2015 lines
57 KiB
Plaintext
2015 lines
57 KiB
Plaintext
.\" $NetBSD: sysinst,v 1.69 2004/06/11 06:28:53 mbw Exp $
|
|
.\"
|
|
.\" Copyright (c) 1999-2002 The NetBSD Foundation, Inc.
|
|
.\" All rights reserved.
|
|
.\"
|
|
.\" Redistribution and use in source and binary forms, with or without
|
|
.\" modification, are permitted provided that the following conditions
|
|
.\" are met:
|
|
.\" 1. Redistributions of source code must retain the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer.
|
|
.\" 2. Redistributions in binary form must reproduce the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer in the
|
|
.\" documentation and/or other materials provided with the distribution.
|
|
.\" 3. All advertising materials mentioning features or use of this software
|
|
.\" must display the following acknowledgement:
|
|
.\" This product includes software developed by the NetBSD
|
|
.\" Foundation, Inc. and its contributors.
|
|
.\" 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
.\" contributors may be used to endorse or promote products derived
|
|
.\" from this software without specific prior written permission.
|
|
.\"
|
|
.\" THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
.\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
.\" POSSIBILITY OF SUCH DAMAGE.
|
|
.\"
|
|
.
|
|
.
|
|
.de (pcmcia
|
|
. Bl -tag -width x[PCMCIA]x
|
|
.It [ Tn PCMCIA ]
|
|
..
|
|
.de pcmcia)
|
|
. El
|
|
..
|
|
.
|
|
.
|
|
.\" Define strings for partition references:
|
|
.\" \*[part_raw] `raw' partition (usually `c' or `d')
|
|
.\" \*[part_free] first "free" partition (usually part_raw+1)
|
|
.\" \*[part_usr] default "/usr" partition (usually part_free)
|
|
.\" \*[part_max] last partition (usually `h' or `p')
|
|
.
|
|
.ds part_raw c
|
|
.ds part_free d
|
|
.ds part_usr d
|
|
.ds part_max h
|
|
.if \n[arc]:\n[bebox]:\n[cobalt]:\n[hpcarm]:\n[hpcmips]:\n[i386]:\
|
|
\n[sbmips]:\n[sh3eb]:\n[sh3el]:\n[x86_64] \{\
|
|
. ds part_raw d
|
|
. ds part_free e
|
|
. ds part_usr e
|
|
.\}
|
|
.if \n[sgimips] \{\
|
|
. ds part_free e
|
|
. ds part_usr e
|
|
.\}
|
|
.if \n[amiga]:\n[amigappc]:\n[arc]:\n[atari]:\n[cobalt]:\n[evbmips]:\
|
|
\n[evbppc]:\n[hpcmips]:\n[i386]:\n[macppc]:\n[ofppc]:\n[playstation2]:\
|
|
\n[sandpoint]:\n[sbmips]:\n[sgimips]:\n[x86_64] \{\
|
|
. ds part_max p
|
|
.\}
|
|
.if \n[acorn26]:\n[acorn32]:\n[cats]:\n[evbarm]:\n[evbppc]:\n[pc532]:\
|
|
\n[sandpoint]:\n[shark] \{\
|
|
. ds part_usr e
|
|
.\}
|
|
.if \n[macppc]:\n[news68k]:\n[newsmips]:\n[sparc]:\n[sparc64] \{\
|
|
. ds part_usr g
|
|
.\}
|
|
.
|
|
.
|
|
.Ss2 Running the sysinst installation program
|
|
.(enum
|
|
.To 2 Introduction
|
|
.Em Introduction
|
|
.Pp
|
|
Using
|
|
.Ic sysinst ,
|
|
installing
|
|
.Nx
|
|
is a relatively easy process.
|
|
You still should read this document and have it in hand when doing the
|
|
installation process.
|
|
This document tries to be a good guideline for the installation and as such
|
|
covers many details for the sake of completeness.
|
|
Do not let this discourage you; the install program is not hard
|
|
to use.
|
|
.
|
|
.if !\n[acorn26]:\n[atari]:\n[mac68k]:\n[macppc]:\n[mvme68k]:\n[news68k]:\n[newsmips]:\n[pmax]:\n[sgimips]:\n[sparc]:\n[sparc64]:\n[x68k] \{\
|
|
.It
|
|
.To 2 "Possible PCMCIA issues"
|
|
.Em Possible Tn PCMCIA Em issues
|
|
.Pp
|
|
Machines with
|
|
.Tn PCMCIA
|
|
slots may have problems during installation.
|
|
With the improvements of the
|
|
.Tn PCMCIA
|
|
code in this release, this will not happen very frequently.
|
|
If you do not have
|
|
.Tn PCMCIA
|
|
on your machine
|
|
.Tn ( PCMCIA
|
|
is only really used on laptop machines),
|
|
you can skip this section, and ignore the
|
|
.Dq Bq Tn PCMCIA
|
|
notes.
|
|
If you do have
|
|
.Tn PCMCIA
|
|
in your machine, you can safely ignore this section and the
|
|
.Dq Bq Tn PCMCIA
|
|
the first time, as you are likely to not have problems.
|
|
Should troubles
|
|
occur during floppy boot, they may be
|
|
.Tn PCMCIA
|
|
specific.
|
|
You should then re-read this section and try again,
|
|
following the instructions in the
|
|
.Dq Bq Tn PCMCIA
|
|
notes.
|
|
.Pp
|
|
This section explains how to work around the installation problem.
|
|
.Pp
|
|
The kernel keeps careful track of what interrupts
|
|
and I/O ports are in use during autoconfiguration.
|
|
It then allows the
|
|
.Tn PCMCIA
|
|
devices to pick unused interrupts and I/O ports.
|
|
Unfortunately, the
|
|
.Tn Li INSTALL
|
|
kernel may not detect all devices in your system.
|
|
This may be because the
|
|
.Tn Li INSTALL
|
|
kernel only supports the minimum set of devices to install
|
|
.Nx
|
|
on your system, or it may be that
|
|
.Nx
|
|
does not have support for the device causing the conflict.
|
|
.Pp
|
|
For example, suppose your laptop has a
|
|
soundblaster device built in; the
|
|
.Tn Li INSTALL
|
|
kernel has no sound support.
|
|
The
|
|
.Tn PCMCIA
|
|
code might allocate your soundblaster's
|
|
.Tn IRQ
|
|
and I/O ports to
|
|
.Tn PCMCIA
|
|
devices, causing them not to work, or to lock up the system.
|
|
This is especially bad if one of the devices in question is your ethernet card.
|
|
.Pp
|
|
As of
|
|
.Nx 1.5 ,
|
|
the kernel attempts to probe for available interrupts that are
|
|
usable by the
|
|
.Tn PCIC
|
|
.Tn ( PCMCIA
|
|
interrupt controller).
|
|
Assuming that this functions correctly,
|
|
it should alleviate interrupt conflicts;
|
|
however, I/O port conflicts are still possible.
|
|
.Pp
|
|
This problem will impact some, but not all, users of
|
|
.Tn PCMCIA .
|
|
If this problem is affecting you, watch the
|
|
.Dq Bq Tn PCMCIA
|
|
notes that will appear in this document.
|
|
.if \n[i386] \{\
|
|
.Pp
|
|
It can be difficult to distinguish an interrupt conflict from
|
|
an I/O space conflict.
|
|
There are no hard-and-fast rules, but
|
|
interrupt conflicts are more likely to lock up the machine,
|
|
and I/O space conflicts are more likely to result in misbehavior
|
|
(e.g. a network card that cannot send or receive packets).
|
|
.Pp
|
|
The kernel selects a free interrupt according to a mask of allowable
|
|
interrupts, stored in the kernel global variable
|
|
.Va pcic_isa_intr_alloc_mask .
|
|
This mask is a logical-or of power-of-2s of allowable interrupts:
|
|
.(disp
|
|
IRQ Val IRQ Val IRQ Val IRQ Val
|
|
0 0x0001 4 0x0010 8 0x0100 12 0x1000
|
|
1 0x0002 5 0x0020 9 0x0200 13 0x2000
|
|
2 0x0004 6 0x0040 10 0x0400 14 0x4000
|
|
3 0x0008 7 0x0080 11 0x0800 15 0x8000
|
|
.disp)
|
|
.Pp
|
|
For example, 0x0a00 allows both IRQ 9 and IRQ 11.
|
|
By default, the
|
|
.Tn Li INSTALL
|
|
kernel permits all IRQs other than IRQs 5 and 7, so the corresponding
|
|
mask is 0xff5f.
|
|
The
|
|
.Tn Li GENERIC
|
|
kernel, however, allows all IRQs.
|
|
(The presumption here is that IRQ 10 may be assigned to a device that the
|
|
.Tn Li GENERIC
|
|
kernel
|
|
supports, but that the
|
|
.Tn Li INSTALL
|
|
does not.)
|
|
Because of support for interrupt probing, it is no
|
|
longer necessary to exclude IRQs 3 and 5 explicitly; if they are
|
|
in use, they should not be assigned to
|
|
.Tn PCMCIA .
|
|
.Pp
|
|
The kernel selects IO space by assigning cards IO space within a
|
|
predefined range.
|
|
The range is specified as a base and size,
|
|
specified by the kernel global variables
|
|
.Va pcic_isa_alloc_iobase
|
|
and
|
|
.Va pcic_isa_alloc_iosize .
|
|
For systems with 12-bit addressing (most systems), the kernel defaults to a
|
|
base of 0x400 and a size of 0xbff (a range of 0x400-0xfff).
|
|
For systems with 10-bit addressing, the kernel defaults to a
|
|
base of 0x300 and a size of 0xff (range of 0x300-0x3ff).
|
|
.Pp
|
|
Unfortunately, these ranges may conflict with some devices.
|
|
In the event of a conflict, try a base of 0x330 with a size of 0x0bf (range
|
|
of 0x330-0x3ff).
