Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
09b2af815f
NetBSD/sys/dev/pci/trm.c
uebayasi 8184d5dc03 Don't pull in the whole uvm(9) API to access only PAGE_SIZE and 
some other constants.  These are provided by sys/param.h now.
2010-11-13 13:51:57 +00:00

2664 lines
68 KiB
C
Raw Blame History

/* $NetBSD: trm.c,v 1.32 2010/11/13 13:52:08 uebayasi Exp $ */
/*-
* Copyright (c) 2002 Izumi Tsutsui. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Device Driver for Tekram DC395U/UW/F, DC315/U
* PCI SCSI Bus Master Host Adapter
* (SCSI chip set used Tekram ASIC TRM-S1040)
*
* Copyright (c) 2001 Rui-Xiang Guo
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Ported from
* dc395x_trm.c
*
* Written for NetBSD 1.4.x by
* Erich Chen (erich@tekram.com.tw)
*
* Provided by
* (C)Copyright 1995-1999 Tekram Technology Co., Ltd. All rights reserved.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: trm.c,v 1.32 2010/11/13 13:52:08 uebayasi Exp $");
/* #define TRM_DEBUG */
#ifdef TRM_DEBUG
int trm_debug = 1;
#define DPRINTF(arg) if (trm_debug > 0) printf arg;
#else
#define DPRINTF(arg)
#endif
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/buf.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/queue.h>
#include <sys/bus.h>
#include <sys/intr.h>
#include <dev/scsipi/scsi_spc.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsi_message.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <dev/pci/pcidevs.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/trmreg.h>
/*
* feature of chip set MAX value
*/
#define TRM_MAX_TARGETS 16
#define TRM_MAX_LUNS 8
#define TRM_MAX_SG_ENTRIES (MAXPHYS / PAGE_SIZE + 1)
#define TRM_MAX_SRB 32 /* XXX */
#define TRM_MAX_TAG TRM_MAX_SRB /* XXX */
#define TRM_MAX_OFFSET 15
#define TRM_MAX_PERIOD 125
/*
* Segment Entry
*/
struct trm_sg_entry {
uint32_t address;
uint32_t length;
};
#define TRM_SG_SIZE (sizeof(struct trm_sg_entry) * TRM_MAX_SG_ENTRIES)
/*
**********************************************************************
* The SEEPROM structure for TRM_S1040
**********************************************************************
*/
struct nvram_target {
uint8_t config0; /* Target configuration byte 0 */
#define NTC_DO_WIDE_NEGO 0x20 /* Wide negotiate */
#define NTC_DO_TAG_QUEUING 0x10 /* Enable SCSI tagged queuing */
#define NTC_DO_SEND_START 0x08 /* Send start command SPINUP */
#define NTC_DO_DISCONNECT 0x04 /* Enable SCSI disconnect */
#define NTC_DO_SYNC_NEGO 0x02 /* Sync negotiation */
#define NTC_DO_PARITY_CHK 0x01 /* Parity check enable */
uint8_t period; /* Target period */
uint8_t config2; /* Target configuration byte 2 */
uint8_t config3; /* Target configuration byte 3 */
};
struct trm_nvram {
uint8_t subvendor_id[2]; /* 0,1 Sub Vendor ID */
uint8_t subsys_id[2]; /* 2,3 Sub System ID */
uint8_t subclass; /* 4 Sub Class */
uint8_t vendor_id[2]; /* 5,6 Vendor ID */
uint8_t device_id[2]; /* 7,8 Device ID */
uint8_t reserved0; /* 9 Reserved */
struct nvram_target target[TRM_MAX_TARGETS];
/* 10,11,12,13
* 14,15,16,17
* ....
* 70,71,72,73 */
uint8_t scsi_id; /* 74 Host Adapter SCSI ID */
uint8_t channel_cfg; /* 75 Channel configuration */
#define NAC_SCANLUN 0x20 /* Include LUN as BIOS device */
#define NAC_DO_PARITY_CHK 0x08 /* Parity check enable */
#define NAC_POWERON_SCSI_RESET 0x04 /* Power on reset enable */
#define NAC_GREATER_1G 0x02 /* > 1G support enable */
#define NAC_GT2DRIVES 0x01 /* Support more than 2 drives */
uint8_t delay_time; /* 76 Power on delay time */
uint8_t max_tag; /* 77 Maximum tags */
uint8_t reserved1; /* 78 */
uint8_t boot_target; /* 79 */
uint8_t boot_lun; /* 80 */
uint8_t reserved2; /* 81 */
uint8_t reserved3[44]; /* 82,..125 */
uint8_t checksum0; /* 126 */
uint8_t checksum1; /* 127 */
#define TRM_NVRAM_CKSUM 0x1234
};
/* Nvram Initiater bits definition */
#define MORE2_DRV 0x00000001
#define GREATER_1G 0x00000002
#define RST_SCSI_BUS 0x00000004
#define ACTIVE_NEGATION 0x00000008
#define NO_SEEK 0x00000010
#define LUN_CHECK 0x00000020
#define trm_eeprom_wait() DELAY(30)
/*
*-----------------------------------------------------------------------
* SCSI Request Block
*-----------------------------------------------------------------------
*/
struct trm_srb {
TAILQ_ENTRY(trm_srb) next;
struct trm_sg_entry *sgentry;
struct scsipi_xfer *xs; /* scsipi_xfer for this cmd */
bus_dmamap_t dmap;
bus_size_t sgoffset; /* Xfer buf offset */
uint32_t buflen; /* Total xfer length */
uint32_t sgaddr; /* SGList physical starting address */
int sgcnt;
int sgindex;
int hastat; /* Host Adapter Status */
#define H_STATUS_GOOD 0x00
#define H_SEL_TIMEOUT 0x11
#define H_OVER_UNDER_RUN 0x12
#define H_UNEXP_BUS_FREE 0x13
#define H_TARGET_PHASE_F 0x14
#define H_INVALID_CCB_OP 0x16
#define H_LINK_CCB_BAD 0x17
#define H_BAD_TARGET_DIR 0x18
#define H_DUPLICATE_CCB 0x19
#define H_BAD_CCB_OR_SG 0x1A
#define H_ABORT 0xFF
int tastat; /* Target SCSI Status Byte */
int flag; /* SRBFlag */
#define AUTO_REQSENSE 0x0001
#define PARITY_ERROR 0x0002
#define SRB_TIMEOUT 0x0004
int cmdlen; /* SCSI command length */
uint8_t cmd[12]; /* SCSI command */
uint8_t tag[2];
};
/*
* some info about each target and lun on the SCSI bus
*/
struct trm_linfo {
int used; /* number of slots in use */
int avail; /* where to start scanning */
int busy; /* lun in use */
struct trm_srb *untagged;
struct trm_srb *queued[TRM_MAX_TAG];
};
struct trm_tinfo {
u_int flag; /* Sync mode ? (1 sync):(0 async) */
#define SYNC_NEGO_ENABLE 0x0001
#define SYNC_NEGO_DOING 0x0002
#define SYNC_NEGO_DONE 0x0004
#define WIDE_NEGO_ENABLE 0x0008
#define WIDE_NEGO_DOING 0x0010
#define WIDE_NEGO_DONE 0x0020
#define USE_TAG_QUEUING 0x0040
#define NO_RESELECT 0x0080
struct trm_linfo *linfo[TRM_MAX_LUNS];
uint8_t config0; /* Target Config */
uint8_t period; /* Max Period for nego. */
uint8_t synctl; /* Sync control for reg. */
uint8_t offset; /* Sync offset for reg. and nego.(low nibble) */
};
/*
*-----------------------------------------------------------------------
* Adapter Control Block
*-----------------------------------------------------------------------
*/
struct trm_softc {
device_t sc_dev;
bus_space_tag_t sc_iot;
bus_space_handle_t sc_ioh;
bus_dma_tag_t sc_dmat;
bus_dmamap_t sc_dmamap; /* Map the control structures */
struct trm_srb *sc_actsrb;
struct trm_tinfo sc_tinfo[TRM_MAX_TARGETS];
TAILQ_HEAD(, trm_srb) sc_freesrb,
sc_readysrb;
struct trm_srb *sc_srb; /* SRB array */
struct trm_sg_entry *sc_sglist;
int sc_maxid;
/*
* Link to the generic SCSI driver
*/
struct scsipi_channel sc_channel;
struct scsipi_adapter sc_adapter;
int sc_id; /* Adapter SCSI Target ID */
int sc_state; /* SRB State */
#define TRM_IDLE 0
#define TRM_WAIT 1
#define TRM_READY 2
#define TRM_MSGOUT 3 /* arbitration+msg_out 1st byte */
#define TRM_MSGIN 4
#define TRM_EXTEND_MSGIN 5
#define TRM_COMMAND 6
#define TRM_START 7 /* arbitration+msg_out+command_out */
#define TRM_DISCONNECTED 8
#define TRM_DATA_XFER 9
#define TRM_XFERPAD 10
#define TRM_STATUS 11
#define TRM_COMPLETED 12
#define TRM_ABORT_SENT 13
#define TRM_UNEXPECT_RESEL 14
int sc_phase; /* SCSI phase */
int sc_config;
#define HCC_WIDE_CARD 0x01
#define HCC_SCSI_RESET 0x02
#define HCC_PARITY 0x04
#define HCC_AUTOTERM 0x08
#define HCC_LOW8TERM 0x10
#define HCC_UP8TERM 0x20
int sc_flag;
#define RESET_DEV 0x01
#define RESET_DETECT 0x02
#define RESET_DONE 0x04
#define WAIT_TAGMSG 0x08 /* XXX */
int sc_msgcnt;
int resel_target; /* XXX */
int resel_lun; /* XXX */
uint8_t *sc_msg;
uint8_t sc_msgbuf[6];
};
/*
* SCSI Status codes not defined in scsi_all.h
*/
#define SCSI_COND_MET 0x04 /* Condition Met */
#define SCSI_INTERM_COND_MET 0x14 /* Intermediate condition met */
#define SCSI_UNEXP_BUS_FREE 0xFD /* Unexpected Bus Free */
#define SCSI_BUS_RST_DETECT 0xFE /* SCSI Bus Reset detected */
#define SCSI_SEL_TIMEOUT 0xFF /* Selection Timeout */
static int trm_match(device_t, cfdata_t, void *);
static void trm_attach(device_t, device_t, void *);
static int trm_init(struct trm_softc *);
static void trm_scsipi_request(struct scsipi_channel *, scsipi_adapter_req_t,
void *);
static void trm_update_xfer_mode(struct trm_softc *, int);
static void trm_sched(struct trm_softc *);
static int trm_select(struct trm_softc *, struct trm_srb *);
static void trm_reset(struct trm_softc *);
static void trm_timeout(void *);
static int trm_intr(void *);
static void trm_dataout_phase0(struct trm_softc *, int);
static void trm_datain_phase0(struct trm_softc *, int);
static void trm_status_phase0(struct trm_softc *);
