772 lines
25 KiB
Plaintext
772 lines
25 KiB
Plaintext
# $NetBSD: GENERIC_LAPTOP,v 1.60 2002/10/01 12:56:41 fvdl Exp $
|
|
# From: NetBSD: GENERIC,v 1.414 2001/07/30 19:59:05 ad Exp
|
|
#
|
|
# GENERIC_LAPTOP -- GENERIC with cardbus and some USB devices enabled
|
|
#
|
|
|
|
include "arch/i386/conf/std.i386"
|
|
|
|
#options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
|
|
|
#ident "GENERIC-$Revision: 1.60 $"
|
|
|
|
maxusers 32 # estimated number of users
|
|
|
|
# CPU support. At least one is REQUIRED.
|
|
options I386_CPU
|
|
options I486_CPU
|
|
options I586_CPU
|
|
options I686_CPU
|
|
|
|
# CPU-related options.
|
|
options MATH_EMULATE # floating point emulation
|
|
options VM86 # virtual 8086 emulation
|
|
options USER_LDT # user-settable LDT; used by WINE
|
|
# eliminate delay no-ops in I/O; recommended on all but very old machines
|
|
#options DUMMY_NOPS
|
|
|
|
options MTRR # memory-type range register syscall support
|
|
#options PERFCTRS # performance-monitoring counters support
|
|
|
|
# delay between "rebooting ..." message and hardware reset, in milliseconds
|
|
#options CPURESET_DELAY=2000
|
|
|
|
# This option allows you to force a serial console at the specified
|
|
# I/O address. see console(4) for details.
|
|
#options CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
|
|
# you don't want the option below ON iff you are using the
|
|
# serial console option of the new boot strap code.
|
|
#options CONS_OVERRIDE # Always use above! independent of boot info
|
|
|
|
# The following options override the memory sizes passed in from the boot
|
|
# block. Use them *only* if the boot block is unable to determine the correct
|
|
# values. Note that the BIOS may *correctly* report less than 640k of base
|
|
# memory if the extended BIOS data area is located at the top of base memory
|
|
# (as is the case on most recent systems).
|
|
#options REALBASEMEM=639 # size of base memory (in KB)
|
|
#options REALEXTMEM=15360 # size of extended memory (in KB)
|
|
|
|
# Standard system options
|
|
|
|
options UCONSOLE # users can use TIOCCONS (for xconsole)
|
|
options INSECURE # disable kernel security levels - X needs this
|
|
|
|
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
|
|
options NTP # NTP phase/frequency locked loop
|
|
|
|
options KTRACE # system call tracing via ktrace(1)
|
|
|
|
options SYSVMSG # System V-like message queues
|
|
options SYSVSEM # System V-like semaphores
|
|
#options SEMMNI=10 # number of semaphore identifiers
|
|
#options SEMMNS=60 # number of semaphores in system
|
|
#options SEMUME=10 # max number of undo entries per process
|
|
#options SEMMNU=30 # number of undo structures in system
|
|
options SYSVSHM # System V-like memory sharing
|
|
#options SHMMAXPGS=2048 # 2048 pages is the default
|
|
|
|
options LKM # loadable kernel modules
|
|
|
|
options USERCONF # userconf(4) support
|
|
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
|
|
|
# Diagnostic/debugging support options
|
|
#options DIAGNOSTIC # expensive kernel consistency checks
|
|
#options DEBUG # expensive debugging checks/support
|
|
#options KMEMSTATS # kernel memory statistics (vmstat -m)
|
|
options DDB # in-kernel debugger
|
|
options DDB_HISTORY_SIZE=512 # enable history editing in DDB
|
|
#options KGDB # remote debugger
|
|
#options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
|
|
#makeoptions DEBUG="-g" # compile full symbol table
|
|
|
|
# Compatibility options
|
|
options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8,
|
|
options COMPAT_09 # NetBSD 0.9,
|
|
options COMPAT_10 # NetBSD 1.0,
|
|
options COMPAT_11 # NetBSD 1.1,
|
|
options COMPAT_12 # NetBSD 1.2,
|
|
options COMPAT_13 # NetBSD 1.3,
|
|
options COMPAT_14 # NetBSD 1.4,
|
|
options COMPAT_15 # NetBSD 1.5,
|
|
options COMPAT_43 # and 4.3BSD
|
|
options COMPAT_386BSD_MBRPART # recognize old partition ID
|
|
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
|
|
|
options COMPAT_SVR4 # binary compatibility with SVR4
|
|
options COMPAT_IBCS2 # binary compatibility with SCO and ISC
|
|
options COMPAT_LINUX # binary compatibility with Linux
|
|
