968 lines
21 KiB
C
968 lines
21 KiB
C
/* $NetBSD: uchcom.c,v 1.36 2020/03/14 02:35:33 christos Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 2007 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Takuya SHIOZAKI (tshiozak@netbsd.org).
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__KERNEL_RCSID(0, "$NetBSD: uchcom.c,v 1.36 2020/03/14 02:35:33 christos Exp $");
|
|
|
|
#ifdef _KERNEL_OPT
|
|
#include "opt_usb.h"
|
|
#endif
|
|
|
|
/*
|
|
* driver for WinChipHead CH341/340, the worst USB-serial chip in the world.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/kmem.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/tty.h>
|
|
#include <sys/file.h>
|
|
#include <sys/select.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/device.h>
|
|
#include <sys/poll.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
|
|
#include <dev/usb/usbdi.h>
|
|
#include <dev/usb/usbdi_util.h>
|
|
#include <dev/usb/usbdevs.h>
|
|
|
|
#include <dev/usb/ucomvar.h>
|
|
|
|
#ifdef UCHCOM_DEBUG
|
|
#define DPRINTFN(n, x) if (uchcomdebug > (n)) printf x
|
|
int uchcomdebug = 0;
|
|
#else
|
|
#define DPRINTFN(n, x)
|
|
#endif
|
|
#define DPRINTF(x) DPRINTFN(0, x)
|
|
|
|
#define UCHCOM_IFACE_INDEX 0
|
|
#define UCHCOM_CONFIG_INDEX 0
|
|
|
|
#define UCHCOM_INPUT_BUF_SIZE 8
|
|
|
|
#define UCHCOM_REQ_GET_VERSION 0x5F
|
|
#define UCHCOM_REQ_READ_REG 0x95
|
|
#define UCHCOM_REQ_WRITE_REG 0x9A
|
|
#define UCHCOM_REQ_RESET 0xA1
|
|
#define UCHCOM_REQ_SET_DTRRTS 0xA4
|
|
|
|
#define UCHCOM_REG_STAT1 0x06
|
|
#define UCHCOM_REG_STAT2 0x07
|
|
#define UCHCOM_REG_BPS_PRE 0x12
|
|
#define UCHCOM_REG_BPS_DIV 0x13
|
|
#define UCHCOM_REG_BREAK 0x05
|
|
#define UCHCOM_REG_LCR 0x18
|
|
#define UCHCOM_REG_LCR2 0x25
|
|
|
|
#define UCHCOM_VER_20 0x20
|
|
#define UCHCOM_VER_30 0x30
|
|
|
|
#define UCHCOM_BPS_PRE_IMM 0x80 /* CH341: immediate RX forwarding */
|
|
|
|
#define UCHCOM_DTR_MASK 0x20
|
|
#define UCHCOM_RTS_MASK 0x40
|
|
|
|
#define UCHCOM_BREAK_MASK 0x01
|
|
|
|
#define UCHCOM_LCR_CS5 0x00
|
|
#define UCHCOM_LCR_CS6 0x01
|
|
#define UCHCOM_LCR_CS7 0x02
|
|
#define UCHCOM_LCR_CS8 0x03
|
|
#define UCHCOM_LCR_STOPB 0x04
|
|
#define UCHCOM_LCR_PARENB 0x08
|
|
#define UCHCOM_LCR_PARODD 0x00
|
|
#define UCHCOM_LCR_PAREVEN 0x10
|
|
#define UCHCOM_LCR_PARMARK 0x20
|
|
#define UCHCOM_LCR_PARSPACE 0x30
|
|
#define UCHCOM_LCR_TXE 0x40
|
|
#define UCHCOM_LCR_RXE 0x80
|
|
|
|
#define UCHCOM_INTR_STAT1 0x02
|
|
#define UCHCOM_INTR_STAT2 0x03
|
|
#define UCHCOM_INTR_LEAST 4
|
|
|
|
#define UCHCOMIBUFSIZE 256
|
|
#define UCHCOMOBUFSIZE 256
|
|
|
|
#define UCHCOM_RESET_VALUE 0x501F
|
|
#define UCHCOM_RESET_INDEX 0xD90A
|
|
|