static void trm_msgin_phase0(struct trm_softc *);
static void trm_command_phase1(struct trm_softc *);
static void trm_status_phase1(struct trm_softc *);
static void trm_msgout_phase1(struct trm_softc *);
static void trm_msgin_phase1(struct trm_softc *);
static void trm_dataio_xfer(struct trm_softc *, int);
static void trm_disconnect(struct trm_softc *);
static void trm_reselect(struct trm_softc *);
static void trm_done(struct trm_softc *, struct trm_srb *);
static int trm_request_sense(struct trm_softc *, struct trm_srb *);
static void trm_dequeue(struct trm_softc *, struct trm_srb *);
static void trm_scsi_reset_detect(struct trm_softc *);
static void trm_reset_scsi_bus(struct trm_softc *);
static void trm_check_eeprom(struct trm_softc *, struct trm_nvram *);
static void trm_eeprom_read_all(struct trm_softc *, struct trm_nvram *);
static void trm_eeprom_write_all(struct trm_softc *, struct trm_nvram *);
static void trm_eeprom_set_data(struct trm_softc *, uint8_t, uint8_t);
static void trm_eeprom_write_cmd(struct trm_softc *, uint8_t, uint8_t);
static uint8_t trm_eeprom_get_data(struct trm_softc *, uint8_t);
CFATTACH_DECL_NEW(trm, sizeof(struct trm_softc),
trm_match, trm_attach, NULL, NULL);
/* real period: */
static const uint8_t trm_clock_period[] = {
12, /* 48 ns 20.0 MB/sec */
18, /* 72 ns 13.3 MB/sec */
25, /* 100 ns 10.0 MB/sec */
31, /* 124 ns 8.0 MB/sec */
37, /* 148 ns 6.6 MB/sec */
43, /* 172 ns 5.7 MB/sec */
50, /* 200 ns 5.0 MB/sec */
62 /* 248 ns 4.0 MB/sec */
};
#define NPERIOD __arraycount(trm_clock_period)
static int
trm_match(device_t parent, cfdata_t cf, void *aux)
{
struct pci_attach_args *pa = aux;
if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_TEKRAM2)
switch (PCI_PRODUCT(pa->pa_id)) {
case PCI_PRODUCT_TEKRAM2_DC315:
return 1;
}
return 0;
}
/*
* attach and init a host adapter
*/
static void
trm_attach(device_t parent, device_t self, void *aux)
{
struct trm_softc *sc = device_private(self);
struct pci_attach_args *const pa = aux;
bus_space_tag_t iot;
bus_space_handle_t ioh;
pci_intr_handle_t ih;
pcireg_t command;
const char *intrstr;
sc->sc_dev = self;
/*
* These cards do not allow memory mapped accesses
* pa_pc: chipset tag
* pa_tag: pci tag
*/
command = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
if ((command & (PCI_COMMAND_IO_ENABLE | PCI_COMMAND_MASTER_ENABLE)) !=
(PCI_COMMAND_IO_ENABLE | PCI_COMMAND_MASTER_ENABLE)) {
command |= PCI_COMMAND_IO_ENABLE | PCI_COMMAND_MASTER_ENABLE;
pci_conf_write(pa->pa_pc, pa->pa_tag,
PCI_COMMAND_STATUS_REG, command);
}
/*
* mask for get correct base address of pci IO port
*/
if (pci_mapreg_map(pa, PCI_MAPREG_START, PCI_MAPREG_TYPE_IO, 0,
&iot, &ioh, NULL, NULL)) {
aprint_error(": unable to map registers\n");
return;
}
/*
* test checksum of eeprom.. & initialize softc...
*/
sc->sc_iot = iot;
sc->sc_ioh = ioh;
sc->sc_dmat = pa->pa_dmat;
if (trm_init(sc) != 0) {
/*
* Error during initialization!
*/
return;
}
/*
* Now try to attach all the sub-devices
*/
if ((sc->sc_config & HCC_WIDE_CARD) != 0)
aprint_normal(": Tekram DC395UW/F (TRM-S1040) Fast40 "
"Ultra Wide SCSI Adapter\n");
else
aprint_normal(": Tekram DC395U, DC315/U (TRM-S1040) Fast20 "
"Ultra SCSI Adapter\n");
/*
* Now tell the generic SCSI layer about our bus.
* map and establish interrupt
*/
if (pci_intr_map(pa, &ih)) {
aprint_error_dev(self, "couldn't map interrupt\n");
return;
}
intrstr = pci_intr_string(pa->pa_pc, ih);
if (pci_intr_establish(pa->pa_pc, ih, IPL_BIO, trm_intr, sc) == NULL) {
aprint_error_dev(self, "couldn't establish interrupt");
if (intrstr != NULL)
aprint_error(" at %s", intrstr);
aprint_error("\n");
return;
}
if (intrstr != NULL)
aprint_normal_dev(self, "interrupting at %s\n", intrstr);
sc->sc_adapter.adapt_dev = self;
sc->sc_adapter.adapt_nchannels = 1;
sc->sc_adapter.adapt_openings = TRM_MAX_SRB;
sc->sc_adapter.adapt_max_periph = TRM_MAX_SRB;
sc->sc_adapter.adapt_request = trm_scsipi_request;
sc->sc_adapter.adapt_minphys = minphys;
sc->sc_channel.chan_adapter = &sc->sc_adapter;
sc->sc_channel.chan_bustype = &scsi_bustype;
sc->sc_channel.chan_channel = 0;
sc->sc_channel.chan_ntargets = sc->sc_maxid + 1;
sc->sc_channel.chan_nluns = 8;
sc->sc_channel.chan_id = sc->sc_id;
config_found(self, &sc->sc_channel, scsiprint);
}
/*
* initialize the internal structures for a given SCSI host
*/
static int
trm_init(struct trm_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
bus_dma_segment_t seg;
struct trm_nvram eeprom;
struct trm_srb *srb;
struct trm_tinfo *ti;
struct nvram_target *tconf;
int error, rseg, all_sgsize;
int i, target;
uint8_t bval;
DPRINTF(("\n"));
/*
* allocate the space for all SCSI control blocks (SRB) for DMA memory
*/
all_sgsize = TRM_MAX_SRB * TRM_SG_SIZE;
if ((error = bus_dmamem_alloc(sc->sc_dmat, all_sgsize, PAGE_SIZE,
0, &seg, 1, &rseg, BUS_DMA_NOWAIT)) != 0) {
aprint_error(": unable to allocate SCSI REQUEST BLOCKS, "
"error = %d\n", error);
return 1;
}
if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg,
all_sgsize, (void **) &sc->sc_sglist,
BUS_DMA_NOWAIT | BUS_DMA_COHERENT)) != 0) {
aprint_error(": unable to map SCSI REQUEST BLOCKS, "
"error = %d\n", error);
return 1;
}
if ((error = bus_dmamap_create(sc->sc_dmat, all_sgsize, 1,
all_sgsize, 0, BUS_DMA_NOWAIT, &sc->sc_dmamap)) != 0) {
aprint_error(": unable to create SRB DMA maps, "
"error = %d\n", error);
return 1;
}
if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_dmamap,
sc->sc_sglist, all_sgsize, NULL, BUS_DMA_NOWAIT)) != 0) {
aprint_error(": unable to load SRB DMA maps, "
"error = %d\n", error);
return 1;
}
DPRINTF(("all_sgsize=%x\n", all_sgsize));
memset(sc->sc_sglist, 0, all_sgsize);
/*
* EEPROM CHECKSUM
*/
trm_check_eeprom(sc, &eeprom);
sc->sc_maxid = 7;
sc->sc_config = HCC_AUTOTERM | HCC_PARITY;
if (bus_space_read_1(iot, ioh, TRM_GEN_STATUS) & WIDESCSI) {
sc->sc_config |= HCC_WIDE_CARD;
sc->sc_maxid = 15;
}
if (eeprom.channel_cfg & NAC_POWERON_SCSI_RESET)
sc->sc_config |= HCC_SCSI_RESET;
sc->sc_actsrb = NULL;
sc->sc_id = eeprom.scsi_id;
sc->sc_flag = 0;
/*
* initialize and link all device's SRB queues of this adapter
*/
TAILQ_INIT(&sc->sc_freesrb);
TAILQ_INIT(&sc->sc_readysrb);
sc->sc_srb = malloc(sizeof(struct trm_srb) * TRM_MAX_SRB,
M_DEVBUF, M_NOWAIT|M_ZERO);
DPRINTF(("all SRB size=%zx\n", sizeof(struct trm_srb) * TRM_MAX_SRB));
if (sc->sc_srb == NULL) {
aprint_error(": can not allocate SRB\n");
return 1;
}
for (i = 0, srb = sc->sc_srb; i < TRM_MAX_SRB; i++) {
srb->sgentry = sc->sc_sglist + TRM_MAX_SG_ENTRIES * i;
srb->sgoffset = TRM_SG_SIZE * i;
srb->sgaddr = sc->sc_dmamap->dm_segs[0].ds_addr + srb->sgoffset;
/*
* map all SRB space to SRB_array
*/
if (bus_dmamap_create(sc->sc_dmat,
MAXPHYS, TRM_MAX_SG_ENTRIES, MAXPHYS, 0,
BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW, &srb->dmap)) {
aprint_error(": unable to create DMA transfer map.\n");
free(sc->sc_srb, M_DEVBUF);
return 1;
}
TAILQ_INSERT_TAIL(&sc->sc_freesrb, srb, next);
srb++;
}
/*
* initialize all target info structures
*/
for (target = 0; target < TRM_MAX_TARGETS; target++) {
ti = &sc->sc_tinfo[target];
ti->synctl = 0;
ti->offset = 0;
tconf = &eeprom.target[target];
ti->config0 = tconf->config0;
ti->period = trm_clock_period[tconf->period & 0x07];
ti->flag = 0;
if ((ti->config0 & NTC_DO_DISCONNECT) != 0) {
#ifdef notyet
if ((ti->config0 & NTC_DO_TAG_QUEUING) != 0)
ti->flag |= USE_TAG_QUEUING;
#endif
} else
ti->flag |= NO_RESELECT;
DPRINTF(("target %d: config0 = 0x%02x, period = 0x%02x",
target, ti->config0, ti->period));
DPRINTF((", flag = 0x%02x\n", ti->flag));
}
/* program configuration 0 */
bval = PHASELATCH | INITIATOR | BLOCKRST;
if ((sc->sc_config & HCC_PARITY) != 0)
bval |= PARITYCHECK;
bus_space_write_1(iot, ioh, TRM_SCSI_CONFIG0, bval);
/* program configuration 1 */
bus_space_write_1(iot, ioh, TRM_SCSI_CONFIG1,
ACTIVE_NEG | ACTIVE_NEGPLUS);
/* 250ms selection timeout */
bus_space_write_1(iot, ioh, TRM_SCSI_TIMEOUT, SEL_TIMEOUT);
/* Mask all interrupts */
bus_space_write_1(iot, ioh, TRM_DMA_INTEN, 0);
bus_space_write_1(iot, ioh, TRM_SCSI_INTEN, 0);
/* Reset SCSI module */
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL, DO_RSTMODULE);
/* program Host ID */
bus_space_write_1(iot, ioh, TRM_SCSI_HOSTID, sc->sc_id);
/* set asynchronous transfer */
bus_space_write_1(iot, ioh, TRM_SCSI_OFFSET, 0);
/* Turn LED control off */
bus_space_write_2(iot, ioh, TRM_GEN_CONTROL,
bus_space_read_2(iot, ioh, TRM_GEN_CONTROL) & ~EN_LED);
/* DMA config */
bus_space_write_2(iot, ioh, TRM_DMA_CONFIG,