|
|
.Pp
|
|
In order to work around this at installation time, you may
|
|
boot the
|
|
.Tn Li INSTALL
|
|
kernel with
|
|
.Ic boot Fl d ,
|
|
in order to enter
|
|
.Xr ddb 4
|
|
(the in-kernel debugger), and then use the
|
|
.Ic write
|
|
command to alter the variable values:
|
|
.Pp
|
|
.Dl db\*> Ic "write pcic_isa_intr_alloc_mask 0x0a00"
|
|
.Dl "pcic_isa_intr_alloc_mask 0xff5f = 0xa00"
|
|
.Dl db\*> Ic "write pcic_isa_alloc_iobase 0x330"
|
|
.Dl "pcic_isa_alloc_iobase 0x400 = 0x330"
|
|
.Dl db\*> Ic "write pcic_isa_alloc_iosize 0x0bf"
|
|
.Dl "pcic_isa_alloc_iosize 0xbff = 0xbf"
|
|
.Dl db\*> Ic "continue"
|
|
.Pp
|
|
Note that, since some floppy images may not have symbol information in
|
|
the kernel, you may have to consult the matching
|
|
.Pa .symbols
|
|
file in the
|
|
.Pa binary/kernel
|
|
directory in the installation tree.
|
|
Find the pcic_ symbols used above,
|
|
look at the hexadecimal value in the first column, and write, for
|
|
example (if
|
|
.Va pcic_isa_intr_alloc_mask
|
|
is equal to c0513e3c):
|
|
.Pp
|
|
.Dl db\*> Ic "write 0xc0513e3c 0x0a00"
|
|
.Pp
|
|
|
|
After installation, this value can be permanently written to the kernel image
|
|
directly with:
|
|
.Pp
|
|
.Dl # Ic "cp /netbsd /netbsd.bak"
|
|
.Dl # Ic "gdb --write /netbsd"
|
|
.Dl (gdb) Ic "set pcic_isa_intr_alloc_mask=0x0a00"
|
|
.Dl (gdb) Ic "set pcic_isa_alloc_iobase=0x330"
|
|
.Dl (gdb) Ic "set pcic_isa_alloc_iosize=0x0bf"
|
|
.Dl (gdb) Ic "quit"
|
|
.Dl #
|
|
.Pp
|
|
or you could specify these value when configuring your kernel, e.g.:
|
|
.(disp
|
|
options PCIC_ISA_INTR_ALLOC_MASK=0x0a00
|
|
options PCIC_ISA_ALLOC_IOBASE=0x330
|
|
options PCIC_ISA_ALLOC_IOSIZE=0x0bf
|
|
.disp)
|
|
.Pp
|
|
If you can
|
|
get your
|
|
.Tn PCMCIA
|
|
card to work using this hack, you may also ignore the
|
|
.Bq Tn PCMCIA
|
|
notes later in this document.
|
|
.Pp
|
|
We hope to provide a more elegant solution to this problem in a future
|
|
.Nx
|
|
release.
|
|
.\} \" \n[i386]
|
|
.\} \" !\n[acorn26]:\n[atari]:\n[macppc]:\n[mvme68k]:\n[news68k]:\n[newsmips]:\n[pmax]:\n[sgimips]:\n[sparc]:\n[sparc64]:\n[x68k]
|
|
.if \n[mac68k] \{\
|
|
.It
|
|
.To 2 "Possible hardware-specific issues"
|
|
.Em Possible hardware-specific issues
|
|
.(bullet
|
|
.Em SCSI driver problems
|
|
.Pp
|
|
The SCSI driver used in the kernel on many older Macintosh systems is, by
|
|
default, the ncrscsi driver.
|
|
It contains a recognized but as yet unfixed bug that affects some
|
|
disk drive/controller combinations, usually Quantum disks.
|
|
Under heavy load these systems may hang or corrupt
|
|
the file system; or, you may experience frequent
|
|
.Em Segmentation fault
|
|
and
|
|
.Em Illegal instruction
|
|
errors that may or may not be consistently repeatable.
|
|
This latter condition is particularly prevalent on systems with
|
|
minimal RAM installed.
|
|
.Pp
|
|
If either of these problems occur on your system you are advised to use the
|
|
SBC variants of the Kernel and Installation Kernel.
|
|
However, be aware that this issue does not affect
|
|
e.g. Centris or Quadra systems.
|
|
.Pp
|
|
.It
|
|
.Em The 68LC040 processor
|
|
.Pp
|
|
.Nx
|
|
has known but unresolved problems running on the 68LC040 processor, the
|
|
variant of the 68040 that does not contain the floating point unit (FPU).
|
|
The kernel is thus forced to emulate the missing operations in software.
|
|
Unfortunately the 68LC040 processor has a design problem that causes
|
|
the emulation to fail intermittently.
|
|
We hope to provide a solution for this issue in a future
|
|
.Nx
|
|
release.
|
|
.Pp
|
|
Software emulation of floating point operations is
|
|
not a problem on the 68020 and 68030 processors.
|
|
.bullet)
|
|
.\} \" \n[mac68k]
|
|
.It
|
|
.To 2 General
|
|
.Em General
|
|
.Pp
|
|
The following is a walk-through of the steps you will take while
|
|
getting
|
|
.Nx
|
|
installed on your hard disk.
|
|
.Ic sysinst
|
|
is a menu driven
|
|
installation system that allows for some freedom in doing the
|
|
installation.
|
|
Sometimes, questions will be asked and in many cases
|
|
the default answer will be displayed in brackets
|
|
.Pq Dq \&[\ ]
|
|
after the question.
|
|
If you wish to stop the installation, you may press
|
|
.Key CONTROL-C
|
|
at any time, but if you do, you'll have to begin the installation
|
|
process again from scratch by running the
|
|
.Pa /sysinst
|
|
program from the command prompt.
|
|
It is not necessary to reboot.
|
|
.It
|
|
.To 2 "Quick install"
|
|
.Em Quick install
|
|
.Pp
|
|
First, let's describe a quick install.
|
|
The other sections of this document go into the installation procedure in more
|
|
detail, but you may find that you do not need this.
|
|
If you want detailed instructions, skip to the next section.
|
|
This section describes a basic installation, using a CD-ROM install as
|
|
an example.
|
|
.Pp
|
|
.(bullet
|
|
What you need.
|
|
.(bullet
|
|
The distribution sets (in this example, they are on CD).
|
|
.if !\n[pmax]:\n[sgimips]:\n[sparc64] \{\
|
|
.It
|
|
.ie \n[alpha] Two floppy disks.
|
|
.el \{\
|
|
.ie \n[i386] Two 1.44 MB 3.5" floppy disks.
|
|
.el \{\
|
|
.ie \n[mac68k] The Mac OS Booter application and an Installation Kernel
|
|
.el \{\
|
|
.ie \n[acorn26]:\n[cats]:\n[evbppc]:\n[macppc]:\n[sparc] \{\
|
|
Some form of bootable media, described above.
|
|
.\}
|
|
.el \{\
|
|
.ie \n[atari] \{\
|
|
A floppy disk containing a suitable boot.fs and a floppy with the
|
|
sysinst.fs image.
|
|
See the "prepare" section about obtaining those.
|
|
.\}
|
|
.el One 1.44 MB 3.5" floppy.
|
|
.\}\}\}\}
|
|
.\} \" !\n[pmax]:\n[sgimips]:\n[sparc64]
|
|
.if \n[i386] \{\
|
|
.It
|
|
A PC with a 386 or newer processor.
|
|
.\} \" \n[i386]
|
|
.if \n[mac68k] \{\
|
|
.It
|
|
A Macintosh with a 68020 and MMU, 68030 or 68RC040 processor.
|
|
An FPU is not required but will be used if present
|
|
(but see the note above regarding the 68LC040).
|
|
.\}
|
|
.It
|
|
A CD-ROM drive
|
|
.ie \n[acorn26]:\n[atari]:\n[alpha]:\n[cats]:\n[evbppc]:\n[i386]:\n[macppc]:\n[sparc64] (SCSI or ATAPI),
|
|
.el (SCSI),
|
|
a hard disk and a minimum of
|
|
.if \n[acorn26] 8 MB
|
|
.if \n[alpha] 32 MB
|
|
.if \n[atari] 4 MB (TT030/Falcon) or 16 MB (Hades/Milan)
|
|
.if \n[cats] 8 MB
|
|
.if \n[i386] 4 MB
|
|
.if \n[mac68k] 8 MB
|
|
.if \n[macppc] 16 MB
|
|
.if \n[mvme68k] 4 MB
|
|
.if \n[news68k] 4 MB
|
|
.if \n[newsmips] 16 MB
|
|
.if \n[pmax] 8 MB
|
|
.if \n[sparc] 4 MB
|
|
.if \n[sparc64] 16 MB
|
|
.if \n[sgimips] 16 MB
|
|
of memory installed.
|
|
.It
|
|
The hard disk should have at least
|
|
.if \n[acorn26] 200
|
|
.if \n[alpha] 200
|
|
.if \n[atari] 120
|
|
.if \n[cats] 200
|
|
.if \n[i386] 70
|
|
.if \n[mac68k] 120
|
|
.if \n[macppc] 200
|
|
.if \n[mvme68k] 100
|
|
.if \n[news68k] 100
|
|
.if \n[newsmips] 200
|
|
.if \n[pmax] 200
|
|
.if \n[sparc] 200
|
|
.if \n[sparc64] 200
|
|
.if \n[sgimips] 200
|
|
+
|
|
.Em n
|
|
megabytes of
|
|
space free, where
|
|
.Em n
|
|
is the number of megabytes of
|
|
main memory in your system.
|
|
If you wish to install the X Window System as well, you will need at least
|
|
60 MB more.
|
|
.bullet)
|
|
.if \n[alpha]:\n[i386]:\n[news68k]:\n[newsmips] \{\
|
|
.It
|
|
Creating the boot floppies.
|
|
You can create the floppies needed for installation
|
|
under
|
|
.Tn MS-DOS
|
|
or
|
|
.Tn Windows .
|
|
Supposing your 1.44 MB floppy
|
|
drive is drive A:, and your CD is drive E: do the
|
|
following from an
|
|
.Tn MS-DOS
|
|
command prompt:
|
|
.Pp
|
|
.Dl Ic "e:"
|
|
.Dl Ic "cd \eNetBSD-\*V\ei386\einstallation\emisc"
|
|
.Dl Ic "rawrite"
|
|
.Pp
|
|
When asked for a source filename, answer
|
|
.if \n[i386] \{\
|
|
.Dl Pa \&..\efloppy\eboot1.fs
|
|
for the first diskette and
|
|
.Dl Pa \&..\efloppy\eboot2.fs
|
|
for the second diskette.