options COMPAT_FREEBSD # binary compatibility with FreeBSD
|
|
#options COMPAT_MACH # binary compatibility with Mach binaries
|
|
#options EXEC_MACHO # exec MACH-O binaries
|
|
#options COMPAT_PECOFF # kernel support to run Win32 apps
|
|
|
|
# File systems
|
|
file-system FFS # UFS
|
|
file-system EXT2FS # second extended file system (linux)
|
|
file-system LFS # log-structured file system
|
|
file-system MFS # memory file system
|
|
file-system NFS # Network File System client
|
|
file-system NTFS # Windows/NT file system (experimental)
|
|
file-system CD9660 # ISO 9660 + Rock Ridge file system
|
|
file-system MSDOSFS # MS-DOS file system
|
|
file-system FDESC # /dev/fd
|
|
file-system KERNFS # /kern
|
|
file-system NULLFS # loopback file system
|
|
file-system OVERLAY # overlay file system
|
|
file-system PORTAL # portal filesystem (still experimental)
|
|
file-system PROCFS # /proc
|
|
file-system UMAPFS # NULLFS + uid and gid remapping
|
|
file-system UNION # union file system
|
|
file-system CODA # Coda File System; also needs vcoda (below)
|
|
|
|
# File system options
|
|
options QUOTA # UFS quotas
|
|
#options FFS_EI # FFS Endian Independent support
|
|
options SOFTDEP # FFS soft updates support.
|
|
options NFSSERVER # Network File System server
|
|
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
|
|
# immutable) behave as system flags.
|
|
|
|
# Networking options
|
|
#options GATEWAY # packet forwarding
|
|
options INET # IP + ICMP + TCP + UDP
|
|
options INET6 # IPV6
|
|
#options IPSEC # IP security
|
|
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
|
#options IPSEC_DEBUG # debug for IP security
|
|
#options MROUTING # IP multicast routing
|
|
options NS # XNS
|
|
#options NSIP # XNS tunneling over IP
|
|
options ISO,TPIP # OSI
|
|
#options EON # OSI tunneling over IP
|
|
options CCITT,LLC,HDLC # X.25
|
|
options NETATALK # AppleTalk networking protocols
|
|
options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
|
options PPP_DEFLATE # Deflate compression support for PPP
|
|
options PPP_FILTER # Active filter support for PPP (requires bpf)
|
|
options PFIL_HOOKS # pfil(9) packet filter hooks
|
|
options IPFILTER_LOG # ipmon(8) log support
|
|
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
|
|
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
|
|
|
# These options enable verbose messages for several subsystems.
|
|
# Warning, these may compile large string tables into the kernel!
|
|
options MIIVERBOSE # verbose PHY autoconfig messages
|
|
options PCIVERBOSE # verbose PCI device autoconfig messages
|
|
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
|
|
#options PCMCIAVERBOSE # verbose PCMCIA configuration messages
|
|
options SCSIVERBOSE # human readable SCSI error messages
|
|
options USBVERBOSE # verbose USB device autoconfig messages
|
|
#options PNPBIOSVERBOSE # verbose PnP BIOS messages
|
|
#options PNPBIOSDEBUG # more fulsome PnP BIOS debugging messages
|
|
|
|
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
|
|
|
|
#
|
|
# wscons options
|
|
#
|
|
# builtin terminal emulations
|
|
#options WSEMUL_SUN # sun terminal emulation
|
|
options WSEMUL_VT100 # VT100 / VT220 emulation
|
|
# different kernel output - see dev/wscons/wsdisplayvar.h
|
|
options WS_KERNEL_FG=WSCOL_GREEN
|
|
#options WS_KERNEL_BG=WSCOL_BLACK
|
|
# compatibility to other console drivers
|
|
options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
|
|
options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
|
|
options WSDISPLAY_COMPAT_USL # VT handling
|
|
options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
|
|
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
|
|
#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
|
|
# allocate a number of virtual screens at autoconfiguration time
|
|
#options WSDISPLAY_DEFAULTSCREENS=4
|
|
# use a large software cursor that doesn't blink
|
|
options PCDISPLAY_SOFTCURSOR
|
|
# modify the screen type of the console; defaults to "80x25"
|
|
#options VGA_CONSOLE_SCREENTYPE="\"80x24\""
|
|
|
|
# Kernel root file system and dump configuration.
|
|
config netbsd root on ? type ?