bus_space_read_2(iot, ioh, TRM_DMA_CONFIG) | DMA_ENHANCE);
/* Clear pending interrupt status */
(void)bus_space_read_1(iot, ioh, TRM_SCSI_INTSTATUS);
/* Enable SCSI interrupt */
bus_space_write_1(iot, ioh, TRM_SCSI_INTEN,
EN_SELECT | EN_SELTIMEOUT | EN_DISCONNECT | EN_RESELECTED |
EN_SCSIRESET | EN_BUSSERVICE | EN_CMDDONE);
bus_space_write_1(iot, ioh, TRM_DMA_INTEN, EN_SCSIINTR);
trm_reset(sc);
return 0;
}
/*
* enqueues a SCSI command
* called by the higher level SCSI driver
*/
static void
trm_scsipi_request(struct scsipi_channel *chan, scsipi_adapter_req_t req,
void *arg)
{
bus_space_tag_t iot;
bus_space_handle_t ioh;
struct trm_softc *sc;
struct trm_srb *srb;
struct scsipi_xfer *xs;
int error, i, target, lun, s;
sc = device_private(chan->chan_adapter->adapt_dev);
iot = sc->sc_iot;
ioh = sc->sc_ioh;
switch (req) {
case ADAPTER_REQ_RUN_XFER:
xs = arg;
target = xs->xs_periph->periph_target;
lun = xs->xs_periph->periph_lun;
DPRINTF(("trm_scsipi_request.....\n"));
DPRINTF(("target= %d lun= %d\n", target, lun));
if (xs->xs_control & XS_CTL_RESET) {
trm_reset(sc);
xs->error = XS_NOERROR | XS_RESET;
return;
}
if (xs->xs_status & XS_STS_DONE) {
printf("%s: Is it done?\n", device_xname(sc->sc_dev));
xs->xs_status &= ~XS_STS_DONE;
}
s = splbio();
/* Get SRB */
srb = TAILQ_FIRST(&sc->sc_freesrb);
if (srb != NULL) {
TAILQ_REMOVE(&sc->sc_freesrb, srb, next);
} else {
xs->error = XS_RESOURCE_SHORTAGE;
scsipi_done(xs);
splx(s);
return;
}
srb->xs = xs;
srb->cmdlen = xs->cmdlen;
memcpy(srb->cmd, xs->cmd, xs->cmdlen);
if (xs->xs_control & (XS_CTL_DATA_IN | XS_CTL_DATA_OUT)) {
if ((error = bus_dmamap_load(sc->sc_dmat, srb->dmap,
xs->data, xs->datalen, NULL,
((xs->xs_control & XS_CTL_NOSLEEP) ?
BUS_DMA_NOWAIT : BUS_DMA_WAITOK) |
BUS_DMA_STREAMING |
((xs->xs_control & XS_CTL_DATA_IN) ?
BUS_DMA_READ : BUS_DMA_WRITE))) != 0) {
printf("%s: DMA transfer map unable to load, "
"error = %d\n", device_xname(sc->sc_dev),
error);
xs->error = XS_DRIVER_STUFFUP;
/*
* free SRB
*/
TAILQ_INSERT_TAIL(&sc->sc_freesrb, srb, next);
splx(s);
return;
}
bus_dmamap_sync(sc->sc_dmat, srb->dmap, 0,
srb->dmap->dm_mapsize,
(xs->xs_control & XS_CTL_DATA_IN) ?
BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
/* Set up the scatter gather list */
for (i = 0; i < srb->dmap->dm_nsegs; i++) {
srb->sgentry[i].address =
htole32(srb->dmap->dm_segs[i].ds_addr);
srb->sgentry[i].length =
htole32(srb->dmap->dm_segs[i].ds_len);
}
srb->buflen = xs->datalen;
srb->sgcnt = srb->dmap->dm_nsegs;
} else {
srb->sgentry[0].address = 0;
srb->sgentry[0].length = 0;
srb->buflen = 0;
srb->sgcnt = 0;
}
bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap,
srb->sgoffset, TRM_SG_SIZE, BUS_DMASYNC_PREWRITE);
sc->sc_phase = PH_BUS_FREE; /* SCSI bus free Phase */
srb->sgindex = 0;
srb->hastat = 0;
srb->tastat = 0;
srb->flag = 0;
TAILQ_INSERT_TAIL(&sc->sc_readysrb, srb, next);
if (sc->sc_actsrb == NULL)
trm_sched(sc);
splx(s);
if ((xs->xs_control & XS_CTL_POLL) != 0) {
int timeout = xs->timeout;
s = splbio();
do {
while (--timeout) {
DELAY(1000);
if (bus_space_read_2(iot, ioh,
TRM_SCSI_STATUS) & SCSIINTERRUPT)
break;
}
if (timeout == 0) {
trm_timeout(srb);
break;
} else
trm_intr(sc);
} while ((xs->xs_status & XS_STS_DONE) == 0);
splx(s);
}
return;
case ADAPTER_REQ_GROW_RESOURCES:
/* XXX Not supported. */
return;
case ADAPTER_REQ_SET_XFER_MODE:
{
struct trm_tinfo *ti;
struct scsipi_xfer_mode *xm;
xm = arg;
ti = &sc->sc_tinfo[xm->xm_target];
ti->flag &= ~(SYNC_NEGO_ENABLE|WIDE_NEGO_ENABLE);
#ifdef notyet
if ((xm->xm_mode & PERIPH_CAP_TQING) != 0)
ti->flag |= USE_TAG_QUEUING;
else
#endif
ti->flag &= ~USE_TAG_QUEUING;
if ((xm->xm_mode & PERIPH_CAP_WIDE16) != 0 &&
(sc->sc_config & HCC_WIDE_CARD) != 0 &&
(ti->config0 & NTC_DO_WIDE_NEGO) != 0) {
ti->flag |= WIDE_NEGO_ENABLE;
ti->flag &= ~WIDE_NEGO_DONE;
}
if ((xm->xm_mode & PERIPH_CAP_SYNC) != 0 &&
(ti->config0 & NTC_DO_SYNC_NEGO) != 0) {
ti->flag |= SYNC_NEGO_ENABLE;
ti->flag &= ~SYNC_NEGO_DONE;
ti->period = trm_clock_period[0];
}
/*
* If we're not going to negotiate, send the
* notification now, since it won't happen later.
*/
if ((ti->flag & (WIDE_NEGO_DONE|SYNC_NEGO_DONE)) ==
(WIDE_NEGO_DONE|SYNC_NEGO_DONE))
trm_update_xfer_mode(sc, xm->xm_target);
return;
}
}
}
static void
trm_update_xfer_mode(struct trm_softc *sc, int target)
{
struct scsipi_xfer_mode xm;
struct trm_tinfo *ti;
ti = &sc->sc_tinfo[target];
xm.xm_target = target;
xm.xm_mode = 0;
xm.xm_period = 0;
xm.xm_offset = 0;
if ((ti->synctl & WIDE_SYNC) != 0)
xm.xm_mode |= PERIPH_CAP_WIDE16;
if (ti->period > 0) {
xm.xm_mode |= PERIPH_CAP_SYNC;
xm.xm_period = ti->period;
xm.xm_offset = ti->offset;
}
#ifdef notyet
if ((ti->flag & USE_TAG_QUEUING) != 0)
xm.xm_mode |= PERIPH_CAP_TQING;
#endif
scsipi_async_event(&sc->sc_channel, ASYNC_EVENT_XFER_MODE, &xm);
}
static void
trm_sched(struct trm_softc *sc)
{
struct trm_srb *srb;
struct scsipi_periph *periph;
struct trm_tinfo *ti;
struct trm_linfo *li;
int s, lun, tag;
DPRINTF(("trm_sched...\n"));
TAILQ_FOREACH(srb, &sc->sc_readysrb, next) {
periph = srb->xs->xs_periph;
ti = &sc->sc_tinfo[periph->periph_target];
lun = periph->periph_lun;
/* select type of tag for this command */
if ((ti->flag & NO_RESELECT) != 0 ||
(ti->flag & USE_TAG_QUEUING) == 0 ||
(srb->flag & AUTO_REQSENSE) != 0 ||
(srb->xs->xs_control & XS_CTL_REQSENSE) != 0)
tag = 0;
else
tag = srb->xs->xs_tag_type;
#if 0
/* XXX use tags for polled commands? */
if (srb->xs->xs_control & XS_CTL_POLL)
tag = 0;
#endif
s = splbio();
li = ti->linfo[lun];
if (li == NULL) {
/* initialize lun info */
if ((li = malloc(sizeof(*li), M_DEVBUF,
M_NOWAIT|M_ZERO)) == NULL) {
splx(s);
continue;
}
ti->linfo[lun] = li;
}
if (tag == 0) {
/* try to issue this srb as an un-tagged command */
if (li->untagged == NULL)
li->untagged = srb;
}
if (li->untagged != NULL) {
tag = 0;
if (li->busy != 1 && li->used == 0) {
/* we need to issue the untagged command now */
srb = li->untagged;
periph = srb->xs->xs_periph;
} else {
/* not ready yet */
splx(s);
continue;
}
}
srb->tag[0] = tag;
if (tag != 0) {
li->queued[srb->xs->xs_tag_id] = srb;
srb->tag[1] = srb->xs->xs_tag_id;
li->used++;
}
if (li->untagged != NULL && li->busy != 1) {
li->busy = 1;
TAILQ_REMOVE(&sc->sc_readysrb, srb, next);
sc->sc_actsrb = srb;
trm_select(sc, srb);
splx(s);
break;
}
if (li->untagged == NULL && tag != 0) {
TAILQ_REMOVE(&sc->sc_readysrb, srb, next);
sc->sc_actsrb = srb;
trm_select(sc, srb);
splx(s);
break;
} else
splx(s);
}
}
static int
trm_select(struct trm_softc *sc, struct trm_srb *srb)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct scsipi_periph *periph = srb->xs->xs_periph;
int target = periph->periph_target;
int lun = periph->periph_lun;
struct trm_tinfo *ti = &sc->sc_tinfo[target];
uint8_t scsicmd;
DPRINTF(("trm_select.....\n"));
if ((srb->xs->xs_control & XS_CTL_POLL) == 0) {
callout_reset(&srb->xs->xs_callout, mstohz(srb->xs->timeout),
trm_timeout, srb);
}
bus_space_write_1(iot, ioh, TRM_SCSI_HOSTID, sc->sc_id);
bus_space_write_1(iot, ioh, TRM_SCSI_TARGETID, target);
bus_space_write_1(iot, ioh, TRM_SCSI_SYNC, ti->synctl);
bus_space_write_1(iot, ioh, TRM_SCSI_OFFSET, ti->offset);
/* Flush FIFO */
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL, DO_CLRFIFO);
DELAY(10);
sc->sc_phase = PH_BUS_FREE; /* initial phase */
DPRINTF(("cmd = 0x%02x\n", srb->cmd[0]));
if (((ti->flag & WIDE_NEGO_ENABLE) &&
(ti->flag & WIDE_NEGO_DONE) == 0) ||
((ti->flag & SYNC_NEGO_ENABLE) &&
(ti->flag & SYNC_NEGO_DONE) == 0)) {
sc->sc_state = TRM_MSGOUT;
bus_space_write_1(iot, ioh, TRM_SCSI_FIFO,
MSG_IDENTIFY(lun, 0));
bus_space_write_multi_1(iot, ioh,
TRM_SCSI_FIFO, srb->cmd, srb->cmdlen);
/* it's important for atn stop */
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL,
DO_DATALATCH | DO_HWRESELECT);
/* SCSI command */
bus_space_write_1(iot, ioh, TRM_SCSI_COMMAND, SCMD_SEL_ATNSTOP);
DPRINTF(("select with SEL_ATNSTOP\n"));
return 0;
}
if (srb->tag[0] != 0) {
/* Send identify message */
bus_space_write_1(iot, ioh, TRM_SCSI_FIFO,
MSG_IDENTIFY(lun, 1));
/* Send Tag id */
bus_space_write_1(iot, ioh, TRM_SCSI_FIFO, srb->tag[0]);
bus_space_write_1(iot, ioh, TRM_SCSI_FIFO, srb->tag[1]);
scsicmd = SCMD_SEL_ATN3;
DPRINTF(("select with SEL_ATN3\n"));
} else {
/* Send identify message */
bus_space_write_1(iot, ioh, TRM_SCSI_FIFO,
MSG_IDENTIFY(lun,
(ti->flag & NO_RESELECT) == 0 &&
(srb->flag & AUTO_REQSENSE) == 0 &&
(srb->xs->xs_control & XS_CTL_REQSENSE) == 0));
scsicmd = SCMD_SEL_ATN;
DPRINTF(("select with SEL_ATN\n"));
}
sc->sc_state = TRM_START;
/*
* Send CDB ..command block...