|
|
.\}
|
|
.if \n[alpha] .Dl Em \&(...alpha installation root) Ns Pa \efloppy\edisk1of2
|
|
.if \n[news68k] .Dl Pa \eNetBSD-\*V\e\*M\einstallation\efloppy\eboot.fs
|
|
.if \n[newsmips] .Dl Pa \eNetBSD-\*V\e\*M\einstallation\efloppy\eboot.fs
|
|
.Pp
|
|
When asked for a destination drive answer
|
|
.Sq Ic a .
|
|
.It
|
|
To create a bootfloppy under
|
|
.Nx
|
|
or other
|
|
.Ul
|
|
system, you would type something like:
|
|
.Pp
|
|
.Dl # Ic "dd if=.../boot1.fs bs=18k of=/dev/rfd0a"
|
|
.Pp
|
|
.\} \" \n[alpha]:\n[i386]:\n[news68k]:\n[newsmips]
|
|
.if \n[mac68k] \{\
|
|
.It
|
|
The NetBSD Boot Tools folder.
|
|
.(bullet
|
|
Create a Folder on your Mac OS disk for the
|
|
.Nx*M
|
|
components.
|
|
.It
|
|
Copy the Booter application into the newly created Folder.
|
|
Expand the file if necessary to create the Mac OS executable.
|
|
.It
|
|
Copy the Installation Kernels into the newly created Folder.
|
|
It is not necessary to
|
|
.Ic gunzip
|
|
compressed kernel files.
|
|
.It
|
|
Single-click on the Booter application icon then select the "Get Info"
|
|
from the File Menu list.
|
|
Increase the memory allocation for the Booter to as much as possible
|
|
for your system.
|
|
Having a large number of fonts, extensions or sounds installed on your system
|
|
can cause memory exhaustion problems for the Booter if you don't do this.
|
|
Also, the extra memory is needed by the Booter to expand compressed
|
|
kernels while booting.
|
|
.bullet)
|
|
.\}
|
|
.It
|
|
The Quick Installation
|
|
.(bullet
|
|
.ie \n[acorn26]:\n[atari]:\n[cats]:\n[evbppc]:\n[macppc]:\n[pmax]:\n[sgimips]:\n[sparc]:\n[sparc64] \{\
|
|
Boot the system as described above.
|
|
You should be at the
|
|
.Ic sysinst
|
|
main menu.
|
|
.\}
|
|
.el \{\
|
|
.ie \n[mac68k] \{\
|
|
Double-click on the Booter application icon to start executing it.
|
|
From the
|
|
.Ic Options
|
|
pull-down menu, select
|
|
.Ic Monitors ,
|
|
then select
|
|
.Ic Change Monitor Depth
|
|
and make sure B\*&W is highlighted.
|
|
Close the window using the
|
|
.Ic Close
|
|
button.
|
|
.It
|
|
From the
|
|
.Ic Options
|
|
pull-down menu select
|
|
.Ic Boot Options .
|
|
This will bring
|
|
up an option panel.
|
|
Set the
|
|
.Ic Auto-set GMT Bias
|
|
checkbox in the lower left and then select the
|
|
.Ic Boot from Mac OS
|
|
option at the top of the window.
|
|
The
|
|
.Ic Set
|
|
button on the right will become active.
|
|
Use it to locate and
|
|
select the Installation Kernel file appropiate for your hardware.
|
|
This will be either
|
|
.Pa netbsd-INSTALL.gz
|
|
or
|
|
.Pa netbsd-INSTALLSBC.gz .
|
|
Close the window using the
|
|
.Ic Close
|
|
button.
|
|
.It
|
|
From the
|
|
.Ic Options
|
|
pull-down menu select the
|
|
.Ic Boot Now ,
|
|
or use the Apple-B (Command-B) key combination to start the
|
|
.Nx
|
|
boot process.
|
|
Do not move the mouse while the boot operation is in
|
|
progress as this may leave the keyboard locked to
|
|
.Nx .
|
|
.Pp
|
|
The main menu will be displayed.
|
|
.\} \" \n[mac68k]
|
|
.el \{\
|
|
Insert the first boot floppy you just created.
|
|
.ie \n[i386] Restart
|
|
.el Boot
|
|
the computer.
|
|
.if \n[alpha] \{\
|
|
Type
|
|
.Pp
|
|
.Dl \&\*>\*>\*> Ic "B DVA0"
|
|
.Pp
|
|
.\}
|
|
.if \n[i386] When prompted, insert the second boot floppy.
|
|
.if \n[news68k] \{\
|
|
Type
|
|
.Pp
|
|
.Dl \&NEWS\*> Ic "bo fh"
|
|
.Pp
|
|
.\}
|
|
.if \n[newsmips] \{\
|
|
Type
|
|
.Pp
|
|
.Dl \&\*> Ic "bo fd" (in case of NWS-5000)
|
|
.Pp
|
|
or
|
|
.Pp
|
|
.Dl \&\*> Ic "bo fh" (in case of NWS-3xxx)
|
|
.Pp
|
|
.\}
|
|
The main menu will be displayed.
|
|
.\}\}
|
|
.(disp
|
|
.ne 10
|
|
. cs \n(.f 22
|
|
.\" ) - appease vi showmatch
|
|
.***********************************************.
|
|
* NetBSD-2.0 Install System *
|
|
* *
|
|
*\*>a: Install NetBSD to hard disk *
|
|
* b: Upgrade NetBSD on a hard disk *
|
|
* c: Re-install sets or install additional sets *
|
|
* d: Reboot the computer *
|
|
* e: Utility menu *
|
|
* x: Exit Install System *
|
|
.***********************************************.
|
|
. cs \n(.f
|
|
.\" ) - appease vi showmatch
|
|
.disp)
|
|
.It
|
|
If you wish, you can configure some network settings
|
|
immediately by choosing the
|
|
.Me Utility menu
|
|
and then
|
|
.Me Configure network .
|
|
It isn't actually required at this point, but
|
|
it may be more convenient.
|
|
Go back to the main menu.
|
|
.It
|
|
Choose
|
|
.if !\n[macppc] .Me install .
|
|
.if \n[macppc] \{\
|
|
.Me "Utility menu" No then Me "Run /bin/sh"
|
|
for Open Firmware 3 systems. You'll need to create the
|
|
.Nx
|
|
filesystem(s) and an
|
|
.Pa fstab .
|
|
Now exit the shell, return to the main menu, and choose
|
|
.Me "Re-install" .
|
|
.Pp
|
|
Choose
|
|
.Me install
|
|
for Open Firmware 1.0.5, 1.1.22, 2.0.x, and 2.4 systems.
|
|
.\}
|
|
.It
|
|
You will be guided through some steps regarding the
|
|
setup of your disk, and the selection of distributed components
|
|
to install.
|
|
When in doubt, refer to the rest of this document for details.
|
|
.if \n[atari] \{\
|
|
WARNING: If you want your disk to retain an AHDI compatible partitioning,
|
|
make sure to use the 'existing' disk layout.
|
|
.\}
|
|
.if \n[sparc64] \{\
|
|
.Pp
|
|
WARNING: If you are installing onto a disk which you want to use with
|
|
.Tn Solaris ,
|
|
stop here. You will need to perform a manual installation as
|
|
.Ic sysinst
|
|
overwrites the
|
|
.Tn Solaris
|
|
partition table. See the section on
|
|
.Sx "Manual Installation of NetBSD using Solaris"
|
|
.\}
|
|
.It
|
|
After your disk has been prepared, choose
|
|
.ie \n[sgimips] \{\
|
|
.Me Unmounted file system
|
|
as the medium.
|
|
The CD-ROM device is usually cd0 and the partition
|
|
.Sq a
|
|
.Pq i.e. cd0a .
|
|
.\}
|
|
.el \{\
|
|
.Me CD-ROM
|
|
as the medium.
|
|
The default values for the path and device should be ok.
|
|
.\}
|
|
.It
|
|
After all the files have been unpacked, go back to
|
|
the main menu and select
|
|
.ie \n[mac68k]:\n[macppc]:\n[pmax]:\n[sgimips]:\n[sparc]:\n[sparc64] \{\
|
|
.Me reboot.
|
|
.\}
|
|
.el \{\
|
|
.Me reboot ,
|
|
after you have removed the bootfloppy from the drive.
|
|
.\}
|
|
.It
|
|
.if \n[macppc]:\n[sparc64] \{\
|
|
Once the system reaches the Open Firmware prompt, you will need to type
|
|
the correct command to boot from your hard drive.
|
|
.\}
|
|
.if \n[sparc] \{\
|
|
Once the system reaches the PROM prompt, you will need to type the correct
|
|
command to boot from your hard drive.
|
|
.\}
|
|
.if \n[sgimips] \{\
|
|
Once the system reaches the PROM prompt, you will need to modify your
|
|
PROM environment settings for SystemPartition, OSLoadPartition, OSLoader,
|
|
OSLoadFilename and OSLoadOptions and then boot the hard drive.
|
|
.\}
|
|
.Nx
|
|
will now boot.
|
|
If you haven't already done so in
|
|
.Ic sysinst ,
|
|
you should log in as
|
|
.Li root ,
|
|
and set a password for that account.
|
|
You are also advised to edit the file
|
|
.Pa /etc/rc.conf
|
|
to match your system needs.
|
|
.It
|
|
Your installation is now complete.
|
|
.It
|
|
For configuring the X window system, if installed, see the files in
|
|
.Pa /usr/X11R6/lib/X11/doc .
|
|
.if !\n[macppc] \{\
|
|
Further information can be found on
|
|
.Lk http://www.xfree86.org/ .
|
|
.\}
|
|
.if \n[macppc] \{\
|
|
Further information can be found on
|
|
.Lk http://www.NetBSD.org/Ports/macppc/x11.html
|
|
.\}
|
|
.bullet)
|
|
.bullet)
|
|
.It
|
|
.To 2 "Booting NetBSD"
|
|
.Em Booting NetBSD
|
|
.
