1447 lines
43 KiB
C
1447 lines
43 KiB
C
/* $NetBSD: aacreg.h,v 1.13 2008/10/02 08:21:57 sborrill Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 2002, 2007 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Andrew Doran.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*-
|
|
* Copyright (c) 2000 Michael Smith
|
|
* Copyright (c) 2000-2001 Scott Long
|
|
* Copyright (c) 2000 BSDi
|
|
* Copyright (c) 2000 Niklas Hallqvist
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* from FreeBSD: aacreg.h,v 1.1 2000/09/13 03:20:34 msmith Exp
|
|
* via OpenBSD: aacreg.h,v 1.3 2001/06/12 15:40:29 niklas Exp
|
|
* incorporating some of: aacreg.h,v 1.23 2005/10/14 16:22:45 scottl Exp
|
|
*/
|
|
|
|
/*
|
|
* Data structures defining the interface between the driver and the Adaptec
|
|
* 'FSA' adapters. Note that many field names and comments here are taken
|
|
* verbatim from the Adaptec driver source in order to make comparing the
|
|
* two slightly easier.
|
|
*/
|
|
|
|
#ifndef _PCI_AACREG_H_
|
|
#define _PCI_AACREG_H_
|
|
|
|
/*
|
|
* Misc. magic numbers.
|
|
*/
|
|
#define AAC_MAX_CONTAINERS 64
|
|
#define AAC_BLOCK_SIZE 512
|
|
|
|
/*
|
|
* Communications interface.
|
|
*
|
|
* Where datastructure layouts are closely parallel to the Adaptec sample code,
|
|
* retain their naming conventions (for now) to aid in cross-referencing.
|
|
*/
|
|
|
|
/*
|
|
* We establish 4 command queues and matching response queues. Queues must
|
|
* be 16-byte aligned, and are sized as follows:
|
|
*/
|
|
#define AAC_HOST_NORM_CMD_ENTRIES 8 /* cmd adapter->host, normal pri */
|
|
#define AAC_HOST_HIGH_CMD_ENTRIES 4 /* cmd adapter->host, high pri */
|
|
#define AAC_ADAP_NORM_CMD_ENTRIES 512 /* cmd host->adapter, normal pri */
|
|
#define AAC_ADAP_HIGH_CMD_ENTRIES 4 /* cmd host->adapter, high pri */
|
|
#define AAC_HOST_NORM_RESP_ENTRIES 512 /* resp, adapter->host, normal pri */
|
|
#define AAC_HOST_HIGH_RESP_ENTRIES 4 /* resp, adapter->host, high pri */
|
|
#define AAC_ADAP_NORM_RESP_ENTRIES 8 /* resp, host->adapter, normal pri */
|
|
#define AAC_ADAP_HIGH_RESP_ENTRIES 4 /* resp, host->adapter, high pri */
|
|
|
|
#define AAC_TOTALQ_LENGTH \
|
|
(AAC_HOST_HIGH_CMD_ENTRIES + AAC_HOST_NORM_CMD_ENTRIES + \
|
|
AAC_ADAP_HIGH_CMD_ENTRIES + AAC_ADAP_NORM_CMD_ENTRIES + \
|
|
AAC_HOST_HIGH_RESP_ENTRIES + AAC_HOST_NORM_RESP_ENTRIES + \
|
|
AAC_ADAP_HIGH_RESP_ENTRIES + AAC_ADAP_NORM_RESP_ENTRIES)
|
|
|
|
#define AAC_QUEUE_COUNT 8
|
|
#define AAC_QUEUE_ALIGN 16
|
|
|
|
struct aac_queue_entry {
|
|
u_int32_t aq_fib_size; /* FIB size in bytes */
|
|
u_int32_t aq_fib_addr; /* receiver-space address of the FIB */
|
|
} __packed;
|
|
|
|
#define AAC_PRODUCER_INDEX 0
|
|
#define AAC_CONSUMER_INDEX 1
|
|
|
|
/*
|
|
* Table of queue indices and queues used to communicate with the
|
|
* controller. This structure must be aligned to AAC_QUEUE_ALIGN
|
|
*/
|
|
struct aac_queue_table {
|
|
/* queue consumer/producer indexes (layout mandated by adapter) */
|
|
u_int32_t qt_qindex[AAC_QUEUE_COUNT][2];
|
|
|
|
/* queue entry structures (layout mandated by adapter) */
|
|
struct aac_queue_entry qt_HostNormCmdQueue[AAC_HOST_NORM_CMD_ENTRIES];
|
|
struct aac_queue_entry qt_HostHighCmdQueue[AAC_HOST_HIGH_CMD_ENTRIES];
|
|
struct aac_queue_entry qt_AdapNormCmdQueue[AAC_ADAP_NORM_CMD_ENTRIES];
|
|
struct aac_queue_entry qt_AdapHighCmdQueue[AAC_ADAP_HIGH_CMD_ENTRIES];
|
|
struct aac_queue_entry
|
|
qt_HostNormRespQueue[AAC_HOST_NORM_RESP_ENTRIES];
|
|
struct aac_queue_entry
|
|
qt_HostHighRespQueue[AAC_HOST_HIGH_RESP_ENTRIES];
|
|
struct aac_queue_entry
|
|
qt_AdapNormRespQueue[AAC_ADAP_NORM_RESP_ENTRIES];
|
|
struct aac_queue_entry
|
|
qt_AdapHighRespQueue[AAC_ADAP_HIGH_RESP_ENTRIES];
|
|
} __packed;
|
|
|
|
/*
|
|
* Adapter Init Structure: this is passed to the adapter with the
|
|
* AAC_MONKER_INITSTRUCT command to point it at our control structures.
|
|
*/
|
|
struct aac_adapter_init {
|
|
u_int32_t InitStructRevision;
|
|
u_int32_t MiniPortRevision;
|
|
u_int32_t FilesystemRevision;
|
|
u_int32_t CommHeaderAddress;
|
|
u_int32_t FastIoCommAreaAddress;
|
|
u_int32_t AdapterFibsPhysicalAddress;
|
|
u_int32_t AdapterFibsVirtualAddress;
|
|
u_int32_t AdapterFibsSize;
|
|
u_int32_t AdapterFibAlign;
|
|
u_int32_t PrintfBufferAddress;
|
|
u_int32_t PrintfBufferSize;
|
|
u_int32_t HostPhysMemPages;
|
|
u_int32_t HostElapsedSeconds;
|
|
/* ADAPTER_INIT_STRUCT_REVISION_4 begins here */
|
|
u_int32_t InitFlags; /* flags for supported features */
|
|
u_int32_t MaxIoCommands; /* max outstanding commands */
|
|
u_int32_t MaxIoSize; /* largest I/O command */
|
|
u_int32_t MaxFibSize; /* largest FIB to adapter */
|
|
} __packed;
|
|
|
|
#define AAC_INIT_STRUCT_REVISION 3
|
|
#define AAC_INIT_STRUCT_REVISION_4 4
|
|
#define AAC_INIT_STRUCT_MINIPORT_REVISION 1
|
|
#define AAC_INITFLAGS_NEW_COMM_SUPPORTED 1
|
|
#define AAC_PAGE_SIZE 4096 /* Used to set HostPhysMemPages */
|
|
|
|
/*
|
|
* Shared data types
|
|
*/
|
|
|
|
/*
|
|
* Container types
|
|
*/
|
|
#define CT_NONE 0
|
|
#define CT_VOLUME 1
|
|
#define CT_MIRROR 2
|
|
#define CT_STRIPE 3
|
|
#define CT_RAID5 4
|
|
#define CT_SSRW 5
|
|
#define CT_SSRO 6
|
|
#define CT_MORPH 7
|
|
#define CT_PASSTHRU 8
|
|
#define CT_RAID4 9
|
|
#define CT_RAID10 10 /* stripe of mirror */
|
|
#define CT_RAID00 11 /* stripe of stripe */
|
|
#define CT_VOLUME_OF_MIRRORS 12 /* volume of mirror */
|
|
#define CT_PSEUDO_RAID3 13 /* really raid4 */
|
|
#define CT_RAID50 14 /* stripe of raid5 */
|
|
#define CT_RAID5D 15 /* raid5 distributed hot-sparing */
|
|
#define CT_RAID5D0 16
|
|
#define CT_RAID1E 17 /* extended raid1 mirroring */
|
|
#define CT_RAID6 18
|
|
#define CT_RAID60 19
|
|
|
|
/*
|
|
* Host-addressable object types
|
|
*/
|
|
#define FT_REG 1 /* regular file */
|
|
#define FT_DIR 2 /* directory */
|
|
#define FT_BLK 3 /* "block" device - reserved */
|
|
#define FT_CHR 4 /* "character special" device - reserved */
|
|
#define FT_LNK 5 /* symbolic link */
|
|
#define FT_SOCK 6 /* socket */
|
|
#define FT_FIFO 7 /* fifo */
|
|
#define FT_FILESYS 8 /* ADAPTEC's "FSA"(tm) filesystem */
|
|
#define FT_DRIVE 9 /* phys disk - addressable in scsi by bus/target/lun */
|
|
#define FT_SLICE 10 /* virtual disk - raw volume - slice */
|
|
#define FT_PARTITION 11 /* FSA part, inside slice, container building block */
|
|
#define FT_VOLUME 12 /* Container - Volume Set */
|
|
#define FT_STRIPE 13 /* Container - Stripe Set */
|
|
#define FT_MIRROR 14 /* Container - Mirror Set */
|
|
#define FT_RAID5 15 /* Container - Raid 5 Set */
|
|
#define FT_DATABASE 16 /* Storage object with "foreign" content manager */
|
|
|
|
/*
|
|
* Host-side scatter/gather list for raw commands.