|
struct uchcom_softc
|
|
{
|
|
device_t sc_dev;
|
|
struct usbd_device * sc_udev;
|
|
device_t sc_subdev;
|
|
struct usbd_interface * sc_iface;
|
|
bool sc_dying;
|
|
/* */
|
|
int sc_intr_endpoint;
|
|
int sc_intr_size;
|
|
struct usbd_pipe * sc_intr_pipe;
|
|
u_char *sc_intr_buf;
|
|
/* */
|
|
uint8_t sc_version;
|
|
int sc_dtr;
|
|
int sc_rts;
|
|
u_char sc_lsr;
|
|
u_char sc_msr;
|
|
};
|
|
|
|
struct uchcom_endpoints
|
|
{
|
|
int ep_bulkin;
|
|
int ep_bulkout;
|
|
int ep_intr;
|
|
int ep_intr_size;
|
|
};
|
|
|
|
struct uchcom_divider
|
|
{
|
|
uint8_t dv_prescaler;
|
|
uint8_t dv_div;
|
|
};
|
|
|
|
static const uint32_t rates4x[8] = {
|
|
[0] = 4 * 12000000 / 1024,
|
|
[1] = 4 * 12000000 / 128,
|
|
[2] = 4 * 12000000 / 16,
|
|
[3] = 4 * 12000000 / 2,
|
|
[7] = 4 * 12000000,
|
|
};
|
|
|
|
static const struct usb_devno uchcom_devs[] = {
|
|
{ USB_VENDOR_QINHENG2, USB_PRODUCT_QINHENG2_CH341SER },
|
|
{ USB_VENDOR_QINHENG, USB_PRODUCT_QINHENG_CH340 },
|
|
{ USB_VENDOR_QINHENG, USB_PRODUCT_QINHENG_CH341_ASP },
|
|
};
|
|
#define uchcom_lookup(v, p) usb_lookup(uchcom_devs, v, p)
|
|
|
|
static void uchcom_get_status(void *, int, u_char *, u_char *);
|
|
static void uchcom_set(void *, int, int, int);
|
|
static int uchcom_param(void *, int, struct termios *);
|
|
static int uchcom_open(void *, int);
|
|
static void uchcom_close(void *, int);
|
|
static void uchcom_intr(struct usbd_xfer *, void *,
|
|
usbd_status);
|
|
|
|
static int set_config(struct uchcom_softc *);
|
|
static int find_ifaces(struct uchcom_softc *, struct usbd_interface **);
|
|
static int find_endpoints(struct uchcom_softc *,
|
|
struct uchcom_endpoints *);
|
|
static void close_intr_pipe(struct uchcom_softc *);
|
|
|
|
|
|
static const struct ucom_methods uchcom_methods = {
|
|
.ucom_get_status = uchcom_get_status,
|
|
.ucom_set = uchcom_set,
|
|
.ucom_param = uchcom_param,
|
|
.ucom_open = uchcom_open,
|
|
.ucom_close = uchcom_close,
|
|
};
|
|
|
|
static int uchcom_match(device_t, cfdata_t, void *);
|
|
static void uchcom_attach(device_t, device_t, void *);
|
|
static void uchcom_childdet(device_t, device_t);
|
|
static int uchcom_detach(device_t, int);
|
|
|
|
CFATTACH_DECL2_NEW(uchcom,
|
|
sizeof(struct uchcom_softc),
|
|
uchcom_match,
|
|
uchcom_attach,
|
|
uchcom_detach,
|
|
NULL,
|
|
NULL,
|
|
uchcom_childdet);
|
|
|
|
/* ----------------------------------------------------------------------
|
|
* driver entry points
|
|
*/
|
|
|
|
static int
|
|
uchcom_match(device_t parent, cfdata_t match, void *aux)
|
|
{
|
|
struct usb_attach_arg *uaa = aux;
|
|
|
|
return (uchcom_lookup(uaa->uaa_vendor, uaa->uaa_product) != NULL ?