|
|
.if !\n[acorn26]:\n[atari]:\n[cats]:\n[mac68k]:\n[macppc]:\n[mvme68k]:\n[news68k]:\n[newsmips]:\n[pmax]:\n[sgimips]:\n[sparc]:\n[sparc64]:\n[x68k] \{\
|
|
.(pcmcia
|
|
Unplug your
|
|
.Tn PCMCIA
|
|
devices, so that they won't be found by
|
|
.Nx .
|
|
.pcmcia)
|
|
.\} \" !\n[acorn26]:\n[atari]:\n[cats]:\n[macppc]:\n[mvme68k]:\n[news68k]:\n[pmax]:\n[sgimips]:\n[sparc]:\n[sparc64]:\n[x68k]
|
|
.ie \n[mac68k] \{\
|
|
.Pp
|
|
Prior to attempting to boot
|
|
.Nx*M
|
|
verify that all the following are done:
|
|
.(bullet
|
|
Enable 32-bit addressing in the Memory Control Panel [1].
|
|
.It
|
|
Disable all forms of virtual memory (the Memory Control Panel, RAM Doubler,
|
|
or other software-based memory enhancement products).
|
|
.It
|
|
Place the system in B\*&W Mode (1-bit color or grayscale) as shown in the
|
|
Monitors Control Panel or in the Monitors options dialog of the Booter.
|
|
You may choose to have the Booter do this for you automatically by selecting
|
|
the appropiate check box and radio button in the
|
|
.Ic Monitors
|
|
dialog on the
|
|
.Ic Options
|
|
menu.
|
|
.bullet)
|
|
.Pp
|
|
It is probably best to boot your machine with all extensions turned off [1].
|
|
You can do this by booting into Mac OS with the
|
|
.Key SHIFT
|
|
key held down.
|
|
You may have to restart your Macintosh for changes to take effect before
|
|
proceeding.
|
|
.(tag [1]
|
|
.It [1]
|
|
If your version of the Memory control panel does not have a 32-bit
|
|
addressing mode radio button, this means that your system is already
|
|
32-bit clean and is running in 32-bit addressing mode by default.
|
|
If the Booter complains that your are not in 32-bit mode, it may be necessary
|
|
for you to press the "Use Defaults" button in the Memory control panel to
|
|
restore 32-bit addressing.
|
|
You should probably reboot after doing so.
|
|
If you have an older II-class system (including the II, IIx, IIcx,
|
|
and SE/30), it is necessary to install Connectix's MODE32 to work around
|
|
ROM issues which prevent you from enabling 32-bit addressing.
|
|
Please see the
|
|
.Nx*M
|
|
FAQ at
|
|
.Lk http://www.NetBSD.org/Ports/mac68k/faq/
|
|
for more information.
|
|
.tag)
|
|
.Pp
|
|
Double-click on the
|
|
.Nx*M
|
|
Booter icon to start the application.
|
|
Select
|
|
.Ic Booting
|
|
from the
|
|
.Ic Options
|
|
menu.
|
|
Select the Kernel Location to be from Mac OS with the filename
|
|
corresponding to the name of the Installation Kernel you are using.
|
|
Typically this will be netbsd-INSTALL.gz.
|
|
.Pp
|
|
If you haven't already put your Macintosh into B\*&W mode, select the
|
|
.Ic Monitor Options
|
|
from the
|
|
.Ic Options
|
|
menu and check the box for B\*&W mode.
|
|
.Pp
|
|
Try booting
|
|
.Nx
|
|
by selecting
|
|
.Ic Boot Now
|
|
from the
|
|
.Ic Options
|
|
menu.
|
|
.Pp
|
|
If the system does not come up, send mail to
|
|
.Mt port-mac68k@NetBSD.org
|
|
describing your software, your hardware, and as complete a description of
|
|
the problem as you can.
|
|
As an alternative, try using the Traditional
|
|
method of installation described in the next section.
|
|
.\} \" \n[mac68k]
|
|
.el \{\
|
|
.ie \n[acorn26]:\n[cats]:\n[evbppc]:\n[macppc]:\n[pmax]:\n[sgimips]:\n[sparc]:\n[sparc64] \{\
|
|
.Pp
|
|
You may want to read the
|
|
boot messages, to notice your disk's name and capacity.
|
|
Its name will be something like
|
|
.Li sd0
|
|
.if \n[acorn26]:\n[cats]:\n[evbppc]:\n[macppc]:\n[sparc64] \{\
|
|
or
|
|
.Li wd0
|
|
.\}
|
|
and the geometry will be
|
|
printed on a line that begins with its name.
|
|
As mentioned above, you may need your disk's geometry when creating
|
|
.Nx 's
|
|
partitions.
|
|
You will also need to know the name, to tell
|
|
.Ic sysinst
|
|
on which disk
|
|
to install.
|
|
The most important thing to know is that
|
|
.if \n[acorn26]:\n[cats]:\n[evbppc]:\n[macppc]:\n[sparc64] \{\
|
|
.Li wd0
|
|
is
|
|
.Nx 's
|
|
name for your first IDE disk,
|
|
.Li wd1
|
|
the second, etc.
|
|
.\}
|
|
.Li sd0
|
|
is your first SCSI disk,
|
|
.Li sd1
|
|
the second, etc.
|
|
.\}
|
|
.el \{\
|
|
.
|
|
.
|
|
.Pp
|
|
.ie \n[atari] \{\
|
|
Boot the system as described in the "Booting the installer" section above.
|
|
.\}
|
|
.el \{\
|
|
Boot your machine.
|
|
The boot loader will start, and will print a countdown and begin booting.
|
|
.Pp
|
|
If the boot loader messages do not appear in a reasonable
|
|
amount of time, you either have a bad boot floppy or a
|
|
hardware problem.
|
|
Try writing the install floppy image to
|
|
a different disk, and using that.
|
|
.\}
|
|
.if \n[i386] \{\
|
|
.Pp
|
|
If that doesn't work, try booting after disabling your CPU's
|
|
internal and external caches (if any).
|
|
If it still doesn't work,
|
|
.Nx
|
|
probably can't be run on your hardware.
|
|
This can probably be considered a bug, so you might want to report it.
|
|
If you do, please include as many details about your system
|
|
configuration as you can.
|
|
.\}
|
|
.Pp
|
|
It will take a while to load the kernel
|
|
.ie !\n[mac68k] \{\
|
|
from the floppy,
|
|
.\}
|
|
.el ,
|
|
probably around a minute or so, then, the kernel boot messages
|
|
will be displayed.
|
|
This may take a little while also, as
|
|
.Nx
|
|
will be probing your system to discover which hardware devices are
|
|
installed.
|
|
.if \n[atari]:\n[i386] \{\
|
|
You may want to read the
|
|
boot messages, to notice your disk's name and geometry.
|
|
Its name will be something like
|
|
.Li sd0
|
|
or
|
|
.Li wd0
|
|
and the geometry will be
|
|
printed on a line that begins with its name.
|
|
As mentioned above, you may need your disk's geometry when creating
|
|
.Nx 's
|
|
partitions.
|
|
You will also need to know the name, to tell
|
|
.Ic sysinst
|
|
on which disk
|
|
to install.
|
|
.\}
|
|
The most important thing to know is that
|
|
.Li wd0
|
|
is
|
|
.Nx 's
|
|
name for your first IDE disk,
|
|
.Li wd1
|
|
the second, etc.
|
|
.Li sd0
|
|
is your first SCSI disk,
|
|
.Li sd1
|
|
the second, etc.
|
|
.Pp
|
|
.if !\n[atari]:\n[mac68k] \{\
|
|
Note that once the system has finished booting, you need not
|
|
leave the floppy in the disk drive.
|
|
.\}
|
|
.if \n[i386] \{\
|
|
Earlier version of
|
|
the
|
|
.Nx
|
|
install floppies mounted the floppy as the system's
|
|
root partition
|
|
.Pq Pa / ,
|
|
but the new installation floppies use a
|
|
ramdisk file system and are no longer dependent on the floppy
|
|
once it has booted.
|
|
.\}
|
|
.\}\}
|
|
.Pp
|
|
Once
|
|
.Nx
|
|
has booted and printed all the boot messages,
|
|
you will be presented with a welcome message and a main menu.
|
|
It will also include instructions for using the menus.
|
|
.It
|
|
.To 2 "Network configuration"
|
|
.Em Network configuration
|
|
.if !\n[acorn26]:\n[atari]:\n[cats]:\n[mac68k]:\n[macppc]:\n[mvme68k]:\n[news68k]:\n[newsmips]:\n[pmax]:\n[sgimips]:\n[sparc]:\n[sparc64]:\n[x68k] \{\
|
|
.(pcmcia
|
|
You can skip this section, as you will only get data
|
|
from floppy in the first part of the install.
|
|
.pcmcia)
|
|
.\} \" !\n[acorn26]:\n[atari]:\n[cats]:\n[mac68k]:\n[macppc]:\n[mvme68k]:\n[news68k]:\n[newsmips]:\n[pmax]:\n[sgimips]:\n[sparc]:\n[sparc64]:\n[x68k]
|
|
.Pp
|
|
If you will not use network operation during the installation,
|
|
but you do want your machine to be configured for networking once
|
|
it is installed, you should first go to the
|
|
.Me Utility menu ,
|
|
and select the
|
|
.Me Configure network
|
|
option.
|
|
If you only want to temporarily
|
|
use networking during the installation, you can specify these
|
|
parameters later.
|
|
If you are not using the Domain Name System (DNS),
|
|
you can give an empty response in reply to answers relating to
|
|
this.
|
|
.if \n[mac68k] \{\
|
|
.It
|
|
.To 2 "Preparing a disk for Mac OS and NetBSD"
|
|
.Em "Preparing a disk for"
|
|
.Tn Mac OS
|
|
.Em and NetBSD
|
|
.Pp
|
|
.Ic sysinst
|
|
can manipulate the Apple Disk Partition Map allowing you to partition
|
|
your disk for use with
|
|
.Nx .