|
|
#config netbsd root on sd0a type ffs
|
|
#config netbsd root on ? type nfs
|
|
|
|
#
|
|
# Device configuration
|
|
#
|
|
|
|
mainbus0 at root
|
|
|
|
cpu0 at mainbus0
|
|
#ioapic* at mainbus?
|
|
|
|
apm0 at mainbus0 # Advanced power management
|
|
|
|
# Tuning for power management, see apm(4) for more details.
|
|
#options APM_NO_IDLE # Don't call BIOS CPU idle function
|
|
#options APM_V10_ONLY # Use only the APM 1.0 calls
|
|
#options APM_NO_POWEROFF # Don't power off on halt(8)
|
|
#options APM_POWER_PRINT # Print stats on the console
|
|
#options APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts
|
|
|
|
|
|
# Basic Bus Support
|
|
|
|
# Plug-and-Play BIOS and attached devices
|
|
|
|
#pnpbios* at mainbus?
|
|
|
|
# mainboard audio chips
|
|
#ess* at pnpbios? index ? # ESS AudioDrive
|
|
#sb* at pnpbios? index ? # NeoMagic 256AV in sb mode
|
|
#wss* at pnpbios? index ? # NeoMagic 256AV in wss mode
|
|
#ym* at pnpbios? index ? # OPL3-SA3
|
|
|
|
# com port
|
|
# If enabled, consider changing "com0", "com1", and "com2" under "ISA Serial
|
|
# Interfaces" to "com*", otherwise com2 will attach at pnpbios? and there
|
|
# will be no com0. A side effect is pcmcia (and other) com? previously
|
|
# starting at com3 may attach as com1 or com2.
|
|
#com* at pnpbios? index ? # serial ports
|
|
|
|
# parallel port
|
|
# The above "com*" comments apply, cf. "lpt0" under "ISA parallel
|
|
# "printer interfaces".
|
|
#lpt* at pnpbios? index ? # parallel ports
|
|
|
|
#pckbc* at pnpbios? index ? # PC keyboard/mouse controller
|
|
#fdc* at pnpbios? index ? # floppy controller
|
|
|
|
# IDE controller on Toshiba Portege 3000 series (crippled PCI device)
|
|
#pciide* at pnpbios? index ?
|
|
|
|
# PCI bus support
|
|
pci* at mainbus? bus ?
|
|
pci* at pchb? bus ?
|
|
pci* at ppb? bus ?
|
|
|
|
# Configure PCI using BIOS information
|
|
options PCIBIOS # PCI BIOS support
|
|
options PCIBIOSVERBOSE # PCI BIOS verbose info
|
|
options PCIBIOS_ADDR_FIXUP # fixup PCI I/O addresses
|
|
options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering
|
|
options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing
|
|
#options PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11
|
|
options PCIBIOS_INTR_GUESS # see pcibios(4)
|
|
#options PCIINTR_DEBUG # super-verbose PCI interrupt fixup
|
|
|
|
# PCI bridges
|
|
pchb* at pci? dev ? function ? # PCI-Host bridges
|
|
pcib* at pci? dev ? function ? # PCI-ISA bridges
|
|
ppb* at pci? dev ? function ? # PCI-PCI bridges
|
|
# XXX 'puc's aren't really bridges, but there's no better place for them here
|
|
puc* at pci? dev ? function ? # PCI "universal" comm. cards
|
|
|
|
agp* at pchb?
|
|
|
|
# ISA bus support
|
|
isa0 at mainbus?
|
|
isa0 at pcib?
|
|
|
|
# PCMCIA bus support
|
|
pcmcia* at pcic? controller ? socket ?
|
|
pcmcia* at tcic? controller ? socket ?
|
|
|
|
# ISA PCMCIA controllers
|
|
pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
|
|
pcic1 at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000
|
|
pcic2 at isa? port 0x3e4 iomem 0xe0000 iosiz 0x4000
|
|
tcic0 at isa? port 0x240 iomem 0xd0000 iosiz 0x10000
|
|
|
|
# PCI PCMCIA controllers
|
|
pcic0 at pci? dev? function ?