|
|
UMATCH_VENDOR_PRODUCT : UMATCH_NONE);
|
|
}
|
|
|
|
static void
|
|
uchcom_attach(device_t parent, device_t self, void *aux)
|
|
{
|
|
struct uchcom_softc *sc = device_private(self);
|
|
struct usb_attach_arg *uaa = aux;
|
|
struct usbd_device *dev = uaa->uaa_device;
|
|
char *devinfop;
|
|
struct uchcom_endpoints endpoints;
|
|
struct ucom_attach_args ucaa;
|
|
|
|
aprint_naive("\n");
|
|
aprint_normal("\n");
|
|
|
|
devinfop = usbd_devinfo_alloc(dev, 0);
|
|
aprint_normal_dev(self, "%s\n", devinfop);
|
|
usbd_devinfo_free(devinfop);
|
|
|
|
sc->sc_dev = self;
|
|
sc->sc_udev = dev;
|
|
sc->sc_dying = false;
|
|
sc->sc_dtr = sc->sc_rts = -1;
|
|
sc->sc_lsr = sc->sc_msr = 0;
|
|
|
|
DPRINTF(("\n\nuchcom attach: sc=%p\n", sc));
|
|
|
|
if (set_config(sc))
|
|
goto failed;
|
|
|
|
if (find_ifaces(sc, &sc->sc_iface))
|
|
goto failed;
|
|
|
|
if (find_endpoints(sc, &endpoints))
|
|
goto failed;
|
|
|
|
sc->sc_intr_endpoint = endpoints.ep_intr;
|
|
sc->sc_intr_size = endpoints.ep_intr_size;
|
|
|
|
/* setup ucom layer */
|
|
ucaa.ucaa_portno = UCOM_UNK_PORTNO;
|
|
ucaa.ucaa_bulkin = endpoints.ep_bulkin;
|
|
ucaa.ucaa_bulkout = endpoints.ep_bulkout;
|
|
ucaa.ucaa_ibufsize = UCHCOMIBUFSIZE;
|
|
ucaa.ucaa_obufsize = UCHCOMOBUFSIZE;
|
|
ucaa.ucaa_ibufsizepad = UCHCOMIBUFSIZE;
|
|
ucaa.ucaa_opkthdrlen = 0;
|
|
ucaa.ucaa_device = dev;
|
|
ucaa.ucaa_iface = sc->sc_iface;
|
|
ucaa.ucaa_methods = &uchcom_methods;
|
|
ucaa.ucaa_arg = sc;
|
|
ucaa.ucaa_info = NULL;
|
|
|
|
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, sc->sc_dev);
|
|
|
|
sc->sc_subdev = config_found_sm_loc(self, "ucombus", NULL, &ucaa,
|
|
ucomprint, ucomsubmatch);
|
|
|
|
return;
|
|
|
|
failed:
|
|
sc->sc_dying = true;
|
|
return;
|
|
}
|
|
|
|
static void
|
|
uchcom_childdet(device_t self, device_t child)
|
|
{
|
|
struct uchcom_softc *sc = device_private(self);
|
|
|
|
KASSERT(sc->sc_subdev == child);
|
|
sc->sc_subdev = NULL;
|
|
}
|
|
|
|
static int
|
|
uchcom_detach(device_t self, int flags)
|
|
{
|
|
struct uchcom_softc *sc = device_private(self);
|
|
int rv = 0;
|
|
|
|
DPRINTF(("uchcom_detach: sc=%p flags=%d\n", sc, flags));
|
|
|
|
close_intr_pipe(sc);
|
|
|
|
sc->sc_dying = true;
|
|
|
|
if (sc->sc_subdev != NULL) {
|
|
rv = config_detach(sc->sc_subdev, flags);
|
|
sc->sc_subdev = NULL;
|
|
}
|
|
|
|
usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, sc->sc_dev);
|
|
|
|
return rv;
|
|
}
|
|
|
|
static int
|
|
set_config(struct uchcom_softc *sc)
|
|
{
|
|
usbd_status err;
|
|
|
|
err = usbd_set_config_index(sc->sc_udev, UCHCOM_CONFIG_INDEX, 1);
|
|
if (err) {
|
|
aprint_error_dev(sc->sc_dev,
|
|
"failed to set configuration: %s\n", usbd_errstr(err));
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
find_ifaces(struct uchcom_softc *sc, struct usbd_interface **riface)
|
|
{
|
|
usbd_status err;
|
|
|
|
err = usbd_device2interface_handle(sc->sc_udev, UCHCOM_IFACE_INDEX,