|
|
It does not support resizing existing
|
|
.Tn Mac OS
|
|
HFS disk partitions.
|
|
If there is insufficient Free space on the disk to support an installation of
|
|
.Nx
|
|
you will need to backup, repartition and restore your existing
|
|
.Tn Mac OS
|
|
partitions before proceeding.
|
|
You may choose to use a Traditional method of creating disk partitions for
|
|
.Nx
|
|
if you wish.
|
|
They can still be used by
|
|
.Ic sysinst
|
|
for a
|
|
.Nx
|
|
installation.
|
|
.\} \" \n[mac68k]
|
|
.if \n[macppc] \{\
|
|
.It
|
|
.To 2 "Preparing a disk for Open Firmware 3 systems"
|
|
.Em "Preparing a disk which will be used for Open Firmware 3 systems"
|
|
.Pp
|
|
Skip this step if you are installing
|
|
.Nx
|
|
on an Open Firmware 1 or 2 system.
|
|
.Pp
|
|
Go to the
|
|
.Me "Utility Menu" ,
|
|
and select the
|
|
.Me "Run /bin/sh"
|
|
option which will give you a shell prompt.
|
|
From this shell prompt, you will do some of the steps that the normal
|
|
install procedure runs automatically.
|
|
Unfortunately, at the moment, our install tools
|
|
aren't smart enough to deal with drives with Apple Partition Maps
|
|
and will overwrite important information describing your partitions.
|
|
.Pp
|
|
You may need to type one of the following commands to get your delete key
|
|
to work properly, depending on your keyboard:
|
|
.Dl # Ic "stty erase '^h'"
|
|
.Dl # Ic "stty erase '^?'"
|
|
.Pp
|
|
Type the following command (replacing
|
|
.Pa wd0
|
|
with the name of your destination hard drive):
|
|
.Dl # Ic "disklabel wd0"
|
|
.Pp
|
|
This will print out the partition info that was generated by
|
|
.Ic pdisk ,
|
|
Drive Setup, or Disk Utility. Note that, as discussed above in the
|
|
.Sx Partitioning your hard drive for NetBSD
|
|
section, your
|
|
.Em "A/UX Root"
|
|
typically is the first partition
|
|
.Pq Em a
|
|
and your
|
|
.Em "A/UX Swap"
|
|
typically is the second partition
|
|
.Pq Em b .
|
|
You may also find that your
|
|
.Em "A/UX User"
|
|
partition is the seventh partition
|
|
.Pq Em g .
|
|
For example:
|
|
.(disp
|
|
.Dl # Ic "disklabel wd0"
|
|
[...]
|
|
# size offset fstype [fsize bsize cpg/sgs]
|
|
a: 426613 837432 4.2BSD 0 0 0 # (Cyl. 1622*- 2449*)
|
|
b: 204800 632632 swap # (Cyl. 1226*- 1622*)
|
|
c: 2134305 0 unused 0 0 # (Cyl. 0 - 4136*)
|
|
d: 426616 1216 HFS # (Cyl. 2*- 829*)
|
|
e: 204800 427832 HFS # (Cyl. 829*- 1226*)
|
|
f: 21 2134284 unknown # (Cyl. 4136*- 4136*)
|
|
g: 870239 1264045 4.2BSD 0 0 0 # (Cyl. 2449*- 4136*)
|
|
disklabel: boot block size 0
|
|
disklabel: super block size 0
|
|
.disp)
|
|
.Pp
|
|
Now, you need to create file systems on the partitions that
|
|
.Nx
|
|
will be using.
|
|
.Pp
|
|
.Em "Do not modify any partitions labeled"
|
|
.Pa HFS ,
|
|
.Pa UFS ,
|
|
.Em or
|
|
.Pa unknown .
|
|
The partitions you will be using have their
|
|
.Pa fstype
|
|
listed as
|
|
.Pa 4.2BSD .
|
|
.Pp
|
|
Run the
|
|
.Ic newfs
|
|
command on the
|
|
.Pa 4.2BSD
|
|
partitions:
|
|
.(disp
|
|
.Dl # Ic "newfs /dev/wd0a"
|
|
newfs: /dev/wd0a: not a character-special device
|
|
Warning: 120 sector(s) in last cylinder unallocated
|
|
/dev/wd0a: 426612 sectors in 827 cylinders of 4 tracks, 129 sectors
|
|
208.3MB in 52 cyl groups (16 c/g, 4.03MB/g, 1024 i/g)
|
|
super-block backups (for fsck -b #) at:
|
|
32, 8432, 16832, 25232, 33056, 41456, 49856, 58256, 66080,
|
|
74480, 82880, 91280, 99104, 107504, 115904, 124304, 132128, 140528,
|
|
148928, 157328, 165152, 173552, 181952, 190352, 198176, 206576, 214976,
|
|
223376, 231200, 239600, 248000, 256400, 264224, 272624, 281024, 289424,
|
|
297248, 305648, 314048, 322448, 330272, 338672, 347072, 355472, 363296,
|
|
371696, 380096, 388496, 396320, 404720, 413120, 421520,
|
|
newfs: ioctl (WDINFO): Invalid argument
|
|
newfs: /dev/wd0a: can't rewrite disk label
|
|
.disp)
|
|
You can ignore the
|
|
.Pa Sq "not a character-special device" ,
|
|
.Pa Sq "sector(s) in last cylinder unallocated" ,
|
|
.Pa Sq "ioctl (WDINFO): Invalid argument" ,
|
|
and
|
|
.Pa Sq "can't rewrite disk label"
|
|
warnings.
|
|
.Pp
|
|
Now you need to mount your destination root partition:
|
|
.Dl # Ic "mount /dev/wd0a /mnt"
|
|
.Pp
|
|
Make an
|
|
.Pa fstab
|
|
file for your new system (right now, you only really need to include
|
|
.Pa / ,
|
|
.Pa /usr ,
|
|
and
|
|
.Pa swap ) ,
|
|
for example:
|
|
.Dl # Ic "mkdir /mnt/etc"
|
|
.Dl # Ic "cat \*> /mnt/etc/fstab"
|
|
.Dl "/dev/wd0a / ffs rw 1 1"
|
|
.Dl "/dev/wd0b none swap sw 0 0"
|
|
.Dl "/dev/wd0g /usr ffs rw 1 2"
|
|
.Pp
|
|
If you mess up while typing, you can press
|
|
.Key CONTROL-U
|
|
to erase everything on the current line, or
|
|
.Key CONTROL-C
|
|
to cancel the file creation, so you can start over.
|
|
.Key CONTROL-D
|
|
finishes and writes the file to disk.
|
|
.Pp
|
|
Great, now create the mountpoints for the file systems you listed in the
|
|
.Pa fstab :
|
|
.Dl # Ic "mkdir /mnt/usr"
|
|
.Pp
|
|
Clean up and return to
|
|
.Ic sysinst :
|
|
.Dl # Ic "cd /"
|
|
.Dl # Ic "umount /mnt"
|
|
.Dl # Ic exit
|
|
.\} \" \n[macppc]
|
|
.It
|
|
.To 2 "Installation drive selection and parameters"
|
|
.Em Installation drive selection and parameters
|
|
.Pp
|
|
To start the
|
|
.if \n[macppc] \{\
|
|
installation onto a dedicated
|
|
.Nx
|
|
drive (Open Firmware 1 or 2),
|
|
.\}
|
|
.if !\n[macppc] installation,
|
|
select
|
|
.Me Install NetBSD to hard disk
|
|
from the main menu.
|
|
.if \n[mac68k] \{\
|
|
To start the installation, select the menu option in install
|
|
.Nx
|
|
from the main menu.
|
|
.\}
|
|
.if \n[macppc] \{\
|
|
To start the installation onto a drive with an Apple Partition Map (Open
|
|
Firmware 3), select
|
|
.Me Re-install sets or install additional sets
|
|
from the main menu.
|
|
.\}
|
|
.Pp
|
|
The first thing is to identify the disk on which you want to
|
|
install
|
|
.Nx .
|
|
.Ic sysinst
|
|
will report a list of disks it finds
|
|
and ask you for your selection.
|
|
Depending on how many disks are found, you may get a different message.
|
|
You should see disk names like
|
|
.ie \n[pmax] \{\
|
|
.Li rz0
|
|
or
|
|
.Li rz1
|
|
.\}
|
|
.el \{\
|
|
.if \n[acorn26]:\n[alpha]:\n[cats]:\n[i386]:\n[mac68k]:\n[macppc]:\n[sparc64] \{\
|
|
.Li wd0 ,
|
|
.Li wd1 ,
|
|
.\}
|
|
.Li sd0
|
|
or
|
|
.Li sd1 .
|
|
.if \n[i386] \{\
|
|
.Pp
|
|
.Ic sysinst
|
|
next tries to figure out the real and BIOS geometry
|
|
of your disk.
|
|
It will present you with the values it found,
|
|
if any, and will give you a chance to change them.
|
|
.\}
|
|
.if \n[mac68k] \{\
|
|
.Pp
|
|
.Ic sysinst
|
|
next tries to figure out how the selected volume has been partitioned.
|
|
It does this by reading the Apple Disk Partition Map from the disk.
|
|
If the disk does not have a Partition Map,
|
|
.Ic sysinst
|
|
will give you the option of writing one, but doing so will not make
|
|
the disk a Mac OS bootable volume.
|
|
You will have the option of creating HFS partitions that may be
|
|
subsequentially initialized and used under Mac OS though.
|
|
.\}
|
|
.Pp
|
|
.if \n[i386] \{\
|
|
Next, depending on whether you are using a
|
|
.Li wd Ns Ar X
|
|
or
|
|
.Li sd Ns Ar X
|
|
disk,
|
|
you will either be asked for the type of disk
|
|
.Pq Li wd Ns Ar X
|
|
you are
|
|
using or you will be asked if you want to specify a fake geometry
|
|
for your SCSI disk
|
|
.Pq Li sd Ns Ar X .
|
|
The types of disk are be
|
|
.Tn IDE, ST-506
|
|
or
|
|
.Tn ESDI .