|
|
*/
|
|
struct aac_sg_entryraw {
|
|
u_int32_t Next; /* reserved for FW use */
|
|
u_int32_t Prev; /* reserved for FW use */
|
|
u_int64_t SgAddress;
|
|
u_int32_t SgByteCount;
|
|
u_int32_t Flags; /* reserved for FW use */
|
|
} __packed;
|
|
|
|
struct aac_sg_tableraw {
|
|
u_int32_t SgCount;
|
|
struct aac_sg_entryraw SgEntryRaw[0];
|
|
} __packed;
|
|
|
|
/*
|
|
* Host-side scatter/gather list for 32-bit commands.
|
|
*/
|
|
struct aac_sg_entry {
|
|
u_int32_t SgAddress;
|
|
u_int32_t SgByteCount;
|
|
} __packed;
|
|
|
|
struct aac_sg_table {
|
|
u_int32_t SgCount;
|
|
struct aac_sg_entry SgEntry[0];
|
|
} __packed;
|
|
|
|
/*
|
|
* Host-side scatter/gather list for 64-bit commands.
|
|
*/
|
|
struct aac_sg_entry64 {
|
|
u_int64_t SgAddress;
|
|
u_int32_t SgByteCount;
|
|
} __packed;
|
|
|
|
struct aac_sg_table64 {
|
|
u_int32_t SgCount;
|
|
struct aac_sg_entry64 SgEntry64[0];
|
|
} __packed;
|
|
|
|
/*
|
|
* Container creation data
|
|
*/
|
|
struct aac_container_creation {
|
|
u_int8_t ViaBuildNumber;
|
|
u_int8_t MicroSecond;
|
|
u_int8_t Via; /* 1 = FSU, 2 = API, etc. */
|
|
u_int8_t YearsSince1900;
|
|
u_int32_t Month:4; /* 1-12 */
|
|
u_int32_t Day:6; /* 1-32 */
|
|
u_int32_t Hour:6; /* 0-23 */
|
|
u_int32_t Minute:6; /* 0-59 */
|
|
u_int32_t Second:6; /* 0-59 */
|
|
u_int64_t ViaAdapterSerialNumber;
|
|
} __packed;
|
|
|
|
typedef enum {
|
|
RevApplication = 1,
|
|
RevDkiCli,
|
|
RevNetService,
|
|
RevApi,
|
|
RevFileSysDriver,
|
|
RevMiniportDriver,
|
|
RevAdapterSW,
|
|
RevMonitor,
|
|
RevRemoteApi,
|
|
} RevComponent;
|
|
|
|
struct FsaRevision {
|
|
union {
|
|
struct {
|
|
u_int8_t dash;
|
|
u_int8_t type;
|
|
u_int8_t minor;
|
|
u_int8_t major;
|
|
} comp;
|
|
u_int32_t ul;
|
|
} external;
|
|
u_int32_t buildNumber;
|
|
} __packed;
|
|
|
|
/*
|
|
* Adapter Information
|
|
*/
|
|
|
|
#define CPU_NTSIM 1
|
|
#define CPU_I960 2
|
|
#define CPU_ARM 3
|
|
#define CPU_SPARC 4
|
|
#define CPU_POWERPC 5
|
|
#define CPU_ALPHA 6
|
|
#define CPU_P7 7
|
|
#define CPU_I960_RX 8
|
|
#define CPU__last 9
|
|
|
|
#define CPUI960_JX 1
|
|
#define CPUI960_CX 2
|
|
#define CPUI960_HX 3
|
|
#define CPUI960_RX 4
|
|
#define CPUARM_SA110 5
|
|
#define CPUARM_xxx 6
|
|
#define CPUPPC_603e 7
|
|
#define CPUPPC_xxx 8
|
|
#define CPUI80303 9
|
|
#define CPU_XSCALE_80321 10
|
|
#define CPU_MIPS_4KC 11
|
|
#define CPU_MIPS_5KC 12
|
|
#define CPUSUBTYPE__last 13
|
|
|
|
#define PLAT_NTSIM 1
|
|
#define PLAT_V3ADU 2
|
|
#define PLAT_CYCLONE 3
|
|
#define PLAT_CYCLONE_HD 4
|
|
#define PLAT_BATBOARD 5
|
|
#define PLAT_BATBOARD_HD 6
|
|
#define PLAT_YOLO 7
|
|
#define PLAT_COBRA 8
|
|
#define PLAT_ANAHEIM 9
|
|
#define PLAT_JALAPENO 10
|
|
#define PLAT_QUEENS 11
|
|
#define PLAT_JALAPENO_DELL 12
|
|
#define PLAT_POBLANO 13
|
|
#define PLAT_POBLANO_OPAL 14
|
|
#define PLAT_POBLANO_SL0 15
|
|
#define PLAT_POBLANO_SL1 16
|
|
#define PLAT_POBLANO_SL2 17
|
|
#define PLAT_POBLANO_XXX 18
|
|
#define PLAT_JALAPENO_P2 19
|
|
#define PLAT_HABANERO 20
|
|
#define PLAT_VULCAN 21
|
|
#define PLAT_CRUSADER 22
|
|
#define PLAT_LANCER 23
|
|
#define PLAT_HARRIER 24
|
|
#define PLAT_TERMINATOR 25
|
|
#define PLAT_SKYHAWK 26
|
|
#define PLAT_CORSAIR 27
|
|
#define PLAT_JAGUAR 28
|
|
#define PLAT_SATAHAWK 29
|
|
#define PLAT_SATANATOR 30
|
|
#define PLAT_PROWLER 31
|
|
#define PLAT_BLACKBIRD 32
|
|
#define PLAT_SABREEXPRESS 33
|
|
#define PLAT_INTRUDER 34
|
|
#define PLAT__last 35
|
|
|
|
#define OEM_FLAVOR_ADAPTEC 1
|
|
#define OEM_FLAVOR_DELL 2
|
|
#define OEM_FLAVOR_HP 3
|
|
#define OEM_FLAVOR_IBM 4
|
|
#define OEM_FLAVOR_CPQ 5
|
|
#define OEM_FLAVOR_FSC 6
|
|
#define OEM_FLAVOR_DWS 7
|
|
#define OEM_FLAVOR_BRAND_Z 8
|
|
#define OEM_FLAVOR_LEGEND 9
|
|
#define OEM_FLAVOR_HITACHI 10
|
|
#define OEM_FLAVOR_ESG 11
|
|
#define OEM_FLAVOR_ICP 12
|
|
#define OEM_FLAVOR_SCM 13
|
|
#define OEM_FLAVOR__last 14
|
|
|
|
/*
|
|
* XXX the aac-2622 with no battery present reports PLATFORM_BAT_OPT_PRESENT
|
|
*/
|
|
#define PLATFORM_BAT_REQ_PRESENT 1 /* BATTERY REQUIRED AND PRESENT */
|
|
#define PLATFORM_BAT_REQ_NOTPRESENT 2 /* BATTERY REQUIRED AND NOT PRESENT */
|
|
#define PLATFORM_BAT_OPT_PRESENT 3 /* BATTERY OPTIONAL AND PRESENT */
|
|
#define PLATFORM_BAT_OPT_NOTPRESENT 4 /* BATTERY OPTIONAL AND NOT PRESENT */
|
|
#define PLATFORM_BAT_NOT_SUPPORTED 5 /* BATTERY NOT SUPPORTED */
|
|
|
|
/*
|
|
* options supported by this board
|
|
* there has to be a one to one mapping of these defines and the ones in
|
|
* fsaapi.h, search for FSA_SUPPORT_SNAPSHOT
|
|
*/
|
|
#define AAC_SUPPORTED_SNAPSHOT 0x01
|
|
#define AAC_SUPPORTED_CLUSTERS 0x02
|
|
#define AAC_SUPPORTED_WRITE_CACHE 0x04
|
|
#define AAC_SUPPORTED_64BIT_DATA 0x08
|
|
#define AAC_SUPPORTED_HOST_TIME_FIB 0x10
|
|
#define AAC_SUPPORTED_RAID50 0x20
|
|
#define AAC_SUPPORTED_4GB_WINDOW 0x40
|
|
#define AAC_SUPPORTED_SCSI_UPGRADEABLE 0x80
|
|
#define AAC_SUPPORTED_SOFT_ERR_REPORT 0x100
|
|
#define AAC_SUPPORTED_NOT_RECONDITION 0x200
|
|
#define AAC_SUPPORTED_SGMAP_HOST64 0x400
|
|
#define AAC_SUPPORTED_ALARM 0x800
|
|
#define AAC_SUPPORTED_NONDASD 0x1000
|
|
#define AAC_SUPPORTED_SCSI_MANAGED 0x2000
|
|
#define AAC_SUPPORTED_RAID_SCSI_MODE 0x4000
|
|
#define AAC_SUPPORTED_SUPPLEMENT_ADAPTER_INFO 0x10000
|
|
#define AAC_SUPPORTED_NEW_COMM 0x20000
|
|
#define AAC_SUPPORTED_64BIT_ARRAYSIZE 0x40000
|
|
#define AAC_SUPPORTED_HEAT_SENSOR 0x80000
|
|
|
|
/*
|
|
* Structure used to respond to a RequestAdapterInfo fib.