|
|
riface);
|
|
if (err) {
|
|
aprint_error("\n%s: failed to get interface: %s\n",
|
|
device_xname(sc->sc_dev), usbd_errstr(err));
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
find_endpoints(struct uchcom_softc *sc, struct uchcom_endpoints *endpoints)
|
|
{
|
|
int i, bin=-1, bout=-1, intr=-1, isize=0;
|
|
usb_interface_descriptor_t *id;
|
|
usb_endpoint_descriptor_t *ed;
|
|
|
|
id = usbd_get_interface_descriptor(sc->sc_iface);
|
|
|
|
for (i = 0; i < id->bNumEndpoints; i++) {
|
|
ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
|
|
if (ed == NULL) {
|
|
aprint_error_dev(sc->sc_dev,
|
|
"no endpoint descriptor for %d\n", i);
|
|
return -1;
|
|
}
|
|
|
|
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
|
|
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
|
|
intr = ed->bEndpointAddress;
|
|
isize = UGETW(ed->wMaxPacketSize);
|
|
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
|
|
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
|
|
bin = ed->bEndpointAddress;
|
|
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
|
|
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
|
|
bout = ed->bEndpointAddress;
|
|
}
|
|
}
|
|
|
|
if (intr == -1 || bin == -1 || bout == -1) {
|
|
if (intr == -1) {
|
|
aprint_error_dev(sc->sc_dev,
|
|
"no interrupt end point\n");
|
|
}
|
|
if (bin == -1) {
|
|
aprint_error_dev(sc->sc_dev,
|
|
"no data bulk in end point\n");
|
|
}
|
|
if (bout == -1) {
|
|
aprint_error_dev(sc->sc_dev,
|
|
"no data bulk out end point\n");
|
|
}
|
|
return -1;
|
|
}
|
|
if (isize < UCHCOM_INTR_LEAST) {
|
|
aprint_error_dev(sc->sc_dev, "intr pipe is too short\n");
|
|
return -1;
|
|
}
|
|
|
|
DPRINTF(("%s: bulkin=%d, bulkout=%d, intr=%d, isize=%d\n",
|
|
device_xname(sc->sc_dev), bin, bout, intr, isize));
|
|
|
|
endpoints->ep_intr = intr;
|
|
endpoints->ep_intr_size = isize;
|
|
endpoints->ep_bulkin = bin;
|
|
endpoints->ep_bulkout = bout;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* ----------------------------------------------------------------------
|
|
* low level i/o
|
|
*/
|
|
|
|
static __inline usbd_status
|
|
generic_control_out(struct uchcom_softc *sc, uint8_t reqno,
|
|
uint16_t value, uint16_t index)
|
|
{
|
|
usb_device_request_t req;
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = reqno;
|
|
USETW(req.wValue, value);
|
|
USETW(req.wIndex, index);
|
|
USETW(req.wLength, 0);
|
|
|
|
return usbd_do_request(sc->sc_udev, &req, 0);
|
|
}
|
|
|
|
static __inline usbd_status
|
|
generic_control_in(struct uchcom_softc *sc, uint8_t reqno,
|
|
uint16_t value, uint16_t index, void *buf, int buflen,
|
|
int *actlen)
|
|
{
|
|
usb_device_request_t req;
|
|
|
|
req.bmRequestType = UT_READ_VENDOR_DEVICE;
|
|
req.bRequest = reqno;
|
|
USETW(req.wValue, value);
|
|
USETW(req.wIndex, index);
|
|
USETW(req.wLength, (uint16_t)buflen);
|
|
|
|
return usbd_do_request_flags(sc->sc_udev, &req, buf,