|
|
If you're installing on an
|
|
.Tn ST-506
|
|
or
|
|
.Tn ESDI
|
|
drive, you'll be asked if your disk supports automatic sector forwarding.
|
|
If you are
|
|
.Em sure
|
|
that it does, reply affirmatively.
|
|
Otherwise, the install program will automatically reserve space for
|
|
bad144 tables.
|
|
.\}
|
|
.if \n[macppc] \{\
|
|
If
|
|
.Ic sysinst
|
|
reports
|
|
.Dl "I can not find any hard disk for use by NetBSD"
|
|
or the drive you wish to install onto is missing, then you should look at
|
|
the FAQ entry
|
|
.Lk http://www.NetBSD.org/Ports/macppc/faq.html#nodisk
|
|
.\}
|
|
.\}
|
|
.It
|
|
.To 2 "Partitioning the disk"
|
|
.Em Partitioning the disk
|
|
.if \n[atari] \{\
|
|
.(bullet
|
|
Preparing a disk which will be used for
|
|
.Tn GEM
|
|
and
|
|
.Nx .
|
|
.Pp
|
|
You will be prompted if you want an AHDI compatible partitioning on your disk.
|
|
If you are installing
|
|
.Nx
|
|
on a dedicated drive, just answer 'no' and skip to the next section.
|
|
.Pp
|
|
If you answer 'yes', the
|
|
.Ic ahdilabel
|
|
program is started.
|
|
You can now change the AHDI partition ID's on your root disk.
|
|
Because NetBSD imposes a special ordering in disk partitions it uses
|
|
for / (root) and swap.
|
|
Also, because it wants to guard you against an unwanted
|
|
demolition of partitions used by other systems, you have to tell it what
|
|
partitions it is allowed to use.
|
|
You have to mark the partition you want to use as swap SWP or
|
|
(depricated!) NBS and the other partitions as NBD.
|
|
Note that all the changes you make to the ID's are reversable as long as
|
|
you remember the original value.
|
|
As of NetBSD 1.5, ahdilabel is capable of creating or changing an
|
|
AHDI compatible partioning on the disk!
|
|
In the partition-ID editor, the partitions are shown in the order that AHDI
|
|
created them.
|
|
When you leave this editor and continue with
|
|
.Ic sysinst,
|
|
your changes to the ID's do have consequences to the partition order!
|
|
They will show up as follows:
|
|
.(tag 13n -offset indent
|
|
.It Li a
|
|
the first NBD partition
|
|
.It Li b
|
|
the first SWP (or NBS) partition
|
|
.It Li d (and up)
|
|
the rest of the partitions in AHDI order
|
|
.tag)
|
|
.bullet)
|
|
.\} \" \n[atari]
|
|
.if \n[macppc] \{\
|
|
.Pp
|
|
You can skip a few steps, down to
|
|
.Em Sq "Getting the distribution sets" ,
|
|
if you are installing onto a drive with an Apple Partition Map (Open
|
|
Firmware 3), i.e. you selected
|
|
.Me "Re-install sets or install additional sets"
|
|
from the main menu.
|
|
.\} \" \n[macppc]
|
|
.if \n[sgimips] \{\
|
|
.(bullet
|
|
Please note that shared installs of
|
|
.Tn IRIX
|
|
and
|
|
.Nx
|
|
on the same drive have not been tested, and as such may cause problems
|
|
or may not work. It is
|
|
.Em strongly
|
|
recommended that all data is backed before attempting such installs.
|
|
.bullet)
|
|
.\} \" \n[sgimips]
|
|
.if !\n[atari]:\n[macppc]:\n[sgimips] \{\
|
|
.(bullet
|
|
Which portion of the disk to use.
|
|
.Pp
|
|
You will be asked if you want to use the entire disk or
|
|
only part of the disk.
|
|
If you decide to use the entire disk for
|
|
.Nx ,
|
|
it will be checked if there are already other
|
|
systems present on the disk, and you will be asked to confirm
|
|
whether you want to overwrite these.
|
|
.if \n[mac68k] \{\
|
|
.It
|
|
Definition of the NetBSD disklabel.
|
|
.Pp
|
|
The Apple Disk Partition Map is used to create an in-core map of the
|
|
disk called the disklabel.
|
|
A minimum of two NetBSD partitions will be required,
|
|
one for root and one for swap.
|
|
Up to eight partitions may be used by NetBSD.
|
|
Up to 32 partitions may exist on the disk which
|
|
can be any combination of Mac OS HFS, Free, Scratch and
|
|
.Nx
|
|
partitions, although only the first eight which meet the needs of
|
|
.Nx
|
|
will be seen and mapped to the
|
|
.Nx
|
|
disklabel.
|
|
.Pp
|
|
Some partitions in the disklabel have a fixed purpose.
|
|
Partition 'a' is always the root partition, 'b' is the swap partition
|
|
and 'c' is the entire disk.
|
|
Partitions 'd' through 'h' are available for other use.
|
|
Traditionally, 'g' is the partition mounted on the /usr directory, but
|
|
this is historical practice, not a fixed value.
|
|
.It
|
|
Editing the
|
|
.Nx
|
|
Disklabel (and the underlying Apple Disk Partition Map).
|
|
.Pp
|
|
You will be presented with the current layout of the disk as seen by
|
|
.Nx ,
|
|
and given a change to change it.
|
|
(Even though
|
|
.Nx
|
|
can only use the first eight qualified partitions, all partitions
|
|
found on the disk will be displayed.)
|
|
The partitions found on the disk will be shown in the top section of
|
|
the display.
|
|
Each will be identified with the name assigned by
|
|
.Nx ,
|
|
the current size, offset, type, use and mount point.
|
|
The partition currently being modified will be highlighted in inverse video.
|
|
The bottom part of the display will list the operations which may be
|
|
performed on the selected (highlighted) partition.
|
|
The options are:
|
|
.(bullet
|
|
Select next partition
|
|
.Pp
|
|
This highlights the next partition in the upper display list and makes it
|
|
the current one selected for manipulation.
|
|
.It
|
|
Change selected partition
|
|
.Pp
|
|
This changes the type assigned to the partition.
|
|
A partition may be assigned for use as a
|
|
.Nx
|
|
Root, SWAP, Usr, or Root&Usr; it may be assigned for use as a Mac OS HFS
|
|
partition; a Scratch (for later reassignment); or a Free partition.
|
|
Free partitions which are physically adjacent to each other will be collapsed
|
|
into a single Free partition.
|
|
.It
|
|
Set mount point for partition
|
|
.Pp
|
|
This designates the
|
|
.Nx
|
|
file system mount point for the partition, and gets transferred into
|
|
the /etc/fstab definition so
|
|
.Nx
|
|
knows where to mount the file system on subsequent boots.
|
|
The option only applies to
|
|
.Nx
|
|
Root, Usr, Root&Usr or Mac OS HFS partitions, although currently HFS access
|
|
is not supported without optional software components.
|
|
A common set of predefined mount points (/usr, /home, /var, /tmp or None)
|
|
will be presented to you to assist you in defining the most commonly used,
|
|
but you may enter you own names if you choose.
|
|
Selecting "None" will clear the mount point name and keep the partition
|
|
from being defined in the resulting
|
|
.Pa /etc/fstab
|
|
file.
|
|
.It
|
|
Split selected partition
|
|
.Pp
|
|
This option divides the selected partition into two separate partitions
|
|
if there is space available in the Disk Partition Map.
|
|
You will be prompted for the size of the first segment and the remaining
|
|
portion will be allocated to the second segment.
|
|
The first segment will be designated as a Scratch type, and the second
|
|
will be designated as a Free type.
|
|
To clear a split, or remerge two adjacent partitions into a
|
|
single one, change both to be Free types.
|
|
.Ic sysinst
|
|
will merge them and update the display.
|
|
.Pp
|
|
This is the primary option used to partition the disk since it allows
|
|
you to sub-divide the selected partition into two partitions.
|
|
Changing the types associated with the resulting two parts, or splitting the
|
|
second part further sub-divides the original partition.
|
|
.It
|
|
Page Up, Page Down
|
|
.Pp
|
|
These entries allow you to scroll the upper display if more than
|
|
eight partitions currently exist on the disk.
|
|
.It
|
|
Fix selected partition
|
|
.Pp
|
|
This option reviews the partition's size and starting address and fixes
|
|
the values if they overlap any adjacent partition.
|
|
This is primarily a debugging option and shouldn't be necesary during a
|
|
normal installation.
|
|
However, some 3rd party disk formatters have been known to create
|
|
bogus entries in the Apple Disk Partition Map, and this option can aid
|
|
is repairing these entries.
|
|
.It
|
|
Exit
|
|
.Pp
|
|
This option completes the disk partitioning and returns you to the
|
|
previous installation menu.
|
|
At that point you will be given one last opportunity to bail out before
|
|
committing the changes to the Disk Partition Map recorded on the disk.
|
|
.bullet)
|
|
.Pp
|
|
.It
|
|
Recommended approach to partitioning
|
|
.Pp
|
|
The simplest method of approaching disk partitioning with
|
|
.Ic sysinst
|
|
is to convert everything that can be used for
|
|
.Nx
|
|
into a Free type partition.
|
|
This will allow
|
|
.Ic sysinst
|
|
to collapse and merge all the available space.
|
|
Then cycle through the Select, Split, Select, Change, and Set Mount Point
|
|
options for each of the
|
|
.Nx
|
|
partitions that are desired.
|
|
Since
|
|
.Nx*M
|
|
has a very specific
|
|
mount order for partitions during system boot, it is best to create your
|
|
.Nx
|
|
partitions in the following order: Root, SWAP, Usr where the partitions
|
|
will be mounted in order on 'a', 'b', 'g', 'd', 'e', 'f', and 'h'.
|
|
.Pp
|
|
At least one Root or Root&Usr is required, and a SWAP partition is
|
|
highly desirable.
|
|
As a general rule you will need twice as much swap
|
|
space as you have RAM, more if you plan on running X, Web applications
|
|
or doing heavy development in a multi-user environment.
|
|
The Root partition, if it is separate from your Usr, usually requires about
|
|
24 MB.
|
|
.Pp
|
|
If multiple Root partitions are defined, the second is usually
|
|
mounted on /altusr by default.
