106 lines
3.4 KiB
Groff
106 lines
3.4 KiB
Groff
.\" $NetBSD: awi.4,v 1.1 1999/11/04 19:36:01 sommerfeld Exp $
|
|
.\"
|
|
.\"
|
|
.\" $Id: awi.4,v 1.1 1999/11/04 19:36:01 sommerfeld Exp $
|
|
.\"
|
|
.Dd October 31, 1999
|
|
.Dt AWI 4
|
|
.Os
|
|
.Sh NAME
|
|
.Nm awi
|
|
.Nd
|
|
Bay Networks BayStack 650 IEEE 802.11 PCMCIA driver
|
|
.Sh SYNOPSIS
|
|
.Cd "awi* at pcmcia? function ?"
|
|
.Sh DESCRIPTION
|
|
The
|
|
.Nm
|
|
driver provides support for BayStack 650 IEEE 802.11 Frequency Hopping
|
|
PCCARD adapters.
|
|
.Pp
|
|
The BayStack 650 is based on an AMD 79c930 controller, which provides
|
|
access to 32kb of memory shared between the controller and the host.
|
|
All host/device interaction is via this shared memory, which can be
|
|
accessed either via PCMCIA memory space or I/O space.
|
|
The
|
|
.Nm
|
|
driver encapsulates all IP and ARP traffic as 802.11 frames. Transmit
|
|
speed is fixed at 1Mbps.
|
|
.Pp
|
|
The driver currently only works in infrastructure mode, communicating
|
|
with an Access Point which serves as a link-layer bridge between an
|
|
ethernet and the wireless network.
|
|
.Pp
|
|
This card seems to take between 5 and 20 seconds after it has been brought up
|
|
to synchronize with an AP. When using
|
|
.Xr dhclient 8
|
|
to automatically configure an address on this card, it may be
|
|
advisable to delay the invocation of dhclient for about 10 seconds
|
|
after the card is brought up using
|
|
.Xr ifconfig 8
|
|
.Pp
|
|
For more information on configuring this device, see
|
|
.Xr ifconfig 8
|
|
.Sh DIAGNOSTICS
|
|
.Bl -diag
|
|
.It "awi0: unable to allocate memory space; using i/o only"
|
|
Indicates that the driver was not able to allocate 32kb of PCMCIA bus
|
|
address space into which to map the device; the driver will use the
|
|
(slightly slower) i/o-space only access methods to read and write to
|
|
the shared memory. Since by default, NetBSD, only allocates 16kb of
|
|
address space per PCMCIA controller, this message is in some sense to
|
|
be expected and should not be a cause for alarm.
|
|
See
|
|
.Xr pcmcia 4
|
|
for information on how to increase the memory available to the PCMCIA
|
|
controller.
|
|
.It "awi0: selftest failed (code %x)"
|
|
The device failed to pass its internal selftest.
|
|
.It "awi0: device failed to complete selftest (code %x)"
|
|
The device failed to complete its self test within 5 seconds.
|
|
.It "awi0: device timeout"
|
|
.It "awi0: timeout waiting for command completion"
|
|
The device failed to generate an interrupt to acknowledge a command.
|
|
.It "awi0: transmit timeout"
|
|
The device failed to generate an interrupt to acknowledge a
|
|
transmitted packet.
|
|
.It "awi0: large frame truncated"
|
|
The system handed the driver a packet which was too large to transmit
|
|
in one piece.
|
|
.It "awi0: device enable failed"
|
|
The system was unable to power on the card.
|
|
.It "awi0: associated with %s, SSID: %s
|
|
The device has successfully synchronized with the identified Access
|
|
Point and is ready to relay traffic.
|
|
.It "awi0: no recent beacon from %s; rescanning"
|
|
The device has not heard a beacon from its currently associated Access
|
|
Point recently, and is looking for a new access point.
|
|
.It "awi0: received deauth"
|
|
The access point the card was most recently associated with has
|
|
forgotten about us.
|
|
.El
|
|
.Sh BUGS
|
|
Doesn't support ad-hoc mode or WEP.
|
|
Round trip times seem higher than what one might expect.
|
|
.Sh SEE ALSO
|
|
.Xr arp 4 ,
|
|
.Xr netintro 4 ,
|
|
.Xr pcmcia 4 ,
|
|
.Xr wi 4 ,
|
|
.Xr ifconfig 8 ,
|
|
.Xr wiconfig 8
|
|
.Rs
|
|
.%T Am79C930 PCnet Mobile Single-Chip Wireless LAN Media Access Controller
|
|
.%O http://www.amd.com
|
|
.Re
|
|
.Sh HISTORY
|
|
The
|
|
.Nm
|
|
device driver first appeared in
|
|
.Nx 1.5 .
|
|
.Sh AUTHOR
|
|
The
|
|
.Nm
|
|
driver was written by
|
|
.An Bill Sommerfeld Aq sommerfeld@netbsd.org .
|