*/
bus_space_write_multi_1(iot, ioh, TRM_SCSI_FIFO, srb->cmd, srb->cmdlen);
/*
* If trm_select returns 0: current interrupt status
* is interrupt enable. It's said that SCSI processor is
* unoccupied.
*/
sc->sc_phase = PH_BUS_FREE; /* SCSI bus free Phase */
/* SCSI command */
bus_space_write_1(iot, ioh, TRM_SCSI_COMMAND, scsicmd);
return 0;
}
/*
* perform a hard reset on the SCSI bus (and TRM_S1040 chip).
*/
static void
trm_reset(struct trm_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int s;
DPRINTF(("trm_reset.........\n"));
s = splbio();
/* disable SCSI and DMA interrupt */
bus_space_write_1(iot, ioh, TRM_DMA_INTEN, 0);
bus_space_write_1(iot, ioh, TRM_SCSI_INTEN, 0);
trm_reset_scsi_bus(sc);
DELAY(100000);
/* Enable SCSI interrupt */
bus_space_write_1(iot, ioh, TRM_SCSI_INTEN,
EN_SELECT | EN_SELTIMEOUT | EN_DISCONNECT | EN_RESELECTED |
EN_SCSIRESET | EN_BUSSERVICE | EN_CMDDONE);
/* Enable DMA interrupt */
bus_space_write_1(iot, ioh, TRM_DMA_INTEN, EN_SCSIINTR);
/* Clear DMA FIFO */
bus_space_write_1(iot, ioh, TRM_DMA_CONTROL, CLRXFIFO);
/* Clear SCSI FIFO */
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL, DO_CLRFIFO);
sc->sc_actsrb = NULL;
sc->sc_flag = 0; /* RESET_DETECT, RESET_DONE, RESET_DEV */
splx(s);
}
static void
trm_timeout(void *arg)
{
struct trm_srb *srb = (struct trm_srb *)arg;
struct scsipi_xfer *xs;
struct scsipi_periph *periph;
struct trm_softc *sc;
int s;
if (srb == NULL) {
printf("trm_timeout called with srb == NULL\n");
return;
}
xs = srb->xs;
if (xs == NULL) {
printf("trm_timeout called with xs == NULL\n");
return;
}
periph = xs->xs_periph;
scsipi_printaddr(xs->xs_periph);
printf("SCSI OpCode 0x%02x timed out\n", xs->cmd->opcode);
sc = device_private(periph->periph_channel->chan_adapter->adapt_dev);
trm_reset_scsi_bus(sc);
s = splbio();
srb->flag |= SRB_TIMEOUT;
trm_done(sc, srb);
/* XXX needs more.. */
splx(s);
}
/*
* Catch an interrupt from the adapter
* Process pending device interrupts.
*/
static int
trm_intr(void *arg)
{
bus_space_tag_t iot;
bus_space_handle_t ioh;
struct trm_softc *sc;
int intstat, stat;
DPRINTF(("trm_intr......\n"));
sc = arg;
if (sc == NULL)
return 0;
iot = sc->sc_iot;
ioh = sc->sc_ioh;
stat = bus_space_read_2(iot, ioh, TRM_SCSI_STATUS);
if ((stat & SCSIINTERRUPT) == 0)
return 0;
DPRINTF(("stat = %04x, ", stat));
intstat = bus_space_read_1(iot, ioh, TRM_SCSI_INTSTATUS);
DPRINTF(("intstat=%02x, ", intstat));
if (intstat & (INT_SELTIMEOUT | INT_DISCONNECT)) {
DPRINTF(("\n"));
trm_disconnect(sc);
return 1;
}
if (intstat & INT_RESELECTED) {
DPRINTF(("\n"));
trm_reselect(sc);
return 1;
}
if (intstat & INT_SCSIRESET) {
DPRINTF(("\n"));
trm_scsi_reset_detect(sc);
return 1;
}
if (intstat & (INT_BUSSERVICE | INT_CMDDONE)) {
DPRINTF(("sc->sc_phase = %2d, sc->sc_state = %2d\n",
sc->sc_phase, sc->sc_state));
/*
* software sequential machine
*/
/*
* call phase0 functions... "phase entry" handle
* every phase before start transfer
*/
switch (sc->sc_phase) {
case PH_DATA_OUT:
trm_dataout_phase0(sc, stat);
break;
case PH_DATA_IN:
trm_datain_phase0(sc, stat);
break;
case PH_COMMAND:
break;
case PH_STATUS:
trm_status_phase0(sc);
stat = PH_BUS_FREE;
break;
case PH_MSG_OUT:
if (sc->sc_state == TRM_UNEXPECT_RESEL ||
sc->sc_state == TRM_ABORT_SENT)
stat = PH_BUS_FREE;
break;
case PH_MSG_IN:
trm_msgin_phase0(sc);
stat = PH_BUS_FREE;
break;
case PH_BUS_FREE:
break;
default:
printf("%s: unexpected phase in trm_intr() phase0\n",
device_xname(sc->sc_dev));
break;
}
sc->sc_phase = stat & PHASEMASK;
switch (sc->sc_phase) {
case PH_DATA_OUT:
trm_dataio_xfer(sc, XFERDATAOUT);
break;
case PH_DATA_IN:
trm_dataio_xfer(sc, XFERDATAIN);
break;
case PH_COMMAND:
trm_command_phase1(sc);
break;
case PH_STATUS:
trm_status_phase1(sc);
break;
case PH_MSG_OUT:
trm_msgout_phase1(sc);
break;
case PH_MSG_IN:
trm_msgin_phase1(sc);
break;
case PH_BUS_FREE:
break;
default:
printf("%s: unexpected phase in trm_intr() phase1\n",
device_xname(sc->sc_dev));
break;
}
return 1;
}
return 0;
}
static void
trm_msgout_phase1(struct trm_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct trm_srb *srb;
struct scsipi_periph *periph;
struct trm_tinfo *ti;
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL, DO_CLRFIFO);
srb = sc->sc_actsrb;
/* message out phase */
if (srb != NULL) {
periph = srb->xs->xs_periph;
ti = &sc->sc_tinfo[periph->periph_target];
if ((ti->flag & WIDE_NEGO_DOING) == 0 &&
(ti->flag & WIDE_NEGO_ENABLE)) {
/* send WDTR */
ti->flag &= ~SYNC_NEGO_DONE;
sc->sc_msgbuf[0] = MSG_IDENTIFY(periph->periph_lun, 0);
sc->sc_msgbuf[1] = MSG_EXTENDED;
sc->sc_msgbuf[2] = MSG_EXT_WDTR_LEN;
sc->sc_msgbuf[3] = MSG_EXT_WDTR;
sc->sc_msgbuf[4] = MSG_EXT_WDTR_BUS_16_BIT;
sc->sc_msgcnt = 5;
ti->flag |= WIDE_NEGO_DOING;
} else if ((ti->flag & SYNC_NEGO_DOING) == 0 &&
(ti->flag & SYNC_NEGO_ENABLE)) {
/* send SDTR */
int cnt = 0;
if ((ti->flag & WIDE_NEGO_DONE) == 0)
sc->sc_msgbuf[cnt++] =
MSG_IDENTIFY(periph->periph_lun, 0);
sc->sc_msgbuf[cnt++] = MSG_EXTENDED;
sc->sc_msgbuf[cnt++] = MSG_EXT_SDTR_LEN;
sc->sc_msgbuf[cnt++] = MSG_EXT_SDTR;
sc->sc_msgbuf[cnt++] = ti->period;
sc->sc_msgbuf[cnt++] = TRM_MAX_OFFSET;
sc->sc_msgcnt = cnt;
ti->flag |= SYNC_NEGO_DOING;
}
}
if (sc->sc_msgcnt == 0) {
sc->sc_msgbuf[0] = MSG_ABORT;
sc->sc_msgcnt = 1;
sc->sc_state = TRM_ABORT_SENT;
}
DPRINTF(("msgout: cnt = %d, ", sc->sc_msgcnt));
DPRINTF(("msgbuf = %02x %02x %02x %02x %02x %02x\n",
sc->sc_msgbuf[0], sc->sc_msgbuf[1], sc->sc_msgbuf[2],
sc->sc_msgbuf[3], sc->sc_msgbuf[4], sc->sc_msgbuf[5]));
bus_space_write_multi_1(iot, ioh, TRM_SCSI_FIFO,
sc->sc_msgbuf, sc->sc_msgcnt);
sc->sc_msgcnt = 0;
memset(sc->sc_msgbuf, 0, sizeof(sc->sc_msgbuf));
/* it's important for atn stop */
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL, DO_DATALATCH);
/*
* SCSI command
*/
bus_space_write_1(iot, ioh, TRM_SCSI_COMMAND, SCMD_FIFO_OUT);
}
static void
trm_command_phase1(struct trm_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct trm_srb *srb;
srb = sc->sc_actsrb;
if (srb == NULL) {
DPRINTF(("trm_command_phase1: no active srb\n"));
return;
}
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL, DO_CLRATN | DO_CLRFIFO);
bus_space_write_multi_1(iot, ioh, TRM_SCSI_FIFO, srb->cmd, srb->cmdlen);
sc->sc_state = TRM_COMMAND;
/* it's important for atn stop */
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL, DO_DATALATCH);
/*
* SCSI command
*/
bus_space_write_1(iot, ioh, TRM_SCSI_COMMAND, SCMD_FIFO_OUT);
}
static void
trm_dataout_phase0(struct trm_softc *sc, int stat)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct trm_srb *srb;
struct scsipi_periph *periph;
struct trm_tinfo *ti;
struct trm_sg_entry *sg;
int sgindex;
uint32_t xferlen, leftcnt = 0;
if (sc->sc_state == TRM_XFERPAD)
return;
srb = sc->sc_actsrb;
if (srb == NULL) {
DPRINTF(("trm_dataout_phase0: no active srb\n"));
return;
}
periph = srb->xs->xs_periph;
ti = &sc->sc_tinfo[periph->periph_target];
if ((stat & PARITYERROR) != 0)
srb->flag |= PARITY_ERROR;
if ((stat & SCSIXFERDONE) == 0) {
/*
* when data transfer from DMA FIFO to SCSI FIFO
* if there was some data left in SCSI FIFO
*/
leftcnt = bus_space_read_1(iot, ioh, TRM_SCSI_FIFOCNT) &
SCSI_FIFOCNT_MASK;
if (ti->synctl & WIDE_SYNC)
/*
* if WIDE scsi SCSI FIFOCNT unit is word
* so need to * 2
*/
leftcnt <<= 1;
}
/*
* calculate all the residue data that was not yet transferred
* SCSI transfer counter + left in SCSI FIFO data
*
* .....TRM_SCSI_XCNT (24bits)
* The counter always decrements by one for every SCSI
* byte transfer.