|
|
USBD_SHORT_XFER_OK, actlen,
|
|
USBD_DEFAULT_TIMEOUT);
|
|
}
|
|
|
|
static __inline usbd_status
|
|
write_reg(struct uchcom_softc *sc,
|
|
uint8_t reg1, uint8_t val1, uint8_t reg2, uint8_t val2)
|
|
{
|
|
DPRINTF(("%s: write reg 0x%02X<-0x%02X, 0x%02X<-0x%02X\n",
|
|
device_xname(sc->sc_dev),
|
|
(unsigned)reg1, (unsigned)val1,
|
|
(unsigned)reg2, (unsigned)val2));
|
|
return generic_control_out(
|
|
sc, UCHCOM_REQ_WRITE_REG,
|
|
reg1|((uint16_t)reg2<<8), val1|((uint16_t)val2<<8));
|
|
}
|
|
|
|
static __inline usbd_status
|
|
read_reg(struct uchcom_softc *sc,
|
|
uint8_t reg1, uint8_t *rval1, uint8_t reg2, uint8_t *rval2)
|
|
{
|
|
uint8_t buf[UCHCOM_INPUT_BUF_SIZE];
|
|
usbd_status err;
|
|
int actin;
|
|
|
|
err = generic_control_in(
|
|
sc, UCHCOM_REQ_READ_REG,
|
|
reg1|((uint16_t)reg2<<8), 0, buf, sizeof(buf), &actin);
|
|
if (err)
|
|
return err;
|
|
|
|
DPRINTF(("%s: read reg 0x%02X->0x%02X, 0x%02X->0x%02X\n",
|
|
device_xname(sc->sc_dev),
|
|
(unsigned)reg1, (unsigned)buf[0],
|
|
(unsigned)reg2, (unsigned)buf[1]));
|
|
|
|
if (rval1) *rval1 = buf[0];
|
|
if (rval2) *rval2 = buf[1];
|
|
|
|
return USBD_NORMAL_COMPLETION;
|
|
}
|
|
|
|
static __inline usbd_status
|
|
get_version(struct uchcom_softc *sc, uint8_t *rver)
|
|
{
|
|
uint8_t buf[UCHCOM_INPUT_BUF_SIZE];
|
|
usbd_status err;
|
|
int actin;
|
|
|
|
err = generic_control_in(
|
|
sc, UCHCOM_REQ_GET_VERSION, 0, 0, buf, sizeof(buf), &actin);
|
|
if (err)
|
|
return err;
|
|
|
|
if (rver) *rver = buf[0];
|
|
|
|
return USBD_NORMAL_COMPLETION;
|
|
}
|
|
|
|
static __inline usbd_status
|
|
get_status(struct uchcom_softc *sc, uint8_t *rval)
|
|
{
|
|
return read_reg(sc, UCHCOM_REG_STAT1, rval, UCHCOM_REG_STAT2, NULL);
|
|
}
|
|
|
|
static __inline usbd_status
|
|
set_dtrrts_10(struct uchcom_softc *sc, uint8_t val)
|
|
{
|
|
return write_reg(sc, UCHCOM_REG_STAT1, val, UCHCOM_REG_STAT1, val);
|
|
}
|
|
|
|
static __inline usbd_status
|
|
set_dtrrts_20(struct uchcom_softc *sc, uint8_t val)
|
|
{
|
|
return generic_control_out(sc, UCHCOM_REQ_SET_DTRRTS, val, 0);
|
|
}
|
|
|
|
|
|
/* ----------------------------------------------------------------------
|
|
* middle layer
|
|
*/
|
|
|
|
static int
|
|
update_version(struct uchcom_softc *sc)
|
|
{
|
|
usbd_status err;
|
|
|
|
err = get_version(sc, &sc->sc_version);
|
|
if (err) {
|
|
device_printf(sc->sc_dev, "cannot get version: %s\n",
|
|
usbd_errstr(err));
|
|
return EIO;
|
|
}
|
|
DPRINTF(("%s: update_version %d\n", device_xname(sc->sc_dev), sc->sc_version));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
convert_status(struct uchcom_softc *sc, uint8_t cur)
|
|
{
|
|
sc->sc_dtr = !(cur & UCHCOM_DTR_MASK);
|
|
sc->sc_rts = !(cur & UCHCOM_RTS_MASK);
|
|
|
|
cur = ~cur & 0x0F;
|
|
sc->sc_msr = (cur << 4) | ((sc->sc_msr >> 4) ^ cur);
|
|
}
|
|
|
|
static int
|
|
update_status(struct uchcom_softc *sc)
|
|
{
|
|