|
|
|
|
# ISA Plug-and-Play bus support
|
|
isapnp0 at isa?
|
|
|
|
# ISA Plug-and-Play PCMCIA controllers
|
|
pcic* at isapnp?
|
|
|
|
# CardBus bridge support
|
|
cbb* at pci? dev ? function ?
|
|
cardslot* at cbb?
|
|
|
|
# CardBus bus support
|
|
cardbus* at cardslot?
|
|
pcmcia* at cardslot?
|
|
|
|
# Coprocessor Support
|
|
|
|
# Math Coprocessor support
|
|
npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor
|
|
|
|
|
|
# Console Devices
|
|
|
|
# ISA console
|
|
#pc0 at isa? port 0x60 irq 1 # pccons generic PC console driver
|
|
# Keyboard layout configuration for pccons
|
|
#options FRENCH_KBD
|
|
#options FINNISH_KBD
|
|
#options GERMAN_KBD
|
|
#options NORWEGIAN_KBD
|
|
# pccons-specific options:
|
|
#options XSERVER_DDB # PF12 gets you into DDB when X is running
|
|
#options XSERVER # X server support
|
|
|
|
|
|
# wscons
|
|
pckbc0 at isa? # pc keyboard controller
|
|
pckbd* at pckbc? # PC keyboard
|
|
pms* at pckbc? # PS/2 mouse for wsmouse
|
|
vga0 at isa?
|
|
vga* at pci? dev ? function ?
|
|
pcdisplay0 at isa? # CGA, MDA, EGA, HGA
|
|
wsdisplay* at vga? console ?
|
|
wsdisplay* at pcdisplay? console ?
|
|
wskbd* at pckbd? console ?
|
|
wsmouse* at pms? mux 0
|
|
|
|
pcppi0 at isa?
|
|
sysbeep0 at pcppi?
|
|
|
|
# Serial Devices
|
|
|
|
# PCI serial interfaces
|
|
com* at puc? port ? # 16x50s on "universal" comm boards
|
|
cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards
|
|
cz* at pci? dev ? function ? # Cyclades-Z multi-port serial boards
|
|
|
|
# ISA Plug-and-Play serial interfaces
|
|
com* at isapnp? # Modems and serial boards
|
|
|
|
# PCMCIA serial interfaces
|
|
com* at pcmcia? function ? # Modems and serial cards
|
|
|
|
pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards
|
|
com* at pcmcom? slave ? # ...and the slave devices
|
|
|
|
# CardBus serial interfaces
|
|
com* at cardbus? dev ? function ? # Modems and serial cards
|
|
|
|
# ISA serial interfaces
|
|
#options COM_HAYESP # adds Hayes ESP serial board support
|
|
com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports
|
|
com1 at isa? port 0x2f8 irq 3
|
|
com2 at isa? port 0x3e8 irq 5
|
|
#com3 at isa? port 0x2e8 irq 9
|
|
#ast0 at isa? port 0x1a0 irq 5 # AST 4-port serial cards
|
|
#com* at ast? slave ?
|
|
#boca0 at isa? port 0x100 irq 5 # BOCA 8-port serial cards
|
|
#boca0 at isa? port 0x100 irq 5 # BOCA 16-port serial cards (BB2016)
|
|
#boca1 at isa? port 0x140 irq 5 # this line is also needed for BB2016
|
|
#com* at boca? slave ?
|
|
#tcom0 at isa? port 0x100 irq 7 # TC-800 8-port serial cards
|
|
#com* at tcom? slave ?
|
|
#rtfps0 at isa? port 0x1230 irq 10 # RT 4-port serial cards
|
|
#com* at rtfps? slave ?
|
|
#cy0 at isa? iomem 0xd4000 irq 12 # Cyclades serial cards
|
|
#addcom0 at isa? port 0x108 irq 5 # Addonics FlexPort 8S
|
|
#com* at addcom? slave ?
|
|
#moxa0 at isa? port 0x100 irq 5 # MOXA C168H serial card (experimental)
|
|
#com* at moxa? slave ?
|
|
|
|
|
|
# Parallel Printer Interfaces
|
|
|
|
# ISA parallel printer interfaces
|
|
lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports
|
|
lpt1 at isa? port 0x278
|
|
lpt2 at isa? port 0x3bc
|
|
|
|
# Hardware monitors
|
|
|
|
# LM7[89] and compatible hardware monitors
|
|
#lm0 at isa? port 0x290 # other common ports: 0x280, 0x310
|
|
|
|
# VIA VT82C686A hardware monitor
|
|
#viapm* at pci? dev ? function ?