|
|
.Nx*M
|
|
automatically mounts all
|
|
Root partitions after the first as Usr type partitions.
|
|
However, it is best to be very specific about mount points and partition
|
|
type and use.
|
|
.\} \" \n[mac68k]
|
|
.bullet)
|
|
.if \n[i386] \{\
|
|
.Pp
|
|
If you want to use the entire disk for
|
|
.Nx ,
|
|
you can skip
|
|
the following section and go to
|
|
.Em "Editing the NetBSD disklabel" .
|
|
.It
|
|
.Em "Editing the Master Boot Record"
|
|
.Pp
|
|
First, you will be prompted to specify the units of size
|
|
that you want to express the sizes of the partitions in.
|
|
You can either pick megabytes, cylinders or sectors.
|
|
.Pp
|
|
After this, you will be presented with the current values
|
|
stored in the MBR, and will be given the opportunity to
|
|
change, create or delete partitions.
|
|
For each partition you can set the type, the start and the size.
|
|
Setting the type to
|
|
.Ic unused
|
|
will delete a partition.
|
|
You can also mark a partition as active, meaning that this is
|
|
the one that the BIOS will start from at boot time.
|
|
.Pp
|
|
Be sure to mark the partition you want to boot from as active!
|
|
.Pp
|
|
After you are done editing the MBR, a sanity check
|
|
will be done, checking for partitions that overlap.
|
|
Depending on the BIOS capabilities of your machine and the
|
|
parameters of the
|
|
.Nx
|
|
partition you have specified, you
|
|
may also be asked if you want to install newer bootcode in your MBR.
|
|
If you have multiple operating systems on the
|
|
disk that you are installing on, you will also be given
|
|
the option to install a bootselector, that will allow you
|
|
to pick the operating system to start up when your computer
|
|
is (re-)started.
|
|
.Pp
|
|
If everything is ok, you can go on to the next step,
|
|
editing the
|
|
.Nx
|
|
disklabel.
|
|
.Pp
|
|
.\} \" \n[i386]
|
|
.\} \" !\n[atari]:\n[macppc]:\n[sgimips]
|
|
.
|
|
.if !\n[mac68k] \{\
|
|
.It
|
|
.Em Editing the NetBSD disklabel
|
|
.Pp
|
|
The partition table of the
|
|
.Nx
|
|
part of a disk is called a
|
|
.Em disklabel .
|
|
.if \n[macppc] \{\
|
|
In actuality,
|
|
.Nx*M
|
|
uses an Apple Partition Map.
|
|
The installer creates something like a real
|
|
Apple Partition Map, but it is not compatible with
|
|
.Tn Mac OS
|
|
or Open Firmware,
|
|
which is one of the reasons why you cannot use this installer to partition
|
|
a disk that can be used with
|
|
.Tn Mac OS
|
|
or Open Firmware 3 systems.
|
|
.Pp
|
|
.\}
|
|
.if \n[sparc] \{\
|
|
.Nx
|
|
disklabels on \*M are compatible with the boot ROMs, and with
|
|
.Tn SunOS
|
|
and
|
|
.Tn Solaris .
|
|
.\}
|
|
There are 4 layouts for the
|
|
.Nx
|
|
part of the disk that you can pick from:
|
|
.Ic Standard, Standard with X, Custom
|
|
and
|
|
.Ic Use Existing .
|
|
The first two use a set of default values (that you can change)
|
|
suitable for a normal installation, possibly including X.
|
|
With the
|
|
.Ic Custom
|
|
option you can specify everything yourself.
|
|
The last option uses the partition info already present on the disk.
|
|
.Pp
|
|
.if \n[atari] \{\
|
|
If you want to use
|
|
.Nx
|
|
on an AHDI partitioned disk, you will have to use:
|
|
.Ic Use Existing .
|
|
.Pp
|
|
.\}
|
|
You will be presented with the current layout of the
|
|
.Nx
|
|
disklabel, and given a chance to change it.
|
|
For each partition, you can set the type, offset and size,
|
|
block and fragment size, and the mount point.
|
|
The type that
|
|
.Nx
|
|
uses for normal file storage is called
|
|
.Sy 4.2BSD .
|
|
A swap partition has a special type called
|
|
.Sy swap .
|
|
.
|
|
.if \n[i386] \{\
|
|
You can also specify a partition as type
|
|
.Sy MSDOS .
|
|
This is useful if you share the disk with
|
|
.Tn MS-DOS
|
|
or
|
|
.Tn Windows ;
|
|
.Nx
|
|
is able to access the files on these partitions.
|
|
You can use the values from the MBR for the
|
|
.Tn MS-DOS
|
|
part of the disk to specify the partition of type
|
|
.Sy MSDOS
|
|
(you don't have to do this now, you can always re-edit
|
|
the disklabel to add this once you have installed
|
|
.Nx ).
|
|
.Pp
|
|
.\}
|
|
.
|
|
Some partitions in the disklabel have a fixed purpose.
|
|
.(tag 6n -offset indent
|
|
.It Li a
|
|
Root partition
|
|
.Pq Pa /
|
|
.It Li b
|
|
Swap partition.
|
|
.It Li c
|
|
The
|
|
.Nx
|
|
portion of the disk.
|
|
.if !'c'\*[part_raw]' \{\
|
|
.It Li \*[part_raw]
|
|
The entire disk.
|
|
.\}
|
|
.if \n[sgimips] \{\
|
|
.It Li d
|
|
The SGI volume header (boot partition)
|
|
.\}
|
|
.It Li \*[part_free]-\*[part_max]
|
|
Available for other use.
|
|
Traditionally,
|
|
.Li \*[part_usr]
|
|
is the partition mounted on
|
|
.Pa /usr ,
|
|
but this is historical practice and not a fixed value.
|
|
.tag)
|
|
.\} \" !\n[mac68k]
|
|
.
|
|
.Pp
|
|
You will then be asked to name your disk's disklabel.
|
|
The default response is
|
|
.Dq Sy mydisk .
|
|
For most purposes this will be OK.
|
|
If you choose to name it something different, make sure the name
|
|
is a single word and contains no special characters.
|
|
You don't need to remember this name.
|
|
.\}
|
|
.Pp
|
|
.It
|
|
.To 2 "Preparing your hard disk"
|
|
.Em Preparing your hard disk
|
|
.Pp
|
|
.Em "You are now at the point of no return".
|
|
.ie \n[atari] \{\
|
|
Apart from the changes you made with
|
|
.Ic ahdilabel
|
|
nothing has been modified on your disk yet.
|
|
If you confirm that you want to install
|
|
.Nx ,
|
|
the partitions now assigned to
|
|
.Nx
|
|
will be actually written to.
|
|
.\}
|
|
.el \{\
|
|
Nothing has been
|
|
written to your disk yet, but if you confirm that you want to
|
|
install
|
|
.Nx ,
|
|
your hard drive will be modified.
|
|
.\}
|
|
If you are sure you want to proceed, enter
|
|
.Li yes
|
|
at the prompt.
|
|
.Pp
|
|
The install program will now label your disk and make the file
|
|
systems you specified.
|
|
The file systems will be initialized to contain
|
|
.Nx
|
|
bootstrapping binaries and configuration files.
|
|
You will see messages on your screen from the various
|
|
.Nx
|
|
disk preparation tools that are running.
|
|
There should be no errors in this section of the installation.
|
|
If there are, restart from the beginning of the installation process.
|
|
Otherwise, you can continue the installation program
|
|
after pressing the return key.
|
|
.if \n[i386] \{\
|
|
.Pp
|
|
.(Note
|
|
In previous versions of
|
|
.Nx ,
|
|
the kernel from the
|
|
install floppy was copied onto the hard drive in a special step.
|
|
In the current install system, the kernel on the floppy is
|
|
unsuited to being copied onto the hard drive.
|
|
Instead, a new set,
|
|
.Sy kern ,
|
|
has been added which contains a generic kernel to
|
|
be unloaded onto the drive.
|
|
So, you can not boot from your hard drive yet at this point.
|
|
.Note)
|
|
.\}
|
|
.if \n[macppc] \{\
|
|
.Pp
|
|
.(Note
|
|
The bootstrapping code installed in this step will
|
|
.Em not
|
|
boot a machine with Open Firmware 3.
|
|
You will still need to have
|
|
.Pa ofwboot.xcf
|
|
on an HFS or HFS+ partition.
|
|
.Note)
|
|
.\}
|
|
.It
|
|
.To 2 "Getting the distribution sets"
|
|
.Em Getting the distribution sets
|
|
.if \n[i386] \{\
|
|
.(pcmcia
|
|
.
|
|
Load a kernel tar file (i.e. the
|
|
.Pa kern-GENERIC.tgz
|
|
set file)
|
|
on to your hard disk, for example by mounting the
|
|
hard disk first, copying the
|
|
.Pa kern-GENERIC.tgz
|
|
file from floppy and unpacking it.
|
|
Example:
|
|
.Pp
|
|
.Dl # Ic "mount /dev/wd0a /mnt"
|
|
.Dl # Ic "cd /mnt"
|
|
.Pp
|
|
.D1 Em "repeat the following 3 steps until all kern.* files are there"
|
|
.Dl # Ic "mount -t msdos /dev/fd0a /mnt2"
|
|
.Dl # Ic "cp /mnt2/kern.* ."
|
|
.Dl # Ic "umount /mnt2"
|
|
.Dl # Ic "cat kern.* \&| tar zxpvf -"
|
|
.Pp
|
|
Then halt the machine using the
|
|
.Ic halt
|
|
command.
|
|
Power the machine down, and re-insert all the
|
|
.Tn PCMCIA
|
|
devices.
|
|
Remove any floppy from the floppy drive.
|
|
Start the machine up.
|
|
After booting
|
|
.Nx ,
|
|
you will
|
|
be presented with the main
|
|
.Ic sysinst
|
|
menu.
|
|
Choose the option to re-install sets.
|
|
Wait for the file system checks that it will do to finish, and then proceed
|
|
as described below.