* .....TRM_SCSI_FIFOCNT ( 5bits)
* The counter is SCSI FIFO offset counter
*/
leftcnt += bus_space_read_4(iot, ioh, TRM_SCSI_XCNT);
if (leftcnt == 1) {
leftcnt = 0;
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL, DO_CLRFIFO);
}
if ((leftcnt == 0) || (stat & SCSIXFERCNT_2_ZERO)) {
while ((bus_space_read_1(iot, ioh, TRM_DMA_STATUS) &
DMAXFERCOMP) == 0)
; /* XXX needs timeout */
srb->buflen = 0;
} else {
/* Update SG list */
/*
* if transfer not yet complete
* there were some data residue in SCSI FIFO or
* SCSI transfer counter not empty
*/
if (srb->buflen != leftcnt) {
/* data that had transferred length */
xferlen = srb->buflen - leftcnt;
/* next time to be transferred length */
srb->buflen = leftcnt;
/*
* parsing from last time disconnect sgindex
*/
sg = srb->sgentry + srb->sgindex;
for (sgindex = srb->sgindex;
sgindex < srb->sgcnt;
sgindex++, sg++) {
/*
* find last time which SG transfer
* be disconnect
*/
if (xferlen >= le32toh(sg->length))
xferlen -= le32toh(sg->length);
else {
/*
* update last time
* disconnected SG list
*/
/* residue data length */
sg->length =
htole32(le32toh(sg->length)
- xferlen);
/* residue data pointer */
sg->address =
htole32(le32toh(sg->address)
+ xferlen);
srb->sgindex = sgindex;
break;
}
}
bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap,
srb->sgoffset, TRM_SG_SIZE, BUS_DMASYNC_PREWRITE);
}
}
bus_space_write_1(iot, ioh, TRM_DMA_CONTROL, STOPDMAXFER);
}
static void
trm_datain_phase0(struct trm_softc *sc, int stat)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct trm_srb *srb;
struct trm_sg_entry *sg;
int sgindex;
uint32_t xferlen, leftcnt = 0;
if (sc->sc_state == TRM_XFERPAD)
return;
srb = sc->sc_actsrb;
if (srb == NULL) {
DPRINTF(("trm_datain_phase0: no active srb\n"));
return;
}
if (stat & PARITYERROR)
srb->flag |= PARITY_ERROR;
leftcnt += bus_space_read_4(iot, ioh, TRM_SCSI_XCNT);
if ((leftcnt == 0) || (stat & SCSIXFERCNT_2_ZERO)) {
while ((bus_space_read_1(iot, ioh, TRM_DMA_STATUS) &
DMAXFERCOMP) == 0)
; /* XXX needs timeout */
srb->buflen = 0;
} else { /* phase changed */
/*
* parsing the case:
* when a transfer not yet complete
* but be disconnected by upper layer
* if transfer not yet complete
* there were some data residue in SCSI FIFO or
* SCSI transfer counter not empty
*/
if (srb->buflen != leftcnt) {
/*
* data that had transferred length
*/
xferlen = srb->buflen - leftcnt;
/*
* next time to be transferred length
*/
srb->buflen = leftcnt;
/*
* parsing from last time disconnect sgindex
*/
sg = srb->sgentry + srb->sgindex;
for (sgindex = srb->sgindex;
sgindex < srb->sgcnt;
sgindex++, sg++) {
/*
* find last time which SG transfer
* be disconnect
*/
if (xferlen >= le32toh(sg->length))
xferlen -= le32toh(sg->length);
else {
/*
* update last time
* disconnected SG list
*/
/* residue data length */
sg->length =
htole32(le32toh(sg->length)
- xferlen);
/* residue data pointer */
sg->address =
htole32(le32toh(sg->address)
+ xferlen);
srb->sgindex = sgindex;
break;
}
}
bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap,
srb->sgoffset, TRM_SG_SIZE, BUS_DMASYNC_PREWRITE);
}
}
}
static void
trm_dataio_xfer(struct trm_softc *sc, int iodir)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct trm_srb *srb;
struct scsipi_periph *periph;
struct trm_tinfo *ti;
srb = sc->sc_actsrb;
if (srb == NULL) {
DPRINTF(("trm_dataio_xfer: no active srb\n"));
return;
}
periph = srb->xs->xs_periph;
ti = &sc->sc_tinfo[periph->periph_target];
if (srb->sgindex < srb->sgcnt) {
if (srb->buflen > 0) {
/*
* load what physical address of Scatter/Gather
* list table want to be transfer
*/
sc->sc_state = TRM_DATA_XFER;
bus_space_write_4(iot, ioh, TRM_DMA_XHIGHADDR, 0);
bus_space_write_4(iot, ioh, TRM_DMA_XLOWADDR,
srb->sgaddr +
srb->sgindex * sizeof(struct trm_sg_entry));
/*
* load how many bytes in the Scatter/Gather list table
*/
bus_space_write_4(iot, ioh, TRM_DMA_XCNT,
(srb->sgcnt - srb->sgindex)
* sizeof(struct trm_sg_entry));
/*
* load total xfer length (24bits) max value 16Mbyte
*/
bus_space_write_4(iot, ioh, TRM_SCSI_XCNT, srb->buflen);
/* Start DMA transfer */
bus_space_write_1(iot, ioh, TRM_DMA_COMMAND,
iodir | SGXFER);
bus_space_write_1(iot, ioh, TRM_DMA_CONTROL,
STARTDMAXFER);
/* Start SCSI transfer */
/* it's important for atn stop */
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL,
DO_DATALATCH);
/*
* SCSI command
*/
bus_space_write_1(iot, ioh, TRM_SCSI_COMMAND,
(iodir == XFERDATAOUT) ?
SCMD_DMA_OUT : SCMD_DMA_IN);
} else { /* xfer pad */
if (srb->sgcnt) {
srb->hastat = H_OVER_UNDER_RUN;
}
bus_space_write_4(iot, ioh, TRM_SCSI_XCNT,
(ti->synctl & WIDE_SYNC) ? 2 : 1);
if (iodir == XFERDATAOUT)
bus_space_write_2(iot, ioh, TRM_SCSI_FIFO, 0);
else
(void)bus_space_read_2(iot, ioh, TRM_SCSI_FIFO);
sc->sc_state = TRM_XFERPAD;
/* it's important for atn stop */
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL,
DO_DATALATCH);
/*
* SCSI command
*/
bus_space_write_1(iot, ioh, TRM_SCSI_COMMAND,
(iodir == XFERDATAOUT) ?