|
|
*/
|
|
struct aac_adapter_info {
|
|
u_int32_t PlatformBase; /* adapter type */
|
|
u_int32_t CpuArchitecture; /* adapter CPU type */
|
|
u_int32_t CpuVariant; /* adapter CPU subtype */
|
|
u_int32_t ClockSpeed; /* adapter CPU clockspeed */
|
|
u_int32_t ExecutionMem; /* adapter Execution Memory size */
|
|
u_int32_t BufferMem; /* adapter Data Memory */
|
|
u_int32_t TotalMem; /* adapter Total Memory */
|
|
struct FsaRevision KernelRevision; /* adapter Kernel SW Revision */
|
|
struct FsaRevision MonitorRevision; /* adapter Monitor/Diag SW Rev */
|
|
struct FsaRevision HardwareRevision; /* TDB */
|
|
struct FsaRevision BIOSRevision; /* adapter BIOS Revision */
|
|
u_int32_t ClusteringEnabled;
|
|
u_int32_t ClusterChannelMask;
|
|
u_int64_t SerialNumber;
|
|
u_int32_t batteryPlatform;
|
|
u_int32_t SupportedOptions; /* supported features of this ctrlr */
|
|
u_int32_t OemVariant;
|
|
} __packed;
|
|
|
|
/*
|
|
* Monitor/Kernel interface.
|
|
*/
|
|
|
|
/*
|
|
* Synchronous commands to the monitor/kernel.
|
|
*/
|
|
#define AAC_MONKER_BREAKPOINT 0x04
|
|
#define AAC_MONKER_INITSTRUCT 0x05
|
|
#define AAC_MONKER_SYNCFIB 0x0c
|
|
#define AAC_MONKER_GETKERNVER 0x11
|
|
#define AAC_MONKER_POSTRESULTS 0x14
|
|
#define AAC_MONKER_GETINFO 0x19
|
|
#define AAC_MONKER_GETDRVPROP 0x23
|
|
#define AAC_MONKER_RCVTEMP 0x25
|
|
#define AAC_MONKER_GETCOMMPREF 0x26
|
|
#define AAC_MONKER_REINIT 0xee
|
|
|
|
/*
|
|
* Command status values
|
|
*/
|
|
#define ST_OK 0
|
|
#define ST_PERM 1
|
|
#define ST_NOENT 2
|
|
#define ST_IO 5
|
|
#define ST_NXIO 6
|
|
#define ST_E2BIG 7
|
|
#define ST_ACCES 13
|
|
#define ST_EXIST 17
|
|
#define ST_XDEV 18
|
|
#define ST_NODEV 19
|
|
#define ST_NOTDIR 20
|
|
#define ST_ISDIR 21
|
|
#define ST_INVAL 22
|
|
#define ST_FBIG 27
|
|
#define ST_NOSPC 28
|
|
#define ST_ROFS 30
|
|
#define ST_MLINK 31
|
|
#define ST_WOULDBLOCK 35
|
|
#define ST_NAMETOOLONG 63
|
|
#define ST_NOTEMPTY 66
|
|
#define ST_DQUOT 69
|
|
#define ST_STALE 70
|
|
#define ST_REMOTE 71
|
|
#define ST_BADHANDLE 10001
|
|
#define ST_NOT_SYNC 10002
|
|
#define ST_BAD_COOKIE 10003
|
|
#define ST_NOTSUPP 10004
|
|
#define ST_TOOSMALL 10005
|
|
#define ST_SERVERFAULT 10006
|
|
#define ST_BADTYPE 10007
|
|
#define ST_JUKEBOX 10008
|
|
#define ST_NOTMOUNTED 10009
|
|
#define ST_MAINTMODE 10010
|
|
#define ST_STALEACL 10011
|
|
|
|
/*
|
|
* Volume manager commands
|
|
*/
|
|
#define VM_Null 0
|
|
#define VM_NameServe 1
|
|
#define VM_ContainerConfig 2
|
|
#define VM_Ioctl 3
|
|
#define VM_FilesystemIoctl 4
|
|
#define VM_CloseAll 5
|
|
#define VM_CtBlockRead 6
|
|
#define VM_CtBlockWrite 7
|
|
#define VM_SliceBlockRead 8 /* raw access to configured "storage objects" */
|
|
#define VM_SliceBlockWrite 9
|
|
#define VM_DriveBlockRead 10 /* raw access to physical devices */
|
|
#define VM_DriveBlockWrite 11
|
|
#define VM_EnclosureMgt 12 /* enclosure management */
|
|
#define VM_Unused 13 /* used to be diskset management */
|
|
#define VM_CtBlockVerify 14
|
|
#define VM_CtPerf 15 /* performance test */
|
|
#define VM_CtBlockRead64 16
|
|
#define VM_CtBlockWrite64 17
|
|
#define VM_CtBlockVerify64 18
|
|
#define VM_CtHostRead64 19
|
|
#define VM_CtHostWrite64 20
|
|
#define VM_DrvErrTblLog 21 /* drive error table/log type of command */
|
|
#define VM_NameServe64 22
|
|
|
|
/*
|
|
* "Mountable object"
|
|
*/
|
|
struct aac_mntobj {
|
|
u_int32_t ObjectId;
|
|
char FileSystemName[16];
|
|
struct aac_container_creation CreateInfo;
|
|
u_int32_t Capacity;
|
|
u_int32_t VolType;
|
|
u_int32_t ObjType;
|
|
u_int32_t ContentState;
|
|
#define AAC_FSCS_READONLY 0x0002 /* XXX need more information than this */
|
|
union {
|
|
u_int32_t pad[8];
|
|
} ObjExtension;
|
|
u_int32_t AlterEgoId;
|
|
u_int32_t CapacityHigh; /* Only if VM_NameServe64 */
|
|
} __packed;
|
|
|
|
struct aac_mntinfo {
|
|
u_int32_t Command;
|
|
u_int32_t MntType;
|
|
u_int32_t MntCount;
|
|
} __packed;
|
|
|
|
struct aac_mntinforesponse {
|
|
u_int32_t Status;
|
|
u_int32_t MntType;
|
|
u_int32_t MntRespCount;
|
|
struct aac_mntobj MntTable[1];
|
|
} __packed;
|
|
|
|
/*
|
|
* Container shutdown command.