|
|
#viaenv* at viapm?
|
|
|
|
|
|
# SCSI Controllers and Devices
|
|
|
|
# PCMCIA SCSI controllers
|
|
aic* at pcmcia? function ? # Adaptec APA-1460 SCSI
|
|
esp* at pcmcia? function ? # Qlogic ESP406/FAS408 SCSI
|
|
|
|
# CardBus SCSI cards
|
|
ahc* at cardbus? dev ? function ? # Adaptec ADP-1480
|
|
adv* at cardbus? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA] SCSI
|
|
|
|
# SCSI bus support
|
|
scsibus* at scsi?
|
|
|
|
# SCSI devices
|
|
sd* at scsibus? target ? lun ? # SCSI disk drives
|
|
st* at scsibus? target ? lun ? # SCSI tape drives
|
|
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
|
|
ch* at scsibus? target ? lun ? # SCSI autochangers
|
|
ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices
|
|
ss* at scsibus? target ? lun ? # SCSI scanners
|
|
uk* at scsibus? target ? lun ? # SCSI unknown
|
|
|
|
# IDE and related devices
|
|
# PCI IDE controllers - see pciide(4) for supported hardware.
|
|
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
|
|
# how to set up DMA modes for this chip. This may work, or may cause
|
|
# a machine hang with some controllers.
|
|
pciide* at pci? dev ? function ? flags 0x0000
|
|
|
|
# ISA Plug-and-Play IDE controllers
|
|
wdc* at isapnp?
|
|
|
|
# PCMCIA IDE controllers
|
|
wdc* at pcmcia? function ?
|
|
|
|
# ISA ST506, ESDI, and IDE controllers
|
|
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
|
|
# fall back to 16bits I/O if 32bits I/O are not functional).
|
|
# Some controllers pass the initial 32bit test, but will fail later.
|
|
wdc0 at isa? port 0x1f0 irq 14 flags 0x00
|
|
wdc1 at isa? port 0x170 irq 15 flags 0x00
|
|
|
|
# IDE drives
|
|
# Flags are used only with controllers that support DMA operations
|
|
# and mode settings (e.g. some pciide controllers)
|
|
# The lowest order four bits (rightmost digit) of the flags define the PIO
|
|
# mode to use, the next set of four bits the DMA mode and the third set the
|
|
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
|
|
# to use, and the last bit must be 1 for this setting to be used.
|
|
# For DMA and UDMA, 0xf (1111) means 'disable'.
|
|
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
|
|
# (0xc=1100, 0xa=1010, 0xf=1111)
|
|
# 0x0000 means "use whatever the drive claims to support".
|
|
wd* at wdc? channel ? drive ? flags 0x0000
|
|
wd* at pciide? channel ? drive ? flags 0x0000
|
|
|
|
# ATAPI bus support
|
|
atapibus* at atapi?
|
|
|
|
# ATAPI devices
|
|
# flags have the same meaning as for IDE drives.
|
|
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
|
|
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
|
|
st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives
|
|
uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
|
|
|
|
|
|
# Miscellaneous mass storage devices
|
|
|
|
# ISA floppy
|
|
fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers
|
|
#fdc1 at isa? port 0x370 irq ? drq ?
|
|
fd* at fdc? drive ? # the drives themselves
|
|
# some machines need you to do this instead of fd*
|
|
#fd0 at fdc0 drive 0
|
|
|
|
# Network Interfaces
|
|
|
|
# PCI network interfaces
|
|
ex* at pci? dev ? function ? # 3Com 90x[BC]
|
|
fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B
|
|
ne* at pci? dev ? function ? # NE2000-compatible Ethernet
|
|
rtk* at pci? dev ? function ? # Realtek 8129/8139
|
|
tlp* at pci? dev ? function ? # DECchip 21x4x and clones
|
|
|
|
# PCMCIA network interfaces
|
|
an* at pcmcia? function ? # Aironet PC4500/PC4800 (802.11)
|
|
awi* at pcmcia? function ? # BayStack 650/660 (802.11FH/DS)
|
|
cnw* at pcmcia? function ? # Xircom/Netwave AirSurfer
|
|
ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
|
|
mbe* at pcmcia? function ? # MB8696x based Ethernet
|
|
ne* at pcmcia? function ? # NE2000-compatible Ethernet
|
|
ray* at pcmcia? function ? # Raytheon Raylink (802.11)
|
|
sm* at pcmcia? function ? # Megahertz Ethernet
|
|
wi* at pcmcia? function ? # Lucent/Intersil WaveLan IEEE (802.11)
|
|
xi* at pcmcia? function ? # Xircom CreditCard Ethernet
|
|
|
|
mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards
|
|
com* at mhzc?