usbd_status err;
|
|
uint8_t cur;
|
|
|
|
err = get_status(sc, &cur);
|
|
if (err) {
|
|
device_printf(sc->sc_dev,
|
|
"cannot update status: %s\n", usbd_errstr(err));
|
|
return EIO;
|
|
}
|
|
convert_status(sc, cur);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
set_dtrrts(struct uchcom_softc *sc, int dtr, int rts)
|
|
{
|
|
usbd_status err;
|
|
uint8_t val = 0;
|
|
|
|
if (dtr) val |= UCHCOM_DTR_MASK;
|
|
if (rts) val |= UCHCOM_RTS_MASK;
|
|
|
|
if (sc->sc_version < UCHCOM_VER_20)
|
|
err = set_dtrrts_10(sc, ~val);
|
|
else
|
|
err = set_dtrrts_20(sc, ~val);
|
|
|
|
if (err) {
|
|
device_printf(sc->sc_dev, "cannot set DTR/RTS: %s\n",
|
|
usbd_errstr(err));
|
|
return EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
set_break(struct uchcom_softc *sc, int onoff)
|
|
{
|
|
usbd_status err;
|
|
uint8_t brk, lcr;
|
|
|
|
err = read_reg(sc, UCHCOM_REG_BREAK, &brk, UCHCOM_REG_LCR, &lcr);
|
|
if (err)
|
|
return EIO;
|
|
if (onoff) {
|
|
/* on - clear bits */
|
|
brk &= ~UCHCOM_BREAK_MASK;
|
|
lcr &= ~UCHCOM_LCR_TXE;
|
|
} else {
|
|
/* off - set bits */
|
|
brk |= UCHCOM_BREAK_MASK;
|
|
lcr |= UCHCOM_LCR_TXE;
|
|
}
|
|
err = write_reg(sc, UCHCOM_REG_BREAK, brk, UCHCOM_REG_LCR, lcr);
|
|
if (err)
|
|
return EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
calc_divider_settings(struct uchcom_divider *dp, uint32_t rate)
|
|
{
|
|
size_t i;
|
|
uint32_t best, div, pre;
|
|
const uint32_t rate4x = rate * 4U;
|
|
|
|
if (rate == 0 || rate > 3000000)
|
|
return -1;
|
|
|
|
pre = __arraycount(rates4x);
|
|
best = UINT32_MAX;
|
|
|
|
for (i = 0; i < __arraycount(rates4x); i++) {
|
|
uint32_t score, try;
|
|
try = rates4x[i] * 2 / rate4x;
|
|
try = (try / 2) + (try & 1);
|
|
if (try < 2)
|
|
continue;
|
|
if (try > 255)
|
|
try = 255;
|
|
score = abs((int)rate4x - rates4x[i] / try);
|
|
if (score < best) {
|
|
best = score;
|
|
pre = i;
|
|
div = try;
|
|
}
|
|
}
|
|
|
|
if (pre >= __arraycount(rates4x))
|
|
return -1;
|
|
if ((rates4x[pre] / div / 4) < (rate * 99 / 100))
|
|
return -1;
|
|
if ((rates4x[pre] / div / 4) > (rate * 101 / 100))
|
|
return -1;
|
|
|
|
dp->dv_prescaler = pre;
|
|
dp->dv_div = (uint8_t)-div;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
set_dte_rate(struct uchcom_softc *sc, uint32_t rate)
|
|
{
|
|
usbd_status err;
|
|
struct uchcom_divider dv;
|
|
|
|
if (calc_divider_settings(&dv, rate))
|
|
return EINVAL;
|
|
|
|
if ((err = write_reg(sc,
|
|
UCHCOM_REG_BPS_PRE,
|
|
dv.dv_prescaler | UCHCOM_BPS_PRE_IMM,
|
|
UCHCOM_REG_BPS_DIV, dv.dv_div))) {
|
|
device_printf(sc->sc_dev, "cannot set DTE rate: %s\n",
|
|
usbd_errstr(err));
|
|
return EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
set_line_control(struct uchcom_softc *sc, tcflag_t cflag)
|
|
{
|
|
usbd_status err;
|
|
uint8_t lcr = 0, lcr2 = 0;
|
|
|
|
err = read_reg(sc, UCHCOM_REG_LCR, &lcr, UCHCOM_REG_LCR2, &lcr2);
|
|
if (err) {
|
|