|
|
*/
|
|
struct aac_closecommand {
|
|
u_int32_t Command;
|
|
u_int32_t ContainerId;
|
|
} __packed;
|
|
|
|
/*
|
|
* Container Config Command
|
|
*/
|
|
#define CT_GET_SCSI_METHOD 64
|
|
struct aac_ctcfg {
|
|
u_int32_t Command;
|
|
u_int32_t cmd;
|
|
u_int32_t param;
|
|
} __packed;
|
|
|
|
struct aac_ctcfg_resp {
|
|
u_int32_t Status;
|
|
u_int32_t resp;
|
|
u_int32_t param;
|
|
} __packed;
|
|
|
|
/*
|
|
* 'Ioctl' commads
|
|
*/
|
|
#define AAC_SCSI_MAX_PORTS 10
|
|
#define AAC_BUS_NO_EXIST 0
|
|
#define AAC_BUS_VALID 1
|
|
#define AAC_BUS_FAULTED 2
|
|
#define AAC_BUS_DISABLED 3
|
|
#define GetBusInfo 0x9
|
|
|
|
struct aac_getbusinf {
|
|
u_int32_t ProbeComplete;
|
|
u_int32_t BusCount;
|
|
u_int32_t TargetsPerBus;
|
|
u_int8_t InitiatorBusId[AAC_SCSI_MAX_PORTS];
|
|
u_int8_t BusValid[AAC_SCSI_MAX_PORTS];
|
|
} __packed;
|
|
|
|
struct aac_vmioctl {
|
|
u_int32_t Command;
|
|
u_int32_t ObjType;
|
|
u_int32_t MethId;
|
|
u_int32_t ObjId;
|
|
u_int32_t IoctlCmd;
|
|
u_int32_t IoctlBuf[1]; /* Placeholder? */
|
|
} __packed;
|
|
|
|
struct aac_vmi_businf_resp {
|
|
u_int32_t Status;
|
|
u_int32_t ObjType;
|
|
u_int32_t MethId;
|
|
u_int32_t ObjId;
|
|
u_int32_t IoctlCmd;
|
|
struct aac_getbusinf BusInf;
|
|
} __packed;
|
|
|
|
#if 0
|
|
#define AAC_BTL_TO_HANDLE(b, t, l) \
|
|
(((b & 0x3f) << 7) | ((l & 0x7) << 4) | (t & 0xf))
|
|
#else
|
|
#define AAC_BTL_TO_HANDLE(b, t, l) \
|
|
((((u_int32_t)b & 0x0f) << 24) | \
|
|
(((u_int32_t)l & 0xff) << 16) | \
|
|
((u_int32_t)t & 0xffff))
|
|
#endif
|
|
#define GetDeviceProbeInfo 0x5
|
|
|
|
struct aac_vmi_devinfo_resp {
|
|
u_int32_t Status;
|
|
u_int32_t ObjType;
|
|
u_int32_t MethId;
|
|
u_int32_t ObjId;
|
|
u_int32_t IoctlCmd;
|
|
u_int8_t VendorId[8];
|
|
u_int8_t ProductId[16];
|
|
u_int8_t ProductRev[4];
|
|
u_int32_t Inquiry7;
|
|
u_int32_t align1;
|
|
u_int32_t Inquiry0;
|
|
u_int32_t align2;
|
|
u_int32_t Inquiry1;
|
|
u_int32_t align3;
|
|
u_int32_t reserved[2];
|
|
u_int8_t VendorSpecific[20];
|
|
u_int32_t Smart:1;
|
|
u_int32_t AAC_Managed:1;
|
|
u_int32_t align4;
|
|
u_int32_t reserved2:6;
|
|
u_int32_t Bus;
|
|
u_int32_t Target;
|
|
u_int32_t Lun;
|
|
u_int32_t ultraEnable:1,
|
|
disconnectEnable:1,
|
|
fast20EnabledW:1,
|
|
scamDevice:1,
|
|
scamTolerant:1,
|
|
setForSync:1,
|
|
setForWide:1,
|
|
syncDevice:1,
|
|
wideDevice:1,
|
|
reserved1:7,
|
|
ScsiRate:8,
|
|
ScsiOffset:8;
|
|
}; /* Do not pack */
|
|
|
|
#define ResetBus 0x16
|
|
struct aac_resetbus {
|
|
u_int32_t BusNumber;
|
|
};
|
|
|
|
/*
|
|
* Write 'stability' options.
|
|
*/
|
|
#define CSTABLE 1
|
|
#define CUNSTABLE 2
|
|
|
|
/*
|
|
* Commit level response for a write request.
|
|
*/
|
|
#define CMFILE_SYNC_NVRAM 1
|
|
#define CMDATA_SYNC_NVRAM 2
|
|
#define CMFILE_SYNC 3
|
|
#define CMDATA_SYNC 4
|
|
#define CMUNSTABLE 5
|
|
|
|
/*
|
|
* Block read/write operations. These structures are packed into the 'data'
|
|
* area in the FIB.
|
|
*/
|
|
struct aac_blockread {
|
|
u_int32_t Command; /* not FSACommand! */
|
|
u_int32_t ContainerId;
|
|
u_int32_t BlockNumber;
|
|
u_int32_t ByteCount;
|
|
struct aac_sg_table SgMap; /* variable size */
|
|
} __packed;
|
|
|
|
struct aac_blockread64 {
|
|
u_int32_t Command; /* not FSACommand! */
|
|
u_int16_t ContainerId;
|
|
u_int16_t SectorCount;
|
|
u_int32_t BlockNumber;
|
|
u_int16_t Pad;
|
|
u_int16_t Flags;
|
|
struct aac_sg_table64 SgMap64; /* variable size */
|
|
} __packed;
|
|
|
|
struct aac_blockread_response {
|
|
u_int32_t Status;
|
|
u_int32_t ByteCount;
|
|
} __packed;
|
|
|
|
struct aac_blockwrite {
|
|
u_int32_t Command; /* not FSACommand! */
|
|
u_int32_t ContainerId;
|
|
u_int32_t BlockNumber;
|
|
u_int32_t ByteCount;
|
|
u_int32_t Stable;
|
|
struct aac_sg_table SgMap; /* variable size */
|
|
} __packed;
|
|
|
|
struct aac_blockwrite64 {
|
|
u_int32_t Command; /* not FSACommand! */
|
|
u_int16_t ContainerId;
|
|
u_int16_t SectorCount;
|
|
u_int32_t BlockNumber;
|
|
u_int16_t Pad;
|
|
u_int16_t Flags;
|
|
struct aac_sg_table64 SgMap64; /* variable size */
|
|
} __packed;
|
|
|
|
struct aac_blockwrite_response {
|
|
u_int32_t Status;
|
|
u_int32_t ByteCount;
|
|
u_int32_t Committed;
|
|
} __packed;
|
|
|
|
struct aac_raw_io {
|
|
u_int64_t BlockNumber;
|
|
u_int32_t ByteCount;
|
|
u_int16_t ContainerId;
|
|
u_int16_t Flags; /* 0: W, 1: R */
|
|
u_int16_t BpTotal; /* reserved for FW use */
|
|
u_int16_t BpComplete; /* reserved for FW use */
|
|
struct aac_sg_tableraw SgMapRaw; /* variable size */
|
|
} __packed;
|
|
|
|
struct aac_close_command {
|
|
u_int32_t Command;
|
|
u_int32_t ContainerId;
|
|
} __packed;
|
|
|
|
/*
|
|
* SCSI Passthrough structures
|
|
*/
|
|
struct aac_srb32 {
|
|
u_int32_t function;
|
|
u_int32_t bus;
|
|
u_int32_t target;
|
|
u_int32_t lun;
|
|
u_int32_t timeout;
|
|
u_int32_t flags;
|
|
u_int32_t data_len;
|
|
u_int32_t retry_limit;
|
|
u_int32_t cdb_len;
|
|
u_int8_t cdb[16];
|
|
struct aac_sg_table sg_map32;
|
|
};
|
|
|
|
#define AAC_SRB_FUNC_EXECUTE_SCSI 0x00
|
|
#define AAC_SRB_FUNC_CLAIM_DEVICE 0x01
|
|
#define AAC_SRB_FUNC_IO_CONTROL 0x02
|
|
#define AAC_SRB_FUNC_RECEIVE_EVENT 0x03
|
|
#define AAC_SRB_FUNC_RELEASE_QUEUE 0x04
|
|
#define AAC_SRB_FUNC_ATTACH_DEVICE 0x05
|
|
#define AAC_SRB_FUNC_RELEASE_DEVICE 0x06
|
|
#define AAC_SRB_FUNC_SHUTDOWN 0x07
|
|
#define AAC_SRB_FUNC_FLUSH 0x08
|
|
#define AAC_SRB_FUNC_ABORT_COMMAND 0x10
|
|
#define AAC_SRB_FUNC_RELEASE_RECOVERY 0x11
|
|
#define AAC_SRB_FUNC_RESET_BUS 0x12
|
|
#define AAC_SRB_FUNC_RESET_DEVICE 0x13
|
|
#define AAC_SRB_FUNC_TERMINATE_IO 0x14
|
|
#define AAC_SRB_FUNC_FLUSH_QUEUE 0x15
|
|
#define AAC_SRB_FUNC_REMOVE_DEVICE 0x16
|
|
#define AAC_SRB_FUNC_DOMAIN_VALIDATION 0x17
|
|
|
|
#define AAC_SRB_FLAGS_NO_DATA_XFER 0x0000
|
|
#define AAC_SRB_FLAGS_DISABLE_DISCONNECT 0x0004
|
|
#define AAC_SRB_FLAGS_DISABLE_SYNC_TRANSFER 0x0008
|
|
#define AAC_SRB_FLAGS_BYPASS_FROZEN_QUEUE 0x0010
|
|
#define AAC_SRB_FLAGS_DISABLE_AUTOSENSE 0x0020
|
|
#define AAC_SRB_FLAGS_DATA_IN 0x0040
|
|
#define AAC_SRB_FLAGS_DATA_OUT 0x0080
|
|
#define AAC_SRB_FLAGS_UNSPECIFIED_DIRECTION \
|
|
(AAC_SRB_FLAGS_DATA_IN | AAC_SRB_FLAGS_DATA_OUT)
|
|
|
|
#define AAC_HOST_SENSE_DATA_MAX 30
|
|
|
|
struct aac_srb_response {
|
|
u_int32_t fib_status;
|
|
u_int32_t srb_status;
|
|
u_int32_t scsi_status;
|
|
u_int32_t data_len;
|
|
u_int32_t sense_len;
|
|
u_int8_t sense[AAC_HOST_SENSE_DATA_MAX];
|
|
};
|
|
|
|
/*
|
|
* Status codes for SCSI passthrough commands. Since they are based on ASPI,
|
|
* they also exactly match CAM status codes in both enumeration and meaning.