|
|
sm* at mhzc?
|
|
|
|
# CardBus network cards
|
|
ex* at cardbus? dev ? function ? # 3Com 3C575TX
|
|
fxp* at cardbus? dev ? function ? # Intel i8255x
|
|
rtk* at cardbus? dev ? function ? # Realtek 8129/8139
|
|
tlp* at cardbus? dev ? function ? # DECchip 21143
|
|
|
|
# MII/PHY support
|
|
dmphy* at mii? phy ? # Davicom DM9101 PHYs
|
|
exphy* at mii? phy ? # 3Com internal PHYs
|
|
icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x
|
|
inphy* at mii? phy ? # Intel 82555 PHYs
|
|
iophy* at mii? phy ? # Intel 82553 PHYs
|
|
lxtphy* at mii? phy ? # Level One LXT-970 PHYs
|
|
nsphy* at mii? phy ? # NS83840 PHYs
|
|
nsphyter* at mii? phy ? # NS83843 PHYs
|
|
qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
|
|
sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
|
|
tlphy* at mii? phy ? # ThunderLAN PHYs
|
|
tqphy* at mii? phy ? # TDK Semiconductor PHYs
|
|
ukphy* at mii? phy ? # generic unknown PHYs
|
|
|
|
|
|
# USB Controller and Devices
|
|
|
|
# PCI USB controllers
|
|
ohci* at pci? dev ? function ? # Open Host Controller
|
|
uhci* at pci? dev ? function ? # Universal Host Controller (Intel)
|
|
|
|
# CardBus USB controllers
|
|
#ohci* at cardbus? dev ? function ? # Open Host Controller
|
|
|
|
# USB bus support
|
|
usb* at ohci?
|
|
usb* at uhci?
|
|
|
|
# USB Hubs
|
|
uhub* at usb?
|
|
uhub* at uhub? port ? configuration ? interface ?
|
|
|
|
# USB HID device
|
|
uhidev* at uhub? port ? configuration ? interface ?
|
|
|
|
# USB Mice
|
|
ums* at uhidev? reportid ?
|
|
wsmouse* at ums? mux 0
|
|
|
|
# USB Keyboards
|
|
ukbd* at uhidev? reportid ?
|
|
wskbd* at ukbd? console ? mux 1
|
|
|
|
# USB Generic HID devices
|
|
uhid* at uhidev? reportid ?
|
|
|
|
# USB Printer
|
|
ulpt* at uhub? port ? configuration ? interface ?
|
|
|
|
# USB Modem
|
|
umodem* at uhub? port ? configuration ?
|
|
ucom* at umodem?
|
|
|
|
# USB Mass Storage
|
|
umass* at uhub? port ? configuration ? interface ?
|
|
|
|
# USB audio
|
|
uaudio* at uhub? port ? configuration ?
|
|
|
|
# USB MIDI
|
|
umidi* at uhub? port ? configuration ?
|
|
|
|
# USB IrDA
|
|
# USB-IrDA bridge spec
|
|
uirda* at uhub? port ? configuration ? interface ?
|
|
irframe* at uirda?
|
|
|
|
# SigmaTel STIr4200 USB/IrDA Bridge
|
|
ustir* at uhub? port ?
|
|
irframe* at ustir?
|
|
|
|
# USB Ethernet adapters
|
|
aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters
|
|
cue* at uhub? port ? # CATC USB-EL1201A based adapters
|
|
kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters
|
|
|
|
# Prolofic PL2301/PL2302 host-to-host adapter
|
|
upl* at uhub? port ?
|
|
|
|
# Serial adapters
|
|
# FTDI FT8U100AX serial adapter
|
|
uftdi* at uhub? port ?
|
|
ucom* at uftdi? portno ?
|
|
|
|
uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter
|
|
ucom* at uplcom? portno ?
|
|
|
|
umct* at uhub? port ? # MCT USB-RS232 serial adapter
|
|
ucom* at umct? portno ?