SCMD_FIFO_OUT : SCMD_FIFO_IN);
}
}
}
static void
trm_status_phase0(struct trm_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct trm_srb *srb;
srb = sc->sc_actsrb;
if (srb == NULL) {
DPRINTF(("trm_status_phase0: no active srb\n"));
return;
}
srb->tastat = bus_space_read_1(iot, ioh, TRM_SCSI_FIFO);
sc->sc_state = TRM_COMPLETED;
/* it's important for atn stop */
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL, DO_DATALATCH);
/*
* SCSI command
*/
bus_space_write_1(iot, ioh, TRM_SCSI_COMMAND, SCMD_MSGACCEPT);
}
static void
trm_status_phase1(struct trm_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
if (bus_space_read_1(iot, ioh, TRM_DMA_COMMAND) & XFERDATAIN) {
if ((bus_space_read_1(iot, ioh, TRM_SCSI_FIFOCNT)
& SCSI_FIFO_EMPTY) == 0)
bus_space_write_2(iot, ioh,
TRM_SCSI_CONTROL, DO_CLRFIFO);
if ((bus_space_read_1(iot, ioh, TRM_DMA_FIFOSTATUS)
& DMA_FIFO_EMPTY) == 0)
bus_space_write_1(iot, ioh, TRM_DMA_CONTROL, CLRXFIFO);
} else {
if ((bus_space_read_1(iot, ioh, TRM_DMA_FIFOSTATUS)
& DMA_FIFO_EMPTY) == 0)
bus_space_write_1(iot, ioh, TRM_DMA_CONTROL, CLRXFIFO);
if ((bus_space_read_1(iot, ioh, TRM_SCSI_FIFOCNT)
& SCSI_FIFO_EMPTY) == 0)
bus_space_write_2(iot, ioh,
TRM_SCSI_CONTROL, DO_CLRFIFO);
}
sc->sc_state = TRM_STATUS;
/* it's important for atn stop */
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL, DO_DATALATCH);
/*
* SCSI command
*/
bus_space_write_1(iot, ioh, TRM_SCSI_COMMAND, SCMD_COMP);
}
static void
trm_msgin_phase0(struct trm_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct trm_srb *srb;
struct scsipi_periph *periph;
struct trm_tinfo *ti;
int index;
uint8_t msgin_code;
msgin_code = bus_space_read_1(iot, ioh, TRM_SCSI_FIFO);
if (sc->sc_state != TRM_EXTEND_MSGIN) {
DPRINTF(("msgin: code = %02x\n", msgin_code));
switch (msgin_code) {
case MSG_DISCONNECT:
sc->sc_state = TRM_DISCONNECTED;
break;
case MSG_SAVEDATAPOINTER:
break;
case MSG_EXTENDED:
case MSG_SIMPLE_Q_TAG:
case MSG_HEAD_OF_Q_TAG:
case MSG_ORDERED_Q_TAG:
sc->sc_state = TRM_EXTEND_MSGIN;
/* extended message (01h) */
sc->sc_msgbuf[0] = msgin_code;
sc->sc_msgcnt = 1;
/* extended message length (n) */
sc->sc_msg = &sc->sc_msgbuf[1];
break;
case MSG_MESSAGE_REJECT:
/* Reject message */
srb = sc->sc_actsrb;
if (srb == NULL) {
DPRINTF(("trm_msgin_phase0: "
" message reject without actsrb\n"));
break;
}
periph = srb->xs->xs_periph;
ti = &sc->sc_tinfo[periph->periph_target];
if (ti->flag & WIDE_NEGO_ENABLE) {
/* do wide nego reject */
ti->flag |= WIDE_NEGO_DONE;
ti->flag &=
~(SYNC_NEGO_DONE | WIDE_NEGO_ENABLE);
if ((ti->flag & SYNC_NEGO_ENABLE) &&
(ti->flag & SYNC_NEGO_DONE) == 0) {
/* Set ATN, in case ATN was clear */
sc->sc_state = TRM_MSGOUT;
bus_space_write_2(iot, ioh,
TRM_SCSI_CONTROL, DO_SETATN);
} else
/* Clear ATN */
bus_space_write_2(iot, ioh,
TRM_SCSI_CONTROL, DO_CLRATN);
} else if (ti->flag & SYNC_NEGO_ENABLE) {
/* do sync nego reject */
bus_space_write_2(iot, ioh,
TRM_SCSI_CONTROL, DO_CLRATN);
if (ti->flag & SYNC_NEGO_DOING) {
ti->flag &=~(SYNC_NEGO_ENABLE |
SYNC_NEGO_DONE);
ti->synctl = 0;
ti->offset = 0;
bus_space_write_1(iot, ioh,
TRM_SCSI_SYNC, ti->synctl);
bus_space_write_1(iot, ioh,
TRM_SCSI_OFFSET, ti->offset);
}
}
break;
case MSG_IGN_WIDE_RESIDUE:
bus_space_write_4(iot, ioh, TRM_SCSI_XCNT, 1);
(void)bus_space_read_1(iot, ioh, TRM_SCSI_FIFO);
break;
default:
/*
* Restore data pointer message
* Save data pointer message
* Completion message
* NOP message
*/
break;
}
} else {
/*
* when extend message in: sc->sc_state = TRM_EXTEND_MSGIN
* Parsing incoming extented messages
*/
*sc->sc_msg++ = msgin_code;
sc->sc_msgcnt++;
DPRINTF(("extended_msgin: cnt = %d, ", sc->sc_msgcnt));
DPRINTF(("msgbuf = %02x %02x %02x %02x %02x %02x\n",
sc->sc_msgbuf[0], sc->sc_msgbuf[1], sc->sc_msgbuf[2],
sc->sc_msgbuf[3], sc->sc_msgbuf[4], sc->sc_msgbuf[5]));
switch (sc->sc_msgbuf[0]) {
case MSG_SIMPLE_Q_TAG:
case MSG_HEAD_OF_Q_TAG:
case MSG_ORDERED_Q_TAG:
/*
* is QUEUE tag message :
*
* byte 0:
* HEAD QUEUE TAG (20h)
* ORDERED QUEUE TAG (21h)
* SIMPLE QUEUE TAG (22h)
* byte 1:
* Queue tag (00h - FFh)
*/
if (sc->sc_msgcnt == 2 && sc->sc_actsrb == NULL) {
/* XXX XXX XXX */
struct trm_linfo *li;
int tagid;
sc->sc_flag &= ~WAIT_TAGMSG;
tagid = sc->sc_msgbuf[1];
ti = &sc->sc_tinfo[sc->resel_target];
li = ti->linfo[sc->resel_lun];
srb = li->queued[tagid];
if (srb != NULL) {
sc->sc_actsrb = srb;
sc->sc_state = TRM_DATA_XFER;
break;
} else {
printf("%s: invalid tag id\n",
device_xname(sc->sc_dev));
}
sc->sc_state = TRM_UNEXPECT_RESEL;
sc->sc_msgbuf[0] = MSG_ABORT_TAG;
sc->sc_msgcnt = 1;
bus_space_write_2(iot, ioh,
TRM_SCSI_CONTROL, DO_SETATN);
} else
sc->sc_state = TRM_IDLE;
break;
case MSG_EXTENDED:
srb = sc->sc_actsrb;
if (srb == NULL) {
DPRINTF(("trm_msgin_phase0: "
"extended message without actsrb\n"));
break;
}
periph = srb->xs->xs_periph;
ti = &sc->sc_tinfo[periph->periph_target];
if (sc->sc_msgbuf[2] == MSG_EXT_WDTR &&
sc->sc_msgcnt == 4) {
/*
* is Wide data xfer Extended message :
* ======================================
* WIDE DATA TRANSFER REQUEST
* ======================================
* byte 0 : Extended message (01h)
* byte 1 : Extended message length (02h)
* byte 2 : WIDE DATA TRANSFER code (03h)
* byte 3 : Transfer width exponent
*/
if (sc->sc_msgbuf[1] != MSG_EXT_WDTR_LEN) {
/* Length is wrong, reject it */
ti->flag &= ~(WIDE_NEGO_ENABLE |
WIDE_NEGO_DONE);
sc->sc_state = TRM_MSGOUT;
sc->sc_msgbuf[0] = MSG_MESSAGE_REJECT;
sc->sc_msgcnt = 1;
bus_space_write_2(iot, ioh,
TRM_SCSI_CONTROL, DO_SETATN);
break;
}
if ((ti->flag & WIDE_NEGO_ENABLE) == 0)
sc->sc_msgbuf[3] =
MSG_EXT_WDTR_BUS_8_BIT;
if (sc->sc_msgbuf[3] >
MSG_EXT_WDTR_BUS_32_BIT) {
/* reject_msg: */
ti->flag &= ~(WIDE_NEGO_ENABLE |
WIDE_NEGO_DONE);
sc->sc_state = TRM_MSGOUT;
sc->sc_msgbuf[0] = MSG_MESSAGE_REJECT;
sc->sc_msgcnt = 1;
bus_space_write_2(iot, ioh,
TRM_SCSI_CONTROL, DO_SETATN);
break;
}
if (sc->sc_msgbuf[3] == MSG_EXT_WDTR_BUS_32_BIT)
/* do 16 bits */
sc->sc_msgbuf[3] =
MSG_EXT_WDTR_BUS_16_BIT;
if ((ti->flag & WIDE_NEGO_DONE) == 0) {
ti->flag |= WIDE_NEGO_DONE;
ti->flag &= ~(SYNC_NEGO_DONE |
WIDE_NEGO_ENABLE);
if (sc->sc_msgbuf[3] !=
MSG_EXT_WDTR_BUS_8_BIT)
/* is Wide data xfer */
ti->synctl |= WIDE_SYNC;
trm_update_xfer_mode(sc,
periph->periph_target);
}
sc->sc_state = TRM_MSGOUT;
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL,
DO_SETATN);
break;
} else if (sc->sc_msgbuf[2] == MSG_EXT_SDTR &&
sc->sc_msgcnt == 5) {
/*
* is 8bit transfer Extended message :
* =================================
* SYNCHRONOUS DATA TRANSFER REQUEST
* =================================
* byte 0 : Extended message (01h)
* byte 1 : Extended message length (03)
* byte 2 : SYNC DATA TRANSFER code (01h)
* byte 3 : Transfer period factor
* byte 4 : REQ/ACK offset
*/
if (sc->sc_msgbuf[1] != MSG_EXT_SDTR_LEN) {
/* reject_msg */
sc->sc_state = TRM_MSGOUT;
sc->sc_msgbuf[0] = MSG_MESSAGE_REJECT;
sc->sc_msgcnt = 1;
bus_space_write_2(iot, ioh,
TRM_SCSI_CONTROL, DO_SETATN);
break;
}
if ((ti->flag & SYNC_NEGO_DONE) == 0) {
ti->flag &=
~(SYNC_NEGO_ENABLE|SYNC_NEGO_DOING);
ti->flag |= SYNC_NEGO_DONE;
if (sc->sc_msgbuf[3] >= TRM_MAX_PERIOD)
sc->sc_msgbuf[3] = 0;
if (sc->sc_msgbuf[4] > TRM_MAX_OFFSET)
sc->sc_msgbuf[4] =
TRM_MAX_OFFSET;
if (sc->sc_msgbuf[3] == 0 ||
sc->sc_msgbuf[4] == 0) {
/* set async */
ti->synctl = 0;
ti->offset = 0;
} else {
/* set sync */
/* Transfer period factor */
ti->period = sc->sc_msgbuf[3];
/* REQ/ACK offset */
ti->offset = sc->sc_msgbuf[4];
for (index = 0;
index < NPERIOD;
index++)
if (ti->period <=
trm_clock_period[
index])
break;
ti->synctl |= ALT_SYNC | index;
}
/*
* program SCSI control register
*/
bus_space_write_1(iot, ioh,
TRM_SCSI_SYNC, ti->synctl);
bus_space_write_1(iot, ioh,
TRM_SCSI_OFFSET, ti->offset);
trm_update_xfer_mode(sc,
periph->periph_target);
}
sc->sc_state = TRM_IDLE;
}
break;
default:
break;
}
}
/* it's important for atn stop */
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL, DO_DATALATCH);
/*
* SCSI command
*/
bus_space_write_1(iot, ioh, TRM_SCSI_COMMAND, SCMD_MSGACCEPT);
}
static void
trm_msgin_phase1(struct trm_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL, DO_CLRFIFO);
bus_space_write_4(iot, ioh, TRM_SCSI_XCNT, 1);
if (sc->sc_state != TRM_MSGIN && sc->sc_state != TRM_EXTEND_MSGIN) {
sc->sc_state = TRM_MSGIN;
}
/* it's important for atn stop */
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL, DO_DATALATCH);
/*
* SCSI command
*/
bus_space_write_1(iot, ioh, TRM_SCSI_COMMAND, SCMD_FIFO_IN);
}
static void
trm_disconnect(struct trm_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct trm_srb *srb;
int s;
s = splbio();
srb = sc->sc_actsrb;