|
|
* They seem to also be used as status codes for synchronous FIBs.
|
|
*/
|
|
#define AAC_SRB_STS_PENDING 0x00
|
|
#define AAC_SRB_STS_SUCCESS 0x01
|
|
#define AAC_SRB_STS_ABORTED 0x02
|
|
#define AAC_SRB_STS_ABORT_FAILED 0x03
|
|
#define AAC_SRB_STS_ERROR 0x04
|
|
#define AAC_SRB_STS_BUSY 0x05
|
|
#define AAC_SRB_STS_INVALID_REQUEST 0x06
|
|
#define AAC_SRB_STS_INVALID_PATH_ID 0x07
|
|
#define AAC_SRB_STS_NO_DEVICE 0x08
|
|
#define AAC_SRB_STS_TIMEOUT 0x09
|
|
#define AAC_SRB_STS_SELECTION_TIMEOUT 0x0a
|
|
#define AAC_SRB_STS_COMMAND_TIMEOUT 0x0b
|
|
#define AAC_SRB_STS_MESSAGE_REJECTED 0x0d
|
|
#define AAC_SRB_STS_BUS_RESET 0x0e
|
|
#define AAC_SRB_STS_PARITY_ERROR 0x0f
|
|
#define AAC_SRB_STS_REQUEST_SENSE_FAILED 0x10
|
|
#define AAC_SRB_STS_NO_HBA 0x11
|
|
#define AAC_SRB_STS_DATA_OVERRUN 0x12
|
|
#define AAC_SRB_STS_UNEXPECTED_BUS_FREE 0x13
|
|
#define AAC_SRB_STS_PHASE_SEQUENCE_FAILURE 0x14
|
|
#define AAC_SRB_STS_BAD_SRB_BLOCK_LENGTH 0x15
|
|
#define AAC_SRB_STS_REQUEST_FLUSHED 0x16
|
|
#define AAC_SRB_STS_INVALID_LUN 0x20
|
|
#define AAC_SRB_STS_INVALID_TARGET_ID 0x21
|
|
#define AAC_SRB_STS_BAD_FUNCTION 0x22
|
|
#define AAC_SRB_STS_ERROR_RECOVER 0x23
|
|
|
|
/*
|
|
* Register set for adapters based on the Falcon bridge and PPC core
|
|
*/
|
|
|
|
#define AAC_FA_DOORBELL0_CLEAR 0x00
|
|
#define AAC_FA_DOORBELL1_CLEAR 0x02
|
|
#define AAC_FA_DOORBELL0 0x04
|
|
#define AAC_FA_DOORBELL1 0x06
|
|
#define AAC_FA_MASK0_CLEAR 0x08
|
|
#define AAC_FA_MASK1_CLEAR 0x0a
|
|
#define AAC_FA_MASK0 0x0c
|
|
#define AAC_FA_MASK1 0x0e
|
|
#define AAC_FA_MAILBOX 0x10
|
|
#define AAC_FA_FWSTATUS 0x2c /* Mailbox 7 */
|
|
#define AAC_FA_INTSRC 0x900
|
|
|
|
#define AAC_FA_HACK(sc) (void)AAC_GETREG4(sc, AAC_FA_INTSRC)
|
|
|
|
/*
|
|
* Register definitions for the Adaptec AAC-364 'Jalapeno I/II' adapters, based
|
|
* on the SA110 'StrongArm'.
|
|
*/
|
|
|
|
#define AAC_REGSIZE 0x100
|
|
|
|
/* doorbell 0 (adapter->host) */
|
|
#define AAC_SA_DOORBELL0_CLEAR 0x98
|
|
#define AAC_SA_DOORBELL0_SET 0x9c
|
|
#define AAC_SA_DOORBELL0 0x9c
|
|
#define AAC_SA_MASK0_CLEAR 0xa0
|
|
#define AAC_SA_MASK0_SET 0xa4
|
|
|
|
/* doorbell 1 (host->adapter) */
|
|
#define AAC_SA_DOORBELL1_CLEAR 0x9a
|
|
#define AAC_SA_DOORBELL1_SET 0x9e
|
|
#define AAC_SA_MASK1_CLEAR 0xa2
|
|
#define AAC_SA_MASK1_SET 0xa6
|
|
|
|
/* mailbox (20 bytes) */
|
|
#define AAC_SA_MAILBOX 0xa8
|
|
#define AAC_SA_FWSTATUS 0xc4
|
|
|
|
/*
|
|
* Register definitions for the Adaptec 'Pablano' adapters, based on the
|
|
* i960Rx, and other related adapters.
|
|
*/
|
|
|
|
#define AAC_RX_IDBR 0x20 /* inbound doorbell */
|
|
#define AAC_RX_IISR 0x24 /* inbound interrupt status */
|
|
#define AAC_RX_IIMR 0x28 /* inbound interrupt mask */
|
|
#define AAC_RX_ODBR 0x2c /* outbound doorbell */
|
|
#define AAC_RX_OISR 0x30 /* outbound interrupt status */
|
|
#define AAC_RX_OIMR 0x34 /* outbound interrupt mask */
|
|
#define AAC_RX_IQUE 0x40 /* inbound queue */
|
|
#define AAC_RX_OQUE 0x44 /* outbound queue */
|
|
|
|
#define AAC_RX_MAILBOX 0x50 /* mailbox (20 bytes) */
|
|
#define AAC_RX_FWSTATUS 0x6c
|
|
|
|
/*
|
|
* Register definitions for the Adaptec 'Rocket' RAID-On-Chip adapters.
|
|
* Unsurprisingly, it's quite similar to the i960!
|
|
*/
|
|
|
|
#define AAC_RKT_IDBR 0x20 /* inbound doorbell register */
|
|
#define AAC_RKT_IISR 0x24 /* inbound interrupt status register */
|
|
#define AAC_RKT_IIMR 0x28 /* inbound interrupt mask register */
|
|
#define AAC_RKT_ODBR 0x2c /* outbound doorbell register */
|
|
#define AAC_RKT_OISR 0x30 /* outbound interrupt status register */
|
|
#define AAC_RKT_OIMR 0x34 /* outbound interrupt mask register */
|
|
#define AAC_RKT_IQUE 0x40 /* inbound queue */
|
|
#define AAC_RKT_OQUE 0x44 /* outbound queue */
|
|
|
|
#define AAC_RKT_MAILBOX 0x1000 /* mailbox */
|
|
#define AAC_RKT_FWSTATUS 0x101c /* Firmware Status (mailbox 7) */
|
|
|
|
/*
|
|
* Common bit definitions for the doorbell registers.
|
|
*/
|
|
|
|
/*
|
|
* Status bits in the doorbell registers.