device_printf(sc->sc_dev, "cannot get LCR: %s\n",
|
|
usbd_errstr(err));
|
|
return EIO;
|
|
}
|
|
|
|
lcr = UCHCOM_LCR_RXE | UCHCOM_LCR_TXE;
|
|
|
|
switch (ISSET(cflag, CSIZE)) {
|
|
case CS5:
|
|
lcr |= UCHCOM_LCR_CS5;
|
|
break;
|
|
case CS6:
|
|
lcr |= UCHCOM_LCR_CS6;
|
|
break;
|
|
case CS7:
|
|
lcr |= UCHCOM_LCR_CS7;
|
|
break;
|
|
case CS8:
|
|
lcr |= UCHCOM_LCR_CS8;
|
|
break;
|
|
}
|
|
|
|
if (ISSET(cflag, PARENB)) {
|
|
lcr |= UCHCOM_LCR_PARENB;
|
|
if (!ISSET(cflag, PARODD))
|
|
lcr |= UCHCOM_LCR_PAREVEN;
|
|
}
|
|
|
|
if (ISSET(cflag, CSTOPB)) {
|
|
lcr |= UCHCOM_LCR_STOPB;
|
|
}
|
|
|
|
err = write_reg(sc, UCHCOM_REG_LCR, lcr, UCHCOM_REG_LCR2, lcr2);
|
|
if (err) {
|
|
device_printf(sc->sc_dev, "cannot set LCR: %s\n",
|
|
usbd_errstr(err));
|
|
return EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
clear_chip(struct uchcom_softc *sc)
|
|
{
|
|
usbd_status err;
|
|
|
|
DPRINTF(("%s: clear\n", device_xname(sc->sc_dev)));
|
|
err = generic_control_out(sc, UCHCOM_REQ_RESET, 0, 0);
|
|
if (err) {
|
|
device_printf(sc->sc_dev, "cannot clear: %s\n",
|
|
usbd_errstr(err));
|
|
return EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
reset_chip(struct uchcom_softc *sc)
|
|
{
|
|
usbd_status err;
|
|
|
|
err = generic_control_out(sc, UCHCOM_REQ_RESET,
|
|
UCHCOM_RESET_VALUE, UCHCOM_RESET_INDEX);
|
|
if (err)
|
|
goto failed;
|
|
|
|
return 0;
|
|
|
|
failed:
|
|
printf("%s: cannot reset: %s\n",
|
|
device_xname(sc->sc_dev), usbd_errstr(err));
|
|
return EIO;
|
|
}
|
|
|
|
static int
|
|
setup_comm(struct uchcom_softc *sc)
|
|
{
|
|
int ret;
|
|
|
|
ret = update_version(sc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clear_chip(sc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = set_dte_rate(sc, TTYDEF_SPEED);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = set_line_control(sc, CS8);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = update_status(sc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = reset_chip(sc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = set_dte_rate(sc, TTYDEF_SPEED); /* XXX */
|
|
if (ret)
|
|
return ret;
|
|
|
|
sc->sc_dtr = sc->sc_rts = 1;
|
|
ret = set_dtrrts(sc, sc->sc_dtr, sc->sc_rts);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
setup_intr_pipe(struct uchcom_softc *sc)
|
|
{
|
|
usbd_status err;
|
|
|
|
if (sc->sc_intr_endpoint != -1 && sc->sc_intr_pipe == NULL) {
|
|
sc->sc_intr_buf = kmem_alloc(sc->sc_intr_size, KM_SLEEP);
|
|
err = usbd_open_pipe_intr(sc->sc_iface,
|
|
sc->sc_intr_endpoint,
|
|
USBD_SHORT_XFER_OK,
|
|
&sc->sc_intr_pipe, sc,
|
|
sc->sc_intr_buf,
|
|
sc->sc_intr_size,
|
|
uchcom_intr, USBD_DEFAULT_INTERVAL);
|
|
if (err) {
|
|
device_printf(sc->sc_dev,
|
|
"cannot open interrupt pipe: %s\n",
|
|
usbd_errstr(err));
|
|
return EIO;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
close_intr_pipe(struct uchcom_softc *sc)
|
|
{
|
|
|
|
if (sc->sc_intr_pipe != NULL) {