|
|
|
|
# Diamond Multimedia Rio 500
|
|
urio* at uhub? port ?
|
|
|
|
# USB Handspring Visor
|
|
uvisor* at uhub? port ?
|
|
ucom* at uvisor?
|
|
|
|
# Y@P firmware loader
|
|
uyap* at uhub? port ?
|
|
|
|
# USB Generic driver
|
|
ugen* at uhub? port ?
|
|
|
|
|
|
# IrDA and Consumer Ir devices
|
|
|
|
# Toshiba Oboe
|
|
oboe* at pci? dev ? function ?
|
|
irframe* at oboe?
|
|
|
|
|
|
# Audio Devices
|
|
|
|
# PCI audio devices
|
|
auich* at pci? dev ? function ? # Intel ICH integrated AC'97 Audio
|
|
autri* at pci? dev ? function ? # Trident 4DWAVE based AC'97 Audio
|
|
auvia* at pci? dev ? function ? # VIA VT82C686A integrated AC'97 Audio
|
|
clcs* at pci? dev ? function ? # Cirrus Logic CS4280
|
|
clct* at pci? dev ? function ? # Cirrus Logic CS4281
|
|
cmpci* at pci? dev ? function ? # C-Media CMI8338/8738
|
|
eap* at pci? dev ? function ? # Ensoniq AudioPCI
|
|
emuxki* at pci? dev ? function ? # Creative SBLive! and PCI512
|
|
esa* at pci? dev ? function ? # ESS Allegro-1 / Maestro-3 PCI Audio
|
|
esm* at pci? dev ? function ? # ESS Maestro-1/2/2e PCI Audio Accelerator
|
|
eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive
|
|
fms* at pci? dev ? function ? # Forte Media FM801
|
|
neo* at pci? dev ? function ? # NeoMagic 256 AC'97 Audio
|
|
sv* at pci? dev ? function ? # S3 SonicVibes
|
|
yds* at pci? dev ? function ? # Yamaha DS-1 PCI Audio
|
|
|
|
# ISA Plug-and-Play audio devices
|
|
ess* at isapnp? # ESS Tech ES1887, ES1888, ES888 audio
|
|
guspnp* at isapnp? # Gravis Ultra Sound PnP audio
|
|
sb* at isapnp? # SoundBlaster-compatible audio
|
|
wss* at isapnp? # Windows Sound System
|
|
ym* at isapnp? # Yamaha OPL3-SA3 audio
|
|
|
|
# ISA audio devices
|
|
# the "aria" probe might give false hits
|
|
#aria0 at isa? port 0x290 irq 10 # Aria
|
|
#ess0 at isa? port 0x220 irq 5 drq 1 drq2 5 # ESS 18XX
|
|
gus0 at isa? port 0x220 irq 7 drq 1 drq2 6 # Gravis Ultra Sound
|
|
pas0 at isa? port 0x220 irq 7 drq 1 # ProAudio Spectrum
|
|
pss0 at isa? port 0x220 irq 7 drq 6 # Personal Sound System
|
|
sp0 at pss0 port 0x530 irq 10 drq 0 # sound port driver
|
|
sb0 at isa? port 0x220 irq 5 drq 1 drq2 5 # SoundBlaster
|
|
#wss0 at isa? port 0x530 irq 10 drq 0 drq2 1 # Windows Sound System
|
|
|
|
# PCMCIA audio devices
|
|
esl* at pcmcia? function ? # ESS 1688 AudioDrive
|
|
|
|
#cms0 at isa? port 0x220 # Creative Music System
|
|
|
|
# OPL[23] FM synthesizers
|
|
#opl0 at isa? port 0x388 # use only if not attached to sound card
|
|
opl* at cmpci? flags 1
|
|
opl* at esl?
|
|
opl* at eso?
|
|
opl* at ess?
|
|
opl* at fms?
|
|
opl* at sb?
|
|
opl* at sv?
|
|
opl* at wss?
|
|
opl* at yds?
|
|
opl* at ym?
|
|
|
|
# Audio support
|
|
audio* at audiobus?
|
|
|
|
# MPU 401 UARTs
|
|
#mpu* at isa? port 0x330 irq 9 # MPU401 or compatible card
|
|
mpu* at cmpci?
|
|
mpu* at eso?
|
|
mpu* at fms?
|
|
mpu* at sb?