|
|
*/
|
|
#define AAC_DB_SYNC_COMMAND (1<<0) /* send/completed synchronous FIB */
|
|
#define AAC_DB_COMMAND_READY (1<<1) /* posted one or more commands */
|
|
#define AAC_DB_RESPONSE_READY (1<<2) /* one or more commands complete */
|
|
#define AAC_DB_COMMAND_NOT_FULL (1<<3) /* command queue not full */
|
|
#define AAC_DB_RESPONSE_NOT_FULL (1<<4) /* response queue not full */
|
|
|
|
/*
|
|
* The adapter can request the host print a message by setting the
|
|
* DB_PRINTF flag in DOORBELL0. The driver responds by collecting the
|
|
* message from the printf buffer, clearing the DB_PRINTF flag in
|
|
* DOORBELL0 and setting it in DOORBELL1.
|
|
* (ODBR and IDBR respectively for the i960Rx adapters)
|
|
*/
|
|
#define AAC_DB_PRINTF (1<<5) /* adapter requests host printf */
|
|
#define AAC_PRINTF_DONE (1<<5) /* host completed printf processing */
|
|
|
|
/*
|
|
* Mask containing the interrupt bits we care about. We don't anticipate
|
|
* (or want) interrupts not in this mask.
|
|
*/
|
|
#define AAC_DB_INTERRUPTS \
|
|
(AAC_DB_COMMAND_READY | AAC_DB_RESPONSE_READY | AAC_DB_PRINTF)
|
|
#define AAC_DB_INT_NEW_COMM 0x08
|
|
|
|
/*
|
|
* Queue names
|
|
*
|
|
* Note that we base these at 0 in order to use them as array indices. Adaptec
|
|
* used base 1 for some unknown reason, and sorted them in a different order.
|
|
*/
|
|
#define AAC_HOST_NORM_CMD_QUEUE 0
|
|
#define AAC_HOST_HIGH_CMD_QUEUE 1
|
|
#define AAC_ADAP_NORM_CMD_QUEUE 2
|
|
#define AAC_ADAP_HIGH_CMD_QUEUE 3
|
|
#define AAC_HOST_NORM_RESP_QUEUE 4
|
|
#define AAC_HOST_HIGH_RESP_QUEUE 5
|
|
#define AAC_ADAP_NORM_RESP_QUEUE 6
|
|
#define AAC_ADAP_HIGH_RESP_QUEUE 7
|
|
|
|
/*
|
|
* List structure used to chain FIBs (used by the adapter - we hang FIBs off
|
|
* our private command structure and don't touch these)
|
|
*/
|
|
struct aac_fib_list_entry {
|
|
u_int32_t Flink;
|
|
u_int32_t Blink;
|
|
} __packed;
|
|
|
|
/*
|
|
* FIB (FSA Interface Block?); this is the datastructure passed between the
|
|
* host and adapter.
|
|
*/
|
|
struct aac_fib_header {
|
|
u_int32_t XferState;
|
|
u_int16_t Command;
|
|
u_int8_t StructType;
|
|
u_int8_t Flags;
|
|
u_int16_t Size;
|
|
u_int16_t SenderSize;
|
|
u_int32_t SenderFibAddress;
|
|
u_int32_t ReceiverFibAddress;
|
|
u_int32_t SenderData;
|
|
union {
|
|
struct {
|
|
u_int32_t ReceiverTimeStart;
|
|
u_int32_t ReceiverTimeDone;
|
|
} _s;
|
|
struct aac_fib_list_entry FibLinks;
|
|
} _u;
|
|
} __packed;
|
|
|
|
#define AAC_FIB_DATASIZE (512 - sizeof(struct aac_fib_header))
|
|
|
|
struct aac_fib {
|
|
struct aac_fib_header Header;
|
|
u_int8_t data[AAC_FIB_DATASIZE];
|
|
} __packed;
|
|
|
|
/*
|
|
* FIB commands
|
|
*/
|
|
#define TestCommandResponse 1
|
|
#define TestAdapterCommand 2
|
|
|
|
/* Lowlevel and comm commands */
|
|
#define LastTestCommand 100
|
|
#define ReinitHostNormCommandQueue 101
|
|
#define ReinitHostHighCommandQueue 102
|
|
#define ReinitHostHighRespQueue 103
|
|
#define ReinitHostNormRespQueue 104
|
|
#define ReinitAdapNormCommandQueue 105
|
|
#define ReinitAdapHighCommandQueue 107
|
|
#define ReinitAdapHighRespQueue 108
|
|
#define ReinitAdapNormRespQueue 109
|
|
#define InterfaceShutdown 110
|
|
#define DmaCommandFib 120
|
|
#define StartProfile 121
|
|
#define TermProfile 122
|
|
#define SpeedTest 123
|
|
#define TakeABreakPt 124
|
|
#define RequestPerfData 125
|
|
#define SetInterruptDefTimer 126
|
|
#define SetInterruptDefCount 127
|
|
#define GetInterruptDefStatus 128
|
|
#define LastCommCommand 129
|
|
|
|
/* filesystem commands */
|
|
#define NuFileSystem 300
|
|
#define UFS 301
|
|
#define HostFileSystem 302
|
|
#define LastFileSystemCommand 303
|
|
|
|
/* Container Commands */
|
|
#define ContainerCommand 500
|
|
#define ContainerCommand64 501
|
|
#define RawIo 502
|
|
|
|
/* Cluster Commands */
|
|
#define ClusterCommand 550
|
|
|
|
/* Scsi Port commands (scsi passthrough) */
|
|
#define ScsiPortCommand 600
|
|
#define ScsiPortCommandU64 601
|
|
#define SataPortCommandU64 602
|
|
#define SasSmpPassThrough 603
|
|
#define SasRequestPhyInfo 612
|
|
|
|
/* Misc house keeping and generic adapter initiated commands */
|
|
#define AifRequest 700
|
|
#define CheckRevision 701
|
|
#define FsaHostShutdown 702
|
|
#define RequestAdapterInfo 703
|
|
#define IsAdapterPaused 704
|
|
#define SendHostTime 705
|
|
#define RequestSupplementAdapterInfo 706 /* Supp. Info for set in UCC
|
|
* use only if supported
|
|
* (RequestAdapterInfo first) */
|
|
#define LastMiscCommand 707
|
|
|
|
#define OnLineDiagnostic 800
|
|
#define FduAdapterTest 801
|
|
#define RequestCompatibilityId 802
|
|
#define AdapterEnvironmentInfo 803 /* temp. sensors */
|
|
|
|
#define NvsramEventLog 900
|
|
#define ResetNvsramEventLogPointers 901
|
|
#define EnableEventLog 902
|
|
#define DisableEventLog 903
|
|
#define EncryptedKeyTransportFIB 904
|
|
#define KeyableFeaturesFIB 905
|
|
|
|
/*
|
|
* FIB types
|
|
*/
|
|
#define AAC_FIBTYPE_TFIB 1
|
|
#define AAC_FIBTYPE_TQE 2
|
|
#define AAC_FIBTYPE_TCTPERF 3
|
|
|
|
/*
|
|
* FIB transfer state
|
|
*/
|
|
#define AAC_FIBSTATE_HOSTOWNED (1<<0) /* owned by the host */
|
|
#define AAC_FIBSTATE_ADAPTEROWNED (1<<1) /* owned by the adapter */
|
|
#define AAC_FIBSTATE_INITIALISED (1<<2) /* initialised */
|
|
#define AAC_FIBSTATE_EMPTY (1<<3) /* empty */
|
|
#define AAC_FIBSTATE_FROMPOOL (1<<4) /* allocated from pool */
|
|
#define AAC_FIBSTATE_FROMHOST (1<<5) /* sent from the host */
|
|
#define AAC_FIBSTATE_FROMADAP (1<<6) /* sent from the adapter */
|
|
#define AAC_FIBSTATE_REXPECTED (1<<7) /* response is expected */
|
|
#define AAC_FIBSTATE_RNOTEXPECTED (1<<8) /* response is not expected */
|
|
#define AAC_FIBSTATE_DONEADAP (1<<9) /* processed by the adapter */
|
|
#define AAC_FIBSTATE_DONEHOST (1<<10) /* processed by the host */
|
|
#define AAC_FIBSTATE_HIGH (1<<11) /* high priority */
|
|
#define AAC_FIBSTATE_NORM (1<<12) /* normal priority */
|
|
#define AAC_FIBSTATE_ASYNC (1<<13)
|
|
#define AAC_FIBSTATE_ASYNCIO (1<<13) /* to be removed */
|
|
#define AAC_FIBSTATE_PAGEFILEIO (1<<14) /* to be removed */
|
|
#define AAC_FIBSTATE_SHUTDOWN (1<<15)
|
|
#define AAC_FIBSTATE_LAZYWRITE (1<<16) /* to be removed */
|
|
#define AAC_FIBSTATE_ADAPMICROFIB (1<<17)
|
|
#define AAC_FIBSTATE_BIOSFIB (1<<18)
|
|
#define AAC_FIBSTATE_FAST_RESPONSE (1<<19) /* fast response capable */
|
|
#define AAC_FIBSTATE_APIFIB (1<<20)
|
|
|
|
/*
|
|
* FIB error values
|
|
*/
|
|
#define AAC_ERROR_NORMAL 0x00
|
|
#define AAC_ERROR_PENDING 0x01
|
|
#define AAC_ERROR_FATAL 0x02
|
|
#define AAC_ERROR_INVALID_QUEUE 0x03
|
|
#define AAC_ERROR_NOENTRIES 0x04
|
|
#define AAC_ERROR_SENDFAILED 0x05
|
|
#define AAC_ERROR_INVALID_QUEUE_PRIORITY 0x06
|
|
#define AAC_ERROR_FIB_ALLOCATION_FAILED 0x07
|
|
#define AAC_ERROR_FIB_DEALLOCATION_FAILED 0x08
|
|
|
|
/*
|
|
* Adapter Status Register
|
|
*
|
|
* Phase Staus mailbox is 32bits:
|
|
* <31:16> = Phase Status
|
|
* <15:0> = Phase
|
|
*
|
|
* The adapter reports its present state through the phase. Only
|
|
* a single phase should be ever be set. Each phase can have multiple
|
|
* phase status bits to provide more detailed information about the
|
|
* state of the adapter.
