really guarantee bug fixes
|
|
but I'd certainly like to hear about bugs and I won't hestitate to look at
|
|
any fixes sent to me.
|
|
|
|
Now lets talk OS. If you don't have 7.0 or later, pretty much hang it up now.
|
|
This stuff has run here on pretty much everything from 8.0 upward on s300,
|
|
s700, and s800. It is known to run on 7.0 s300/s400 but all reports are
|
|
from the field and not my personal experience.
|
|
|
|
If you are lucky enough to have a s300 or s400 with 9.03, then you no longer
|
|
have to worry about adjtimed as HP-UX now has adjtime(2). The rest of you
|
|
will have to wait on 10.0 which will have adjtime(2) and a supported though
|
|
a bit older version of xntpd.
|
|
|
|
Next, let me explain a bit about how this stuff works on HP-UX's that do not
|
|
have adjtime(2). The directory adjtime contains libadjtime.a and the adjtimed
|
|
daemon. Instead of the adjtime(2) system call, we use a library routine to
|
|
talk to adjtimed thru message queues. Adjtimed munges into /dev/kmem and
|
|
causes the clock to skew properly as needed. PLEASE NOTE that the adjtime
|
|
code provided here is NOT a general replacement for adjtime(2) ... use of
|
|
this adjtime(3)/adjtimed(8) other than with xntpd may yield very odd results.
|
|
|
|
What to do to get this stuff running ?
|
|
|
|
* If you are running an OS less than 10.0 or do not have a s300/s400
|
|
with 9.03 or better
|
|
-> cd machines
|
|
-> vi hpux
|
|
-> (change -DSYS_HPUX=? to match whatever you are running [7,8,9])
|
|
-> cd ..
|
|
|
|
* Say "make makeconfig"
|
|
|
|
* Say "make", sit back for a few minutes.
|
|
|
|
* cd authstuff
|
|
* Say "./authcert < certdata" and check the output. Every line should
|
|
end with "OK" ... if not, we got trouble.
|
|
* Now try "./authspeed auth.samplekeys". What we want to
|
|
remember here is the "authentication delay in CPU time"
|
|
* cd ..
|
|
|
|
* Say "make install"
|
|
|
|
* I'd suggest reading the xntp docs about now :-) ... seriously !!
|
|
|
|
* One thing I have added to this version of xntpd is a way to select
|
|
config files if you are sharing /usr/local thru NFS or whatever.
|
|
If the file /usr/local/etc/xntp.conf happens to be a directory, the
|
|
files in that directory are searched until a match is found. The
|
|
rules for a match are:
|
|
|
|
1. Our hostname
|
|
2. default.<machine id> (as in default.375 or default.850)
|
|
3. default
|
|
|
|
* Ok, make sure adjtimed is running (just start it up for now with
|
|
"/usr/local/etc/adjtimed"). Using -z as an option will get you
|
|
a usage message.
|
|
|
|
* Now start up xntpd and watch it work.
|
|
|
|
* Make sure that adjtimed gets started at boot right before xntpd.
|
|
We do this in /etc/netbsdsrc. They must both run as root !!
|
|
|
|
Possible problems ?
|
|
|
|
* On some 320's and 835's we have had to run adjtimed with "-p 45" or
|
|
so to get rid of syslog messages about "last adjust did not finish".
|
|
|
|
* At 9.0, there is a problem with DIAGMON (patch available from the
|
|
response center) which causes it to delete the message queue that
|
|
adjtimed/xntpd use to communicate. (see next note for result)
|
|
|
|
* Xntpd has been known to get really ticked off when adjtime() fails
|
|
which is usually only while running the emulation code on HP-UX.
|
|
When it gets mad, it usually jumps the clock into never never land.
|
|
Possible reasons for this are adjtimed being killed or just never
|
|
started or adjtimed being completely swapped out on a really busy
|
|
machine (newer adjtimed try to lock themselves in memory to prevent
|
|
this one).
|
|
|
|
Anything else ... just drop me a line at ken@sdd.hp.com
|
|
|
|
Received: from louie.udel.edu by huey.udel.edu id aa14418; 15 Jun 95 9:19 EDT
|
|
Received: from host5.colby.edu (host-05.colby.edu) by host-04.colby.edu with ESMTP (1.37.109.15/Colby 1.1)
|
|
id AA165442355; Thu, 15 Jun 1995 09:19:16 -0400
|
|
Received: by host5.colby.edu (1.37.109.15/Colby 1.1)
|
|
id AA056252339; Thu, 15 Jun 1995 09:18:59 -0400
|
|
Date: Thu, 15 Jun 1995 09:18:59 -0400 (EDT)
|
|
From: "Jeff A. Earickson" <jaearick@colby.edu>
|
|
To: Mills@huey.udel.edu
|
|
Subject: More minor bugs in xntp3.4s
|
|
In-Reply-To: <9506150022.aa12727@huey.udel.edu>
|
|
Message-Id: <Pine.HPP.3.91.950615083549.4557A-100000@host5.colby.edu>
|
|
Mime-Version: 1.0
|
|
Content-Type: TEXT/PLAIN; charset=US-ASCII
|
|
|
|
Dave,
|
|
After reading the hpux hints file, I realized I didn't install or
|
|
start adjtimed. In the course of doing this, I discovered that:
|
|
|
|
--> $(TOP) is not defined in adjtime/Makefile, so "make install" can't
|
|
find the install.sh script.
|
|
|
|
--> "make install" from the main Makefile never goes into the adjtime
|
|
directory, so I added the following two lines into the install
|
|
target of the main Makefile:
|
|
|
|
@echo installing from adjtime
|
|
@cd adjtime && $(MAKE) $(MFLAGS) MFLAGS="$(MFLAGS)" MAKE="$(MAKE)" install
|
|
|
|
This twiddle may not be right for all systems, but it got adjtimed
|
|
installed for me.
|
|
|
|
You might also want to add to the hpux hints file that one way to
|
|
fire things up at boot time is to add the following lines to the localrc
|
|
function of /etc/rc:
|
|
|
|
#---daemons for Network Time Protocol (version 3.4s)
|
|
#---note that adjtimed is only needed for HP-UX 9.X, not 10.0
|
|
#---adjtimed must be running or xntpd won't work right...
|
|
if [ -x /usr/local/bin/adjtimed ]; then
|
|
/usr/local/bin/adjtimed -r & echo -n ' adjtimed'
|
|
if [ -x /usr/local/bin/xntpd ]; then
|
|
/usr/local/bin/xntpd & echo -n ' xntpd'
|
|
fi
|
|
fi
|
|
|
|
I discovered that the "-r" option of adjtimed is needed to clear out any
|
|
trash from a previous execution of it. Otherwise adjtimed quietly dies
|
|
and leaves xntpd in the lurch...
|
|
|
|
Thanks for the help.
|
|
|
|
** Jeff A. Earickson, Ph.D PHONE: 207-872-3659
|
|
** Senior UNIX Sysadmin, Information Technology EMAIL: jaearick@colby.edu
|
|
** Colby College, 4214 Mayflower Hill, FAX: 207-872-3555
|
|
** Waterville ME, 04901-8842
|
|
|
|
On Thu, 15 Jun 1995 Mills@huey.udel.edu wrote:
|
|
|
|
> Jeff,
|
|
>
|
|
> Read the hpux file in the hints directory.
|
|
>
|
|
> Dave
|
|
>
|
|
|