DPRINTF(("trm_disconnect...............\n"));
if (srb == NULL) {
DPRINTF(("trm_disconnect: no active srb\n"));
DELAY(1000); /* 1 msec */
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL,
DO_CLRFIFO | DO_HWRESELECT);
return;
}
sc->sc_phase = PH_BUS_FREE; /* SCSI bus free Phase */
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL,
DO_CLRFIFO | DO_HWRESELECT);
DELAY(100);
switch (sc->sc_state) {
case TRM_UNEXPECT_RESEL:
sc->sc_state = TRM_IDLE;
break;
case TRM_ABORT_SENT:
goto finish;
case TRM_START:
case TRM_MSGOUT:
{
/* Selection time out - discard all LUNs if empty */
struct scsipi_periph *periph;
struct trm_tinfo *ti;
struct trm_linfo *li;
int lun;
DPRINTF(("selection timeout\n"));
srb->tastat = SCSI_SEL_TIMEOUT; /* XXX Ok? */
periph = srb->xs->xs_periph;
ti = &sc->sc_tinfo[periph->periph_target];
for (lun = 0; lun < TRM_MAX_LUNS; lun++) {
li = ti->linfo[lun];
if (li != NULL &&
li->untagged == NULL && li->used == 0) {
ti->linfo[lun] = NULL;
free(li, M_DEVBUF);
}
}
}
goto finish;
case TRM_DISCONNECTED:
sc->sc_actsrb = NULL;
sc->sc_state = TRM_IDLE;
goto sched;
case TRM_COMPLETED:
goto finish;
}
out:
splx(s);
return;
finish:
sc->sc_state = TRM_IDLE;
trm_done(sc, srb);
goto out;
sched:
trm_sched(sc);
goto out;
}
static void
trm_reselect(struct trm_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
struct trm_tinfo *ti;
struct trm_linfo *li;
int target, lun;
DPRINTF(("trm_reselect.................\n"));
if (sc->sc_actsrb != NULL) {
/* arbitration lost but reselection win */
sc->sc_state = TRM_READY;
target = sc->sc_actsrb->xs->xs_periph->periph_target;
ti = &sc->sc_tinfo[target];
} else {
/* Read Reselected Target Id and LUN */
target = bus_space_read_1(iot, ioh, TRM_SCSI_TARGETID);
lun = bus_space_read_1(iot, ioh, TRM_SCSI_IDMSG) & 0x07;
ti = &sc->sc_tinfo[target];
li = ti->linfo[lun];
DPRINTF(("target = %d, lun = %d\n", target, lun));
/*
* Check to see if we are running an un-tagged command.
* Otherwise ack the IDENTIFY and wait for a tag message.
*/
if (li != NULL) {
if (li->untagged != NULL && li->busy) {
sc->sc_actsrb = li->untagged;
sc->sc_state = TRM_DATA_XFER;
} else {
sc->resel_target = target;
sc->resel_lun = lun;
/* XXX XXX XXX */
sc->sc_flag |= WAIT_TAGMSG;
}
}
if ((ti->flag & USE_TAG_QUEUING) == 0 &&
sc->sc_actsrb == NULL) {
printf("%s: reselect from target %d lun %d "
"without nexus; sending abort\n",
device_xname(sc->sc_dev), target, lun);
sc->sc_state = TRM_UNEXPECT_RESEL;
sc->sc_msgbuf[0] = MSG_ABORT_TAG;
sc->sc_msgcnt = 1;
bus_space_write_2(iot, ioh,
TRM_SCSI_CONTROL, DO_SETATN);
}
}
sc->sc_phase = PH_BUS_FREE; /* SCSI bus free Phase */
/*
* Program HA ID, target ID, period and offset
*/
/* target ID */
bus_space_write_1(iot, ioh, TRM_SCSI_TARGETID, target);
/* host ID */
bus_space_write_1(iot, ioh, TRM_SCSI_HOSTID, sc->sc_id);
/* period */
bus_space_write_1(iot, ioh, TRM_SCSI_SYNC, ti->synctl);
/* offset */
bus_space_write_1(iot, ioh, TRM_SCSI_OFFSET, ti->offset);
/* it's important for atn stop */
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL, DO_DATALATCH);
/*
* SCSI command
*/
/* to rls the /ACK signal */
bus_space_write_1(iot, ioh, TRM_SCSI_COMMAND, SCMD_MSGACCEPT);
}
/*
* Complete execution of a SCSI command
* Signal completion to the generic SCSI driver
*/
static void
trm_done(struct trm_softc *sc, struct trm_srb *srb)
{
struct scsipi_xfer *xs = srb->xs;
DPRINTF(("trm_done..................\n"));
if (xs == NULL)
return;
if ((xs->xs_control & XS_CTL_POLL) == 0)
callout_stop(&xs->xs_callout);
if (xs->xs_control & (XS_CTL_DATA_IN | XS_CTL_DATA_OUT) ||
srb->flag & AUTO_REQSENSE) {
bus_dmamap_sync(sc->sc_dmat, srb->dmap, 0,
srb->dmap->dm_mapsize,
((xs->xs_control & XS_CTL_DATA_IN) ||
(srb->flag & AUTO_REQSENSE)) ?
BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->sc_dmat, srb->dmap);
}
/*
* target status
*/
xs->status = srb->tastat;
DPRINTF(("xs->status = 0x%02x\n", xs->status));
switch (xs->status) {
case SCSI_OK:
/*
* process initiator status......
* Adapter (initiator) status
*/
if ((srb->hastat & H_OVER_UNDER_RUN) != 0) {
printf("%s: over/under run error\n",
device_xname(sc->sc_dev));
srb->tastat = 0;
/* Illegal length (over/under run) */
xs->error = XS_DRIVER_STUFFUP;
} else if ((srb->flag & PARITY_ERROR) != 0) {
printf("%s: parity error\n", device_xname(sc->sc_dev));
/* Driver failed to perform operation */
xs->error = XS_DRIVER_STUFFUP; /* XXX */
} else if ((srb->flag & SRB_TIMEOUT) != 0) {
xs->resid = srb->buflen;
xs->error = XS_TIMEOUT;
} else {
/* No error */
xs->resid = srb->buflen;
srb->hastat = 0;
if (srb->flag & AUTO_REQSENSE) {
/* there is no error, (sense is invalid) */
xs->error = XS_SENSE;
} else {
srb->tastat = 0;
xs->error = XS_NOERROR;
}
}
break;
case SCSI_CHECK:
if ((srb->flag & AUTO_REQSENSE) != 0 ||
trm_request_sense(sc, srb) != 0) {
printf("%s: request sense failed\n",
device_xname(sc->sc_dev));
xs->error = XS_DRIVER_STUFFUP;
break;
}
xs->error = XS_SENSE;
return;
case SCSI_SEL_TIMEOUT:
srb->hastat = H_SEL_TIMEOUT;
srb->tastat = 0;
xs->error = XS_SELTIMEOUT;
break;
case SCSI_QUEUE_FULL:
case SCSI_BUSY:
xs->error = XS_BUSY;
break;
case SCSI_RESV_CONFLICT:
DPRINTF(("%s: target reserved at ", device_xname(sc->sc_dev)));
DPRINTF(("%s %d\n", __FILE__, __LINE__));
xs->error = XS_BUSY;
break;
default:
srb->hastat = 0;
printf("%s: trm_done(): unknown status = %02x\n",
device_xname(sc->sc_dev), xs->status);
xs->error = XS_DRIVER_STUFFUP;
break;
}
trm_dequeue(sc, srb);
if (srb == sc->sc_actsrb) {
sc->sc_actsrb = NULL;
trm_sched(sc);
}
TAILQ_INSERT_TAIL(&sc->sc_freesrb, srb, next);
/* Notify cmd done */
scsipi_done(xs);
}
static int
trm_request_sense(struct trm_softc *sc, struct trm_srb *srb)
{
struct scsipi_xfer *xs;
struct scsipi_periph *periph;
struct trm_tinfo *ti;
struct trm_linfo *li;
struct scsi_request_sense *ss = (struct scsi_request_sense *)srb->cmd;
int error;
DPRINTF(("trm_request_sense...\n"));
xs = srb->xs;
periph = xs->xs_periph;
srb->flag |= AUTO_REQSENSE;
/* Status of initiator/target */
srb->hastat = 0;
srb->tastat = 0;
memset(ss, 0, sizeof(*ss));
ss->opcode = SCSI_REQUEST_SENSE;
ss->byte2 = periph->periph_lun << SCSI_CMD_LUN_SHIFT;
ss->length = sizeof(struct scsi_sense_data);
srb->buflen = sizeof(struct scsi_sense_data);
srb->sgcnt = 1;
srb->sgindex = 0;
srb->cmdlen = sizeof(struct scsi_request_sense);
if ((error = bus_dmamap_load(sc->sc_dmat, srb->dmap,
&xs->sense.scsi_sense, srb->buflen, NULL,
BUS_DMA_READ|BUS_DMA_NOWAIT)) != 0) {
return error;
}
bus_dmamap_sync(sc->sc_dmat, srb->dmap, 0,
srb->buflen, BUS_DMASYNC_PREREAD);
srb->sgentry[0].address = htole32(srb->dmap->dm_segs[0].ds_addr);
srb->sgentry[0].length = htole32(sizeof(struct scsi_sense_data));
bus_dmamap_sync(sc->sc_dmat, sc->sc_dmamap, srb->sgoffset,
TRM_SG_SIZE, BUS_DMASYNC_PREWRITE);
ti = &sc->sc_tinfo[periph->periph_target];
li = ti->linfo[periph->periph_lun];
if (li->busy > 0)
li->busy = 0;
trm_dequeue(sc, srb);
li->untagged = srb; /* must be executed first to fix C/A */
li->busy = 2;
if (srb == sc->sc_actsrb)
trm_select(sc, srb);
else {
TAILQ_INSERT_HEAD(&sc->sc_readysrb, srb, next);
if (sc->sc_actsrb == NULL)
trm_sched(sc);
}
return 0;
}
static void
trm_dequeue(struct trm_softc *sc, struct trm_srb *srb)
{
struct scsipi_periph *periph;
struct trm_tinfo *ti;
struct trm_linfo *li;
periph = srb->xs->xs_periph;
ti = &sc->sc_tinfo[periph->periph_target];
li = ti->linfo[periph->periph_lun];
if (li->untagged == srb) {
li->busy = 0;
li->untagged = NULL;
}
if (srb->tag[0] != 0 && li->queued[srb->tag[1]] != NULL) {
li->queued[srb->tag[1]] = NULL;
li->used--;
}
}
static void
trm_reset_scsi_bus(struct trm_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int timeout, s;
DPRINTF(("trm_reset_scsi_bus.........\n"));
s = splbio();
sc->sc_flag |= RESET_DEV;
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL, DO_RSTSCSI);
for (timeout = 20000; timeout >= 0; timeout--) {
DELAY(1);
if ((bus_space_read_2(iot, ioh, TRM_SCSI_INTSTATUS) &
INT_SCSIRESET) == 0)
break;
}
if (timeout == 0)
printf(": scsibus reset timeout\n");
splx(s);
}
static void
trm_scsi_reset_detect(struct trm_softc *sc)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int s;
DPRINTF(("trm_scsi_reset_detect...............\n"));
DELAY(1000000); /* delay 1 sec */
s = splbio();
bus_space_write_1(iot, ioh, TRM_DMA_CONTROL, STOPDMAXFER);
bus_space_write_2(iot, ioh, TRM_SCSI_CONTROL, DO_CLRFIFO);
if (sc->sc_flag & RESET_DEV) {
sc->sc_flag |= RESET_DONE;
} else {
sc->sc_flag |= RESET_DETECT;
sc->sc_actsrb = NULL;
sc->sc_flag = 0;
trm_sched(sc);
}
splx(s);
}
/*
* read seeprom 128 bytes to struct eeprom and check checksum.