|
|
*/
|
|
#define AAC_SELF_TEST_FAILED 0x00000004
|
|
#define AAC_MONITOR_PANIC 0x00000020
|
|
#define AAC_UP_AND_RUNNING 0x00000080
|
|
#define AAC_KERNEL_PANIC 0x00000100
|
|
|
|
/*
|
|
* Data types relating to control and monitoring of the NVRAM/WriteCache
|
|
* subsystem.
|
|
*/
|
|
|
|
#define AAC_NFILESYS 24 /* maximum number of filesystems */
|
|
|
|
/*
|
|
* NVRAM/Write Cache subsystem states
|
|
*/
|
|
typedef enum {
|
|
NVSTATUS_DISABLED = 0, /* present, clean, not being used */
|
|
NVSTATUS_ENABLED, /* present, possibly dirty, ready for use */
|
|
NVSTATUS_ERROR, /* present, dirty, contains dirty data */
|
|
NVSTATUS_BATTERY, /* present, bad or low battery, may contain
|
|
* dirty data */
|
|
NVSTATUS_UNKNOWN /* for bad/missing device */
|
|
} AAC_NVSTATUS;
|
|
|
|
/*
|
|
* NVRAM/Write Cache subsystem battery component states
|
|
*
|
|
*/
|
|
typedef enum {
|
|
NVBATTSTATUS_NONE = 0, /* battery has no power or is not present */
|
|
NVBATTSTATUS_LOW, /* battery is low on power */
|
|
NVBATTSTATUS_OK, /* battery is okay - normal operation possible
|
|
* only in this state */
|
|
NVBATTSTATUS_RECONDITIONING /* no battery present - reconditioning
|
|
* in process */
|
|
} AAC_NVBATTSTATUS;
|
|
|
|
/*
|
|
* Battery transition type
|
|
*/
|
|
typedef enum {
|
|
NVBATT_TRANSITION_NONE = 0, /* battery now has no power or is not
|
|
* present */
|
|
NVBATT_TRANSITION_LOW, /* battery is now low on power */
|
|
NVBATT_TRANSITION_OK /* battery is now okay - normal
|
|
* operation possible only in this
|
|
* state */
|
|
} AAC_NVBATT_TRANSITION;
|
|
|
|
/*
|
|
* NVRAM Info structure returned for NVRAM_GetInfo call
|
|
*/
|
|
struct aac_nvramdevinfo {
|
|
u_int32_t NV_Enabled; /* write caching enabled */
|
|
u_int32_t NV_Error; /* device in error state */
|
|
u_int32_t NV_NDirty; /* count of dirty NVRAM buffers */
|
|
u_int32_t NV_NActive; /* count of NVRAM buffers being
|
|
* written */
|
|
} __packed;
|
|
|
|
struct aac_nvraminfo {
|
|
AAC_NVSTATUS NV_Status; /* nvram subsystem status */
|
|
AAC_NVBATTSTATUS NV_BattStatus; /* battery status */
|
|
u_int32_t NV_Size; /* size of WriteCache NVRAM in
|
|
* bytes */
|
|
u_int32_t NV_BufSize; /* size of NVRAM buffers in
|
|
* bytes */
|
|
u_int32_t NV_NBufs; /* number of NVRAM buffers */
|
|
u_int32_t NV_NDirty; /* Num dirty NVRAM buffers */
|
|
u_int32_t NV_NClean; /* Num clean NVRAM buffers */
|
|
u_int32_t NV_NActive; /* Num NVRAM buffers being
|
|
* written */
|
|
u_int32_t NV_NBrokered; /* Num brokered NVRAM buffers */
|
|
struct aac_nvramdevinfo NV_DevInfo[AAC_NFILESYS]; /* per device
|
|
* info */
|
|
u_int32_t NV_BattNeedsReconditioning; /* boolean */
|
|
u_int32_t NV_TotalSize; /* size of all non-volatile
|
|
* memories in bytes */
|
|
} __packed;
|
|
|
|
/*
|
|
* Data types relating to adapter-initiated FIBs
|
|
*
|
|
* Based on types and structures in <aifstruc.h>
|
|
*/
|
|
|
|
/*
|
|
* Progress Reports
|
|
*/
|
|
typedef enum {
|
|
AifJobStsSuccess = 1,
|
|
AifJobStsFinished,
|
|
AifJobStsAborted,
|
|
AifJobStsFailed,
|
|
AifJobStsLastReportMarker = 100, /* All prior mean last report */
|
|
AifJobStsSuspended,
|
|
AifJobStsRunning
|
|
} AAC_AifJobStatus;
|
|
|
|
typedef enum {
|
|
AifJobScsiMin = 1, /* Minimum value for Scsi operation */
|
|
AifJobScsiZero, /* SCSI device clear operation */
|
|
AifJobScsiVerify, /* SCSI device Verify operation NO
|
|
* REPAIR */
|
|
AifJobScsiExercise, /* SCSI device Exercise operation */
|
|
AifJobScsiVerifyRepair, /* SCSI device Verify operation WITH
|
|
* repair */
|
|
AifJobScsiWritePattern, /* write pattern */
|
|
AifJobScsiMax = 99, /* Max Scsi value */
|
|
AifJobCtrMin, /* Min Ctr op value */
|
|
AifJobCtrZero, /* Container clear operation */
|
|
AifJobCtrCopy, /* Container copy operation */
|
|
AifJobCtrCreateMirror, /* Container Create Mirror operation */
|
|
AifJobCtrMergeMirror, /* Container Merge Mirror operation */
|
|
AifJobCtrScrubMirror, /* Container Scrub Mirror operation */
|
|
AifJobCtrRebuildRaid5, /* Container Rebuild Raid5 operation */
|
|
AifJobCtrScrubRaid5, /* Container Scrub Raid5 operation */
|
|
AifJobCtrMorph, /* Container morph operation */
|
|
AifJobCtrPartCopy, /* Container Partition copy operation */
|
|
AifJobCtrRebuildMirror, /* Container Rebuild Mirror operation */
|
|
AifJobCtrCrazyCache, /* crazy cache */
|
|
AifJobCtrCopyback, /* Container Copyback operation */
|
|
AifJobCtrCompactRaid5D, /* Container Compaction operation */
|
|
AifJobCtrExpandRaid5D, /* Container Expansion operation */
|
|
AifJobCtrRebuildRaid6, /* Container Rebuild Raid6 operation */
|
|
AifJobCtrScrubRaid6, /* Container Scrub Raid6 operation */
|
|
AifJobCtrSSBackup, /* Container snapshot backup task */
|
|
AifJobCtrMax = 199, /* Max Ctr type operation */
|
|
AifJobFsMin, /* Min Fs type operation */
|
|
AifJobFsCreate, /* File System Create operation */
|
|
AifJobFsVerify, /* File System Verify operation */
|
|
AifJobFsExtend, /* File System Extend operation */
|
|
AifJobFsMax = 299, /* Max Fs type operation */
|
|
AifJobApiFormatNTFS, /* Format a drive to NTFS */
|
|
AifJobApiFormatFAT, /* Format a drive to FAT */
|
|
AifJobApiUpdateSnapshot, /* update the read/write half of a
|
|
* snapshot */
|
|
AifJobApiFormatFAT32, /* Format a drive to FAT32 */
|
|
AifJobApiMax = 399, /* Max API type operation */
|
|
AifJobCtlContinuousCtrVerify, /* Adapter operation */
|
|
AifJobCtlMax = 499 /* Max Adapter type operation */
|
|
} AAC_AifJobType;
|
|
|
|
struct aac_AifContainers {
|
|
u_int32_t src; /* from/master */
|
|
u_int32_t dst; /* to/slave */
|
|
} __packed;
|
|
|
|
union aac_AifJobClient {
|
|
struct aac_AifContainers container; /* For Container and
|
|
* filesystem progress
|
|
* ops; */
|
|
int32_t scsi_dh; /* For SCSI progress
|
|
* ops */
|
|
};
|
|
|
|
struct aac_AifJobDesc {
|
|
u_int32_t jobID; /* DO NOT FILL IN! Will be