|
|
mpu* at yds?
|
|
mpu* at ym?
|
|
|
|
# MIDI support
|
|
midi* at midibus?
|
|
midi* at pcppi? # MIDI interface to the PC speaker
|
|
|
|
# The spkr driver provides a simple tone interface to the built in speaker.
|
|
#spkr0 at pcppi? # PC speaker
|
|
|
|
|
|
# Mice
|
|
|
|
# ISA busmice
|
|
lms0 at isa? port 0x23c irq 5 # Logitech bus mouse
|
|
lms1 at isa? port 0x238 irq 5
|
|
mms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse
|
|
mms1 at isa? port 0x238 irq 5
|
|
wsmouse* at lms? mux 0
|
|
wsmouse* at mms? mux 0
|
|
# backwards compatible versions
|
|
#olms0 at isa? port 0x23c irq 5 # Logitech bus mouse
|
|
#olms1 at isa? port 0x238 irq 5
|
|
#omms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse
|
|
#omms1 at isa? port 0x238 irq 5
|
|
|
|
|
|
# Joysticks
|
|
|
|
#joy* at pnpbios? index ? # Game port
|
|
|
|
# ISA Plug-and-Play joysticks
|
|
joy* at isapnp? # Game ports (usually on audio cards)
|
|
|
|
# ISA joysticks. Probe is a little strange; add only if you have one.
|
|
#joy0 at isa? port 0x201
|
|
|
|
|
|
# Miscellaneous Devices
|
|
|
|
# Planetconnect Satellite receiver driver.
|
|
#satlink0 at isa? port 0x300 drq 1
|
|
|
|
|
|
# Pull in optional local configuration
|
|
include "arch/i386/conf/GENERIC.local"
|
|
|
|
|
|
# Pseudo-Devices
|
|
|
|
# disk/mass storage pseudo-devices
|
|
pseudo-device ccd 4 # concatenated/striped disk devices
|
|
#pseudo-device raid 8 # RAIDframe disk driver
|
|
#options RAID_AUTOCONFIG # auto-configuration of RAID components
|
|
# Options to enable various other RAIDframe RAID types.
|
|
# options RF_INCLUDE_EVENODD=1
|
|
# options RF_INCLUDE_RAID5_RS=1
|
|
# options RF_INCLUDE_PARITYLOGGING=1
|
|
# options RF_INCLUDE_CHAINDECLUSTER=1
|
|
# options RF_INCLUDE_INTERDECLUSTER=1
|
|
# options RF_INCLUDE_PARITY_DECLUSTERING=1
|
|
# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
|
|
pseudo-device md 1 # memory disk device (ramdisk)
|
|
pseudo-device vnd 4 # disk-like interface to files
|
|
|
|
# network pseudo-devices
|
|
pseudo-device bpfilter 8 # Berkeley packet filter
|
|
pseudo-device ipfilter # IP filter (firewall) and NAT
|
|
pseudo-device loop # network loopback
|
|
pseudo-device ppp 2 # Point-to-Point Protocol
|
|
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
|
pseudo-device sl 2 # Serial Line IP
|
|
pseudo-device strip 2 # Starmode Radio IP (Metricom)
|
|
pseudo-device irframetty # IrDA frame line discipline
|
|
pseudo-device tun 2 # network tunneling over tty
|
|
pseudo-device gre 2 # generic L3 over IP tunnel
|
|
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
|
|
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
|
|
#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
|
|
pseudo-device vlan # IEEE 802.1q encapsulation
|
|
pseudo-device bridge # simple inter-network bridging
|
|
|
|
# miscellaneous pseudo-devices
|
|
pseudo-device pty # pseudo-terminals
|
|
pseudo-device tb 1 # tablet line discipline
|
|
pseudo-device sequencer 1 # MIDI sequencer
|
|
# rnd works; RND_COM does not on port i386 yet.
|
|
pseudo-device rnd # /dev/random and in-kernel generator
|
|
#options RND_COM # use "com" randomness as well (BROKEN)
|
|
pseudo-device clockctl # user control of clock subsystem
|
|
|
|
# a pseudo device needed for Coda # also needs CODA (above)
|
|
pseudo-device vcoda 4 # coda minicache <-> venus comm.
|
|
|
|
# wscons pseudo-devices
|
|
pseudo-device wsmux # mouse & keyboard multiplexor
|
|
pseudo-device wsfont
|