* If it is wrong, update with default value.
*/
static void
trm_check_eeprom(struct trm_softc *sc, struct trm_nvram *eeprom)
{
struct nvram_target *target;
uint16_t *ep;
uint16_t chksum;
int i;
DPRINTF(("trm_check_eeprom......\n"));
trm_eeprom_read_all(sc, eeprom);
ep = (uint16_t *)eeprom;
chksum = 0;
for (i = 0; i < 64; i++)
chksum += le16toh(*ep++);
if (chksum != TRM_NVRAM_CKSUM) {
DPRINTF(("TRM_S1040 EEPROM Check Sum ERROR (load default).\n"));
/*
* Checksum error, load default
*/
eeprom->subvendor_id[0] = PCI_VENDOR_TEKRAM2 & 0xFF;
eeprom->subvendor_id[1] = PCI_VENDOR_TEKRAM2 >> 8;
eeprom->subsys_id[0] = PCI_PRODUCT_TEKRAM2_DC315 & 0xFF;
eeprom->subsys_id[1] = PCI_PRODUCT_TEKRAM2_DC315 >> 8;
eeprom->subclass = 0x00;
eeprom->vendor_id[0] = PCI_VENDOR_TEKRAM2 & 0xFF;
eeprom->vendor_id[1] = PCI_VENDOR_TEKRAM2 >> 8;
eeprom->device_id[0] = PCI_PRODUCT_TEKRAM2_DC315 & 0xFF;
eeprom->device_id[1] = PCI_PRODUCT_TEKRAM2_DC315 >> 8;
eeprom->reserved0 = 0x00;
for (i = 0, target = eeprom->target;
i < TRM_MAX_TARGETS;
i++, target++) {
target->config0 = 0x77;
target->period = 0x00;
target->config2 = 0x00;
target->config3 = 0x00;
}
eeprom->scsi_id = 7;
eeprom->channel_cfg = 0x0F;
eeprom->delay_time = 0;
eeprom->max_tag = 4;
eeprom->reserved1 = 0x15;
eeprom->boot_target = 0;
eeprom->boot_lun = 0;
eeprom->reserved2 = 0;
memset(eeprom->reserved3, 0, sizeof(eeprom->reserved3));
chksum = 0;
ep = (uint16_t *)eeprom;
for (i = 0; i < 63; i++)
chksum += le16toh(*ep++);
chksum = TRM_NVRAM_CKSUM - chksum;
eeprom->checksum0 = chksum & 0xFF;
eeprom->checksum1 = chksum >> 8;
trm_eeprom_write_all(sc, eeprom);
}
}
/*
* write struct eeprom 128 bytes to seeprom
*/
static void
trm_eeprom_write_all(struct trm_softc *sc, struct trm_nvram *eeprom)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
uint8_t *sbuf = (uint8_t *)eeprom;
uint8_t addr;
/* Enable SEEPROM */
bus_space_write_1(iot, ioh, TRM_GEN_CONTROL,
bus_space_read_1(iot, ioh, TRM_GEN_CONTROL) | EN_EEPROM);
/*
* Write enable
*/
trm_eeprom_write_cmd(sc, 0x04, 0xFF);
bus_space_write_1(iot, ioh, TRM_GEN_NVRAM, 0);
trm_eeprom_wait();
for (addr = 0; addr < 128; addr++, sbuf++)
trm_eeprom_set_data(sc, addr, *sbuf);
/*
* Write disable
*/
trm_eeprom_write_cmd(sc, 0x04, 0x00);
bus_space_write_1(iot, ioh, TRM_GEN_NVRAM, 0);
trm_eeprom_wait();
/* Disable SEEPROM */
bus_space_write_1(iot, ioh, TRM_GEN_CONTROL,
bus_space_read_1(iot, ioh, TRM_GEN_CONTROL) & ~EN_EEPROM);
}
/*
* write one byte to seeprom
*/
static void
trm_eeprom_set_data(struct trm_softc *sc, uint8_t addr, uint8_t data)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int i;
uint8_t send;
/*
* Send write command & address
*/
trm_eeprom_write_cmd(sc, 0x05, addr);
/*
* Write data
*/
for (i = 0; i < 8; i++, data <<= 1) {
send = NVR_SELECT;
if (data & 0x80) /* Start from bit 7 */
send |= NVR_BITOUT;
bus_space_write_1(iot, ioh, TRM_GEN_NVRAM, send);
trm_eeprom_wait();
bus_space_write_1(iot, ioh, TRM_GEN_NVRAM, send | NVR_CLOCK);
trm_eeprom_wait();
}
bus_space_write_1(iot, ioh, TRM_GEN_NVRAM, NVR_SELECT);
trm_eeprom_wait();
/*
* Disable chip select
*/
bus_space_write_1(iot, ioh, TRM_GEN_NVRAM, 0);
trm_eeprom_wait();
bus_space_write_1(iot, ioh, TRM_GEN_NVRAM, NVR_SELECT);
trm_eeprom_wait();
/*
* Wait for write ready
*/
for (;;) {
bus_space_write_1(iot, ioh, TRM_GEN_NVRAM,
NVR_SELECT | NVR_CLOCK);
trm_eeprom_wait();
bus_space_write_1(iot, ioh, TRM_GEN_NVRAM, NVR_SELECT);
trm_eeprom_wait();
if (bus_space_read_1(iot, ioh, TRM_GEN_NVRAM) & NVR_BITIN)
break;
}
/*
* Disable chip select
*/
bus_space_write_1(iot, ioh, TRM_GEN_NVRAM, 0);
}
/*
* read seeprom 128 bytes to struct eeprom
*/
static void
trm_eeprom_read_all(struct trm_softc *sc, struct trm_nvram *eeprom)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
uint8_t *sbuf = (uint8_t *)eeprom;
uint8_t addr;
/*
* Enable SEEPROM
*/
bus_space_write_1(iot, ioh, TRM_GEN_CONTROL,
bus_space_read_1(iot, ioh, TRM_GEN_CONTROL) | EN_EEPROM);
for (addr = 0; addr < 128; addr++)
*sbuf++ = trm_eeprom_get_data(sc, addr);
/*
* Disable SEEPROM
*/
bus_space_write_1(iot, ioh, TRM_GEN_CONTROL,
bus_space_read_1(iot, ioh, TRM_GEN_CONTROL) & ~EN_EEPROM);
}
/*
* read one byte from seeprom
*/
static uint8_t
trm_eeprom_get_data(struct trm_softc *sc, uint8_t addr)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int i;
uint8_t read, data = 0;
/*
* Send read command & address
*/
trm_eeprom_write_cmd(sc, 0x06, addr);
for (i = 0; i < 8; i++) { /* Read data */
bus_space_write_1(iot, ioh, TRM_GEN_NVRAM,
NVR_SELECT | NVR_CLOCK);
trm_eeprom_wait();
bus_space_write_1(iot, ioh, TRM_GEN_NVRAM, NVR_SELECT);
/*
* Get data bit while falling edge
*/
read = bus_space_read_1(iot, ioh, TRM_GEN_NVRAM);
data <<= 1;
if (read & NVR_BITIN)
data |= 1;
trm_eeprom_wait();
}
/*
* Disable chip select
*/
bus_space_write_1(iot, ioh, TRM_GEN_NVRAM, 0);
return data;
}
/*
* write SB and Op Code into seeprom
*/
static void
trm_eeprom_write_cmd(struct trm_softc *sc, uint8_t cmd, uint8_t addr)
{
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
int i;
uint8_t send;
/* Program SB+OP code */
for (i = 0; i < 3; i++, cmd <<= 1) {
send = NVR_SELECT;
if (cmd & 0x04) /* Start from bit 2 */
send |= NVR_BITOUT;
bus_space_write_1(iot, ioh, TRM_GEN_NVRAM, send);
trm_eeprom_wait();
bus_space_write_1(iot, ioh, TRM_GEN_NVRAM, send | NVR_CLOCK);
trm_eeprom_wait();
}
/* Program address */
for (i = 0; i < 7; i++, addr <<= 1) {
send = NVR_SELECT;
if (addr & 0x40) /* Start from bit 6 */
send |= NVR_BITOUT;
bus_space_write_1(iot, ioh, TRM_GEN_NVRAM, send);
trm_eeprom_wait();
bus_space_write_1(iot, ioh, TRM_GEN_NVRAM, send | NVR_CLOCK);
trm_eeprom_wait();
}
bus_space_write_1(iot, ioh, TRM_GEN_NVRAM, NVR_SELECT);
trm_eeprom_wait();
}
Reference in New Issue View Git Blame Copy Permalink