|
|
usbd_abort_pipe(sc->sc_intr_pipe);
|
|
usbd_close_pipe(sc->sc_intr_pipe);
|
|
sc->sc_intr_pipe = NULL;
|
|
}
|
|
if (sc->sc_intr_buf != NULL) {
|
|
kmem_free(sc->sc_intr_buf, sc->sc_intr_size);
|
|
sc->sc_intr_buf = NULL;
|
|
}
|
|
}
|
|
|
|
|
|
/* ----------------------------------------------------------------------
|
|
* methods for ucom
|
|
*/
|
|
static void
|
|
uchcom_get_status(void *arg, int portno, u_char *rlsr, u_char *rmsr)
|
|
{
|
|
struct uchcom_softc *sc = arg;
|
|
|
|
if (sc->sc_dying)
|
|
return;
|
|
|
|
*rlsr = sc->sc_lsr;
|
|
*rmsr = sc->sc_msr;
|
|
}
|
|
|
|
static void
|
|
uchcom_set(void *arg, int portno, int reg, int onoff)
|
|
{
|
|
struct uchcom_softc *sc = arg;
|
|
|
|
if (sc->sc_dying)
|
|
return;
|
|
|
|
switch (reg) {
|
|
case UCOM_SET_DTR:
|
|
sc->sc_dtr = !!onoff;
|
|
set_dtrrts(sc, sc->sc_dtr, sc->sc_rts);
|
|
break;
|
|
case UCOM_SET_RTS:
|
|
sc->sc_rts = !!onoff;
|
|
set_dtrrts(sc, sc->sc_dtr, sc->sc_rts);
|
|
break;
|
|
case UCOM_SET_BREAK:
|
|
set_break(sc, onoff);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int
|
|
uchcom_param(void *arg, int portno, struct termios *t)
|
|
{
|
|
struct uchcom_softc *sc = arg;
|
|
int ret;
|
|
|
|
if (sc->sc_dying)
|
|
return EIO;
|
|
|
|
ret = set_line_control(sc, t->c_cflag);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = set_dte_rate(sc, t->c_ospeed);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
uchcom_open(void *arg, int portno)
|
|
{
|
|
int ret;
|
|
struct uchcom_softc *sc = arg;
|
|
|
|
if (sc->sc_dying)
|
|
return EIO;
|
|
|
|
ret = setup_intr_pipe(sc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = setup_comm(sc);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
uchcom_close(void *arg, int portno)
|
|
{
|
|
struct uchcom_softc *sc = arg;
|
|
|
|
if (sc->sc_dying)
|
|
return;
|
|
|
|
close_intr_pipe(sc);
|
|
}
|
|
|
|
|
|
/* ----------------------------------------------------------------------
|
|
* callback when the modem status is changed.
|
|
*/
|
|
static void
|
|
uchcom_intr(struct usbd_xfer *xfer, void * priv,
|
|
usbd_status status)
|
|
{
|
|
struct uchcom_softc *sc = priv;
|
|
u_char *buf = sc->sc_intr_buf;
|
|
|
|
if (sc->sc_dying)
|
|
return;
|
|
|
|
if (status != USBD_NORMAL_COMPLETION) {
|
|
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
|
|
return;
|
|
|
|
DPRINTF(("%s: abnormal status: %s\n",
|
|
device_xname(sc->sc_dev), usbd_errstr(status)));
|
|
usbd_clear_endpoint_stall_async(sc->sc_intr_pipe);
|
|
return;
|
|
}
|
|
DPRINTF(("%s: intr: 0x%02X 0x%02X 0x%02X 0x%02X "
|
|
"0x%02X 0x%02X 0x%02X 0x%02X\n",
|
|
device_xname(sc->sc_dev),
|
|
(unsigned)buf[0], (unsigned)buf[1],
|
|
(unsigned)buf[2], (unsigned)buf[3],
|
|
(unsigned)buf[4], (unsigned)buf[5],
|
|
(unsigned)buf[6], (unsigned)buf[7]));
|
|
|
|
convert_status(sc, buf[UCHCOM_INTR_STAT1]);
|
|
ucom_status_change(device_private(sc->sc_subdev));
|
|
}
|