|
|
.pcmcia)
|
|
.\}
|
|
.Pp
|
|
The
|
|
.Nx
|
|
distribution consists of a number of
|
|
.Em sets ,
|
|
that come in the form of gzipped tarfiles.
|
|
A few sets must be installed for a working system, others are optional.
|
|
At this point of the installation, you will be presented with a menu
|
|
which enables you to choose from one of the following methods
|
|
of installing the sets.
|
|
Some of these methods will first load the sets on your hard disk,
|
|
others will extract the sets directly.
|
|
.Pp
|
|
For all these methods, the first step is making the sets
|
|
available for extraction, and then do the actual installation.
|
|
The sets can be made available in a few different ways.
|
|
The following sections describe each of those methods.
|
|
After reading the one about the method you will be using, you
|
|
can continue to section labeled
|
|
.Sq Extracting the distribution sets .
|
|
.It
|
|
.To 2 "Installation using ftp"
|
|
.Em Installation using ftp
|
|
.Pp
|
|
To be able to install using ftp, you first need to configure
|
|
your network setup, if you haven't already at the start of
|
|
the install procedure.
|
|
.Ic sysinst
|
|
will do this for you, asking you
|
|
to provide some data, like IP address, hostname, etc.
|
|
If you do not have name service set up for the machine that you
|
|
are installing on, you can just press
|
|
.Key RETURN
|
|
in answer to these questions, and DNS will not be used.
|
|
.Pp
|
|
You will also be asked to specify the host that you want
|
|
to transfer the sets from, the directory on that host,
|
|
the account name and password used to log into that
|
|
host using ftp, and optionally a proxy server to use.
|
|
If you did not set up DNS when answering
|
|
the questions to configure networking, you will need to
|
|
specify an IP address instead of a hostname for the ftp
|
|
server.
|
|
.Pp
|
|
.Ic sysinst
|
|
will proceed to transfer all the default set files
|
|
from the remote site to your hard disk.
|
|
.It
|
|
.To 2 "Installation using NFS"
|
|
.Em Installation using NFS
|
|
.Pp
|
|
To be able to install using NFS, you first need to configure
|
|
your network setup, if you haven't already at the start of
|
|
the install procedure.
|
|
.Ic sysinst
|
|
will do this for you, asking you
|
|
to provide some data, like IP address, hostname, etc.
|
|
If you do not have name service set up for the machine that you
|
|
are installing on, you can just press
|
|
.Key RETURN
|
|
in answer to these questions, and DNS will not be used.
|
|
.Pp
|
|
You will also be asked to specify the host that you want
|
|
to transfer the sets from, and the directory on that host
|
|
that the files are in.
|
|
This directory should be mountable by the machine you are installing on,
|
|
i.e. correctly exported to your machine.
|
|
.Pp
|
|
If you did not set up DNS when answering the questions to
|
|
configure networking, you will need to specify an IP address
|
|
instead of a hostname for the NFS server.
|
|
.It
|
|
.To 2 "Installation from CD-ROM"
|
|
.Em Installation from CD-ROM
|
|
.Pp
|
|
When installing from a CD-ROM, you will be asked to specify
|
|
the device name for your CD-ROM player
|
|
.Pq usually Li cd0 ,
|
|
and the directory name on the CD-ROM where the distribution files are.
|
|
.Pp
|
|
.Ic sysinst
|
|
will then check if the files are indeed available
|
|
in the specified location, and proceed to the actual
|
|
extraction of the sets.
|
|
.if \n[i386] \{\
|
|
.It
|
|
.To 2 "Installation from a floppy set"
|
|
.Em Installation from a floppy set
|
|
.Pp
|
|
Because the installation sets are too big to fit on one floppy,
|
|
the floppies are expected to be filled with the split set
|
|
files.
|
|
The floppies are expected to be in
|
|
.Tn MS-DOS
|
|
format.
|
|
You will be asked for a directory where the sets should be reassembled.
|
|
Then you will be prompted to insert the floppies containing the split sets.
|
|
This process will continue until all the sets have been loaded from floppy.
|
|
.\}
|
|
.if \n[mac68k] \{\
|
|
.It
|
|
.To 2 "Installation from Mac OS file systems"
|
|
.Em Installation from Mac OS file systems
|
|
.Pp
|
|
.Nx*M
|
|
does not currently have in-kernel support for
|
|
.Tn Mac OS
|
|
HFS/HFS+ or AppleShare filesystems.
|
|
.Ic sysinst
|
|
therefore can not access the file sets if they are on these filesystems.
|
|
.\}
|
|
.It
|
|
.To 2 "Installation from an unmounted file system"
|
|
.Em Installation from an unmounted file system
|
|
.Pp
|
|
In order to install from a local file system, you will
|
|
need to specify the device that the file system resides
|
|
on
|
|
.ie \n[pmax] .Pq for example Li rz1e
|
|
.el .Pq for example Li sd1e
|
|
the type of the file system,
|
|
and the directory on the specified file system where the sets are located.
|
|
.Ic sysinst
|
|
will then check if it
|
|
can indeed access the sets at that location.
|
|
.if \n[sgimips] \{\
|
|
.Pp
|
|
If this is a CD-ROM installation, the device used will be the name for your
|
|
CD-ROM player with partition letter 'a'
|
|
.Pq usually cd0a .
|
|
.\}
|
|
.if \n[macppc] \{\
|
|
Remember,
|
|
.Nx*M
|
|
doesn't grok HFS or HFS+ partitions
|
|
.\}
|
|
.It
|
|
.To 2 "Installation from a local directory"
|
|
.Em Installation from a local directory
|
|
.Pp
|
|
This option assumes that you have already done some preparation
|
|
yourself.
|
|
The sets should be located in a directory on a
|
|
file system that is already accessible.
|
|
.Ic sysinst
|
|
will ask you
|
|
for the name of this directory.
|
|
.It
|
|
.To 2 "Extracting the distribution sets"
|
|
.Em Extracting the distribution sets
|
|
.Pp
|
|
After the install sets containing the
|
|
.Nx
|
|
distribution
|
|
have been made available, you can either extract all the
|
|
sets (a full installation), or only extract sets that
|
|
you have selected.
|
|
In the latter case, you will be shown the currently selected sets,
|
|
and given the opportunity to select the sets you want.
|
|
Some sets always need to be installed
|
|
.Pq Sy kern, base
|
|
and
|
|
.Sy etc
|
|
they will not be shown in this selection menu.
|
|
.Pp
|
|
Before extraction begins, you can elect to watch the files being
|
|
extracted; the name of each file that is extracted will be shown.
|
|
This can slow down the installation process considerably, especially
|
|
on machines with slow graphics consoles or serial consoles.
|
|
.Pp
|
|
.ie \n[macppc] \{\
|
|
If you are installing using the
|
|
.Me "Re-install sets or install additional sets"
|
|
option, then you will need to create the device nodes in
|
|
.Pa /dev ,
|
|
otherwise,
|
|
.\}
|
|
.el After all the files have been extracted,
|
|
all the necessary device node files will be created.
|
|
If you have already configured networking, you will be asked if you want to
|
|
use this configuration for normal operation.
|
|
If so, these values will be installed in the network configuration files.
|
|
The next menu will allow you to select the time zone that you're in,
|
|
to make sure your clock has the right offset from UTC.
|
|
Finally you will be asked to select a password encryption algorithm
|
|
and can than set a password for the "root" account, to prevent
|
|
the machine coming up without access restrictions.
|
|
.if \n[macppc] \{\
|
|
.It
|
|
.To 2 "Making the device nodes"
|
|
.Em Making the device nodes
|
|
.Pp
|
|
If you are installing using the
|
|
.Me "Re-install sets or install additional sets"
|
|
option, then you will need to create the device nodes in
|
|
.Pa /dev
|
|
now.
|
|
Otherwise, skip this step.
|
|
.Pp
|
|
Go to the main installation menu, and select
|
|
.Me "Utility menu"
|
|
and then select the
|
|
.Me "Run /bin/sh"
|
|
option, which will give you a shell prompt.
|
|
You may need to type one of the following commands to get your delete key
|
|
to work properly, depending on your keyboard:
|
|
.Dl # Ic "stty erase '^h'"
|
|
.Dl # Ic "stty erase '^?'"
|
|
.Pp
|
|
Type the following command (replacing
|
|
.Pa wd0a
|
|
with the partition name of your destination root partition):
|
|
Now you need to mount your destination root partition:
|
|
.Dl # Ic "mount /dev/wd0a /mnt"
|
|
.Dl # Ic "cd /mnt/dev"
|
|
.Dl # Ic "sh MAKEDEV all"
|
|
.Dl # Ic "cd /"
|
|
.Dl # Ic "umount /mnt"
|
|
.Dl # Ic "exit"
|
|
.\}
|
|
.It
|
|
.To 2 "Finalizing your installation"
|
|
.Em Finalizing your installation
|
|
.Pp
|
|
Congratulations, you have successfully installed
|
|
.Nx \*V .
|
|
.if \n[cats] \{\
|
|
.Pp
|
|
To finalize the installation of
|
|
.Nx*M
|
|
certain parameters on the Cyclone firmware need to changed.
|
|
The reason is that the Cyclone firmware is unable to boot anything other
|
|
than an a.out format kernels.
|
|
.Pp
|
|
Kernels created on a
|
|
.Nx*M
|
|
\*V system are natively ELF and converted to a.out.
|
|
This conversion process loses the symbol information used for,
|
|
amongst other things, kernel memory grovelers such as vmstat.
|
|
The workaround to the problem is to provide both the native ELF kernel
|
|
(with all the symbol information) and the a.out kernel.
|
|
These are available as /netbsd and /netbsd.aout respectively.
|
|
As the a.out format kernel is not named in such a way that the
|
|
Cyclone firmware will automatically find it the following command
|
|
should be issued as the firmware prompt.
|
|
.Pp
|
|
.Dl boot> Ic "set boot wd0:/netbsd.aout"
|
|
.Pp
|
|
.\}
|
|
.if !\n[macppc] \{\
|
|
You can now reboot the machine, and boot
|
|
.Nx
|
|
from hard disk.
|
|
.\} \" !\n[macppc]
|
|
.enum)
|