|
|
* filled in by AIF */
|
|
AAC_AifJobType type; /* Operation that is being
|
|
* performed */
|
|
union aac_AifJobClient client; /* Details */
|
|
} __packed;
|
|
|
|
struct aac_AifJobProgressReport {
|
|
struct aac_AifJobDesc jd;
|
|
AAC_AifJobStatus status;
|
|
u_int32_t finalTick;
|
|
u_int32_t currentTick;
|
|
u_int32_t jobSpecificData1;
|
|
u_int32_t jobSpecificData2;
|
|
} __packed;
|
|
|
|
/*
|
|
* Event Notification
|
|
*/
|
|
typedef enum {
|
|
/* General application notifies start here */
|
|
AifEnGeneric = 1, /* Generic notification */
|
|
AifEnTaskComplete, /* Task has completed */
|
|
AifEnConfigChange, /* Adapter config change occurred */
|
|
AifEnContainerChange, /* Adapter specific container
|
|
* configuration change */
|
|
AifEnDeviceFailure, /* SCSI device failed */
|
|
AifEnMirrorFailover, /* Mirror failover started */
|
|
AifEnContainerEvent, /* Significant container event */
|
|
AifEnFileSystemChange, /* File system changed */
|
|
AifEnConfigPause, /* Container pause event */
|
|
AifEnConfigResume, /* Container resume event */
|
|
AifEnFailoverChange, /* Failover space assignment changed */
|
|
AifEnRAID5RebuildDone, /* RAID5 rebuild finished */
|
|
AifEnEnclosureManagement, /* Enclosure management event */
|
|
AifEnBatteryEvent, /* Significant NV battery event */
|
|
AifEnAddContainer, /* A new container was created. */
|
|
AifEnDeleteContainer, /* A container was deleted. */
|
|
AifEnSMARTEvent, /* SMART Event */
|
|
AifEnBatteryNeedsRecond, /* The battery needs reconditioning */
|
|
AifEnClusterEvent, /* Some cluster event */
|
|
AifEnDiskSetEvent, /* A disk set event occured. */
|
|
AifDriverNotifyStart=199, /* Notifies for host driver go here */
|
|
/* Host driver notifications start here */
|
|
AifDenMorphComplete, /* A morph operation completed */
|
|
AifDenVolumeExtendComplete /* Volume expand operation completed */
|
|
} AAC_AifEventNotifyType;
|
|
|
|
struct aac_AifEnsGeneric {
|
|
char text[132]; /* Generic text */
|
|
} __packed;
|
|
|
|
struct aac_AifEnsDeviceFailure {
|
|
u_int32_t deviceHandle; /* SCSI device handle */
|
|
} __packed;
|
|
|
|
struct aac_AifEnsMirrorFailover {
|
|
u_int32_t container; /* Container with failed element */
|
|
u_int32_t failedSlice; /* Old slice which failed */
|
|
u_int32_t creatingSlice; /* New slice used for auto-create */
|
|
} __packed;
|
|
|
|
struct aac_AifEnsContainerChange {
|
|
u_int32_t container[2]; /* container that changed, -1 if no
|
|
* container */
|
|
} __packed;
|
|
|
|
struct aac_AifEnsContainerEvent {
|
|
u_int32_t container; /* container number */
|
|
u_int32_t eventType; /* event type */
|
|
} __packed;
|
|
|
|
struct aac_AifEnsEnclosureEvent {
|
|
u_int32_t empID; /* enclosure management proc number */
|
|
u_int32_t unitID; /* unitId, fan id, power supply id,
|
|
* slot id, tempsensor id. */
|
|
u_int32_t eventType; /* event type */
|
|
} __packed;
|
|
|
|
struct aac_AifEnsBatteryEvent {
|
|
AAC_NVBATT_TRANSITION transition_type; /* eg from low to ok */
|
|
AAC_NVBATTSTATUS current_state; /* current batt state */
|
|
AAC_NVBATTSTATUS prior_state; /* prev batt state */
|
|
} __packed;
|
|
|
|
struct aac_AifEnsDiskSetEvent {
|
|
u_int32_t eventType;
|
|
u_int64_t DsNum;
|
|
u_int64_t CreatorId;
|
|
} __packed;
|
|
|
|
typedef enum {
|
|
CLUSTER_NULL_EVENT = 0,
|
|
CLUSTER_PARTNER_NAME_EVENT, /* change in partner hostname or
|
|
* adaptername from NULL to non-NULL */
|
|
/* (partner's agent may be up) */
|
|
CLUSTER_PARTNER_NULL_NAME_EVENT /* change in partner hostname or
|
|
* adaptername from non-null to NULL */
|
|
/* (partner has rebooted) */
|
|
} AAC_ClusterAifEvent;
|
|
|
|
struct aac_AifEnsClusterEvent {
|
|
AAC_ClusterAifEvent eventType;
|
|
} __packed;
|
|
|
|
struct aac_AifEventNotify {
|
|
AAC_AifEventNotifyType type;
|
|
union {
|
|
struct aac_AifEnsGeneric EG;
|
|
struct aac_AifEnsDeviceFailure EDF;
|
|
struct aac_AifEnsMirrorFailover EMF;
|
|
struct aac_AifEnsContainerChange ECC;
|
|
struct aac_AifEnsContainerEvent ECE;
|
|
struct aac_AifEnsEnclosureEvent EEE;
|
|
struct aac_AifEnsBatteryEvent EBE;
|
|
struct aac_AifEnsDiskSetEvent EDS;
|
|
/* struct aac_AifEnsSMARTEvent ES;*/
|
|
struct aac_AifEnsClusterEvent ECLE;
|
|
} data;
|
|
} __packed;
|
|
|
|
/*
|
|
* Adapter Initiated FIB command structures. Start with the adapter
|
|
* initiated FIBs that really come from the adapter, and get responded
|
|
* to by the host.
|
|
*/
|
|
#define AAC_AIF_REPORT_MAX_SIZE 64
|
|
|
|
typedef enum {
|
|
AifCmdEventNotify = 1, /* Notify of event */
|
|
AifCmdJobProgress, /* Progress report */
|
|
AifCmdAPIReport, /* Report from other user of API */
|
|
AifCmdDriverNotify, /* Notify host driver of event */
|
|
AifReqJobList = 100, /* Gets back complete job list */
|
|
AifReqJobsForCtr, /* Gets back jobs for specific container */
|
|
AifReqJobsForScsi, /* Gets back jobs for specific SCSI device */
|
|
AifReqJobReport, /* Gets back a specific job report or list */
|
|
AifReqTerminateJob, /* Terminates job */
|
|
AifReqSuspendJob, /* Suspends a job */
|
|
AifReqResumeJob, /* Resumes a job */
|
|
AifReqSendAPIReport, /* API generic report requests */
|
|
AifReqAPIJobStart, /* Start a job from the API */
|
|
AifReqAPIJobUpdate, /* Update a job report from the API */
|
|
AifReqAPIJobFinish /* Finish a job from the API */
|
|
} AAC_AifCommand;
|
|
|
|
struct aac_aif_command {
|
|
AAC_AifCommand command; /* Tell host what type of
|
|
* notify this is */
|
|
u_int32_t seqNumber; /* To allow ordering of
|
|
* reports (if necessary) */
|
|
union {
|
|
struct aac_AifEventNotify EN; /* Event notify */
|
|
struct aac_AifJobProgressReport PR[1]; /* Progress report */
|
|
u_int8_t AR[AAC_AIF_REPORT_MAX_SIZE];
|
|
u_int8_t data[AAC_FIB_DATASIZE - 8];
|
|
} data;
|
|
} __packed;
|
|
|
|
#endif /* !_PCI_AACREG_H_ */
|